![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to quagga.info-2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc|
Return to quagga.info-2 CVS log | Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc |
1.1 misho 1: This is quagga.info, produced by makeinfo version 4.13 from quagga.texi.
2:
3: Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
4:
5: Permission is granted to make and distribute verbatim copies of
6: this manual provided the copyright notice and this permission
7: notice are preserved on all copies.
8:
9: Permission is granted to copy and distribute modified versions of
10: this manual under the conditions for verbatim copying, provided
11: that the entire resulting derived work is distributed under the
12: terms of a permission notice identical to this one.
13:
14: Permission is granted to copy and distribute translations of this
15: manual into another language, under the above conditions for
16: modified versions, except that this permission notice may be
17: stated in a translation approved by Kunihiro Ishiguro.
18:
19: INFO-DIR-SECTION Routing Software:
20: START-INFO-DIR-ENTRY
21: * Quagga: (quagga). The Quagga Software Routing Suite
22: END-INFO-DIR-ENTRY
23:
24: This file documents the Quagga Software Routing Suite which manages
25: common TCP/IP routing protocols.
26:
1.1.1.4 ! misho 27: This is Edition 0.99.22, last updated 27 January 2013 of `The Quagga
! 28: Manual', for Quagga Version 0.99.22.
1.1 misho 29:
30: Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
31:
32: Permission is granted to make and distribute verbatim copies of
33: this manual provided the copyright notice and this permission
34: notice are preserved on all copies.
35:
36: Permission is granted to copy and distribute modified versions of
37: this manual under the conditions for verbatim copying, provided
38: that the entire resulting derived work is distributed under the
39: terms of a permission notice identical to this one.
40:
41: Permission is granted to copy and distribute translations of this
42: manual into another language, under the above conditions for
43: modified versions, except that this permission notice may be
44: stated in a translation approved by Kunihiro Ishiguro.
45:
46:
1.1.1.3 misho 47: File: quagga.info, Node: Command Index, Next: VTY Key Index, Prev: Packet Binary Dump Format, Up: Top
48:
49: Command Index
50: *************
51:
52: [index ]
53: * Menu:
54:
55: * access-class ACCESS-LIST: Basic Config Commands.
56: (line 142)
57: * access-list NAME deny IPV4-NETWORK: IP Access List. (line 8)
58: * access-list NAME permit IPV4-NETWORK: IP Access List. (line 7)
1.1.1.4 ! misho 59: * agentx: MIB and command reference.
! 60: (line 35)
1.1.1.3 misho 61: * aggregate-address A.B.C.D/M: Route Aggregation. (line 7)
62: * aggregate-address A.B.C.D/M as-set: Route Aggregation. (line 10)
63: * aggregate-address A.B.C.D/M summary-only: Route Aggregation.
64: (line 14)
65: * area <0-4294967295> authentication: OSPF area. (line 127)
66: * area <0-4294967295> authentication message-digest: OSPF area.
67: (line 134)
68: * area <0-4294967295> export-list NAME: OSPF area. (line 85)
69: * area <0-4294967295> filter-list prefix NAME in: OSPF area. (line 117)
70: * area <0-4294967295> filter-list prefix NAME out: OSPF area. (line 118)
71: * area <0-4294967295> import-list NAME: OSPF area. (line 109)
72: * area <0-4294967295> range A.B.C.D/M: OSPF area. (line 8)
73: * area <0-4294967295> shortcut: OSPF area. (line 55)
74: * area <0-4294967295> stub: OSPF area. (line 62)
75: * area <0-4294967295> stub no-summary: OSPF area. (line 74)
76: * area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 50)
77: * area A.B.C.D authentication: OSPF area. (line 126)
78: * area A.B.C.D authentication message-digest: OSPF area. (line 133)
79: * area A.B.C.D default-cost <0-16777215>: OSPF area. (line 80)
80: * area A.B.C.D export-list NAME: OSPF area. (line 84)
81: * area A.B.C.D filter-list prefix NAME in: OSPF area. (line 115)
82: * area A.B.C.D filter-list prefix NAME out: OSPF area. (line 116)
83: * area A.B.C.D import-list NAME: OSPF area. (line 108)
84: * area A.B.C.D range A.B.C.D/M: OSPF area. (line 7)
85: * area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 28)
86: * area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
87: (line 34)
88: * area A.B.C.D shortcut: OSPF area. (line 54)
89: * area A.B.C.D stub: OSPF area. (line 61)
90: * area A.B.C.D stub no-summary: OSPF area. (line 73)
91: * area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 49)
92: * auto-cost reference-bandwidth <1-4294967>: OSPF router. (line 163)
93: * babel hello-interval <20-655340>: Babel configuration. (line 29)
94: * babel resend-delay <20-655340>: Babel configuration. (line 41)
95: * babel split-horizon: Babel configuration. (line 22)
96: * babel update-interval <20-655340>: Babel configuration. (line 35)
97: * babel wired: Babel configuration. (line 15)
98: * babel wireless: Babel configuration. (line 16)
99: * bandwidth <1-10000000>: Interface Commands. (line 31)
100: * banner motd default: Basic Config Commands.
101: (line 124)
102: * bgp bestpath as-path confed: BGP decision process.
103: (line 19)
104: * bgp cluster-id A.B.C.D: Route Reflector. (line 7)
105: * bgp config-type cisco: Multiple instance. (line 20)
106: * bgp config-type zebra: Multiple instance. (line 53)
107: * bgp dampening <1-45> <1-20000> <1-20000> <1-255>: BGP route flap dampening.
108: (line 7)
109: * bgp multiple-instance: Multiple instance. (line 10)
110: * bgp router-id A.B.C.D: BGP router. (line 22)
111: * call NAME: Route Map Call Command.
112: (line 7)
113: * call WORD: Commands for configuring a Route Server.
114: (line 52)
115: * clear ip bgp PEER: More Show IP BGP. (line 25)
116: * clear ip bgp PEER soft in: More Show IP BGP. (line 28)
117: * clear ip prefix-list: Clear counter of ip prefix-list.
118: (line 7)
119: * clear ip prefix-list NAME: Clear counter of ip prefix-list.
120: (line 11)
121: * clear ip prefix-list NAME A.B.C.D/M: Clear counter of ip prefix-list.
122: (line 13)
1.1.1.4 ! misho 123: * clear zebra fpm stats: zebra Terminal Mode Commands.
! 124: (line 41)
1.1.1.3 misho 125: * configure terminal: Terminal Mode Commands.
126: (line 13)
127: * continue: Route Map Exit Action Command.
128: (line 8)
129: * continue N: Route Map Exit Action Command.
130: (line 12)
131: * debug babel KIND: Babel debugging commands.
132: (line 7)
133: * debug event: More Show IP BGP. (line 39)
134: * debug keepalive: More Show IP BGP. (line 43)
135: * debug ospf ism: Debugging OSPF. (line 12)
136: * debug ospf ism (status|events|timers): Debugging OSPF. (line 13)
137: * debug ospf lsa: Debugging OSPF. (line 22)
138: * debug ospf lsa (generate|flooding|refresh): Debugging OSPF. (line 23)
139: * debug ospf nsm: Debugging OSPF. (line 17)
140: * debug ospf nsm (status|events|timers): Debugging OSPF. (line 18)
141: * debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
142: (line 8)
143: * debug ospf zebra: Debugging OSPF. (line 27)
144: * debug ospf zebra (interface|redistribute): Debugging OSPF. (line 28)
145: * debug rip events: RIP Debug Commands. (line 9)
146: * debug rip packet: RIP Debug Commands. (line 15)
147: * debug rip zebra: RIP Debug Commands. (line 22)
148: * debug ripng events: ripngd Terminal Mode Commands.
149: (line 11)
150: * debug ripng packet: ripngd Terminal Mode Commands.
151: (line 13)
152: * debug ripng zebra: ripngd Terminal Mode Commands.
153: (line 15)
154: * debug update: More Show IP BGP. (line 41)
155: * default-information originate <1>: Redistribute routes to OSPF.
156: (line 37)
157: * default-information originate: How to Announce RIP route.
158: (line 51)
159: * default-information originate always: Redistribute routes to OSPF.
160: (line 43)
161: * default-information originate always metric <0-16777214>: Redistribute routes to OSPF.
162: (line 45)
163: * default-information originate always metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
164: (line 47)
165: * default-information originate always metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
166: (line 49)
167: * default-information originate metric <0-16777214>: Redistribute routes to OSPF.
168: (line 38)
169: * default-information originate metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
170: (line 40)
171: * default-information originate metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
172: (line 42)
173: * default-metric <0-16777214>: Redistribute routes to OSPF.
174: (line 65)
175: * default-metric <1-16>: RIP Metric Manipulation.
176: (line 11)
177: * description DESCRIPTION ...: Interface Commands. (line 24)
178: * distance <1-255> <1>: Redistribute routes to OSPF.
179: (line 68)
180: * distance <1-255>: RIP distance. (line 9)
181: * distance <1-255> A.B.C.D/M <1>: BGP distance. (line 12)
182: * distance <1-255> A.B.C.D/M: RIP distance. (line 13)
183: * distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 18)
184: * distance <1-255> A.B.C.D/M WORD: BGP distance. (line 13)
185: * distance bgp <1-255> <1-255> <1-255>: BGP distance. (line 7)
186: * distance ospf (intra-area|inter-area|external) <1-255>: Redistribute routes to OSPF.
187: (line 72)
188: * distribute-list ACCESS_LIST (in|out) IFNAME: ripngd Filtering Commands.
189: (line 7)
190: * distribute-list ACCESS_LIST DIRECT IFNAME: Filtering RIP Routes.
191: (line 9)
192: * distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
193: (line 58)
194: * distribute-list prefix PREFIX_LIST (in|out) IFNAME: Filtering RIP Routes.
195: (line 32)
196: * dump bgp all PATH: Dump BGP packets and table.
197: (line 7)
198: * dump bgp all PATH INTERVAL: Dump BGP packets and table.
199: (line 8)
200: * dump bgp routes PATH: Dump BGP packets and table.
201: (line 15)
202: * dump bgp updates PATH: Dump BGP packets and table.
203: (line 11)
204: * dump bgp updates PATH INTERVAL: Dump BGP packets and table.
205: (line 12)
206: * enable password PASSWORD: Basic Config Commands.
207: (line 14)
208: * exec-timeout MINUTE: Basic Config Commands.
209: (line 130)
210: * exec-timeout MINUTE SECOND: Basic Config Commands.
211: (line 131)
212: * flush_timer TIME: ripngd Configuration.
213: (line 12)
214: * hostname HOSTNAME: Basic Config Commands.
215: (line 7)
216: * interface IFNAME: Interface Commands. (line 7)
217: * interface IFNAME area AREA: OSPF6 router. (line 12)
218: * ip address ADDRESS/PREFIX: Interface Commands. (line 13)
219: * ip address ADDRESS/PREFIX secondary: Interface Commands. (line 19)
220: * ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
221: (line 9)
222: * ip community-list <1-99> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
223: (line 14)
224: * ip community-list <100-199> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
225: (line 20)
226: * ip community-list expanded NAME {permit|deny} LINE: BGP Community Lists.
227: (line 30)
228: * ip community-list NAME {permit|deny} COMMUNITY: Numbered BGP Community Lists.
229: (line 25)
230: * ip community-list standard NAME {permit|deny} COMMUNITY: BGP Community Lists.
231: (line 20)
232: * ip extcommunity-list expanded NAME {permit|deny} LINE: BGP Extended Community Lists.
233: (line 21)
234: * ip extcommunity-list standard NAME {permit|deny} EXTCOMMUNITY: BGP Extended Community Lists.
235: (line 10)
236: * ip ospf authentication message-digest: OSPF interface. (line 17)
237: * ip ospf authentication-key AUTH_KEY: OSPF interface. (line 7)
238: * ip ospf cost <1-65535>: OSPF interface. (line 45)
239: * ip ospf dead-interval <1-65535>: OSPF interface. (line 50)
240: * ip ospf dead-interval minimal hello-multiplier <2-20>: OSPF interface.
241: (line 52)
242: * ip ospf hello-interval <1-65535>: OSPF interface. (line 69)
243: * ip ospf message-digest-key KEYID md5 KEY: OSPF interface. (line 33)
244: * ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point): OSPF interface.
245: (line 80)
246: * ip ospf priority <0-255>: OSPF interface. (line 84)
247: * ip ospf retransmit-interval <1-65535>: OSPF interface. (line 91)
248: * ip ospf transmit-delay: OSPF interface. (line 97)
249: * ip prefix-list NAME (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
250: (line 16)
251: * ip prefix-list NAME description DESC: ip prefix-list description.
252: (line 7)
253: * ip prefix-list NAME seq NUMBER (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
254: (line 18)
255: * ip prefix-list sequence-number: ip prefix-list sequential number control.
256: (line 7)
257: * ip protocol PROTOCOL route-map ROUTEMAP: zebra Route Filtering.
258: (line 12)
259: * ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
260: (line 43)
261: * ip rip authentication mode md5: RIP Authentication. (line 29)
262: * ip rip authentication mode text: RIP Authentication. (line 33)
263: * ip rip authentication string STRING: RIP Authentication. (line 37)
264: * ip rip receive version VERSION: RIP Version Control. (line 44)
265: * ip rip send version VERSION: RIP Version Control. (line 33)
266: * ip route NETWORK GATEWAY: Static Route Commands.
267: (line 10)
268: * ip route NETWORK GATEWAY DISTANCE: Static Route Commands.
269: (line 36)
270: * ip route NETWORK NETMASK GATEWAY: Static Route Commands.
271: (line 25)
272: * ip split-horizon: RIP Configuration. (line 70)
273: * ipv6 address ADDRESS/PREFIX: Interface Commands. (line 14)
274: * ipv6 nd adv-interval-option: Router Advertisement.
275: (line 131)
276: * ipv6 nd home-agent-config-flag: Router Advertisement.
277: (line 101)
278: * ipv6 nd home-agent-lifetime <0-65520>: Router Advertisement.
279: (line 120)
280: * ipv6 nd home-agent-preference <0-65535>: Router Advertisement.
281: (line 109)
282: * ipv6 nd managed-config-flag: Router Advertisement.
283: (line 84)
284: * ipv6 nd mtu <1-65535>: Router Advertisement.
285: (line 146)
286: * ipv6 nd other-config-flag: Router Advertisement.
287: (line 93)
288: * ipv6 nd prefix IPV6PREFIX [VALID-LIFETIME] [PREFERRED-LIFETIME] [off-link] [no-autoconfig] [router-address]: Router Advertisement.
289: (line 14)
290: * ipv6 nd ra-interval <1-1800>: Router Advertisement.
291: (line 49)
292: * ipv6 nd ra-interval msec <70-1800000>: Router Advertisement.
293: (line 56)
294: * ipv6 nd ra-lifetime <0-9000>: Router Advertisement.
295: (line 63)
296: * ipv6 nd reachable-time <1-3600000>: Router Advertisement.
297: (line 75)
298: * ipv6 nd router-preference (high|medium|low): Router Advertisement.
299: (line 139)
300: * ipv6 nd suppress-ra: Router Advertisement.
301: (line 10)
302: * ipv6 ospf6 cost COST: OSPF6 interface. (line 7)
303: * ipv6 ospf6 dead-interval DEADINTERVAL: OSPF6 interface. (line 13)
304: * ipv6 ospf6 hello-interval HELLOINTERVAL: OSPF6 interface. (line 10)
305: * ipv6 ospf6 priority PRIORITY: OSPF6 interface. (line 20)
306: * ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL: OSPF6 interface.
307: (line 17)
308: * ipv6 ospf6 transmit-delay TRANSMITDELAY: OSPF6 interface. (line 23)
309: * ipv6 route NETWORK GATEWAY: Static Route Commands.
310: (line 77)
311: * ipv6 route NETWORK GATEWAY DISTANCE: Static Route Commands.
312: (line 78)
313: * line vty: Basic Config Commands.
314: (line 121)
315: * link-detect: Interface Commands. (line 37)
316: * list: Terminal Mode Commands.
317: (line 24)
318: * log facility FACILITY: Basic Config Commands.
319: (line 81)
320: * log file FILENAME: Basic Config Commands.
321: (line 41)
322: * log file FILENAME LEVEL: Basic Config Commands.
323: (line 42)
324: * log monitor: Basic Config Commands.
325: (line 68)
326: * log monitor LEVEL: Basic Config Commands.
327: (line 69)
328: * log record-priority: Basic Config Commands.
329: (line 87)
330: * log stdout: Basic Config Commands.
331: (line 28)
332: * log stdout LEVEL: Basic Config Commands.
333: (line 29)
334: * log syslog: Basic Config Commands.
335: (line 59)
336: * log syslog LEVEL: Basic Config Commands.
337: (line 60)
338: * log timestamp precision <0-6>: Basic Config Commands.
339: (line 97)
340: * log trap LEVEL: Basic Config Commands.
341: (line 17)
342: * log-adjacency-changes [detail]: OSPF router. (line 73)
343: * logmsg LEVEL MESSAGE: Terminal Mode Commands.
344: (line 34)
345: * match as-path WORD: Using AS Path in Route Map.
346: (line 7)
347: * match aspath AS_PATH: Route Map Match Command.
348: (line 13)
349: * match community COMMUNITY_LIST: Route Map Match Command.
350: (line 19)
351: * match community WORD: BGP Community in Route Map.
352: (line 13)
353: * match community WORD exact-match: BGP Community in Route Map.
354: (line 14)
355: * match extcommunity WORD: BGP Extended Communities in Route Map.
356: (line 7)
357: * match interface WORD: RIP route-map. (line 26)
358: * match ip address ACCESS_LIST: Route Map Match Command.
359: (line 7)
360: * match ip address prefix-list WORD: RIP route-map. (line 39)
361: * match ip address WORD: RIP route-map. (line 38)
362: * match ip next-hop IPV4_ADDR: Route Map Match Command.
363: (line 10)
364: * match ip next-hop prefix-list WORD: RIP route-map. (line 43)
365: * match ip next-hop WORD: RIP route-map. (line 42)
366: * match metric <0-4294967295>: RIP route-map. (line 48)
367: * match metric METRIC: Route Map Match Command.
368: (line 16)
369: * match peer {A.B.C.D|X:X::X:X}: Commands for configuring a Route Server.
370: (line 34)
371: * max-metric router-lsa [on-startup|on-shutdown] <5-86400>: OSPF router.
372: (line 130)
373: * max-metric router-lsa administrative: OSPF router. (line 131)
374: * multicast: Interface Commands. (line 27)
375: * neigbor {A.B.C.D|X.X::X.X|peer-group} route-map WORD {import|export}: Commands for configuring a Route Server.
376: (line 29)
377: * neighbor A.B.C.D: RIP Configuration. (line 34)
378: * neighbor A.B.C.D route-server-client: Commands for configuring a Route Server.
379: (line 11)
380: * neighbor PEER default-originate: BGP Peer commands. (line 59)
381: * neighbor PEER description ...: BGP Peer commands. (line 20)
382: * neighbor PEER distribute-list NAME [in|out]: Peer filtering.
383: (line 7)
384: * neighbor PEER dont-capability-negotiate: Capability Negotiation.
385: (line 51)
386: * neighbor PEER ebgp-multihop: BGP Peer commands. (line 17)
387: * neighbor PEER filter-list NAME [in|out]: Peer filtering. (line 13)
388: * neighbor PEER interface IFNAME: BGP Peer commands. (line 33)
1.1.1.4 ! misho 389: * neighbor PEER local-as AS-NUMBER: BGP Peer commands. (line 79)
! 390: * neighbor PEER local-as AS-NUMBER no-prepend: BGP Peer commands.
! 391: (line 80)
! 392: * neighbor PEER local-as AS-NUMBER no-prepend replace-as: BGP Peer commands.
! 393: (line 81)
1.1.1.3 misho 394: * neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 76)
395: * neighbor PEER next-hop-self: BGP Peer commands. (line 43)
396: * neighbor PEER override-capability: Capability Negotiation.
397: (line 67)
398: * neighbor PEER peer-group WORD: BGP Peer Group. (line 10)
399: * neighbor PEER port PORT: BGP Peer commands. (line 65)
400: * neighbor PEER prefix-list NAME [in|out]: Peer filtering. (line 11)
401: * neighbor PEER remote-as ASN: Defining Peer. (line 7)
402: * neighbor PEER route-map NAME [in|out]: Peer filtering. (line 15)
403: * neighbor PEER route-reflector-client: Route Reflector. (line 9)
404: * neighbor PEER send-community: BGP Peer commands. (line 68)
405: * neighbor PEER shutdown: BGP Peer commands. (line 10)
406: * neighbor PEER strict-capability-match: Capability Negotiation.
407: (line 40)
408: * neighbor PEER update-source <IFNAME|ADDRESS>: BGP Peer commands.
409: (line 48)
410: * neighbor PEER version VERSION: BGP Peer commands. (line 24)
411: * neighbor PEER weight WEIGHT: BGP Peer commands. (line 71)
412: * neighbor PEER-GROUP route-server-client: Commands for configuring a Route Server.
413: (line 10)
414: * neighbor WORD peer-group: BGP Peer Group. (line 7)
415: * neighbor X:X::X:X route-server-client: Commands for configuring a Route Server.
416: (line 12)
417: * network A.B.C.D/M: BGP route. (line 7)
418: * network A.B.C.D/M area <0-4294967295>: OSPF router. (line 175)
419: * network A.B.C.D/M area A.B.C.D: OSPF router. (line 174)
420: * network IFNAME <1>: Babel configuration. (line 11)
421: * network IFNAME <2>: ripngd Configuration.
422: (line 18)
423: * network IFNAME: RIP Configuration. (line 27)
424: * network NETWORK <1>: ripngd Configuration.
425: (line 15)
426: * network NETWORK: RIP Configuration. (line 15)
1.1.1.4 ! misho 427: * no agentx: MIB and command reference.
! 428: (line 36)
1.1.1.3 misho 429: * no aggregate-address A.B.C.D/M: Route Aggregation. (line 18)
430: * no area <0-4294967295> authentication: OSPF area. (line 129)
431: * no area <0-4294967295> export-list NAME: OSPF area. (line 87)
432: * no area <0-4294967295> filter-list prefix NAME in: OSPF area.
433: (line 121)
434: * no area <0-4294967295> filter-list prefix NAME out: OSPF area.
435: (line 122)
436: * no area <0-4294967295> import-list NAME: OSPF area. (line 111)
437: * no area <0-4294967295> range A.B.C.D/M: OSPF area. (line 10)
438: * no area <0-4294967295> shortcut: OSPF area. (line 57)
439: * no area <0-4294967295> stub: OSPF area. (line 64)
440: * no area <0-4294967295> stub no-summary: OSPF area. (line 76)
441: * no area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 52)
442: * no area A.B.C.D authentication: OSPF area. (line 128)
443: * no area A.B.C.D default-cost <0-16777215>: OSPF area. (line 81)
444: * no area A.B.C.D export-list NAME: OSPF area. (line 86)
445: * no area A.B.C.D filter-list prefix NAME in: OSPF area. (line 119)
446: * no area A.B.C.D filter-list prefix NAME out: OSPF area. (line 120)
447: * no area A.B.C.D import-list NAME: OSPF area. (line 110)
448: * no area A.B.C.D range A.B.C.D/M: OSPF area. (line 9)
449: * no area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 29)
450: * no area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
451: (line 36)
452: * no area A.B.C.D shortcut: OSPF area. (line 56)
453: * no area A.B.C.D stub: OSPF area. (line 63)
454: * no area A.B.C.D stub no-summary: OSPF area. (line 75)
455: * no area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 51)
456: * no auto-cost reference-bandwidth: OSPF router. (line 164)
457: * no babel split-horizon: Babel configuration. (line 23)
458: * no bandwidth <1-10000000>: Interface Commands. (line 32)
459: * no banner motd: Basic Config Commands.
460: (line 127)
461: * no bgp multiple-instance: Multiple instance. (line 14)
462: * no debug babel KIND: Babel debugging commands.
463: (line 8)
464: * no debug event: More Show IP BGP. (line 45)
465: * no debug keepalive: More Show IP BGP. (line 49)
466: * no debug ospf ism: Debugging OSPF. (line 14)
467: * no debug ospf ism (status|events|timers): Debugging OSPF. (line 15)
468: * no debug ospf lsa: Debugging OSPF. (line 24)
469: * no debug ospf lsa (generate|flooding|refresh): Debugging OSPF.
470: (line 25)
471: * no debug ospf nsm: Debugging OSPF. (line 19)
472: * no debug ospf nsm (status|events|timers): Debugging OSPF. (line 20)
473: * no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
474: (line 10)
475: * no debug ospf zebra: Debugging OSPF. (line 29)
476: * no debug ospf zebra (interface|redistribute): Debugging OSPF.
477: (line 30)
478: * no debug update: More Show IP BGP. (line 47)
479: * no default-information originate: Redistribute routes to OSPF.
480: (line 50)
481: * no default-metric: Redistribute routes to OSPF.
482: (line 66)
483: * no default-metric <1-16>: RIP Metric Manipulation.
484: (line 12)
485: * no distance <1-255> <1>: Redistribute routes to OSPF.
486: (line 69)
487: * no distance <1-255>: RIP distance. (line 10)
488: * no distance <1-255> A.B.C.D/M: RIP distance. (line 14)
489: * no distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 19)
490: * no distance ospf: Redistribute routes to OSPF.
491: (line 73)
492: * no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
493: (line 60)
494: * no exec-timeout: Basic Config Commands.
495: (line 138)
496: * no ip address ADDRESS/PREFIX: Interface Commands. (line 15)
497: * no ip address ADDRESS/PREFIX secondary: Interface Commands. (line 20)
498: * no ip as-path access-list WORD: AS Path Access List. (line 12)
499: * no ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
500: (line 13)
501: * no ip community-list expanded NAME: BGP Community Lists. (line 37)
502: * no ip community-list NAME: BGP Community Lists. (line 35)
503: * no ip community-list standard NAME: BGP Community Lists. (line 36)
504: * no ip extcommunity-list expanded NAME: BGP Extended Community Lists.
505: (line 29)
506: * no ip extcommunity-list NAME: BGP Extended Community Lists.
507: (line 27)
508: * no ip extcommunity-list standard NAME: BGP Extended Community Lists.
509: (line 28)
510: * no ip ospf authentication-key: OSPF interface. (line 8)
511: * no ip ospf cost: OSPF interface. (line 46)
512: * no ip ospf dead-interval: OSPF interface. (line 53)
513: * no ip ospf hello-interval: OSPF interface. (line 70)
514: * no ip ospf message-digest-key: OSPF interface. (line 34)
515: * no ip ospf network: OSPF interface. (line 81)
516: * no ip ospf priority: OSPF interface. (line 85)
517: * no ip ospf retransmit interval: OSPF interface. (line 92)
518: * no ip ospf transmit-delay: OSPF interface. (line 98)
519: * no ip prefix-list NAME: IP Prefix List. (line 67)
520: * no ip prefix-list NAME description [DESC]: ip prefix-list description.
521: (line 11)
522: * no ip prefix-list sequence-number: ip prefix-list sequential number control.
523: (line 11)
524: * no ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
525: (line 44)
526: * no ip rip authentication mode md5: RIP Authentication. (line 30)
527: * no ip rip authentication mode text: RIP Authentication. (line 34)
528: * no ip rip authentication string STRING: RIP Authentication. (line 38)
529: * no ip split-horizon: RIP Configuration. (line 71)
530: * no ipv6 address ADDRESS/PREFIX: Interface Commands. (line 16)
531: * no ipv6 nd adv-interval-option: Router Advertisement.
532: (line 132)
533: * no ipv6 nd home-agent-config-flag: Router Advertisement.
534: (line 102)
535: * no ipv6 nd home-agent-lifetime [<0-65520>]: Router Advertisement.
536: (line 123)
537: * no ipv6 nd home-agent-preference [<0-65535>]: Router Advertisement.
538: (line 110)
539: * no ipv6 nd managed-config-flag: Router Advertisement.
540: (line 85)
541: * no ipv6 nd mtu [<1-65535>]: Router Advertisement.
542: (line 147)
543: * no ipv6 nd other-config-flag: Router Advertisement.
544: (line 94)
545: * no ipv6 nd ra-interval [<1-1800>]: Router Advertisement.
546: (line 50)
547: * no ipv6 nd ra-interval [msec <70-1800000>]: Router Advertisement.
548: (line 57)
549: * no ipv6 nd ra-lifetime [<0-9000>]: Router Advertisement.
550: (line 64)
551: * no ipv6 nd reachable-time [<1-3600000>]: Router Advertisement.
552: (line 76)
553: * no ipv6 nd router-preference [(high|medium|low)]: Router Advertisement.
554: (line 140)
555: * no ipv6 nd suppress-ra: Router Advertisement.
556: (line 7)
557: * no link-detect: Interface Commands. (line 38)
558: * no log facility: Basic Config Commands.
559: (line 82)
560: * no log file: Basic Config Commands.
561: (line 43)
562: * no log monitor: Basic Config Commands.
563: (line 70)
564: * no log record-priority: Basic Config Commands.
565: (line 88)
566: * no log stdout: Basic Config Commands.
567: (line 30)
568: * no log syslog: Basic Config Commands.
569: (line 61)
570: * no log timestamp precision: Basic Config Commands.
571: (line 98)
572: * no log trap: Basic Config Commands.
573: (line 18)
574: * no log-adjacency-changes [detail]: OSPF router. (line 74)
575: * no max-metric router-lsa [on-startup|on-shutdown|administrative]: OSPF router.
576: (line 133)
577: * no multicast: Interface Commands. (line 28)
578: * no neighbor A.B.C.D: RIP Configuration. (line 35)
579: * no neighbor PEER default-originate: BGP Peer commands. (line 60)
580: * no neighbor PEER description ...: BGP Peer commands. (line 21)
581: * no neighbor PEER dont-capability-negotiate: Capability Negotiation.
582: (line 52)
583: * no neighbor PEER ebgp-multihop: BGP Peer commands. (line 18)
584: * no neighbor PEER interface IFNAME: BGP Peer commands. (line 34)
1.1.1.4 ! misho 585: * no neighbor PEER local-as: BGP Peer commands. (line 82)
1.1.1.3 misho 586: * no neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 77)
587: * no neighbor PEER next-hop-self: BGP Peer commands. (line 44)
588: * no neighbor PEER override-capability: Capability Negotiation.
589: (line 68)
590: * no neighbor PEER route-reflector-client: Route Reflector. (line 10)
591: * no neighbor PEER shutdown: BGP Peer commands. (line 11)
592: * no neighbor PEER strict-capability-match: Capability Negotiation.
593: (line 41)
594: * no neighbor PEER update-source: BGP Peer commands. (line 49)
595: * no neighbor PEER weight WEIGHT: BGP Peer commands. (line 72)
596: * no network A.B.C.D/M: BGP route. (line 16)
597: * no network A.B.C.D/M area <0-4294967295>: OSPF router. (line 177)
598: * no network A.B.C.D/M area A.B.C.D: OSPF router. (line 176)
599: * no network IFNAME <1>: Babel configuration. (line 12)
600: * no network IFNAME: RIP Configuration. (line 28)
601: * no network NETWORK: RIP Configuration. (line 16)
602: * no ospf abr-type TYPE: OSPF router. (line 27)
603: * no ospf rfc1583compatibility: OSPF router. (line 63)
604: * no ospf router-id: OSPF router. (line 17)
605: * no passive-interface IFNAME: RIP Configuration. (line 58)
606: * no passive-interface INTERFACE: OSPF router. (line 80)
607: * no redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
608: (line 22)
609: * no redistribute bgp: How to Announce RIP route.
610: (line 44)
611: * no redistribute connected: How to Announce RIP route.
612: (line 26)
613: * no redistribute kernel: How to Announce RIP route.
614: (line 10)
615: * no redistribute KIND: Babel redistribution.
616: (line 8)
617: * no redistribute ospf: How to Announce RIP route.
618: (line 36)
619: * no redistribute static: How to Announce RIP route.
620: (line 18)
621: * no route A.B.C.D/M: How to Announce RIP route.
622: (line 54)
623: * no router babel: Babel configuration. (line 8)
624: * no router bgp ASN: BGP router. (line 19)
625: * no router ospf: OSPF router. (line 11)
626: * no router rip: RIP Configuration. (line 12)
627: * no shutdown: Interface Commands. (line 10)
628: * no smux peer OID: MIB and command reference.
1.1.1.4 ! misho 629: (line 28)
1.1.1.3 misho 630: * no smux peer OID PASSWORD: MIB and command reference.
1.1.1.4 ! misho 631: (line 31)
1.1.1.3 misho 632: * no timers basic: RIP Timers. (line 31)
633: * no timers throttle spf: OSPF router. (line 92)
634: * no version: RIP Version Control. (line 30)
635: * offset-list ACCESS-LIST (in|out): RIP Metric Manipulation.
636: (line 20)
637: * offset-list ACCESS-LIST (in|out) IFNAME: RIP Metric Manipulation.
638: (line 21)
639: * on-match goto N: Route Map Exit Action Command.
640: (line 11)
641: * on-match next: Route Map Exit Action Command.
642: (line 7)
643: * ospf abr-type TYPE: OSPF router. (line 26)
644: * ospf rfc1583compatibility: OSPF router. (line 62)
645: * ospf router-id A.B.C.D: OSPF router. (line 16)
646: * passive-interface (IFNAME|default): RIP Configuration. (line 57)
647: * passive-interface INTERFACE: OSPF router. (line 79)
648: * password PASSWORD: Basic Config Commands.
649: (line 10)
650: * redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
651: (line 7)
652: * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214>: Redistribute routes to OSPF.
653: (line 15)
654: * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
655: (line 17)
656: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2): Redistribute routes to OSPF.
657: (line 11)
658: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214>: Redistribute routes to OSPF.
659: (line 19)
660: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
661: (line 21)
662: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
663: (line 13)
664: * redistribute (kernel|connected|static|rip|bgp) ROUTE-MAP: Redistribute routes to OSPF.
665: (line 9)
666: * redistribute bgp: How to Announce RIP route.
667: (line 41)
668: * redistribute bgp metric <0-16>: How to Announce RIP route.
669: (line 42)
670: * redistribute bgp route-map ROUTE-MAP: How to Announce RIP route.
671: (line 43)
672: * redistribute connected <1>: Redistribute to BGP. (line 13)
673: * redistribute connected <2>: Redistribute routes to OSPF6.
674: (line 8)
675: * redistribute connected: How to Announce RIP route.
676: (line 23)
677: * redistribute connected metric <0-16>: How to Announce RIP route.
678: (line 24)
679: * redistribute connected route-map ROUTE-MAP: How to Announce RIP route.
680: (line 25)
681: * redistribute kernel <1>: Redistribute to BGP. (line 7)
682: * redistribute kernel: How to Announce RIP route.
683: (line 7)
684: * redistribute kernel metric <0-16>: How to Announce RIP route.
685: (line 8)
686: * redistribute kernel route-map ROUTE-MAP: How to Announce RIP route.
687: (line 9)
688: * redistribute KIND: Babel redistribution.
689: (line 7)
690: * redistribute ospf <1>: Redistribute to BGP. (line 19)
691: * redistribute ospf: How to Announce RIP route.
692: (line 33)
693: * redistribute ospf metric <0-16>: How to Announce RIP route.
694: (line 34)
695: * redistribute ospf route-map ROUTE-MAP: How to Announce RIP route.
696: (line 35)
697: * redistribute rip: Redistribute to BGP. (line 16)
698: * redistribute ripng: Redistribute routes to OSPF6.
699: (line 9)
700: * redistribute static <1>: Redistribute to BGP. (line 10)
701: * redistribute static <2>: Redistribute routes to OSPF6.
702: (line 7)
703: * redistribute static: How to Announce RIP route.
704: (line 15)
705: * redistribute static metric <0-16>: How to Announce RIP route.
706: (line 16)
707: * redistribute static route-map ROUTE-MAP: How to Announce RIP route.
708: (line 17)
709: * route A.B.C.D/M: How to Announce RIP route.
710: (line 53)
711: * route NETWORK: ripngd Configuration.
712: (line 21)
713: * route-map ROUTE-MAP-NAME (permit|deny) ORDER: Route Map Command.
714: (line 7)
715: * router babel: Babel configuration. (line 7)
716: * router bgp AS-NUMBER: BGP instance and view.
717: (line 11)
718: * router bgp AS-NUMBER view NAME: BGP instance and view.
719: (line 28)
720: * router bgp ASN: BGP router. (line 13)
721: * router ospf: OSPF router. (line 10)
722: * router ospf6: OSPF6 router. (line 7)
723: * router rip: RIP Configuration. (line 7)
724: * router ripng: ripngd Configuration.
725: (line 9)
726: * router zebra: ripngd Configuration.
727: (line 24)
728: * router-id A.B.C.D: OSPF6 router. (line 9)
729: * service advanced-vty: Basic Config Commands.
730: (line 114)
731: * service integrated-vtysh-config: VTY shell integrated configuration.
732: (line 7)
733: * service password-encryption: Basic Config Commands.
734: (line 111)
735: * service terminal-length <0-512>: Basic Config Commands.
736: (line 117)
737: * set as-path prepend AS-PATH: Using AS Path in Route Map.
738: (line 9)
739: * set as-path prepend AS_PATH: Route Map Set Command.
740: (line 19)
741: * set comm-list WORD delete: BGP Community in Route Map.
742: (line 34)
743: * set community COMMUNITY <1>: Route Map Set Command.
744: (line 22)
745: * set community COMMUNITY: BGP Community in Route Map.
746: (line 23)
747: * set community COMMUNITY additive: BGP Community in Route Map.
748: (line 24)
749: * set community none: BGP Community in Route Map.
750: (line 22)
751: * set extcommunity rt EXTCOMMUNITY: BGP Extended Communities in Route Map.
752: (line 9)
753: * set extcommunity soo EXTCOMMUNITY: BGP Extended Communities in Route Map.
754: (line 12)
755: * set ip next-hop A.B.C.D: RIP route-map. (line 53)
756: * set ip next-hop IPV4_ADDRESS: Route Map Set Command.
757: (line 7)
758: * set ipv6 next-hop global IPV6_ADDRESS: Route Map Set Command.
759: (line 25)
760: * set ipv6 next-hop local IPV6_ADDRESS: Route Map Set Command.
761: (line 28)
762: * set local-preference LOCAL_PREF: Route Map Set Command.
763: (line 10)
764: * set metric <0-4294967295>: RIP route-map. (line 58)
765: * set metric METRIC: Route Map Set Command.
766: (line 16)
767: * set src ADDRESS: zebra Route Filtering.
768: (line 17)
769: * set weight WEIGHT: Route Map Set Command.
770: (line 13)
771: * show babel database: Show Babel information.
772: (line 7)
773: * show babel interface: Show Babel information.
774: (line 8)
775: * show babel neighbour: Show Babel information.
776: (line 9)
777: * show babel parameters: Show Babel information.
778: (line 10)
779: * show debug: More Show IP BGP. (line 37)
780: * show debugging ospf: Debugging OSPF. (line 32)
781: * show debugging rip: RIP Debug Commands. (line 29)
782: * show debugging ripng: ripngd Terminal Mode Commands.
783: (line 9)
784: * show interface: zebra Terminal Mode Commands.
785: (line 21)
786: * show ip bgp: Show IP BGP. (line 7)
787: * show ip bgp A.B.C.D: Show IP BGP. (line 8)
788: * show ip bgp community: Display BGP Routes by Community.
789: (line 11)
790: * show ip bgp community COMMUNITY <1>: More Show IP BGP. (line 11)
791: * show ip bgp community COMMUNITY: Display BGP Routes by Community.
792: (line 12)
793: * show ip bgp community COMMUNITY exact-match <1>: More Show IP BGP.
794: (line 12)
795: * show ip bgp community COMMUNITY exact-match: Display BGP Routes by Community.
796: (line 13)
797: * show ip bgp community-list WORD <1>: More Show IP BGP. (line 16)
798: * show ip bgp community-list WORD: Display BGP Routes by Community.
799: (line 20)
800: * show ip bgp community-list WORD exact-match <1>: More Show IP BGP.
801: (line 17)
802: * show ip bgp community-list WORD exact-match: Display BGP Routes by Community.
803: (line 21)
804: * show ip bgp dampened-paths: More Show IP BGP. (line 31)
805: * show ip bgp flap-statistics: More Show IP BGP. (line 34)
806: * show ip bgp neighbor [PEER]: More Show IP BGP. (line 23)
807: * show ip bgp regexp LINE <1>: More Show IP BGP. (line 7)
808: * show ip bgp regexp LINE: Display BGP Routes by AS Path.
809: (line 10)
810: * show ip bgp summary: More Show IP BGP. (line 21)
811: * show ip bgp view NAME: Viewing the view. (line 9)
812: * show ip bgp X:X::X:X: Show IP BGP. (line 9)
813: * show ip community-list: BGP Community Lists. (line 42)
814: * show ip community-list NAME: BGP Community Lists. (line 43)
815: * show ip extcommunity-list: BGP Extended Community Lists.
816: (line 35)
817: * show ip extcommunity-list NAME: BGP Extended Community Lists.
818: (line 36)
819: * show ip ospf: Showing OSPF information.
820: (line 7)
821: * show ip ospf database: Showing OSPF information.
822: (line 20)
823: * show ip ospf database (asbr-summary|external|network|router|summary): Showing OSPF information.
824: (line 23)
825: * show ip ospf database (asbr-summary|external|network|router|summary) adv-router ADV-ROUTER: Showing OSPF information.
826: (line 30)
827: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID: Showing OSPF information.
828: (line 25)
829: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID adv-router ADV-ROUTER: Showing OSPF information.
830: (line 28)
831: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID self-originate: Showing OSPF information.
832: (line 33)
833: * show ip ospf database (asbr-summary|external|network|router|summary) self-originate: Showing OSPF information.
834: (line 35)
835: * show ip ospf database max-age: Showing OSPF information.
836: (line 37)
837: * show ip ospf database self-originate: Showing OSPF information.
838: (line 39)
839: * show ip ospf interface [INTERFACE]: Showing OSPF information.
840: (line 11)
841: * show ip ospf neighbor: Showing OSPF information.
842: (line 15)
843: * show ip ospf neighbor detail: Showing OSPF information.
844: (line 17)
845: * show ip ospf neighbor INTERFACE: Showing OSPF information.
846: (line 16)
847: * show ip ospf neighbor INTERFACE detail: Showing OSPF information.
848: (line 18)
849: * show ip ospf route: Showing OSPF information.
850: (line 41)
851: * show ip prefix-list: Showing ip prefix-list.
852: (line 7)
853: * show ip prefix-list [NAME]: zebra Terminal Mode Commands.
854: (line 23)
855: * show ip prefix-list detail: Showing ip prefix-list.
856: (line 31)
857: * show ip prefix-list detail NAME: Showing ip prefix-list.
858: (line 33)
859: * show ip prefix-list NAME: Showing ip prefix-list.
860: (line 10)
861: * show ip prefix-list NAME A.B.C.D/M: Showing ip prefix-list.
862: (line 17)
863: * show ip prefix-list NAME A.B.C.D/M first-match: Showing ip prefix-list.
864: (line 25)
865: * show ip prefix-list NAME A.B.C.D/M longer: Showing ip prefix-list.
866: (line 23)
867: * show ip prefix-list NAME seq NUM: Showing ip prefix-list.
868: (line 13)
869: * show ip prefix-list summary: Showing ip prefix-list.
870: (line 27)
871: * show ip prefix-list summary NAME: Showing ip prefix-list.
872: (line 29)
873: * show ip protocol: zebra Terminal Mode Commands.
874: (line 27)
875: * show ip protocols: Show RIP Information.
876: (line 17)
877: * show ip rip: Show RIP Information.
878: (line 9)
879: * show ip ripng: ripngd Terminal Mode Commands.
880: (line 7)
881: * show ip route: zebra Terminal Mode Commands.
882: (line 7)
883: * show ipforward: zebra Terminal Mode Commands.
884: (line 29)
885: * show ipv6 ospf6 [INSTANCE_ID]: Showing OSPF6 information.
886: (line 7)
887: * show ipv6 ospf6 database: Showing OSPF6 information.
888: (line 11)
889: * show ipv6 ospf6 interface: Showing OSPF6 information.
890: (line 15)
891: * show ipv6 ospf6 neighbor: Showing OSPF6 information.
892: (line 18)
893: * show ipv6 ospf6 request-list A.B.C.D: Showing OSPF6 information.
894: (line 21)
895: * show ipv6 route: zebra Terminal Mode Commands.
896: (line 19)
897: * show ipv6 route ospf6: Showing OSPF6 information.
898: (line 24)
899: * show ipv6forward: zebra Terminal Mode Commands.
900: (line 34)
901: * show logging: Terminal Mode Commands.
902: (line 30)
903: * show route-map [NAME]: zebra Terminal Mode Commands.
904: (line 25)
905: * show version: Terminal Mode Commands.
906: (line 27)
1.1.1.4 ! misho 907: * show zebra fpm stats: zebra Terminal Mode Commands.
! 908: (line 37)
1.1.1.3 misho 909: * shutdown: Interface Commands. (line 9)
910: * smux peer OID: MIB and command reference.
1.1.1.4 ! misho 911: (line 27)
1.1.1.3 misho 912: * smux peer OID PASSWORD: MIB and command reference.
1.1.1.4 ! misho 913: (line 30)
1.1.1.3 misho 914: * table TABLENO: Static Route Commands.
915: (line 81)
916: * terminal length <0-512>: Terminal Mode Commands.
917: (line 17)
918: * timers basic UPDATE TIMEOUT GARBAGE: RIP Timers. (line 7)
919: * timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME: OSPF router.
920: (line 91)
921: * username USERNAME nopassword: VTY shell username. (line 7)
922: * version VERSION: RIP Version Control. (line 20)
923: * who: Terminal Mode Commands.
924: (line 21)
925: * write file: Terminal Mode Commands.
926: (line 10)
927: * write terminal: Terminal Mode Commands.
928: (line 7)
929:
930:
931: File: quagga.info, Node: VTY Key Index, Next: Index, Prev: Command Index, Up: Top
932:
933: VTY Key Index
934: *************
935:
936: [index ]
937: * Menu:
938:
939: * <DEL>: CLI Editing Commands. (line 11)
940: * <DOWN>: CLI Advanced Commands.
941: (line 17)
942: * <LEFT>: CLI Movement Commands.
943: (line 15)
944: * <RIGHT>: CLI Movement Commands.
945: (line 11)
946: * <TAB>: CLI Advanced Commands.
947: (line 24)
948: * <UP>: CLI Advanced Commands.
949: (line 21)
950: * ?: CLI Advanced Commands.
951: (line 27)
952: * C-a: CLI Movement Commands.
953: (line 24)
954: * C-b: CLI Movement Commands.
955: (line 15)
956: * C-c: CLI Advanced Commands.
957: (line 10)
958: * C-d: CLI Editing Commands. (line 14)
959: * C-e: CLI Movement Commands.
960: (line 27)
961: * C-f: CLI Movement Commands.
962: (line 11)
963: * C-h: CLI Editing Commands. (line 11)
964: * C-k: CLI Editing Commands. (line 23)
965: * C-n: CLI Advanced Commands.
966: (line 17)
967: * C-p: CLI Advanced Commands.
968: (line 21)
969: * C-t: CLI Editing Commands. (line 29)
970: * C-u: CLI Editing Commands. (line 26)
971: * C-w: CLI Editing Commands. (line 20)
972: * C-z: CLI Advanced Commands.
973: (line 13)
974: * M-b: CLI Movement Commands.
975: (line 21)
976: * M-d: CLI Editing Commands. (line 17)
977: * M-f: CLI Movement Commands.
978: (line 18)
979:
980:
1.1 misho 981: File: quagga.info, Node: Index, Prev: VTY Key Index, Up: Top
982:
983: Index
984: *****
985:
986: [index ]
987: * Menu:
988:
989: * About Quagga: About Quagga. (line 6)
990: * Bug hunting: Bug Reports. (line 6)
991: * Bug Reports: Bug Reports. (line 6)
992: * Build options: The Configure script and its options.
993: (line 6)
994: * Building on Linux boxes: Linux notes. (line 6)
995: * Building the system: Installation. (line 6)
996: * Compatibility with other systems: Supported Platforms. (line 6)
997: * Configuration files for running the software: Config Commands.
998: (line 6)
999: * Configuration options: The Configure script and its options.
1000: (line 6)
1001: * Configuring Quagga: Linux notes. (line 6)
1002: * Contact information: Mailing List. (line 6)
1003: * Distribution configuration: The Configure script and its options.
1004: (line 6)
1005: * Errors in the software: Bug Reports. (line 6)
1006: * Files for running configurations: Config Commands. (line 6)
1007: * Found a bug?: Bug Reports. (line 6)
1008: * Getting the herd running: Config Commands. (line 6)
1009: * How to get in touch with Quagga: Mailing List. (line 6)
1010: * How to install Quagga: Installation. (line 6)
1011: * Installation: Installation. (line 6)
1012: * Installing Quagga: Installation. (line 6)
1013: * Linux configurations: Linux notes. (line 6)
1014: * Mailing lists: Mailing List. (line 6)
1015: * Mailing Quagga: Mailing List. (line 6)
1016: * Making Quagga: Installation. (line 6)
1017: * Modifying the herd's behavior: Config Commands. (line 6)
1018: * Operating systems that support Quagga: Supported Platforms. (line 6)
1019: * Options for configuring: The Configure script and its options.
1020: (line 6)
1021: * Options to ./configure: The Configure script and its options.
1022: (line 6)
1023: * OSPFv2: ripngd Filtering Commands.
1024: (line 14)
1025: * Overview: Overview. (line 6)
1026: * Quagga Least-Privileges: Least-Privilege support.
1027: (line 6)
1028: * Quagga on other systems: Supported Platforms. (line 6)
1029: * Quagga Privileges: Least-Privilege support.
1030: (line 6)
1031: * Reporting bugs: Bug Reports. (line 6)
1032: * Reporting software errors: Bug Reports. (line 6)
1033: * Software architecture: System Architecture. (line 6)
1034: * Software internals: System Architecture. (line 6)
1035: * Supported platforms: Supported Platforms. (line 6)
1036: * System architecture: System Architecture. (line 6)
1037:
1038: