--- embedaddon/quagga/doc/Makefile.in	2012/05/29 11:53:41	1.1.1.2
+++ embedaddon/quagga/doc/Makefile.in	2012/10/09 09:22:28	1.1.1.3
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.2 from Makefile.am.
+# Makefile.in generated by automake 1.11.5 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -15,6 +15,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -34,6 +51,16 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
+@BGPD_TRUE@am__append_1 = bgpd.8
+@ISISD_TRUE@am__append_2 = isisd.8
+@OSPF6D_TRUE@am__append_3 = ospf6d.8
+@OSPFCLIENT_TRUE@am__append_4 = ospfclient.8
+@OSPFD_TRUE@am__append_5 = ospfd.8
+@RIPD_TRUE@am__append_6 = ripd.8
+@RIPNGD_TRUE@am__append_7 = ripngd.8
+@VTYSH_TRUE@am__append_8 = vtysh.1
+@WATCHQUAGGA_TRUE@am__append_9 = watchquagga.8
+@ZEBRA_TRUE@am__append_10 = zebra.8
 subdir = doc
 DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
@@ -64,6 +91,11 @@ TEXI2PDF = $(TEXI2DVI) --pdf --batch
 MAKEINFOHTML = $(MAKEINFO) --html
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 DVIPS = dvips
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
 	"$(DESTDIR)$(man8dir)"
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -105,6 +137,7 @@ AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+BABELD = @BABELD@
 BGPD = @BGPD@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
@@ -144,6 +177,7 @@ ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
 ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
 ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
 KERNEL_METHOD = @KERNEL_METHOD@
+LATEXMK = @LATEXMK@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBCAP = @LIBCAP@
@@ -181,6 +215,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
 PERL = @PERL@
 PICFLAGS = @PICFLAGS@
 PILDFLAGS = @PILDFLAGS@
@@ -301,14 +336,19 @@ figures_txt = $(figures_names_parts:%=fig%.txt)
 # Built from defines.texi.in
 BUILT_SOURCES = defines.texi
 info_TEXINFOS = quagga.texi
-quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi install.texi \
-	ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi overview.texi \
-	protocol.texi ripd.texi ripngd.texi routemap.texi snmp.texi \
-	vtysh.texi routeserver.texi defines.texi $(figures_png) snmptrap.texi \
-	$(figures_txt)
+quagga_TEXINFOS = appendix.texi babeld.texi basic.texi bgpd.texi filter.texi \
+	install.texi ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi \
+	overview.texi protocol.texi ripd.texi ripngd.texi routemap.texi \
+	snmp.texi vtysh.texi routeserver.texi defines.texi $(figures_png) \
+	snmptrap.texi $(figures_txt)
 
-man_MANS = vtysh.1 bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8 isisd.8
-EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt $(man_MANS) \
+man_MANS = $(am__append_1) $(am__append_2) $(am__append_3) \
+	$(am__append_4) $(am__append_5) $(am__append_6) \
+	$(am__append_7) $(am__append_8) $(am__append_9) \
+	$(am__append_10)
+EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt \
+	bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ripd.8 \
+	ripngd.8 vtysh.1 watchquagga.8 zebra.8 \
 	mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
 	mpls/opaque_lsa.txt mpls/ospfd.conf \
 	$(figures_sources) $(figures_png) $(figures_txt)
@@ -448,9 +488,7 @@ uninstall-html-am:
 
 uninstall-info-am:
 	@$(PRE_UNINSTALL)
-	@if test -d '$(DESTDIR)$(infodir)' && \
-	    (install-info --version && \
-	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
 	  list='$(INFO_DEPS)'; \
 	  for file in $$list; do \
 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
@@ -523,11 +561,18 @@ maintainer-clean-aminfo:
 	done
 install-man1: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -559,11 +604,18 @@ uninstall-man1:
 	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 install-man8: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -712,8 +764,11 @@ install-dvi: install-dvi-am
 
 install-dvi-am: $(DVIS)
 	@$(NORMAL_INSTALL)
-	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -728,8 +783,11 @@ install-html: install-html-am
 
 install-html-am: $(HTMLS)
 	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  $(am__strip_dir) \
@@ -752,9 +810,12 @@ install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
 	@$(NORMAL_INSTALL)
-	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+	fi; \
 	for file in $$list; do \
 	  case $$file in \
 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
@@ -772,13 +833,7 @@ install-info-am: $(INFO_DEPS)
 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 	@$(POST_INSTALL)
-	@am__run_installinfo=yes; \
-	case $$AM_UPDATE_INFO_DIR in \
-	  n|no|NO) am__run_installinfo=no;; \
-	  *) (install-info --version) >/dev/null 2>&1 \
-	       || am__run_installinfo=no;; \
-	esac; \
-	if test $$am__run_installinfo = yes; then \
+	@if $(am__can_run_installinfo); then \
 	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 	  for file in $$list; do \
 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
@@ -792,8 +847,11 @@ install-pdf: install-pdf-am
 
 install-pdf-am: $(PDFS)
 	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -805,8 +863,11 @@ install-ps: install-ps-am
 
 install-ps-am: $(PSS)
 	@$(NORMAL_INSTALL)
-	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \