Return to ripngd.texi CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / doc

quagga

    1: @c -*-texinfo-*-
    2: @c This is part of the Quagga Manual.
    3: @c @value{COPYRIGHT_STR}
    4: @c See file quagga.texi for copying conditions.
    5: @node RIPng
    6: @chapter RIPng
    7: 
    8: @command{ripngd} supports the RIPng protocol as described in RFC2080.  It's an
    9: IPv6 reincarnation of the RIP protocol.
   10: 
   11: @menu
   12: * Invoking ripngd::             
   13: * ripngd Configuration::        
   14: * ripngd Terminal Mode Commands::  
   15: * ripngd Filtering Commands::   
   16: @end menu
   17: 
   18: @node Invoking ripngd
   19: @section Invoking ripngd
   20: 
   21: There are no @code{ripngd} specific invocation options.  Common options
   22: can be specified (@pxref{Common Invocation Options}).
   23: 
   24: @node ripngd Configuration
   25: @section ripngd Configuration
   26: 
   27: Currently ripngd supports the following commands:
   28: 
   29: @deffn Command {router ripng} {}
   30: Enable RIPng.
   31: @end deffn
   32: 
   33: @deffn {RIPng Command} {flush_timer @var{time}} {}
   34: Set flush timer.
   35: @end deffn
   36: 
   37: @deffn {RIPng Command} {network @var{network}} {}
   38: Set RIPng enabled interface by @var{network}
   39: @end deffn
   40: 
   41: @deffn {RIPng Command} {network @var{ifname}} {}
   42: Set RIPng enabled interface by @var{ifname}
   43: @end deffn
   44: 
   45: @deffn {RIPng Command} {route @var{network}} {}
   46: Set RIPng static routing announcement of @var{network}.
   47: @end deffn
   48: 
   49: @deffn Command {router zebra} {}
   50: This command is the default and does not appear in the configuration.
   51: With this statement, RIPng routes go to the @command{zebra} daemon.
   52: @end deffn
   53: 
   54: @node ripngd Terminal Mode Commands
   55: @section ripngd Terminal Mode Commands
   56: 
   57: @deffn Command {show ip ripng} {}
   58: @end deffn
   59: 
   60: @deffn Command {show debugging ripng} {}
   61: @end deffn
   62: 
   63: @deffn Command {debug ripng events} {}
   64: @end deffn
   65: 
   66: @deffn Command {debug ripng packet} {}
   67: @end deffn
   68: 
   69: @deffn Command {debug ripng zebra} {}
   70: @end deffn
   71: 
   72: @node ripngd Filtering Commands
   73: @section ripngd Filtering Commands
   74: 
   75: @deffn Command {distribute-list @var{access_list} (in|out) @var{ifname}} {}
   76: You can apply an access-list to the interface using the
   77: @code{distribute-list} command.  @var{access_list} is an access-list
   78: name.  @var{direct} is @samp{in} or @samp{out}.  If @var{direct} is
   79: @samp{in}, the access-list is applied only to incoming packets.
   80: 
   81: @example
   82: distribute-list local-only out sit1
   83: @end example
   84: @end deffn