1: # Makefile.in generated by automake 1.11.2 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6: # Foundation, Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: target_triplet = @target@
37: subdir = doc
38: DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
39: $(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
40: $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
41: texinfo.tex
42: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
43: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
44: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
45: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
46: $(top_srcdir)/configure.ac
47: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
48: $(ACLOCAL_M4)
49: mkinstalldirs = $(install_sh) -d
50: CONFIG_HEADER = $(top_builddir)/config.h
51: CONFIG_CLEAN_FILES = defines.texi
52: CONFIG_CLEAN_VPATH_FILES =
53: SOURCES =
54: DIST_SOURCES =
55: INFO_DEPS = $(srcdir)/quagga.info
56: am__TEXINFO_TEX_DIR = $(srcdir)
57: DVIS = quagga.dvi
58: PDFS = quagga.pdf
59: PSS = quagga.ps
60: HTMLS = quagga.html
61: TEXINFOS = quagga.texi
62: TEXI2DVI = texi2dvi
63: TEXI2PDF = $(TEXI2DVI) --pdf --batch
64: MAKEINFOHTML = $(MAKEINFO) --html
65: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
66: DVIPS = dvips
67: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
68: "$(DESTDIR)$(man8dir)"
69: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
70: am__vpath_adj = case $$p in \
71: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
72: *) f=$$p;; \
73: esac;
74: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
75: am__install_max = 40
76: am__nobase_strip_setup = \
77: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
78: am__nobase_strip = \
79: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
80: am__nobase_list = $(am__nobase_strip_setup); \
81: for p in $$list; do echo "$$p $$p"; done | \
82: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
83: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
84: if (++n[$$2] == $(am__install_max)) \
85: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
86: END { for (dir in files) print dir, files[dir] }'
87: am__base_list = \
88: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
89: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
90: am__uninstall_files_from_dir = { \
91: test -z "$$files" \
92: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
93: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
94: $(am__cd) "$$dir" && rm -f $$files; }; \
95: }
96: man1dir = $(mandir)/man1
97: man8dir = $(mandir)/man8
98: NROFF = nroff
99: MANS = $(man_MANS)
100: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
101: ACLOCAL = @ACLOCAL@
102: AMTAR = @AMTAR@
103: AR = @AR@
104: AUTOCONF = @AUTOCONF@
105: AUTOHEADER = @AUTOHEADER@
106: AUTOMAKE = @AUTOMAKE@
107: AWK = @AWK@
108: BGPD = @BGPD@
109: CC = @CC@
110: CCDEPMODE = @CCDEPMODE@
111: CFLAGS = @CFLAGS@
112: CONFDATE = @CONFDATE@
113: CPP = @CPP@
114: CPPFLAGS = @CPPFLAGS@
115: CURSES = @CURSES@
116: CYGPATH_W = @CYGPATH_W@
117: DEFS = @DEFS@
118: DEPDIR = @DEPDIR@
119: DLLTOOL = @DLLTOOL@
120: DOC = @DOC@
121: DSYMUTIL = @DSYMUTIL@
122: DUMPBIN = @DUMPBIN@
123: ECHO_C = @ECHO_C@
124: ECHO_N = @ECHO_N@
125: ECHO_T = @ECHO_T@
126: EGREP = @EGREP@
127: EXEEXT = @EXEEXT@
128: FGREP = @FGREP@
129: GAWK = @GAWK@
130: GREP = @GREP@
131: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
132: IF_METHOD = @IF_METHOD@
133: IF_PROC = @IF_PROC@
134: INCLUDES = @INCLUDES@
135: INSTALL = @INSTALL@
136: INSTALL_DATA = @INSTALL_DATA@
137: INSTALL_PROGRAM = @INSTALL_PROGRAM@
138: INSTALL_SCRIPT = @INSTALL_SCRIPT@
139: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
140: IOCTL_METHOD = @IOCTL_METHOD@
141: IPFORWARD = @IPFORWARD@
142: ISISD = @ISISD@
143: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
144: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
145: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
146: KERNEL_METHOD = @KERNEL_METHOD@
147: LD = @LD@
148: LDFLAGS = @LDFLAGS@
149: LIBCAP = @LIBCAP@
150: LIBM = @LIBM@
151: LIBOBJS = @LIBOBJS@
152: LIBPAM = @LIBPAM@
153: LIBREADLINE = @LIBREADLINE@
154: LIBS = @LIBS@
155: LIBTOOL = @LIBTOOL@
156: LIB_IPV6 = @LIB_IPV6@
157: LIB_REGEX = @LIB_REGEX@
158: LIPO = @LIPO@
159: LN_S = @LN_S@
160: LTLIBOBJS = @LTLIBOBJS@
161: MAKEINFO = @MAKEINFO@
162: MANIFEST_TOOL = @MANIFEST_TOOL@
163: MKDIR_P = @MKDIR_P@
164: MULTIPATH_NUM = @MULTIPATH_NUM@
165: NM = @NM@
166: NMEDIT = @NMEDIT@
167: OBJDUMP = @OBJDUMP@
168: OBJEXT = @OBJEXT@
169: OSPF6D = @OSPF6D@
170: OSPFAPI = @OSPFAPI@
171: OSPFCLIENT = @OSPFCLIENT@
172: OSPFD = @OSPFD@
173: OTHER_METHOD = @OTHER_METHOD@
174: OTOOL = @OTOOL@
175: OTOOL64 = @OTOOL64@
176: PACKAGE = @PACKAGE@
177: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
178: PACKAGE_NAME = @PACKAGE_NAME@
179: PACKAGE_STRING = @PACKAGE_STRING@
180: PACKAGE_TARNAME = @PACKAGE_TARNAME@
181: PACKAGE_URL = @PACKAGE_URL@
182: PACKAGE_VERSION = @PACKAGE_VERSION@
183: PATH_SEPARATOR = @PATH_SEPARATOR@
184: PERL = @PERL@
185: PICFLAGS = @PICFLAGS@
186: PILDFLAGS = @PILDFLAGS@
187: RANLIB = @RANLIB@
188: RIPD = @RIPD@
189: RIPNGD = @RIPNGD@
190: RTREAD_METHOD = @RTREAD_METHOD@
191: RT_METHOD = @RT_METHOD@
192: SED = @SED@
193: SET_MAKE = @SET_MAKE@
194: SHELL = @SHELL@
195: SNMP_INCLUDES = @SNMP_INCLUDES@
196: SOLARIS = @SOLARIS@
197: STRIP = @STRIP@
198: VERSION = @VERSION@
199: VTYSH = @VTYSH@
200: WATCHQUAGGA = @WATCHQUAGGA@
201: ZEBRA = @ZEBRA@
202: abs_builddir = @abs_builddir@
203: abs_srcdir = @abs_srcdir@
204: abs_top_builddir = @abs_top_builddir@
205: abs_top_srcdir = @abs_top_srcdir@
206: ac_ct_AR = @ac_ct_AR@
207: ac_ct_CC = @ac_ct_CC@
208: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
209: am__include = @am__include@
210: am__leading_dot = @am__leading_dot@
211: am__quote = @am__quote@
212: am__tar = @am__tar@
213: am__untar = @am__untar@
214: bindir = @bindir@
215: build = @build@
216: build_alias = @build_alias@
217: build_cpu = @build_cpu@
218: build_os = @build_os@
219: build_vendor = @build_vendor@
220: builddir = @builddir@
221: datadir = @datadir@
222: datarootdir = @datarootdir@
223: docdir = @docdir@
224: dvidir = @dvidir@
225: enable_group = @enable_group@
226: enable_user = @enable_user@
227: enable_vty_group = @enable_vty_group@
228: exampledir = @exampledir@
229: exec_prefix = @exec_prefix@
230: host = @host@
231: host_alias = @host_alias@
232: host_cpu = @host_cpu@
233: host_os = @host_os@
234: host_vendor = @host_vendor@
235: htmldir = @htmldir@
236: includedir = @includedir@
237: infodir = @infodir@
238: install_sh = @install_sh@
239: libdir = @libdir@
240: libexecdir = @libexecdir@
241: localedir = @localedir@
242: localstatedir = @localstatedir@
243: mandir = @mandir@
244: mkdir_p = @mkdir_p@
245: oldincludedir = @oldincludedir@
246: pdfdir = @pdfdir@
247: pkgsrcdir = @pkgsrcdir@
248: pkgsrcrcdir = @pkgsrcrcdir@
249: prefix = @prefix@
250: program_transform_name = @program_transform_name@
251: psdir = @psdir@
252: quagga_statedir = @quagga_statedir@
253: sbindir = @sbindir@
254: sharedstatedir = @sharedstatedir@
255: srcdir = @srcdir@
256: sysconfdir = @sysconfdir@
257: target = @target@
258: target_alias = @target_alias@
259: target_cpu = @target_cpu@
260: target_os = @target_os@
261: target_vendor = @target_vendor@
262: top_build_prefix = @top_build_prefix@
263: top_builddir = @top_builddir@
264: top_srcdir = @top_srcdir@
265:
266: # Dia, the version i have at least, doesn't do very good EPS output
267: # (some of the text is scaled strangely). So this will work, but
268: # it is probably better to use something like gimp to convert the
269: # dia exported PNG files to EPS manually.
270: #
271: # Here we use 'convert' from the well known 'ImageMagick' package
272: # to do conversion from png to eps/pdf for figures.
273: # PDF form is required for quagga.pdf, using PDFTex at least.
274: #
275: # TeX implementation, which we depend on already anyway.
276: #
277: # dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
278: SUFFIXES = .png .eps .dia .pdf
279: DIATOPNG = dia -t png -e
280: DIATOEPS = dia -t eps -e
281: PNGTOEPS = convert -antialias -contrast -despeckle
282: PNGTOPDF = $(PNGTOEPS)
283: EPSTOPDF = epstopdf
284:
285: # The figure sources
286: figures_names_parts = -normal-processing -rs-processing \
287: _topologies_full _topologies_rs
288:
289: figures_sources = $(figures_names_parts:%=fig%.dia)
290: figures_png = $(figures_names_parts:%=fig%.png)
291: figures_pdf = $(figures_names_parts:%=fig%.pdf)
292: figures_eps = $(figures_names_parts:%=fig%.eps)
293: figures_txt = $(figures_names_parts:%=fig%.txt)
294:
295: # rather twisted logic because we have to build PDFs of the EPS figures for
296: # PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
297: # cant rely on a single automatic rule for *.pdf, eg the one automatically
298: # provided by automake. If you are an automake wizard, please feel free to
299: # compact it somehow.
300:
301: # Built from defines.texi.in
302: BUILT_SOURCES = defines.texi
303: info_TEXINFOS = quagga.texi
304: quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi install.texi \
305: ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi overview.texi \
306: protocol.texi ripd.texi ripngd.texi routemap.texi snmp.texi \
307: vtysh.texi routeserver.texi defines.texi $(figures_png) snmptrap.texi \
308: $(figures_txt)
309:
310: man_MANS = vtysh.1 bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8 isisd.8
311: EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt $(man_MANS) \
312: mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
313: mpls/opaque_lsa.txt mpls/ospfd.conf \
314: $(figures_sources) $(figures_png) $(figures_txt)
315:
316: all: $(BUILT_SOURCES)
317: $(MAKE) $(AM_MAKEFLAGS) all-am
318:
319: .SUFFIXES:
320: .SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
321: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
322: @for dep in $?; do \
323: case '$(am__configure_deps)' in \
324: *$$dep*) \
325: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
326: && { if test -f $@; then exit 0; else break; fi; }; \
327: exit 1;; \
328: esac; \
329: done; \
330: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
331: $(am__cd) $(top_srcdir) && \
332: $(AUTOMAKE) --gnu doc/Makefile
333: .PRECIOUS: Makefile
334: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
335: @case '$?' in \
336: *config.status*) \
337: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
338: *) \
339: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
340: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
341: esac;
342:
343: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
344: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
345:
346: $(top_srcdir)/configure: $(am__configure_deps)
347: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
348: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
349: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
350: $(am__aclocal_m4_deps):
351: defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
352: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
353:
354: mostlyclean-libtool:
355: -rm -f *.lo
356:
357: clean-libtool:
358: -rm -rf .libs _libs
359:
360: .texi.info:
361: restore=: && backupdir="$(am__leading_dot)am$$$$" && \
362: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
363: rm -rf $$backupdir && mkdir $$backupdir && \
364: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
365: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
366: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
367: done; \
368: else :; fi && \
369: cd "$$am__cwd"; \
370: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
371: -o $@ $<; \
372: then \
373: rc=0; \
374: $(am__cd) $(srcdir); \
375: else \
376: rc=$$?; \
377: $(am__cd) $(srcdir) && \
378: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
379: fi; \
380: rm -rf $$backupdir; exit $$rc
381:
382: .texi.dvi:
383: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
384: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
385: $(TEXI2DVI) $<
386:
387: .texi.pdf:
388: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
389: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
390: $(TEXI2PDF) $<
391:
392: .texi.html:
393: rm -rf $(@:.html=.htp)
394: if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
395: -o $(@:.html=.htp) $<; \
396: then \
397: rm -rf $@; \
398: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
399: mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
400: else \
401: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
402: rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
403: exit 1; \
404: fi
405: $(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
406: quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
407: quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
408: $(srcdir)/version.texi: $(srcdir)/stamp-vti
409: $(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
410: @(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
411: set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
412: echo "@set UPDATED $$1 $$2 $$3"; \
413: echo "@set UPDATED-MONTH $$2 $$3"; \
414: echo "@set EDITION $(VERSION)"; \
415: echo "@set VERSION $(VERSION)") > vti.tmp
416: @cmp -s vti.tmp $(srcdir)/version.texi \
417: || (echo "Updating $(srcdir)/version.texi"; \
418: cp vti.tmp $(srcdir)/version.texi)
419: -@rm -f vti.tmp
420: @cp $(srcdir)/version.texi $@
421:
422: mostlyclean-vti:
423: -rm -f vti.tmp
424:
425: maintainer-clean-vti:
426: -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
427: .dvi.ps:
428: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
429: $(DVIPS) -o $@ $<
430:
431: uninstall-dvi-am:
432: @$(NORMAL_UNINSTALL)
433: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
434: for p in $$list; do \
435: $(am__strip_dir) \
436: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
437: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
438: done
439:
440: uninstall-html-am:
441: @$(NORMAL_UNINSTALL)
442: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
443: for p in $$list; do \
444: $(am__strip_dir) \
445: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
446: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
447: done
448:
449: uninstall-info-am:
450: @$(PRE_UNINSTALL)
451: @if test -d '$(DESTDIR)$(infodir)' && \
452: (install-info --version && \
453: install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
454: list='$(INFO_DEPS)'; \
455: for file in $$list; do \
456: relfile=`echo "$$file" | sed 's|^.*/||'`; \
457: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
458: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
459: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
460: done; \
461: else :; fi
462: @$(NORMAL_UNINSTALL)
463: @list='$(INFO_DEPS)'; \
464: for file in $$list; do \
465: relfile=`echo "$$file" | sed 's|^.*/||'`; \
466: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
467: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
468: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
469: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
470: else :; fi); \
471: done
472:
473: uninstall-pdf-am:
474: @$(NORMAL_UNINSTALL)
475: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
476: for p in $$list; do \
477: $(am__strip_dir) \
478: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
479: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
480: done
481:
482: uninstall-ps-am:
483: @$(NORMAL_UNINSTALL)
484: @list='$(PSS)'; test -n "$(psdir)" || list=; \
485: for p in $$list; do \
486: $(am__strip_dir) \
487: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
488: rm -f "$(DESTDIR)$(psdir)/$$f"; \
489: done
490:
491: dist-info: $(INFO_DEPS)
492: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
493: list='$(INFO_DEPS)'; \
494: for base in $$list; do \
495: case $$base in \
496: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
497: esac; \
498: if test -f $$base; then d=.; else d=$(srcdir); fi; \
499: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
500: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
501: if test -f $$file; then \
502: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
503: test -f "$(distdir)/$$relfile" || \
504: cp -p $$file "$(distdir)/$$relfile"; \
505: else :; fi; \
506: done; \
507: done
508:
509: mostlyclean-aminfo:
510: -rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
511: quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
512: quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
513:
514: clean-aminfo:
515: -test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
516: || rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
517:
518: maintainer-clean-aminfo:
519: @list='$(INFO_DEPS)'; for i in $$list; do \
520: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
521: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
522: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
523: done
524: install-man1: $(man_MANS)
525: @$(NORMAL_INSTALL)
526: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
527: @list=''; test -n "$(man1dir)" || exit 0; \
528: { for i in $$list; do echo "$$i"; done; \
529: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
530: sed -n '/\.1[a-z]*$$/p'; \
531: } | while read p; do \
532: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
533: echo "$$d$$p"; echo "$$p"; \
534: done | \
535: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
536: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
537: sed 'N;N;s,\n, ,g' | { \
538: list=; while read file base inst; do \
539: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
540: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
541: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
542: fi; \
543: done; \
544: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
545: while read files; do \
546: test -z "$$files" || { \
547: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
548: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
549: done; }
550:
551: uninstall-man1:
552: @$(NORMAL_UNINSTALL)
553: @list=''; test -n "$(man1dir)" || exit 0; \
554: files=`{ for i in $$list; do echo "$$i"; done; \
555: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
556: sed -n '/\.1[a-z]*$$/p'; \
557: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
558: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
559: dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
560: install-man8: $(man_MANS)
561: @$(NORMAL_INSTALL)
562: test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
563: @list=''; test -n "$(man8dir)" || exit 0; \
564: { for i in $$list; do echo "$$i"; done; \
565: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
566: sed -n '/\.8[a-z]*$$/p'; \
567: } | while read p; do \
568: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
569: echo "$$d$$p"; echo "$$p"; \
570: done | \
571: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
572: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
573: sed 'N;N;s,\n, ,g' | { \
574: list=; while read file base inst; do \
575: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
576: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
577: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
578: fi; \
579: done; \
580: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
581: while read files; do \
582: test -z "$$files" || { \
583: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
584: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
585: done; }
586:
587: uninstall-man8:
588: @$(NORMAL_UNINSTALL)
589: @list=''; test -n "$(man8dir)" || exit 0; \
590: files=`{ for i in $$list; do echo "$$i"; done; \
591: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
592: sed -n '/\.8[a-z]*$$/p'; \
593: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
594: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
595: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
596: tags: TAGS
597: TAGS:
598:
599: ctags: CTAGS
600: CTAGS:
601:
602:
603: distdir: $(DISTFILES)
604: @list='$(MANS)'; if test -n "$$list"; then \
605: list=`for p in $$list; do \
606: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
607: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
608: if test -n "$$list" && \
609: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
610: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
611: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
612: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
613: echo " typically \`make maintainer-clean' will remove them" >&2; \
614: exit 1; \
615: else :; fi; \
616: else :; fi
617: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
618: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
619: list='$(DISTFILES)'; \
620: dist_files=`for file in $$list; do echo $$file; done | \
621: sed -e "s|^$$srcdirstrip/||;t" \
622: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
623: case $$dist_files in \
624: */*) $(MKDIR_P) `echo "$$dist_files" | \
625: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
626: sort -u` ;; \
627: esac; \
628: for file in $$dist_files; do \
629: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
630: if test -d $$d/$$file; then \
631: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
632: if test -d "$(distdir)/$$file"; then \
633: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
634: fi; \
635: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
636: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
637: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
638: fi; \
639: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
640: else \
641: test -f "$(distdir)/$$file" \
642: || cp -p $$d/$$file "$(distdir)/$$file" \
643: || exit 1; \
644: fi; \
645: done
646: $(MAKE) $(AM_MAKEFLAGS) \
647: top_distdir="$(top_distdir)" distdir="$(distdir)" \
648: dist-info
649: check-am: all-am
650: check: $(BUILT_SOURCES)
651: $(MAKE) $(AM_MAKEFLAGS) check-am
652: all-am: Makefile $(INFO_DEPS) $(MANS)
653: installdirs:
654: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
655: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
656: done
657: install: $(BUILT_SOURCES)
658: $(MAKE) $(AM_MAKEFLAGS) install-am
659: install-exec: install-exec-am
660: install-data: install-data-am
661: uninstall: uninstall-am
662:
663: install-am: all-am
664: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
665:
666: installcheck: installcheck-am
667: install-strip:
668: if test -z '$(STRIP)'; then \
669: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
670: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
671: install; \
672: else \
673: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
674: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
675: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
676: fi
677: mostlyclean-generic:
678:
679: clean-generic:
680:
681: distclean-generic:
682: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
683: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
684:
685: maintainer-clean-generic:
686: @echo "This command is intended for maintainers to use"
687: @echo "it deletes files that may require special tools to rebuild."
688: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
689: clean: clean-am
690:
691: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
692:
693: distclean: distclean-am
694: -rm -f Makefile
695: distclean-am: clean-am distclean-generic
696:
697: dvi: dvi-am
698:
699: dvi-am: $(DVIS)
700:
701: html: html-am
702:
703: html-am: $(HTMLS)
704:
705: info: info-am
706:
707: info-am: $(INFO_DEPS)
708:
709: install-data-am: install-info-am install-man
710:
711: install-dvi: install-dvi-am
712:
713: install-dvi-am: $(DVIS)
714: @$(NORMAL_INSTALL)
715: test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
716: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
717: for p in $$list; do \
718: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
719: echo "$$d$$p"; \
720: done | $(am__base_list) | \
721: while read files; do \
722: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
723: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
724: done
725: install-exec-am:
726:
727: install-html: install-html-am
728:
729: install-html-am: $(HTMLS)
730: @$(NORMAL_INSTALL)
731: test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
732: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
733: for p in $$list; do \
734: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
735: $(am__strip_dir) \
736: d2=$$d$$p; \
737: if test -d "$$d2"; then \
738: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
739: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
740: echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
741: $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
742: else \
743: list2="$$list2 $$d2"; \
744: fi; \
745: done; \
746: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
747: while read files; do \
748: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
749: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
750: done; }
751: install-info: install-info-am
752:
753: install-info-am: $(INFO_DEPS)
754: @$(NORMAL_INSTALL)
755: test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
756: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
757: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
758: for file in $$list; do \
759: case $$file in \
760: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
761: esac; \
762: if test -f $$file; then d=.; else d=$(srcdir); fi; \
763: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
764: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
765: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
766: if test -f $$ifile; then \
767: echo "$$ifile"; \
768: else : ; fi; \
769: done; \
770: done | $(am__base_list) | \
771: while read files; do \
772: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
773: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
774: @$(POST_INSTALL)
775: @am__run_installinfo=yes; \
776: case $$AM_UPDATE_INFO_DIR in \
777: n|no|NO) am__run_installinfo=no;; \
778: *) (install-info --version) >/dev/null 2>&1 \
779: || am__run_installinfo=no;; \
780: esac; \
781: if test $$am__run_installinfo = yes; then \
782: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
783: for file in $$list; do \
784: relfile=`echo "$$file" | sed 's|^.*/||'`; \
785: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
786: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
787: done; \
788: else : ; fi
789: install-man: install-man1 install-man8
790:
791: install-pdf: install-pdf-am
792:
793: install-pdf-am: $(PDFS)
794: @$(NORMAL_INSTALL)
795: test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
796: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
797: for p in $$list; do \
798: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
799: echo "$$d$$p"; \
800: done | $(am__base_list) | \
801: while read files; do \
802: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
803: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
804: install-ps: install-ps-am
805:
806: install-ps-am: $(PSS)
807: @$(NORMAL_INSTALL)
808: test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
809: @list='$(PSS)'; test -n "$(psdir)" || list=; \
810: for p in $$list; do \
811: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
812: echo "$$d$$p"; \
813: done | $(am__base_list) | \
814: while read files; do \
815: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
816: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
817: installcheck-am:
818:
819: maintainer-clean: maintainer-clean-am
820: -rm -f Makefile
821: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
822: maintainer-clean-generic maintainer-clean-vti
823:
824: mostlyclean: mostlyclean-am
825:
826: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
827: mostlyclean-libtool mostlyclean-vti
828:
829: pdf: pdf-am
830:
831: pdf-am: $(PDFS)
832:
833: ps: ps-am
834:
835: ps-am: $(PSS)
836:
837: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
838: uninstall-man uninstall-pdf-am uninstall-ps-am
839:
840: uninstall-man: uninstall-man1 uninstall-man8
841:
842: .MAKE: all check install install-am install-strip
843:
844: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
845: clean-libtool dist-info distclean distclean-generic \
846: distclean-libtool distdir dvi dvi-am html html-am info info-am \
847: install install-am install-data install-data-am install-dvi \
848: install-dvi-am install-exec install-exec-am install-html \
849: install-html-am install-info install-info-am install-man \
850: install-man1 install-man8 install-pdf install-pdf-am \
851: install-ps install-ps-am install-strip installcheck \
852: installcheck-am installdirs maintainer-clean \
853: maintainer-clean-aminfo maintainer-clean-generic \
854: maintainer-clean-vti mostlyclean mostlyclean-aminfo \
855: mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
856: pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
857: uninstall-html-am uninstall-info-am uninstall-man \
858: uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
859:
860:
861: # Have to manually specify the quagga.pdf rule in order to allow
862: # us to have a generic automatic .pdf rule to build the figure sources
863: # because it cant just work from the png's directly it seems - contrary
864: # to the documentation...
865: quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
866: $(TEXI2PDF) -o "$@" $<
867:
868: .png.eps:
869: $(PNGTOEPS) $< "$@"
870:
871: .png.pdf:
872: $(PNGTOPDF) $< "$@"
873:
874: .dia.png:
875: $(DIATOPNG) "$@" $<
876:
877: draft-zebra-00.txt: draft-zebra-00.ms
878: groff -T ascii -ms $< > $@
879:
880: # Tell versions [3.59,3.63) of GNU make to not export all variables.
881: # Otherwise a system limit (for SysV at least) may be exceeded.
882: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc