Return to cli_summary.txt CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc / mpls

quagga

    1: Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE.
    2: ---------------------------------------------------------
    3: 
    4: router>
    5: 
    6:   show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external)
    7: 
    8:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|)
    9: 
   10:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D
   11: 
   12:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|)
   13: 
   14:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D
   15: 
   16:   show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D
   17: 
   18:   --> Add database items: opaque-link, opaque-area, opaque-external
   19: 
   20:   show mpls-te interface [INTERFACE]
   21: 
   22:   --> Show current MPLS-TE link-TLV parameters.
   23:       If [INTERFACE] is omitted, all interfaces will be displayed.
   24: 
   25:   show mpls-te router
   26: 
   27:   --> Show current MPLS-TE Router-TLV parameters.
   28: 
   29: router> enable
   30: router#
   31: router# configure terminal
   32: router(config)# interface [INTERFACE]
   33: router(config-if)#
   34: 
   35:   mpls-te link max-bw BANDWIDTH
   36: 
   37:   --> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec).
   38:       In integer or floating point format (1000, or 1.0e3)
   39: 
   40:   mpls-te link max-rsv-bw BANDWIDTH
   41: 
   42:   --> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec).
   43:       In integer or floating point format (1000, or 1.0e3)
   44: 
   45:   mpls-te link metric <0-4294967295>
   46: 
   47:   --> Set MPLS-TE link-TLV parameter: MPLS-TE metric.
   48: 
   49:   mpls-te link rsc-clsclr BITPATTERN
   50: 
   51:   --> Set MPLS-TE link-TLV parameter: Resource Class/Color.
   52:       In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff)
   53: 
   54:   mpls-te link unrsv-bw <0-7> BANDWIDTH
   55: 
   56:   --> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec).
   57:       In integer or floating point format (1000, or 1.0e3)
   58: 
   59: router(config-if)# exit
   60: router(config)# router ospf
   61: router(config-router)#
   62: 
   63:   mpls-te
   64: 
   65:   --> Enable MPLS-TE functionality.
   66:       Note that master-switch "ospf opaque-lsa" must also be specified.
   67: 
   68:   mpls-te on
   69: 
   70:   --> Alias of "mpls-te" command.
   71: 
   72:   mpls-te router-address A.B.C.D
   73: 
   74:   --> Set MPLS-TE Router-TLV parameter: Router Address.
   75: 
   76:   no mpls-te
   77: 
   78:   --> Disable MPLS-TE functionality.
   79: 
   80:   no ospf opaque-lsa
   81: 
   82:   --> Disable Opaque-LSAs capability.
   83:       This node behaves Opaque-incapable node.
   84: 
   85:   ospf opaque-lsa
   86: 
   87:   --> Enable Opaque-LSAs capability.
   88:       This is the master-switch to make this node Opaque-capable.
   89: 
   90: router# exit