embedaddon/quagga/ospf6d/README - diff

Return to README CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / ospf6d

version 1.1, 2012/02/21 17:26:12	version 1.1.1.2, 2016/11/02 10:09:11
Line 60 CONFIG NODE:	Line 60 CONFIG NODE:

INTERFACE NODE:	INTERFACE NODE:
ipv6 ospf6 cost COST	ipv6 ospf6 cost COST
Sets the interface's output cost. default 1	Sets the interface's output cost. Depends on interface bandwidth by default.

ipv6 ospf6 hello-interval HELLOINTERVAL	ipv6 ospf6 hello-interval HELLOINTERVAL
Sets the interface's Hello Interval. default 10	Sets the interface's Hello Interval. default 10
Line 84 OSPF6 NODE:	Line 84 OSPF6 NODE:
interface NAME area AREA	interface NAME area AREA
Binds interface to specified Area, and start	Binds interface to specified Area, and start
sending OSPFv3 packets.	sending OSPFv3 packets.

	auto-cost reference-bandwidth COST
	Sets the reference bandwidth for cost calculations, where this
	bandwidth is considered equivalent to an OSPF cost of 1, specified
	in Mbits/s. The default is 100Mbit/s (i.e. a link of bandwidth
	100Mbit/s or higher will have a cost of 1. Cost of lower bandwidth
	links will be scaled with reference to this cost). This
	configuration setting MUST be consistent across all routers within
	the OSPF domain.

Sample configuration is in ospf6d.conf.sample.	Sample configuration is in ospf6d.conf.sample.