1: # Makefile.in generated by automake 1.12.6 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994-2012 Free Software Foundation, Inc.
5:
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16: VPATH = @srcdir@
17: am__make_dryrun = \
18: { \
19: am__dry=no; \
20: case $$MAKEFLAGS in \
21: *\\[\ \ ]*) \
22: echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
23: | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
24: *) \
25: for am__flg in $$MAKEFLAGS; do \
26: case $$am__flg in \
27: *=*|--*) ;; \
28: *n*) am__dry=yes; break;; \
29: esac; \
30: done;; \
31: esac; \
32: test $$am__dry = yes; \
33: }
34: pkgdatadir = $(datadir)/@PACKAGE@
35: pkgincludedir = $(includedir)/@PACKAGE@
36: pkglibdir = $(libdir)/@PACKAGE@
37: pkglibexecdir = $(libexecdir)/@PACKAGE@
38: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
39: install_sh_DATA = $(install_sh) -c -m 644
40: install_sh_PROGRAM = $(install_sh) -c
41: install_sh_SCRIPT = $(install_sh) -c
42: INSTALL_HEADER = $(INSTALL_DATA)
43: transform = $(program_transform_name)
44: NORMAL_INSTALL = :
45: PRE_INSTALL = :
46: POST_INSTALL = :
47: NORMAL_UNINSTALL = :
48: PRE_UNINSTALL = :
49: POST_UNINSTALL = :
50: build_triplet = @build@
51: host_triplet = @host@
52: target_triplet = @target@
53: @BGPD_TRUE@am__append_1 = bgpd.8
54: @ISISD_TRUE@am__append_2 = isisd.8
55: @OSPF6D_TRUE@am__append_3 = ospf6d.8
56: @OSPFCLIENT_TRUE@am__append_4 = ospfclient.8
57: @OSPFD_TRUE@am__append_5 = ospfd.8
58: @RIPD_TRUE@am__append_6 = ripd.8
59: @RIPNGD_TRUE@am__append_7 = ripngd.8
60: @VTYSH_TRUE@am__append_8 = vtysh.1
61: @WATCHQUAGGA_TRUE@am__append_9 = watchquagga.8
62: @ZEBRA_TRUE@am__append_10 = zebra.8
63: subdir = doc
64: DIST_COMMON = $(quagga_TEXINFOS) $(srcdir)/Makefile.am \
65: $(srcdir)/Makefile.in $(srcdir)/defines.texi.in \
66: $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
67: texinfo.tex
68: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
69: am__aclocal_m4_deps = $(top_srcdir)/m4/ax_sys_weak_alias.m4 \
70: $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
71: $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
72: $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
73: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
74: $(ACLOCAL_M4)
75: mkinstalldirs = $(install_sh) -d
76: CONFIG_HEADER = $(top_builddir)/config.h
77: CONFIG_CLEAN_FILES = defines.texi
78: CONFIG_CLEAN_VPATH_FILES =
79: SOURCES =
80: DIST_SOURCES =
81: INFO_DEPS = $(srcdir)/quagga.info
82: am__TEXINFO_TEX_DIR = $(srcdir)
83: DVIS = quagga.dvi
84: PDFS = quagga.pdf
85: PSS = quagga.ps
86: HTMLS = quagga.html
87: TEXINFOS = quagga.texi
88: TEXI2DVI = texi2dvi
89: TEXI2PDF = $(TEXI2DVI) --pdf --batch
90: MAKEINFOHTML = $(MAKEINFO) --html
91: AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
92: DVIPS = dvips
93: am__can_run_installinfo = \
94: case $$AM_UPDATE_INFO_DIR in \
95: n|no|NO) false;; \
96: *) (install-info --version) >/dev/null 2>&1;; \
97: esac
98: am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
99: "$(DESTDIR)$(man8dir)"
100: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
101: am__vpath_adj = case $$p in \
102: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
103: *) f=$$p;; \
104: esac;
105: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
106: am__install_max = 40
107: am__nobase_strip_setup = \
108: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
109: am__nobase_strip = \
110: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
111: am__nobase_list = $(am__nobase_strip_setup); \
112: for p in $$list; do echo "$$p $$p"; done | \
113: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
114: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
115: if (++n[$$2] == $(am__install_max)) \
116: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
117: END { for (dir in files) print dir, files[dir] }'
118: am__base_list = \
119: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
120: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
121: am__uninstall_files_from_dir = { \
122: test -z "$$files" \
123: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
124: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
125: $(am__cd) "$$dir" && rm -f $$files; }; \
126: }
127: man1dir = $(mandir)/man1
128: man8dir = $(mandir)/man8
129: NROFF = nroff
130: MANS = $(man_MANS)
131: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
132: ACLOCAL = @ACLOCAL@
133: AMTAR = @AMTAR@
134: AR = @AR@
135: AUTOCONF = @AUTOCONF@
136: AUTOHEADER = @AUTOHEADER@
137: AUTOMAKE = @AUTOMAKE@
138: AWK = @AWK@
139: BABELD = @BABELD@
140: BGPD = @BGPD@
141: BUILD_TESTS = @BUILD_TESTS@
142: CC = @CC@
143: CCDEPMODE = @CCDEPMODE@
144: CFLAGS = @CFLAGS@
145: CONFDATE = @CONFDATE@
146: CPP = @CPP@
147: CPPFLAGS = @CPPFLAGS@
148: CURSES = @CURSES@
149: CYGPATH_W = @CYGPATH_W@
150: DEFS = @DEFS@
151: DEPDIR = @DEPDIR@
152: DLLTOOL = @DLLTOOL@
153: DOC = @DOC@
154: DSYMUTIL = @DSYMUTIL@
155: DUMPBIN = @DUMPBIN@
156: ECHO_C = @ECHO_C@
157: ECHO_N = @ECHO_N@
158: ECHO_T = @ECHO_T@
159: EGREP = @EGREP@
160: EXEEXT = @EXEEXT@
161: FGREP = @FGREP@
162: GAWK = @GAWK@
163: GREP = @GREP@
164: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
165: IF_METHOD = @IF_METHOD@
166: IF_PROC = @IF_PROC@
167: INCLUDES = @INCLUDES@
168: INSTALL = @INSTALL@
169: INSTALL_DATA = @INSTALL_DATA@
170: INSTALL_PROGRAM = @INSTALL_PROGRAM@
171: INSTALL_SCRIPT = @INSTALL_SCRIPT@
172: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
173: IOCTL_METHOD = @IOCTL_METHOD@
174: IPFORWARD = @IPFORWARD@
175: ISISD = @ISISD@
176: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
177: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
178: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
179: KERNEL_METHOD = @KERNEL_METHOD@
180: LATEXMK = @LATEXMK@
181: LD = @LD@
182: LDFLAGS = @LDFLAGS@
183: LIBCAP = @LIBCAP@
184: LIBM = @LIBM@
185: LIBOBJS = @LIBOBJS@
186: LIBPAM = @LIBPAM@
187: LIBREADLINE = @LIBREADLINE@
188: LIBS = @LIBS@
189: LIBTOOL = @LIBTOOL@
190: LIB_IPV6 = @LIB_IPV6@
191: LIB_REGEX = @LIB_REGEX@
192: LIPO = @LIPO@
193: LN_S = @LN_S@
194: LTLIBOBJS = @LTLIBOBJS@
195: MAKEINFO = @MAKEINFO@
196: MANIFEST_TOOL = @MANIFEST_TOOL@
197: MKDIR_P = @MKDIR_P@
198: MULTIPATH_NUM = @MULTIPATH_NUM@
199: NETSNMP_CONFIG = @NETSNMP_CONFIG@
200: NM = @NM@
201: NMEDIT = @NMEDIT@
202: OBJDUMP = @OBJDUMP@
203: OBJEXT = @OBJEXT@
204: OSPF6D = @OSPF6D@
205: OSPFAPI = @OSPFAPI@
206: OSPFCLIENT = @OSPFCLIENT@
207: OSPFD = @OSPFD@
208: OTHER_METHOD = @OTHER_METHOD@
209: OTOOL = @OTOOL@
210: OTOOL64 = @OTOOL64@
211: PACKAGE = @PACKAGE@
212: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
213: PACKAGE_NAME = @PACKAGE_NAME@
214: PACKAGE_STRING = @PACKAGE_STRING@
215: PACKAGE_TARNAME = @PACKAGE_TARNAME@
216: PACKAGE_URL = @PACKAGE_URL@
217: PACKAGE_VERSION = @PACKAGE_VERSION@
218: PATH_SEPARATOR = @PATH_SEPARATOR@
219: PDFLATEX = @PDFLATEX@
220: PERL = @PERL@
221: PICFLAGS = @PICFLAGS@
222: PILDFLAGS = @PILDFLAGS@
223: RANLIB = @RANLIB@
224: RIPD = @RIPD@
225: RIPNGD = @RIPNGD@
226: RTREAD_METHOD = @RTREAD_METHOD@
227: RT_METHOD = @RT_METHOD@
228: SED = @SED@
229: SET_MAKE = @SET_MAKE@
230: SHELL = @SHELL@
231: SOLARIS = @SOLARIS@
232: STRIP = @STRIP@
233: VERSION = @VERSION@
234: VTYSH = @VTYSH@
235: WATCHQUAGGA = @WATCHQUAGGA@
236: WEAK_ALIAS = @WEAK_ALIAS@
237: WEAK_ALIAS_CROSSFILE = @WEAK_ALIAS_CROSSFILE@
238: ZEBRA = @ZEBRA@
239: abs_builddir = @abs_builddir@
240: abs_srcdir = @abs_srcdir@
241: abs_top_builddir = @abs_top_builddir@
242: abs_top_srcdir = @abs_top_srcdir@
243: ac_ct_AR = @ac_ct_AR@
244: ac_ct_CC = @ac_ct_CC@
245: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
246: am__include = @am__include@
247: am__leading_dot = @am__leading_dot@
248: am__quote = @am__quote@
249: am__tar = @am__tar@
250: am__untar = @am__untar@
251: bindir = @bindir@
252: build = @build@
253: build_alias = @build_alias@
254: build_cpu = @build_cpu@
255: build_os = @build_os@
256: build_vendor = @build_vendor@
257: builddir = @builddir@
258: datadir = @datadir@
259: datarootdir = @datarootdir@
260: docdir = @docdir@
261: dvidir = @dvidir@
262: enable_group = @enable_group@
263: enable_user = @enable_user@
264: enable_vty_group = @enable_vty_group@
265: exampledir = @exampledir@
266: exec_prefix = @exec_prefix@
267: host = @host@
268: host_alias = @host_alias@
269: host_cpu = @host_cpu@
270: host_os = @host_os@
271: host_vendor = @host_vendor@
272: htmldir = @htmldir@
273: includedir = @includedir@
274: infodir = @infodir@
275: install_sh = @install_sh@
276: libdir = @libdir@
277: libexecdir = @libexecdir@
278: localedir = @localedir@
279: localstatedir = @localstatedir@
280: mandir = @mandir@
281: mkdir_p = @mkdir_p@
282: oldincludedir = @oldincludedir@
283: pdfdir = @pdfdir@
284: pkgsrcdir = @pkgsrcdir@
285: pkgsrcrcdir = @pkgsrcrcdir@
286: prefix = @prefix@
287: program_transform_name = @program_transform_name@
288: psdir = @psdir@
289: quagga_statedir = @quagga_statedir@
290: sbindir = @sbindir@
291: sharedstatedir = @sharedstatedir@
292: srcdir = @srcdir@
293: sysconfdir = @sysconfdir@
294: target = @target@
295: target_alias = @target_alias@
296: target_cpu = @target_cpu@
297: target_os = @target_os@
298: target_vendor = @target_vendor@
299: top_build_prefix = @top_build_prefix@
300: top_builddir = @top_builddir@
301: top_srcdir = @top_srcdir@
302:
303: # Dia, the version i have at least, doesn't do very good EPS output
304: # (some of the text is scaled strangely). So this will work, but
305: # it is probably better to use something like gimp to convert the
306: # dia exported PNG files to EPS manually.
307: #
308: # Here we use 'convert' from the well known 'ImageMagick' package
309: # to do conversion from png to eps/pdf for figures.
310: # PDF form is required for quagga.pdf, using PDFTex at least.
311: #
312: # TeX implementation, which we depend on already anyway.
313: #
314: # dia -> (dia) -> png -> (convert) -> eps -> (epstopdf) -> pdf
315: SUFFIXES = .png .eps .dia .pdf
316: DIATOPNG = dia -t png -e
317: DIATOEPS = dia -t eps -e
318: PNGTOEPS = convert -antialias -contrast -despeckle
319: PNGTOPDF = $(PNGTOEPS)
320: EPSTOPDF = epstopdf
321:
322: # The figure sources
323: figures_names_parts = -normal-processing -rs-processing \
324: _topologies_full _topologies_rs
325:
326: figures_sources = $(figures_names_parts:%=fig%.dia)
327: figures_png = $(figures_names_parts:%=fig%.png)
328: figures_pdf = $(figures_names_parts:%=fig%.pdf)
329: figures_eps = $(figures_names_parts:%=fig%.eps)
330: figures_txt = $(figures_names_parts:%=fig%.txt)
331:
332: # rather twisted logic because we have to build PDFs of the EPS figures for
333: # PDFTex and yet build one PDF, quagga.pdf, from texi source. Which means we
334: # cant rely on a single automatic rule for *.pdf, eg the one automatically
335: # provided by automake. If you are an automake wizard, please feel free to
336: # compact it somehow.
337:
338: # Built from defines.texi.in
339: BUILT_SOURCES = defines.texi
340: info_TEXINFOS = quagga.texi
341: quagga_TEXINFOS = appendix.texi babeld.texi basic.texi bgpd.texi filter.texi \
342: install.texi ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi \
343: overview.texi protocol.texi ripd.texi ripngd.texi routemap.texi \
344: snmp.texi vtysh.texi routeserver.texi defines.texi $(figures_png) \
345: snmptrap.texi $(figures_txt)
346:
347: man_MANS = $(am__append_1) $(am__append_2) $(am__append_3) \
348: $(am__append_4) $(am__append_5) $(am__append_6) \
349: $(am__append_7) $(am__append_8) $(am__append_9) \
350: $(am__append_10)
351: EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt \
352: bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ripd.8 \
353: ripngd.8 vtysh.1 watchquagga.8 zebra.8 \
354: mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
355: mpls/opaque_lsa.txt mpls/ospfd.conf \
356: $(figures_sources) $(figures_png) $(figures_txt)
357:
358: all: $(BUILT_SOURCES)
359: $(MAKE) $(AM_MAKEFLAGS) all-am
360:
361: .SUFFIXES:
362: .SUFFIXES: .png .eps .dia .pdf .dvi .html .info .ps .texi
363: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
364: @for dep in $?; do \
365: case '$(am__configure_deps)' in \
366: *$$dep*) \
367: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
368: && { if test -f $@; then exit 0; else break; fi; }; \
369: exit 1;; \
370: esac; \
371: done; \
372: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
373: $(am__cd) $(top_srcdir) && \
374: $(AUTOMAKE) --gnu doc/Makefile
375: .PRECIOUS: Makefile
376: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
377: @case '$?' in \
378: *config.status*) \
379: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
380: *) \
381: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
382: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
383: esac;
384:
385: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
386: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
387:
388: $(top_srcdir)/configure: $(am__configure_deps)
389: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
390: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
391: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
392: $(am__aclocal_m4_deps):
393: defines.texi: $(top_builddir)/config.status $(srcdir)/defines.texi.in
394: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
395:
396: mostlyclean-libtool:
397: -rm -f *.lo
398:
399: clean-libtool:
400: -rm -rf .libs _libs
401:
402: .texi.info:
403: restore=: && backupdir="$(am__leading_dot)am$$$$" && \
404: am__cwd=`pwd` && $(am__cd) $(srcdir) && \
405: rm -rf $$backupdir && mkdir $$backupdir && \
406: if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
407: for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
408: if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
409: done; \
410: else :; fi && \
411: cd "$$am__cwd"; \
412: if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
413: -o $@ $<; \
414: then \
415: rc=0; \
416: $(am__cd) $(srcdir); \
417: else \
418: rc=$$?; \
419: $(am__cd) $(srcdir) && \
420: $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
421: fi; \
422: rm -rf $$backupdir; exit $$rc
423:
424: .texi.dvi:
425: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
426: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
427: $(TEXI2DVI) --clean $<
428:
429: .texi.pdf:
430: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
431: MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
432: $(TEXI2PDF) --clean $<
433:
434: .texi.html:
435: rm -rf $(@:.html=.htp)
436: if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
437: -o $(@:.html=.htp) $<; \
438: then \
439: rm -rf $@; \
440: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
441: mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
442: else \
443: if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
444: rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
445: exit 1; \
446: fi
447: $(srcdir)/quagga.info: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
448: quagga.dvi: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
449: quagga.html: quagga.texi $(srcdir)/version.texi $(quagga_TEXINFOS)
450: $(srcdir)/version.texi: $(srcdir)/stamp-vti
451: $(srcdir)/stamp-vti: quagga.texi $(top_srcdir)/configure
452: @(dir=.; test -f ./quagga.texi || dir=$(srcdir); \
453: set `$(SHELL) $(srcdir)/mdate-sh $$dir/quagga.texi`; \
454: echo "@set UPDATED $$1 $$2 $$3"; \
455: echo "@set UPDATED-MONTH $$2 $$3"; \
456: echo "@set EDITION $(VERSION)"; \
457: echo "@set VERSION $(VERSION)") > vti.tmp
458: @cmp -s vti.tmp $(srcdir)/version.texi \
459: || (echo "Updating $(srcdir)/version.texi"; \
460: cp vti.tmp $(srcdir)/version.texi)
461: -@rm -f vti.tmp
462: @cp $(srcdir)/version.texi $@
463:
464: mostlyclean-vti:
465: -rm -f vti.tmp
466:
467: maintainer-clean-vti:
468: -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
469: .dvi.ps:
470: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
471: $(DVIPS) -o $@ $<
472:
473: uninstall-dvi-am:
474: @$(NORMAL_UNINSTALL)
475: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
476: for p in $$list; do \
477: $(am__strip_dir) \
478: echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
479: rm -f "$(DESTDIR)$(dvidir)/$$f"; \
480: done
481:
482: uninstall-html-am:
483: @$(NORMAL_UNINSTALL)
484: @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
485: for p in $$list; do \
486: $(am__strip_dir) \
487: echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
488: rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
489: done
490:
491: uninstall-info-am:
492: @$(PRE_UNINSTALL)
493: @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
494: list='$(INFO_DEPS)'; \
495: for file in $$list; do \
496: relfile=`echo "$$file" | sed 's|^.*/||'`; \
497: echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
498: if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
499: then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
500: done; \
501: else :; fi
502: @$(NORMAL_UNINSTALL)
503: @list='$(INFO_DEPS)'; \
504: for file in $$list; do \
505: relfile=`echo "$$file" | sed 's|^.*/||'`; \
506: relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
507: (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
508: echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
509: rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
510: else :; fi); \
511: done
512:
513: uninstall-pdf-am:
514: @$(NORMAL_UNINSTALL)
515: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
516: for p in $$list; do \
517: $(am__strip_dir) \
518: echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
519: rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
520: done
521:
522: uninstall-ps-am:
523: @$(NORMAL_UNINSTALL)
524: @list='$(PSS)'; test -n "$(psdir)" || list=; \
525: for p in $$list; do \
526: $(am__strip_dir) \
527: echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
528: rm -f "$(DESTDIR)$(psdir)/$$f"; \
529: done
530:
531: dist-info: $(INFO_DEPS)
532: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
533: list='$(INFO_DEPS)'; \
534: for base in $$list; do \
535: case $$base in \
536: $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
537: esac; \
538: if test -f $$base; then d=.; else d=$(srcdir); fi; \
539: base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
540: for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
541: if test -f $$file; then \
542: relfile=`expr "$$file" : "$$d/\(.*\)"`; \
543: test -f "$(distdir)/$$relfile" || \
544: cp -p $$file "$(distdir)/$$relfile"; \
545: else :; fi; \
546: done; \
547: done
548:
549: mostlyclean-aminfo:
550: -rm -rf quagga.aux quagga.cp quagga.cps quagga.fn quagga.fns quagga.ky \
551: quagga.kys quagga.log quagga.pg quagga.pgs quagga.tmp \
552: quagga.toc quagga.tp quagga.tps quagga.vr quagga.vrs
553:
554: clean-aminfo:
555: -test -z "quagga.dvi quagga.pdf quagga.ps quagga.html" \
556: || rm -rf quagga.dvi quagga.pdf quagga.ps quagga.html
557:
558: maintainer-clean-aminfo:
559: @list='$(INFO_DEPS)'; for i in $$list; do \
560: i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
561: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
562: rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
563: done
564: install-man1: $(man_MANS)
565: @$(NORMAL_INSTALL)
566: @list1=''; \
567: list2='$(man_MANS)'; \
568: test -n "$(man1dir)" \
569: && test -n "`echo $$list1$$list2`" \
570: || exit 0; \
571: echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
572: $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
573: { for i in $$list1; do echo "$$i"; done; \
574: if test -n "$$list2"; then \
575: for i in $$list2; do echo "$$i"; done \
576: | sed -n '/\.1[a-z]*$$/p'; \
577: fi; \
578: } | while read p; do \
579: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
580: echo "$$d$$p"; echo "$$p"; \
581: done | \
582: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
583: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
584: sed 'N;N;s,\n, ,g' | { \
585: list=; while read file base inst; do \
586: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
587: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
588: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
589: fi; \
590: done; \
591: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
592: while read files; do \
593: test -z "$$files" || { \
594: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
595: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
596: done; }
597:
598: uninstall-man1:
599: @$(NORMAL_UNINSTALL)
600: @list=''; test -n "$(man1dir)" || exit 0; \
601: files=`{ for i in $$list; do echo "$$i"; done; \
602: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
603: sed -n '/\.1[a-z]*$$/p'; \
604: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
605: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
606: dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
607: install-man8: $(man_MANS)
608: @$(NORMAL_INSTALL)
609: @list1=''; \
610: list2='$(man_MANS)'; \
611: test -n "$(man8dir)" \
612: && test -n "`echo $$list1$$list2`" \
613: || exit 0; \
614: echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
615: $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
616: { for i in $$list1; do echo "$$i"; done; \
617: if test -n "$$list2"; then \
618: for i in $$list2; do echo "$$i"; done \
619: | sed -n '/\.8[a-z]*$$/p'; \
620: fi; \
621: } | while read p; do \
622: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
623: echo "$$d$$p"; echo "$$p"; \
624: done | \
625: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
626: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
627: sed 'N;N;s,\n, ,g' | { \
628: list=; while read file base inst; do \
629: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
630: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
631: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
632: fi; \
633: done; \
634: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
635: while read files; do \
636: test -z "$$files" || { \
637: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
638: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
639: done; }
640:
641: uninstall-man8:
642: @$(NORMAL_UNINSTALL)
643: @list=''; test -n "$(man8dir)" || exit 0; \
644: files=`{ for i in $$list; do echo "$$i"; done; \
645: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
646: sed -n '/\.8[a-z]*$$/p'; \
647: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
648: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
649: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
650: tags: TAGS
651: TAGS:
652:
653: ctags: CTAGS
654: CTAGS:
655:
656: cscope cscopelist:
657:
658:
659: distdir: $(DISTFILES)
660: @list='$(MANS)'; if test -n "$$list"; then \
661: list=`for p in $$list; do \
662: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
663: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
664: if test -n "$$list" && \
665: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
666: echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
667: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
668: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
669: echo " typically 'make maintainer-clean' will remove them" >&2; \
670: exit 1; \
671: else :; fi; \
672: else :; fi
673: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
674: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
675: list='$(DISTFILES)'; \
676: dist_files=`for file in $$list; do echo $$file; done | \
677: sed -e "s|^$$srcdirstrip/||;t" \
678: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
679: case $$dist_files in \
680: */*) $(MKDIR_P) `echo "$$dist_files" | \
681: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
682: sort -u` ;; \
683: esac; \
684: for file in $$dist_files; do \
685: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
686: if test -d $$d/$$file; then \
687: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
688: if test -d "$(distdir)/$$file"; then \
689: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
690: fi; \
691: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
692: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
693: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
694: fi; \
695: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
696: else \
697: test -f "$(distdir)/$$file" \
698: || cp -p $$d/$$file "$(distdir)/$$file" \
699: || exit 1; \
700: fi; \
701: done
702: $(MAKE) $(AM_MAKEFLAGS) \
703: top_distdir="$(top_distdir)" distdir="$(distdir)" \
704: dist-info
705: check-am: all-am
706: check: $(BUILT_SOURCES)
707: $(MAKE) $(AM_MAKEFLAGS) check-am
708: all-am: Makefile $(INFO_DEPS) $(MANS)
709: installdirs:
710: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \
711: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
712: done
713: install: $(BUILT_SOURCES)
714: $(MAKE) $(AM_MAKEFLAGS) install-am
715: install-exec: install-exec-am
716: install-data: install-data-am
717: uninstall: uninstall-am
718:
719: install-am: all-am
720: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
721:
722: installcheck: installcheck-am
723: install-strip:
724: if test -z '$(STRIP)'; then \
725: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
726: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
727: install; \
728: else \
729: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
730: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
731: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
732: fi
733: mostlyclean-generic:
734:
735: clean-generic:
736:
737: distclean-generic:
738: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
739: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
740:
741: maintainer-clean-generic:
742: @echo "This command is intended for maintainers to use"
743: @echo "it deletes files that may require special tools to rebuild."
744: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
745: clean: clean-am
746:
747: clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
748:
749: distclean: distclean-am
750: -rm -f Makefile
751: distclean-am: clean-am distclean-generic
752:
753: dvi: dvi-am
754:
755: dvi-am: $(DVIS)
756:
757: html: html-am
758:
759: html-am: $(HTMLS)
760:
761: info: info-am
762:
763: info-am: $(INFO_DEPS)
764:
765: install-data-am: install-info-am install-man
766:
767: install-dvi: install-dvi-am
768:
769: install-dvi-am: $(DVIS)
770: @$(NORMAL_INSTALL)
771: @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
772: if test -n "$$list"; then \
773: echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
774: $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
775: fi; \
776: for p in $$list; do \
777: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
778: echo "$$d$$p"; \
779: done | $(am__base_list) | \
780: while read files; do \
781: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
782: $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
783: done
784: install-exec-am:
785:
786: install-html: install-html-am
787:
788: install-html-am: $(HTMLS)
789: @$(NORMAL_INSTALL)
790: @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
791: if test -n "$$list"; then \
792: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
793: $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
794: fi; \
795: for p in $$list; do \
796: if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
797: $(am__strip_dir) \
798: d2=$$d$$p; \
799: if test -d "$$d2"; then \
800: echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
801: $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
802: echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
803: $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
804: else \
805: list2="$$list2 $$d2"; \
806: fi; \
807: done; \
808: test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
809: while read files; do \
810: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
811: $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
812: done; }
813: install-info: install-info-am
814:
815: install-info-am: $(INFO_DEPS)
816: @$(NORMAL_INSTALL)
817: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
818: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
819: if test -n "$$list"; then \
820: echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
821: $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
822: fi; \
823: for file in $$list; do \
824: case $$file in \
825: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
826: esac; \
827: if test -f $$file; then d=.; else d=$(srcdir); fi; \
828: file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
829: for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
830: $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
831: if test -f $$ifile; then \
832: echo "$$ifile"; \
833: else : ; fi; \
834: done; \
835: done | $(am__base_list) | \
836: while read files; do \
837: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
838: $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
839: @$(POST_INSTALL)
840: @if $(am__can_run_installinfo); then \
841: list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
842: for file in $$list; do \
843: relfile=`echo "$$file" | sed 's|^.*/||'`; \
844: echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
845: install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
846: done; \
847: else : ; fi
848: install-man: install-man1 install-man8
849:
850: install-pdf: install-pdf-am
851:
852: install-pdf-am: $(PDFS)
853: @$(NORMAL_INSTALL)
854: @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
855: if test -n "$$list"; then \
856: echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
857: $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
858: fi; \
859: for p in $$list; do \
860: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
861: echo "$$d$$p"; \
862: done | $(am__base_list) | \
863: while read files; do \
864: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
865: $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
866: install-ps: install-ps-am
867:
868: install-ps-am: $(PSS)
869: @$(NORMAL_INSTALL)
870: @list='$(PSS)'; test -n "$(psdir)" || list=; \
871: if test -n "$$list"; then \
872: echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
873: $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
874: fi; \
875: for p in $$list; do \
876: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
877: echo "$$d$$p"; \
878: done | $(am__base_list) | \
879: while read files; do \
880: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
881: $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
882: installcheck-am:
883:
884: maintainer-clean: maintainer-clean-am
885: -rm -f Makefile
886: maintainer-clean-am: distclean-am maintainer-clean-aminfo \
887: maintainer-clean-generic maintainer-clean-vti
888:
889: mostlyclean: mostlyclean-am
890:
891: mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
892: mostlyclean-libtool mostlyclean-vti
893:
894: pdf: pdf-am
895:
896: pdf-am: $(PDFS)
897:
898: ps: ps-am
899:
900: ps-am: $(PSS)
901:
902: uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
903: uninstall-man uninstall-pdf-am uninstall-ps-am
904:
905: uninstall-man: uninstall-man1 uninstall-man8
906:
907: .MAKE: all check install install-am install-strip
908:
909: .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
910: clean-libtool dist-info distclean distclean-generic \
911: distclean-libtool distdir dvi dvi-am html html-am info info-am \
912: install install-am install-data install-data-am install-dvi \
913: install-dvi-am install-exec install-exec-am install-html \
914: install-html-am install-info install-info-am install-man \
915: install-man1 install-man8 install-pdf install-pdf-am \
916: install-ps install-ps-am install-strip installcheck \
917: installcheck-am installdirs maintainer-clean \
918: maintainer-clean-aminfo maintainer-clean-generic \
919: maintainer-clean-vti mostlyclean mostlyclean-aminfo \
920: mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
921: pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
922: uninstall-html-am uninstall-info-am uninstall-man \
923: uninstall-man1 uninstall-man8 uninstall-pdf-am uninstall-ps-am
924:
925:
926: # Have to manually specify the quagga.pdf rule in order to allow
927: # us to have a generic automatic .pdf rule to build the figure sources
928: # because it cant just work from the png's directly it seems - contrary
929: # to the documentation...
930: quagga.pdf: $(info_TEXINFOS) $(figures_pdf) $(quagga_TEXINFOS)
931: $(TEXI2PDF) -o "$@" $<
932:
933: .png.eps:
934: $(PNGTOEPS) $< "$@"
935:
936: .png.pdf:
937: $(PNGTOPDF) $< "$@"
938:
939: .dia.png:
940: $(DIATOPNG) "$@" $<
941:
942: draft-zebra-00.txt: draft-zebra-00.ms
943: groff -T ascii -ms $< > $@
944:
945: # Tell versions [3.59,3.63) of GNU make to not export all variables.
946: # Otherwise a system limit (for SysV at least) may be exceeded.
947: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc