Annotation of embedaddon/quagga/doc/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
! 6: # Inc.
! 7: # This Makefile.in is free software; the Free Software Foundation
! 8: # gives unlimited permission to copy and/or distribute it,
! 9: # with or without modifications, as long as this notice is preserved.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 14: # PARTICULAR PURPOSE.
! 15:
! 16: @SET_MAKE@
! 17: VPATH = @srcdir@
! 18: pkgdatadir = $(datadir)/@PACKAGE@
! 19: pkgincludedir = $(includedir)/@PACKAGE@
! 20: pkglibdir = $(libdir)/@PACKAGE@
! 21: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 23: install_sh_DATA = $(install_sh) -c -m 644
! 24: install_sh_PROGRAM = $(install_sh) -c
! 25: install_sh_SCRIPT = $(install_sh) -c
! 26: INSTALL_HEADER = $(INSTALL_DATA)
! 27: transform = $(program_transform_name)
! 28: NORMAL_INSTALL = :
! 29: PRE_INSTALL = :
! 30: POST_INSTALL = :
! 31: NORMAL_UNINSTALL = :
! 32: PRE_UNINSTALL = :
! 33: POST_UNINSTALL = :
! 34: build_triplet = @build@
! 35: host_triplet = @host@
! 36: target_triplet = @target@
! 37: subdir = doc
! 38: DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
! 39: $(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
! 40: $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
! 41: texinfo.tex
! 42: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 43: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
! 44: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 45: $(ACLOCAL_M4)
! 46: mkinstalldirs = $(install_sh) -d
! 47: CONFIG_HEADER = $(top_builddir)/config.h
! 48: CONFIG_CLEAN_FILES = defines.texi
! 49: CONFIG_CLEAN_VPATH_FILES =
! 50: SOURCES =
! 51: DIST_SOURCES =
! 52: INFO_DEPS = $(srcdir)/quagga.info
! 53: am__TEXINFO_TEX_DIR = $(srcdir)
! 54: DVIS = quagga.dvi
! 55: PDFS = quagga.pdf
! 56: PSS = quagga.ps
! 57: HTMLS = quagga.html
! 58: TEXINFOS = quagga.texi
! 59: TEXI2DVI = texi2dvi
! 60: TEXI2PDF = $(TEXI2DVI) --pdf --batch
! 61: MAKEINFOHTML = $(MAKEINFO) --html
! 62: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
! 63: DVIPS = dvips
! 64: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
! 65: "$(DESTDIR)$(man8dir)"
! 66: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 67: am__vpath_adj = case $$p in \
! 68: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 69: *) f=$$p;; \
! 70: esac;
! 71: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 72: am__install_max = 40
! 73: am__nobase_strip_setup = \
! 74: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 75: am__nobase_strip = \
! 76: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 77: am__nobase_list = $(am__nobase_strip_setup); \
! 78: for p in $$list; do echo "$$p $$p"; done | \
! 79: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 80: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 81: if (++n[$$2] == $(am__install_max)) \
! 82: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 83: END { for (dir in files) print dir, files[dir] }'
! 84: am__base_list = \
! 85: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 86: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 87: man1dir = $(mandir)/man1
! 88: man8dir = $(mandir)/man8
! 89: NROFF = nroff
! 90: MANS = $(man_MANS)
! 91: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 92: ACLOCAL = @ACLOCAL@
! 93: AMTAR = @AMTAR@
! 94: AR = @AR@
! 95: AUTOCONF = @AUTOCONF@
! 96: AUTOHEADER = @AUTOHEADER@
! 97: AUTOMAKE = @AUTOMAKE@
! 98: AWK = @AWK@
! 99: BGPD = @BGPD@
! 100: CC = @CC@
! 101: CCDEPMODE = @CCDEPMODE@
! 102: CFLAGS = @CFLAGS@
! 103: CONFDATE = @CONFDATE@
! 104: CPP = @CPP@
! 105: CPPFLAGS = @CPPFLAGS@
! 106: CURSES = @CURSES@
! 107: CYGPATH_W = @CYGPATH_W@
! 108: DEFS = @DEFS@
! 109: DEPDIR = @DEPDIR@
! 110: DLLTOOL = @DLLTOOL@
! 111: DOC = @DOC@
! 112: DSYMUTIL = @DSYMUTIL@
! 113: DUMPBIN = @DUMPBIN@
! 114: ECHO_C = @ECHO_C@
! 115: ECHO_N = @ECHO_N@
! 116: ECHO_T = @ECHO_T@
! 117: EGREP = @EGREP@
! 118: EXEEXT = @EXEEXT@
! 119: FGREP = @FGREP@
! 120: GAWK = @GAWK@
! 121: GREP = @GREP@
! 122: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
! 123: IF_METHOD = @IF_METHOD@
! 124: IF_PROC = @IF_PROC@
! 125: INCLUDES = @INCLUDES@
! 126: INSTALL = @INSTALL@
! 127: INSTALL_DATA = @INSTALL_DATA@
! 128: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 129: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 130: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 131: IOCTL_METHOD = @IOCTL_METHOD@
! 132: IPFORWARD = @IPFORWARD@
! 133: ISISD = @ISISD@
! 134: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
! 135: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
! 136: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
! 137: KERNEL_METHOD = @KERNEL_METHOD@
! 138: LD = @LD@
! 139: LDFLAGS = @LDFLAGS@
! 140: LIBCAP = @LIBCAP@
! 141: LIBM = @LIBM@
! 142: LIBOBJS = @LIBOBJS@
! 143: LIBPAM = @LIBPAM@
! 144: LIBREADLINE = @LIBREADLINE@
! 145: LIBS = @LIBS@
! 146: LIBTOOL = @LIBTOOL@
! 147: LIB_IPV6 = @LIB_IPV6@
! 148: LIB_REGEX = @LIB_REGEX@
! 149: LIPO = @LIPO@
! 150: LN_S = @LN_S@
! 151: LTLIBOBJS = @LTLIBOBJS@
! 152: MAKEINFO = @MAKEINFO@
! 153: MANIFEST_TOOL = @MANIFEST_TOOL@
! 154: MKDIR_P = @MKDIR_P@
! 155: MULTIPATH_NUM = @MULTIPATH_NUM@
! 156: NM = @NM@
! 157: NMEDIT = @NMEDIT@
! 158: OBJDUMP = @OBJDUMP@
! 159: OBJEXT = @OBJEXT@
! 160: OSPF6D = @OSPF6D@
! 161: OSPFAPI = @OSPFAPI@
! 162: OSPFCLIENT = @OSPFCLIENT@
! 163: OSPFD = @OSPFD@
! 164: OTHER_METHOD = @OTHER_METHOD@
! 165: OTOOL = @OTOOL@
! 166: OTOOL64 = @OTOOL64@
! 167: PACKAGE = @PACKAGE@
! 168: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 169: PACKAGE_NAME = @PACKAGE_NAME@
! 170: PACKAGE_STRING = @PACKAGE_STRING@
! 171: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 172: PACKAGE_URL = @PACKAGE_URL@
! 173: PACKAGE_VERSION = @PACKAGE_VERSION@
! 174: PATH_SEPARATOR = @PATH_SEPARATOR@
! 175: PERL = @PERL@
! 176: PICFLAGS = @PICFLAGS@
! 177: PILDFLAGS = @PILDFLAGS@
! 178: RANLIB = @RANLIB@
! 179: RIPD = @RIPD@
! 180: RIPNGD = @RIPNGD@
! 181: RTREAD_METHOD = @RTREAD_METHOD@
! 182: RT_METHOD = @RT_METHOD@
! 183: SED = @SED@
! 184: SET_MAKE = @SET_MAKE@
! 185: SHELL = @SHELL@
! 186: SNMP_INCLUDES = @SNMP_INCLUDES@
! 187: SOLARIS = @SOLARIS@
! 188: STRIP = @STRIP@
! 189: VERSION = @VERSION@
! 190: VTYSH = @VTYSH@
! 191: WATCHQUAGGA = @WATCHQUAGGA@
! 192: ZEBRA = @ZEBRA@
! 193: abs_builddir = @abs_builddir@
! 194: abs_srcdir = @abs_srcdir@
! 195: abs_top_builddir = @abs_top_builddir@
! 196: abs_top_srcdir = @abs_top_srcdir@
! 197: ac_ct_AR = @ac_ct_AR@
! 198: ac_ct_CC = @ac_ct_CC@
! 199: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 200: am__include = @am__include@
! 201: am__leading_dot = @am__leading_dot@
! 202: am__quote = @am__quote@
! 203: am__tar = @am__tar@
! 204: am__untar = @am__untar@
! 205: bindir = @bindir@
! 206: build = @build@
! 207: build_alias = @build_alias@
! 208: build_cpu = @build_cpu@
! 209: build_os = @build_os@
! 210: build_vendor = @build_vendor@
! 211: builddir = @builddir@
! 212: datadir = @datadir@
! 213: datarootdir = @datarootdir@
! 214: docdir = @docdir@
! 215: dvidir = @dvidir@
! 216: enable_group = @enable_group@
! 217: enable_user = @enable_user@
! 218: enable_vty_group = @enable_vty_group@
! 219: exampledir = @exampledir@
! 220: exec_prefix = @exec_prefix@
! 221: host = @host@
! 222: host_alias = @host_alias@
! 223: host_cpu = @host_cpu@
! 224: host_os = @host_os@
! 225: host_vendor = @host_vendor@
! 226: htmldir = @htmldir@
! 227: includedir = @includedir@
! 228: infodir = @infodir@
! 229: install_sh = @install_sh@
! 230: libdir = @libdir@
! 231: libexecdir = @libexecdir@
! 232: localedir = @localedir@
! 233: localstatedir = @localstatedir@
! 234: mandir = @mandir@
! 235: mkdir_p = @mkdir_p@
! 236: oldincludedir = @oldincludedir@
! 237: pdfdir = @pdfdir@
! 238: pkgsrcdir = @pkgsrcdir@
! 239: pkgsrcrcdir = @pkgsrcrcdir@
! 240: prefix = @prefix@
! 241: program_transform_name = @program_transform_name@
! 242: psdir = @psdir@
! 243: quagga_statedir = @quagga_statedir@
! 244: sbindir = @sbindir@
! 245: sharedstatedir = @sharedstatedir@
! 246: srcdir = @srcdir@
! 247: sysconfdir = @sysconfdir@
! 248: target = @target@
! 249: target_alias = @target_alias@
! 250: target_cpu = @target_cpu@
! 251: target_os = @target_os@
! 252: target_vendor = @target_vendor@
! 253: top_build_prefix = @top_build_prefix@
! 254: top_builddir = @top_builddir@
! 255: top_srcdir = @top_srcdir@
! 256:
! 257: # Dia, the version i have at least, doesn't do very good EPS output
! 258: # (some of the text is scaled strangely). So this will work, but
! 259: # it is probably better to use something like gimp to convert the
! 260: # dia exported PNG files to EPS manually.
! 261: #
! 262: # Here we use 'convert' from the well known 'ImageMagick' package
! 263: # to do conversion from png to eps/pdf for figures.
! 264: # PDF form is required for quagga.pdf, using PDFTex at least.
! 265: #
! 266: # TeX implementation, which we depend on already anyway.
! 267: #
! 268: # dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
! 269: SUFFIXES = .png .eps .dia .pdf
! 270: DIATOPNG = dia -t png -e
! 271: DIATOEPS = dia -t eps -e
! 272: PNGTOEPS = convert -antialias -contrast -despeckle
! 273: PNGTOPDF = $(PNGTOEPS)
! 274: EPSTOPDF = epstopdf
! 275:
! 276: # The figure sources
! 277: figures_names_parts = -normal-processing -rs-processing \
! 278: _topologies_full _topologies_rs
! 279:
! 280: figures_sources = $(figures_names_parts:%=fig%.dia)
! 281: figures_png = $(figures_names_parts:%=fig%.png)
! 282: figures_pdf = $(figures_names_parts:%=fig%.pdf)
! 283: figures_eps = $(figures_names_parts:%=fig%.eps)
! 284: figures_txt = $(figures_names_parts:%=fig%.txt)
! 285:
! 286: # rather twisted logic because we have to build PDFs of the EPS figures for
! 287: # PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
! 288: # cant rely on a single automatic rule for *.pdf, eg the one automatically
! 289: # provided by automake. If you are an automake wizard, please feel free to
! 290: # compact it somehow.
! 291:
! 292: # Built from defines.texi.in
! 293: BUILT_SOURCES = defines.texi
! 294: info_TEXINFOS = quagga.texi
! 295: quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi install.texi \
! 296: ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi overview.texi \
! 297: protocol.texi ripd.texi ripngd.texi routemap.texi snmp.texi \
! 298: vtysh.texi routeserver.texi defines.texi $(figures_png) snmptrap.texi \
! 299: $(figures_txt)
! 300:
! 301: man_MANS = vtysh.1 bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8 isisd.8
! 302: EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt $(man_MANS) \
! 303: mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
! 304: mpls/opaque_lsa.txt mpls/ospfd.conf \
! 305: $(figures_sources) $(figures_png) $(figures_txt)
! 306:
! 307: all: $(BUILT_SOURCES)
! 308: $(MAKE) $(AM_MAKEFLAGS) all-am
! 309:
! 310: .SUFFIXES:
! 311: .SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
! 312: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 313: @for dep in $?; do \
! 314: case '$(am__configure_deps)' in \
! 315: *$$dep*) \
! 316: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 317: && { if test -f $@; then exit 0; else break; fi; }; \
! 318: exit 1;; \
! 319: esac; \
! 320: done; \
! 321: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
! 322: $(am__cd) $(top_srcdir) && \
! 323: $(AUTOMAKE) --gnu doc/Makefile
! 324: .PRECIOUS: Makefile
! 325: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 326: @case '$?' in \
! 327: *config.status*) \
! 328: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 329: *) \
! 330: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 331: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 332: esac;
! 333:
! 334: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 335: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 336:
! 337: $(top_srcdir)/configure: $(am__configure_deps)
! 338: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 339: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 340: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 341: $(am__aclocal_m4_deps):
! 342: defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
! 343: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 344:
! 345: mostlyclean-libtool:
! 346: -rm -f *.lo
! 347:
! 348: clean-libtool:
! 349: -rm -rf .libs _libs
! 350:
! 351: .texi.info:
! 352: restore=: && backupdir="$(am__leading_dot)am$$$$" && \
! 353: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
! 354: rm -rf $$backupdir && mkdir $$backupdir && \
! 355: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
! 356: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
! 357: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
! 358: done; \
! 359: else :; fi && \
! 360: cd "$$am__cwd"; \
! 361: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
! 362: -o $@ $<; \
! 363: then \
! 364: rc=0; \
! 365: $(am__cd) $(srcdir); \
! 366: else \
! 367: rc=$$?; \
! 368: $(am__cd) $(srcdir) && \
! 369: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
! 370: fi; \
! 371: rm -rf $$backupdir; exit $$rc
! 372:
! 373: .texi.dvi:
! 374: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
! 375: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
! 376: $(TEXI2DVI) $<
! 377:
! 378: .texi.pdf:
! 379: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
! 380: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
! 381: $(TEXI2PDF) $<
! 382:
! 383: .texi.html:
! 384: rm -rf $(@:.html=.htp)
! 385: if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
! 386: -o $(@:.html=.htp) $<; \
! 387: then \
! 388: rm -rf $@; \
! 389: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
! 390: mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
! 391: else \
! 392: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
! 393: rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
! 394: exit 1; \
! 395: fi
! 396: $(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
! 397: quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
! 398: quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
! 399: $(srcdir)/version.texi: $(srcdir)/stamp-vti
! 400: $(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
! 401: @(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
! 402: set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
! 403: echo "@set UPDATED $$1 $$2 $$3"; \
! 404: echo "@set UPDATED-MONTH $$2 $$3"; \
! 405: echo "@set EDITION $(VERSION)"; \
! 406: echo "@set VERSION $(VERSION)") > vti.tmp
! 407: @cmp -s vti.tmp $(srcdir)/version.texi \
! 408: || (echo "Updating $(srcdir)/version.texi"; \
! 409: cp vti.tmp $(srcdir)/version.texi)
! 410: -@rm -f vti.tmp
! 411: @cp $(srcdir)/version.texi $@
! 412:
! 413: mostlyclean-vti:
! 414: -rm -f vti.tmp
! 415:
! 416: maintainer-clean-vti:
! 417: -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
! 418: .dvi.ps:
! 419: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
! 420: $(DVIPS) -o $@ $<
! 421:
! 422: uninstall-dvi-am:
! 423: @$(NORMAL_UNINSTALL)
! 424: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
! 425: for p in $$list; do \
! 426: $(am__strip_dir) \
! 427: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
! 428: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
! 429: done
! 430:
! 431: uninstall-html-am:
! 432: @$(NORMAL_UNINSTALL)
! 433: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
! 434: for p in $$list; do \
! 435: $(am__strip_dir) \
! 436: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
! 437: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
! 438: done
! 439:
! 440: uninstall-info-am:
! 441: @$(PRE_UNINSTALL)
! 442: @if test -d '$(DESTDIR)$(infodir)' && \
! 443: (install-info --version && \
! 444: install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
! 445: list='$(INFO_DEPS)'; \
! 446: for file in $$list; do \
! 447: relfile=`echo "$$file" | sed 's|^.*/||'`; \
! 448: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
! 449: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
! 450: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
! 451: done; \
! 452: else :; fi
! 453: @$(NORMAL_UNINSTALL)
! 454: @list='$(INFO_DEPS)'; \
! 455: for file in $$list; do \
! 456: relfile=`echo "$$file" | sed 's|^.*/||'`; \
! 457: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
! 458: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
! 459: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
! 460: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
! 461: else :; fi); \
! 462: done
! 463:
! 464: uninstall-pdf-am:
! 465: @$(NORMAL_UNINSTALL)
! 466: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
! 467: for p in $$list; do \
! 468: $(am__strip_dir) \
! 469: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
! 470: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
! 471: done
! 472:
! 473: uninstall-ps-am:
! 474: @$(NORMAL_UNINSTALL)
! 475: @list='$(PSS)'; test -n "$(psdir)" || list=; \
! 476: for p in $$list; do \
! 477: $(am__strip_dir) \
! 478: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
! 479: rm -f "$(DESTDIR)$(psdir)/$$f"; \
! 480: done
! 481:
! 482: dist-info: $(INFO_DEPS)
! 483: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
! 484: list='$(INFO_DEPS)'; \
! 485: for base in $$list; do \
! 486: case $$base in \
! 487: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
! 488: esac; \
! 489: if test -f $$base; then d=.; else d=$(srcdir); fi; \
! 490: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
! 491: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
! 492: if test -f $$file; then \
! 493: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
! 494: test -f "$(distdir)/$$relfile" || \
! 495: cp -p $$file "$(distdir)/$$relfile"; \
! 496: else :; fi; \
! 497: done; \
! 498: done
! 499:
! 500: mostlyclean-aminfo:
! 501: -rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
! 502: quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
! 503: quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
! 504:
! 505: clean-aminfo:
! 506: -test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
! 507: || rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
! 508:
! 509: maintainer-clean-aminfo:
! 510: @list='$(INFO_DEPS)'; for i in $$list; do \
! 511: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
! 512: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
! 513: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
! 514: done
! 515: install-man1: $(man_MANS)
! 516: @$(NORMAL_INSTALL)
! 517: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
! 518: @list=''; test -n "$(man1dir)" || exit 0; \
! 519: { for i in $$list; do echo "$$i"; done; \
! 520: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
! 521: sed -n '/\.1[a-z]*$$/p'; \
! 522: } | while read p; do \
! 523: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 524: echo "$$d$$p"; echo "$$p"; \
! 525: done | \
! 526: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
! 527: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
! 528: sed 'N;N;s,\n, ,g' | { \
! 529: list=; while read file base inst; do \
! 530: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
! 531: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
! 532: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
! 533: fi; \
! 534: done; \
! 535: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
! 536: while read files; do \
! 537: test -z "$$files" || { \
! 538: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
! 539: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
! 540: done; }
! 541:
! 542: uninstall-man1:
! 543: @$(NORMAL_UNINSTALL)
! 544: @list=''; test -n "$(man1dir)" || exit 0; \
! 545: files=`{ for i in $$list; do echo "$$i"; done; \
! 546: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
! 547: sed -n '/\.1[a-z]*$$/p'; \
! 548: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
! 549: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
! 550: test -z "$$files" || { \
! 551: echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
! 552: cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
! 553: install-man8: $(man_MANS)
! 554: @$(NORMAL_INSTALL)
! 555: test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
! 556: @list=''; test -n "$(man8dir)" || exit 0; \
! 557: { for i in $$list; do echo "$$i"; done; \
! 558: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
! 559: sed -n '/\.8[a-z]*$$/p'; \
! 560: } | while read p; do \
! 561: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 562: echo "$$d$$p"; echo "$$p"; \
! 563: done | \
! 564: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
! 565: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
! 566: sed 'N;N;s,\n, ,g' | { \
! 567: list=; while read file base inst; do \
! 568: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
! 569: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
! 570: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
! 571: fi; \
! 572: done; \
! 573: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
! 574: while read files; do \
! 575: test -z "$$files" || { \
! 576: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
! 577: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
! 578: done; }
! 579:
! 580: uninstall-man8:
! 581: @$(NORMAL_UNINSTALL)
! 582: @list=''; test -n "$(man8dir)" || exit 0; \
! 583: files=`{ for i in $$list; do echo "$$i"; done; \
! 584: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
! 585: sed -n '/\.8[a-z]*$$/p'; \
! 586: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
! 587: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
! 588: test -z "$$files" || { \
! 589: echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
! 590: cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
! 591: tags: TAGS
! 592: TAGS:
! 593:
! 594: ctags: CTAGS
! 595: CTAGS:
! 596:
! 597:
! 598: distdir: $(DISTFILES)
! 599: @list='$(MANS)'; if test -n "$$list"; then \
! 600: list=`for p in $$list; do \
! 601: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 602: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
! 603: if test -n "$$list" && \
! 604: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
! 605: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
! 606: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
! 607: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
! 608: echo " typically \`make maintainer-clean' will remove them" >&2; \
! 609: exit 1; \
! 610: else :; fi; \
! 611: else :; fi
! 612: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 613: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 614: list='$(DISTFILES)'; \
! 615: dist_files=`for file in $$list; do echo $$file; done | \
! 616: sed -e "s|^$$srcdirstrip/||;t" \
! 617: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 618: case $$dist_files in \
! 619: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 620: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 621: sort -u` ;; \
! 622: esac; \
! 623: for file in $$dist_files; do \
! 624: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 625: if test -d $$d/$$file; then \
! 626: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 627: if test -d "$(distdir)/$$file"; then \
! 628: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 629: fi; \
! 630: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 631: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 632: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 633: fi; \
! 634: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 635: else \
! 636: test -f "$(distdir)/$$file" \
! 637: || cp -p $$d/$$file "$(distdir)/$$file" \
! 638: || exit 1; \
! 639: fi; \
! 640: done
! 641: $(MAKE) $(AM_MAKEFLAGS) \
! 642: top_distdir="$(top_distdir)" distdir="$(distdir)" \
! 643: dist-info
! 644: check-am: all-am
! 645: check: $(BUILT_SOURCES)
! 646: $(MAKE) $(AM_MAKEFLAGS) check-am
! 647: all-am: Makefile $(INFO_DEPS) $(MANS)
! 648: installdirs:
! 649: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
! 650: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 651: done
! 652: install: $(BUILT_SOURCES)
! 653: $(MAKE) $(AM_MAKEFLAGS) install-am
! 654: install-exec: install-exec-am
! 655: install-data: install-data-am
! 656: uninstall: uninstall-am
! 657:
! 658: install-am: all-am
! 659: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 660:
! 661: installcheck: installcheck-am
! 662: install-strip:
! 663: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 664: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 665: `test -z '$(STRIP)' || \
! 666: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 667: mostlyclean-generic:
! 668:
! 669: clean-generic:
! 670:
! 671: distclean-generic:
! 672: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 673: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 674:
! 675: maintainer-clean-generic:
! 676: @echo "This command is intended for maintainers to use"
! 677: @echo "it deletes files that may require special tools to rebuild."
! 678: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
! 679: clean: clean-am
! 680:
! 681: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
! 682:
! 683: distclean: distclean-am
! 684: -rm -f Makefile
! 685: distclean-am: clean-am distclean-generic
! 686:
! 687: dvi: dvi-am
! 688:
! 689: dvi-am: $(DVIS)
! 690:
! 691: html: html-am
! 692:
! 693: html-am: $(HTMLS)
! 694:
! 695: info: info-am
! 696:
! 697: info-am: $(INFO_DEPS)
! 698:
! 699: install-data-am: install-info-am install-man
! 700:
! 701: install-dvi: install-dvi-am
! 702:
! 703: install-dvi-am: $(DVIS)
! 704: @$(NORMAL_INSTALL)
! 705: test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
! 706: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
! 707: for p in $$list; do \
! 708: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 709: echo "$$d$$p"; \
! 710: done | $(am__base_list) | \
! 711: while read files; do \
! 712: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
! 713: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
! 714: done
! 715: install-exec-am:
! 716:
! 717: install-html: install-html-am
! 718:
! 719: install-html-am: $(HTMLS)
! 720: @$(NORMAL_INSTALL)
! 721: test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
! 722: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
! 723: for p in $$list; do \
! 724: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 725: $(am__strip_dir) \
! 726: if test -d "$$d$$p"; then \
! 727: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
! 728: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
! 729: echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
! 730: $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
! 731: else \
! 732: list2="$$list2 $$d$$p"; \
! 733: fi; \
! 734: done; \
! 735: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
! 736: while read files; do \
! 737: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
! 738: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
! 739: done; }
! 740: install-info: install-info-am
! 741:
! 742: install-info-am: $(INFO_DEPS)
! 743: @$(NORMAL_INSTALL)
! 744: test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
! 745: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
! 746: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
! 747: for file in $$list; do \
! 748: case $$file in \
! 749: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
! 750: esac; \
! 751: if test -f $$file; then d=.; else d=$(srcdir); fi; \
! 752: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
! 753: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
! 754: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
! 755: if test -f $$ifile; then \
! 756: echo "$$ifile"; \
! 757: else : ; fi; \
! 758: done; \
! 759: done | $(am__base_list) | \
! 760: while read files; do \
! 761: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
! 762: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
! 763: @$(POST_INSTALL)
! 764: @if (install-info --version && \
! 765: install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
! 766: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
! 767: for file in $$list; do \
! 768: relfile=`echo "$$file" | sed 's|^.*/||'`; \
! 769: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
! 770: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
! 771: done; \
! 772: else : ; fi
! 773: install-man: install-man1 install-man8
! 774:
! 775: install-pdf: install-pdf-am
! 776:
! 777: install-pdf-am: $(PDFS)
! 778: @$(NORMAL_INSTALL)
! 779: test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
! 780: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
! 781: for p in $$list; do \
! 782: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 783: echo "$$d$$p"; \
! 784: done | $(am__base_list) | \
! 785: while read files; do \
! 786: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
! 787: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
! 788: install-ps: install-ps-am
! 789:
! 790: install-ps-am: $(PSS)
! 791: @$(NORMAL_INSTALL)
! 792: test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
! 793: @list='$(PSS)'; test -n "$(psdir)" || list=; \
! 794: for p in $$list; do \
! 795: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 796: echo "$$d$$p"; \
! 797: done | $(am__base_list) | \
! 798: while read files; do \
! 799: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
! 800: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
! 801: installcheck-am:
! 802:
! 803: maintainer-clean: maintainer-clean-am
! 804: -rm -f Makefile
! 805: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
! 806: maintainer-clean-generic maintainer-clean-vti
! 807:
! 808: mostlyclean: mostlyclean-am
! 809:
! 810: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
! 811: mostlyclean-libtool mostlyclean-vti
! 812:
! 813: pdf: pdf-am
! 814:
! 815: pdf-am: $(PDFS)
! 816:
! 817: ps: ps-am
! 818:
! 819: ps-am: $(PSS)
! 820:
! 821: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
! 822: uninstall-man uninstall-pdf-am uninstall-ps-am
! 823:
! 824: uninstall-man: uninstall-man1 uninstall-man8
! 825:
! 826: .MAKE: all check install install-am install-strip
! 827:
! 828: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
! 829: clean-libtool dist-info distclean distclean-generic \
! 830: distclean-libtool distdir dvi dvi-am html html-am info info-am \
! 831: install install-am install-data install-data-am install-dvi \
! 832: install-dvi-am install-exec install-exec-am install-html \
! 833: install-html-am install-info install-info-am install-man \
! 834: install-man1 install-man8 install-pdf install-pdf-am \
! 835: install-ps install-ps-am install-strip installcheck \
! 836: installcheck-am installdirs maintainer-clean \
! 837: maintainer-clean-aminfo maintainer-clean-generic \
! 838: maintainer-clean-vti mostlyclean mostlyclean-aminfo \
! 839: mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
! 840: pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
! 841: uninstall-html-am uninstall-info-am uninstall-man \
! 842: uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
! 843:
! 844:
! 845: # Have to manually specify the quagga.pdf rule in order to allow
! 846: # us to have a generic automatic .pdf rule to build the figure sources
! 847: # because it cant just work from the png's directly it seems - contrary
! 848: # to the documentation...
! 849: quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
! 850: $(TEXI2PDF) -o "$@" $<
! 851:
! 852: .png.eps:
! 853: $(PNGTOEPS) $< "$@"
! 854:
! 855: .png.pdf:
! 856: $(PNGTOPDF) $< "$@"
! 857:
! 858: .dia.png:
! 859: $(DIATOPNG) "$@" $<
! 860:
! 861: draft-zebra-00.txt: draft-zebra-00.ms
! 862: groff -T ascii -ms $< > $@
! 863:
! 864: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 865: # Otherwise a system limit (for SysV at least) may be exceeded.
! 866: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc