--- embedaddon/quagga/Makefile.in	2012/02/21 17:26:11	1.1
+++ embedaddon/quagga/Makefile.in	2016/11/02 10:09:10	1.1.1.5
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,6 +15,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -41,7 +58,10 @@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/M
 	INSTALL NEWS TODO compile config.guess config.sub depcomp \
 	install-sh ltmain.sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_sys_weak_alias.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@@ -50,6 +70,12 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -59,6 +85,11 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
@@ -70,9 +101,11 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -101,9 +134,12 @@ am__relativize = \
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -114,11 +150,13 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CONFDATE = @CONFDATE@
+CONFIG_ARGS = @CONFIG_ARGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CURSES = @CURSES@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
+DEJAGNU = @DEJAGNU@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DOC = @DOC@
@@ -134,8 +172,6 @@ GAWK = @GAWK@
 GREP = @GREP@
 HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
 IF_METHOD = @IF_METHOD@
-IF_PROC = @IF_PROC@
-INCLUDES = @INCLUDES@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -148,6 +184,7 @@ ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
 ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
 ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
 KERNEL_METHOD = @KERNEL_METHOD@
+LATEXMK = @LATEXMK@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBCAP = @LIBCAP@
@@ -157,7 +194,6 @@ LIBPAM = @LIBPAM@
 LIBREADLINE = @LIBREADLINE@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
-LIB_IPV6 = @LIB_IPV6@
 LIB_REGEX = @LIB_REGEX@
 LIPO = @LIPO@
 LN_S = @LN_S@
@@ -165,7 +201,7 @@ LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
-MULTIPATH_NUM = @MULTIPATH_NUM@
+NETSNMP_CONFIG = @NETSNMP_CONFIG@
 NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
@@ -174,7 +210,6 @@ OSPF6D = @OSPF6D@
 OSPFAPI = @OSPFAPI@
 OSPFCLIENT = @OSPFCLIENT@
 OSPFD = @OSPFD@
-OTHER_METHOD = @OTHER_METHOD@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
@@ -185,23 +220,26 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
 PERL = @PERL@
-PICFLAGS = @PICFLAGS@
-PILDFLAGS = @PILDFLAGS@
+PIMD = @PIMD@
 RANLIB = @RANLIB@
 RIPD = @RIPD@
 RIPNGD = @RIPNGD@
 RTREAD_METHOD = @RTREAD_METHOD@
 RT_METHOD = @RT_METHOD@
+RUNTESTDEFAULTFLAGS = @RUNTESTDEFAULTFLAGS@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
-SNMP_INCLUDES = @SNMP_INCLUDES@
 SOLARIS = @SOLARIS@
 STRIP = @STRIP@
 VERSION = @VERSION@
 VTYSH = @VTYSH@
 WATCHQUAGGA = @WATCHQUAGGA@
+WEAK_ALIAS = @WEAK_ALIAS@
+WEAK_ALIAS_CROSSFILE = @WEAK_ALIAS_CROSSFILE@
+WERROR = @WERROR@
 ZEBRA = @ZEBRA@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
@@ -267,25 +305,26 @@ top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 SUBDIRS = lib @ZEBRA@ @BGPD@ @RIPD@ @RIPNGD@ @OSPFD@ @OSPF6D@ \
-         @ISISD@ @WATCHQUAGGA@ @VTYSH@ @OSPFCLIENT@ @DOC@ m4 @pkgsrcdir@ \
-         redhat @SOLARIS@
+         @ISISD@ @PIMD@ @WATCHQUAGGA@ @VTYSH@ @OSPFCLIENT@ @DOC@ m4 @pkgsrcdir@ \
+         redhat @SOLARIS@ tests
 
 DIST_SUBDIRS = lib zebra bgpd ripd ripngd ospfd ospf6d \
 	  isisd watchquagga vtysh ospfclient doc m4 pkgsrc redhat tests \
-	  solaris
+	  solaris pimd
 
 EXTRA_DIST = aclocal.m4 SERVICES TODO REPORTING-BUGS INSTALL.quagga.txt \
 	update-autotools \
 	vtysh/Makefile.in vtysh/Makefile.am \
-	tools/mrlg.cgi tools/rrcheck.pl tools/rrlookup.pl tools/zc.pl \
-	tools/zebra.el tools/multiple-bgpd.sh
+	tools/rrcheck.pl tools/rrlookup.pl tools/zc.pl \
+	tools/zebra.el tools/multiple-bgpd.sh \
+	fpm/fpm.h
 
 ACLOCAL_AMFLAGS = -I m4
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -321,10 +360,8 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -515,13 +552,10 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -553,15 +587,19 @@ dist-gzip: distdir
 	$(am__remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__remove_distdir)
+
 dist-lzma: distdir
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 
 dist-tarZ: distdir
@@ -592,6 +630,8 @@ distcheck: dist
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
@@ -601,7 +641,7 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	chmod -R a-w $(distdir); chmod u+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
@@ -611,6 +651,7 @@ distcheck: dist
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -639,8 +680,16 @@ distcheck: dist
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -671,10 +720,15 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -686,9 +740,10 @@ distclean-generic:
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
+@HAVE_LATEX_FALSE@clean-local:
 clean: clean-recursive
 
-clean-am: clean-generic clean-libtool mostlyclean-am
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
 
 distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
@@ -761,20 +816,27 @@ uninstall-am:
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
-	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
-	distcheck distclean distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+	clean-libtool clean-local ctags ctags-recursive dist dist-all \
+	dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
 
+
+@HAVE_LATEX_TRUE@HACKING.pdf: HACKING.tex
+@HAVE_LATEX_TRUE@	$(LATEXMK) -pdf $<
+
+@HAVE_LATEX_TRUE@clean-local:
+@HAVE_LATEX_TRUE@	-$(LATEXMK) -C HACKING.tex
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.