Annotation of embedaddon/quagga/doc/Makefile.in, revision 1.1.1.5
1.1.1.5 ! misho 1: # Makefile.in generated by automake 1.11.6 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
1.1.1.5 ! misho 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
! 6: # Foundation, Inc.
1.1 misho 7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
1.1.1.3 misho 18: am__make_dryrun = \
19: { \
20: am__dry=no; \
21: case $$MAKEFLAGS in \
22: *\\[\ \ ]*) \
23: echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
24: | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
25: *) \
26: for am__flg in $$MAKEFLAGS; do \
27: case $$am__flg in \
28: *=*|--*) ;; \
29: *n*) am__dry=yes; break;; \
30: esac; \
31: done;; \
32: esac; \
33: test $$am__dry = yes; \
34: }
1.1 misho 35: pkgdatadir = $(datadir)/@PACKAGE@
36: pkgincludedir = $(includedir)/@PACKAGE@
37: pkglibdir = $(libdir)/@PACKAGE@
38: pkglibexecdir = $(libexecdir)/@PACKAGE@
39: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
40: install_sh_DATA = $(install_sh) -c -m 644
41: install_sh_PROGRAM = $(install_sh) -c
42: install_sh_SCRIPT = $(install_sh) -c
43: INSTALL_HEADER = $(INSTALL_DATA)
44: transform = $(program_transform_name)
45: NORMAL_INSTALL = :
46: PRE_INSTALL = :
47: POST_INSTALL = :
48: NORMAL_UNINSTALL = :
49: PRE_UNINSTALL = :
50: POST_UNINSTALL = :
51: build_triplet = @build@
52: host_triplet = @host@
53: target_triplet = @target@
1.1.1.5 ! misho 54: @PIMD_TRUE@am__append_1 = pimd.8
! 55: @BGPD_TRUE@am__append_2 = bgpd.8
! 56: @ISISD_TRUE@am__append_3 = isisd.8
! 57: @OSPF6D_TRUE@am__append_4 = ospf6d.8
! 58: @OSPFCLIENT_TRUE@am__append_5 = ospfclient.8
! 59: @OSPFD_TRUE@am__append_6 = ospfd.8
! 60: @RIPD_TRUE@am__append_7 = ripd.8
! 61: @RIPNGD_TRUE@am__append_8 = ripngd.8
! 62: @VTYSH_TRUE@am__append_9 = vtysh.1
! 63: @WATCHQUAGGA_TRUE@am__append_10 = watchquagga.8
! 64: @ZEBRA_TRUE@am__append_11 = zebra.8
1.1 misho 65: subdir = doc
66: DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
67: $(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
68: $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
69: texinfo.tex
70: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
1.1.1.4 misho 71: am__aclocal_m4_deps = $(top_srcdir)/m4/ax_sys_weak_alias.m4 \
72: $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
73: $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
74: $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
1.1 misho 75: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
76: $(ACLOCAL_M4)
77: mkinstalldirs = $(install_sh) -d
78: CONFIG_HEADER = $(top_builddir)/config.h
79: CONFIG_CLEAN_FILES = defines.texi
80: CONFIG_CLEAN_VPATH_FILES =
1.1.1.5 ! misho 81: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 82: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 83: am__v_GEN_0 = @echo " GEN " $@;
! 84: AM_V_at = $(am__v_at_@AM_V@)
! 85: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 86: am__v_at_0 = @
1.1 misho 87: SOURCES =
88: DIST_SOURCES =
89: INFO_DEPS = $(srcdir)/quagga.info
90: am__TEXINFO_TEX_DIR = $(srcdir)
91: DVIS = quagga.dvi
92: PDFS = quagga.pdf
93: PSS = quagga.ps
94: HTMLS = quagga.html
95: TEXINFOS = quagga.texi
96: TEXI2DVI = texi2dvi
97: TEXI2PDF = $(TEXI2DVI) --pdf --batch
98: MAKEINFOHTML = $(MAKEINFO) --html
99: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
100: DVIPS = dvips
1.1.1.3 misho 101: am__can_run_installinfo = \
102: case $$AM_UPDATE_INFO_DIR in \
103: n|no|NO) false;; \
104: *) (install-info --version) >/dev/null 2>&1;; \
105: esac
1.1 misho 106: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
107: "$(DESTDIR)$(man8dir)"
108: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
109: am__vpath_adj = case $$p in \
110: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
111: *) f=$$p;; \
112: esac;
113: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
114: am__install_max = 40
115: am__nobase_strip_setup = \
116: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
117: am__nobase_strip = \
118: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
119: am__nobase_list = $(am__nobase_strip_setup); \
120: for p in $$list; do echo "$$p $$p"; done | \
121: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
122: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
123: if (++n[$$2] == $(am__install_max)) \
124: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
125: END { for (dir in files) print dir, files[dir] }'
126: am__base_list = \
127: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
128: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
1.1.1.2 misho 129: am__uninstall_files_from_dir = { \
130: test -z "$$files" \
131: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
132: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
133: $(am__cd) "$$dir" && rm -f $$files; }; \
134: }
1.1 misho 135: man1dir = $(mandir)/man1
136: man8dir = $(mandir)/man8
137: NROFF = nroff
138: MANS = $(man_MANS)
139: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
140: ACLOCAL = @ACLOCAL@
141: AMTAR = @AMTAR@
1.1.1.5 ! misho 142: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
1.1 misho 143: AR = @AR@
144: AUTOCONF = @AUTOCONF@
145: AUTOHEADER = @AUTOHEADER@
146: AUTOMAKE = @AUTOMAKE@
147: AWK = @AWK@
148: BGPD = @BGPD@
149: CC = @CC@
150: CCDEPMODE = @CCDEPMODE@
151: CFLAGS = @CFLAGS@
152: CONFDATE = @CONFDATE@
1.1.1.5 ! misho 153: CONFIG_ARGS = @CONFIG_ARGS@
1.1 misho 154: CPP = @CPP@
155: CPPFLAGS = @CPPFLAGS@
156: CURSES = @CURSES@
157: CYGPATH_W = @CYGPATH_W@
158: DEFS = @DEFS@
1.1.1.5 ! misho 159: DEJAGNU = @DEJAGNU@
1.1 misho 160: DEPDIR = @DEPDIR@
161: DLLTOOL = @DLLTOOL@
162: DOC = @DOC@
163: DSYMUTIL = @DSYMUTIL@
164: DUMPBIN = @DUMPBIN@
165: ECHO_C = @ECHO_C@
166: ECHO_N = @ECHO_N@
167: ECHO_T = @ECHO_T@
168: EGREP = @EGREP@
169: EXEEXT = @EXEEXT@
170: FGREP = @FGREP@
171: GAWK = @GAWK@
172: GREP = @GREP@
173: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
174: IF_METHOD = @IF_METHOD@
175: INSTALL = @INSTALL@
176: INSTALL_DATA = @INSTALL_DATA@
177: INSTALL_PROGRAM = @INSTALL_PROGRAM@
178: INSTALL_SCRIPT = @INSTALL_SCRIPT@
179: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
180: IOCTL_METHOD = @IOCTL_METHOD@
181: IPFORWARD = @IPFORWARD@
182: ISISD = @ISISD@
183: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
184: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
185: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
186: KERNEL_METHOD = @KERNEL_METHOD@
1.1.1.3 misho 187: LATEXMK = @LATEXMK@
1.1 misho 188: LD = @LD@
189: LDFLAGS = @LDFLAGS@
190: LIBCAP = @LIBCAP@
191: LIBM = @LIBM@
192: LIBOBJS = @LIBOBJS@
193: LIBPAM = @LIBPAM@
194: LIBREADLINE = @LIBREADLINE@
195: LIBS = @LIBS@
196: LIBTOOL = @LIBTOOL@
197: LIB_REGEX = @LIB_REGEX@
198: LIPO = @LIPO@
199: LN_S = @LN_S@
200: LTLIBOBJS = @LTLIBOBJS@
201: MAKEINFO = @MAKEINFO@
202: MANIFEST_TOOL = @MANIFEST_TOOL@
203: MKDIR_P = @MKDIR_P@
1.1.1.4 misho 204: NETSNMP_CONFIG = @NETSNMP_CONFIG@
1.1 misho 205: NM = @NM@
206: NMEDIT = @NMEDIT@
207: OBJDUMP = @OBJDUMP@
208: OBJEXT = @OBJEXT@
209: OSPF6D = @OSPF6D@
210: OSPFAPI = @OSPFAPI@
211: OSPFCLIENT = @OSPFCLIENT@
212: OSPFD = @OSPFD@
213: OTOOL = @OTOOL@
214: OTOOL64 = @OTOOL64@
215: PACKAGE = @PACKAGE@
216: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
217: PACKAGE_NAME = @PACKAGE_NAME@
218: PACKAGE_STRING = @PACKAGE_STRING@
219: PACKAGE_TARNAME = @PACKAGE_TARNAME@
220: PACKAGE_URL = @PACKAGE_URL@
221: PACKAGE_VERSION = @PACKAGE_VERSION@
222: PATH_SEPARATOR = @PATH_SEPARATOR@
1.1.1.3 misho 223: PDFLATEX = @PDFLATEX@
1.1 misho 224: PERL = @PERL@
1.1.1.5 ! misho 225: PIMD = @PIMD@
1.1 misho 226: RANLIB = @RANLIB@
227: RIPD = @RIPD@
228: RIPNGD = @RIPNGD@
229: RTREAD_METHOD = @RTREAD_METHOD@
230: RT_METHOD = @RT_METHOD@
1.1.1.5 ! misho 231: RUNTESTDEFAULTFLAGS = @RUNTESTDEFAULTFLAGS@
1.1 misho 232: SED = @SED@
233: SET_MAKE = @SET_MAKE@
234: SHELL = @SHELL@
235: SOLARIS = @SOLARIS@
236: STRIP = @STRIP@
237: VERSION = @VERSION@
238: VTYSH = @VTYSH@
239: WATCHQUAGGA = @WATCHQUAGGA@
1.1.1.4 misho 240: WEAK_ALIAS = @WEAK_ALIAS@
241: WEAK_ALIAS_CROSSFILE = @WEAK_ALIAS_CROSSFILE@
1.1.1.5 ! misho 242: WERROR = @WERROR@
1.1 misho 243: ZEBRA = @ZEBRA@
244: abs_builddir = @abs_builddir@
245: abs_srcdir = @abs_srcdir@
246: abs_top_builddir = @abs_top_builddir@
247: abs_top_srcdir = @abs_top_srcdir@
248: ac_ct_AR = @ac_ct_AR@
249: ac_ct_CC = @ac_ct_CC@
250: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
251: am__include = @am__include@
252: am__leading_dot = @am__leading_dot@
253: am__quote = @am__quote@
254: am__tar = @am__tar@
255: am__untar = @am__untar@
256: bindir = @bindir@
257: build = @build@
258: build_alias = @build_alias@
259: build_cpu = @build_cpu@
260: build_os = @build_os@
261: build_vendor = @build_vendor@
262: builddir = @builddir@
263: datadir = @datadir@
264: datarootdir = @datarootdir@
265: docdir = @docdir@
266: dvidir = @dvidir@
267: enable_group = @enable_group@
268: enable_user = @enable_user@
269: enable_vty_group = @enable_vty_group@
270: exampledir = @exampledir@
271: exec_prefix = @exec_prefix@
272: host = @host@
273: host_alias = @host_alias@
274: host_cpu = @host_cpu@
275: host_os = @host_os@
276: host_vendor = @host_vendor@
277: htmldir = @htmldir@
278: includedir = @includedir@
279: infodir = @infodir@
280: install_sh = @install_sh@
281: libdir = @libdir@
282: libexecdir = @libexecdir@
283: localedir = @localedir@
284: localstatedir = @localstatedir@
285: mandir = @mandir@
286: mkdir_p = @mkdir_p@
287: oldincludedir = @oldincludedir@
288: pdfdir = @pdfdir@
289: pkgsrcdir = @pkgsrcdir@
290: pkgsrcrcdir = @pkgsrcrcdir@
291: prefix = @prefix@
292: program_transform_name = @program_transform_name@
293: psdir = @psdir@
294: quagga_statedir = @quagga_statedir@
295: sbindir = @sbindir@
296: sharedstatedir = @sharedstatedir@
297: srcdir = @srcdir@
298: sysconfdir = @sysconfdir@
299: target = @target@
300: target_alias = @target_alias@
301: target_cpu = @target_cpu@
302: target_os = @target_os@
303: target_vendor = @target_vendor@
304: top_build_prefix = @top_build_prefix@
305: top_builddir = @top_builddir@
306: top_srcdir = @top_srcdir@
307:
308: # Dia, the version i have at least, doesn't do very good EPS output
309: # (some of the text is scaled strangely). So this will work, but
310: # it is probably better to use something like gimp to convert the
311: # dia exported PNG files to EPS manually.
312: #
313: # Here we use 'convert' from the well known 'ImageMagick' package
314: # to do conversion from png to eps/pdf for figures.
315: # PDF form is required for quagga.pdf, using PDFTex at least.
316: #
317: # TeX implementation, which we depend on already anyway.
318: #
319: # dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
320: SUFFIXES = .png .eps .dia .pdf
321: DIATOPNG = dia -t png -e
322: DIATOEPS = dia -t eps -e
323: PNGTOEPS = convert -antialias -contrast -despeckle
324: PNGTOPDF = $(PNGTOEPS)
325: EPSTOPDF = epstopdf
326:
327: # The figure sources
328: figures_names_parts = -normal-processing -rs-processing \
329: _topologies_full _topologies_rs
330:
331: figures_sources = $(figures_names_parts:%=fig%.dia)
332: figures_png = $(figures_names_parts:%=fig%.png)
333: figures_pdf = $(figures_names_parts:%=fig%.pdf)
334: figures_eps = $(figures_names_parts:%=fig%.eps)
335: figures_txt = $(figures_names_parts:%=fig%.txt)
336:
337: # rather twisted logic because we have to build PDFs of the EPS figures for
338: # PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
339: # cant rely on a single automatic rule for *.pdf, eg the one automatically
340: # provided by automake. If you are an automake wizard, please feel free to
341: # compact it somehow.
342:
343: # Built from defines.texi.in
344: BUILT_SOURCES = defines.texi
345: info_TEXINFOS = quagga.texi
1.1.1.5 ! misho 346: quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi \
1.1.1.3 misho 347: install.texi ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi \
348: overview.texi protocol.texi ripd.texi ripngd.texi routemap.texi \
349: snmp.texi vtysh.texi routeserver.texi defines.texi $(figures_png) \
1.1.1.5 ! misho 350: snmptrap.texi ospf_fundamentals.texi $(figures_txt)
1.1.1.3 misho 351:
352: man_MANS = $(am__append_1) $(am__append_2) $(am__append_3) \
353: $(am__append_4) $(am__append_5) $(am__append_6) \
354: $(am__append_7) $(am__append_8) $(am__append_9) \
1.1.1.5 ! misho 355: $(am__append_10) $(am__append_11)
1.1.1.3 misho 356: EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt \
357: bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ripd.8 \
1.1.1.5 ! misho 358: ripngd.8 pimd.8 vtysh.1 watchquagga.8 zebra.8 \
1.1 misho 359: mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
360: mpls/opaque_lsa.txt mpls/ospfd.conf \
1.1.1.5 ! misho 361: $(figures_sources) $(figures_png) $(figures_txt) \
! 362: texinfo.tex
1.1 misho 363:
364: all: $(BUILT_SOURCES)
365: $(MAKE) $(AM_MAKEFLAGS) all-am
366:
367: .SUFFIXES:
368: .SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
369: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
370: @for dep in $?; do \
371: case '$(am__configure_deps)' in \
372: *$$dep*) \
373: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
374: && { if test -f $@; then exit 0; else break; fi; }; \
375: exit 1;; \
376: esac; \
377: done; \
378: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
379: $(am__cd) $(top_srcdir) && \
380: $(AUTOMAKE) --gnu doc/Makefile
381: .PRECIOUS: Makefile
382: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
383: @case '$?' in \
384: *config.status*) \
385: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
386: *) \
387: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
388: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
389: esac;
390:
391: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
392: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
393:
394: $(top_srcdir)/configure: $(am__configure_deps)
395: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
396: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
397: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
398: $(am__aclocal_m4_deps):
399: defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
400: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
401:
402: mostlyclean-libtool:
403: -rm -f *.lo
404:
405: clean-libtool:
406: -rm -rf .libs _libs
407:
408: .texi.info:
409: restore=: && backupdir="$(am__leading_dot)am$$$$" && \
410: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
411: rm -rf $$backupdir && mkdir $$backupdir && \
412: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
413: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
414: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
415: done; \
416: else :; fi && \
417: cd "$$am__cwd"; \
418: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
419: -o $@ $<; \
420: then \
421: rc=0; \
422: $(am__cd) $(srcdir); \
423: else \
424: rc=$$?; \
425: $(am__cd) $(srcdir) && \
426: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
427: fi; \
428: rm -rf $$backupdir; exit $$rc
429:
430: .texi.dvi:
431: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
432: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
1.1.1.5 ! misho 433: $(TEXI2DVI) $<
1.1 misho 434:
435: .texi.pdf:
436: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
437: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
1.1.1.5 ! misho 438: $(TEXI2PDF) $<
1.1 misho 439:
440: .texi.html:
441: rm -rf $(@:.html=.htp)
442: if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
443: -o $(@:.html=.htp) $<; \
444: then \
445: rm -rf $@; \
446: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
447: mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
448: else \
449: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
450: rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
451: exit 1; \
452: fi
453: $(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
454: quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
455: quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
456: $(srcdir)/version.texi: $(srcdir)/stamp-vti
457: $(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
458: @(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
459: set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
460: echo "@set UPDATED $$1 $$2 $$3"; \
461: echo "@set UPDATED-MONTH $$2 $$3"; \
462: echo "@set EDITION $(VERSION)"; \
463: echo "@set VERSION $(VERSION)") > vti.tmp
464: @cmp -s vti.tmp $(srcdir)/version.texi \
465: || (echo "Updating $(srcdir)/version.texi"; \
466: cp vti.tmp $(srcdir)/version.texi)
467: -@rm -f vti.tmp
468: @cp $(srcdir)/version.texi $@
469:
470: mostlyclean-vti:
471: -rm -f vti.tmp
472:
473: maintainer-clean-vti:
474: -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
475: .dvi.ps:
476: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
1.1.1.5 ! misho 477: $(DVIPS) -o $@ $<
1.1 misho 478:
479: uninstall-dvi-am:
480: @$(NORMAL_UNINSTALL)
481: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
482: for p in $$list; do \
483: $(am__strip_dir) \
484: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
485: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
486: done
487:
488: uninstall-html-am:
489: @$(NORMAL_UNINSTALL)
490: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
491: for p in $$list; do \
492: $(am__strip_dir) \
493: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
494: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
495: done
496:
497: uninstall-info-am:
498: @$(PRE_UNINSTALL)
1.1.1.3 misho 499: @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
1.1 misho 500: list='$(INFO_DEPS)'; \
501: for file in $$list; do \
502: relfile=`echo "$$file" | sed 's|^.*/||'`; \
503: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
504: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
505: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
506: done; \
507: else :; fi
508: @$(NORMAL_UNINSTALL)
509: @list='$(INFO_DEPS)'; \
510: for file in $$list; do \
511: relfile=`echo "$$file" | sed 's|^.*/||'`; \
512: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
513: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
514: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
515: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
516: else :; fi); \
517: done
518:
519: uninstall-pdf-am:
520: @$(NORMAL_UNINSTALL)
521: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
522: for p in $$list; do \
523: $(am__strip_dir) \
524: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
525: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
526: done
527:
528: uninstall-ps-am:
529: @$(NORMAL_UNINSTALL)
530: @list='$(PSS)'; test -n "$(psdir)" || list=; \
531: for p in $$list; do \
532: $(am__strip_dir) \
533: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
534: rm -f "$(DESTDIR)$(psdir)/$$f"; \
535: done
536:
537: dist-info: $(INFO_DEPS)
538: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
539: list='$(INFO_DEPS)'; \
540: for base in $$list; do \
541: case $$base in \
542: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
543: esac; \
544: if test -f $$base; then d=.; else d=$(srcdir); fi; \
545: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
546: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
547: if test -f $$file; then \
548: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
549: test -f "$(distdir)/$$relfile" || \
550: cp -p $$file "$(distdir)/$$relfile"; \
551: else :; fi; \
552: done; \
553: done
554:
555: mostlyclean-aminfo:
556: -rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
557: quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
558: quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
559:
560: clean-aminfo:
561: -test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
562: || rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
563:
564: maintainer-clean-aminfo:
565: @list='$(INFO_DEPS)'; for i in $$list; do \
566: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
567: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
568: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
569: done
570: install-man1: $(man_MANS)
571: @$(NORMAL_INSTALL)
1.1.1.3 misho 572: @list1=''; \
573: list2='$(man_MANS)'; \
574: test -n "$(man1dir)" \
575: && test -n "`echo $$list1$$list2`" \
576: || exit 0; \
577: echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
578: $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
579: { for i in $$list1; do echo "$$i"; done; \
580: if test -n "$$list2"; then \
581: for i in $$list2; do echo "$$i"; done \
582: | sed -n '/\.1[a-z]*$$/p'; \
583: fi; \
1.1 misho 584: } | while read p; do \
585: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
586: echo "$$d$$p"; echo "$$p"; \
587: done | \
588: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
589: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
590: sed 'N;N;s,\n, ,g' | { \
591: list=; while read file base inst; do \
592: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
593: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
594: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
595: fi; \
596: done; \
597: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
598: while read files; do \
599: test -z "$$files" || { \
600: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
601: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
602: done; }
603:
604: uninstall-man1:
605: @$(NORMAL_UNINSTALL)
606: @list=''; test -n "$(man1dir)" || exit 0; \
607: files=`{ for i in $$list; do echo "$$i"; done; \
608: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
609: sed -n '/\.1[a-z]*$$/p'; \
610: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
611: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
1.1.1.2 misho 612: dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
1.1 misho 613: install-man8: $(man_MANS)
614: @$(NORMAL_INSTALL)
1.1.1.3 misho 615: @list1=''; \
616: list2='$(man_MANS)'; \
617: test -n "$(man8dir)" \
618: && test -n "`echo $$list1$$list2`" \
619: || exit 0; \
620: echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
621: $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
622: { for i in $$list1; do echo "$$i"; done; \
623: if test -n "$$list2"; then \
624: for i in $$list2; do echo "$$i"; done \
625: | sed -n '/\.8[a-z]*$$/p'; \
626: fi; \
1.1 misho 627: } | while read p; do \
628: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
629: echo "$$d$$p"; echo "$$p"; \
630: done | \
631: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
632: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
633: sed 'N;N;s,\n, ,g' | { \
634: list=; while read file base inst; do \
635: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
636: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
637: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
638: fi; \
639: done; \
640: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
641: while read files; do \
642: test -z "$$files" || { \
643: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
644: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
645: done; }
646:
647: uninstall-man8:
648: @$(NORMAL_UNINSTALL)
649: @list=''; test -n "$(man8dir)" || exit 0; \
650: files=`{ for i in $$list; do echo "$$i"; done; \
651: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
652: sed -n '/\.8[a-z]*$$/p'; \
653: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
654: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
1.1.1.2 misho 655: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
1.1 misho 656: tags: TAGS
657: TAGS:
658:
659: ctags: CTAGS
660: CTAGS:
661:
662:
663: distdir: $(DISTFILES)
664: @list='$(MANS)'; if test -n "$$list"; then \
665: list=`for p in $$list; do \
666: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
667: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
668: if test -n "$$list" && \
669: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
1.1.1.5 ! misho 670: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
1.1 misho 671: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
672: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
1.1.1.5 ! misho 673: echo " typically \`make maintainer-clean' will remove them" >&2; \
1.1 misho 674: exit 1; \
675: else :; fi; \
676: else :; fi
677: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
678: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
679: list='$(DISTFILES)'; \
680: dist_files=`for file in $$list; do echo $$file; done | \
681: sed -e "s|^$$srcdirstrip/||;t" \
682: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
683: case $$dist_files in \
684: */*) $(MKDIR_P) `echo "$$dist_files" | \
685: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
686: sort -u` ;; \
687: esac; \
688: for file in $$dist_files; do \
689: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
690: if test -d $$d/$$file; then \
691: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
692: if test -d "$(distdir)/$$file"; then \
693: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
694: fi; \
695: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
696: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
697: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
698: fi; \
699: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
700: else \
701: test -f "$(distdir)/$$file" \
702: || cp -p $$d/$$file "$(distdir)/$$file" \
703: || exit 1; \
704: fi; \
705: done
706: $(MAKE) $(AM_MAKEFLAGS) \
707: top_distdir="$(top_distdir)" distdir="$(distdir)" \
708: dist-info
709: check-am: all-am
710: check: $(BUILT_SOURCES)
711: $(MAKE) $(AM_MAKEFLAGS) check-am
712: all-am: Makefile $(INFO_DEPS) $(MANS)
713: installdirs:
714: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
715: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
716: done
717: install: $(BUILT_SOURCES)
718: $(MAKE) $(AM_MAKEFLAGS) install-am
719: install-exec: install-exec-am
720: install-data: install-data-am
721: uninstall: uninstall-am
722:
723: install-am: all-am
724: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
725:
726: installcheck: installcheck-am
727: install-strip:
1.1.1.2 misho 728: if test -z '$(STRIP)'; then \
729: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
730: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
731: install; \
732: else \
733: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
734: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
735: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
736: fi
1.1 misho 737: mostlyclean-generic:
738:
739: clean-generic:
740:
741: distclean-generic:
742: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
743: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
744:
745: maintainer-clean-generic:
746: @echo "This command is intended for maintainers to use"
747: @echo "it deletes files that may require special tools to rebuild."
748: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
749: clean: clean-am
750:
751: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
752:
753: distclean: distclean-am
754: -rm -f Makefile
755: distclean-am: clean-am distclean-generic
756:
757: dvi: dvi-am
758:
759: dvi-am: $(DVIS)
760:
761: html: html-am
762:
763: html-am: $(HTMLS)
764:
765: info: info-am
766:
767: info-am: $(INFO_DEPS)
768:
769: install-data-am: install-info-am install-man
770:
771: install-dvi: install-dvi-am
772:
773: install-dvi-am: $(DVIS)
774: @$(NORMAL_INSTALL)
775: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
1.1.1.3 misho 776: if test -n "$$list"; then \
777: echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
778: $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
779: fi; \
1.1 misho 780: for p in $$list; do \
781: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
782: echo "$$d$$p"; \
783: done | $(am__base_list) | \
784: while read files; do \
785: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
786: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
787: done
788: install-exec-am:
789:
790: install-html: install-html-am
791:
792: install-html-am: $(HTMLS)
793: @$(NORMAL_INSTALL)
794: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
1.1.1.3 misho 795: if test -n "$$list"; then \
796: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
797: $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
798: fi; \
1.1 misho 799: for p in $$list; do \
800: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
801: $(am__strip_dir) \
1.1.1.2 misho 802: d2=$$d$$p; \
803: if test -d "$$d2"; then \
1.1 misho 804: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
805: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
1.1.1.2 misho 806: echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
807: $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
1.1 misho 808: else \
1.1.1.2 misho 809: list2="$$list2 $$d2"; \
1.1 misho 810: fi; \
811: done; \
812: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
813: while read files; do \
814: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
815: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
816: done; }
817: install-info: install-info-am
818:
819: install-info-am: $(INFO_DEPS)
820: @$(NORMAL_INSTALL)
821: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
822: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
1.1.1.3 misho 823: if test -n "$$list"; then \
824: echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
825: $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
826: fi; \
1.1 misho 827: for file in $$list; do \
828: case $$file in \
829: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
830: esac; \
831: if test -f $$file; then d=.; else d=$(srcdir); fi; \
832: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
833: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
834: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
835: if test -f $$ifile; then \
836: echo "$$ifile"; \
837: else : ; fi; \
838: done; \
839: done | $(am__base_list) | \
840: while read files; do \
841: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
842: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
843: @$(POST_INSTALL)
1.1.1.3 misho 844: @if $(am__can_run_installinfo); then \
1.1 misho 845: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
846: for file in $$list; do \
847: relfile=`echo "$$file" | sed 's|^.*/||'`; \
848: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
849: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
850: done; \
851: else : ; fi
852: install-man: install-man1 install-man8
853:
854: install-pdf: install-pdf-am
855:
856: install-pdf-am: $(PDFS)
857: @$(NORMAL_INSTALL)
858: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
1.1.1.3 misho 859: if test -n "$$list"; then \
860: echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
861: $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
862: fi; \
1.1 misho 863: for p in $$list; do \
864: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
865: echo "$$d$$p"; \
866: done | $(am__base_list) | \
867: while read files; do \
868: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
869: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
870: install-ps: install-ps-am
871:
872: install-ps-am: $(PSS)
873: @$(NORMAL_INSTALL)
874: @list='$(PSS)'; test -n "$(psdir)" || list=; \
1.1.1.3 misho 875: if test -n "$$list"; then \
876: echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
877: $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
878: fi; \
1.1 misho 879: for p in $$list; do \
880: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
881: echo "$$d$$p"; \
882: done | $(am__base_list) | \
883: while read files; do \
884: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
885: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
886: installcheck-am:
887:
888: maintainer-clean: maintainer-clean-am
889: -rm -f Makefile
890: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
891: maintainer-clean-generic maintainer-clean-vti
892:
893: mostlyclean: mostlyclean-am
894:
895: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
896: mostlyclean-libtool mostlyclean-vti
897:
898: pdf: pdf-am
899:
900: pdf-am: $(PDFS)
901:
902: ps: ps-am
903:
904: ps-am: $(PSS)
905:
906: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
907: uninstall-man uninstall-pdf-am uninstall-ps-am
908:
909: uninstall-man: uninstall-man1 uninstall-man8
910:
911: .MAKE: all check install install-am install-strip
912:
913: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
914: clean-libtool dist-info distclean distclean-generic \
915: distclean-libtool distdir dvi dvi-am html html-am info info-am \
916: install install-am install-data install-data-am install-dvi \
917: install-dvi-am install-exec install-exec-am install-html \
918: install-html-am install-info install-info-am install-man \
919: install-man1 install-man8 install-pdf install-pdf-am \
920: install-ps install-ps-am install-strip installcheck \
921: installcheck-am installdirs maintainer-clean \
922: maintainer-clean-aminfo maintainer-clean-generic \
923: maintainer-clean-vti mostlyclean mostlyclean-aminfo \
924: mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
925: pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
926: uninstall-html-am uninstall-info-am uninstall-man \
927: uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
928:
929:
930: # Have to manually specify the quagga.pdf rule in order to allow
931: # us to have a generic automatic .pdf rule to build the figure sources
932: # because it cant just work from the png's directly it seems - contrary
933: # to the documentation...
934: quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
1.1.1.5 ! misho 935: $(TEXI2PDF) -o "$@" $< || true
1.1 misho 936:
937: .png.eps:
938: $(PNGTOEPS) $< "$@"
939:
940: .png.pdf:
941: $(PNGTOPDF) $< "$@"
942:
943: .dia.png:
944: $(DIATOPNG) "$@" $<
945:
946: draft-zebra-00.txt: draft-zebra-00.ms
947: groff -T ascii -ms $< > $@
948:
949: # Tell versions [3.59,3.63) of GNU make to not export all variables.
950: # Otherwise a system limit (for SysV at least) may be exceeded.
951: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc