Annotation of embedaddon/quagga/doc/quagga.info-2, revision 1.1.1.5
1.1 misho 1: This is quagga.info, produced by makeinfo version 4.13 from quagga.texi.
2:
3: Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
4:
5: Permission is granted to make and distribute verbatim copies of
6: this manual provided the copyright notice and this permission
7: notice are preserved on all copies.
8:
9: Permission is granted to copy and distribute modified versions of
10: this manual under the conditions for verbatim copying, provided
11: that the entire resulting derived work is distributed under the
12: terms of a permission notice identical to this one.
13:
14: Permission is granted to copy and distribute translations of this
15: manual into another language, under the above conditions for
16: modified versions, except that this permission notice may be
17: stated in a translation approved by Kunihiro Ishiguro.
18:
19: INFO-DIR-SECTION Routing Software:
20: START-INFO-DIR-ENTRY
21: * Quagga: (quagga). The Quagga Software Routing Suite
22: END-INFO-DIR-ENTRY
23:
24: This file documents the Quagga Software Routing Suite which manages
25: common TCP/IP routing protocols.
26:
1.1.1.5 ! misho 27: This is Edition 1.0.20160315, last updated 15 March 2016 of `The
! 28: Quagga Manual', for Quagga Version 1.0.20160315.
1.1 misho 29:
30: Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
31:
32: Permission is granted to make and distribute verbatim copies of
33: this manual provided the copyright notice and this permission
34: notice are preserved on all copies.
35:
36: Permission is granted to copy and distribute modified versions of
37: this manual under the conditions for verbatim copying, provided
38: that the entire resulting derived work is distributed under the
39: terms of a permission notice identical to this one.
40:
41: Permission is granted to copy and distribute translations of this
42: manual into another language, under the above conditions for
43: modified versions, except that this permission notice may be
44: stated in a translation approved by Kunihiro Ishiguro.
45:
46:
1.1.1.3 misho 47: File: quagga.info, Node: Command Index, Next: VTY Key Index, Prev: Packet Binary Dump Format, Up: Top
48:
49: Command Index
50: *************
51:
52: [index ]
53: * Menu:
54:
55: * access-class ACCESS-LIST: Basic Config Commands.
56: (line 142)
57: * access-list NAME deny IPV4-NETWORK: IP Access List. (line 8)
58: * access-list NAME permit IPV4-NETWORK: IP Access List. (line 7)
1.1.1.4 misho 59: * agentx: MIB and command reference.
60: (line 35)
1.1.1.3 misho 61: * aggregate-address A.B.C.D/M: Route Aggregation. (line 7)
62: * aggregate-address A.B.C.D/M as-set: Route Aggregation. (line 10)
63: * aggregate-address A.B.C.D/M summary-only: Route Aggregation.
64: (line 14)
65: * area <0-4294967295> authentication: OSPF area. (line 127)
66: * area <0-4294967295> authentication message-digest: OSPF area.
67: (line 134)
68: * area <0-4294967295> export-list NAME: OSPF area. (line 85)
69: * area <0-4294967295> filter-list prefix NAME in: OSPF area. (line 117)
70: * area <0-4294967295> filter-list prefix NAME out: OSPF area. (line 118)
71: * area <0-4294967295> import-list NAME: OSPF area. (line 109)
72: * area <0-4294967295> range A.B.C.D/M: OSPF area. (line 8)
73: * area <0-4294967295> shortcut: OSPF area. (line 55)
74: * area <0-4294967295> stub: OSPF area. (line 62)
75: * area <0-4294967295> stub no-summary: OSPF area. (line 74)
76: * area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 50)
77: * area A.B.C.D authentication: OSPF area. (line 126)
78: * area A.B.C.D authentication message-digest: OSPF area. (line 133)
79: * area A.B.C.D default-cost <0-16777215>: OSPF area. (line 80)
80: * area A.B.C.D export-list NAME: OSPF area. (line 84)
81: * area A.B.C.D filter-list prefix NAME in: OSPF area. (line 115)
82: * area A.B.C.D filter-list prefix NAME out: OSPF area. (line 116)
83: * area A.B.C.D import-list NAME: OSPF area. (line 108)
84: * area A.B.C.D range A.B.C.D/M: OSPF area. (line 7)
85: * area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 28)
86: * area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
87: (line 34)
88: * area A.B.C.D shortcut: OSPF area. (line 54)
89: * area A.B.C.D stub: OSPF area. (line 61)
90: * area A.B.C.D stub no-summary: OSPF area. (line 73)
91: * area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 49)
92: * auto-cost reference-bandwidth <1-4294967>: OSPF router. (line 163)
1.1.1.5 ! misho 93: * auto-cost reference-bandwidth COST: OSPF6 router. (line 51)
1.1.1.3 misho 94: * bandwidth <1-10000000>: Interface Commands. (line 31)
95: * banner motd default: Basic Config Commands.
96: (line 124)
1.1.1.5 ! misho 97: * bgp always-compare-med: BGP MED. (line 230)
1.1.1.3 misho 98: * bgp bestpath as-path confed: BGP decision process.
1.1.1.5 ! misho 99: (line 66)
! 100: * bgp bestpath as-path multipath-relax: BGP decision process.
! 101: (line 71)
! 102: * bgp bestpath compare-routerid: BGP decision process.
! 103: (line 77)
1.1.1.3 misho 104: * bgp cluster-id A.B.C.D: Route Reflector. (line 7)
105: * bgp config-type cisco: Multiple instance. (line 20)
106: * bgp config-type zebra: Multiple instance. (line 53)
107: * bgp dampening <1-45> <1-20000> <1-20000> <1-255>: BGP route flap dampening.
108: (line 7)
1.1.1.5 ! misho 109: * bgp deterministic-med: BGP MED. (line 212)
1.1.1.3 misho 110: * bgp multiple-instance: Multiple instance. (line 10)
111: * bgp router-id A.B.C.D: BGP router. (line 22)
112: * call NAME: Route Map Call Command.
113: (line 7)
114: * call WORD: Commands for configuring a Route Server.
115: (line 52)
116: * clear ip bgp PEER: More Show IP BGP. (line 25)
117: * clear ip bgp PEER soft in: More Show IP BGP. (line 28)
118: * clear ip prefix-list: Clear counter of ip prefix-list.
119: (line 7)
120: * clear ip prefix-list NAME: Clear counter of ip prefix-list.
121: (line 11)
122: * clear ip prefix-list NAME A.B.C.D/M: Clear counter of ip prefix-list.
123: (line 13)
1.1.1.4 misho 124: * clear zebra fpm stats: zebra Terminal Mode Commands.
125: (line 41)
1.1.1.3 misho 126: * configure terminal: Terminal Mode Commands.
127: (line 13)
128: * continue: Route Map Exit Action Command.
129: (line 8)
130: * continue N: Route Map Exit Action Command.
131: (line 12)
132: * debug event: More Show IP BGP. (line 39)
133: * debug keepalive: More Show IP BGP. (line 43)
134: * debug ospf ism: Debugging OSPF. (line 12)
135: * debug ospf ism (status|events|timers): Debugging OSPF. (line 13)
136: * debug ospf lsa: Debugging OSPF. (line 22)
137: * debug ospf lsa (generate|flooding|refresh): Debugging OSPF. (line 23)
138: * debug ospf nsm: Debugging OSPF. (line 17)
139: * debug ospf nsm (status|events|timers): Debugging OSPF. (line 18)
140: * debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
141: (line 8)
142: * debug ospf zebra: Debugging OSPF. (line 27)
143: * debug ospf zebra (interface|redistribute): Debugging OSPF. (line 28)
144: * debug rip events: RIP Debug Commands. (line 9)
145: * debug rip packet: RIP Debug Commands. (line 15)
146: * debug rip zebra: RIP Debug Commands. (line 22)
147: * debug ripng events: ripngd Terminal Mode Commands.
148: (line 11)
149: * debug ripng packet: ripngd Terminal Mode Commands.
150: (line 13)
151: * debug ripng zebra: ripngd Terminal Mode Commands.
152: (line 15)
153: * debug update: More Show IP BGP. (line 41)
154: * default-information originate <1>: Redistribute routes to OSPF.
155: (line 37)
156: * default-information originate: How to Announce RIP route.
157: (line 51)
158: * default-information originate always: Redistribute routes to OSPF.
159: (line 43)
160: * default-information originate always metric <0-16777214>: Redistribute routes to OSPF.
161: (line 45)
162: * default-information originate always metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
163: (line 47)
164: * default-information originate always metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
165: (line 49)
166: * default-information originate metric <0-16777214>: Redistribute routes to OSPF.
167: (line 38)
168: * default-information originate metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
169: (line 40)
170: * default-information originate metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
171: (line 42)
172: * default-metric <0-16777214>: Redistribute routes to OSPF.
173: (line 65)
174: * default-metric <1-16>: RIP Metric Manipulation.
175: (line 11)
176: * description DESCRIPTION ...: Interface Commands. (line 24)
177: * distance <1-255> <1>: Redistribute routes to OSPF.
178: (line 68)
179: * distance <1-255>: RIP distance. (line 9)
180: * distance <1-255> A.B.C.D/M <1>: BGP distance. (line 12)
181: * distance <1-255> A.B.C.D/M: RIP distance. (line 13)
182: * distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 18)
183: * distance <1-255> A.B.C.D/M WORD: BGP distance. (line 13)
184: * distance bgp <1-255> <1-255> <1-255>: BGP distance. (line 7)
185: * distance ospf (intra-area|inter-area|external) <1-255>: Redistribute routes to OSPF.
186: (line 72)
187: * distribute-list ACCESS_LIST (in|out) IFNAME: ripngd Filtering Commands.
188: (line 7)
189: * distribute-list ACCESS_LIST DIRECT IFNAME: Filtering RIP Routes.
190: (line 9)
191: * distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
192: (line 58)
193: * distribute-list prefix PREFIX_LIST (in|out) IFNAME: Filtering RIP Routes.
194: (line 32)
1.1.1.5 ! misho 195: * dump bgp all PATH [INTERVAL]: Dump BGP packets and table.
1.1.1.3 misho 196: (line 7)
1.1.1.5 ! misho 197: * dump bgp all-et PATH [INTERVAL]: Dump BGP packets and table.
1.1.1.3 misho 198: (line 8)
1.1.1.5 ! misho 199: * dump bgp routes-mrt PATH: Dump BGP packets and table.
! 200: (line 25)
! 201: * dump bgp routes-mrt PATH INTERVAL: Dump BGP packets and table.
! 202: (line 26)
! 203: * dump bgp updates PATH [INTERVAL]: Dump BGP packets and table.
! 204: (line 16)
! 205: * dump bgp updates-et PATH [INTERVAL]: Dump BGP packets and table.
! 206: (line 17)
1.1.1.3 misho 207: * enable password PASSWORD: Basic Config Commands.
208: (line 14)
209: * exec-timeout MINUTE: Basic Config Commands.
210: (line 130)
211: * exec-timeout MINUTE SECOND: Basic Config Commands.
212: (line 131)
213: * flush_timer TIME: ripngd Configuration.
214: (line 12)
215: * hostname HOSTNAME: Basic Config Commands.
216: (line 7)
217: * interface IFNAME: Interface Commands. (line 7)
218: * interface IFNAME area AREA: OSPF6 router. (line 12)
219: * ip address ADDRESS/PREFIX: Interface Commands. (line 13)
220: * ip address ADDRESS/PREFIX secondary: Interface Commands. (line 19)
221: * ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
222: (line 9)
223: * ip community-list <1-99> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
224: (line 14)
225: * ip community-list <100-199> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
226: (line 20)
227: * ip community-list expanded NAME {permit|deny} LINE: BGP Community Lists.
228: (line 30)
229: * ip community-list NAME {permit|deny} COMMUNITY: Numbered BGP Community Lists.
230: (line 25)
231: * ip community-list standard NAME {permit|deny} COMMUNITY: BGP Community Lists.
232: (line 20)
233: * ip extcommunity-list expanded NAME {permit|deny} LINE: BGP Extended Community Lists.
234: (line 21)
235: * ip extcommunity-list standard NAME {permit|deny} EXTCOMMUNITY: BGP Extended Community Lists.
236: (line 10)
1.1.1.5 ! misho 237: * ip mroute PREFIX NEXTHOP [DISTANCE]: Multicast RIB Commands.
! 238: (line 72)
! 239: * ip multicast rpf-lookup-mode MODE: Multicast RIB Commands.
! 240: (line 19)
! 241: * ip ospf area AREA [ADDR]: OSPF interface. (line 7)
! 242: * ip ospf authentication message-digest: OSPF interface. (line 29)
! 243: * ip ospf authentication-key AUTH_KEY: OSPF interface. (line 19)
! 244: * ip ospf cost <1-65535>: OSPF interface. (line 57)
! 245: * ip ospf dead-interval <1-65535>: OSPF interface. (line 62)
1.1.1.3 misho 246: * ip ospf dead-interval minimal hello-multiplier <2-20>: OSPF interface.
1.1.1.5 ! misho 247: (line 64)
! 248: * ip ospf hello-interval <1-65535>: OSPF interface. (line 81)
! 249: * ip ospf message-digest-key KEYID md5 KEY: OSPF interface. (line 45)
1.1.1.3 misho 250: * ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point): OSPF interface.
1.1.1.5 ! misho 251: (line 92)
! 252: * ip ospf priority <0-255>: OSPF interface. (line 96)
! 253: * ip ospf retransmit-interval <1-65535>: OSPF interface. (line 103)
! 254: * ip ospf transmit-delay: OSPF interface. (line 109)
1.1.1.3 misho 255: * ip prefix-list NAME (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
256: (line 16)
257: * ip prefix-list NAME description DESC: ip prefix-list description.
258: (line 7)
259: * ip prefix-list NAME seq NUMBER (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
260: (line 18)
261: * ip prefix-list sequence-number: ip prefix-list sequential number control.
262: (line 7)
263: * ip protocol PROTOCOL route-map ROUTEMAP: zebra Route Filtering.
264: (line 12)
265: * ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
266: (line 43)
267: * ip rip authentication mode md5: RIP Authentication. (line 29)
268: * ip rip authentication mode text: RIP Authentication. (line 33)
269: * ip rip authentication string STRING: RIP Authentication. (line 37)
270: * ip rip receive version VERSION: RIP Version Control. (line 44)
271: * ip rip send version VERSION: RIP Version Control. (line 33)
272: * ip route NETWORK GATEWAY: Static Route Commands.
273: (line 10)
274: * ip route NETWORK GATEWAY DISTANCE: Static Route Commands.
275: (line 36)
276: * ip route NETWORK NETMASK GATEWAY: Static Route Commands.
277: (line 25)
278: * ip split-horizon: RIP Configuration. (line 70)
279: * ipv6 address ADDRESS/PREFIX: Interface Commands. (line 14)
280: * ipv6 nd adv-interval-option: Router Advertisement.
1.1.1.5 ! misho 281: (line 127)
1.1.1.3 misho 282: * ipv6 nd home-agent-config-flag: Router Advertisement.
283: (line 101)
284: * ipv6 nd home-agent-lifetime <0-65520>: Router Advertisement.
1.1.1.5 ! misho 285: (line 118)
1.1.1.3 misho 286: * ipv6 nd home-agent-preference <0-65535>: Router Advertisement.
287: (line 109)
288: * ipv6 nd managed-config-flag: Router Advertisement.
289: (line 84)
290: * ipv6 nd mtu <1-65535>: Router Advertisement.
1.1.1.5 ! misho 291: (line 142)
1.1.1.3 misho 292: * ipv6 nd other-config-flag: Router Advertisement.
293: (line 93)
294: * ipv6 nd prefix IPV6PREFIX [VALID-LIFETIME] [PREFERRED-LIFETIME] [off-link] [no-autoconfig] [router-address]: Router Advertisement.
295: (line 14)
296: * ipv6 nd ra-interval <1-1800>: Router Advertisement.
297: (line 49)
298: * ipv6 nd ra-interval msec <70-1800000>: Router Advertisement.
299: (line 56)
300: * ipv6 nd ra-lifetime <0-9000>: Router Advertisement.
301: (line 63)
302: * ipv6 nd reachable-time <1-3600000>: Router Advertisement.
303: (line 75)
304: * ipv6 nd router-preference (high|medium|low): Router Advertisement.
1.1.1.5 ! misho 305: (line 135)
1.1.1.3 misho 306: * ipv6 nd suppress-ra: Router Advertisement.
307: (line 10)
308: * ipv6 ospf6 cost COST: OSPF6 interface. (line 7)
1.1.1.5 ! misho 309: * ipv6 ospf6 dead-interval DEADINTERVAL: OSPF6 interface. (line 14)
! 310: * ipv6 ospf6 hello-interval HELLOINTERVAL: OSPF6 interface. (line 11)
! 311: * ipv6 ospf6 network (broadcast|point-to-point): OSPF6 interface.
! 312: (line 27)
! 313: * ipv6 ospf6 priority PRIORITY: OSPF6 interface. (line 21)
1.1.1.3 misho 314: * ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL: OSPF6 interface.
1.1.1.5 ! misho 315: (line 18)
! 316: * ipv6 ospf6 transmit-delay TRANSMITDELAY: OSPF6 interface. (line 24)
1.1.1.3 misho 317: * ipv6 route NETWORK GATEWAY: Static Route Commands.
318: (line 77)
319: * ipv6 route NETWORK GATEWAY DISTANCE: Static Route Commands.
320: (line 78)
321: * line vty: Basic Config Commands.
322: (line 121)
323: * link-detect: Interface Commands. (line 37)
324: * list: Terminal Mode Commands.
325: (line 24)
326: * log facility FACILITY: Basic Config Commands.
327: (line 81)
328: * log file FILENAME: Basic Config Commands.
329: (line 41)
330: * log file FILENAME LEVEL: Basic Config Commands.
331: (line 42)
332: * log monitor: Basic Config Commands.
333: (line 68)
334: * log monitor LEVEL: Basic Config Commands.
335: (line 69)
336: * log record-priority: Basic Config Commands.
337: (line 87)
338: * log stdout: Basic Config Commands.
339: (line 28)
340: * log stdout LEVEL: Basic Config Commands.
341: (line 29)
342: * log syslog: Basic Config Commands.
343: (line 59)
344: * log syslog LEVEL: Basic Config Commands.
345: (line 60)
346: * log timestamp precision <0-6>: Basic Config Commands.
347: (line 97)
348: * log trap LEVEL: Basic Config Commands.
349: (line 17)
350: * log-adjacency-changes [detail]: OSPF router. (line 73)
351: * logmsg LEVEL MESSAGE: Terminal Mode Commands.
352: (line 34)
353: * match as-path WORD: Using AS Path in Route Map.
354: (line 7)
355: * match aspath AS_PATH: Route Map Match Command.
356: (line 13)
357: * match community COMMUNITY_LIST: Route Map Match Command.
358: (line 19)
359: * match community WORD: BGP Community in Route Map.
360: (line 13)
361: * match community WORD exact-match: BGP Community in Route Map.
362: (line 14)
363: * match extcommunity WORD: BGP Extended Communities in Route Map.
364: (line 7)
365: * match interface WORD: RIP route-map. (line 26)
366: * match ip address ACCESS_LIST: Route Map Match Command.
367: (line 7)
368: * match ip address prefix-list WORD: RIP route-map. (line 39)
369: * match ip address WORD: RIP route-map. (line 38)
370: * match ip next-hop IPV4_ADDR: Route Map Match Command.
371: (line 10)
372: * match ip next-hop prefix-list WORD: RIP route-map. (line 43)
373: * match ip next-hop WORD: RIP route-map. (line 42)
374: * match metric <0-4294967295>: RIP route-map. (line 48)
375: * match metric METRIC: Route Map Match Command.
376: (line 16)
377: * match peer {A.B.C.D|X:X::X:X}: Commands for configuring a Route Server.
378: (line 34)
379: * max-metric router-lsa [on-startup|on-shutdown] <5-86400>: OSPF router.
380: (line 130)
381: * max-metric router-lsa administrative: OSPF router. (line 131)
382: * multicast: Interface Commands. (line 27)
383: * neigbor {A.B.C.D|X.X::X.X|peer-group} route-map WORD {import|export}: Commands for configuring a Route Server.
384: (line 29)
385: * neighbor A.B.C.D: RIP Configuration. (line 34)
386: * neighbor A.B.C.D route-server-client: Commands for configuring a Route Server.
387: (line 11)
1.1.1.5 ! misho 388: * neighbor PEER default-originate: BGP Peer commands. (line 61)
1.1.1.3 misho 389: * neighbor PEER description ...: BGP Peer commands. (line 20)
390: * neighbor PEER distribute-list NAME [in|out]: Peer filtering.
391: (line 7)
392: * neighbor PEER dont-capability-negotiate: Capability Negotiation.
393: (line 51)
394: * neighbor PEER ebgp-multihop: BGP Peer commands. (line 17)
395: * neighbor PEER filter-list NAME [in|out]: Peer filtering. (line 13)
396: * neighbor PEER interface IFNAME: BGP Peer commands. (line 33)
1.1.1.5 ! misho 397: * neighbor PEER local-as AS-NUMBER: BGP Peer commands. (line 81)
1.1.1.4 misho 398: * neighbor PEER local-as AS-NUMBER no-prepend: BGP Peer commands.
1.1.1.5 ! misho 399: (line 82)
1.1.1.4 misho 400: * neighbor PEER local-as AS-NUMBER no-prepend replace-as: BGP Peer commands.
1.1.1.5 ! misho 401: (line 83)
! 402: * neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 78)
! 403: * neighbor PEER next-hop-self [all]: BGP Peer commands. (line 43)
1.1.1.3 misho 404: * neighbor PEER override-capability: Capability Negotiation.
405: (line 67)
406: * neighbor PEER peer-group WORD: BGP Peer Group. (line 10)
1.1.1.5 ! misho 407: * neighbor PEER port PORT: BGP Peer commands. (line 67)
1.1.1.3 misho 408: * neighbor PEER prefix-list NAME [in|out]: Peer filtering. (line 11)
409: * neighbor PEER remote-as ASN: Defining Peer. (line 7)
410: * neighbor PEER route-map NAME [in|out]: Peer filtering. (line 15)
411: * neighbor PEER route-reflector-client: Route Reflector. (line 9)
1.1.1.5 ! misho 412: * neighbor PEER send-community: BGP Peer commands. (line 70)
1.1.1.3 misho 413: * neighbor PEER shutdown: BGP Peer commands. (line 10)
414: * neighbor PEER strict-capability-match: Capability Negotiation.
415: (line 40)
1.1.1.5 ! misho 416: * neighbor PEER ttl-security hops NUMBER: BGP Peer commands. (line 102)
1.1.1.3 misho 417: * neighbor PEER update-source <IFNAME|ADDRESS>: BGP Peer commands.
1.1.1.5 ! misho 418: (line 50)
1.1.1.3 misho 419: * neighbor PEER version VERSION: BGP Peer commands. (line 24)
1.1.1.5 ! misho 420: * neighbor PEER weight WEIGHT: BGP Peer commands. (line 73)
1.1.1.3 misho 421: * neighbor PEER-GROUP route-server-client: Commands for configuring a Route Server.
422: (line 10)
423: * neighbor WORD peer-group: BGP Peer Group. (line 7)
424: * neighbor X:X::X:X route-server-client: Commands for configuring a Route Server.
425: (line 12)
426: * network A.B.C.D/M: BGP route. (line 7)
427: * network A.B.C.D/M area <0-4294967295>: OSPF router. (line 175)
428: * network A.B.C.D/M area A.B.C.D: OSPF router. (line 174)
1.1.1.5 ! misho 429: * network IFNAME <1>: ripngd Configuration.
1.1.1.3 misho 430: (line 18)
431: * network IFNAME: RIP Configuration. (line 27)
432: * network NETWORK <1>: ripngd Configuration.
433: (line 15)
434: * network NETWORK: RIP Configuration. (line 15)
1.1.1.4 misho 435: * no agentx: MIB and command reference.
436: (line 36)
1.1.1.3 misho 437: * no aggregate-address A.B.C.D/M: Route Aggregation. (line 18)
438: * no area <0-4294967295> authentication: OSPF area. (line 129)
439: * no area <0-4294967295> export-list NAME: OSPF area. (line 87)
440: * no area <0-4294967295> filter-list prefix NAME in: OSPF area.
441: (line 121)
442: * no area <0-4294967295> filter-list prefix NAME out: OSPF area.
443: (line 122)
444: * no area <0-4294967295> import-list NAME: OSPF area. (line 111)
445: * no area <0-4294967295> range A.B.C.D/M: OSPF area. (line 10)
446: * no area <0-4294967295> shortcut: OSPF area. (line 57)
447: * no area <0-4294967295> stub: OSPF area. (line 64)
448: * no area <0-4294967295> stub no-summary: OSPF area. (line 76)
449: * no area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 52)
450: * no area A.B.C.D authentication: OSPF area. (line 128)
451: * no area A.B.C.D default-cost <0-16777215>: OSPF area. (line 81)
452: * no area A.B.C.D export-list NAME: OSPF area. (line 86)
453: * no area A.B.C.D filter-list prefix NAME in: OSPF area. (line 119)
454: * no area A.B.C.D filter-list prefix NAME out: OSPF area. (line 120)
455: * no area A.B.C.D import-list NAME: OSPF area. (line 110)
456: * no area A.B.C.D range A.B.C.D/M: OSPF area. (line 9)
457: * no area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 29)
458: * no area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
459: (line 36)
460: * no area A.B.C.D shortcut: OSPF area. (line 56)
461: * no area A.B.C.D stub: OSPF area. (line 63)
462: * no area A.B.C.D stub no-summary: OSPF area. (line 75)
463: * no area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 51)
1.1.1.5 ! misho 464: * no auto-cost reference-bandwidth <1>: OSPF6 router. (line 52)
1.1.1.3 misho 465: * no auto-cost reference-bandwidth: OSPF router. (line 164)
466: * no bandwidth <1-10000000>: Interface Commands. (line 32)
467: * no banner motd: Basic Config Commands.
468: (line 127)
469: * no bgp multiple-instance: Multiple instance. (line 14)
470: * no debug event: More Show IP BGP. (line 45)
471: * no debug keepalive: More Show IP BGP. (line 49)
472: * no debug ospf ism: Debugging OSPF. (line 14)
473: * no debug ospf ism (status|events|timers): Debugging OSPF. (line 15)
474: * no debug ospf lsa: Debugging OSPF. (line 24)
475: * no debug ospf lsa (generate|flooding|refresh): Debugging OSPF.
476: (line 25)
477: * no debug ospf nsm: Debugging OSPF. (line 19)
478: * no debug ospf nsm (status|events|timers): Debugging OSPF. (line 20)
479: * no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
480: (line 10)
481: * no debug ospf zebra: Debugging OSPF. (line 29)
482: * no debug ospf zebra (interface|redistribute): Debugging OSPF.
483: (line 30)
484: * no debug update: More Show IP BGP. (line 47)
485: * no default-information originate: Redistribute routes to OSPF.
486: (line 50)
487: * no default-metric: Redistribute routes to OSPF.
488: (line 66)
489: * no default-metric <1-16>: RIP Metric Manipulation.
490: (line 12)
491: * no distance <1-255> <1>: Redistribute routes to OSPF.
492: (line 69)
493: * no distance <1-255>: RIP distance. (line 10)
494: * no distance <1-255> A.B.C.D/M: RIP distance. (line 14)
495: * no distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 19)
496: * no distance ospf: Redistribute routes to OSPF.
497: (line 73)
498: * no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
499: (line 60)
1.1.1.5 ! misho 500: * no dump bgp all [PATH] [INTERVAL]: Dump BGP packets and table.
! 501: (line 9)
! 502: * no dump bgp route-mrt [PATH] [INTERVAL]: Dump BGP packets and table.
! 503: (line 27)
! 504: * no dump bgp updates [PATH] [INTERVAL]: Dump BGP packets and table.
! 505: (line 18)
1.1.1.3 misho 506: * no exec-timeout: Basic Config Commands.
507: (line 138)
508: * no ip address ADDRESS/PREFIX: Interface Commands. (line 15)
509: * no ip address ADDRESS/PREFIX secondary: Interface Commands. (line 20)
510: * no ip as-path access-list WORD: AS Path Access List. (line 12)
511: * no ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
512: (line 13)
513: * no ip community-list expanded NAME: BGP Community Lists. (line 37)
514: * no ip community-list NAME: BGP Community Lists. (line 35)
515: * no ip community-list standard NAME: BGP Community Lists. (line 36)
516: * no ip extcommunity-list expanded NAME: BGP Extended Community Lists.
517: (line 29)
518: * no ip extcommunity-list NAME: BGP Extended Community Lists.
519: (line 27)
520: * no ip extcommunity-list standard NAME: BGP Extended Community Lists.
521: (line 28)
1.1.1.5 ! misho 522: * no ip mroute PREFIX NEXTHOP [DISTANCE]: Multicast RIB Commands.
! 523: (line 73)
! 524: * no ip multicast rpf-lookup-mode [MODE]: Multicast RIB Commands.
! 525: (line 20)
! 526: * no ip ospf area [ADDR]: OSPF interface. (line 8)
! 527: * no ip ospf authentication-key: OSPF interface. (line 20)
! 528: * no ip ospf cost: OSPF interface. (line 58)
! 529: * no ip ospf dead-interval: OSPF interface. (line 65)
! 530: * no ip ospf hello-interval: OSPF interface. (line 82)
! 531: * no ip ospf message-digest-key: OSPF interface. (line 46)
! 532: * no ip ospf network: OSPF interface. (line 93)
! 533: * no ip ospf priority: OSPF interface. (line 97)
! 534: * no ip ospf retransmit interval: OSPF interface. (line 104)
! 535: * no ip ospf transmit-delay: OSPF interface. (line 110)
1.1.1.3 misho 536: * no ip prefix-list NAME: IP Prefix List. (line 67)
537: * no ip prefix-list NAME description [DESC]: ip prefix-list description.
538: (line 11)
539: * no ip prefix-list sequence-number: ip prefix-list sequential number control.
540: (line 11)
541: * no ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
542: (line 44)
543: * no ip rip authentication mode md5: RIP Authentication. (line 30)
544: * no ip rip authentication mode text: RIP Authentication. (line 34)
545: * no ip rip authentication string STRING: RIP Authentication. (line 38)
546: * no ip split-horizon: RIP Configuration. (line 71)
547: * no ipv6 address ADDRESS/PREFIX: Interface Commands. (line 16)
548: * no ipv6 nd adv-interval-option: Router Advertisement.
1.1.1.5 ! misho 549: (line 128)
1.1.1.3 misho 550: * no ipv6 nd home-agent-config-flag: Router Advertisement.
551: (line 102)
552: * no ipv6 nd home-agent-lifetime [<0-65520>]: Router Advertisement.
1.1.1.5 ! misho 553: (line 119)
1.1.1.3 misho 554: * no ipv6 nd home-agent-preference [<0-65535>]: Router Advertisement.
555: (line 110)
556: * no ipv6 nd managed-config-flag: Router Advertisement.
557: (line 85)
558: * no ipv6 nd mtu [<1-65535>]: Router Advertisement.
1.1.1.5 ! misho 559: (line 143)
1.1.1.3 misho 560: * no ipv6 nd other-config-flag: Router Advertisement.
561: (line 94)
562: * no ipv6 nd ra-interval [<1-1800>]: Router Advertisement.
563: (line 50)
564: * no ipv6 nd ra-interval [msec <70-1800000>]: Router Advertisement.
565: (line 57)
566: * no ipv6 nd ra-lifetime [<0-9000>]: Router Advertisement.
567: (line 64)
568: * no ipv6 nd reachable-time [<1-3600000>]: Router Advertisement.
569: (line 76)
570: * no ipv6 nd router-preference [(high|medium|low)]: Router Advertisement.
1.1.1.5 ! misho 571: (line 136)
1.1.1.3 misho 572: * no ipv6 nd suppress-ra: Router Advertisement.
573: (line 7)
574: * no link-detect: Interface Commands. (line 38)
575: * no log facility: Basic Config Commands.
576: (line 82)
577: * no log file: Basic Config Commands.
578: (line 43)
579: * no log monitor: Basic Config Commands.
580: (line 70)
581: * no log record-priority: Basic Config Commands.
582: (line 88)
583: * no log stdout: Basic Config Commands.
584: (line 30)
585: * no log syslog: Basic Config Commands.
586: (line 61)
587: * no log timestamp precision: Basic Config Commands.
588: (line 98)
589: * no log trap: Basic Config Commands.
590: (line 18)
591: * no log-adjacency-changes [detail]: OSPF router. (line 74)
592: * no max-metric router-lsa [on-startup|on-shutdown|administrative]: OSPF router.
593: (line 133)
594: * no multicast: Interface Commands. (line 28)
595: * no neighbor A.B.C.D: RIP Configuration. (line 35)
1.1.1.5 ! misho 596: * no neighbor PEER default-originate: BGP Peer commands. (line 62)
1.1.1.3 misho 597: * no neighbor PEER description ...: BGP Peer commands. (line 21)
598: * no neighbor PEER dont-capability-negotiate: Capability Negotiation.
599: (line 52)
600: * no neighbor PEER ebgp-multihop: BGP Peer commands. (line 18)
601: * no neighbor PEER interface IFNAME: BGP Peer commands. (line 34)
1.1.1.5 ! misho 602: * no neighbor PEER local-as: BGP Peer commands. (line 84)
! 603: * no neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 79)
! 604: * no neighbor PEER next-hop-self [all]: BGP Peer commands. (line 44)
1.1.1.3 misho 605: * no neighbor PEER override-capability: Capability Negotiation.
606: (line 68)
607: * no neighbor PEER route-reflector-client: Route Reflector. (line 10)
608: * no neighbor PEER shutdown: BGP Peer commands. (line 11)
609: * no neighbor PEER strict-capability-match: Capability Negotiation.
610: (line 41)
1.1.1.5 ! misho 611: * no neighbor PEER ttl-security hops NUMBER: BGP Peer commands.
! 612: (line 103)
! 613: * no neighbor PEER update-source: BGP Peer commands. (line 51)
! 614: * no neighbor PEER weight WEIGHT: BGP Peer commands. (line 74)
1.1.1.3 misho 615: * no network A.B.C.D/M: BGP route. (line 16)
616: * no network A.B.C.D/M area <0-4294967295>: OSPF router. (line 177)
617: * no network A.B.C.D/M area A.B.C.D: OSPF router. (line 176)
618: * no network IFNAME: RIP Configuration. (line 28)
619: * no network NETWORK: RIP Configuration. (line 16)
620: * no ospf abr-type TYPE: OSPF router. (line 27)
621: * no ospf rfc1583compatibility: OSPF router. (line 63)
622: * no ospf router-id: OSPF router. (line 17)
623: * no passive-interface IFNAME: RIP Configuration. (line 58)
624: * no passive-interface INTERFACE: OSPF router. (line 80)
625: * no redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
626: (line 22)
627: * no redistribute bgp: How to Announce RIP route.
628: (line 44)
629: * no redistribute connected: How to Announce RIP route.
630: (line 26)
631: * no redistribute kernel: How to Announce RIP route.
632: (line 10)
633: * no redistribute ospf: How to Announce RIP route.
634: (line 36)
635: * no redistribute static: How to Announce RIP route.
636: (line 18)
637: * no route A.B.C.D/M: How to Announce RIP route.
638: (line 54)
639: * no router bgp ASN: BGP router. (line 19)
640: * no router ospf: OSPF router. (line 11)
641: * no router rip: RIP Configuration. (line 12)
642: * no shutdown: Interface Commands. (line 10)
643: * no smux peer OID: MIB and command reference.
1.1.1.4 misho 644: (line 28)
1.1.1.3 misho 645: * no smux peer OID PASSWORD: MIB and command reference.
1.1.1.4 misho 646: (line 31)
1.1.1.3 misho 647: * no timers basic: RIP Timers. (line 31)
1.1.1.5 ! misho 648: * no timers throttle spf <1>: OSPF6 router. (line 18)
1.1.1.3 misho 649: * no timers throttle spf: OSPF router. (line 92)
650: * no version: RIP Version Control. (line 30)
651: * offset-list ACCESS-LIST (in|out): RIP Metric Manipulation.
652: (line 20)
653: * offset-list ACCESS-LIST (in|out) IFNAME: RIP Metric Manipulation.
654: (line 21)
655: * on-match goto N: Route Map Exit Action Command.
656: (line 11)
657: * on-match next: Route Map Exit Action Command.
658: (line 7)
659: * ospf abr-type TYPE: OSPF router. (line 26)
660: * ospf rfc1583compatibility: OSPF router. (line 62)
661: * ospf router-id A.B.C.D: OSPF router. (line 16)
662: * passive-interface (IFNAME|default): RIP Configuration. (line 57)
663: * passive-interface INTERFACE: OSPF router. (line 79)
664: * password PASSWORD: Basic Config Commands.
665: (line 10)
666: * redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
667: (line 7)
668: * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214>: Redistribute routes to OSPF.
669: (line 15)
670: * redistribute (kernel|connected|static|rip|bgp) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
671: (line 17)
672: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2): Redistribute routes to OSPF.
673: (line 11)
674: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214>: Redistribute routes to OSPF.
675: (line 19)
676: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
677: (line 21)
678: * redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
679: (line 13)
680: * redistribute (kernel|connected|static|rip|bgp) ROUTE-MAP: Redistribute routes to OSPF.
681: (line 9)
682: * redistribute bgp: How to Announce RIP route.
683: (line 41)
684: * redistribute bgp metric <0-16>: How to Announce RIP route.
685: (line 42)
686: * redistribute bgp route-map ROUTE-MAP: How to Announce RIP route.
687: (line 43)
688: * redistribute connected <1>: Redistribute to BGP. (line 13)
689: * redistribute connected <2>: Redistribute routes to OSPF6.
690: (line 8)
691: * redistribute connected: How to Announce RIP route.
692: (line 23)
693: * redistribute connected metric <0-16>: How to Announce RIP route.
694: (line 24)
695: * redistribute connected route-map ROUTE-MAP: How to Announce RIP route.
696: (line 25)
697: * redistribute kernel <1>: Redistribute to BGP. (line 7)
698: * redistribute kernel: How to Announce RIP route.
699: (line 7)
700: * redistribute kernel metric <0-16>: How to Announce RIP route.
701: (line 8)
702: * redistribute kernel route-map ROUTE-MAP: How to Announce RIP route.
703: (line 9)
704: * redistribute ospf <1>: Redistribute to BGP. (line 19)
705: * redistribute ospf: How to Announce RIP route.
706: (line 33)
707: * redistribute ospf metric <0-16>: How to Announce RIP route.
708: (line 34)
709: * redistribute ospf route-map ROUTE-MAP: How to Announce RIP route.
710: (line 35)
711: * redistribute rip: Redistribute to BGP. (line 16)
712: * redistribute ripng: Redistribute routes to OSPF6.
713: (line 9)
714: * redistribute static <1>: Redistribute to BGP. (line 10)
715: * redistribute static <2>: Redistribute routes to OSPF6.
716: (line 7)
717: * redistribute static: How to Announce RIP route.
718: (line 15)
719: * redistribute static metric <0-16>: How to Announce RIP route.
720: (line 16)
721: * redistribute static route-map ROUTE-MAP: How to Announce RIP route.
722: (line 17)
723: * route A.B.C.D/M: How to Announce RIP route.
724: (line 53)
725: * route NETWORK: ripngd Configuration.
726: (line 21)
727: * route-map ROUTE-MAP-NAME (permit|deny) ORDER: Route Map Command.
728: (line 7)
729: * router bgp AS-NUMBER: BGP instance and view.
730: (line 11)
731: * router bgp AS-NUMBER view NAME: BGP instance and view.
732: (line 28)
733: * router bgp ASN: BGP router. (line 13)
734: * router ospf: OSPF router. (line 10)
735: * router ospf6: OSPF6 router. (line 7)
736: * router rip: RIP Configuration. (line 7)
737: * router ripng: ripngd Configuration.
738: (line 9)
739: * router zebra: ripngd Configuration.
740: (line 24)
741: * router-id A.B.C.D: OSPF6 router. (line 9)
742: * service advanced-vty: Basic Config Commands.
743: (line 114)
744: * service integrated-vtysh-config: VTY shell integrated configuration.
745: (line 7)
746: * service password-encryption: Basic Config Commands.
747: (line 111)
748: * service terminal-length <0-512>: Basic Config Commands.
749: (line 117)
750: * set as-path prepend AS-PATH: Using AS Path in Route Map.
751: (line 9)
752: * set as-path prepend AS_PATH: Route Map Set Command.
753: (line 19)
1.1.1.5 ! misho 754: * set as-path prepend last-as NUM: Using AS Path in Route Map.
! 755: (line 12)
1.1.1.3 misho 756: * set comm-list WORD delete: BGP Community in Route Map.
757: (line 34)
758: * set community COMMUNITY <1>: Route Map Set Command.
759: (line 22)
760: * set community COMMUNITY: BGP Community in Route Map.
761: (line 23)
762: * set community COMMUNITY additive: BGP Community in Route Map.
763: (line 24)
764: * set community none: BGP Community in Route Map.
765: (line 22)
766: * set extcommunity rt EXTCOMMUNITY: BGP Extended Communities in Route Map.
767: (line 9)
768: * set extcommunity soo EXTCOMMUNITY: BGP Extended Communities in Route Map.
769: (line 12)
770: * set ip next-hop A.B.C.D: RIP route-map. (line 53)
771: * set ip next-hop IPV4_ADDRESS: Route Map Set Command.
772: (line 7)
773: * set ipv6 next-hop global IPV6_ADDRESS: Route Map Set Command.
774: (line 25)
775: * set ipv6 next-hop local IPV6_ADDRESS: Route Map Set Command.
776: (line 28)
777: * set local-preference LOCAL_PREF: Route Map Set Command.
778: (line 10)
779: * set metric <0-4294967295>: RIP route-map. (line 58)
780: * set metric METRIC: Route Map Set Command.
781: (line 16)
782: * set src ADDRESS: zebra Route Filtering.
783: (line 17)
784: * set weight WEIGHT: Route Map Set Command.
785: (line 13)
1.1.1.5 ! misho 786: * show bgp ipv4 encap summary: BGP Address Family. (line 24)
! 787: * show bgp ipv4 vpn summary: BGP Address Family. (line 25)
! 788: * show bgp ipv6 encap summary: BGP Address Family. (line 26)
! 789: * show bgp ipv6 vpn summary: BGP Address Family. (line 27)
1.1.1.3 misho 790: * show debug: More Show IP BGP. (line 37)
791: * show debugging ospf: Debugging OSPF. (line 32)
792: * show debugging rip: RIP Debug Commands. (line 29)
793: * show debugging ripng: ripngd Terminal Mode Commands.
794: (line 9)
795: * show interface: zebra Terminal Mode Commands.
796: (line 21)
797: * show ip bgp: Show IP BGP. (line 7)
798: * show ip bgp A.B.C.D: Show IP BGP. (line 8)
799: * show ip bgp community: Display BGP Routes by Community.
800: (line 11)
801: * show ip bgp community COMMUNITY <1>: More Show IP BGP. (line 11)
802: * show ip bgp community COMMUNITY: Display BGP Routes by Community.
803: (line 12)
804: * show ip bgp community COMMUNITY exact-match <1>: More Show IP BGP.
805: (line 12)
806: * show ip bgp community COMMUNITY exact-match: Display BGP Routes by Community.
807: (line 13)
808: * show ip bgp community-list WORD <1>: More Show IP BGP. (line 16)
809: * show ip bgp community-list WORD: Display BGP Routes by Community.
810: (line 20)
811: * show ip bgp community-list WORD exact-match <1>: More Show IP BGP.
812: (line 17)
813: * show ip bgp community-list WORD exact-match: Display BGP Routes by Community.
814: (line 21)
815: * show ip bgp dampened-paths: More Show IP BGP. (line 31)
1.1.1.5 ! misho 816: * show ip bgp encap all: BGP Address Family. (line 19)
1.1.1.3 misho 817: * show ip bgp flap-statistics: More Show IP BGP. (line 34)
818: * show ip bgp neighbor [PEER]: More Show IP BGP. (line 23)
819: * show ip bgp regexp LINE <1>: More Show IP BGP. (line 7)
820: * show ip bgp regexp LINE: Display BGP Routes by AS Path.
821: (line 10)
822: * show ip bgp summary: More Show IP BGP. (line 21)
823: * show ip bgp view NAME: Viewing the view. (line 9)
1.1.1.5 ! misho 824: * show ip bgp vpnv4 all: BGP Address Family. (line 15)
1.1.1.3 misho 825: * show ip bgp X:X::X:X: Show IP BGP. (line 9)
826: * show ip community-list: BGP Community Lists. (line 42)
827: * show ip community-list NAME: BGP Community Lists. (line 43)
828: * show ip extcommunity-list: BGP Extended Community Lists.
829: (line 35)
830: * show ip extcommunity-list NAME: BGP Extended Community Lists.
831: (line 36)
832: * show ip ospf: Showing OSPF information.
833: (line 7)
834: * show ip ospf database: Showing OSPF information.
835: (line 20)
836: * show ip ospf database (asbr-summary|external|network|router|summary): Showing OSPF information.
837: (line 23)
838: * show ip ospf database (asbr-summary|external|network|router|summary) adv-router ADV-ROUTER: Showing OSPF information.
839: (line 30)
840: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID: Showing OSPF information.
841: (line 25)
842: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID adv-router ADV-ROUTER: Showing OSPF information.
843: (line 28)
844: * show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID self-originate: Showing OSPF information.
845: (line 33)
846: * show ip ospf database (asbr-summary|external|network|router|summary) self-originate: Showing OSPF information.
847: (line 35)
848: * show ip ospf database max-age: Showing OSPF information.
849: (line 37)
850: * show ip ospf database self-originate: Showing OSPF information.
851: (line 39)
852: * show ip ospf interface [INTERFACE]: Showing OSPF information.
853: (line 11)
854: * show ip ospf neighbor: Showing OSPF information.
855: (line 15)
856: * show ip ospf neighbor detail: Showing OSPF information.
857: (line 17)
858: * show ip ospf neighbor INTERFACE: Showing OSPF information.
859: (line 16)
860: * show ip ospf neighbor INTERFACE detail: Showing OSPF information.
861: (line 18)
862: * show ip ospf route: Showing OSPF information.
863: (line 41)
864: * show ip prefix-list: Showing ip prefix-list.
865: (line 7)
866: * show ip prefix-list [NAME]: zebra Terminal Mode Commands.
867: (line 23)
868: * show ip prefix-list detail: Showing ip prefix-list.
869: (line 31)
870: * show ip prefix-list detail NAME: Showing ip prefix-list.
871: (line 33)
872: * show ip prefix-list NAME: Showing ip prefix-list.
873: (line 10)
874: * show ip prefix-list NAME A.B.C.D/M: Showing ip prefix-list.
875: (line 17)
876: * show ip prefix-list NAME A.B.C.D/M first-match: Showing ip prefix-list.
877: (line 25)
878: * show ip prefix-list NAME A.B.C.D/M longer: Showing ip prefix-list.
879: (line 23)
880: * show ip prefix-list NAME seq NUM: Showing ip prefix-list.
881: (line 13)
882: * show ip prefix-list summary: Showing ip prefix-list.
883: (line 27)
884: * show ip prefix-list summary NAME: Showing ip prefix-list.
885: (line 29)
886: * show ip protocol: zebra Terminal Mode Commands.
887: (line 27)
888: * show ip rip: Show RIP Information.
889: (line 9)
1.1.1.5 ! misho 890: * show ip rip status: Show RIP Information.
! 891: (line 17)
1.1.1.3 misho 892: * show ip ripng: ripngd Terminal Mode Commands.
893: (line 7)
894: * show ip route: zebra Terminal Mode Commands.
895: (line 7)
1.1.1.5 ! misho 896: * show ip rpf: Multicast RIB Commands.
! 897: (line 67)
! 898: * show ip rpf ADDR: Multicast RIB Commands.
! 899: (line 54)
1.1.1.3 misho 900: * show ipforward: zebra Terminal Mode Commands.
901: (line 29)
1.1.1.5 ! misho 902: * show ipv6 bgp encap all: BGP Address Family. (line 20)
! 903: * show ipv6 bgp vpn all: BGP Address Family. (line 16)
1.1.1.3 misho 904: * show ipv6 ospf6 [INSTANCE_ID]: Showing OSPF6 information.
905: (line 7)
906: * show ipv6 ospf6 database: Showing OSPF6 information.
907: (line 11)
908: * show ipv6 ospf6 interface: Showing OSPF6 information.
909: (line 15)
910: * show ipv6 ospf6 neighbor: Showing OSPF6 information.
911: (line 18)
912: * show ipv6 ospf6 request-list A.B.C.D: Showing OSPF6 information.
913: (line 21)
914: * show ipv6 route: zebra Terminal Mode Commands.
915: (line 19)
916: * show ipv6 route ospf6: Showing OSPF6 information.
917: (line 24)
918: * show ipv6forward: zebra Terminal Mode Commands.
919: (line 34)
920: * show logging: Terminal Mode Commands.
921: (line 30)
922: * show route-map [NAME]: zebra Terminal Mode Commands.
923: (line 25)
924: * show version: Terminal Mode Commands.
925: (line 27)
1.1.1.4 misho 926: * show zebra fpm stats: zebra Terminal Mode Commands.
927: (line 37)
1.1.1.3 misho 928: * shutdown: Interface Commands. (line 9)
929: * smux peer OID: MIB and command reference.
1.1.1.4 misho 930: (line 27)
1.1.1.3 misho 931: * smux peer OID PASSWORD: MIB and command reference.
1.1.1.4 misho 932: (line 30)
1.1.1.3 misho 933: * table TABLENO: Static Route Commands.
934: (line 81)
935: * terminal length <0-512>: Terminal Mode Commands.
936: (line 17)
937: * timers basic UPDATE TIMEOUT GARBAGE: RIP Timers. (line 7)
1.1.1.5 ! misho 938: * timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME <1>: OSPF6 router.
! 939: (line 17)
1.1.1.3 misho 940: * timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME: OSPF router.
941: (line 91)
942: * username USERNAME nopassword: VTY shell username. (line 7)
943: * version VERSION: RIP Version Control. (line 20)
944: * who: Terminal Mode Commands.
945: (line 21)
946: * write file: Terminal Mode Commands.
947: (line 10)
948: * write terminal: Terminal Mode Commands.
949: (line 7)
950:
951:
952: File: quagga.info, Node: VTY Key Index, Next: Index, Prev: Command Index, Up: Top
953:
954: VTY Key Index
955: *************
956:
957: [index ]
958: * Menu:
959:
1.1.1.5 ! misho 960: * <?>: CLI Advanced Commands.
! 961: (line 27)
1.1.1.3 misho 962: * <DEL>: CLI Editing Commands. (line 11)
963: * <DOWN>: CLI Advanced Commands.
964: (line 17)
965: * <LEFT>: CLI Movement Commands.
966: (line 15)
967: * <RIGHT>: CLI Movement Commands.
968: (line 11)
969: * <TAB>: CLI Advanced Commands.
970: (line 24)
971: * <UP>: CLI Advanced Commands.
972: (line 21)
973: * C-a: CLI Movement Commands.
974: (line 24)
975: * C-b: CLI Movement Commands.
976: (line 15)
977: * C-c: CLI Advanced Commands.
978: (line 10)
979: * C-d: CLI Editing Commands. (line 14)
980: * C-e: CLI Movement Commands.
981: (line 27)
982: * C-f: CLI Movement Commands.
983: (line 11)
984: * C-h: CLI Editing Commands. (line 11)
985: * C-k: CLI Editing Commands. (line 23)
986: * C-n: CLI Advanced Commands.
987: (line 17)
988: * C-p: CLI Advanced Commands.
989: (line 21)
990: * C-t: CLI Editing Commands. (line 29)
991: * C-u: CLI Editing Commands. (line 26)
992: * C-w: CLI Editing Commands. (line 20)
993: * C-z: CLI Advanced Commands.
994: (line 13)
995: * M-b: CLI Movement Commands.
996: (line 21)
997: * M-d: CLI Editing Commands. (line 17)
998: * M-f: CLI Movement Commands.
999: (line 18)
1000:
1001:
1.1 misho 1002: File: quagga.info, Node: Index, Prev: VTY Key Index, Up: Top
1003:
1004: Index
1005: *****
1006:
1007: [index ]
1008: * Menu:
1009:
1.1.1.5 ! misho 1010: * About Quagga: About Quagga. (line 6)
! 1011: * Bug hunting: Bug Reports. (line 6)
! 1012: * Bug Reports: Bug Reports. (line 6)
1.1 misho 1013: * Build options: The Configure script and its options.
1.1.1.5 ! misho 1014: (line 6)
! 1015: * Building on Linux boxes: Linux notes. (line 6)
! 1016: * Building the system: Installation. (line 6)
! 1017: * Compatibility with other systems: Supported Platforms. (line 6)
1.1 misho 1018: * Configuration files for running the software: Config Commands.
1.1.1.5 ! misho 1019: (line 6)
1.1 misho 1020: * Configuration options: The Configure script and its options.
1.1.1.5 ! misho 1021: (line 6)
! 1022: * Configuring Quagga: Linux notes. (line 6)
! 1023: * Contact information: Mailing List. (line 6)
! 1024: * Distance-vector routing protocol: OSPF Fundamentals. (line 6)
1.1 misho 1025: * Distribution configuration: The Configure script and its options.
1.1.1.5 ! misho 1026: (line 6)
! 1027: * Errors in the software: Bug Reports. (line 6)
! 1028: * Files for running configurations: Config Commands. (line 6)
! 1029: * Found a bug?: Bug Reports. (line 6)
! 1030: * Getting the herd running: Config Commands. (line 6)
! 1031: * How to get in touch with Quagga: Mailing List. (line 6)
! 1032: * How to install Quagga: Installation. (line 6)
! 1033: * Installation: Installation. (line 6)
! 1034: * Installing Quagga: Installation. (line 6)
! 1035: * Link State Advertisement: OSPF Fundamentals. (line 12)
! 1036: * Link State Announcement: OSPF Fundamentals. (line 12)
! 1037: * Link State DataBase: OSPF Fundamentals. (line 12)
! 1038: * Link-state routing protocol: OSPF Fundamentals. (line 6)
! 1039: * Link-state routing protocol advantages: OSPF Fundamentals. (line 22)
! 1040: * Link-state routing protocol disadvantages: OSPF Fundamentals.
! 1041: (line 32)
! 1042: * Linux configurations: Linux notes. (line 6)
! 1043: * LSA flooding: OSPF Fundamentals. (line 12)
! 1044: * Mailing lists: Mailing List. (line 6)
! 1045: * Mailing Quagga: Mailing List. (line 6)
! 1046: * Making Quagga: Installation. (line 6)
! 1047: * Modifying the herd's behavior: Config Commands. (line 6)
! 1048: * Operating systems that support Quagga: Supported Platforms. (line 6)
1.1 misho 1049: * Options for configuring: The Configure script and its options.
1.1.1.5 ! misho 1050: (line 6)
1.1 misho 1051: * Options to ./configure: The Configure script and its options.
1.1.1.5 ! misho 1052: (line 6)
! 1053: * OSPF Areas overview: OSPF Fundamentals. (line 106)
! 1054: * OSPF Fundamentals: OSPFv2. (line 25)
! 1055: * OSPF Hello Protocol: OSPF Fundamentals. (line 54)
! 1056: * OSPF Hello Protocol overview: OSPF Fundamentals. (line 53)
! 1057: * OSPF LSA overview: OSPF Fundamentals. (line 75)
1.1 misho 1058: * OSPFv2: ripngd Filtering Commands.
1.1.1.5 ! misho 1059: (line 14)
! 1060: * Overview: Overview. (line 6)
1.1 misho 1061: * Quagga Least-Privileges: Least-Privilege support.
1.1.1.5 ! misho 1062: (line 6)
! 1063: * Quagga on other systems: Supported Platforms. (line 6)
1.1 misho 1064: * Quagga Privileges: Least-Privilege support.
1.1.1.5 ! misho 1065: (line 6)
! 1066: * Reporting bugs: Bug Reports. (line 6)
! 1067: * Reporting software errors: Bug Reports. (line 6)
! 1068: * Software architecture: System Architecture. (line 6)
! 1069: * Software internals: System Architecture. (line 6)
! 1070: * Supported platforms: Supported Platforms. (line 6)
! 1071: * System architecture: System Architecture. (line 6)
1.1 misho 1072:
1073:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to quagga.info-2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc