Annotation of embedaddon/quagga/doc/Makefile.in, revision 1.1.1.1
1.1 misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: target_triplet = @target@
37: subdir = doc
38: DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
39: $(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
40: $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
41: texinfo.tex
42: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
43: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
44: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
45: $(ACLOCAL_M4)
46: mkinstalldirs = $(install_sh) -d
47: CONFIG_HEADER = $(top_builddir)/config.h
48: CONFIG_CLEAN_FILES = defines.texi
49: CONFIG_CLEAN_VPATH_FILES =
50: SOURCES =
51: DIST_SOURCES =
52: INFO_DEPS = $(srcdir)/quagga.info
53: am__TEXINFO_TEX_DIR = $(srcdir)
54: DVIS = quagga.dvi
55: PDFS = quagga.pdf
56: PSS = quagga.ps
57: HTMLS = quagga.html
58: TEXINFOS = quagga.texi
59: TEXI2DVI = texi2dvi
60: TEXI2PDF = $(TEXI2DVI) --pdf --batch
61: MAKEINFOHTML = $(MAKEINFO) --html
62: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
63: DVIPS = dvips
64: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
65: "$(DESTDIR)$(man8dir)"
66: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
67: am__vpath_adj = case $$p in \
68: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
69: *) f=$$p;; \
70: esac;
71: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
72: am__install_max = 40
73: am__nobase_strip_setup = \
74: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
75: am__nobase_strip = \
76: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
77: am__nobase_list = $(am__nobase_strip_setup); \
78: for p in $$list; do echo "$$p $$p"; done | \
79: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
80: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
81: if (++n[$$2] == $(am__install_max)) \
82: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
83: END { for (dir in files) print dir, files[dir] }'
84: am__base_list = \
85: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
86: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
87: man1dir = $(mandir)/man1
88: man8dir = $(mandir)/man8
89: NROFF = nroff
90: MANS = $(man_MANS)
91: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
92: ACLOCAL = @ACLOCAL@
93: AMTAR = @AMTAR@
94: AR = @AR@
95: AUTOCONF = @AUTOCONF@
96: AUTOHEADER = @AUTOHEADER@
97: AUTOMAKE = @AUTOMAKE@
98: AWK = @AWK@
99: BGPD = @BGPD@
100: CC = @CC@
101: CCDEPMODE = @CCDEPMODE@
102: CFLAGS = @CFLAGS@
103: CONFDATE = @CONFDATE@
104: CPP = @CPP@
105: CPPFLAGS = @CPPFLAGS@
106: CURSES = @CURSES@
107: CYGPATH_W = @CYGPATH_W@
108: DEFS = @DEFS@
109: DEPDIR = @DEPDIR@
110: DLLTOOL = @DLLTOOL@
111: DOC = @DOC@
112: DSYMUTIL = @DSYMUTIL@
113: DUMPBIN = @DUMPBIN@
114: ECHO_C = @ECHO_C@
115: ECHO_N = @ECHO_N@
116: ECHO_T = @ECHO_T@
117: EGREP = @EGREP@
118: EXEEXT = @EXEEXT@
119: FGREP = @FGREP@
120: GAWK = @GAWK@
121: GREP = @GREP@
122: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
123: IF_METHOD = @IF_METHOD@
124: IF_PROC = @IF_PROC@
125: INCLUDES = @INCLUDES@
126: INSTALL = @INSTALL@
127: INSTALL_DATA = @INSTALL_DATA@
128: INSTALL_PROGRAM = @INSTALL_PROGRAM@
129: INSTALL_SCRIPT = @INSTALL_SCRIPT@
130: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
131: IOCTL_METHOD = @IOCTL_METHOD@
132: IPFORWARD = @IPFORWARD@
133: ISISD = @ISISD@
134: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
135: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
136: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
137: KERNEL_METHOD = @KERNEL_METHOD@
138: LD = @LD@
139: LDFLAGS = @LDFLAGS@
140: LIBCAP = @LIBCAP@
141: LIBM = @LIBM@
142: LIBOBJS = @LIBOBJS@
143: LIBPAM = @LIBPAM@
144: LIBREADLINE = @LIBREADLINE@
145: LIBS = @LIBS@
146: LIBTOOL = @LIBTOOL@
147: LIB_IPV6 = @LIB_IPV6@
148: LIB_REGEX = @LIB_REGEX@
149: LIPO = @LIPO@
150: LN_S = @LN_S@
151: LTLIBOBJS = @LTLIBOBJS@
152: MAKEINFO = @MAKEINFO@
153: MANIFEST_TOOL = @MANIFEST_TOOL@
154: MKDIR_P = @MKDIR_P@
155: MULTIPATH_NUM = @MULTIPATH_NUM@
156: NM = @NM@
157: NMEDIT = @NMEDIT@
158: OBJDUMP = @OBJDUMP@
159: OBJEXT = @OBJEXT@
160: OSPF6D = @OSPF6D@
161: OSPFAPI = @OSPFAPI@
162: OSPFCLIENT = @OSPFCLIENT@
163: OSPFD = @OSPFD@
164: OTHER_METHOD = @OTHER_METHOD@
165: OTOOL = @OTOOL@
166: OTOOL64 = @OTOOL64@
167: PACKAGE = @PACKAGE@
168: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
169: PACKAGE_NAME = @PACKAGE_NAME@
170: PACKAGE_STRING = @PACKAGE_STRING@
171: PACKAGE_TARNAME = @PACKAGE_TARNAME@
172: PACKAGE_URL = @PACKAGE_URL@
173: PACKAGE_VERSION = @PACKAGE_VERSION@
174: PATH_SEPARATOR = @PATH_SEPARATOR@
175: PERL = @PERL@
176: PICFLAGS = @PICFLAGS@
177: PILDFLAGS = @PILDFLAGS@
178: RANLIB = @RANLIB@
179: RIPD = @RIPD@
180: RIPNGD = @RIPNGD@
181: RTREAD_METHOD = @RTREAD_METHOD@
182: RT_METHOD = @RT_METHOD@
183: SED = @SED@
184: SET_MAKE = @SET_MAKE@
185: SHELL = @SHELL@
186: SNMP_INCLUDES = @SNMP_INCLUDES@
187: SOLARIS = @SOLARIS@
188: STRIP = @STRIP@
189: VERSION = @VERSION@
190: VTYSH = @VTYSH@
191: WATCHQUAGGA = @WATCHQUAGGA@
192: ZEBRA = @ZEBRA@
193: abs_builddir = @abs_builddir@
194: abs_srcdir = @abs_srcdir@
195: abs_top_builddir = @abs_top_builddir@
196: abs_top_srcdir = @abs_top_srcdir@
197: ac_ct_AR = @ac_ct_AR@
198: ac_ct_CC = @ac_ct_CC@
199: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
200: am__include = @am__include@
201: am__leading_dot = @am__leading_dot@
202: am__quote = @am__quote@
203: am__tar = @am__tar@
204: am__untar = @am__untar@
205: bindir = @bindir@
206: build = @build@
207: build_alias = @build_alias@
208: build_cpu = @build_cpu@
209: build_os = @build_os@
210: build_vendor = @build_vendor@
211: builddir = @builddir@
212: datadir = @datadir@
213: datarootdir = @datarootdir@
214: docdir = @docdir@
215: dvidir = @dvidir@
216: enable_group = @enable_group@
217: enable_user = @enable_user@
218: enable_vty_group = @enable_vty_group@
219: exampledir = @exampledir@
220: exec_prefix = @exec_prefix@
221: host = @host@
222: host_alias = @host_alias@
223: host_cpu = @host_cpu@
224: host_os = @host_os@
225: host_vendor = @host_vendor@
226: htmldir = @htmldir@
227: includedir = @includedir@
228: infodir = @infodir@
229: install_sh = @install_sh@
230: libdir = @libdir@
231: libexecdir = @libexecdir@
232: localedir = @localedir@
233: localstatedir = @localstatedir@
234: mandir = @mandir@
235: mkdir_p = @mkdir_p@
236: oldincludedir = @oldincludedir@
237: pdfdir = @pdfdir@
238: pkgsrcdir = @pkgsrcdir@
239: pkgsrcrcdir = @pkgsrcrcdir@
240: prefix = @prefix@
241: program_transform_name = @program_transform_name@
242: psdir = @psdir@
243: quagga_statedir = @quagga_statedir@
244: sbindir = @sbindir@
245: sharedstatedir = @sharedstatedir@
246: srcdir = @srcdir@
247: sysconfdir = @sysconfdir@
248: target = @target@
249: target_alias = @target_alias@
250: target_cpu = @target_cpu@
251: target_os = @target_os@
252: target_vendor = @target_vendor@
253: top_build_prefix = @top_build_prefix@
254: top_builddir = @top_builddir@
255: top_srcdir = @top_srcdir@
256:
257: # Dia, the version i have at least, doesn't do very good EPS output
258: # (some of the text is scaled strangely). So this will work, but
259: # it is probably better to use something like gimp to convert the
260: # dia exported PNG files to EPS manually.
261: #
262: # Here we use 'convert' from the well known 'ImageMagick' package
263: # to do conversion from png to eps/pdf for figures.
264: # PDF form is required for quagga.pdf, using PDFTex at least.
265: #
266: # TeX implementation, which we depend on already anyway.
267: #
268: # dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
269: SUFFIXES = .png .eps .dia .pdf
270: DIATOPNG = dia -t png -e
271: DIATOEPS = dia -t eps -e
272: PNGTOEPS = convert -antialias -contrast -despeckle
273: PNGTOPDF = $(PNGTOEPS)
274: EPSTOPDF = epstopdf
275:
276: # The figure sources
277: figures_names_parts = -normal-processing -rs-processing \
278: _topologies_full _topologies_rs
279:
280: figures_sources = $(figures_names_parts:%=fig%.dia)
281: figures_png = $(figures_names_parts:%=fig%.png)
282: figures_pdf = $(figures_names_parts:%=fig%.pdf)
283: figures_eps = $(figures_names_parts:%=fig%.eps)
284: figures_txt = $(figures_names_parts:%=fig%.txt)
285:
286: # rather twisted logic because we have to build PDFs of the EPS figures for
287: # PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
288: # cant rely on a single automatic rule for *.pdf, eg the one automatically
289: # provided by automake. If you are an automake wizard, please feel free to
290: # compact it somehow.
291:
292: # Built from defines.texi.in
293: BUILT_SOURCES = defines.texi
294: info_TEXINFOS = quagga.texi
295: quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi install.texi \
296: ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi overview.texi \
297: protocol.texi ripd.texi ripngd.texi routemap.texi snmp.texi \
298: vtysh.texi routeserver.texi defines.texi $(figures_png) snmptrap.texi \
299: $(figures_txt)
300:
301: man_MANS = vtysh.1 bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8 isisd.8
302: EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt $(man_MANS) \
303: mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
304: mpls/opaque_lsa.txt mpls/ospfd.conf \
305: $(figures_sources) $(figures_png) $(figures_txt)
306:
307: all: $(BUILT_SOURCES)
308: $(MAKE) $(AM_MAKEFLAGS) all-am
309:
310: .SUFFIXES:
311: .SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
312: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
313: @for dep in $?; do \
314: case '$(am__configure_deps)' in \
315: *$$dep*) \
316: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
317: && { if test -f $@; then exit 0; else break; fi; }; \
318: exit 1;; \
319: esac; \
320: done; \
321: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
322: $(am__cd) $(top_srcdir) && \
323: $(AUTOMAKE) --gnu doc/Makefile
324: .PRECIOUS: Makefile
325: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
326: @case '$?' in \
327: *config.status*) \
328: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
329: *) \
330: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
331: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
332: esac;
333:
334: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
335: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
336:
337: $(top_srcdir)/configure: $(am__configure_deps)
338: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
339: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
340: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
341: $(am__aclocal_m4_deps):
342: defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
343: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
344:
345: mostlyclean-libtool:
346: -rm -f *.lo
347:
348: clean-libtool:
349: -rm -rf .libs _libs
350:
351: .texi.info:
352: restore=: && backupdir="$(am__leading_dot)am$$$$" && \
353: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
354: rm -rf $$backupdir && mkdir $$backupdir && \
355: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
356: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
357: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
358: done; \
359: else :; fi && \
360: cd "$$am__cwd"; \
361: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
362: -o $@ $<; \
363: then \
364: rc=0; \
365: $(am__cd) $(srcdir); \
366: else \
367: rc=$$?; \
368: $(am__cd) $(srcdir) && \
369: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
370: fi; \
371: rm -rf $$backupdir; exit $$rc
372:
373: .texi.dvi:
374: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
375: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
376: $(TEXI2DVI) $<
377:
378: .texi.pdf:
379: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
380: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
381: $(TEXI2PDF) $<
382:
383: .texi.html:
384: rm -rf $(@:.html=.htp)
385: if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
386: -o $(@:.html=.htp) $<; \
387: then \
388: rm -rf $@; \
389: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
390: mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
391: else \
392: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
393: rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
394: exit 1; \
395: fi
396: $(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
397: quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
398: quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
399: $(srcdir)/version.texi: $(srcdir)/stamp-vti
400: $(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
401: @(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
402: set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
403: echo "@set UPDATED $$1 $$2 $$3"; \
404: echo "@set UPDATED-MONTH $$2 $$3"; \
405: echo "@set EDITION $(VERSION)"; \
406: echo "@set VERSION $(VERSION)") > vti.tmp
407: @cmp -s vti.tmp $(srcdir)/version.texi \
408: || (echo "Updating $(srcdir)/version.texi"; \
409: cp vti.tmp $(srcdir)/version.texi)
410: -@rm -f vti.tmp
411: @cp $(srcdir)/version.texi $@
412:
413: mostlyclean-vti:
414: -rm -f vti.tmp
415:
416: maintainer-clean-vti:
417: -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
418: .dvi.ps:
419: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
420: $(DVIPS) -o $@ $<
421:
422: uninstall-dvi-am:
423: @$(NORMAL_UNINSTALL)
424: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
425: for p in $$list; do \
426: $(am__strip_dir) \
427: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
428: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
429: done
430:
431: uninstall-html-am:
432: @$(NORMAL_UNINSTALL)
433: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
434: for p in $$list; do \
435: $(am__strip_dir) \
436: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
437: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
438: done
439:
440: uninstall-info-am:
441: @$(PRE_UNINSTALL)
442: @if test -d '$(DESTDIR)$(infodir)' && \
443: (install-info --version && \
444: install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
445: list='$(INFO_DEPS)'; \
446: for file in $$list; do \
447: relfile=`echo "$$file" | sed 's|^.*/||'`; \
448: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
449: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
450: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
451: done; \
452: else :; fi
453: @$(NORMAL_UNINSTALL)
454: @list='$(INFO_DEPS)'; \
455: for file in $$list; do \
456: relfile=`echo "$$file" | sed 's|^.*/||'`; \
457: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
458: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
459: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
460: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
461: else :; fi); \
462: done
463:
464: uninstall-pdf-am:
465: @$(NORMAL_UNINSTALL)
466: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
467: for p in $$list; do \
468: $(am__strip_dir) \
469: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
470: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
471: done
472:
473: uninstall-ps-am:
474: @$(NORMAL_UNINSTALL)
475: @list='$(PSS)'; test -n "$(psdir)" || list=; \
476: for p in $$list; do \
477: $(am__strip_dir) \
478: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
479: rm -f "$(DESTDIR)$(psdir)/$$f"; \
480: done
481:
482: dist-info: $(INFO_DEPS)
483: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
484: list='$(INFO_DEPS)'; \
485: for base in $$list; do \
486: case $$base in \
487: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
488: esac; \
489: if test -f $$base; then d=.; else d=$(srcdir); fi; \
490: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
491: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
492: if test -f $$file; then \
493: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
494: test -f "$(distdir)/$$relfile" || \
495: cp -p $$file "$(distdir)/$$relfile"; \
496: else :; fi; \
497: done; \
498: done
499:
500: mostlyclean-aminfo:
501: -rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
502: quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
503: quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
504:
505: clean-aminfo:
506: -test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
507: || rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
508:
509: maintainer-clean-aminfo:
510: @list='$(INFO_DEPS)'; for i in $$list; do \
511: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
512: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
513: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
514: done
515: install-man1: $(man_MANS)
516: @$(NORMAL_INSTALL)
517: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
518: @list=''; test -n "$(man1dir)" || exit 0; \
519: { for i in $$list; do echo "$$i"; done; \
520: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
521: sed -n '/\.1[a-z]*$$/p'; \
522: } | while read p; do \
523: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
524: echo "$$d$$p"; echo "$$p"; \
525: done | \
526: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
527: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
528: sed 'N;N;s,\n, ,g' | { \
529: list=; while read file base inst; do \
530: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
531: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
532: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
533: fi; \
534: done; \
535: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
536: while read files; do \
537: test -z "$$files" || { \
538: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
539: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
540: done; }
541:
542: uninstall-man1:
543: @$(NORMAL_UNINSTALL)
544: @list=''; test -n "$(man1dir)" || exit 0; \
545: files=`{ for i in $$list; do echo "$$i"; done; \
546: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
547: sed -n '/\.1[a-z]*$$/p'; \
548: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
549: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
550: test -z "$$files" || { \
551: echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
552: cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
553: install-man8: $(man_MANS)
554: @$(NORMAL_INSTALL)
555: test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
556: @list=''; test -n "$(man8dir)" || exit 0; \
557: { for i in $$list; do echo "$$i"; done; \
558: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
559: sed -n '/\.8[a-z]*$$/p'; \
560: } | while read p; do \
561: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
562: echo "$$d$$p"; echo "$$p"; \
563: done | \
564: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
565: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
566: sed 'N;N;s,\n, ,g' | { \
567: list=; while read file base inst; do \
568: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
569: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
570: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
571: fi; \
572: done; \
573: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
574: while read files; do \
575: test -z "$$files" || { \
576: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
577: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
578: done; }
579:
580: uninstall-man8:
581: @$(NORMAL_UNINSTALL)
582: @list=''; test -n "$(man8dir)" || exit 0; \
583: files=`{ for i in $$list; do echo "$$i"; done; \
584: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
585: sed -n '/\.8[a-z]*$$/p'; \
586: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
587: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
588: test -z "$$files" || { \
589: echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
590: cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
591: tags: TAGS
592: TAGS:
593:
594: ctags: CTAGS
595: CTAGS:
596:
597:
598: distdir: $(DISTFILES)
599: @list='$(MANS)'; if test -n "$$list"; then \
600: list=`for p in $$list; do \
601: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
602: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
603: if test -n "$$list" && \
604: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
605: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
606: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
607: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
608: echo " typically \`make maintainer-clean' will remove them" >&2; \
609: exit 1; \
610: else :; fi; \
611: else :; fi
612: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
613: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
614: list='$(DISTFILES)'; \
615: dist_files=`for file in $$list; do echo $$file; done | \
616: sed -e "s|^$$srcdirstrip/||;t" \
617: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
618: case $$dist_files in \
619: */*) $(MKDIR_P) `echo "$$dist_files" | \
620: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
621: sort -u` ;; \
622: esac; \
623: for file in $$dist_files; do \
624: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
625: if test -d $$d/$$file; then \
626: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
627: if test -d "$(distdir)/$$file"; then \
628: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
629: fi; \
630: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
631: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
632: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
633: fi; \
634: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
635: else \
636: test -f "$(distdir)/$$file" \
637: || cp -p $$d/$$file "$(distdir)/$$file" \
638: || exit 1; \
639: fi; \
640: done
641: $(MAKE) $(AM_MAKEFLAGS) \
642: top_distdir="$(top_distdir)" distdir="$(distdir)" \
643: dist-info
644: check-am: all-am
645: check: $(BUILT_SOURCES)
646: $(MAKE) $(AM_MAKEFLAGS) check-am
647: all-am: Makefile $(INFO_DEPS) $(MANS)
648: installdirs:
649: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
650: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
651: done
652: install: $(BUILT_SOURCES)
653: $(MAKE) $(AM_MAKEFLAGS) install-am
654: install-exec: install-exec-am
655: install-data: install-data-am
656: uninstall: uninstall-am
657:
658: install-am: all-am
659: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
660:
661: installcheck: installcheck-am
662: install-strip:
663: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
664: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
665: `test -z '$(STRIP)' || \
666: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
667: mostlyclean-generic:
668:
669: clean-generic:
670:
671: distclean-generic:
672: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
673: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
674:
675: maintainer-clean-generic:
676: @echo "This command is intended for maintainers to use"
677: @echo "it deletes files that may require special tools to rebuild."
678: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
679: clean: clean-am
680:
681: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
682:
683: distclean: distclean-am
684: -rm -f Makefile
685: distclean-am: clean-am distclean-generic
686:
687: dvi: dvi-am
688:
689: dvi-am: $(DVIS)
690:
691: html: html-am
692:
693: html-am: $(HTMLS)
694:
695: info: info-am
696:
697: info-am: $(INFO_DEPS)
698:
699: install-data-am: install-info-am install-man
700:
701: install-dvi: install-dvi-am
702:
703: install-dvi-am: $(DVIS)
704: @$(NORMAL_INSTALL)
705: test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
706: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
707: for p in $$list; do \
708: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
709: echo "$$d$$p"; \
710: done | $(am__base_list) | \
711: while read files; do \
712: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
713: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
714: done
715: install-exec-am:
716:
717: install-html: install-html-am
718:
719: install-html-am: $(HTMLS)
720: @$(NORMAL_INSTALL)
721: test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
722: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
723: for p in $$list; do \
724: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
725: $(am__strip_dir) \
726: if test -d "$$d$$p"; then \
727: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
728: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
729: echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
730: $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
731: else \
732: list2="$$list2 $$d$$p"; \
733: fi; \
734: done; \
735: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
736: while read files; do \
737: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
738: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
739: done; }
740: install-info: install-info-am
741:
742: install-info-am: $(INFO_DEPS)
743: @$(NORMAL_INSTALL)
744: test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
745: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
746: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
747: for file in $$list; do \
748: case $$file in \
749: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
750: esac; \
751: if test -f $$file; then d=.; else d=$(srcdir); fi; \
752: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
753: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
754: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
755: if test -f $$ifile; then \
756: echo "$$ifile"; \
757: else : ; fi; \
758: done; \
759: done | $(am__base_list) | \
760: while read files; do \
761: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
762: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
763: @$(POST_INSTALL)
764: @if (install-info --version && \
765: install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
766: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
767: for file in $$list; do \
768: relfile=`echo "$$file" | sed 's|^.*/||'`; \
769: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
770: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
771: done; \
772: else : ; fi
773: install-man: install-man1 install-man8
774:
775: install-pdf: install-pdf-am
776:
777: install-pdf-am: $(PDFS)
778: @$(NORMAL_INSTALL)
779: test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
780: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
781: for p in $$list; do \
782: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
783: echo "$$d$$p"; \
784: done | $(am__base_list) | \
785: while read files; do \
786: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
787: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
788: install-ps: install-ps-am
789:
790: install-ps-am: $(PSS)
791: @$(NORMAL_INSTALL)
792: test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
793: @list='$(PSS)'; test -n "$(psdir)" || list=; \
794: for p in $$list; do \
795: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
796: echo "$$d$$p"; \
797: done | $(am__base_list) | \
798: while read files; do \
799: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
800: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
801: installcheck-am:
802:
803: maintainer-clean: maintainer-clean-am
804: -rm -f Makefile
805: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
806: maintainer-clean-generic maintainer-clean-vti
807:
808: mostlyclean: mostlyclean-am
809:
810: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
811: mostlyclean-libtool mostlyclean-vti
812:
813: pdf: pdf-am
814:
815: pdf-am: $(PDFS)
816:
817: ps: ps-am
818:
819: ps-am: $(PSS)
820:
821: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
822: uninstall-man uninstall-pdf-am uninstall-ps-am
823:
824: uninstall-man: uninstall-man1 uninstall-man8
825:
826: .MAKE: all check install install-am install-strip
827:
828: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
829: clean-libtool dist-info distclean distclean-generic \
830: distclean-libtool distdir dvi dvi-am html html-am info info-am \
831: install install-am install-data install-data-am install-dvi \
832: install-dvi-am install-exec install-exec-am install-html \
833: install-html-am install-info install-info-am install-man \
834: install-man1 install-man8 install-pdf install-pdf-am \
835: install-ps install-ps-am install-strip installcheck \
836: installcheck-am installdirs maintainer-clean \
837: maintainer-clean-aminfo maintainer-clean-generic \
838: maintainer-clean-vti mostlyclean mostlyclean-aminfo \
839: mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
840: pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
841: uninstall-html-am uninstall-info-am uninstall-man \
842: uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
843:
844:
845: # Have to manually specify the quagga.pdf rule in order to allow
846: # us to have a generic automatic .pdf rule to build the figure sources
847: # because it cant just work from the png's directly it seems - contrary
848: # to the documentation...
849: quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
850: $(TEXI2PDF) -o "$@" $<
851:
852: .png.eps:
853: $(PNGTOEPS) $< "$@"
854:
855: .png.pdf:
856: $(PNGTOPDF) $< "$@"
857:
858: .dia.png:
859: $(DIATOPNG) "$@" $<
860:
861: draft-zebra-00.txt: draft-zebra-00.ms
862: groff -T ascii -ms $< > $@
863:
864: # Tell versions [3.59,3.63) of GNU make to not export all variables.
865: # Otherwise a system limit (for SysV at least) may be exceeded.
866: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc