Return to cli_summary.txt CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc / mpls

Annotation of embedaddon/quagga/doc/mpls/cli_summary.txt, revision 1.1.1.1

1.1       misho       1: Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE.
                      2: ---------------------------------------------------------
                      3: 
                      4: router>
                      5: 
                      6:   show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external)
                      7: 
                      8:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|)
                      9: 
                     10:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D
                     11: 
                     12:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|)
                     13: 
                     14:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D
                     15: 
                     16:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D
                     17: 
                     18:   --> Add database items: opaque-link, opaque-area, opaque-external
                     19: 
                     20:   show mpls-te interface [INTERFACE]
                     21: 
                     22:   --> Show current MPLS-TE link-TLV parameters.
                     23:       If [INTERFACE] is omitted, all interfaces will be displayed.
                     24: 
                     25:   show mpls-te router
                     26: 
                     27:   --> Show current MPLS-TE Router-TLV parameters.
                     28: 
                     29: router> enable
                     30: router#
                     31: router# configure terminal
                     32: router(config)# interface [INTERFACE]
                     33: router(config-if)#
                     34: 
                     35:   mpls-te link max-bw BANDWIDTH
                     36: 
                     37:   --> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec).
                     38:       In integer or floating point format (1000, or 1.0e3)
                     39: 
                     40:   mpls-te link max-rsv-bw BANDWIDTH
                     41: 
                     42:   --> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec).
                     43:       In integer or floating point format (1000, or 1.0e3)
                     44: 
                     45:   mpls-te link metric <0-4294967295>
                     46: 
                     47:   --> Set MPLS-TE link-TLV parameter: MPLS-TE metric.
                     48: 
                     49:   mpls-te link rsc-clsclr BITPATTERN
                     50: 
                     51:   --> Set MPLS-TE link-TLV parameter: Resource Class/Color.
                     52:       In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff)
                     53: 
                     54:   mpls-te link unrsv-bw <0-7> BANDWIDTH
                     55: 
                     56:   --> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec).
                     57:       In integer or floating point format (1000, or 1.0e3)
                     58: 
                     59: router(config-if)# exit
                     60: router(config)# router ospf
                     61: router(config-router)#
                     62: 
                     63:   mpls-te
                     64: 
                     65:   --> Enable MPLS-TE functionality.
                     66:       Note that master-switch "ospf opaque-lsa" must also be specified.
                     67: 
                     68:   mpls-te on
                     69: 
                     70:   --> Alias of "mpls-te" command.
                     71: 
                     72:   mpls-te router-address A.B.C.D
                     73: 
                     74:   --> Set MPLS-TE Router-TLV parameter: Router Address.
                     75: 
                     76:   no mpls-te
                     77: 
                     78:   --> Disable MPLS-TE functionality.
                     79: 
                     80:   no ospf opaque-lsa
                     81: 
                     82:   --> Disable Opaque-LSAs capability.
                     83:       This node behaves Opaque-incapable node.
                     84: 
                     85:   ospf opaque-lsa
                     86: 
                     87:   --> Enable Opaque-LSAs capability.
                     88:       This is the master-switch to make this node Opaque-capable.
                     89: 
                     90: router# exit