# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
esac; \
test $$am__dry = yes; \
}
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@PIMD_TRUE@am__append_1 = pimd.8
@BGPD_TRUE@am__append_2 = bgpd.8
@ISISD_TRUE@am__append_3 = isisd.8
@OSPF6D_TRUE@am__append_4 = ospf6d.8
@OSPFCLIENT_TRUE@am__append_5 = ospfclient.8
@OSPFD_TRUE@am__append_6 = ospfd.8
@RIPD_TRUE@am__append_7 = ripd.8
@RIPNGD_TRUE@am__append_8 = ripngd.8
@VTYSH_TRUE@am__append_9 = vtysh.1
@WATCHQUAGGA_TRUE@am__append_10 = watchquagga.8
@ZEBRA_TRUE@am__append_11 = zebra.8
subdir = doc
DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
$(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_sys_weak_alias.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = defines.texi
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/quagga.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = quagga.dvi
PDFS = quagga.pdf
PSS = quagga.ps
HTMLS = quagga.html
TEXINFOS = quagga.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
"$(DESTDIR)$(man8dir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man1dir = $(mandir)/man1
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BGPD = @BGPD@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONFDATE = @CONFDATE@
CONFIG_ARGS = @CONFIG_ARGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURSES = @CURSES@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEJAGNU = @DEJAGNU@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOC = @DOC@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GAWK = @GAWK@
GREP = @GREP@
HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
IF_METHOD = @IF_METHOD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
IOCTL_METHOD = @IOCTL_METHOD@
IPFORWARD = @IPFORWARD@
ISISD = @ISISD@
ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
KERNEL_METHOD = @KERNEL_METHOD@
LATEXMK = @LATEXMK@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBCAP = @LIBCAP@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBPAM = @LIBPAM@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIB_REGEX = @LIB_REGEX@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NETSNMP_CONFIG = @NETSNMP_CONFIG@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OSPF6D = @OSPF6D@
OSPFAPI = @OSPFAPI@
OSPFCLIENT = @OSPFCLIENT@
OSPFD = @OSPFD@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PDFLATEX = @PDFLATEX@
PERL = @PERL@
PIMD = @PIMD@
RANLIB = @RANLIB@
RIPD = @RIPD@
RIPNGD = @RIPNGD@
RTREAD_METHOD = @RTREAD_METHOD@
RT_METHOD = @RT_METHOD@
RUNTESTDEFAULTFLAGS = @RUNTESTDEFAULTFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SOLARIS = @SOLARIS@
STRIP = @STRIP@
VERSION = @VERSION@
VTYSH = @VTYSH@
WATCHQUAGGA = @WATCHQUAGGA@
WEAK_ALIAS = @WEAK_ALIAS@
WEAK_ALIAS_CROSSFILE = @WEAK_ALIAS_CROSSFILE@
WERROR = @WERROR@
ZEBRA = @ZEBRA@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_group = @enable_group@
enable_user = @enable_user@
enable_vty_group = @enable_vty_group@
exampledir = @exampledir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgsrcdir = @pkgsrcdir@
pkgsrcrcdir = @pkgsrcrcdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
quagga_statedir = @quagga_statedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# Dia, the version i have at least, doesn't do very good EPS output
# (some of the text is scaled strangely). So this will work, but
# it is probably better to use something like gimp to convert the
# dia exported PNG files to EPS manually.
#
# Here we use 'convert' from the well known 'ImageMagick' package
# to do conversion from png to eps/pdf for figures.
# PDF form is required for quagga.pdf, using PDFTex at least.
#
# TeX implementation, which we depend on already anyway.
#
# dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
SUFFIXES = .png .eps .dia .pdf
DIATOPNG = dia -t png -e
DIATOEPS = dia -t eps -e
PNGTOEPS = convert -antialias -contrast -despeckle
PNGTOPDF = $(PNGTOEPS)
EPSTOPDF = epstopdf
# The figure sources
figures_names_parts = -normal-processing -rs-processing \
_topologies_full _topologies_rs
figures_sources = $(figures_names_parts:%=fig%.dia)
figures_png = $(figures_names_parts:%=fig%.png)
figures_pdf = $(figures_names_parts:%=fig%.pdf)
figures_eps = $(figures_names_parts:%=fig%.eps)
figures_txt = $(figures_names_parts:%=fig%.txt)
# rather twisted logic because we have to build PDFs of the EPS figures for
# PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
# cant rely on a single automatic rule for *.pdf, eg the one automatically
# provided by automake. If you are an automake wizard, please feel free to
# compact it somehow.
# Built from defines.texi.in
BUILT_SOURCES = defines.texi
info_TEXINFOS = quagga.texi
quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi \
install.texi ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi \
overview.texi protocol.texi ripd.texi ripngd.texi routemap.texi \
snmp.texi vtysh.texi routeserver.texi defines.texi $(figures_png) \
snmptrap.texi ospf_fundamentals.texi $(figures_txt)
man_MANS = $(am__append_1) $(am__append_2) $(am__append_3) \
$(am__append_4) $(am__append_5) $(am__append_6) \
$(am__append_7) $(am__append_8) $(am__append_9) \
$(am__append_10) $(am__append_11)
EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt \
bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ripd.8 \
ripngd.8 pimd.8 vtysh.1 watchquagga.8 zebra.8 \
mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
mpls/opaque_lsa.txt mpls/ospfd.conf \
$(figures_sources) $(figures_png) $(figures_txt) \
texinfo.tex
all: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
.texi.info:
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $<
.texi.pdf:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $<
.texi.html:
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
else \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
$(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
$(srcdir)/version.texi: $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
@(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp
@cmp -s vti.tmp $(srcdir)/version.texi \
|| (echo "Updating $(srcdir)/version.texi"; \
cp vti.tmp $(srcdir)/version.texi)
-@rm -f vti.tmp
@cp $(srcdir)/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp
maintainer-clean-vti:
-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
clean-aminfo:
-test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
|| rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
install-man1: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man8: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man8dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.8[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
done; }
uninstall-man8:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man8dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.8[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@list='$(MANS)'; if test -n "$$list"; then \
list=`for p in $$list; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
if test -n "$$list" && \
grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
echo " typically \`make maintainer-clean' will remove them" >&2; \
exit 1; \
else :; fi; \
else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am
clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am: $(DVIS)
html: html-am
html-am: $(HTMLS)
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-info-am install-man
install-dvi: install-dvi-am
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man: install-man1 install-man8
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
mostlyclean-libtool mostlyclean-vti
pdf: pdf-am
pdf-am: $(PDFS)
ps: ps-am
ps-am: $(PSS)
uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-man uninstall-pdf-am uninstall-ps-am
uninstall-man: uninstall-man1 uninstall-man8
.MAKE: all check install install-am install-strip
.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
clean-libtool dist-info distclean distclean-generic \
distclean-libtool distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-man1 install-man8 install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-aminfo maintainer-clean-generic \
maintainer-clean-vti mostlyclean mostlyclean-aminfo \
mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
uninstall-html-am uninstall-info-am uninstall-man \
uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
# Have to manually specify the quagga.pdf rule in order to allow
# us to have a generic automatic .pdf rule to build the figure sources
# because it cant just work from the png's directly it seems - contrary
# to the documentation...
quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
$(TEXI2PDF) -o "$@" $< || true
.png.eps:
$(PNGTOEPS) $< "$@"
.png.pdf:
$(PNGTOPDF) $< "$@"
.dia.png:
$(DIATOPNG) "$@" $<
draft-zebra-00.txt: draft-zebra-00.ms
groff -T ascii -ms $< > $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc