Annotation of embedaddon/quagga/pkgsrc/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
! 6: # Inc.
! 7: # This Makefile.in is free software; the Free Software Foundation
! 8: # gives unlimited permission to copy and/or distribute it,
! 9: # with or without modifications, as long as this notice is preserved.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 14: # PARTICULAR PURPOSE.
! 15:
! 16: @SET_MAKE@
! 17:
! 18: VPATH = @srcdir@
! 19: pkgdatadir = $(datadir)/@PACKAGE@
! 20: pkgincludedir = $(includedir)/@PACKAGE@
! 21: pkglibdir = $(libdir)/@PACKAGE@
! 22: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 23: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 24: install_sh_DATA = $(install_sh) -c -m 644
! 25: install_sh_PROGRAM = $(install_sh) -c
! 26: install_sh_SCRIPT = $(install_sh) -c
! 27: INSTALL_HEADER = $(INSTALL_DATA)
! 28: transform = $(program_transform_name)
! 29: NORMAL_INSTALL = :
! 30: PRE_INSTALL = :
! 31: POST_INSTALL = :
! 32: NORMAL_UNINSTALL = :
! 33: PRE_UNINSTALL = :
! 34: POST_UNINSTALL = :
! 35: build_triplet = @build@
! 36: host_triplet = @host@
! 37: target_triplet = @target@
! 38: subdir = pkgsrc
! 39: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
! 40: $(srcdir)/bgpd.sh.in $(srcdir)/ospf6d.sh.in \
! 41: $(srcdir)/ospfd.sh.in $(srcdir)/ripd.sh.in \
! 42: $(srcdir)/ripngd.sh.in $(srcdir)/zebra.sh.in
! 43: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 44: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
! 45: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 46: $(ACLOCAL_M4)
! 47: mkinstalldirs = $(install_sh) -d
! 48: CONFIG_HEADER = $(top_builddir)/config.h
! 49: CONFIG_CLEAN_FILES = bgpd.sh ospf6d.sh ospfd.sh ripd.sh ripngd.sh \
! 50: zebra.sh
! 51: CONFIG_CLEAN_VPATH_FILES =
! 52: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 53: am__vpath_adj = case $$p in \
! 54: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 55: *) f=$$p;; \
! 56: esac;
! 57: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 58: am__install_max = 40
! 59: am__nobase_strip_setup = \
! 60: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 61: am__nobase_strip = \
! 62: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 63: am__nobase_list = $(am__nobase_strip_setup); \
! 64: for p in $$list; do echo "$$p $$p"; done | \
! 65: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 66: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 67: if (++n[$$2] == $(am__install_max)) \
! 68: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 69: END { for (dir in files) print dir, files[dir] }'
! 70: am__base_list = \
! 71: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 72: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 73: am__installdirs = "$(DESTDIR)$(rcdir)"
! 74: SCRIPTS = $(rc_SCRIPTS)
! 75: SOURCES =
! 76: DIST_SOURCES =
! 77: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 78: ACLOCAL = @ACLOCAL@
! 79: AMTAR = @AMTAR@
! 80: AR = @AR@
! 81: AUTOCONF = @AUTOCONF@
! 82: AUTOHEADER = @AUTOHEADER@
! 83: AUTOMAKE = @AUTOMAKE@
! 84: AWK = @AWK@
! 85: BGPD = @BGPD@
! 86: CC = @CC@
! 87: CCDEPMODE = @CCDEPMODE@
! 88: CFLAGS = @CFLAGS@
! 89: CONFDATE = @CONFDATE@
! 90: CPP = @CPP@
! 91: CPPFLAGS = @CPPFLAGS@
! 92: CURSES = @CURSES@
! 93: CYGPATH_W = @CYGPATH_W@
! 94: DEFS = @DEFS@
! 95: DEPDIR = @DEPDIR@
! 96: DLLTOOL = @DLLTOOL@
! 97: DOC = @DOC@
! 98: DSYMUTIL = @DSYMUTIL@
! 99: DUMPBIN = @DUMPBIN@
! 100: ECHO_C = @ECHO_C@
! 101: ECHO_N = @ECHO_N@
! 102: ECHO_T = @ECHO_T@
! 103: EGREP = @EGREP@
! 104: EXEEXT = @EXEEXT@
! 105: FGREP = @FGREP@
! 106: GAWK = @GAWK@
! 107: GREP = @GREP@
! 108: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
! 109: IF_METHOD = @IF_METHOD@
! 110: IF_PROC = @IF_PROC@
! 111: INCLUDES = @INCLUDES@
! 112: INSTALL = @INSTALL@
! 113: INSTALL_DATA = @INSTALL_DATA@
! 114: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 115: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 116: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 117: IOCTL_METHOD = @IOCTL_METHOD@
! 118: IPFORWARD = @IPFORWARD@
! 119: ISISD = @ISISD@
! 120: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
! 121: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
! 122: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
! 123: KERNEL_METHOD = @KERNEL_METHOD@
! 124: LD = @LD@
! 125: LDFLAGS = @LDFLAGS@
! 126: LIBCAP = @LIBCAP@
! 127: LIBM = @LIBM@
! 128: LIBOBJS = @LIBOBJS@
! 129: LIBPAM = @LIBPAM@
! 130: LIBREADLINE = @LIBREADLINE@
! 131: LIBS = @LIBS@
! 132: LIBTOOL = @LIBTOOL@
! 133: LIB_IPV6 = @LIB_IPV6@
! 134: LIB_REGEX = @LIB_REGEX@
! 135: LIPO = @LIPO@
! 136: LN_S = @LN_S@
! 137: LTLIBOBJS = @LTLIBOBJS@
! 138: MAKEINFO = @MAKEINFO@
! 139: MANIFEST_TOOL = @MANIFEST_TOOL@
! 140: MKDIR_P = @MKDIR_P@
! 141: MULTIPATH_NUM = @MULTIPATH_NUM@
! 142: NM = @NM@
! 143: NMEDIT = @NMEDIT@
! 144: OBJDUMP = @OBJDUMP@
! 145: OBJEXT = @OBJEXT@
! 146: OSPF6D = @OSPF6D@
! 147: OSPFAPI = @OSPFAPI@
! 148: OSPFCLIENT = @OSPFCLIENT@
! 149: OSPFD = @OSPFD@
! 150: OTHER_METHOD = @OTHER_METHOD@
! 151: OTOOL = @OTOOL@
! 152: OTOOL64 = @OTOOL64@
! 153: PACKAGE = @PACKAGE@
! 154: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 155: PACKAGE_NAME = @PACKAGE_NAME@
! 156: PACKAGE_STRING = @PACKAGE_STRING@
! 157: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 158: PACKAGE_URL = @PACKAGE_URL@
! 159: PACKAGE_VERSION = @PACKAGE_VERSION@
! 160: PATH_SEPARATOR = @PATH_SEPARATOR@
! 161: PERL = @PERL@
! 162: PICFLAGS = @PICFLAGS@
! 163: PILDFLAGS = @PILDFLAGS@
! 164: RANLIB = @RANLIB@
! 165: RIPD = @RIPD@
! 166: RIPNGD = @RIPNGD@
! 167: RTREAD_METHOD = @RTREAD_METHOD@
! 168: RT_METHOD = @RT_METHOD@
! 169: SED = @SED@
! 170: SET_MAKE = @SET_MAKE@
! 171: SHELL = @SHELL@
! 172: SNMP_INCLUDES = @SNMP_INCLUDES@
! 173: SOLARIS = @SOLARIS@
! 174: STRIP = @STRIP@
! 175: VERSION = @VERSION@
! 176: VTYSH = @VTYSH@
! 177: WATCHQUAGGA = @WATCHQUAGGA@
! 178: ZEBRA = @ZEBRA@
! 179: abs_builddir = @abs_builddir@
! 180: abs_srcdir = @abs_srcdir@
! 181: abs_top_builddir = @abs_top_builddir@
! 182: abs_top_srcdir = @abs_top_srcdir@
! 183: ac_ct_AR = @ac_ct_AR@
! 184: ac_ct_CC = @ac_ct_CC@
! 185: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 186: am__include = @am__include@
! 187: am__leading_dot = @am__leading_dot@
! 188: am__quote = @am__quote@
! 189: am__tar = @am__tar@
! 190: am__untar = @am__untar@
! 191: bindir = @bindir@
! 192: build = @build@
! 193: build_alias = @build_alias@
! 194: build_cpu = @build_cpu@
! 195: build_os = @build_os@
! 196: build_vendor = @build_vendor@
! 197: builddir = @builddir@
! 198: datadir = @datadir@
! 199: datarootdir = @datarootdir@
! 200: docdir = @docdir@
! 201: dvidir = @dvidir@
! 202: enable_group = @enable_group@
! 203: enable_user = @enable_user@
! 204: enable_vty_group = @enable_vty_group@
! 205: exampledir = @exampledir@
! 206: exec_prefix = @exec_prefix@
! 207: host = @host@
! 208: host_alias = @host_alias@
! 209: host_cpu = @host_cpu@
! 210: host_os = @host_os@
! 211: host_vendor = @host_vendor@
! 212: htmldir = @htmldir@
! 213: includedir = @includedir@
! 214: infodir = @infodir@
! 215: install_sh = @install_sh@
! 216: libdir = @libdir@
! 217: libexecdir = @libexecdir@
! 218: localedir = @localedir@
! 219: localstatedir = @localstatedir@
! 220: mandir = @mandir@
! 221: mkdir_p = @mkdir_p@
! 222: oldincludedir = @oldincludedir@
! 223: pdfdir = @pdfdir@
! 224: pkgsrcdir = @pkgsrcdir@
! 225: pkgsrcrcdir = @pkgsrcrcdir@
! 226: prefix = @prefix@
! 227: program_transform_name = @program_transform_name@
! 228: psdir = @psdir@
! 229: quagga_statedir = @quagga_statedir@
! 230: sbindir = @sbindir@
! 231: sharedstatedir = @sharedstatedir@
! 232: srcdir = @srcdir@
! 233: sysconfdir = @sysconfdir@
! 234: target = @target@
! 235: target_alias = @target_alias@
! 236: target_cpu = @target_cpu@
! 237: target_os = @target_os@
! 238: target_vendor = @target_vendor@
! 239: top_build_prefix = @top_build_prefix@
! 240: top_builddir = @top_builddir@
! 241: top_srcdir = @top_srcdir@
! 242: rcdir = @pkgsrcrcdir@
! 243: rc_SCRIPTS = bgpd.sh ospf6d.sh ospfd.sh ripd.sh ripngd.sh zebra.sh
! 244: all: all-am
! 245:
! 246: .SUFFIXES:
! 247: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 248: @for dep in $?; do \
! 249: case '$(am__configure_deps)' in \
! 250: *$$dep*) \
! 251: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 252: && { if test -f $@; then exit 0; else break; fi; }; \
! 253: exit 1;; \
! 254: esac; \
! 255: done; \
! 256: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu pkgsrc/Makefile'; \
! 257: $(am__cd) $(top_srcdir) && \
! 258: $(AUTOMAKE) --gnu pkgsrc/Makefile
! 259: .PRECIOUS: Makefile
! 260: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 261: @case '$?' in \
! 262: *config.status*) \
! 263: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 264: *) \
! 265: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 266: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 267: esac;
! 268:
! 269: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 270: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 271:
! 272: $(top_srcdir)/configure: $(am__configure_deps)
! 273: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 274: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 275: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 276: $(am__aclocal_m4_deps):
! 277: bgpd.sh: $(top_builddir)/config.status $(srcdir)/bgpd.sh.in
! 278: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 279: ospf6d.sh: $(top_builddir)/config.status $(srcdir)/ospf6d.sh.in
! 280: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 281: ospfd.sh: $(top_builddir)/config.status $(srcdir)/ospfd.sh.in
! 282: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 283: ripd.sh: $(top_builddir)/config.status $(srcdir)/ripd.sh.in
! 284: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 285: ripngd.sh: $(top_builddir)/config.status $(srcdir)/ripngd.sh.in
! 286: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 287: zebra.sh: $(top_builddir)/config.status $(srcdir)/zebra.sh.in
! 288: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
! 289: install-rcSCRIPTS: $(rc_SCRIPTS)
! 290: @$(NORMAL_INSTALL)
! 291: test -z "$(rcdir)" || $(MKDIR_P) "$(DESTDIR)$(rcdir)"
! 292: @list='$(rc_SCRIPTS)'; test -n "$(rcdir)" || list=; \
! 293: for p in $$list; do \
! 294: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 295: if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
! 296: done | \
! 297: sed -e 'p;s,.*/,,;n' \
! 298: -e 'h;s|.*|.|' \
! 299: -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
! 300: $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
! 301: { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
! 302: if ($$2 == $$4) { files[d] = files[d] " " $$1; \
! 303: if (++n[d] == $(am__install_max)) { \
! 304: print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
! 305: else { print "f", d "/" $$4, $$1 } } \
! 306: END { for (d in files) print "f", d, files[d] }' | \
! 307: while read type dir files; do \
! 308: if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
! 309: test -z "$$files" || { \
! 310: echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(rcdir)$$dir'"; \
! 311: $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(rcdir)$$dir" || exit $$?; \
! 312: } \
! 313: ; done
! 314:
! 315: uninstall-rcSCRIPTS:
! 316: @$(NORMAL_UNINSTALL)
! 317: @list='$(rc_SCRIPTS)'; test -n "$(rcdir)" || exit 0; \
! 318: files=`for p in $$list; do echo "$$p"; done | \
! 319: sed -e 's,.*/,,;$(transform)'`; \
! 320: test -n "$$list" || exit 0; \
! 321: echo " ( cd '$(DESTDIR)$(rcdir)' && rm -f" $$files ")"; \
! 322: cd "$(DESTDIR)$(rcdir)" && rm -f $$files
! 323:
! 324: mostlyclean-libtool:
! 325: -rm -f *.lo
! 326:
! 327: clean-libtool:
! 328: -rm -rf .libs _libs
! 329: tags: TAGS
! 330: TAGS:
! 331:
! 332: ctags: CTAGS
! 333: CTAGS:
! 334:
! 335:
! 336: distdir: $(DISTFILES)
! 337: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 338: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 339: list='$(DISTFILES)'; \
! 340: dist_files=`for file in $$list; do echo $$file; done | \
! 341: sed -e "s|^$$srcdirstrip/||;t" \
! 342: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 343: case $$dist_files in \
! 344: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 345: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 346: sort -u` ;; \
! 347: esac; \
! 348: for file in $$dist_files; do \
! 349: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 350: if test -d $$d/$$file; then \
! 351: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 352: if test -d "$(distdir)/$$file"; then \
! 353: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 354: fi; \
! 355: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 356: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 357: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 358: fi; \
! 359: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 360: else \
! 361: test -f "$(distdir)/$$file" \
! 362: || cp -p $$d/$$file "$(distdir)/$$file" \
! 363: || exit 1; \
! 364: fi; \
! 365: done
! 366: check-am: all-am
! 367: check: check-am
! 368: all-am: Makefile $(SCRIPTS)
! 369: installdirs:
! 370: for dir in "$(DESTDIR)$(rcdir)"; do \
! 371: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 372: done
! 373: install: install-am
! 374: install-exec: install-exec-am
! 375: install-data: install-data-am
! 376: uninstall: uninstall-am
! 377:
! 378: install-am: all-am
! 379: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 380:
! 381: installcheck: installcheck-am
! 382: install-strip:
! 383: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 384: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 385: `test -z '$(STRIP)' || \
! 386: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 387: mostlyclean-generic:
! 388:
! 389: clean-generic:
! 390:
! 391: distclean-generic:
! 392: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 393: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 394:
! 395: maintainer-clean-generic:
! 396: @echo "This command is intended for maintainers to use"
! 397: @echo "it deletes files that may require special tools to rebuild."
! 398: clean: clean-am
! 399:
! 400: clean-am: clean-generic clean-libtool mostlyclean-am
! 401:
! 402: distclean: distclean-am
! 403: -rm -f Makefile
! 404: distclean-am: clean-am distclean-generic
! 405:
! 406: dvi: dvi-am
! 407:
! 408: dvi-am:
! 409:
! 410: html: html-am
! 411:
! 412: html-am:
! 413:
! 414: info: info-am
! 415:
! 416: info-am:
! 417:
! 418: install-data-am: install-rcSCRIPTS
! 419:
! 420: install-dvi: install-dvi-am
! 421:
! 422: install-dvi-am:
! 423:
! 424: install-exec-am:
! 425:
! 426: install-html: install-html-am
! 427:
! 428: install-html-am:
! 429:
! 430: install-info: install-info-am
! 431:
! 432: install-info-am:
! 433:
! 434: install-man:
! 435:
! 436: install-pdf: install-pdf-am
! 437:
! 438: install-pdf-am:
! 439:
! 440: install-ps: install-ps-am
! 441:
! 442: install-ps-am:
! 443:
! 444: installcheck-am:
! 445:
! 446: maintainer-clean: maintainer-clean-am
! 447: -rm -f Makefile
! 448: maintainer-clean-am: distclean-am maintainer-clean-generic
! 449:
! 450: mostlyclean: mostlyclean-am
! 451:
! 452: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 453:
! 454: pdf: pdf-am
! 455:
! 456: pdf-am:
! 457:
! 458: ps: ps-am
! 459:
! 460: ps-am:
! 461:
! 462: uninstall-am: uninstall-rcSCRIPTS
! 463:
! 464: .MAKE: install-am install-strip
! 465:
! 466: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
! 467: distclean distclean-generic distclean-libtool distdir dvi \
! 468: dvi-am html html-am info info-am install install-am \
! 469: install-data install-data-am install-dvi install-dvi-am \
! 470: install-exec install-exec-am install-html install-html-am \
! 471: install-info install-info-am install-man install-pdf \
! 472: install-pdf-am install-ps install-ps-am install-rcSCRIPTS \
! 473: install-strip installcheck installcheck-am installdirs \
! 474: maintainer-clean maintainer-clean-generic mostlyclean \
! 475: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
! 476: uninstall uninstall-am uninstall-rcSCRIPTS
! 477:
! 478:
! 479: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 480: # Otherwise a system limit (for SysV at least) may be exceeded.
! 481: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / pkgsrc