![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to quagga.info-2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc|
Return to quagga.info-2 CVS log | Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc |
1.1 misho 1: This is quagga.info, produced by makeinfo version 4.13 from quagga.texi.
2:
3: Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
4:
5: Permission is granted to make and distribute verbatim copies of
6: this manual provided the copyright notice and this permission
7: notice are preserved on all copies.
8:
9: Permission is granted to copy and distribute modified versions of
10: this manual under the conditions for verbatim copying, provided
11: that the entire resulting derived work is distributed under the
12: terms of a permission notice identical to this one.
13:
14: Permission is granted to copy and distribute translations of this
15: manual into another language, under the above conditions for
16: modified versions, except that this permission notice may be
17: stated in a translation approved by Kunihiro Ishiguro.
18:
19: INFO-DIR-SECTION Routing Software:
20: START-INFO-DIR-ENTRY
21: * Quagga: (quagga). The Quagga Software Routing Suite
22: END-INFO-DIR-ENTRY
23:
24: This file documents the Quagga Software Routing Suite which manages
25: common TCP/IP routing protocols.
26:
1.1.1.3 ! misho 27: This is Edition 0.99.21, last updated 4 April 2012 of `The Quagga
! 28: Manual', for Quagga Version 0.99.21.
1.1 misho 29:
30: Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
31:
32: Permission is granted to make and distribute verbatim copies of
33: this manual provided the copyright notice and this permission
34: notice are preserved on all copies.
35:
36: Permission is granted to copy and distribute modified versions of
37: this manual under the conditions for verbatim copying, provided
38: that the entire resulting derived work is distributed under the
39: terms of a permission notice identical to this one.
40:
41: Permission is granted to copy and distribute translations of this
42: manual into another language, under the above conditions for
43: modified versions, except that this permission notice may be
44: stated in a translation approved by Kunihiro Ishiguro.
45:
46:
1.1.1.3 ! misho 47: File: quagga.info, Node: Command Index, Next: VTY Key Index, Prev: Packet Binary Dump Format, Up: Top
! 48:
! 49: Command Index
! 50: *************
! 51:
! 52: [index ]
! 53: * Menu:
! 54:
! 55: * access-class ACCESS-LIST: Basic Config Commands.
! 56: (line 142)
! 57: * access-list NAME deny IPV4-NETWORK: IP Access List. (line 8)
! 58: * access-list NAME permit IPV4-NETWORK: IP Access List. (line 7)
! 59: * aggregate-address A.B.C.D/M: Route Aggregation. (line 7)
! 60: * aggregate-address A.B.C.D/M as-set: Route Aggregation. (line 10)
! 61: * aggregate-address A.B.C.D/M summary-only: Route Aggregation.
! 62: (line 14)
! 63: * area <0-4294967295> authentication: OSPF area. (line 127)
! 64: * area <0-4294967295> authentication message-digest: OSPF area.
! 65: (line 134)
! 66: * area <0-4294967295> export-list NAME: OSPF area. (line 85)
! 67: * area <0-4294967295> filter-list prefix NAME in: OSPF area. (line 117)
! 68: * area <0-4294967295> filter-list prefix NAME out: OSPF area. (line 118)
! 69: * area <0-4294967295> import-list NAME: OSPF area. (line 109)
! 70: * area <0-4294967295> range A.B.C.D/M: OSPF area. (line 8)
! 71: * area <0-4294967295> shortcut: OSPF area. (line 55)
! 72: * area <0-4294967295> stub: OSPF area. (line 62)
! 73: * area <0-4294967295> stub no-summary: OSPF area. (line 74)
! 74: * area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 50)
! 75: * area A.B.C.D authentication: OSPF area. (line 126)
! 76: * area A.B.C.D authentication message-digest: OSPF area. (line 133)
! 77: * area A.B.C.D default-cost <0-16777215>: OSPF area. (line 80)
! 78: * area A.B.C.D export-list NAME: OSPF area. (line 84)
! 79: * area A.B.C.D filter-list prefix NAME in: OSPF area. (line 115)
! 80: * area A.B.C.D filter-list prefix NAME out: OSPF area. (line 116)
! 81: * area A.B.C.D import-list NAME: OSPF area. (line 108)
! 82: * area A.B.C.D range A.B.C.D/M: OSPF area. (line 7)
! 83: * area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 28)
! 84: * area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
! 85: (line 34)
! 86: * area A.B.C.D shortcut: OSPF area. (line 54)
! 87: * area A.B.C.D stub: OSPF area. (line 61)
! 88: * area A.B.C.D stub no-summary: OSPF area. (line 73)
! 89: * area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 49)
! 90: * auto-cost reference-bandwidth <1-4294967>: OSPF router. (line 163)
! 91: * babel hello-interval <20-655340>: Babel configuration. (line 29)
! 92: * babel resend-delay <20-655340>: Babel configuration. (line 41)
! 93: * babel split-horizon: Babel configuration. (line 22)
! 94: * babel update-interval <20-655340>: Babel configuration. (line 35)
! 95: * babel wired: Babel configuration. (line 15)
! 96: * babel wireless: Babel configuration. (line 16)
! 97: * bandwidth <1-10000000>: Interface Commands. (line 31)
! 98: * banner motd default: Basic Config Commands.
! 99: (line 124)
! 100: * bgp bestpath as-path confed: BGP decision process.
! 101: (line 19)
! 102: * bgp cluster-id A.B.C.D: Route Reflector. (line 7)
! 103: * bgp config-type cisco: Multiple instance. (line 20)
! 104: * bgp config-type zebra: Multiple instance. (line 53)
! 105: * bgp dampening <1-45> <1-20000> <1-20000> <1-255>: BGP route flap dampening.
! 106: (line 7)
! 107: * bgp multiple-instance: Multiple instance. (line 10)
! 108: * bgp router-id A.B.C.D: BGP router. (line 22)
! 109: * call NAME: Route Map Call Command.
! 110: (line 7)
! 111: * call WORD: Commands for configuring a Route Server.
! 112: (line 52)
! 113: * clear ip bgp PEER: More Show IP BGP. (line 25)
! 114: * clear ip bgp PEER soft in: More Show IP BGP. (line 28)
! 115: * clear ip prefix-list: Clear counter of ip prefix-list.
! 116: (line 7)
! 117: * clear ip prefix-list NAME: Clear counter of ip prefix-list.
! 118: (line 11)
! 119: * clear ip prefix-list NAME A.B.C.D/M: Clear counter of ip prefix-list.
! 120: (line 13)
! 121: * configure terminal: Terminal Mode Commands.
! 122: (line 13)
! 123: * continue: Route Map Exit Action Command.
! 124: (line 8)
! 125: * continue N: Route Map Exit Action Command.
! 126: (line 12)
! 127: * debug babel KIND: Babel debugging commands.
! 128: (line 7)
! 129: * debug event: More Show IP BGP. (line 39)
! 130: * debug keepalive: More Show IP BGP. (line 43)
! 131: * debug ospf ism: Debugging OSPF. (line 12)
! 132: * debug ospf ism (status|events|timers): Debugging OSPF. (line 13)
! 133: * debug ospf lsa: Debugging OSPF. (line 22)
! 134: * debug ospf lsa (generate|flooding|refresh): Debugging OSPF. (line 23)
! 135: * debug ospf nsm: Debugging OSPF. (line 17)
! 136: * debug ospf nsm (status|events|timers): Debugging OSPF. (line 18)
! 137: * debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
! 138: (line 8)
! 139: * debug ospf zebra: Debugging OSPF. (line 27)
! 140: * debug ospf zebra (interface|redistribute): Debugging OSPF. (line 28)
! 141: * debug rip events: RIP Debug Commands. (line 9)
! 142: * debug rip packet: RIP Debug Commands. (line 15)
! 143: * debug rip zebra: RIP Debug Commands. (line 22)
! 144: * debug ripng events: ripngd Terminal Mode Commands.
! 145: (line 11)
! 146: * debug ripng packet: ripngd Terminal Mode Commands.
! 147: (line 13)
! 148: * debug ripng zebra: ripngd Terminal Mode Commands.
! 149: (line 15)
! 150: * debug update: More Show IP BGP. (line 41)
! 151: * default-information originate <1>: Redistribute routes to OSPF.
! 152: (line 37)
! 153: * default-information originate: How to Announce RIP route.
! 154: (line 51)
! 155: * default-information originate always: Redistribute routes to OSPF.
! 156: (line 43)
! 157: * default-information originate always metric <0-16777214>: Redistribute routes to OSPF.
! 158: (line 45)
! 159: * default-information originate always metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
! 160: (line 47)
! 161: * default-information originate always metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
! 162: (line 49)
! 163: * default-information originate metric <0-16777214>: Redistribute routes to OSPF.
! 164: (line 38)
! 165: * default-information originate metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
! 166: (line 40)
! 167: * default-information originate metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
! 168: (line 42)
! 169: * default-metric <0-16777214>: Redistribute routes to OSPF.
! 170: (line 65)
! 171: * default-metric <1-16>: RIP Metric Manipulation.
! 172: (line 11)
! 173: * description DESCRIPTION ...: Interface Commands. (line 24)
! 174: * distance <1-255> <1>: Redistribute routes to OSPF.
! 175: (line 68)
! 176: * distance <1-255>: RIP distance. (line 9)
! 177: * distance <1-255> A.B.C.D/M <1>: BGP distance. (line 12)
! 178: * distance <1-255> A.B.C.D/M: RIP distance. (line 13)
! 179: * distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 18)
! 180: * distance <1-255> A.B.C.D/M WORD: BGP distance. (line 13)
! 181: * distance bgp <1-255> <1-255> <1-255>: BGP distance. (line 7)
! 182: * distance ospf (intra-area|inter-area|external) <1-255>: Redistribute routes to OSPF.
! 183: (line 72)
! 184: * distribute-list ACCESS_LIST (in|out) IFNAME: ripngd Filtering Commands.
! 185: (line 7)
! 186: * distribute-list ACCESS_LIST DIRECT IFNAME: Filtering RIP Routes.
! 187: (line 9)
! 188: * distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
! 189: (line 58)
! 190: * distribute-list prefix PREFIX_LIST (in|out) IFNAME: Filtering RIP Routes.
! 191: (line 32)
! 192: * dump bgp all PATH: Dump BGP packets and table.
! 193: (line 7)
! 194: * dump bgp all PATH INTERVAL: Dump BGP packets and table.
! 195: (line 8)
! 196: * dump bgp routes PATH: Dump BGP packets and table.
! 197: (line 15)
! 198: * dump bgp updates PATH: Dump BGP packets and table.
! 199: (line 11)
! 200: * dump bgp updates PATH INTERVAL: Dump BGP packets and table.
! 201: (line 12)
! 202: * enable password PASSWORD: Basic Config Commands.
! 203: (line 14)
! 204: * exec-timeout MINUTE: Basic Config Commands.
! 205: (line 130)
! 206: * exec-timeout MINUTE SECOND: Basic Config Commands.
! 207: (line 131)
! 208: * flush_timer TIME: ripngd Configuration.
! 209: (line 12)
! 210: * hostname HOSTNAME: Basic Config Commands.
! 211: (line 7)
! 212: * interface IFNAME: Interface Commands. (line 7)
! 213: * interface IFNAME area AREA: OSPF6 router. (line 12)
! 214: * ip address ADDRESS/PREFIX: Interface Commands. (line 13)
! 215: * ip address ADDRESS/PREFIX secondary: Interface Commands. (line 19)
! 216: * ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
! 217: (line 9)
! 218: * ip community-list <1-99> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
! 219: (line 14)
! 220: * ip community-list <100-199> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
! 221: (line 20)
! 222: * ip community-list expanded NAME {permit|deny} LINE: BGP Community Lists.
! 223: (line 30)
! 224: * ip community-list NAME {permit|deny} COMMUNITY: Numbered BGP Community Lists.
! 225: (line 25)
! 226: * ip community-list standard NAME {permit|deny} COMMUNITY: BGP Community Lists.
! 227: (line 20)
! 228: * ip extcommunity-list expanded NAME {permit|deny} LINE: BGP Extended Community Lists.
! 229: (line 21)
! 230: * ip extcommunity-list standard NAME {permit|deny} EXTCOMMUNITY: BGP Extended Community Lists.
! 231: (line 10)
! 232: * ip ospf authentication message-digest: OSPF interface. (line 17)
! 233: * ip ospf authentication-key AUTH_KEY: OSPF interface. (line 7)
! 234: * ip ospf cost <1-65535>: OSPF interface. (line 45)
! 235: * ip ospf dead-interval <1-65535>: OSPF interface. (line 50)
! 236: * ip ospf dead-interval minimal hello-multiplier <2-20>: OSPF interface.
! 237: (line 52)
! 238: * ip ospf hello-interval <1-65535>: OSPF interface. (line 69)
! 239: * ip ospf message-digest-key KEYID md5 KEY: OSPF interface. (line 33)
! 240: * ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point): OSPF interface.
! 241: (line 80)
! 242: * ip ospf priority <0-255>: OSPF interface. (line 84)
! 243: * ip ospf retransmit-interval <1-65535>: OSPF interface. (line 91)
! 244: * ip ospf transmit-delay: OSPF interface. (line 97)
! 245: * ip prefix-list NAME (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
! 246: (line 16)
! 247: * ip prefix-list NAME description DESC: ip prefix-list description.
! 248: (line 7)
! 249: * ip prefix-list NAME seq NUMBER (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
! 250: (line 18)
! 251: * ip prefix-list sequence-number: ip prefix-list sequential number control.
! 252: (line 7)
! 253: * ip protocol PROTOCOL route-map ROUTEMAP: zebra Route Filtering.
! 254: (line 12)
! 255: * ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
! 256: (line 43)
! 257: * ip rip authentication mode md5: RIP Authentication. (line 29)
! 258: * ip rip authentication mode text: RIP Authentication. (line 33)
! 259: * ip rip authentication string STRING: RIP Authentication. (line 37)
! 260: * ip rip receive version VERSION: RIP Version Control. (line 44)
! 261: * ip rip send version VERSION: RIP Version Control. (line 33)
! 262: * ip route NETWORK GATEWAY: Static Route Commands.
! 263: (line 10)
! 264: * ip route NETWORK GATEWAY DISTANCE: Static Route Commands.
! 265: (line 36)
! 266: * ip route NETWORK NETMASK GATEWAY: Static Route Commands.
! 267: (line 25)
! 268: * ip split-horizon: RIP Configuration. (line 70)
! 269: * ipv6 address ADDRESS/PREFIX: Interface Commands. (line 14)
! 270: * ipv6 nd adv-interval-option: Router Advertisement.
! 271: (line 131)
! 272: * ipv6 nd home-agent-config-flag: Router Advertisement.
! 273: (line 101)
! 274: * ipv6 nd home-agent-lifetime <0-65520>: Router Advertisement.
! 275: (line 120)
! 276: * ipv6 nd home-agent-preference <0-65535>: Router Advertisement.
! 277: (line 109)
! 278: * ipv6 nd managed-config-flag: Router Advertisement.
! 279: (line 84)
! 280: * ipv6 nd mtu <1-65535>: Router Advertisement.
! 281: (line 146)
! 282: * ipv6 nd other-config-flag: Router Advertisement.
! 283: (line 93)
! 284: * ipv6 nd prefix IPV6PREFIX [VALID-LIFETIME] [PREFERRED-LIFETIME] [off-link] [no-autoconfig] [router-address]: Router Advertisement.
! 285: (line 14)
! 286: * ipv6 nd ra-interval <1-1800>: Router Advertisement.
! 287: (line 49)
! 288: * ipv6 nd ra-interval msec <70-1800000>: Router Advertisement.
! 289: (line 56)
! 290: * ipv6 nd ra-lifetime <0-9000>: Router Advertisement.
! 291: (line 63)
! 292: * ipv6 nd reachable-time <1-3600000>: Router Advertisement.
! 293: (line 75)
! 294: * ipv6 nd router-preference (high|medium|low): Router Advertisement.
! 295: (line 139)
! 296: * ipv6 nd suppress-ra: Router Advertisement.
! 297: (line 10)
! 298: * ipv6 ospf6 cost COST: OSPF6 interface. (line 7)
! 299: * ipv6 ospf6 dead-interval DEADINTERVAL: OSPF6 interface. (line 13)
! 300: * ipv6 ospf6 hello-interval HELLOINTERVAL: OSPF6 interface. (line 10)
! 301: * ipv6 ospf6 priority PRIORITY: OSPF6 interface. (line 20)
! 302: * ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL: OSPF6 interface.
! 303: (line 17)
! 304: * ipv6 ospf6 transmit-delay TRANSMITDELAY: OSPF6 interface. (line 23)
! 305: * ipv6 route NETWORK GATEWAY: Static Route Commands.
! 306: (line 77)
! 307: * ipv6 route NETWORK GATEWAY DISTANCE: Static Route Commands.
! 308: (line 78)
! 309: * line vty: Basic Config Commands.
! 310: (line 121)
! 311: * link-detect: Interface Commands. (line 37)
! 312: * list: Terminal Mode Commands.
! 313: (line 24)
! 314: * log facility FACILITY: Basic Config Commands.
! 315: (line 81)
! 316: * log file FILENAME: Basic Config Commands.
! 317: (line 41)
! 318: * log file FILENAME LEVEL: Basic Config Commands.
! 319: (line 42)
! 320: * log monitor: Basic Config Commands.
! 321: (line 68)
! 322: * log monitor LEVEL: Basic Config Commands.
! 323: (line 69)
! 324: * log record-priority: Basic Config Commands.
! 325: (line 87)
! 326: * log stdout: Basic Config Commands.
! 327: (line 28)
! 328: * log stdout LEVEL: Basic Config Commands.
! 329: (line 29)
! 330: * log syslog: Basic Config Commands.
! 331: (line 59)
! 332: * log syslog LEVEL: Basic Config Commands.
! 333: (line 60)
! 334: * log timestamp precision <0-6>: Basic Config Commands.
! 335: (line 97)
! 336: * log trap LEVEL: Basic Config Commands.
! 337: (line 17)
! 338: * log-adjacency-changes [detail]: OSPF router. (line 73)
! 339: * logmsg LEVEL MESSAGE: Terminal Mode Commands.
! 340: (line 34)
! 341: * match as-path WORD: Using AS Path in Route Map.
! 342: (line 7)
! 343: * match aspath AS_PATH: Route Map Match Command.
! 344: (line 13)
! 345: * match community COMMUNITY_LIST: Route Map Match Command.
! 346: (line 19)
! 347: * match community WORD: BGP Community in Route Map.
! 348: (line 13)
! 349: * match community WORD exact-match: BGP Community in Route Map.
! 350: (line 14)
! 351: * match extcommunity WORD: BGP Extended Communities in Route Map.
! 352: (line 7)
! 353: * match interface WORD: RIP route-map. (line 26)
! 354: * match ip address ACCESS_LIST: Route Map Match Command.
! 355: (line 7)
! 356: * match ip address prefix-list WORD: RIP route-map. (line 39)
! 357: * match ip address WORD: RIP route-map. (line 38)
! 358: * match ip next-hop IPV4_ADDR: Route Map Match Command.
! 359: (line 10)
! 360: * match ip next-hop prefix-list WORD: RIP route-map. (line 43)
! 361: * match ip next-hop WORD: RIP route-map. (line 42)
! 362: * match metric <0-4294967295>: RIP route-map. (line 48)
! 363: * match metric METRIC: Route Map Match Command.
! 364: (line 16)
! 365: * match peer {A.B.C.D|X:X::X:X}: Commands for configuring a Route Server.
! 366: (line 34)
! 367: * max-metric router-lsa [on-startup|on-shutdown] <5-86400>: OSPF router.
! 368: (line 130)
! 369: * max-metric router-lsa administrative: OSPF router. (line 131)
! 370: * multicast: Interface Commands. (line 27)
! 371: * neigbor {A.B.C.D|X.X::X.X|peer-group} route-map WORD {import|export}: Commands for configuring a Route Server.
! 372: (line 29)
! 373: * neighbor A.B.C.D: RIP Configuration. (line 34)
! 374: * neighbor A.B.C.D route-server-client: Commands for configuring a Route Server.
! 375: (line 11)
! 376: * neighbor PEER default-originate: BGP Peer commands. (line 59)
! 377: * neighbor PEER description ...: BGP Peer commands. (line 20)
! 378: * neighbor PEER distribute-list NAME [in|out]: Peer filtering.
! 379: (line 7)
! 380: * neighbor PEER dont-capability-negotiate: Capability Negotiation.
! 381: (line 51)
! 382: * neighbor PEER ebgp-multihop: BGP Peer commands. (line 17)
! 383: * neighbor PEER filter-list NAME [in|out]: Peer filtering. (line 13)
! 384: * neighbor PEER interface IFNAME: BGP Peer commands. (line 33)
! 385: * neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 76)
! 386: * neighbor PEER next-hop-self: BGP Peer commands. (line 43)
! 387: * neighbor PEER override-capability: Capability Negotiation.
! 388: (line 67)
! 389: * neighbor PEER peer-group WORD: BGP Peer Group. (line 10)
! 390: * neighbor PEER port PORT: BGP Peer commands. (line 65)
! 391: * neighbor PEER prefix-list NAME [in|out]: Peer filtering. (line 11)
! 392: * neighbor PEER remote-as ASN: Defining Peer. (line 7)
! 393: * neighbor PEER route-map NAME [in|out]: Peer filtering. (line 15)
! 394: * neighbor PEER route-reflector-client: Route Reflector. (line 9)
! 395: * neighbor PEER send-community: BGP Peer commands. (line 68)
! 396: * neighbor PEER shutdown: BGP Peer commands. (line 10)
! 397: * neighbor PEER strict-capability-match: Capability Negotiation.
! 398: (line 40)
! 399: * neighbor PEER update-source <IFNAME|ADDRESS>: BGP Peer commands.
! 400: (line 48)
! 401: * neighbor PEER version VERSION: BGP Peer commands. (line 24)
! 402: * neighbor PEER weight WEIGHT: BGP Peer commands. (line 71)
! 403: * neighbor PEER-GROUP route-server-client: Commands for configuring a Route Server.
! 404: (line 10)
! 405: * neighbor WORD peer-group: BGP Peer Group. (line 7)
! 406: * neighbor X:X::X:X route-server-client: Commands for configuring a Route Server.
! 407: (line 12)
! 408: * network A.B.C.D/M: BGP route. (line 7)
! 409: * network A.B.C.D/M area <0-4294967295>: OSPF router. (line 175)
! 410: * network A.B.C.D/M area A.B.C.D: OSPF router. (line 174)
! 411: * network IFNAME <1>: Babel configuration. (line 11)
! 412: * network IFNAME <2>: ripngd Configuration.
! 413: (line 18)
! 414: * network IFNAME: RIP Configuration. (line 27)
! 415: * network NETWORK <1>: ripngd Configuration.
! 416: (line 15)
! 417: * network NETWORK: RIP Configuration. (line 15)
! 418: * no aggregate-address A.B.C.D/M: Route Aggregation. (line 18)
! 419: * no area <0-4294967295> authentication: OSPF area. (line 129)
! 420: * no area <0-4294967295> export-list NAME: OSPF area. (line 87)
! 421: * no area <0-4294967295> filter-list prefix NAME in: OSPF area.
! 422: (line 121)
! 423: * no area <0-4294967295> filter-list prefix NAME out: OSPF area.
! 424: (line 122)
! 425: * no area <0-4294967295> import-list NAME: OSPF area. (line 111)
! 426: * no area <0-4294967295> range A.B.C.D/M: OSPF area. (line 10)
! 427: * no area <0-4294967295> shortcut: OSPF area. (line 57)
! 428: * no area <0-4294967295> stub: OSPF area. (line 64)
! 429: * no area <0-4294967295> stub no-summary: OSPF area. (line 76)
! 430: * no area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 52)
! 431: * no area A.B.C.D authentication: OSPF area. (line 128)
! 432: * no area A.B.C.D default-cost <0-16777215>: OSPF area. (line 81)
! 433: * no area A.B.C.D export-list NAME: OSPF area. (line 86)
! 434: * no area A.B.C.D filter-list prefix NAME in: OSPF area. (line 119)
! 435: * no area A.B.C.D filter-list prefix NAME out: OSPF area. (line 120)
! 436: * no area A.B.C.D import-list NAME: OSPF area. (line 110)
! 437: * no area A.B.C.D range A.B.C.D/M: OSPF area. (line 9)
! 438: * no area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 29)
! 439: * no area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
! 440: (line 36)
! 441: * no area A.B.C.D shortcut: OSPF area. (line 56)
! 442: * no area A.B.C.D stub: OSPF area. (line 63)
! 443: * no area A.B.C.D stub no-summary: OSPF area. (line 75)
! 444: * no area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 51)
! 445: * no auto-cost reference-bandwidth: OSPF router. (line 164)
! 446: * no babel split-horizon: Babel configuration. (line 23)
! 447: * no bandwidth <1-10000000>: Interface Commands. (line 32)
! 448: * no banner motd: Basic Config Commands.
! 449: (line 127)
! 450: * no bgp multiple-instance: Multiple instance. (line 14)
! 451: * no debug babel KIND: Babel debugging commands.
! 452: (line 8)
! 453: * no debug event: More Show IP BGP. (line 45)
! 454: * no debug keepalive: More Show IP BGP. (line 49)
! 455: * no debug ospf ism: Debugging OSPF. (line 14)
! 456: * no debug ospf ism (status|events|timers): Debugging OSPF. (line 15)
! 457: * no debug ospf lsa: Debugging OSPF. (line 24)
! 458: * no debug ospf lsa (generate|flooding|refresh): Debugging OSPF.
! 459: (line 25)
! 460: * no debug ospf nsm: Debugging OSPF. (line 19)
! 461: * no debug ospf nsm (status|events|timers): Debugging OSPF. (line 20)
! 462: * no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
! 463: (line 10)
! 464: * no debug ospf zebra: Debugging OSPF. (line 29)
! 465: * no debug ospf zebra (interface|redistribute): Debugging OSPF.
! 466: (line 30)
! 467: * no debug update: More Show IP BGP. (line 47)
! 468: * no default-information originate: Redistribute routes to OSPF.
! 469: (line 50)
! 470: * no default-metric: Redistribute routes to OSPF.
! 471: (line 66)
! 472: * no default-metric <1-16>: RIP Metric Manipulation.
! 473: (line 12)
! 474: * no distance <1-255> <1>: Redistribute routes to OSPF.
! 475: (line 69)
! 476: * no distance <1-255>: RIP distance. (line 10)
! 477: * no distance <1-255> A.B.C.D/M: RIP distance. (line 14)
! 478: * no distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 19)
! 479: * no distance ospf: Redistribute routes to OSPF.
! 480: (line 73)
! 481: * no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
! 482: (line 60)
! 483: * no exec-timeout: Basic Config Commands.
! 484: (line 138)
! 485: * no ip address ADDRESS/PREFIX: Interface Commands. (line 15)
! 486: * no ip address ADDRESS/PREFIX secondary: Interface Commands. (line 20)
! 487: * no ip as-path access-list WORD: AS Path Access List. (line 12)
! 488: * no ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
! 489: (line 13)
! 490: * no ip community-list expanded NAME: BGP Community Lists. (line 37)
! 491: * no ip community-list NAME: BGP Community Lists. (line 35)
! 492: * no ip community-list standard NAME: BGP Community Lists. (line 36)
! 493: * no ip extcommunity-list expanded NAME: BGP Extended Community Lists.
! 494: (line 29)
! 495: * no ip extcommunity-list NAME: BGP Extended Community Lists.
! 496: (line 27)
! 497: * no ip extcommunity-list standard NAME: BGP Extended Community Lists.
! 498: (line 28)
! 499: * no ip ospf authentication-key: OSPF interface. (line 8)
! 500: * no ip ospf cost: OSPF interface. (line 46)
! 501: * no ip ospf dead-interval: OSPF interface. (line 53)
! 502: * no ip ospf hello-interval: OSPF interface. (line 70)
! 503: * no ip ospf message-digest-key: OSPF interface. (line 34)
! 504: * no ip ospf network: OSPF interface. (line 81)
! 505: * no ip ospf priority: OSPF interface. (line 85)
! 506: * no ip ospf retransmit interval: OSPF interface. (line 92)
! 507: * no ip ospf transmit-delay: OSPF interface. (line 98)
! 508: * no ip prefix-list NAME: IP Prefix List. (line 67)
! 509: * no ip prefix-list NAME description [DESC]: ip prefix-list description.
! 510: (line 11)
! 511: * no ip prefix-list sequence-number: ip prefix-list sequential number control.
! 512: (line 11)
! 513: * no ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
! 514: (line 44)
! 515: * no ip rip authentication mode md5: RIP Authentication. (line 30)
! 516: * no ip rip authentication mode text: RIP Authentication. (line 34)
! 517: * no ip rip authentication string STRING: RIP Authentication. (line 38)
! 518: * no ip split-horizon: RIP Configuration. (line 71)
! 519: * no ipv6 address ADDRESS/PREFIX: Interface Commands. (line 16)
! 520: * no ipv6 nd adv-interval-option: Router Advertisement.
! 521: (line 132)
! 522: * no ipv6 nd home-agent-config-flag: Router Advertisement.
! 523: (line 102)
! 524: * no ipv6 nd home-agent-lifetime [<0-65520>]: Router Advertisement.
! 525: (line 123)
! 526: * no ipv6 nd home-agent-preference [<0-65535>]: Router Advertisement.
! 527: (line 110)
! 528: * no ipv6 nd managed-config-flag: Router Advertisement.
! 529: (line 85)
! 530: * no ipv6 nd mtu [<1-65535>]: Router Advertisement.
! 531: (line 147)
! 532: * no ipv6 nd other-config-flag: Router Advertisement.
! 533: (line 94)
! 534: * no ipv6 nd ra-interval [<1-1800>]: Router Advertisement.
! 535: (line 50)
! 536: * no ipv6 nd ra-interval [msec <70-1800000>]: Router Advertisement.
! 537: (line 57)
! 538: * no ipv6 nd ra-lifetime [<0-9000>]: Router Advertisement.
! 539: (line 64)
! 540: * no ipv6 nd reachable-time [<1-3600000>]: Router Advertisement.
! 541: (line 76)
! 542: * no ipv6 nd router-preference [(high|medium|low)]: Router Advertisement.
! 543: (line 140)
! 544: * no ipv6 nd suppress-ra: Router Advertisement.
! 545: (line 7)
! 546: * no link-detect: Interface Commands. (line 38)
! 547: * no log facility: Basic Config Commands.
! 548: (line 82)
! 549: * no log file: Basic Config Commands.
! 550: (line 43)
! 551: * no log monitor: Basic Config Commands.
! 552: (line 70)
! 553: * no log record-priority: Basic Config Commands.
! 554: (line 88)
! 555: * no log stdout: Basic Config Commands.
! 556: (line 30)
! 557: * no log syslog: Basic Config Commands.
! 558: (line 61)
! 559: * no log timestamp precision: Basic Config Commands.
! 560: (line 98)
! 561: * no log trap: Basic Config Commands.
! 562: (line 18)
! 563: * no log-adjacency-changes [detail]: OSPF router. (line 74)
! 564: * no max-metric router-lsa [on-startup|on-shutdown|administrative]: OSPF router.
! 565: (line 133)
! 566: * no multicast: Interface Commands. (line 28)
! 567: * no neighbor A.B.C.D: RIP Configuration. (line 35)
! 568: * no neighbor PEER default-originate: BGP Peer commands. (line 60)
! 569: * no neighbor PEER description ...: BGP Peer commands. (line 21)
! 570: * no neighbor PEER dont-capability-negotiate: Capability Negotiation.
! 571: (line 52)
! 572: * no neighbor PEER ebgp-multihop: BGP Peer commands. (line 18)
! 573: * no neighbor PEER interface IFNAME: BGP Peer commands. (line 34)
! 574: * no neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 77)
! 575: * no neighbor PEER next-hop-self: BGP Peer commands. (line 44)
! 576: * no neighbor PEER override-capability: Capability Negotiation.
! 577: (line 68)
! 578: * no neighbor PEER route-reflector-client: Route Reflector. (line 10)
! 579: * no neighbor PEER shutdown: BGP Peer commands. (line 11)
! 580: * no neighbor PEER strict-capability-match: Capability Negotiation.
! 581: (line 41)
! 582: * no neighbor PEER update-source: BGP Peer commands. (line 49)
! 583: * no neighbor PEER weight WEIGHT: BGP Peer commands. (line 72)
! 584: * no network A.B.C.D/M: BGP route. (line 16)
! 585: * no network A.B.C.D/M area <0-4294967295>: OSPF router. (line 177)
! 586: * no network A.B.C.D/M area A.B.C.D: OSPF router. (line 176)
! 587: * no network IFNAME <1>: Babel configuration. (line 12)
! 588: * no network IFNAME: RIP Configuration. (line 28)
! 589: * no network NETWORK: RIP Configuration. (line 16)
! 590: * no ospf abr-type TYPE: OSPF router. (line 27)
! 591: * no ospf rfc1583compatibility: OSPF router. (line 63)
! 592: * no ospf router-id: OSPF router. (line 17)
! 593: * no passive-interface IFNAME: RIP Configuration. (line 58)
! 594: * no passive-interface INTERFACE: OSPF router. (line 80)
! 595: * no redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
! 596: (line 22)
! 597: * no redistribute bgp: How to Announce RIP route.
! 598: (line 44)
! 599: * no redistribute connected: How to Announce RIP route.
! 600: (line 26)
! 601: * no redistribute kernel: How to Announce RIP route.
! 602: (line 10)
! 603: * no redistribute KIND: Babel redistribution.
! 604: (line 8)
! 605: * no redistribute ospf: How to Announce RIP route.
! 606: (line 36)
! 607: * no redistribute static: How to Announce RIP route.
! 608: (line 18)
! 609: * no route A.B.C.D/M: How to Announce RIP route.
! 610: (line 54)
! 611: * no router babel: Babel configuration. (line 8)
! 612: * no router bgp ASN: BGP router. (line 19)
! 613: * no router ospf: OSPF router. (line 11)
! 614: * no router rip: RIP Configuration. (line 12)
! 615: * no shutdown: Interface Commands. (line 10)
! 616: * no smux peer OID: MIB and command reference.
! 617: (line 29)
! 618: * no smux peer OID PASSWORD: MIB and command reference.
! 619: (line 32)
! 620: * no timers basic: RIP Timers. (line 31)
! 621: * no timers throttle spf: OSPF router. (line 92)
! 622: * no version: RIP Version Control. (line 30)
! 623: * offset-list ACCESS-LIST (in|out): RIP Metric Manipulation.
! 624: (line 20)
! 625: * offset-list ACCESS-LIST (in|out) IFNAME: RIP Metric Manipulation.
! 626: (line 21)
! 627: * on-match goto N: Route Map Exit Action Command.
! 628: (line 11)
! 629: * on-match next: Route Map Exit Action Command.
! 630: (line 7)
! 631: * ospf abr-type TYPE: OSPF router. (line 26)
! 632: * ospf rfc1583compatibility: OSPF router. (line 62)
! 633: * ospf router-id A.B.C.D: OSPF router. (line 16)
! 634: * passive-interface (IFNAME|default): RIP Configuration. (line 57)
! 635: * passive-interface INTERFACE: OSPF router. (line 79)
! 636: * password PASSWORD: Basic Config Commands.
! 637: (line 10)
! 638: * redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
! 639: (line 7)
! 640: * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214>: Redistribute routes to OSPF.
! 641: (line 15)
! 642: * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
! 643: (line 17)
! 644: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2): Redistribute routes to OSPF.
! 645: (line 11)
! 646: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214>: Redistribute routes to OSPF.
! 647: (line 19)
! 648: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
! 649: (line 21)
! 650: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
! 651: (line 13)
! 652: * redistribute (kernel|connected|static|rip|bgp) ROUTE-MAP: Redistribute routes to OSPF.
! 653: (line 9)
! 654: * redistribute bgp: How to Announce RIP route.
! 655: (line 41)
! 656: * redistribute bgp metric <0-16>: How to Announce RIP route.
! 657: (line 42)
! 658: * redistribute bgp route-map ROUTE-MAP: How to Announce RIP route.
! 659: (line 43)
! 660: * redistribute connected <1>: Redistribute to BGP. (line 13)
! 661: * redistribute connected <2>: Redistribute routes to OSPF6.
! 662: (line 8)
! 663: * redistribute connected: How to Announce RIP route.
! 664: (line 23)
! 665: * redistribute connected metric <0-16>: How to Announce RIP route.
! 666: (line 24)
! 667: * redistribute connected route-map ROUTE-MAP: How to Announce RIP route.
! 668: (line 25)
! 669: * redistribute kernel <1>: Redistribute to BGP. (line 7)
! 670: * redistribute kernel: How to Announce RIP route.
! 671: (line 7)
! 672: * redistribute kernel metric <0-16>: How to Announce RIP route.
! 673: (line 8)
! 674: * redistribute kernel route-map ROUTE-MAP: How to Announce RIP route.
! 675: (line 9)
! 676: * redistribute KIND: Babel redistribution.
! 677: (line 7)
! 678: * redistribute ospf <1>: Redistribute to BGP. (line 19)
! 679: * redistribute ospf: How to Announce RIP route.
! 680: (line 33)
! 681: * redistribute ospf metric <0-16>: How to Announce RIP route.
! 682: (line 34)
! 683: * redistribute ospf route-map ROUTE-MAP: How to Announce RIP route.
! 684: (line 35)
! 685: * redistribute rip: Redistribute to BGP. (line 16)
! 686: * redistribute ripng: Redistribute routes to OSPF6.
! 687: (line 9)
! 688: * redistribute static <1>: Redistribute to BGP. (line 10)
! 689: * redistribute static <2>: Redistribute routes to OSPF6.
! 690: (line 7)
! 691: * redistribute static: How to Announce RIP route.
! 692: (line 15)
! 693: * redistribute static metric <0-16>: How to Announce RIP route.
! 694: (line 16)
! 695: * redistribute static route-map ROUTE-MAP: How to Announce RIP route.
! 696: (line 17)
! 697: * route A.B.C.D/M: How to Announce RIP route.
! 698: (line 53)
! 699: * route NETWORK: ripngd Configuration.
! 700: (line 21)
! 701: * route-map ROUTE-MAP-NAME (permit|deny) ORDER: Route Map Command.
! 702: (line 7)
! 703: * router babel: Babel configuration. (line 7)
! 704: * router bgp AS-NUMBER: BGP instance and view.
! 705: (line 11)
! 706: * router bgp AS-NUMBER view NAME: BGP instance and view.
! 707: (line 28)
! 708: * router bgp ASN: BGP router. (line 13)
! 709: * router ospf: OSPF router. (line 10)
! 710: * router ospf6: OSPF6 router. (line 7)
! 711: * router rip: RIP Configuration. (line 7)
! 712: * router ripng: ripngd Configuration.
! 713: (line 9)
! 714: * router zebra: ripngd Configuration.
! 715: (line 24)
! 716: * router-id A.B.C.D: OSPF6 router. (line 9)
! 717: * service advanced-vty: Basic Config Commands.
! 718: (line 114)
! 719: * service integrated-vtysh-config: VTY shell integrated configuration.
! 720: (line 7)
! 721: * service password-encryption: Basic Config Commands.
! 722: (line 111)
! 723: * service terminal-length <0-512>: Basic Config Commands.
! 724: (line 117)
! 725: * set as-path prepend AS-PATH: Using AS Path in Route Map.
! 726: (line 9)
! 727: * set as-path prepend AS_PATH: Route Map Set Command.
! 728: (line 19)
! 729: * set comm-list WORD delete: BGP Community in Route Map.
! 730: (line 34)
! 731: * set community COMMUNITY <1>: Route Map Set Command.
! 732: (line 22)
! 733: * set community COMMUNITY: BGP Community in Route Map.
! 734: (line 23)
! 735: * set community COMMUNITY additive: BGP Community in Route Map.
! 736: (line 24)
! 737: * set community none: BGP Community in Route Map.
! 738: (line 22)
! 739: * set extcommunity rt EXTCOMMUNITY: BGP Extended Communities in Route Map.
! 740: (line 9)
! 741: * set extcommunity soo EXTCOMMUNITY: BGP Extended Communities in Route Map.
! 742: (line 12)
! 743: * set ip next-hop A.B.C.D: RIP route-map. (line 53)
! 744: * set ip next-hop IPV4_ADDRESS: Route Map Set Command.
! 745: (line 7)
! 746: * set ipv6 next-hop global IPV6_ADDRESS: Route Map Set Command.
! 747: (line 25)
! 748: * set ipv6 next-hop local IPV6_ADDRESS: Route Map Set Command.
! 749: (line 28)
! 750: * set local-preference LOCAL_PREF: Route Map Set Command.
! 751: (line 10)
! 752: * set metric <0-4294967295>: RIP route-map. (line 58)
! 753: * set metric METRIC: Route Map Set Command.
! 754: (line 16)
! 755: * set src ADDRESS: zebra Route Filtering.
! 756: (line 17)
! 757: * set weight WEIGHT: Route Map Set Command.
! 758: (line 13)
! 759: * show babel database: Show Babel information.
! 760: (line 7)
! 761: * show babel interface: Show Babel information.
! 762: (line 8)
! 763: * show babel neighbour: Show Babel information.
! 764: (line 9)
! 765: * show babel parameters: Show Babel information.
! 766: (line 10)
! 767: * show debug: More Show IP BGP. (line 37)
! 768: * show debugging ospf: Debugging OSPF. (line 32)
! 769: * show debugging rip: RIP Debug Commands. (line 29)
! 770: * show debugging ripng: ripngd Terminal Mode Commands.
! 771: (line 9)
! 772: * show interface: zebra Terminal Mode Commands.
! 773: (line 21)
! 774: * show ip bgp: Show IP BGP. (line 7)
! 775: * show ip bgp A.B.C.D: Show IP BGP. (line 8)
! 776: * show ip bgp community: Display BGP Routes by Community.
! 777: (line 11)
! 778: * show ip bgp community COMMUNITY <1>: More Show IP BGP. (line 11)
! 779: * show ip bgp community COMMUNITY: Display BGP Routes by Community.
! 780: (line 12)
! 781: * show ip bgp community COMMUNITY exact-match <1>: More Show IP BGP.
! 782: (line 12)
! 783: * show ip bgp community COMMUNITY exact-match: Display BGP Routes by Community.
! 784: (line 13)
! 785: * show ip bgp community-list WORD <1>: More Show IP BGP. (line 16)
! 786: * show ip bgp community-list WORD: Display BGP Routes by Community.
! 787: (line 20)
! 788: * show ip bgp community-list WORD exact-match <1>: More Show IP BGP.
! 789: (line 17)
! 790: * show ip bgp community-list WORD exact-match: Display BGP Routes by Community.
! 791: (line 21)
! 792: * show ip bgp dampened-paths: More Show IP BGP. (line 31)
! 793: * show ip bgp flap-statistics: More Show IP BGP. (line 34)
! 794: * show ip bgp neighbor [PEER]: More Show IP BGP. (line 23)
! 795: * show ip bgp regexp LINE <1>: More Show IP BGP. (line 7)
! 796: * show ip bgp regexp LINE: Display BGP Routes by AS Path.
! 797: (line 10)
! 798: * show ip bgp summary: More Show IP BGP. (line 21)
! 799: * show ip bgp view NAME: Viewing the view. (line 9)
! 800: * show ip bgp X:X::X:X: Show IP BGP. (line 9)
! 801: * show ip community-list: BGP Community Lists. (line 42)
! 802: * show ip community-list NAME: BGP Community Lists. (line 43)
! 803: * show ip extcommunity-list: BGP Extended Community Lists.
! 804: (line 35)
! 805: * show ip extcommunity-list NAME: BGP Extended Community Lists.
! 806: (line 36)
! 807: * show ip ospf: Showing OSPF information.
! 808: (line 7)
! 809: * show ip ospf database: Showing OSPF information.
! 810: (line 20)
! 811: * show ip ospf database (asbr-summary|external|network|router|summary): Showing OSPF information.
! 812: (line 23)
! 813: * show ip ospf database (asbr-summary|external|network|router|summary) adv-router ADV-ROUTER: Showing OSPF information.
! 814: (line 30)
! 815: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID: Showing OSPF information.
! 816: (line 25)
! 817: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID adv-router ADV-ROUTER: Showing OSPF information.
! 818: (line 28)
! 819: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID self-originate: Showing OSPF information.
! 820: (line 33)
! 821: * show ip ospf database (asbr-summary|external|network|router|summary) self-originate: Showing OSPF information.
! 822: (line 35)
! 823: * show ip ospf database max-age: Showing OSPF information.
! 824: (line 37)
! 825: * show ip ospf database self-originate: Showing OSPF information.
! 826: (line 39)
! 827: * show ip ospf interface [INTERFACE]: Showing OSPF information.
! 828: (line 11)
! 829: * show ip ospf neighbor: Showing OSPF information.
! 830: (line 15)
! 831: * show ip ospf neighbor detail: Showing OSPF information.
! 832: (line 17)
! 833: * show ip ospf neighbor INTERFACE: Showing OSPF information.
! 834: (line 16)
! 835: * show ip ospf neighbor INTERFACE detail: Showing OSPF information.
! 836: (line 18)
! 837: * show ip ospf route: Showing OSPF information.
! 838: (line 41)
! 839: * show ip prefix-list: Showing ip prefix-list.
! 840: (line 7)
! 841: * show ip prefix-list [NAME]: zebra Terminal Mode Commands.
! 842: (line 23)
! 843: * show ip prefix-list detail: Showing ip prefix-list.
! 844: (line 31)
! 845: * show ip prefix-list detail NAME: Showing ip prefix-list.
! 846: (line 33)
! 847: * show ip prefix-list NAME: Showing ip prefix-list.
! 848: (line 10)
! 849: * show ip prefix-list NAME A.B.C.D/M: Showing ip prefix-list.
! 850: (line 17)
! 851: * show ip prefix-list NAME A.B.C.D/M first-match: Showing ip prefix-list.
! 852: (line 25)
! 853: * show ip prefix-list NAME A.B.C.D/M longer: Showing ip prefix-list.
! 854: (line 23)
! 855: * show ip prefix-list NAME seq NUM: Showing ip prefix-list.
! 856: (line 13)
! 857: * show ip prefix-list summary: Showing ip prefix-list.
! 858: (line 27)
! 859: * show ip prefix-list summary NAME: Showing ip prefix-list.
! 860: (line 29)
! 861: * show ip protocol: zebra Terminal Mode Commands.
! 862: (line 27)
! 863: * show ip protocols: Show RIP Information.
! 864: (line 17)
! 865: * show ip rip: Show RIP Information.
! 866: (line 9)
! 867: * show ip ripng: ripngd Terminal Mode Commands.
! 868: (line 7)
! 869: * show ip route: zebra Terminal Mode Commands.
! 870: (line 7)
! 871: * show ipforward: zebra Terminal Mode Commands.
! 872: (line 29)
! 873: * show ipv6 ospf6 [INSTANCE_ID]: Showing OSPF6 information.
! 874: (line 7)
! 875: * show ipv6 ospf6 database: Showing OSPF6 information.
! 876: (line 11)
! 877: * show ipv6 ospf6 interface: Showing OSPF6 information.
! 878: (line 15)
! 879: * show ipv6 ospf6 neighbor: Showing OSPF6 information.
! 880: (line 18)
! 881: * show ipv6 ospf6 request-list A.B.C.D: Showing OSPF6 information.
! 882: (line 21)
! 883: * show ipv6 route: zebra Terminal Mode Commands.
! 884: (line 19)
! 885: * show ipv6 route ospf6: Showing OSPF6 information.
! 886: (line 24)
! 887: * show ipv6forward: zebra Terminal Mode Commands.
! 888: (line 34)
! 889: * show logging: Terminal Mode Commands.
! 890: (line 30)
! 891: * show route-map [NAME]: zebra Terminal Mode Commands.
! 892: (line 25)
! 893: * show version: Terminal Mode Commands.
! 894: (line 27)
! 895: * shutdown: Interface Commands. (line 9)
! 896: * smux peer OID: MIB and command reference.
! 897: (line 28)
! 898: * smux peer OID PASSWORD: MIB and command reference.
! 899: (line 31)
! 900: * table TABLENO: Static Route Commands.
! 901: (line 81)
! 902: * terminal length <0-512>: Terminal Mode Commands.
! 903: (line 17)
! 904: * timers basic UPDATE TIMEOUT GARBAGE: RIP Timers. (line 7)
! 905: * timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME: OSPF router.
! 906: (line 91)
! 907: * username USERNAME nopassword: VTY shell username. (line 7)
! 908: * version VERSION: RIP Version Control. (line 20)
! 909: * who: Terminal Mode Commands.
! 910: (line 21)
! 911: * write file: Terminal Mode Commands.
! 912: (line 10)
! 913: * write terminal: Terminal Mode Commands.
! 914: (line 7)
! 915:
! 916:
! 917: File: quagga.info, Node: VTY Key Index, Next: Index, Prev: Command Index, Up: Top
! 918:
! 919: VTY Key Index
! 920: *************
! 921:
! 922: [index ]
! 923: * Menu:
! 924:
! 925: * <DEL>: CLI Editing Commands. (line 11)
! 926: * <DOWN>: CLI Advanced Commands.
! 927: (line 17)
! 928: * <LEFT>: CLI Movement Commands.
! 929: (line 15)
! 930: * <RIGHT>: CLI Movement Commands.
! 931: (line 11)
! 932: * <TAB>: CLI Advanced Commands.
! 933: (line 24)
! 934: * <UP>: CLI Advanced Commands.
! 935: (line 21)
! 936: * ?: CLI Advanced Commands.
! 937: (line 27)
! 938: * C-a: CLI Movement Commands.
! 939: (line 24)
! 940: * C-b: CLI Movement Commands.
! 941: (line 15)
! 942: * C-c: CLI Advanced Commands.
! 943: (line 10)
! 944: * C-d: CLI Editing Commands. (line 14)
! 945: * C-e: CLI Movement Commands.
! 946: (line 27)
! 947: * C-f: CLI Movement Commands.
! 948: (line 11)
! 949: * C-h: CLI Editing Commands. (line 11)
! 950: * C-k: CLI Editing Commands. (line 23)
! 951: * C-n: CLI Advanced Commands.
! 952: (line 17)
! 953: * C-p: CLI Advanced Commands.
! 954: (line 21)
! 955: * C-t: CLI Editing Commands. (line 29)
! 956: * C-u: CLI Editing Commands. (line 26)
! 957: * C-w: CLI Editing Commands. (line 20)
! 958: * C-z: CLI Advanced Commands.
! 959: (line 13)
! 960: * M-b: CLI Movement Commands.
! 961: (line 21)
! 962: * M-d: CLI Editing Commands. (line 17)
! 963: * M-f: CLI Movement Commands.
! 964: (line 18)
! 965:
! 966:
1.1 misho 967: File: quagga.info, Node: Index, Prev: VTY Key Index, Up: Top
968:
969: Index
970: *****
971:
972: [index ]
973: * Menu:
974:
975: * About Quagga: About Quagga. (line 6)
976: * Bug hunting: Bug Reports. (line 6)
977: * Bug Reports: Bug Reports. (line 6)
978: * Build options: The Configure script and its options.
979: (line 6)
980: * Building on Linux boxes: Linux notes. (line 6)
981: * Building the system: Installation. (line 6)
982: * Compatibility with other systems: Supported Platforms. (line 6)
983: * Configuration files for running the software: Config Commands.
984: (line 6)
985: * Configuration options: The Configure script and its options.
986: (line 6)
987: * Configuring Quagga: Linux notes. (line 6)
988: * Contact information: Mailing List. (line 6)
989: * Distribution configuration: The Configure script and its options.
990: (line 6)
991: * Errors in the software: Bug Reports. (line 6)
992: * Files for running configurations: Config Commands. (line 6)
993: * Found a bug?: Bug Reports. (line 6)
994: * Getting the herd running: Config Commands. (line 6)
995: * How to get in touch with Quagga: Mailing List. (line 6)
996: * How to install Quagga: Installation. (line 6)
997: * Installation: Installation. (line 6)
998: * Installing Quagga: Installation. (line 6)
999: * Linux configurations: Linux notes. (line 6)
1000: * Mailing lists: Mailing List. (line 6)
1001: * Mailing Quagga: Mailing List. (line 6)
1002: * Making Quagga: Installation. (line 6)
1003: * Modifying the herd's behavior: Config Commands. (line 6)
1004: * Operating systems that support Quagga: Supported Platforms. (line 6)
1005: * Options for configuring: The Configure script and its options.
1006: (line 6)
1007: * Options to ./configure: The Configure script and its options.
1008: (line 6)
1009: * OSPFv2: ripngd Filtering Commands.
1010: (line 14)
1011: * Overview: Overview. (line 6)
1012: * Quagga Least-Privileges: Least-Privilege support.
1013: (line 6)
1014: * Quagga on other systems: Supported Platforms. (line 6)
1015: * Quagga Privileges: Least-Privilege support.
1016: (line 6)
1017: * Reporting bugs: Bug Reports. (line 6)
1018: * Reporting software errors: Bug Reports. (line 6)
1019: * Software architecture: System Architecture. (line 6)
1020: * Software internals: System Architecture. (line 6)
1021: * Supported platforms: Supported Platforms. (line 6)
1022: * System architecture: System Architecture. (line 6)
1023:
1024: