Annotation of embedaddon/pimd/include/openbsd/netinet/ip_mroute.h, revision 1.1.1.1
1.1 misho 1: /* $OpenBSD: ip_mroute.h,v 1.15 2009/07/13 19:14:29 michele Exp $ */
2: /* $NetBSD: ip_mroute.h,v 1.23 2004/04/21 17:49:46 itojun Exp $ */
3:
4: #ifndef _NETINET_IP_MROUTE_H_
5: #define _NETINET_IP_MROUTE_H_
6:
7: /*
8: * Definitions for IP multicast forwarding.
9: *
10: * Written by David Waitzman, BBN Labs, August 1988.
11: * Modified by Steve Deering, Stanford, February 1989.
12: * Modified by Ajit Thyagarajan, PARC, August 1993.
13: * Modified by Ajit Thyagarajan, PARC, August 1994.
14: * Modified by Ahmed Helmy, SGI, June 1996.
15: * Modified by Pavlin Radoslavov, ICSI, October 2002.
16: *
17: * MROUTING Revision: 1.2
18: * and PIM-SMv2 and PIM-DM support, advanced API support,
19: * bandwidth metering and signaling.
20: */
21:
22: #include <sys/queue.h>
23: #include <sys/timeout.h>
24:
25: /*
26: * Multicast Routing set/getsockopt commands.
27: */
28: #define MRT_INIT 100 /* initialize forwarder */
29: #define MRT_DONE 101 /* shut down forwarder */
30: #define MRT_ADD_VIF 102 /* create virtual interface */
31: #define MRT_DEL_VIF 103 /* delete virtual interface */
32: #define MRT_ADD_MFC 104 /* insert forwarding cache entry */
33: #define MRT_DEL_MFC 105 /* delete forwarding cache entry */
34: #define MRT_VERSION 106 /* get kernel version number */
35: #define MRT_ASSERT 107 /* enable assert processing */
36: #define MRT_PIM MRT_ASSERT /* enable PIM processing */
37: #define MRT_API_SUPPORT 109 /* supported MRT API */
38: #define MRT_API_CONFIG 110 /* config MRT API */
39: #define MRT_ADD_BW_UPCALL 111 /* create bandwidth monitor */
40: #define MRT_DEL_BW_UPCALL 112 /* delete bandwidth monitor */
41:
42:
43: /*
44: * Types and macros for handling bitmaps with one bit per virtual interface.
45: */
46: #define MAXVIFS 32
47: typedef u_int32_t vifbitmap_t;
48: typedef u_int16_t vifi_t; /* type of a vif index */
49:
50: #define VIFM_SET(n, m) ((m) |= (1 << (n)))
51: #define VIFM_CLR(n, m) ((m) &= ~(1 << (n)))
52: #define VIFM_ISSET(n, m) ((m) & (1 << (n)))
53: #define VIFM_SETALL(m) ((m) = 0xffffffff)
54: #define VIFM_CLRALL(m) ((m) = 0x00000000)
55: #define VIFM_COPY(mfrom, mto) ((mto) = (mfrom))
56: #define VIFM_SAME(m1, m2) ((m1) == (m2))
57:
58: #define VIFF_TUNNEL 0x1 /* vif represents a tunnel end-point */
59: #define VIFF_SRCRT 0x2 /* tunnel uses IP src routing */
60: #define VIFF_REGISTER 0x4 /* used for PIM Register encap/decap */
61:
62: /*
63: * Argument structure for MRT_ADD_VIF.
64: * (MRT_DEL_VIF takes a single vifi_t argument.)
65: */
66: struct vifctl {
67: vifi_t vifc_vifi; /* the index of the vif to be added */
68: u_int8_t vifc_flags; /* VIFF_ flags defined above */
69: u_int8_t vifc_threshold; /* min ttl required to forward on vif */
70: u_int32_t vifc_rate_limit; /* ignored */
71: struct in_addr vifc_lcl_addr;/* local interface address */
72: struct in_addr vifc_rmt_addr;/* remote address (tunnels only) */
73: };
74:
75: /*
76: * Argument structure for MRT_ADD_MFC and MRT_DEL_MFC.
77: * XXX if you change this, make sure to change struct mfcctl2 as well.
78: */
79: struct mfcctl {
80: struct in_addr mfcc_origin; /* ip origin of mcasts */
81: struct in_addr mfcc_mcastgrp; /* multicast group associated */
82: vifi_t mfcc_parent; /* incoming vif */
83: u_int8_t mfcc_ttls[MAXVIFS]; /* forwarding ttls on vifs */
84: };
85:
86: /*
87: * The new argument structure for MRT_ADD_MFC and MRT_DEL_MFC overlays
88: * and extends the old struct mfcctl.
89: */
90: struct mfcctl2 {
91: /* the mfcctl fields */
92: struct in_addr mfcc_origin; /* ip origin of mcasts */
93: struct in_addr mfcc_mcastgrp; /* multicast group associated*/
94: vifi_t mfcc_parent; /* incoming vif */
95: u_int8_t mfcc_ttls[MAXVIFS]; /* forwarding ttls on vifs */
96:
97: /* extension fields */
98: u_int8_t mfcc_flags[MAXVIFS]; /* the MRT_MFC_FLAGS_* flags */
99: struct in_addr mfcc_rp; /* the RP address */
100: };
101: /*
102: * The advanced-API flags.
103: *
104: * The MRT_MFC_FLAGS_XXX API flags are also used as flags
105: * for the mfcc_flags field.
106: */
107: #define MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 << 0) /* disable WRONGVIF signals */
108: #define MRT_MFC_FLAGS_BORDER_VIF (1 << 1) /* border vif */
109: #define MRT_MFC_RP (1 << 8) /* enable RP address */
110: #define MRT_MFC_BW_UPCALL (1 << 9) /* enable bw upcalls */
111: #define MRT_MFC_FLAGS_ALL (MRT_MFC_FLAGS_DISABLE_WRONGVIF | \
112: MRT_MFC_FLAGS_BORDER_VIF)
113: #define MRT_API_FLAGS_ALL (MRT_MFC_FLAGS_ALL | \
114: MRT_MFC_RP | \
115: MRT_MFC_BW_UPCALL)
116:
117: /*
118: * Structure for installing or delivering an upcall if the
119: * measured bandwidth is above or below a threshold.
120: *
121: * User programs (e.g. daemons) may have a need to know when the
122: * bandwidth used by some data flow is above or below some threshold.
123: * This interface allows the userland to specify the threshold (in
124: * bytes and/or packets) and the measurement interval. Flows are
125: * all packet with the same source and destination IP address.
126: * At the moment the code is only used for multicast destinations
127: * but there is nothing that prevents its use for unicast.
128: *
129: * The measurement interval cannot be shorter than some Tmin (currently, 3s).
130: * The threshold is set in packets and/or bytes per_interval.
131: *
132: * Measurement works as follows:
133: *
134: * For >= measurements:
135: * The first packet marks the start of a measurement interval.
136: * During an interval we count packets and bytes, and when we
137: * pass the threshold we deliver an upcall and we are done.
138: * The first packet after the end of the interval resets the
139: * count and restarts the measurement.
140: *
141: * For <= measurement:
142: * We start a timer to fire at the end of the interval, and
143: * then for each incoming packet we count packets and bytes.
144: * When the timer fires, we compare the value with the threshold,
145: * schedule an upcall if we are below, and restart the measurement
146: * (reschedule timer and zero counters).
147: */
148:
149: struct bw_data {
150: struct timeval b_time;
151: u_int64_t b_packets;
152: u_int64_t b_bytes;
153: };
154:
155: struct bw_upcall {
156: struct in_addr bu_src; /* source address */
157: struct in_addr bu_dst; /* destination address */
158: u_int32_t bu_flags; /* misc flags (see below) */
159: #define BW_UPCALL_UNIT_PACKETS (1 << 0) /* threshold (in packets) */
160: #define BW_UPCALL_UNIT_BYTES (1 << 1) /* threshold (in bytes) */
161: #define BW_UPCALL_GEQ (1 << 2) /* upcall if bw >= threshold */
162: #define BW_UPCALL_LEQ (1 << 3) /* upcall if bw <= threshold */
163: #define BW_UPCALL_DELETE_ALL (1 << 4) /* delete all upcalls for s,d*/
164: struct bw_data bu_threshold; /* the bw threshold */
165: struct bw_data bu_measured; /* the measured bw */
166: };
167:
168: /* max. number of upcalls to deliver together */
169: #define BW_UPCALLS_MAX 128
170: /* min. threshold time interval for bandwidth measurement */
171: #define BW_UPCALL_THRESHOLD_INTERVAL_MIN_SEC 3
172: #define BW_UPCALL_THRESHOLD_INTERVAL_MIN_USEC 0
173:
174: /*
175: * Argument structure used by mrouted to get src-grp pkt counts.
176: */
177: struct sioc_sg_req {
178: struct in_addr src;
179: struct in_addr grp;
180: u_long pktcnt;
181: u_long bytecnt;
182: u_long wrong_if;
183: };
184:
185: /*
186: * Argument structure used by mrouted to get vif pkt counts.
187: */
188: struct sioc_vif_req {
189: vifi_t vifi; /* vif number */
190: u_long icount; /* input packet count on vif */
191: u_long ocount; /* output packet count on vif */
192: u_long ibytes; /* input byte count on vif */
193: u_long obytes; /* output byte count on vif */
194: };
195:
196:
197: /*
198: * The kernel's multicast routing statistics.
199: */
200: struct mrtstat {
201: u_long mrts_mfc_lookups; /* # forw. cache hash table hits */
202: u_long mrts_mfc_misses; /* # forw. cache hash table misses */
203: u_long mrts_upcalls; /* # calls to mrouted */
204: u_long mrts_no_route; /* no route for packet's origin */
205: u_long mrts_bad_tunnel; /* malformed tunnel options */
206: u_long mrts_cant_tunnel; /* no room for tunnel options */
207: u_long mrts_wrong_if; /* arrived on wrong interface */
208: u_long mrts_upq_ovflw; /* upcall Q overflow */
209: u_long mrts_cache_cleanups; /* # entries with no upcalls */
210: u_long mrts_drop_sel; /* pkts dropped selectively */
211: u_long mrts_q_overflow; /* pkts dropped - Q overflow */
212: u_long mrts_pkt2large; /* pkts dropped - size > BKT SIZE */
213: u_long mrts_upq_sockfull; /* upcalls dropped - socket full */
214: };
215:
216:
217: #ifdef _KERNEL
218:
219: /*
220: * The kernel's virtual-interface structure.
221: */
222: struct vif {
223: u_int8_t v_flags; /* VIFF_ flags defined above */
224: u_int8_t v_threshold; /* min ttl required to forward on vif */
225: struct in_addr v_lcl_addr; /* local interface address */
226: struct in_addr v_rmt_addr; /* remote address (tunnels only) */
227: struct ifnet *v_ifp; /* pointer to interface */
228: u_long v_pkt_in; /* # pkts in on interface */
229: u_long v_pkt_out; /* # pkts out on interface */
230: u_long v_bytes_in; /* # bytes in on interface */
231: u_long v_bytes_out; /* # bytes out on interface */
232: struct route v_route; /* cached route if this is a tunnel */
233: struct timeout v_repq_ch; /* for tbf_reprocess_q() */
234: #ifdef RSVP_ISI
235: int v_rsvp_on; /* # RSVP listening on this vif */
236: struct socket *v_rsvpd; /* # RSVPD daemon */
237: #endif /* RSVP_ISI */
238: };
239:
240: /*
241: * The kernel's multicast forwarding cache entry structure.
242: * (A field for the type of service (mfc_tos) is to be added
243: * at a future point.)
244: */
245: struct mfc {
246: LIST_ENTRY(mfc) mfc_hash;
247: struct in_addr mfc_origin; /* ip origin of mcasts */
248: struct in_addr mfc_mcastgrp; /* multicast group associated */
249: vifi_t mfc_parent; /* incoming vif */
250: u_int8_t mfc_ttls[MAXVIFS]; /* forwarding ttls on vifs */
251: u_long mfc_pkt_cnt; /* pkt count for src-grp */
252: u_long mfc_byte_cnt; /* byte count for src-grp */
253: u_long mfc_wrong_if; /* wrong if for src-grp */
254: int mfc_expire; /* time to clean entry up */
255: struct timeval mfc_last_assert; /* last time I sent an assert */
256: struct rtdetq *mfc_stall; /* pkts waiting for route */
257: u_int8_t mfc_flags[MAXVIFS]; /* the MRT_MFC_FLAGS_* flags */
258: struct in_addr mfc_rp; /* the RP address */
259: struct bw_meter *mfc_bw_meter; /* list of bandwidth meters */
260: };
261:
262: /*
263: * Structure used to communicate from kernel to multicast router.
264: * (Note the convenient similarity to an IP packet.)
265: */
266: struct igmpmsg {
267: u_int32_t unused1;
268: u_int32_t unused2;
269: u_int8_t im_msgtype; /* what type of message */
270: #define IGMPMSG_NOCACHE 1 /* no MFC in the kernel */
271: #define IGMPMSG_WRONGVIF 2 /* packet came from wrong interface */
272: #define IGMPMSG_WHOLEPKT 3 /* PIM pkt for user level encap. */
273: #define IGMPMSG_BW_UPCALL 4 /* BW monitoring upcall */
274: u_int8_t im_mbz; /* must be zero */
275: u_int8_t im_vif; /* vif rec'd on */
276: u_int8_t unused3;
277: struct in_addr im_src, im_dst;
278: };
279:
280: /*
281: * Argument structure used for pkt info. while upcall is made.
282: */
283: struct rtdetq {
284: struct mbuf *m; /* a copy of the packet */
285: struct ifnet *ifp; /* interface pkt came in on */
286: #ifdef UPCALL_TIMING
287: struct timeval t; /* timestamp */
288: #endif /* UPCALL_TIMING */
289: struct rtdetq *next;
290: };
291:
292: #define MFCTBLSIZ 256
293: #define MAX_UPQ 4 /* max. no of pkts in upcall Q */
294:
295: /*
296: * Structure for measuring the bandwidth and sending an upcall if the
297: * measured bandwidth is above or below a threshold.
298: */
299: struct bw_meter {
300: struct bw_meter *bm_mfc_next; /* next bw meter (same mfc) */
301: struct bw_meter *bm_time_next; /* next bw meter (same time) */
302: uint32_t bm_time_hash; /* the time hash value */
303: struct mfc *bm_mfc; /* the corresponding mfc */
304: uint32_t bm_flags; /* misc flags (see below) */
305: #define BW_METER_UNIT_PACKETS (1 << 0) /* threshold (in packets) */
306: #define BW_METER_UNIT_BYTES (1 << 1) /* threshold (in bytes) */
307: #define BW_METER_GEQ (1 << 2) /* upcall if bw >= threshold */
308: #define BW_METER_LEQ (1 << 3) /* upcall if bw <= threshold */
309: #define BW_METER_USER_FLAGS (BW_METER_UNIT_PACKETS | \
310: BW_METER_UNIT_BYTES | \
311: BW_METER_GEQ | \
312: BW_METER_LEQ)
313:
314: #define BW_METER_UPCALL_DELIVERED (1 << 24) /* upcall was delivered */
315:
316: struct bw_data bm_threshold; /* the upcall threshold */
317: struct bw_data bm_measured; /* the measured bw */
318: struct timeval bm_start_time; /* abs. time */
319: };
320:
321: int ip_mrouter_set(struct socket *, int, struct mbuf **);
322: int ip_mrouter_get(struct socket *, int, struct mbuf **);
323: int mrt_ioctl(struct socket *, u_long, caddr_t);
324: int ip_mrouter_done(void);
325: void ip_mrouter_detach(struct ifnet *);
326: void reset_vif(struct vif *);
327: void vif_delete(struct ifnet *);
328: #ifdef RSVP_ISI
329: int ip_mforward(struct mbuf *, struct ifnet *, struct ip_moptions *);
330: int legal_vif_num(int);
331: int ip_rsvp_vif_init(struct socket *, struct mbuf *);
332: int ip_rsvp_vif_done(struct socket *, struct mbuf *);
333: void ip_rsvp_force_done(struct socket *);
334: void rsvp_input(struct mbuf *, int, int);
335: #else
336: int ip_mforward(struct mbuf *, struct ifnet *);
337: #endif /* RSVP_ISI */
338:
339: #endif /* _KERNEL */
340: #endif /* _NETINET_IP_MROUTE_H_ */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>