Annotation of embedaddon/quagga/solaris/Makefile.in, revision 1.1.1.1
1.1 misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17:
18: # Solaris packages automake file
19:
20: # XXX This file uses GNU make extensions.
21: VPATH = @srcdir@
22: pkgdatadir = $(datadir)/@PACKAGE@
23: pkgincludedir = $(includedir)/@PACKAGE@
24: pkglibdir = $(libdir)/@PACKAGE@
25: pkglibexecdir = $(libexecdir)/@PACKAGE@
26: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
27: install_sh_DATA = $(install_sh) -c -m 644
28: install_sh_PROGRAM = $(install_sh) -c
29: install_sh_SCRIPT = $(install_sh) -c
30: INSTALL_HEADER = $(INSTALL_DATA)
31: transform = $(program_transform_name)
32: NORMAL_INSTALL = :
33: PRE_INSTALL = :
34: POST_INSTALL = :
35: NORMAL_UNINSTALL = :
36: PRE_UNINSTALL = :
37: POST_UNINSTALL = :
38: build_triplet = @build@
39: host_triplet = @host@
40: target_triplet = @target@
41: subdir = solaris
42: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
43: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
44: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
45: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
46: $(ACLOCAL_M4)
47: mkinstalldirs = $(install_sh) -d
48: CONFIG_HEADER = $(top_builddir)/config.h
49: CONFIG_CLEAN_FILES =
50: CONFIG_CLEAN_VPATH_FILES =
51: SOURCES =
52: DIST_SOURCES =
53: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
54: ACLOCAL = @ACLOCAL@
55: AMTAR = @AMTAR@
56: AR = @AR@
57: AUTOCONF = @AUTOCONF@
58: AUTOHEADER = @AUTOHEADER@
59: AUTOMAKE = @AUTOMAKE@
60: AWK = @AWK@
61: BGPD = @BGPD@
62: CC = @CC@
63: CCDEPMODE = @CCDEPMODE@
64: CFLAGS = @CFLAGS@
65: CONFDATE = @CONFDATE@
66: CPP = @CPP@
67: CPPFLAGS = @CPPFLAGS@
68: CURSES = @CURSES@
69: CYGPATH_W = @CYGPATH_W@
70: DEFS = @DEFS@
71: DEPDIR = @DEPDIR@
72: DLLTOOL = @DLLTOOL@
73: DOC = @DOC@
74: DSYMUTIL = @DSYMUTIL@
75: DUMPBIN = @DUMPBIN@
76: ECHO_C = @ECHO_C@
77: ECHO_N = @ECHO_N@
78: ECHO_T = @ECHO_T@
79: EGREP = @EGREP@
80: EXEEXT = @EXEEXT@
81: FGREP = @FGREP@
82: GAWK = @GAWK@
83: GREP = @GREP@
84: HAVE_LIBPCREPOSIX = @HAVE_LIBPCREPOSIX@
85: IF_METHOD = @IF_METHOD@
86: IF_PROC = @IF_PROC@
87: INCLUDES = @INCLUDES@
88: INSTALL = @INSTALL@
89: INSTALL_DATA = @INSTALL_DATA@
90: INSTALL_PROGRAM = @INSTALL_PROGRAM@
91: INSTALL_SCRIPT = @INSTALL_SCRIPT@
92: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
93: IOCTL_METHOD = @IOCTL_METHOD@
94: IPFORWARD = @IPFORWARD@
95: ISISD = @ISISD@
96: ISIS_TOPOLOGY_DIR = @ISIS_TOPOLOGY_DIR@
97: ISIS_TOPOLOGY_INCLUDES = @ISIS_TOPOLOGY_INCLUDES@
98: ISIS_TOPOLOGY_LIB = @ISIS_TOPOLOGY_LIB@
99: KERNEL_METHOD = @KERNEL_METHOD@
100: LD = @LD@
101: LDFLAGS = @LDFLAGS@
102: LIBCAP = @LIBCAP@
103: LIBM = @LIBM@
104: LIBOBJS = @LIBOBJS@
105: LIBPAM = @LIBPAM@
106: LIBREADLINE = @LIBREADLINE@
107: LIBS = @LIBS@
108: LIBTOOL = @LIBTOOL@
109: LIB_IPV6 = @LIB_IPV6@
110: LIB_REGEX = @LIB_REGEX@
111: LIPO = @LIPO@
112: LN_S = @LN_S@
113: LTLIBOBJS = @LTLIBOBJS@
114: MAKEINFO = @MAKEINFO@
115: MANIFEST_TOOL = @MANIFEST_TOOL@
116: MKDIR_P = @MKDIR_P@
117: MULTIPATH_NUM = @MULTIPATH_NUM@
118: NM = @NM@
119: NMEDIT = @NMEDIT@
120: OBJDUMP = @OBJDUMP@
121: OBJEXT = @OBJEXT@
122: OSPF6D = @OSPF6D@
123: OSPFAPI = @OSPFAPI@
124: OSPFCLIENT = @OSPFCLIENT@
125: OSPFD = @OSPFD@
126: OTHER_METHOD = @OTHER_METHOD@
127: OTOOL = @OTOOL@
128: OTOOL64 = @OTOOL64@
129: PACKAGE = @PACKAGE@
130: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
131: PACKAGE_NAME = @PACKAGE_NAME@
132: PACKAGE_STRING = @PACKAGE_STRING@
133: PACKAGE_TARNAME = @PACKAGE_TARNAME@
134: PACKAGE_URL = @PACKAGE_URL@
135: PACKAGE_VERSION = @PACKAGE_VERSION@
136: PATH_SEPARATOR = @PATH_SEPARATOR@
137: PERL = @PERL@
138: PICFLAGS = @PICFLAGS@
139: PILDFLAGS = @PILDFLAGS@
140: RANLIB = @RANLIB@
141: RIPD = @RIPD@
142: RIPNGD = @RIPNGD@
143: RTREAD_METHOD = @RTREAD_METHOD@
144: RT_METHOD = @RT_METHOD@
145: SED = @SED@
146: SET_MAKE = @SET_MAKE@
147: SHELL = @SHELL@
148: SNMP_INCLUDES = @SNMP_INCLUDES@
149: SOLARIS = @SOLARIS@
150: STRIP = @STRIP@
151: VERSION = @VERSION@
152: VTYSH = @VTYSH@
153: WATCHQUAGGA = @WATCHQUAGGA@
154: ZEBRA = @ZEBRA@
155: abs_builddir = @abs_builddir@
156: abs_srcdir = @abs_srcdir@
157: abs_top_builddir = @abs_top_builddir@
158: abs_top_srcdir = @abs_top_srcdir@
159: ac_ct_AR = @ac_ct_AR@
160: ac_ct_CC = @ac_ct_CC@
161: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
162: am__include = @am__include@
163: am__leading_dot = @am__leading_dot@
164: am__quote = @am__quote@
165: am__tar = @am__tar@
166: am__untar = @am__untar@
167: bindir = @bindir@
168: build = @build@
169: build_alias = @build_alias@
170: build_cpu = @build_cpu@
171: build_os = @build_os@
172: build_vendor = @build_vendor@
173: builddir = @builddir@
174: datadir = @datadir@
175: datarootdir = @datarootdir@
176: docdir = @docdir@
177: dvidir = @dvidir@
178: enable_group = @enable_group@
179: enable_user = @enable_user@
180: enable_vty_group = @enable_vty_group@
181: exampledir = @exampledir@
182: exec_prefix = @exec_prefix@
183: host = @host@
184: host_alias = @host_alias@
185: host_cpu = @host_cpu@
186: host_os = @host_os@
187: host_vendor = @host_vendor@
188: htmldir = @htmldir@
189: includedir = @includedir@
190: infodir = @infodir@
191: install_sh = @install_sh@
192: libdir = @libdir@
193: libexecdir = @libexecdir@
194: localedir = @localedir@
195: localstatedir = @localstatedir@
196: mandir = @mandir@
197: mkdir_p = @mkdir_p@
198: oldincludedir = @oldincludedir@
199: pdfdir = @pdfdir@
200: pkgsrcdir = @pkgsrcdir@
201: pkgsrcrcdir = @pkgsrcrcdir@
202: prefix = @prefix@
203: program_transform_name = @program_transform_name@
204: psdir = @psdir@
205: quagga_statedir = @quagga_statedir@
206: sbindir = @sbindir@
207: sharedstatedir = @sharedstatedir@
208: srcdir = @srcdir@
209: sysconfdir = @sysconfdir@
210: target = @target@
211: target_alias = @target_alias@
212: target_cpu = @target_cpu@
213: target_os = @target_os@
214: target_vendor = @target_vendor@
215: top_build_prefix = @top_build_prefix@
216: top_builddir = @top_builddir@
217: top_srcdir = @top_srcdir@
218:
219: # the names of the various subpackages, and some convenient
220: # derived variables.
221: pkg_names = daemons dev doc libs smf
222: pkg_quagga_daemons = zebra bgpd ospfd ospf6d ripd ripngd
223: pkg_name_rev = @PACKAGE_VERSION@-@CONFDATE@-@target_os@-@target_cpu@
224: pkg_depends = $(pkg_names:%=depend.%)
225: pkg_packages = $(pkg_names:%=@PACKAGE_TARNAME@-%-$(pkg_name_rev).pkg)
226: pkg_pkginfos = $(pkg_names:%=pkginfo.%.full)
227: pkg_prototypes = $(pkg_names:%=prototype.%)
228: pkg_manifests = quagga.xml
229:
230: # pkgmk variable substitutions wont grok ${variable} in prototype
231: # file, so we cant let autoconf generate the file sadly
232: # wish automake would just provide a template for this
233: edit = $(SED) \
234: -e 's,@prefix\@,$(prefix),g' \
235: -e 's,@exec_prefix,$(exec_prefix),g' \
236: -e 's,@bindir\@,$(bindir),g' \
237: -e 's,@sbindir\@,$(sbindir),g' \
238: -e 's,@libexecdir\@,$(libexecdir),g' \
239: -e 's,@datadir\@,$(datadir),g' \
240: -e 's,@sysconfdir\@,$(sysconfdir),g' \
241: -e 's,@sharedstatedir\@,$(sharedstatedir),g' \
242: -e 's,@localstatedir\@,$(localstatedir),g' \
243: -e 's,@libdir\@,$(libdir),g' \
244: -e 's,@includedir\@,$(includedir),g' \
245: -e 's,@infodir\@,$(infodir),g' \
246: -e 's,@mandir\@,$(mandir),g' \
247: -e 's,@enable_user\@,$(enable_user),g' \
248: -e 's,@enable_group\@,$(enable_group),g' \
249: -e 's,@enable_vty_group\@,$(enable_vty_group),g' \
250: -e 's,@quagga_statedir\@,$(quagga_statedir),g' \
251: -e 's,[@]PACKAGE_NAME[@],@PACKAGE_NAME@,g' \
252: -e 's,[@]PACKAGE_TARNAME[@],@PACKAGE_TARNAME@,g' \
253: -e 's,[@]PACKAGE_VERSION[@],@PACKAGE_VERSION@,g' \
254: -e 's,[@]PACKAGE_BUGREPORT[@],@PACKAGE_BUGREPORT@,g' \
255: -e 's,[@]CONFDATE[@],@CONFDATE@,g' \
256: -e 's,[@]target_cpu[@],$(target_cpu),g' \
257: -e 's,[@]target_host[@],$(target_host),g' \
258: -e 's,[@]target_os[@],$(target_os),g'
259:
260:
261: # common options for pkgmk
262: pkg_make_vars = exec_prefix=@exec_prefix@ prefix=@prefix@ \
263: builddir=@builddir@ srcdir=@srcdir@ \
264: top_builddir=@top_builddir@ top_srcdir=@top_srcdir@ \
265: abs_builddir=@abs_builddir@ abs_srcdir=@abs_srcdir@ \
266: abs_top_builddir=@abs_top_builddir@ abs_top_srcdir=@abs_top_srcdir@
267:
268:
269: # pkgmk: write the package to spool in build dir, to avoid root dependencies
270: pkg_make = pkgmk -o -d @abs_builddir@ \
271: -f $< DESTDIR="$(DESTDIR)/" $(pkg_make_vars)
272:
273:
274: # pkgtrans: write a pkg file stream, shame we cant pipe directly to it from
275: # pkgmk..
276: pkg_trans = pkgtrans -s @abs_builddir@ "@abs_builddir@/$@"
277:
278: # pkginfo.package and prototype.package are all built sources
279: #BUILT_SOURCES = pkginfo.daemons pkginfo.dev pkginfo.doc pkginfo.libs \
280: # prototype.daemons prototype.dev prototype.doc prototype.libs
281: BUILT_SOURCES = $(pkg_pkginfos) pkginfo.tmpl $(pkg_prototypes) \
282: $(pkg_manifests) $(pkg_depends) quagga.init
283:
284: CLEANFILES = $(BUILT_SOURCES) $(pkg_packages)
285: EXTRA_DIST = $(pkg_manifests:%=%.in) $(pkg_prototypes:%=%.in) \
286: $(pkg_names:%=pkginfo.%.tmpl.in) $(srcdir)/pkginfo.tmpl.in \
287: $(pkg_depends:%=%.in) quagga.init.in README.txt
288:
289: all: $(BUILT_SOURCES)
290: $(MAKE) $(AM_MAKEFLAGS) all-am
291:
292: .SUFFIXES:
293: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
294: @for dep in $?; do \
295: case '$(am__configure_deps)' in \
296: *$$dep*) \
297: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
298: && { if test -f $@; then exit 0; else break; fi; }; \
299: exit 1;; \
300: esac; \
301: done; \
302: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu solaris/Makefile'; \
303: $(am__cd) $(top_srcdir) && \
304: $(AUTOMAKE) --gnu solaris/Makefile
305: .PRECIOUS: Makefile
306: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
307: @case '$?' in \
308: *config.status*) \
309: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
310: *) \
311: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
312: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
313: esac;
314:
315: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
316: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
317:
318: $(top_srcdir)/configure: $(am__configure_deps)
319: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
320: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
321: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
322: $(am__aclocal_m4_deps):
323:
324: mostlyclean-libtool:
325: -rm -f *.lo
326:
327: clean-libtool:
328: -rm -rf .libs _libs
329: tags: TAGS
330: TAGS:
331:
332: ctags: CTAGS
333: CTAGS:
334:
335:
336: distdir: $(DISTFILES)
337: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
338: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
339: list='$(DISTFILES)'; \
340: dist_files=`for file in $$list; do echo $$file; done | \
341: sed -e "s|^$$srcdirstrip/||;t" \
342: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
343: case $$dist_files in \
344: */*) $(MKDIR_P) `echo "$$dist_files" | \
345: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
346: sort -u` ;; \
347: esac; \
348: for file in $$dist_files; do \
349: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
350: if test -d $$d/$$file; then \
351: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
352: if test -d "$(distdir)/$$file"; then \
353: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
354: fi; \
355: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
356: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
357: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
358: fi; \
359: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
360: else \
361: test -f "$(distdir)/$$file" \
362: || cp -p $$d/$$file "$(distdir)/$$file" \
363: || exit 1; \
364: fi; \
365: done
366: check-am: all-am
367: check: $(BUILT_SOURCES)
368: $(MAKE) $(AM_MAKEFLAGS) check-am
369: all-am: Makefile
370: installdirs:
371: install: $(BUILT_SOURCES)
372: $(MAKE) $(AM_MAKEFLAGS) install-am
373: install-exec: install-exec-am
374: install-data: install-data-am
375: uninstall: uninstall-am
376:
377: install-am: all-am
378: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
379:
380: installcheck: installcheck-am
381: install-strip:
382: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
383: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
384: `test -z '$(STRIP)' || \
385: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
386: mostlyclean-generic:
387:
388: clean-generic:
389: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
390:
391: distclean-generic:
392: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
393: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
394:
395: maintainer-clean-generic:
396: @echo "This command is intended for maintainers to use"
397: @echo "it deletes files that may require special tools to rebuild."
398: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
399: clean: clean-am
400:
401: clean-am: clean-generic clean-libtool mostlyclean-am
402:
403: distclean: distclean-am
404: -rm -f Makefile
405: distclean-am: clean-am distclean-generic
406:
407: dvi: dvi-am
408:
409: dvi-am:
410:
411: html: html-am
412:
413: html-am:
414:
415: info: info-am
416:
417: info-am:
418:
419: install-data-am:
420:
421: install-dvi: install-dvi-am
422:
423: install-dvi-am:
424:
425: install-exec-am:
426:
427: install-html: install-html-am
428:
429: install-html-am:
430:
431: install-info: install-info-am
432:
433: install-info-am:
434:
435: install-man:
436:
437: install-pdf: install-pdf-am
438:
439: install-pdf-am:
440:
441: install-ps: install-ps-am
442:
443: install-ps-am:
444:
445: installcheck-am:
446:
447: maintainer-clean: maintainer-clean-am
448: -rm -f Makefile
449: maintainer-clean-am: distclean-am maintainer-clean-generic
450:
451: mostlyclean: mostlyclean-am
452:
453: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
454:
455: pdf: pdf-am
456:
457: pdf-am:
458:
459: ps: ps-am
460:
461: ps-am:
462:
463: uninstall-am:
464:
465: .MAKE: all check install install-am install-strip
466:
467: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
468: distclean distclean-generic distclean-libtool distdir dvi \
469: dvi-am html html-am info info-am install install-am \
470: install-data install-data-am install-dvi install-dvi-am \
471: install-exec install-exec-am install-html install-html-am \
472: install-info install-info-am install-man install-pdf \
473: install-pdf-am install-ps install-ps-am install-strip \
474: installcheck installcheck-am installdirs maintainer-clean \
475: maintainer-clean-generic mostlyclean mostlyclean-generic \
476: mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
477:
478:
479: .PHONY: packages
480:
481: # pkgmk can only cope with a single pkginfo, cant 'stack' various
482: # pkginfo template files and a package specific pkginfo file in the prototype
483: # Create the package specific template here, and create the full pkginfo
484: # by cating this and the common pkginfo.tmpl together.
485: pkginfo.tmpl: $(srcdir)/pkginfo.tmpl.in Makefile
486: rm -f $@
487: $(edit) $< > $@
488:
489: pkginfo.%.tmpl: $(srcdir)/pkginfo.%.tmpl.in Makefile
490: rm -f $@
491: $(edit) $< > $@
492:
493: pkginfo.%.full: pkginfo.%.tmpl pkginfo.tmpl Makefile
494: cat pkginfo.tmpl pkginfo.$*.tmpl > $@
495:
496: # use 'edit' above to transform prototype.in to pkgmk acceptable prototype
497: prototype.%: $(srcdir)/prototype.%.in Makefile
498: rm -f $@
499: $(edit) $< > $@
500:
501: # use edit to construct the SMF manifest files
502: %.xml: $(srcdir)/%.xml.in Makefile
503: rm -f $@
504: $(edit) $< > $@
505: # use edit to construct the depend files
506: depend.%: $(srcdir)/depend.%.in Makefile
507: rm -f $@
508: $(edit) $< > $@
509:
510: # method file (bit like init script)
511: quagga.init: $(srcdir)/quagga.init.in Makefile
512: rm -f $@
513: $(edit) $< > $@
514:
515: # construct the pkg
516: @PACKAGE_TARNAME@-%-$(pkg_name_rev).pkg: prototype.% \
517: depend.% quagga.init pkginfo.%.full
518: ($(pkg_make) && \
519: $(pkg_trans) "QUAGGA$*")
520:
521: %.pkg.gz : %.pkg
522: (gzip -c $< > $@)
523:
524: pkg-root-install:
525: (cd $(top_builddir) && \
526: $(MAKE) DESTDIR=$(abs_builddir)/quagga-root install)
527:
528: packages: $(pkg_packages)
529:
530: #nodist_pkgdata_DATA = $(pkg_packages)
531:
532: # Tell versions [3.59,3.63) of GNU make to not export all variables.
533: # Otherwise a system limit (for SysV at least) may be exceeded.
534: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / quagga / solaris