1: # Makefile.in generated by automake 1.11.5 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6: # Foundation, Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: am__make_dryrun = \
19: { \
20: am__dry=no; \
21: case $$MAKEFLAGS in \
22: *\\[\ \ ]*) \
23: echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
24: | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
25: *) \
26: for am__flg in $$MAKEFLAGS; do \
27: case $$am__flg in \
28: *=*|--*) ;; \
29: *n*) am__dry=yes; break;; \
30: esac; \
31: done;; \
32: esac; \
33: test $$am__dry = yes; \
34: }
35: pkgdatadir = $(datadir)/@PACKAGE@
36: pkgincludedir = $(includedir)/@PACKAGE@
37: pkglibdir = $(libdir)/@PACKAGE@
38: pkglibexecdir = $(libexecdir)/@PACKAGE@
39: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
40: install_sh_DATA = $(install_sh) -c -m 644
41: install_sh_PROGRAM = $(install_sh) -c
42: install_sh_SCRIPT = $(install_sh) -c
43: INSTALL_HEADER = $(INSTALL_DATA)
44: transform = $(program_transform_name)
45: NORMAL_INSTALL = :
46: PRE_INSTALL = :
47: POST_INSTALL = :
48: NORMAL_UNINSTALL = :
49: PRE_UNINSTALL = :
50: POST_UNINSTALL = :
51: build_triplet = @build@
52: host_triplet = @host@
53: target_triplet = @target@
54: @BGPD_TRUE@am__append_1 = bgpd.8
55: @ISISD_TRUE@am__append_2 = isisd.8
56: @OSPF6D_TRUE@am__append_3 = ospf6d.8
57: @OSPFCLIENT_TRUE@am__append_4 = ospfclient.8
58: @OSPFD_TRUE@am__append_5 = ospfd.8
59: @RIPD_TRUE@am__append_6 = ripd.8
60: @RIPNGD_TRUE@am__append_7 = ripngd.8
61: @VTYSH_TRUE@am__append_8 = vtysh.1
62: @WATCHQUAGGA_TRUE@am__append_9 = watchquagga.8
63: @ZEBRA_TRUE@am__append_10 = zebra.8
64: subdir = doc
65: DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
66: $(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
67: $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
68: texinfo.tex
69: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
70: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
71: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
72: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
73: $(top_srcdir)/configure.ac
74: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
75: $(ACLOCAL_M4)
76: mkinstalldirs = $(install_sh) -d
77: CONFIG_HEADER = $(top_builddir)/config.h
78: CONFIG_CLEAN_FILES = defines.texi
79: CONFIG_CLEAN_VPATH_FILES =
80: SOURCES =
81: DIST_SOURCES =
82: INFO_DEPS = $(srcdir)/quagga.info
83: am__TEXINFO_TEX_DIR = $(srcdir)
84: DVIS = quagga.dvi
85: PDFS = quagga.pdf
86: PSS = quagga.ps
87: HTMLS = quagga.html
88: TEXINFOS = quagga.texi
89: TEXI2DVI = texi2dvi
90: TEXI2PDF = $(TEXI2DVI) --pdf --batch
91: MAKEINFOHTML = $(MAKEINFO) --html
92: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
93: DVIPS = dvips
94: am__can_run_installinfo = \
95: case $$AM_UPDATE_INFO_DIR in \
96: n|no|NO) false;; \
97: *) (install-info --version) >/dev/null 2>&1;; \
98: esac
99: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
100: "$(DESTDIR)$(man8dir)"
101: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
102: am__vpath_adj = case $$p in \
103: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
104: *) f=$$p;; \
105: esac;
106: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
107: am__install_max = 40
108: am__nobase_strip_setup = \
109: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
110: am__nobase_strip = \
111: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
112: am__nobase_list = $(am__nobase_strip_setup); \
113: for p in $$list; do echo "$$p $$p"; done | \
114: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
115: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
116: if (++n[$$2] == $(am__install_max)) \
117: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
118: END { for (dir in files) print dir, files[dir] }'
119: am__base_list = \
120: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
121: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
122: am__uninstall_files_from_dir = { \
123: test -z "$$files" \
124: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
125: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
126: $(am__cd) "$$dir" && rm -f $$files; }; \
127: }
128: man1dir = $(mandir)/man1
129: man8dir = $(mandir)/man8
130: NROFF = nroff
131: MANS = $(man_MANS)
132: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
133: ACLOCAL = @ACLOCAL@
134: AMTAR = @AMTAR@
135: AR = @AR@
136: AUTOCONF = @AUTOCONF@
137: AUTOHEADER = @AUTOHEADER@
138: AUTOMAKE = @AUTOMAKE@
139: AWK = @AWK@
140: BABELD = @BABELD@
141: BGPD = @BGPD@
142: CC = @CC@
143: CCDEPMODE = @CCDEPMODE@
144: CFLAGS = @CFLAGS@
145: CONFDATE = @CONFDATE@
146: CPP = @CPP@
147: CPPFLAGS = @CPPFLAGS@
148: CURSES = @CURSES@
149: CYGPATH_W = @CYGPATH_W@
150: DEFS = @DEFS@
151: DEPDIR = @DEPDIR@
152: DLLTOOL = @DLLTOOL@
153: DOC = @DOC@
154: DSYMUTIL = @DSYMUTIL@
155: DUMPBIN = @DUMPBIN@
156: ECHO_C = @ECHO_C@
157: ECHO_N = @ECHO_N@
158: ECHO_T = @ECHO_T@
159: EGREP = @EGREP@
160: EXEEXT = @EXEEXT@
161: FGREP = @FGREP@
162: GAWK = @GAWK@
163: GREP = @GREP@
164: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
165: IF_METHOD = @IF_METHOD@
166: IF_PROC = @IF_PROC@
167: INCLUDES = @INCLUDES@
168: INSTALL = @INSTALL@
169: INSTALL_DATA = @INSTALL_DATA@
170: INSTALL_PROGRAM = @INSTALL_PROGRAM@
171: INSTALL_SCRIPT = @INSTALL_SCRIPT@
172: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
173: IOCTL_METHOD = @IOCTL_METHOD@
174: IPFORWARD = @IPFORWARD@
175: ISISD = @ISISD@
176: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
177: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
178: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
179: KERNEL_METHOD = @KERNEL_METHOD@
180: LATEXMK = @LATEXMK@
181: LD = @LD@
182: LDFLAGS = @LDFLAGS@
183: LIBCAP = @LIBCAP@
184: LIBM = @LIBM@
185: LIBOBJS = @LIBOBJS@
186: LIBPAM = @LIBPAM@
187: LIBREADLINE = @LIBREADLINE@
188: LIBS = @LIBS@
189: LIBTOOL = @LIBTOOL@
190: LIB_IPV6 = @LIB_IPV6@
191: LIB_REGEX = @LIB_REGEX@
192: LIPO = @LIPO@
193: LN_S = @LN_S@
194: LTLIBOBJS = @LTLIBOBJS@
195: MAKEINFO = @MAKEINFO@
196: MANIFEST_TOOL = @MANIFEST_TOOL@
197: MKDIR_P = @MKDIR_P@
198: MULTIPATH_NUM = @MULTIPATH_NUM@
199: NM = @NM@
200: NMEDIT = @NMEDIT@
201: OBJDUMP = @OBJDUMP@
202: OBJEXT = @OBJEXT@
203: OSPF6D = @OSPF6D@
204: OSPFAPI = @OSPFAPI@
205: OSPFCLIENT = @OSPFCLIENT@
206: OSPFD = @OSPFD@
207: OTHER_METHOD = @OTHER_METHOD@
208: OTOOL = @OTOOL@
209: OTOOL64 = @OTOOL64@
210: PACKAGE = @PACKAGE@
211: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
212: PACKAGE_NAME = @PACKAGE_NAME@
213: PACKAGE_STRING = @PACKAGE_STRING@
214: PACKAGE_TARNAME = @PACKAGE_TARNAME@
215: PACKAGE_URL = @PACKAGE_URL@
216: PACKAGE_VERSION = @PACKAGE_VERSION@
217: PATH_SEPARATOR = @PATH_SEPARATOR@
218: PDFLATEX = @PDFLATEX@
219: PERL = @PERL@
220: PICFLAGS = @PICFLAGS@
221: PILDFLAGS = @PILDFLAGS@
222: RANLIB = @RANLIB@
223: RIPD = @RIPD@
224: RIPNGD = @RIPNGD@
225: RTREAD_METHOD = @RTREAD_METHOD@
226: RT_METHOD = @RT_METHOD@
227: SED = @SED@
228: SET_MAKE = @SET_MAKE@
229: SHELL = @SHELL@
230: SNMP_INCLUDES = @SNMP_INCLUDES@
231: SOLARIS = @SOLARIS@
232: STRIP = @STRIP@
233: VERSION = @VERSION@
234: VTYSH = @VTYSH@
235: WATCHQUAGGA = @WATCHQUAGGA@
236: ZEBRA = @ZEBRA@
237: abs_builddir = @abs_builddir@
238: abs_srcdir = @abs_srcdir@
239: abs_top_builddir = @abs_top_builddir@
240: abs_top_srcdir = @abs_top_srcdir@
241: ac_ct_AR = @ac_ct_AR@
242: ac_ct_CC = @ac_ct_CC@
243: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
244: am__include = @am__include@
245: am__leading_dot = @am__leading_dot@
246: am__quote = @am__quote@
247: am__tar = @am__tar@
248: am__untar = @am__untar@
249: bindir = @bindir@
250: build = @build@
251: build_alias = @build_alias@
252: build_cpu = @build_cpu@
253: build_os = @build_os@
254: build_vendor = @build_vendor@
255: builddir = @builddir@
256: datadir = @datadir@
257: datarootdir = @datarootdir@
258: docdir = @docdir@
259: dvidir = @dvidir@
260: enable_group = @enable_group@
261: enable_user = @enable_user@
262: enable_vty_group = @enable_vty_group@
263: exampledir = @exampledir@
264: exec_prefix = @exec_prefix@
265: host = @host@
266: host_alias = @host_alias@
267: host_cpu = @host_cpu@
268: host_os = @host_os@
269: host_vendor = @host_vendor@
270: htmldir = @htmldir@
271: includedir = @includedir@
272: infodir = @infodir@
273: install_sh = @install_sh@
274: libdir = @libdir@
275: libexecdir = @libexecdir@
276: localedir = @localedir@
277: localstatedir = @localstatedir@
278: mandir = @mandir@
279: mkdir_p = @mkdir_p@
280: oldincludedir = @oldincludedir@
281: pdfdir = @pdfdir@
282: pkgsrcdir = @pkgsrcdir@
283: pkgsrcrcdir = @pkgsrcrcdir@
284: prefix = @prefix@
285: program_transform_name = @program_transform_name@
286: psdir = @psdir@
287: quagga_statedir = @quagga_statedir@
288: sbindir = @sbindir@
289: sharedstatedir = @sharedstatedir@
290: srcdir = @srcdir@
291: sysconfdir = @sysconfdir@
292: target = @target@
293: target_alias = @target_alias@
294: target_cpu = @target_cpu@
295: target_os = @target_os@
296: target_vendor = @target_vendor@
297: top_build_prefix = @top_build_prefix@
298: top_builddir = @top_builddir@
299: top_srcdir = @top_srcdir@
300:
301: # Dia, the version i have at least, doesn't do very good EPS output
302: # (some of the text is scaled strangely). So this will work, but
303: # it is probably better to use something like gimp to convert the
304: # dia exported PNG files to EPS manually.
305: #
306: # Here we use 'convert' from the well known 'ImageMagick' package
307: # to do conversion from png to eps/pdf for figures.
308: # PDF form is required for quagga.pdf, using PDFTex at least.
309: #
310: # TeX implementation, which we depend on already anyway.
311: #
312: # dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
313: SUFFIXES = .png .eps .dia .pdf
314: DIATOPNG = dia -t png -e
315: DIATOEPS = dia -t eps -e
316: PNGTOEPS = convert -antialias -contrast -despeckle
317: PNGTOPDF = $(PNGTOEPS)
318: EPSTOPDF = epstopdf
319:
320: # The figure sources
321: figures_names_parts = -normal-processing -rs-processing \
322: _topologies_full _topologies_rs
323:
324: figures_sources = $(figures_names_parts:%=fig%.dia)
325: figures_png = $(figures_names_parts:%=fig%.png)
326: figures_pdf = $(figures_names_parts:%=fig%.pdf)
327: figures_eps = $(figures_names_parts:%=fig%.eps)
328: figures_txt = $(figures_names_parts:%=fig%.txt)
329:
330: # rather twisted logic because we have to build PDFs of the EPS figures for
331: # PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
332: # cant rely on a single automatic rule for *.pdf, eg the one automatically
333: # provided by automake. If you are an automake wizard, please feel free to
334: # compact it somehow.
335:
336: # Built from defines.texi.in
337: BUILT_SOURCES = defines.texi
338: info_TEXINFOS = quagga.texi
339: quagga_TEXINFOS = appendix.texi babeld.texi basic.texi bgpd.texi filter.texi \
340: install.texi ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi \
341: overview.texi protocol.texi ripd.texi ripngd.texi routemap.texi \
342: snmp.texi vtysh.texi routeserver.texi defines.texi $(figures_png) \
343: snmptrap.texi $(figures_txt)
344:
345: man_MANS = $(am__append_1) $(am__append_2) $(am__append_3) \
346: $(am__append_4) $(am__append_5) $(am__append_6) \
347: $(am__append_7) $(am__append_8) $(am__append_9) \
348: $(am__append_10)
349: EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt \
350: bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ripd.8 \
351: ripngd.8 vtysh.1 watchquagga.8 zebra.8 \
352: mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
353: mpls/opaque_lsa.txt mpls/ospfd.conf \
354: $(figures_sources) $(figures_png) $(figures_txt)
355:
356: all: $(BUILT_SOURCES)
357: $(MAKE) $(AM_MAKEFLAGS) all-am
358:
359: .SUFFIXES:
360: .SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
361: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
362: @for dep in $?; do \
363: case '$(am__configure_deps)' in \
364: *$$dep*) \
365: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
366: && { if test -f $@; then exit 0; else break; fi; }; \
367: exit 1;; \
368: esac; \
369: done; \
370: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
371: $(am__cd) $(top_srcdir) && \
372: $(AUTOMAKE) --gnu doc/Makefile
373: .PRECIOUS: Makefile
374: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
375: @case '$?' in \
376: *config.status*) \
377: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
378: *) \
379: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
380: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
381: esac;
382:
383: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
384: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
385:
386: $(top_srcdir)/configure: $(am__configure_deps)
387: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
388: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
389: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
390: $(am__aclocal_m4_deps):
391: defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
392: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
393:
394: mostlyclean-libtool:
395: -rm -f *.lo
396:
397: clean-libtool:
398: -rm -rf .libs _libs
399:
400: .texi.info:
401: restore=: && backupdir="$(am__leading_dot)am$$$$" && \
402: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
403: rm -rf $$backupdir && mkdir $$backupdir && \
404: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
405: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
406: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
407: done; \
408: else :; fi && \
409: cd "$$am__cwd"; \
410: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
411: -o $@ $<; \
412: then \
413: rc=0; \
414: $(am__cd) $(srcdir); \
415: else \
416: rc=$$?; \
417: $(am__cd) $(srcdir) && \
418: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
419: fi; \
420: rm -rf $$backupdir; exit $$rc
421:
422: .texi.dvi:
423: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
424: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
425: $(TEXI2DVI) $<
426:
427: .texi.pdf:
428: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
429: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
430: $(TEXI2PDF) $<
431:
432: .texi.html:
433: rm -rf $(@:.html=.htp)
434: if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
435: -o $(@:.html=.htp) $<; \
436: then \
437: rm -rf $@; \
438: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
439: mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
440: else \
441: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
442: rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
443: exit 1; \
444: fi
445: $(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
446: quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
447: quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
448: $(srcdir)/version.texi: $(srcdir)/stamp-vti
449: $(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
450: @(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
451: set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
452: echo "@set UPDATED $$1 $$2 $$3"; \
453: echo "@set UPDATED-MONTH $$2 $$3"; \
454: echo "@set EDITION $(VERSION)"; \
455: echo "@set VERSION $(VERSION)") > vti.tmp
456: @cmp -s vti.tmp $(srcdir)/version.texi \
457: || (echo "Updating $(srcdir)/version.texi"; \
458: cp vti.tmp $(srcdir)/version.texi)
459: -@rm -f vti.tmp
460: @cp $(srcdir)/version.texi $@
461:
462: mostlyclean-vti:
463: -rm -f vti.tmp
464:
465: maintainer-clean-vti:
466: -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
467: .dvi.ps:
468: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
469: $(DVIPS) -o $@ $<
470:
471: uninstall-dvi-am:
472: @$(NORMAL_UNINSTALL)
473: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
474: for p in $$list; do \
475: $(am__strip_dir) \
476: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
477: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
478: done
479:
480: uninstall-html-am:
481: @$(NORMAL_UNINSTALL)
482: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
483: for p in $$list; do \
484: $(am__strip_dir) \
485: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
486: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
487: done
488:
489: uninstall-info-am:
490: @$(PRE_UNINSTALL)
491: @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
492: list='$(INFO_DEPS)'; \
493: for file in $$list; do \
494: relfile=`echo "$$file" | sed 's|^.*/||'`; \
495: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
496: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
497: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
498: done; \
499: else :; fi
500: @$(NORMAL_UNINSTALL)
501: @list='$(INFO_DEPS)'; \
502: for file in $$list; do \
503: relfile=`echo "$$file" | sed 's|^.*/||'`; \
504: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
505: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
506: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
507: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
508: else :; fi); \
509: done
510:
511: uninstall-pdf-am:
512: @$(NORMAL_UNINSTALL)
513: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
514: for p in $$list; do \
515: $(am__strip_dir) \
516: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
517: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
518: done
519:
520: uninstall-ps-am:
521: @$(NORMAL_UNINSTALL)
522: @list='$(PSS)'; test -n "$(psdir)" || list=; \
523: for p in $$list; do \
524: $(am__strip_dir) \
525: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
526: rm -f "$(DESTDIR)$(psdir)/$$f"; \
527: done
528:
529: dist-info: $(INFO_DEPS)
530: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
531: list='$(INFO_DEPS)'; \
532: for base in $$list; do \
533: case $$base in \
534: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
535: esac; \
536: if test -f $$base; then d=.; else d=$(srcdir); fi; \
537: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
538: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
539: if test -f $$file; then \
540: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
541: test -f "$(distdir)/$$relfile" || \
542: cp -p $$file "$(distdir)/$$relfile"; \
543: else :; fi; \
544: done; \
545: done
546:
547: mostlyclean-aminfo:
548: -rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
549: quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
550: quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
551:
552: clean-aminfo:
553: -test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
554: || rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
555:
556: maintainer-clean-aminfo:
557: @list='$(INFO_DEPS)'; for i in $$list; do \
558: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
559: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
560: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
561: done
562: install-man1: $(man_MANS)
563: @$(NORMAL_INSTALL)
564: @list1=''; \
565: list2='$(man_MANS)'; \
566: test -n "$(man1dir)" \
567: && test -n "`echo $$list1$$list2`" \
568: || exit 0; \
569: echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
570: $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
571: { for i in $$list1; do echo "$$i"; done; \
572: if test -n "$$list2"; then \
573: for i in $$list2; do echo "$$i"; done \
574: | sed -n '/\.1[a-z]*$$/p'; \
575: fi; \
576: } | while read p; do \
577: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
578: echo "$$d$$p"; echo "$$p"; \
579: done | \
580: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
581: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
582: sed 'N;N;s,\n, ,g' | { \
583: list=; while read file base inst; do \
584: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
585: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
586: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
587: fi; \
588: done; \
589: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
590: while read files; do \
591: test -z "$$files" || { \
592: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
593: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
594: done; }
595:
596: uninstall-man1:
597: @$(NORMAL_UNINSTALL)
598: @list=''; test -n "$(man1dir)" || exit 0; \
599: files=`{ for i in $$list; do echo "$$i"; done; \
600: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
601: sed -n '/\.1[a-z]*$$/p'; \
602: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
603: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
604: dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
605: install-man8: $(man_MANS)
606: @$(NORMAL_INSTALL)
607: @list1=''; \
608: list2='$(man_MANS)'; \
609: test -n "$(man8dir)" \
610: && test -n "`echo $$list1$$list2`" \
611: || exit 0; \
612: echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
613: $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
614: { for i in $$list1; do echo "$$i"; done; \
615: if test -n "$$list2"; then \
616: for i in $$list2; do echo "$$i"; done \
617: | sed -n '/\.8[a-z]*$$/p'; \
618: fi; \
619: } | while read p; do \
620: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
621: echo "$$d$$p"; echo "$$p"; \
622: done | \
623: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
624: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
625: sed 'N;N;s,\n, ,g' | { \
626: list=; while read file base inst; do \
627: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
628: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
629: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
630: fi; \
631: done; \
632: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
633: while read files; do \
634: test -z "$$files" || { \
635: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
636: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
637: done; }
638:
639: uninstall-man8:
640: @$(NORMAL_UNINSTALL)
641: @list=''; test -n "$(man8dir)" || exit 0; \
642: files=`{ for i in $$list; do echo "$$i"; done; \
643: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
644: sed -n '/\.8[a-z]*$$/p'; \
645: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
646: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
647: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
648: tags: TAGS
649: TAGS:
650:
651: ctags: CTAGS
652: CTAGS:
653:
654:
655: distdir: $(DISTFILES)
656: @list='$(MANS)'; if test -n "$$list"; then \
657: list=`for p in $$list; do \
658: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
659: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
660: if test -n "$$list" && \
661: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
662: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
663: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
664: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
665: echo " typically \`make maintainer-clean' will remove them" >&2; \
666: exit 1; \
667: else :; fi; \
668: else :; fi
669: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
670: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
671: list='$(DISTFILES)'; \
672: dist_files=`for file in $$list; do echo $$file; done | \
673: sed -e "s|^$$srcdirstrip/||;t" \
674: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
675: case $$dist_files in \
676: */*) $(MKDIR_P) `echo "$$dist_files" | \
677: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
678: sort -u` ;; \
679: esac; \
680: for file in $$dist_files; do \
681: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
682: if test -d $$d/$$file; then \
683: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
684: if test -d "$(distdir)/$$file"; then \
685: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
686: fi; \
687: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
688: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
689: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
690: fi; \
691: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
692: else \
693: test -f "$(distdir)/$$file" \
694: || cp -p $$d/$$file "$(distdir)/$$file" \
695: || exit 1; \
696: fi; \
697: done
698: $(MAKE) $(AM_MAKEFLAGS) \
699: top_distdir="$(top_distdir)" distdir="$(distdir)" \
700: dist-info
701: check-am: all-am
702: check: $(BUILT_SOURCES)
703: $(MAKE) $(AM_MAKEFLAGS) check-am
704: all-am: Makefile $(INFO_DEPS) $(MANS)
705: installdirs:
706: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
707: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
708: done
709: install: $(BUILT_SOURCES)
710: $(MAKE) $(AM_MAKEFLAGS) install-am
711: install-exec: install-exec-am
712: install-data: install-data-am
713: uninstall: uninstall-am
714:
715: install-am: all-am
716: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
717:
718: installcheck: installcheck-am
719: install-strip:
720: if test -z '$(STRIP)'; then \
721: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
722: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
723: install; \
724: else \
725: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
726: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
727: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
728: fi
729: mostlyclean-generic:
730:
731: clean-generic:
732:
733: distclean-generic:
734: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
735: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
736:
737: maintainer-clean-generic:
738: @echo "This command is intended for maintainers to use"
739: @echo "it deletes files that may require special tools to rebuild."
740: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
741: clean: clean-am
742:
743: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
744:
745: distclean: distclean-am
746: -rm -f Makefile
747: distclean-am: clean-am distclean-generic
748:
749: dvi: dvi-am
750:
751: dvi-am: $(DVIS)
752:
753: html: html-am
754:
755: html-am: $(HTMLS)
756:
757: info: info-am
758:
759: info-am: $(INFO_DEPS)
760:
761: install-data-am: install-info-am install-man
762:
763: install-dvi: install-dvi-am
764:
765: install-dvi-am: $(DVIS)
766: @$(NORMAL_INSTALL)
767: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
768: if test -n "$$list"; then \
769: echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
770: $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
771: fi; \
772: for p in $$list; do \
773: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
774: echo "$$d$$p"; \
775: done | $(am__base_list) | \
776: while read files; do \
777: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
778: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
779: done
780: install-exec-am:
781:
782: install-html: install-html-am
783:
784: install-html-am: $(HTMLS)
785: @$(NORMAL_INSTALL)
786: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
787: if test -n "$$list"; then \
788: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
789: $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
790: fi; \
791: for p in $$list; do \
792: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
793: $(am__strip_dir) \
794: d2=$$d$$p; \
795: if test -d "$$d2"; then \
796: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
797: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
798: echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
799: $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
800: else \
801: list2="$$list2 $$d2"; \
802: fi; \
803: done; \
804: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
805: while read files; do \
806: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
807: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
808: done; }
809: install-info: install-info-am
810:
811: install-info-am: $(INFO_DEPS)
812: @$(NORMAL_INSTALL)
813: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
814: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
815: if test -n "$$list"; then \
816: echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
817: $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
818: fi; \
819: for file in $$list; do \
820: case $$file in \
821: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
822: esac; \
823: if test -f $$file; then d=.; else d=$(srcdir); fi; \
824: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
825: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
826: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
827: if test -f $$ifile; then \
828: echo "$$ifile"; \
829: else : ; fi; \
830: done; \
831: done | $(am__base_list) | \
832: while read files; do \
833: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
834: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
835: @$(POST_INSTALL)
836: @if $(am__can_run_installinfo); then \
837: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
838: for file in $$list; do \
839: relfile=`echo "$$file" | sed 's|^.*/||'`; \
840: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
841: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
842: done; \
843: else : ; fi
844: install-man: install-man1 install-man8
845:
846: install-pdf: install-pdf-am
847:
848: install-pdf-am: $(PDFS)
849: @$(NORMAL_INSTALL)
850: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
851: if test -n "$$list"; then \
852: echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
853: $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
854: fi; \
855: for p in $$list; do \
856: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
857: echo "$$d$$p"; \
858: done | $(am__base_list) | \
859: while read files; do \
860: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
861: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
862: install-ps: install-ps-am
863:
864: install-ps-am: $(PSS)
865: @$(NORMAL_INSTALL)
866: @list='$(PSS)'; test -n "$(psdir)" || list=; \
867: if test -n "$$list"; then \
868: echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
869: $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
870: fi; \
871: for p in $$list; do \
872: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
873: echo "$$d$$p"; \
874: done | $(am__base_list) | \
875: while read files; do \
876: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
877: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
878: installcheck-am:
879:
880: maintainer-clean: maintainer-clean-am
881: -rm -f Makefile
882: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
883: maintainer-clean-generic maintainer-clean-vti
884:
885: mostlyclean: mostlyclean-am
886:
887: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
888: mostlyclean-libtool mostlyclean-vti
889:
890: pdf: pdf-am
891:
892: pdf-am: $(PDFS)
893:
894: ps: ps-am
895:
896: ps-am: $(PSS)
897:
898: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
899: uninstall-man uninstall-pdf-am uninstall-ps-am
900:
901: uninstall-man: uninstall-man1 uninstall-man8
902:
903: .MAKE: all check install install-am install-strip
904:
905: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
906: clean-libtool dist-info distclean distclean-generic \
907: distclean-libtool distdir dvi dvi-am html html-am info info-am \
908: install install-am install-data install-data-am install-dvi \
909: install-dvi-am install-exec install-exec-am install-html \
910: install-html-am install-info install-info-am install-man \
911: install-man1 install-man8 install-pdf install-pdf-am \
912: install-ps install-ps-am install-strip installcheck \
913: installcheck-am installdirs maintainer-clean \
914: maintainer-clean-aminfo maintainer-clean-generic \
915: maintainer-clean-vti mostlyclean mostlyclean-aminfo \
916: mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
917: pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
918: uninstall-html-am uninstall-info-am uninstall-man \
919: uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
920:
921:
922: # Have to manually specify the quagga.pdf rule in order to allow
923: # us to have a generic automatic .pdf rule to build the figure sources
924: # because it cant just work from the png's directly it seems - contrary
925: # to the documentation...
926: quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
927: $(TEXI2PDF) -o "$@" $<
928:
929: .png.eps:
930: $(PNGTOEPS) $< "$@"
931:
932: .png.pdf:
933: $(PNGTOPDF) $< "$@"
934:
935: .dia.png:
936: $(DIATOPNG) "$@" $<
937:
938: draft-zebra-00.txt: draft-zebra-00.ms
939: groff -T ascii -ms $< > $@
940:
941: # Tell versions [3.59,3.63) of GNU make to not export all variables.
942: # Otherwise a system limit (for SysV at least) may be exceeded.
943: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc