--- embedaddon/readline/doc/readline.html 2014/07/30 08:16:46 1.1 +++ embedaddon/readline/doc/readline.html 2021/03/17 01:01:01 1.1.1.2 @@ -1,6 +1,6 @@ - +
- +
beginning-of-line (C-a) -
+
Move to the start of the current line.

- +

end-of-line (C-e) -
+
Move to the end of the line.

- +

forward-char (C-f) -
+
Move forward a character.

- +

backward-char (C-b) -
+
Move back a character.

- +

forward-word (M-f) -
+
Move forward to the end of the next word. Words are composed of letters and digits.

- +

backward-word (M-b) -
+
Move back to the start of the current or previous word. Words are composed of letters and digits.

- + +

previous-screen-line () +
+Attempt to move point to the same physical screen column on the previous +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if point is not +greater than the length of the prompt plus the screen width. +

+ + +

next-screen-line () +
+Attempt to move point to the same physical screen column on the next +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if the length +of the current Readline line is not greater than the length of the prompt +plus the screen width. +

+ + +

clear-display (M-C-l) +
+Clear the screen and, if possible, the terminal's scrollback buffer, +then redraw the current line, +leaving the current line at the top of the screen. +

+ +

clear-screen (C-l) -
-Clear the screen and redraw the current line, +
+Clear the screen, +then redraw the current line, leaving the current line at the top of the screen.

- +

redraw-current-line () -
+
Refresh the current line. By default, this is unbound.

@@ -1385,9 +1528,9 @@ Refresh the current line. By default, this is unbound

- +
accept-line (Newline or Return) -
+
Accept the line regardless of where the cursor is. If this line is non-empty, it may be added to the history list for future recall with @@ -1396,64 +1539,68 @@ If this line is a modified history line, the history l to its original state.

- +

previous-history (C-p) -
+
Move `back' through the history list, fetching the previous command.

- +

next-history (C-n) -
+
Move `forward' through the history list, fetching the next command.

- +

beginning-of-history (M-<) -
+
Move to the first line in the history.

- +

end-of-history (M->) -
+
Move to the end of the input history, i.e., the line currently being entered.

- +

reverse-search-history (C-r) -
+
Search backward starting at the current line and moving `up' through the history as necessary. This is an incremental search. +This command sets the region to the matched text and activates the mark.

- +

forward-search-history (C-s) -
+
Search forward starting at the current line and moving `down' through -the the history as necessary. This is an incremental search. +the history as necessary. This is an incremental search. +This command sets the region to the matched text and activates the mark.

- +

non-incremental-reverse-search-history (M-p) -
+
Search backward starting at the current line and moving `up' through the history as necessary using a non-incremental search for a string supplied by the user. +The search string may match anywhere in a history line.

- +

non-incremental-forward-search-history (M-n) -
+
Search forward starting at the current line and moving `down' -through the the history as necessary using a non-incremental search +through the history as necessary using a non-incremental search for a string supplied by the user. +The search string may match anywhere in a history line.

- +

history-search-forward () -
+
Search forward through the history for the string of characters between the start of the current line and the point. The search string must match at the beginning of a history line. @@ -1461,9 +1608,9 @@ This is a non-incremental search. By default, this command is unbound.

- +

history-search-backward () -
+
Search backward through the history for the string of characters between the start of the current line and the point. The search string must match at the beginning of a history line. @@ -1471,9 +1618,9 @@ This is a non-incremental search. By default, this command is unbound.

- -

history-substr-search-forward () -
+ +
history-substring-search-forward () +
Search forward through the history for the string of characters between the start of the current line and the point. The search string may match anywhere in a history line. @@ -1481,9 +1628,9 @@ This is a non-incremental search. By default, this command is unbound.

- -

history-substr-search-backward () -
+ +
history-substring-search-backward () +
Search backward through the history for the string of characters between the start of the current line and the point. The search string may match anywhere in a history line. @@ -1491,9 +1638,9 @@ This is a non-incremental search. By default, this command is unbound.

- +

yank-nth-arg (M-C-y) -
+
Insert the first argument to the previous command (usually the second word on the previous line) at point. With an argument n, @@ -1504,9 +1651,9 @@ Once the argument n is computed, the argume as if the `!n' history expansion had been specified.

- +

yank-last-arg (M-. or M-_) -
+
Insert last argument to the previous command (the last word of the previous history entry). With a numeric argument, behave exactly like yank-nth-arg. @@ -1520,6 +1667,17 @@ The history expansion facilities are used to extract t as if the `!$' history expansion had been specified.

+ +

operate-and-get-next (C-o) +
+Accept the current line for return to the calling application as if a +newline had been entered, +and fetch the next line relative to the current line from the history +for editing. +A numeric argument, if supplied, specifies the history entry to use instead +of the current line. +

+

@@ -1543,60 +1701,77 @@ as if the `!$' history expansion had been

- +
end-of-file (usually C-d) -
+
The character indicating end-of-file as set, for example, by stty. If this character is read when there are no characters on the line, and point is at the beginning of the line, Readline interprets it as the end of input and returns EOF.

- +

delete-char (C-d) -
+
Delete the character at point. If this function is bound to the same character as the tty EOF character, as C-d commonly is, see above for the effects.

- +

backward-delete-char (Rubout) -
+
Delete the character behind the cursor. A numeric argument means to kill the characters instead of deleting them.

- +

forward-backward-delete-char () -
+
Delete the character under the cursor, unless the cursor is at the end of the line, in which case the character behind the cursor is deleted. By default, this is not bound to a key.

- +

quoted-insert (C-q or C-v) -
+
Add the next character typed to the line verbatim. This is how to insert key sequences like C-q, for example.

- +

tab-insert (M-TAB) -
+
Insert a tab character.

- +

self-insert (a, b, A, 1, !, ...) -
+
Insert yourself.

- + +

bracketed-paste-begin () +
+This function is intended to be bound to the "bracketed paste" escape +sequence sent by some terminals, and such a binding is assigned by default. +It allows Readline to insert the pasted text as a single unit without treating +each character as if it had been read from the keyboard. The characters +are inserted as if each one was bound to self-insert instead of +executing any editing commands. +

+ +Bracketed paste sets the region (the characters between point and the mark) +to the inserted text. It uses the concept of an active mark: when the +mark is active, Readline redisplay uses the terminal's standout mode to +denote the region. +

+ +

transpose-chars (C-t) -
+
Drag the character before the cursor forward over the character at the cursor, moving the cursor forward as well. If the insertion point @@ -1605,39 +1780,39 @@ transposes the last two characters of the line. Negative arguments have no effect.

- +

transpose-words (M-t) -
+
Drag the word before point past the word after point, moving point past that word as well. If the insertion point is at the end of the line, this transposes the last two words on the line.

- +

upcase-word (M-u) -
+
Uppercase the current (or following) word. With a negative argument, uppercase the previous word, but do not move the cursor.

- +

downcase-word (M-l) -
+
Lowercase the current (or following) word. With a negative argument, lowercase the previous word, but do not move the cursor.

- +

capitalize-word (M-c) -
+
Capitalize the current (or following) word. With a negative argument, capitalize the previous word, but do not move the cursor.

- +

overwrite-mode () -
+
Toggle overwrite mode. With an explicit positive numeric argument, switches to overwrite mode. With an explicit non-positive numeric argument, switches to insert mode. This command affects only @@ -1677,106 +1852,121 @@ By default, this command is unbound.
- +
kill-line (C-k) -
+
Kill the text from point to the end of the line. +With a negative numeric argument, kill backward from the cursor to the +beginning of the current line.

- +

backward-kill-line (C-x Rubout) -
-Kill backward to the beginning of the line. +
+Kill backward from the cursor to the beginning of the current line. +With a negative numeric argument, kill forward from the cursor to the +end of the current line.

- +

unix-line-discard (C-u) -
+
Kill backward from the cursor to the beginning of the current line.

- +

kill-whole-line () -
+
Kill all characters on the current line, no matter where point is. By default, this is unbound.

- +

kill-word (M-d) -
+
Kill from point to the end of the current word, or if between words, to the end of the next word. Word boundaries are the same as forward-word.

- +

backward-kill-word (M-DEL) -
+
Kill the word behind point. Word boundaries are the same as backward-word.

- + +

shell-transpose-words (M-C-t) +
+Drag the word before point past the word after point, +moving point past that word as well. +If the insertion point is at the end of the line, this transposes +the last two words on the line. +Word boundaries are the same as shell-forward-word and +shell-backward-word. +

+ +

unix-word-rubout (C-w) -
+
Kill the word behind point, using white space as a word boundary. The killed text is saved on the kill-ring.

- +

unix-filename-rubout () -
+
Kill the word behind point, using white space and the slash character as the word boundaries. The killed text is saved on the kill-ring.

- +

delete-horizontal-space () -
+
Delete all spaces and tabs around point. By default, this is unbound.

- +

kill-region () -
+
Kill the text in the current region. By default, this command is unbound.

- +

copy-region-as-kill () -
+
Copy the text in the region to the kill buffer, so it can be yanked right away. By default, this command is unbound.

- +

copy-backward-word () -
+
Copy the word before point to the kill buffer. The word boundaries are the same as backward-word. By default, this command is unbound.

- +

copy-forward-word () -
+
Copy the word following point to the kill buffer. The word boundaries are the same as forward-word. By default, this command is unbound.

- +

yank (C-y) -
+
Yank the top of the kill ring into the buffer at point.

- +

yank-pop (M-y) -
+
Rotate the kill-ring, and yank the new top. You can only do this if the prior command is yank or yank-pop.
@@ -1800,23 +1990,23 @@ the prior command is yank or yank-p
- +
digit-argument (M-0, M-1, ... M--) -
+
Add this digit to the argument already accumulating, or start a new argument. M-- starts a negative argument.

- +

universal-argument () -
+
This is another way to specify an argument. If this command is followed by one or more digits, optionally with a leading minus sign, those digits define the argument. If the command is followed by digits, executing universal-argument again ends the numeric argument, but is otherwise ignored. As a special case, if this command is immediately followed by a -character that is neither a digit or minus sign, the argument count +character that is neither a digit nor minus sign, the argument count for the next command is multiplied by four. The argument count is initially one, so executing this function the first time makes the argument count four, a second time makes the @@ -1844,33 +2034,33 @@ By default, this is not bound to a key.

- +
complete (TAB) -
+
Attempt to perform completion on the text before point. The actual completion performed is application-specific. The default is filename completion.

- +

possible-completions (M-?) -
+
List the possible completions of the text before point. When displaying completions, Readline sets the number of columns used for display to the value of completion-display-width, the value of the environment variable COLUMNS, or the screen width, in that order.

- +

insert-completions (M-*) -
+
Insert all completions of the text before point that would have been generated by possible-completions.

- +

menu-complete () -
+
Similar to complete, but replaces the word to be completed with a single match from the list of possible completions. Repeated execution of menu-complete steps through the list @@ -1885,17 +2075,17 @@ This command is intended to be bound to TAB by default.

- +

menu-complete-backward () -
+
Identical to menu-complete, but moves backward through the list of possible completions, as if menu-complete had been given a negative argument.

- +

delete-char-or-list () -
+
Deletes the character under the cursor if not at the beginning or end of the line (like delete-char). If at the end of the line, behaves identically to @@ -1924,29 +2114,29 @@ This command is unbound by default.
- +
start-kbd-macro (C-x () -
+
Begin saving the characters typed into the current keyboard macro.

- +

end-kbd-macro (C-x )) -
+
Stop saving the characters typed into the current keyboard macro and save the definition.

- +

call-last-kbd-macro (C-x e) -
+
Re-execute the last keyboard macro defined, by making the characters in the macro appear as if typed at the keyboard.

- +

print-last-kbd-macro () -
+
Print the last keboard macro defined in a format suitable for the inputrc file.

@@ -1972,87 +2162,88 @@ Print the last keboard macro defined in a format suita

- +
re-read-init-file (C-x C-r) -
+
Read in the contents of the inputrc file, and incorporate any bindings or variable assignments found there.

- +

abort (C-g) -
+
Abort the current editing command and ring the terminal's bell (subject to the setting of bell-style).

- -

do-uppercase-version (M-a, M-b, M-x, ...) -
-If the metafied character x is lowercase, run the command -that is bound to the corresponding uppercase character. + +
do-lowercase-version (M-A, M-B, M-x, ...) +
+If the metafied character x is upper case, run the command +that is bound to the corresponding metafied lower case character. +The behavior is undefined if x is already lower case.

- +

prefix-meta (ESC) -
+
Metafy the next character typed. This is for keyboards without a meta key. Typing `ESC f' is equivalent to typing M-f.

- +

undo (C-_ or C-x C-u) -
+
Incremental undo, separately remembered for each line.

- +

revert-line (M-r) -
+
Undo all changes made to this line. This is like executing the undo command enough times to get back to the beginning.

- +

tilde-expand (M-~) -
+
Perform tilde expansion on the current word.

- +

set-mark (C-@) -
+
Set the mark to the point. If a numeric argument is supplied, the mark is set to that position.

- +

exchange-point-and-mark (C-x C-x) -
+
Swap the point with the mark. The current cursor position is set to the saved position, and the old cursor position is saved as the mark.

- +

character-search (C-]) -
+
A character is read and point is moved to the next occurrence of that character. A negative count searches for previous occurrences.

- +

character-search-backward (M-C-]) -
+
A character is read and point is moved to the previous occurrence of that character. A negative count searches for subsequent occurrences.

- +

skip-csi-sequence () -
+
Read enough characters to consume a multi-key sequence such as those defined for keys like Home and End. Such sequences begin with a Control Sequence Indicator (CSI), usually ESC-[. If this sequence is @@ -2062,9 +2253,9 @@ stray characters into the editing buffer. This is unb but usually bound to ESC-[.

- +

insert-comment (M-#) -
+
Without a numeric argument, the value of the comment-begin variable is inserted at the beginning of the current line. If a numeric argument is supplied, this command acts as a toggle: if @@ -2075,43 +2266,43 @@ the line. In either case, the line is accepted as if a newline had been typed.

- +

dump-functions () -
+
Print all of the functions and their key bindings to the Readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.

- +

dump-variables () -
+
Print all of the settable variables and their values to the Readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.

- +

dump-macros () -
+
Print all of the Readline key sequences bound to macros and the strings they output. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.

- +

emacs-editing-mode (C-e) -
+
When in vi command mode, this causes a switch to emacs editing mode.

- +

vi-editing-mode (M-C-j) -
+
When in emacs editing mode, this causes a switch to vi editing mode.

@@ -2162,7 +2353,7 @@ in the consistency of user interface across discrete p to provide a command line interface.

-Copyright (C) 1988--2014 Free Software Foundation, Inc. +Copyright (C) 1988--2020 Free Software Foundation, Inc.

Permission is granted to make and distribute verbatim copies of @@ -2246,8 +2437,8 @@ the simplest way possible, perhaps to replace calls in gets() or fgets().

- - + +

The function readline() prints a prompt prompt @@ -2273,6 +2464,13 @@ line is empty at that point, then (char *)NULL

+Readline performs some expansion on the prompt before it is +displayed on the screen. See the description of rl_expand_prompt +(see section 2.4.6 Redisplay) for additional details, especially if prompt +will contain characters that do not consume physical screen space when +displayed. +

+ If you want the user to be able to get at the line later, (with C-p for example), you must call add_history() to save the line away in a history list of such lines. @@ -2537,7 +2735,7 @@ negative argument.

A command function should return 0 if its action completes successfully, -and a non-zero value if some error occurs. +and a value greater than zero if some error occurs. This is the convention obeyed by all of the builtin Readline bindable command functions.

@@ -2563,7 +2761,7 @@ command functions. These variables are available to function writers.

- +

Variable: char * rl_line_buffer
This is the line gathered so far. You are welcome to modify the @@ -2573,7 +2771,7 @@ the memory allocated to rl_line_buffer.

- +

Variable: int rl_point
The offset of the current cursor position in rl_line_buffer @@ -2581,7 +2779,7 @@ the memory allocated to rl_line_buffer.

- +

Variable: int rl_end
The number of characters present in rl_line_buffer. When @@ -2590,7 +2788,7 @@ the memory allocated to rl_line_buffer.

- +

Variable: int rl_mark
The mark (saved position) in the current line. If set, the mark @@ -2598,7 +2796,7 @@ and point define a region.

- +

Variable: int rl_done
Setting this to a non-zero value causes Readline to return the current @@ -2606,7 +2804,7 @@ line immediately.

- +

Variable: int rl_num_chars_to_read
Setting this to a positive value before calling readline() causes @@ -2615,7 +2813,7 @@ than reading up to a character bound to accept-l

- +

Variable: int rl_pending_input
Setting this to a value makes it the next keystroke read. This is a @@ -2623,7 +2821,7 @@ way to stuff a single character into the input stream.

- +

Variable: int rl_dispatching
Set to a non-zero value if a function is being called from a key binding; @@ -2632,7 +2830,7 @@ they were called directly or by Readline's dispatching

- +

Variable: int rl_erase_empty_line
Setting this to a non-zero value causes Readline to completely erase @@ -2642,7 +2840,7 @@ the beginning of the newly-blank line.

- +

Variable: char * rl_prompt
The prompt Readline uses. This is set from the argument to @@ -2652,7 +2850,7 @@ be used to modify the prompt string after calling

- +

Variable: char * rl_display_prompt
The string displayed as the prompt. This is usually identical to @@ -2661,7 +2859,7 @@ use the prompt string as a message area, such as incre

- +

Variable: int rl_already_prompted
If an application wishes to display the prompt itself, rather than have @@ -2674,14 +2872,14 @@ never sets it.

- +

Variable: const char * rl_library_version
The version number of this revision of the library.

- +

Variable: int rl_readline_version
An integer encoding the current version of the library. The encoding is @@ -2692,7 +2890,7 @@ value 0x0402.

- +

Variable: int rl_gnu_readline_p
Always set to 1, denoting that this is GNU readline rather than some @@ -2700,7 +2898,7 @@ emulation.

- +

Variable: const char * rl_terminal_name
The terminal type, used for initialization. If not set by the application, @@ -2709,7 +2907,7 @@ the first time it is called.

- +

Variable: const char * rl_readline_name
This variable is set to a unique name by each application using Readline. @@ -2718,7 +2916,7 @@ The value allows conditional parsing of the inputrc fi

- +

Variable: FILE * rl_instream
The stdio stream from which Readline reads input. @@ -2726,7 +2924,7 @@ If NULL, Readline defaults to stdin<

- +

Variable: FILE * rl_outstream
The stdio stream to which Readline performs output. @@ -2734,7 +2932,7 @@ If NULL, Readline defaults to stdout

- +

Variable: int rl_prefer_env_winsize
If non-zero, Readline gives values found in the LINES and @@ -2743,7 +2941,7 @@ from the kernel when computing the screen dimensions.

- +

Variable: rl_command_func_t * rl_last_func
The address of the last command function Readline executed. May be used to @@ -2752,7 +2950,7 @@ example.

- +

Variable: rl_hook_func_t * rl_startup_hook
If non-zero, this is the address of a function to call just @@ -2760,7 +2958,7 @@ before readline prints the first prompt.

- +

Variable: rl_hook_func_t * rl_pre_input_hook
If non-zero, this is the address of a function to call after @@ -2769,7 +2967,7 @@ starts reading input characters.

- +

Variable: rl_hook_func_t * rl_event_hook
If non-zero, this is the address of a function to call periodically @@ -2779,7 +2977,7 @@ is no keyboard input.

- +

Variable: rl_getc_func_t * rl_getc_function
If non-zero, Readline will call indirectly through this pointer @@ -2791,7 +2989,7 @@ setting rl_input_available_hook as well.

- +

Variable: rl_hook_func_t * rl_signal_event_hook
If non-zero, this is the address of a function to call if a read system @@ -2799,7 +2997,7 @@ call is interrupted when Readline is reading terminal

- +

Variable: rl_hook_func_t * rl_input_available_hook
If non-zero, Readline will use this function's return value when it needs @@ -2824,7 +3022,7 @@ setting rl_input_available_hook as well.

- +

Variable: rl_voidfunc_t * rl_redisplay_function
If non-zero, Readline will call indirectly through this pointer @@ -2834,7 +3032,7 @@ redisplay function (see section +
Variable: rl_vintfunc_t * rl_prep_term_function
If non-zero, Readline will call indirectly through this pointer @@ -2845,7 +3043,7 @@ By default, this is set to rl_prep_terminal

- +

Variable: rl_voidfunc_t * rl_deprep_term_function
If non-zero, Readline will call indirectly through this pointer @@ -2856,7 +3054,7 @@ By default, this is set to rl_deprep_terminal

- +

Variable: Keymap rl_executing_keymap
This variable is set to the keymap (see section 2.4.2 Selecting a Keymap) in which the @@ -2864,7 +3062,7 @@ currently executing readline function was found.

- +

Variable: Keymap rl_binding_keymap
This variable is set to the keymap (see section 2.4.2 Selecting a Keymap) in which the @@ -2872,21 +3070,21 @@ last key binding occurred.

- +

Variable: char * rl_executing_macro
This variable is set to the text of any currently-executing macro.

- +

Variable: int rl_executing_key
The key that caused the dispatch to the currently-executing Readline function.

- +

Variable: char * rl_executing_keyseq
The full key sequence that caused the dispatch to the currently-executing @@ -2894,14 +3092,14 @@ Readline function.

- +

Variable: int rl_key_sequence_length
The number of characters in rl_executing_keyseq.

- +

Variable: int rl_readline_state
A variable with bit values that encapsulate the current Readline state. @@ -2971,7 +3169,7 @@ and is about to return the line to the caller.

- +

Variable: int rl_explicit_arg
Set to a non-zero value if an explicit numeric argument was specified by @@ -2979,7 +3177,7 @@ the user. Only valid in a bindable command function.

- +

Variable: int rl_numeric_arg
Set to the value of any numeric argument explicitly specified by the user @@ -2988,7 +3186,7 @@ command function.

- +

Variable: int rl_editing_mode
Set to a value denoting Readline's current editing mode. A value of @@ -3067,7 +3265,7 @@ programmer, should bind the functions you write to des well. Readline provides a function for doing that:

- +

Function: int rl_add_defun (const char *name, rl_command_func_t *function, int key)
Add name to the list of named functions. Make function be @@ -3107,7 +3305,7 @@ get run. You can make your own keymaps, copy existing Readline which keymap to use.

- +

Function: Keymap rl_make_bare_keymap (void)
Returns a new, empty keymap. The space for the keymap is allocated with @@ -3116,14 +3314,14 @@ Readline which keymap to use.

- +

Function: Keymap rl_copy_keymap (Keymap map)
Return a new keymap which is a copy of map.

- +

Function: Keymap rl_make_keymap (void)
Return a new keymap with the printing characters bound to rl_insert, @@ -3132,7 +3330,7 @@ the Meta digits bound to produce numeric arguments.

- +

Function: void rl_discard_keymap (Keymap keymap)
Free the storage associated with the data in keymap. @@ -3140,7 +3338,7 @@ The caller should free keymap.

- +

Function: void rl_free_keymap (Keymap keymap)
Free all storage associated with keymap. This calls @@ -3148,25 +3346,33 @@ The caller should free keymap.

+ +

+
Function: int rl_empty_keymap (Keymap keymap) +
Return non-zero if there are no keys bound to functions in keymap; +zero if there are any keys bound. +
+

+ Readline has several internal keymaps. These functions allow you to change which keymap is active.

- +

Function: Keymap rl_get_keymap (void)
Returns the currently active keymap.

- +

Function: void rl_set_keymap (Keymap keymap)
Makes keymap the currently active keymap.

- +

Function: Keymap rl_get_keymap_by_name (const char *name)
Return the keymap matching name. name is one which would @@ -3174,7 +3380,7 @@ be supplied in a set keymap inputrc line

- +

Function: char * rl_get_keymap_name (Keymap keymap)
Return the name matching keymap. name is one which would @@ -3182,6 +3388,27 @@ be supplied in a set keymap inputrc line

+ +

+
Function: int rl_set_keymap_name (const char *name, Keymap keymap) +
Set the name of keymap. This name will then be "registered" and +available for use in a set keymap inputrc directive +see section 1.3 Readline Init File). +The name may not be one of Readline's builtin keymap names; +you may not add a different name for one of Readline's builtin keymaps. +You may replace the name associated with a given keymap by calling this +function more than once with the same keymap argument. +You may associate a registered name with a new keymap by calling this +function more than once with the same name argument. +There is no way to remove a named keymap once the name has been +registered. +Readline will make a copy of name. +The return value is greater than zero unless name is one of +Readline's builtin keymap names or keymap is one of Readline's +builtin keymaps. +
+

+


@@ -3219,7 +3446,7 @@ initialization function assigned to the rl_start These functions manage key bindings.

- +

Function: int rl_bind_key (int key, rl_command_func_t *function)
Binds key to function in the currently active keymap. @@ -3227,7 +3454,7 @@ Returns non-zero in the case of an invalid key

- +

Function: int rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map)
Bind key to function in map. @@ -3235,7 +3462,7 @@ Returns non-zero in the case of an invalid key

- +

Function: int rl_bind_key_if_unbound (int key, rl_command_func_t *function)
Binds key to function if it is not already bound in the @@ -3245,7 +3472,7 @@ already bound.

- +

Function: int rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *function, Keymap map)
Binds key to function if it is not already bound in map. @@ -3254,7 +3481,7 @@ already bound.

- +

Function: int rl_unbind_key (int key)
Bind key to the null function in the currently active keymap. @@ -3262,7 +3489,7 @@ Returns non-zero in case of error.

- +

Function: int rl_unbind_key_in_map (int key, Keymap map)
Bind key to the null function in map. @@ -3270,21 +3497,21 @@ Returns non-zero in case of error.

- +

Function: int rl_unbind_function_in_map (rl_command_func_t *function, Keymap map)
Unbind all keys that execute function in map.

- +

Function: int rl_unbind_command_in_map (const char *command, Keymap map)
Unbind all keys that are bound to command in map.

- +

Function: int rl_bind_keyseq (const char *keyseq, rl_command_func_t *function)
Bind the key sequence represented by the string keyseq to the function @@ -3294,7 +3521,7 @@ The return value is non-zero if keyseq is i

- +

Function: int rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map)
Bind the key sequence represented by the string keyseq to the function @@ -3304,14 +3531,14 @@ The return value is non-zero if keyseq is i

- +

Function: int rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map)
Equivalent to rl_bind_keyseq_in_map.

- +

Function: int rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *function)
Binds keyseq to function if it is not already bound in the @@ -3321,7 +3548,7 @@ already bound.

- +

Function: int rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *function, Keymap map)
Binds keyseq to function if it is not already bound in map. @@ -3330,7 +3557,7 @@ already bound.

- +

Function: int rl_generic_bind (int type, const char *keyseq, char *data, Keymap map)
Bind the key sequence represented by the string keyseq to the arbitrary @@ -3341,7 +3568,7 @@ necessary. The initial keymap in which to do bindings

- +

Function: int rl_parse_and_bind (char *line)
Parse line as if it had been read from the inputrc file and @@ -3350,7 +3577,7 @@ perform any key bindings and variable assignments foun

- +

Function: int rl_read_init_file (const char *filename)
Read keybindings and variable assignments from filename @@ -3381,32 +3608,45 @@ and the functions invoked by a particular key sequence associate a new function name with an arbitrary function.

- +

Function: rl_command_func_t * rl_named_function (const char *name)
Return the function with name name.

- +

Function: rl_command_func_t * rl_function_of_keyseq (const char *keyseq, Keymap map, int *type)
Return the function invoked by keyseq in keymap map. If map is NULL, the current keymap is used. If type is not NULL, the type of the object is returned in the int variable it points to (one of ISFUNC, ISKMAP, or ISMACR). +It takes a "translated" key sequence and should not be used if the key sequence +can include NUL.

- +

+
Function: rl_command_func_t * rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type) +
Return the function invoked by keyseq of length len +in keymap map. Equivalent to rl_function_of_keyseq with the +addition of the len parameter. +It takes a "translated" key sequence and should be used if the key sequence +can include NUL. +
+

+ + +

Function: char ** rl_invoking_keyseqs (rl_command_func_t *function)
Return an array of strings representing the key sequences used to invoke function in the current keymap.

- +

Function: char ** rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map)
Return an array of strings representing the key sequences used to @@ -3414,7 +3654,7 @@ invoke function in the keymap map

- +

Function: void rl_function_dumper (int readable)
Print the readline function names and the key sequences currently @@ -3424,14 +3664,14 @@ the list is formatted in such a way that it can be mad

- +

Function: void rl_list_funmap_names (void)
Print the names of all bindable Readline functions to rl_outstream.

- +

Function: const char ** rl_funmap_names (void)
Return a NULL terminated array of known function names. The array is @@ -3441,7 +3681,7 @@ should free the array, but not the pointers, using

- +

Function: int rl_add_funmap_entry (const char *name, rl_command_func_t *function)
Add name to the list of bindable Readline command names, and make @@ -3496,7 +3736,7 @@ tells what to undo, not how to undo it. UNDO_BE rl_end_undo_group().

- +

Function: int rl_begin_undo_group (void)
Begins saving undo information in a group construct. The undo @@ -3506,7 +3746,7 @@ information usually comes from calls to rl_inser

- +

Function: int rl_end_undo_group (void)
Closes the current undo group started with rl_begin_undo_group @@ -3515,7 +3755,7 @@ for each call to rl_begin_undo_group().

- +

Function: void rl_add_undo (enum undo_code what, int start, int end, char *text)
Remember how to undo an event (according to what). The affected @@ -3523,14 +3763,14 @@ text runs from start to end, and

- +

Function: void rl_free_undo_list (void)
Free the existing undo list.

- +

Function: int rl_do_undo (void)
Undo the first thing on the undo list. Returns 0 if there was @@ -3544,7 +3784,7 @@ once, just before you modify the text. You must suppl the text range that you are going to modify.

- +

Function: int rl_modifying (int start, int end)
Tell Readline to save the text between start and end as a @@ -3571,7 +3811,7 @@ that text.

- +

Function: void rl_redisplay (void)
Change what's displayed on the screen to reflect the current contents @@ -3579,7 +3819,7 @@ of rl_line_buffer.

- +

Function: int rl_forced_update_display (void)
Force the line to be updated and redisplayed, whether or not @@ -3587,7 +3827,7 @@ Readline thinks the screen display is correct.

- +

Function: int rl_on_new_line (void)
Tell the update functions that we have moved onto a new (empty) line, @@ -3595,7 +3835,7 @@ usually after outputting a newline.

- +

Function: int rl_on_new_line_with_prompt (void)
Tell the update functions that we have moved onto a new line, with @@ -3607,22 +3847,29 @@ It should be used after setting rl_already_prompt

- +

+
Function: int rl_clear_visible_line (void) +
Clear the screen lines corresponding to the current line's contents. +
+

+ + +

Function: int rl_reset_line_state (void)
Reset the display state to a clean state and redisplay the current line starting on a new line.

- +

Function: int rl_crlf (void)
Move the cursor to the start of the next screen line.

- +

Function: int rl_show_char (int c)
Display character c on rl_outstream. @@ -3633,7 +3880,7 @@ redisplay.

- +

Function: int rl_message (const char *, ...)
The arguments are a format string as would be supplied to printf, @@ -3646,7 +3893,7 @@ before calling this function.

- +

Function: int rl_clear_message (void)
Clear the message in the echo area. If the prompt was saved with a call to @@ -3655,7 +3902,7 @@ call rl_restore_prompt before calling thi

- +

Function: void rl_save_prompt (void)
Save the local Readline prompt display state in preparation for @@ -3663,7 +3910,7 @@ displaying a new message in the message area with

- +

Function: void rl_restore_prompt (void)
Restore the local Readline prompt display state saved by the most @@ -3674,7 +3921,7 @@ corresponding call to rl_clear_message.

- +

Function: int rl_expand_prompt (char *prompt)
Expand any special character sequences in prompt and set up the @@ -3687,12 +3934,12 @@ It returns the number of visible characters on the las Applications may indicate that the prompt contains characters that take up no physical screen space when displayed by bracketing a sequence of such characters with the special markers RL_PROMPT_START_IGNORE -and RL_PROMPT_END_IGNORE (declared in `readline.h'. This may +and RL_PROMPT_END_IGNORE (declared in `readline.h'). This may be used to embed terminal-specific escape sequences in prompts.

- +

Function: int rl_set_prompt (const char *prompt)
Make Readline use prompt for subsequent redisplay. This calls @@ -3719,7 +3966,7 @@ to the result.

- +

Function: int rl_insert_text (const char *text)
Insert text into the line at the current cursor position. @@ -3727,7 +3974,7 @@ Returns the number of characters inserted.

- +

Function: int rl_delete_text (int start, int end)
Delete the text between start and end in the current line. @@ -3735,7 +3982,7 @@ Returns the number of characters deleted.

- +

Function: char * rl_copy_text (int start, int end)
Return a copy of the text between start and end in @@ -3743,7 +3990,7 @@ the current line.

- +

Function: int rl_kill_text (int start, int end)
Copy the text between start and end in the current line @@ -3755,7 +4002,7 @@ not a kill, a new kill ring slot is used.

- +

Function: int rl_push_macro_input (char *macro)
Cause macro to be inserted into the line, as if it had been invoked @@ -3782,7 +4029,7 @@ by a key bound to a macro. Not especially useful; use

- +

Function: int rl_read_key (void)
Return the next character available from Readline's current input stream. @@ -3794,7 +4041,7 @@ the rl_event_hook variable.

- +

Function: int rl_getc (FILE *stream)
Return the next character available from stream, which is assumed to @@ -3802,7 +4049,7 @@ be the keyboard.

- +

Function: int rl_stuff_char (int c)
Insert c into the Readline input stream. It will be "read" @@ -3813,7 +4060,7 @@ before Readline attempts to read characters from the t

- +

Function: int rl_execute_next (int c)
Make c be the next command to be executed when rl_read_key() @@ -3821,7 +4068,7 @@ is called. This sets rl_pending_input.

- +

Function: int rl_clear_pending_input (void)
Unset rl_pending_input, effectively negating the effect of any @@ -3830,7 +4077,7 @@ pending input has not already been read with rl_

- +

Function: int rl_set_keyboard_input_timeout (int u)
While waiting for keyboard input in rl_read_key(), Readline will @@ -3860,7 +4107,7 @@ Returns the old timeout value.

- +

Function: void rl_prep_terminal (int meta_flag)
Modify the terminal settings for Readline's use, so readline() @@ -3870,7 +4117,7 @@ read eight-bit input.

- +

Function: void rl_deprep_terminal (void)
Undo the effects of rl_prep_terminal(), leaving the terminal in @@ -3879,7 +4126,7 @@ the state in which it was before the most recent call

- +

Function: void rl_tty_set_default_bindings (Keymap kmap)
Read the operating system's terminal editing characters (as would be @@ -3888,7 +4135,7 @@ The bindings are performed in kmap.

- +

Function: void rl_tty_unset_default_bindings (Keymap kmap)
Reset the bindings manipulated by rl_tty_set_default_bindings so @@ -3897,8 +4144,19 @@ The bindings are performed in kmap.

- +

+
Function: int rl_tty_set_echoing (int value) +
Set Readline's idea of whether or not it is echoing output to its output +stream (rl_outstream). If value is 0, Readline does not display +output to rl_outstream; any other value enables output. The initial +value is set when Readline initializes the terminal settings. +This function returns the previous value. +
+

+ + +

Function: int rl_reset_terminal (const char *terminal_name)
Reinitialize Readline's idea of the terminal settings using terminal_name as the terminal type (e.g., vt100). @@ -3925,7 +4183,7 @@ environment variable is used.

- +

Function: int rl_save_state (struct readline_state *sp)
Save a snapshot of Readline's internal state to sp. @@ -3935,7 +4193,7 @@ The caller is responsible for allocating the structure

- +

Function: int rl_restore_state (struct readline_state *sp)
Restore Readline's internal state to that stored in sp, which must @@ -3946,7 +4204,7 @@ The caller is responsible for freeing the structure.

- +

Function: void rl_free (void *mem)
Deallocate the memory pointed to by mem. mem must have been @@ -3954,7 +4212,7 @@ allocated by malloc.

- +

Function: void rl_replace_line (const char *text, int clear_undo)
Replace the contents of rl_line_buffer with text. @@ -3964,7 +4222,7 @@ current line is cleared.

- +

Function: void rl_extend_line_buffer (int len)
Ensure that rl_line_buffer has enough space to hold len @@ -3972,7 +4230,7 @@ characters, possibly reallocating it if necessary.

- +

Function: int rl_initialize (void)
Initialize or re-initialize Readline's internal state. @@ -3981,21 +4239,21 @@ reading any input.

- +

Function: int rl_ding (void)
Ring the terminal bell, obeying the setting of bell-style.

- +

Function: int rl_alphabetic (int c)
Return 1 if c is an alphabetic character.

- +

Function: void rl_display_match_list (char **matches, int len, int max)
A convenience function for displaying a list of strings in @@ -4015,28 +4273,28 @@ The following are implemented as macros, defined in

- +

Function: int _rl_uppercase_p (int c)
Return 1 if c is an uppercase alphabetic character.

- +

Function: int _rl_lowercase_p (int c)
Return 1 if c is a lowercase alphabetic character.

- +

Function: int _rl_digit_p (int c)
Return 1 if c is a numeric character.

- +

Function: int _rl_to_upper (int c)
If c is a lowercase alphabetic character, return the corresponding @@ -4044,7 +4302,7 @@ uppercase character.

- +

Function: int _rl_to_lower (int c)
If c is an uppercase alphabetic character, return the corresponding @@ -4052,7 +4310,7 @@ lowercase character.

- +

Function: int _rl_digit_value (int c)
If c is a number, return the value it represents. @@ -4077,7 +4335,7 @@ lowercase character.

- +

Function: int rl_macro_bind (const char *keyseq, const char *macro, Keymap map)
Bind the key sequence keyseq to invoke the macro macro. @@ -4087,7 +4345,7 @@ use rl_generic_bind() instead.

- +

Function: void rl_macro_dumper (int readable)
Print the key sequences bound to macros and their values, using @@ -4097,7 +4355,7 @@ that it can be made part of an inputrc fi

- +

Function: int rl_variable_bind (const char *variable, const char *value)
Make the Readline variable variable have value. @@ -4107,7 +4365,7 @@ file (see section 1.3.1

- +

Function: char * rl_variable_value (const char *variable)
Return a string representing the value of the Readline variable variable. @@ -4115,7 +4373,7 @@ For boolean variables, this string is either `on

- +

Function: void rl_variable_dumper (int readable)
Print the readline variable names and their current values @@ -4125,7 +4383,7 @@ that it can be made part of an inputrc fi

- +

Function: int rl_set_paren_blink_timeout (int u)
Set the time interval (in microseconds) that Readline waits when showing @@ -4133,7 +4391,7 @@ a balancing character when blink-matching-paren<

- +

Function: char * rl_get_termcap (const char *cap)
Retrieve the string value of the termcap capability cap. @@ -4145,7 +4403,7 @@ values for only those capabilities Readline uses.

- +

Function: void rl_clear_history (void)
Clear the history list by deleting all of the entries, in the same manner @@ -4155,6 +4413,41 @@ Readline saves in the history list.

+ +

+
Function: void rl_activate_mark (void) +
Enable an active mark. +When this is enabled, the text between point and mark (the region) is +displayed in the terminal's standout mode (a face). +This is called by various readline functions that set the mark and insert +text, and is available for applications to call. +
+

+ + +

+
Function: void rl_deactivate_mark (void) +
Turn off the active mark. +
+

+ + +

+
Function: void rl_keep_mark_active (void) +
Indicate that the mark should remain active when the current readline function +completes and after redisplay occurs. +In most cases, the mark remains active for only the duration of a single +bindable readline function. +
+

+ + +

+
Function: int rl_mark_active_p (void) +
Return a non-zero value if the mark is currently active; zero otherwise. +
+

+


@@ -4181,7 +4474,7 @@ also be invoked as a `callback' function from an event are functions available to make this easy.

- +

Function: void rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *lhandler)
Set up the terminal for readline I/O and display the initial @@ -4189,10 +4482,12 @@ expanded value of prompt. Save the value o use as a handler function to call when a complete line of input has been entered. The handler function receives the text of the line as an argument. +As with readline(), the handler function should free the +line when it it finished with it.

- +

Function: void rl_callback_read_char (void)
Whenever an application determines that keyboard input is available, it @@ -4212,11 +4507,22 @@ the terminal settings are modified for Readline's use

- +

+
Function: void rl_callback_sigcleanup (void) +
Clean up any internal state the callback interface uses to maintain state +between calls to rl_callback_read_char (e.g., the state of any active +incremental searches). This is intended to be used by applications that +wish to perform their own signal handling; Readline's internal signal handler +calls this when appropriate. +
+

+ + +

Function: void rl_callback_handler_remove (void)
Restore the terminal to its initial state and remove the line handler. -This may be called from within a callback as well as independently. +You may call this function from within a callback as well as independently. If the lhandler installed by rl_callback_handler_install does not exit the program, either this function or the function referred to by the value of rl_deprep_term_function should be called before @@ -4332,12 +4638,16 @@ It understands the EOF character or "exit" to exit the - + @@ -6530,433 +6932,465 @@ to permit their use in free software. - - - - - - + + + + + + - - - - + + + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + - - - - - - - - + + + + + + + + - - - - - - - - - - - + + + + + + + + + + + - - - - - - + + + + + + - - - - - - - - - + + + + + + + + + - - - - - - - - - + + + + + + + + + - - - - - - + + + + + + + + - - - + + + + + - - - - - - - - - + + + + + + + + + + + - - + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - + + + + + + + + + + + + + + - - - - - - - - + + + + + + + + - - - - - - - - - - - - + + + + + + + + + + + + - - - + + + + + - - - - - - - - + + + + + + + +
 
/* Standard include files. stdio.h is required. */
 #include <stdlib.h>
+#include <string.h>
 #include <unistd.h>
+#include <locale.h>
 
 /* Used for select(2) */
 #include <sys/types.h>
 #include <sys/select.h>
 
+#include <signal.h>
+
 #include <stdio.h>
 
 /* Standard readline include files. */
@@ -4345,10 +4655,20 @@ It understands the EOF character or "exit" to exit the
 #include <readline/history.h>
 
 static void cb_linehandler (char *);
+static void sighandler (int);
 
 int running;
+int sigwinch_received;
 const char *prompt = "rltest$ ";
 
+/* Handle SIGWINCH and window size changes when readline is not active and
+   reading a character. */
+static void
+sighandler (int sig)
+{
+  sigwinch_received = 1;
+}
+
 /* Callback function called for each line when accept-line executed, EOF
    seen, or EOF character read.  This sets a flag and returns; it could
    also call exit(3). */
@@ -4383,6 +4703,13 @@ main (int c, char **v)
   fd_set fds;
   int r;
 
+  /* Set the default locale values according to environment variables. */
+  setlocale (LC_ALL, "");
+
+  /* Handle window size changes when readline is not active and reading
+     characters. */
+  signal (SIGWINCH, sighandler);
+
   /* Install the line handler. */
   rl_callback_handler_install (prompt, cb_linehandler);
 
@@ -4397,12 +4724,19 @@ main (int c, char **v)
       FD_SET (fileno (rl_instream), &fds);    
 
       r = select (FD_SETSIZE, &fds, NULL, NULL, NULL);
-      if (r < 0)
+      if (r < 0 && errno != EINTR)
         {
           perror ("rltest: select");
           rl_callback_handler_remove ();
           break;
         }
+      if (sigwinch_received)
+	{
+	  rl_resize_terminal ();
+	  sigwinch_received = 0;
+	}
+      if (r < 0)
+	continue;     
 
       if (FD_ISSET (fileno (rl_instream), &fds))
         rl_callback_read_char ();
@@ -4468,9 +4802,34 @@ resetting the terminal to its original state.  If the 
 handler does more than update its idea of the terminal size and return (for
 example, a longjmp back to a main processing loop), it must
 call rl_cleanup_after_signal() (described below), to restore the
-terminal state. 
+terminal state.
 

+When an application is using the callback interface +(see section 2.4.12 Alternate Interface), Readline installs signal handlers only for +the duration of the call to rl_callback_read_char. Applications +using the callback interface should be prepared to clean up Readline's +state if they wish to handle the signal before the line handler completes +and restores the terminal state. +

+ +If an application using the callback interface wishes to have Readline +install its signal handlers at the time the application calls +rl_callback_handler_install and remove them only when a complete +line of input has been read, it should set the +rl_persistent_signal_handlers variable to a non-zero value. +This allows an application to defer all of the handling of the signals +Readline catches to Readline. +Applications should use this variable with care; it can result in Readline +catching signals and not acting on them (or allowing the application to react +to them) until the application calls rl_callback_read_char. This +can result in an application becoming less responsive to keyboard signals +like SIGINT. +If an application does not want or need to perform any signal handling, or +does not need to do any processing between calls to rl_callback_read_char, +setting this variable may be desirable. +

+ Readline provides two variables that allow application writers to control whether or not it will catch certain signals and act on them when they are received. It is important that applications change the @@ -4478,7 +4837,7 @@ values of these variables only when calling read a signal handler, so Readline's internal signal state is not corrupted.

- +

Variable: int rl_catch_signals
If this variable is non-zero, Readline will install signal handlers for @@ -4490,7 +4849,7 @@ The default value of rl_catch_signals is

- +

Variable: int rl_catch_sigwinch
If this variable is set to a non-zero value, @@ -4501,8 +4860,21 @@ The default value of rl_catch_sigwinch is

- +

+
Variable: int rl_persistent_signal_handlers +
If an application using the callback interface wishes Readline's signal +handlers to be installed and active during the set of calls to +rl_callback_read_char that constitutes an entire single line, +it should set this variable to a non-zero value. +

+ +The default value of rl_persistent_signal_handlers is 0. +

+

+ + +

Variable: int rl_change_environment
If this variable is set to a non-zero value, and Readline is handling SIGWINCH, Readline will modify the @@ -4521,8 +4893,16 @@ Readline provides convenience functions to do the nece and internal state cleanup upon receipt of a signal.

- +

+
Function: int rl_pending_signal (void) +
Return the signal number of the most recent signal Readline received but +has not yet handled, or 0 if there is no pending signal. +
+

+ + +

Function: void rl_cleanup_after_signal (void)
This function will reset the state of the terminal to what it was before readline() was called, and remove the Readline signal handlers for @@ -4531,7 +4911,7 @@ all signals, depending on the values of rl_catch

- +

Function: void rl_free_line_state (void)
This will free any partial state associated with the current input line @@ -4543,7 +4923,7 @@ current input line.

- +

Function: void rl_reset_after_signal (void)
This will reinitialize the terminal and reinstall any Readline signal @@ -4552,13 +4932,30 @@ handlers, depending on the values of rl_catch_si

+If an application wants to force Readline to handle any signals that +have arrived while it has been executing, rl_check_signals() +will call Readline's internal signal handler if there are any pending +signals. This is primarily intended for those applications that use +a custom rl_getc_function (see section 2.3 Readline Variables) and wish +to handle signals received while waiting for input. +

+ + +

+
Function: void rl_check_signals (void) +
If there are any pending signals, call Readline's internal signal handling +functions to process them. rl_pending_signal() can be used independently +to determine whether or not there are any pending signals. +
+

+ If an application does not wish Readline to catch SIGWINCH, it may call rl_resize_terminal() or rl_set_screen_size() to force -Readline to update its idea of the terminal size when a SIGWINCH -is received. +Readline to update its idea of the terminal size when it receives +a SIGWINCH.

- +

Function: void rl_echo_signal_char (int sig)
If an application wishes to install its own signal handlers, but still @@ -4568,28 +4965,31 @@ function with sig set to SIGINT

- +

Function: void rl_resize_terminal (void)
Update Readline's internal screen size by reading values from the kernel.

- +

Function: void rl_set_screen_size (int rows, int cols)
Set Readline's idea of the terminal size to rows rows and cols columns. If either rows or columns is less than or equal to 0, Readline's idea of that terminal dimension is unchanged. +This is intended to tell Readline the physical dimensions of the terminal, +and is used internally to calculate the maximum number of characters that +may appear on a single line and on the screen.

If an application does not want to install a SIGWINCH handler, but -is still interested in the screen dimensions, Readline's idea of the screen -size may be queried. +is still interested in the screen dimensions, it may query Readline's idea +of the screen size.

- +

Function: void rl_get_screen_size (int *rows, int *cols)
Return Readline's idea of the terminal's size in the @@ -4597,7 +4997,7 @@ variables pointed to by the arguments.

- +

Function: void rl_reset_screen_size (void)
Cause Readline to reobtain the screen size and recalculate its dimensions. @@ -4607,7 +5007,7 @@ variables pointed to by the arguments. The following functions install and remove Readline's signal handlers.

- +

Function: int rl_set_signals (void)
Install Readline's signal handler for SIGINT, SIGQUIT, @@ -4617,7 +5017,7 @@ The following functions install and remove Readline's

- +

Function: int rl_clear_signals (void)
Remove all of the Readline signal handlers installed by @@ -4730,7 +5130,7 @@ Such a generator function is referred to as an

- +

Function: int rl_complete (int ignore, int invoking_key)
Complete the word at or before point. You have supplied the function @@ -4739,7 +5139,7 @@ that does the initial simple matching selection algori

- +

Variable: rl_compentry_func_t * rl_completion_entry_function
This is a pointer to the generator function for @@ -4775,7 +5175,7 @@ Here is the complete list of callable completion funct Readline.

- +

Function: int rl_complete_internal (int what_to_do)
Complete the word at or before point. what_to_do says what to do @@ -4789,7 +5189,7 @@ a common prefix.

- +

Function: int rl_complete (int ignore, int invoking_key)
Complete the word at or before point. You have supplied the function @@ -4801,7 +5201,7 @@ argument depending on invoking_key.

- +

Function: int rl_possible_completions (int count, int invoking_key)
List the possible completions. See description of rl_complete @@ -4810,7 +5210,7 @@ argument depending on invoking_key.

- +

Function: int rl_insert_completions (int count, int invoking_key)
Insert the list of possible completions into the line, deleting the @@ -4819,7 +5219,7 @@ This calls rl_complete_internal() with an

- +

Function: int rl_completion_mode (rl_command_func_t *cfunc)
Returns the appropriate value to pass to rl_complete_internal() @@ -4831,7 +5231,7 @@ the same interface as rl_complete().

- +

Function: char ** rl_completion_matches (const char *text, rl_compentry_func_t *entry_func)
Returns an array of strings which is a list of completions for @@ -4849,7 +5249,7 @@ when there are no more matches.

- +

Function: char * rl_filename_completion_function (const char *text, int state)
A generator function for filename completion in the general case. @@ -4860,7 +5260,7 @@ Readline functions).

- +

Function: char * rl_username_completion_function (const char *text, int state)
A completion generator for usernames. text contains a partial @@ -4888,7 +5288,7 @@ for subsequent calls.

- +

Variable: rl_compentry_func_t * rl_completion_entry_function
A pointer to the generator function for rl_completion_matches(). @@ -4897,7 +5297,7 @@ the default filename completer.

- +

Variable: rl_completion_func_t * rl_attempted_completion_function
A pointer to an alternative function to create matches. @@ -4914,7 +5314,7 @@ completion even if this function returns no matches.

- +

Variable: rl_quote_func_t * rl_filename_quoting_function
A pointer to a function that will quote a filename in an @@ -4931,7 +5331,7 @@ to reset this character.

- +

Variable: rl_dequote_func_t * rl_filename_dequoting_function
A pointer to a function that will remove application-specific quoting @@ -4944,7 +5344,7 @@ that delimits the filename (usually `'' o

- +

Variable: rl_linebuf_func_t * rl_char_is_quoted_p
A pointer to a function to call that determines whether or not a specific @@ -4957,7 +5357,7 @@ used to break words for the completer.

- +

Variable: rl_compignore_func_t * rl_ignore_some_completions_function
This function, if defined, is called by the completer when real filename @@ -4970,7 +5370,7 @@ from the array must be freed.

- +

Variable: rl_icppfunc_t * rl_directory_completion_hook
This function, if defined, is allowed to modify the directory portion @@ -4993,7 +5393,7 @@ The function should not modify the directory argument

- +

Variable: rl_icppfunc_t * rl_directory_rewrite_hook;
If non-zero, this is the address of a function to call when completing @@ -5008,12 +5408,12 @@ be passed directly to opendir().

The directory rewrite hook returns an integer that should be non-zero if -the function modfies its directory argument. +the function modifies its directory argument. The function should not modify the directory argument if it returns 0.

- +

Variable: rl_icppfunc_t * rl_filename_stat_hook
If non-zero, this is the address of a function for the completer to @@ -5024,12 +5424,12 @@ This function does not need to remove quote characters

The stat hook returns an integer that should be non-zero if -the function modfies its directory argument. +the function modifies its directory argument. The function should not modify the directory argument if it returns 0.

- +

Variable: rl_dequote_func_t * rl_filename_rewrite_hook
If non-zero, this is the address of a function called when reading @@ -5048,7 +5448,7 @@ allocated string.

- +

Variable: rl_compdisp_func_t * rl_completion_display_matches_hook
If non-zero, then this is the address of a function to call when @@ -5060,12 +5460,12 @@ where matches is the array of matching stri num_matches is the number of strings in that array, and max_length is the length of the longest string in that array. Readline provides a convenience function, rl_display_match_list, -that takes care of doing the display to Readline's output stream. That -function may be called from this hook. +that takes care of doing the display to Readline's output stream. +You may call that function from this hook.

- +

Variable: const char * rl_basic_word_break_characters
The basic list of characters that signal a break between words for the @@ -5075,14 +5475,14 @@ which break words for completion in Bash:

- +

Variable: const char * rl_basic_quote_characters
A list of quote characters which can cause a word break.

- +

Variable: const char * rl_completer_word_break_characters
The list of characters that signal a break between words for @@ -5091,7 +5491,7 @@ which break words for completion in Bash:

- +

Variable: rl_cpvfunc_t * rl_completion_word_break_hook
If non-zero, this is the address of a function to call when Readline is @@ -5103,7 +5503,7 @@ returns NULL, rl_completer_word_bre

- +

Variable: const char * rl_completer_quote_characters
A list of characters which can be used to quote a substring of the line. @@ -5113,7 +5513,7 @@ unless they also appear within this list.

- +

Variable: const char * rl_filename_quote_characters
A list of characters that cause a filename to be quoted by the completer @@ -5121,7 +5521,7 @@ when they appear in a completed filename. The default

- +

Variable: const char * rl_special_prefixes
The list of characters that are word break characters, but should be @@ -5132,7 +5532,7 @@ shell variables and hostnames.

- +

Variable: int rl_completion_query_items
Up to this many items will be displayed in response to a @@ -5142,7 +5542,7 @@ indicates that Readline should never ask the user.

- +

Variable: int rl_completion_append_character
When a single completion alternative matches at the end of the command @@ -5152,10 +5552,12 @@ character (`\0') prevents anything being This can be changed in application-specific completion functions to provide the "most sensible word separator character" according to an application-specific command line syntax specification. +It is set to the default before any application-specific completion function +is called, and may only be changed within such a function.

- +

Variable: int rl_completion_suppress_append
If non-zero, rl_completion_append_character is not appended to @@ -5165,7 +5567,7 @@ is called, and may only be changed within such a funct

- +

Variable: int rl_completion_quote_character
When Readline is completing quoted text, as delimited by one of the @@ -5175,7 +5577,7 @@ This is set before any application-specific completion

- +

Variable: int rl_completion_suppress_quote
If non-zero, Readline does not append a matching quote character when @@ -5185,7 +5587,7 @@ is called, and may only be changed within such a funct

- +

Variable: int rl_completion_found_quote
When Readline is completing quoted text, it sets this variable @@ -5195,7 +5597,7 @@ This is set before any application-specific completion

- +

Variable: int rl_completion_mark_symlink_dirs
If non-zero, a slash will be appended to completed filenames that are @@ -5210,7 +5612,7 @@ function modifies the value, the user's preferences ar

- +

Variable: int rl_ignore_completion_duplicates
If non-zero, then duplicates in the matches are removed. @@ -5218,7 +5620,7 @@ The default is 1.

- +

Variable: int rl_filename_completion_desired
Non-zero means that the results of the matches are to be treated as @@ -5232,7 +5634,7 @@ characters in rl_filename_quote_characters

- +

Variable: int rl_filename_quoting_desired
Non-zero means that the results of the matches are to be quoted using @@ -5246,7 +5648,7 @@ by rl_filename_quoting_function.

- +

Variable: int rl_attempted_completion_over
If an application-specific completion function assigned to @@ -5257,7 +5659,7 @@ It should be set only by an application's completion f

- +

Variable: int rl_sort_completion_matches
If an application sets this variable to 0, Readline will not sort the @@ -5269,7 +5671,7 @@ matches.

- +

Variable: int rl_completion_type
Set to a character describing the type of completion Readline is currently @@ -5281,7 +5683,7 @@ the same interface as rl_complete().

- +

Variable: int rl_completion_invoking_key
Set to the final character in the key sequence that invoked one of the @@ -5291,7 +5693,7 @@ function is called.

- +

Variable: int rl_inhibit_completion
If this variable is non-zero, completion is inhibited. The completion @@ -5703,7 +6105,7 @@ com_help (arg) if (!printed) { - printf ("No commands match `%s'. Possibilties are:\n", arg); + printf ("No commands match `%s'. Possibilities are:\n", arg); for (i = 0; commands[i].name; i++) { @@ -6438,7 +6840,7 @@ to permit their use in free software.
notation, readline1.2.1 Readline Bare Essentials

R
readline, function2.1 Basic Behavior
readline, function2.1 Basic Behavior

V
variables, readline1.3.1 Readline Init File Syntax
Index Entry Section

_
_rl_digit_p2.4.10 Utility Functions
_rl_digit_value2.4.10 Utility Functions
_rl_lowercase_p2.4.10 Utility Functions
_rl_to_lower2.4.10 Utility Functions
_rl_to_upper2.4.10 Utility Functions
_rl_uppercase_p2.4.10 Utility Functions
_rl_digit_p2.4.10 Utility Functions
_rl_digit_value2.4.10 Utility Functions
_rl_lowercase_p2.4.10 Utility Functions
_rl_to_lower2.4.10 Utility Functions
_rl_to_upper2.4.10 Utility Functions
_rl_uppercase_p2.4.10 Utility Functions

A
abort (C-g)1.4.8 Some Miscellaneous Commands
abort (C-g)1.4.8 Some Miscellaneous Commands
accept-line (Newline or Return)1.4.2 Commands For Manipulating The History
accept-line (Newline or Return)1.4.2 Commands For Manipulating The History
abort (C-g)1.4.8 Some Miscellaneous Commands
abort (C-g)1.4.8 Some Miscellaneous Commands
accept-line (Newline or Return)1.4.2 Commands For Manipulating The History
accept-line (Newline or Return)1.4.2 Commands For Manipulating The History

B
backward-char (C-b)1.4.1 Commands For Moving
backward-char (C-b)1.4.1 Commands For Moving
backward-delete-char (Rubout)1.4.3 Commands For Changing Text
backward-delete-char (Rubout)1.4.3 Commands For Changing Text
backward-kill-line (C-x Rubout)1.4.4 Killing And Yanking
backward-kill-line (C-x Rubout)1.4.4 Killing And Yanking
backward-kill-word (M-DEL)1.4.4 Killing And Yanking
backward-kill-word (M-DEL)1.4.4 Killing And Yanking
backward-word (M-b)1.4.1 Commands For Moving
backward-word (M-b)1.4.1 Commands For Moving
beginning-of-history (M-&#60;)1.4.2 Commands For Manipulating The History
beginning-of-history (M-&#60;)1.4.2 Commands For Manipulating The History
beginning-of-line (C-a)1.4.1 Commands For Moving
beginning-of-line (C-a)1.4.1 Commands For Moving
backward-char (C-b)1.4.1 Commands For Moving
backward-char (C-b)1.4.1 Commands For Moving
backward-delete-char (Rubout)1.4.3 Commands For Changing Text
backward-delete-char (Rubout)1.4.3 Commands For Changing Text
backward-kill-line (C-x Rubout)1.4.4 Killing And Yanking
backward-kill-line (C-x Rubout)1.4.4 Killing And Yanking
backward-kill-word (M-DEL)1.4.4 Killing And Yanking
backward-kill-word (M-DEL)1.4.4 Killing And Yanking
backward-word (M-b)1.4.1 Commands For Moving
backward-word (M-b)1.4.1 Commands For Moving
beginning-of-history (M-&#60;)1.4.2 Commands For Manipulating The History
beginning-of-history (M-&#60;)1.4.2 Commands For Manipulating The History
beginning-of-line (C-a)1.4.1 Commands For Moving
beginning-of-line (C-a)1.4.1 Commands For Moving
bell-style1.3.1 Readline Init File Syntax
bind-tty-special-chars1.3.1 Readline Init File Syntax
blink-matching-paren1.3.1 Readline Init File Syntax
bracketed-paste-begin ()1.4.3 Commands For Changing Text
bracketed-paste-begin ()1.4.3 Commands For Changing Text

C
call-last-kbd-macro (C-x e)1.4.7 Keyboard Macros
call-last-kbd-macro (C-x e)1.4.7 Keyboard Macros
capitalize-word (M-c)1.4.3 Commands For Changing Text
capitalize-word (M-c)1.4.3 Commands For Changing Text
character-search (C-])1.4.8 Some Miscellaneous Commands
character-search (C-])1.4.8 Some Miscellaneous Commands
character-search-backward (M-C-])1.4.8 Some Miscellaneous Commands
character-search-backward (M-C-])1.4.8 Some Miscellaneous Commands
clear-screen (C-l)1.4.1 Commands For Moving
clear-screen (C-l)1.4.1 Commands For Moving
colored-stats1.3.1 Readline Init File Syntax
comment-begin1.3.1 Readline Init File Syntax
complete (TAB)1.4.6 Letting Readline Type For You
complete (TAB)1.4.6 Letting Readline Type For You
completion-display-width1.3.1 Readline Init File Syntax
completion-ignore-case1.3.1 Readline Init File Syntax
completion-map-case1.3.1 Readline Init File Syntax
completion-prefix-display-length1.3.1 Readline Init File Syntax
completion-query-items1.3.1 Readline Init File Syntax
convert-meta1.3.1 Readline Init File Syntax
copy-backward-word ()1.4.4 Killing And Yanking
copy-backward-word ()1.4.4 Killing And Yanking
copy-forward-word ()1.4.4 Killing And Yanking
copy-forward-word ()1.4.4 Killing And Yanking
copy-region-as-kill ()1.4.4 Killing And Yanking
copy-region-as-kill ()1.4.4 Killing And Yanking
call-last-kbd-macro (C-x e)1.4.7 Keyboard Macros
call-last-kbd-macro (C-x e)1.4.7 Keyboard Macros
capitalize-word (M-c)1.4.3 Commands For Changing Text
capitalize-word (M-c)1.4.3 Commands For Changing Text
character-search (C-])1.4.8 Some Miscellaneous Commands
character-search (C-])1.4.8 Some Miscellaneous Commands
character-search-backward (M-C-])1.4.8 Some Miscellaneous Commands
character-search-backward (M-C-])1.4.8 Some Miscellaneous Commands
clear-display (M-C-l)1.4.1 Commands For Moving
clear-display (M-C-l)1.4.1 Commands For Moving
clear-screen (C-l)1.4.1 Commands For Moving
clear-screen (C-l)1.4.1 Commands For Moving
colored-completion-prefix1.3.1 Readline Init File Syntax
colored-stats1.3.1 Readline Init File Syntax
comment-begin1.3.1 Readline Init File Syntax
complete (TAB)1.4.6 Letting Readline Type For You
complete (TAB)1.4.6 Letting Readline Type For You
completion-display-width1.3.1 Readline Init File Syntax
completion-ignore-case1.3.1 Readline Init File Syntax
completion-map-case1.3.1 Readline Init File Syntax
completion-prefix-display-length1.3.1 Readline Init File Syntax
completion-query-items1.3.1 Readline Init File Syntax
convert-meta1.3.1 Readline Init File Syntax
copy-backward-word ()1.4.4 Killing And Yanking
copy-backward-word ()1.4.4 Killing And Yanking
copy-forward-word ()1.4.4 Killing And Yanking
copy-forward-word ()1.4.4 Killing And Yanking
copy-region-as-kill ()1.4.4 Killing And Yanking
copy-region-as-kill ()1.4.4 Killing And Yanking

D
delete-char (C-d)1.4.3 Commands For Changing Text
delete-char (C-d)1.4.3 Commands For Changing Text
delete-char-or-list ()1.4.6 Letting Readline Type For You
delete-char-or-list ()1.4.6 Letting Readline Type For You
delete-horizontal-space ()1.4.4 Killing And Yanking
delete-horizontal-space ()1.4.4 Killing And Yanking
digit-argument (M-0, M-1, <small>...</small> M--)1.4.5 Specifying Numeric Arguments
digit-argument (M-0, M-1, <small>...</small> M--)1.4.5 Specifying Numeric Arguments
disable-completion1.3.1 Readline Init File Syntax
do-uppercase-version (M-a, M-b, M-x, <small>...</small>)1.4.8 Some Miscellaneous Commands
do-uppercase-version (M-a, M-b, M-x, <small>...</small>)1.4.8 Some Miscellaneous Commands
downcase-word (M-l)1.4.3 Commands For Changing Text
downcase-word (M-l)1.4.3 Commands For Changing Text
dump-functions ()1.4.8 Some Miscellaneous Commands
dump-functions ()1.4.8 Some Miscellaneous Commands
dump-macros ()1.4.8 Some Miscellaneous Commands
dump-macros ()1.4.8 Some Miscellaneous Commands
dump-variables ()1.4.8 Some Miscellaneous Commands
dump-variables ()1.4.8 Some Miscellaneous Commands
delete-char (C-d)1.4.3 Commands For Changing Text
delete-char (C-d)1.4.3 Commands For Changing Text
delete-char-or-list ()1.4.6 Letting Readline Type For You
delete-char-or-list ()1.4.6 Letting Readline Type For You
delete-horizontal-space ()1.4.4 Killing And Yanking
delete-horizontal-space ()1.4.4 Killing And Yanking
digit-argument (M-0, M-1, <small>...</small> M--)1.4.5 Specifying Numeric Arguments
digit-argument (M-0, M-1, <small>...</small> M--)1.4.5 Specifying Numeric Arguments
disable-completion1.3.1 Readline Init File Syntax
do-lowercase-version (M-A, M-B, M-x, <small>...</small>)1.4.8 Some Miscellaneous Commands
do-lowercase-version (M-A, M-B, M-x, <small>...</small>)1.4.8 Some Miscellaneous Commands
downcase-word (M-l)1.4.3 Commands For Changing Text
downcase-word (M-l)1.4.3 Commands For Changing Text
dump-functions ()1.4.8 Some Miscellaneous Commands
dump-functions ()1.4.8 Some Miscellaneous Commands
dump-macros ()1.4.8 Some Miscellaneous Commands
dump-macros ()1.4.8 Some Miscellaneous Commands
dump-variables ()1.4.8 Some Miscellaneous Commands
dump-variables ()1.4.8 Some Miscellaneous Commands

E
editing-mode1.3.1 Readline Init File Syntax
emacs-editing-mode (C-e)1.4.8 Some Miscellaneous Commands
emacs-editing-mode (C-e)1.4.8 Some Miscellaneous Commands
enable-keypad1.3.1 Readline Init File Syntax
end-kbd-macro (C-x ))1.4.7 Keyboard Macros
end-kbd-macro (C-x ))1.4.7 Keyboard Macros
end-of-file (usually C-d)1.4.3 Commands For Changing Text
end-of-file (usually C-d)1.4.3 Commands For Changing Text
end-of-history (M-&#62;)1.4.2 Commands For Manipulating The History
end-of-history (M-&#62;)1.4.2 Commands For Manipulating The History
end-of-line (C-e)1.4.1 Commands For Moving
end-of-line (C-e)1.4.1 Commands For Moving
exchange-point-and-mark (C-x C-x)1.4.8 Some Miscellaneous Commands
exchange-point-and-mark (C-x C-x)1.4.8 Some Miscellaneous Commands
expand-tilde1.3.1 Readline Init File Syntax
echo-control-characters1.3.1 Readline Init File Syntax
editing-mode1.3.1 Readline Init File Syntax
emacs-editing-mode (C-e)1.4.8 Some Miscellaneous Commands
emacs-editing-mode (C-e)1.4.8 Some Miscellaneous Commands
emacs-mode-string1.3.1 Readline Init File Syntax
enable-bracketed-paste1.3.1 Readline Init File Syntax
enable-keypad1.3.1 Readline Init File Syntax
end-kbd-macro (C-x ))1.4.7 Keyboard Macros
end-kbd-macro (C-x ))1.4.7 Keyboard Macros
end-of-file (usually C-d)1.4.3 Commands For Changing Text
end-of-file (usually C-d)1.4.3 Commands For Changing Text
end-of-history (M-&#62;)1.4.2 Commands For Manipulating The History
end-of-history (M-&#62;)1.4.2 Commands For Manipulating The History
end-of-line (C-e)1.4.1 Commands For Moving
end-of-line (C-e)1.4.1 Commands For Moving
exchange-point-and-mark (C-x C-x)1.4.8 Some Miscellaneous Commands
exchange-point-and-mark (C-x C-x)1.4.8 Some Miscellaneous Commands
expand-tilde1.3.1 Readline Init File Syntax

F
forward-backward-delete-char ()1.4.3 Commands For Changing Text
forward-backward-delete-char ()1.4.3 Commands For Changing Text
forward-char (C-f)1.4.1 Commands For Moving
forward-char (C-f)1.4.1 Commands For Moving
forward-search-history (C-s)1.4.2 Commands For Manipulating The History
forward-search-history (C-s)1.4.2 Commands For Manipulating The History
forward-word (M-f)1.4.1 Commands For Moving
forward-word (M-f)1.4.1 Commands For Moving
forward-backward-delete-char ()1.4.3 Commands For Changing Text
forward-backward-delete-char ()1.4.3 Commands For Changing Text
forward-char (C-f)1.4.1 Commands For Moving
forward-char (C-f)1.4.1 Commands For Moving
forward-search-history (C-s)1.4.2 Commands For Manipulating The History
forward-search-history (C-s)1.4.2 Commands For Manipulating The History
forward-word (M-f)1.4.1 Commands For Moving
forward-word (M-f)1.4.1 Commands For Moving

H
history-preserve-point1.3.1 Readline Init File Syntax
history-search-backward ()1.4.2 Commands For Manipulating The History
history-search-backward ()1.4.2 Commands For Manipulating The History
history-search-forward ()1.4.2 Commands For Manipulating The History
history-search-forward ()1.4.2 Commands For Manipulating The History
history-size1.3.1 Readline Init File Syntax
history-substr-search-backward ()1.4.2 Commands For Manipulating The History
history-substr-search-backward ()1.4.2 Commands For Manipulating The History
history-substr-search-forward ()1.4.2 Commands For Manipulating The History
history-substr-search-forward ()1.4.2 Commands For Manipulating The History
horizontal-scroll-mode1.3.1 Readline Init File Syntax
history-preserve-point1.3.1 Readline Init File Syntax
history-search-backward ()1.4.2 Commands For Manipulating The History
history-search-backward ()1.4.2 Commands For Manipulating The History
history-search-forward ()1.4.2 Commands For Manipulating The History
history-search-forward ()1.4.2 Commands For Manipulating The History
history-size1.3.1 Readline Init File Syntax
history-substring-search-backward ()1.4.2 Commands For Manipulating The History
history-substring-search-backward ()1.4.2 Commands For Manipulating The History
history-substring-search-forward ()1.4.2 Commands For Manipulating The History
history-substring-search-forward ()1.4.2 Commands For Manipulating The History
horizontal-scroll-mode1.3.1 Readline Init File Syntax

I
input-meta1.3.1 Readline Init File Syntax
insert-comment (M-#)1.4.8 Some Miscellaneous Commands
insert-comment (M-#)1.4.8 Some Miscellaneous Commands
insert-completions (M-*)1.4.6 Letting Readline Type For You
insert-completions (M-*)1.4.6 Letting Readline Type For You
isearch-terminators1.3.1 Readline Init File Syntax
input-meta1.3.1 Readline Init File Syntax
insert-comment (M-#)1.4.8 Some Miscellaneous Commands
insert-comment (M-#)1.4.8 Some Miscellaneous Commands
insert-completions (M-*)1.4.6 Letting Readline Type For You
insert-completions (M-*)1.4.6 Letting Readline Type For You
isearch-terminators1.3.1 Readline Init File Syntax

K
keymap1.3.1 Readline Init File Syntax
kill-line (C-k)1.4.4 Killing And Yanking
kill-line (C-k)1.4.4 Killing And Yanking
kill-region ()1.4.4 Killing And Yanking
kill-region ()1.4.4 Killing And Yanking
kill-whole-line ()1.4.4 Killing And Yanking
kill-whole-line ()1.4.4 Killing And Yanking
kill-word (M-d)1.4.4 Killing And Yanking
kill-word (M-d)1.4.4 Killing And Yanking
keymap1.3.1 Readline Init File Syntax
kill-line (C-k)1.4.4 Killing And Yanking
kill-line (C-k)1.4.4 Killing And Yanking
kill-region ()1.4.4 Killing And Yanking
kill-region ()1.4.4 Killing And Yanking
kill-whole-line ()1.4.4 Killing And Yanking
kill-whole-line ()1.4.4 Killing And Yanking
kill-word (M-d)1.4.4 Killing And Yanking
kill-word (M-d)1.4.4 Killing And Yanking

M
mark-modified-lines1.3.1 Readline Init File Syntax
mark-symlinked-directories1.3.1 Readline Init File Syntax
match-hidden-files1.3.1 Readline Init File Syntax
menu-complete ()1.4.6 Letting Readline Type For You
menu-complete ()1.4.6 Letting Readline Type For You
menu-complete-backward ()1.4.6 Letting Readline Type For You
menu-complete-backward ()1.4.6 Letting Readline Type For You
menu-complete-display-prefix1.3.1 Readline Init File Syntax
meta-flag1.3.1 Readline Init File Syntax
mark-modified-lines1.3.1 Readline Init File Syntax
mark-symlinked-directories1.3.1 Readline Init File Syntax
match-hidden-files1.3.1 Readline Init File Syntax
menu-complete ()1.4.6 Letting Readline Type For You
menu-complete ()1.4.6 Letting Readline Type For You
menu-complete-backward ()1.4.6 Letting Readline Type For You
menu-complete-backward ()1.4.6 Letting Readline Type For You
menu-complete-display-prefix1.3.1 Readline Init File Syntax
meta-flag1.3.1 Readline Init File Syntax

N
next-history (C-n)1.4.2 Commands For Manipulating The History
next-history (C-n)1.4.2 Commands For Manipulating The History
non-incremental-forward-search-history (M-n)1.4.2 Commands For Manipulating The History
non-incremental-forward-search-history (M-n)1.4.2 Commands For Manipulating The History
non-incremental-reverse-search-history (M-p)1.4.2 Commands For Manipulating The History
non-incremental-reverse-search-history (M-p)1.4.2 Commands For Manipulating The History
next-history (C-n)1.4.2 Commands For Manipulating The History
next-history (C-n)1.4.2 Commands For Manipulating The History
next-screen-line ()1.4.1 Commands For Moving
next-screen-line ()1.4.1 Commands For Moving
non-incremental-forward-search-history (M-n)1.4.2 Commands For Manipulating The History
non-incremental-forward-search-history (M-n)1.4.2 Commands For Manipulating The History
non-incremental-reverse-search-history (M-p)1.4.2 Commands For Manipulating The History
non-incremental-reverse-search-history (M-p)1.4.2 Commands For Manipulating The History

O
output-meta1.3.1 Readline Init File Syntax
overwrite-mode ()1.4.3 Commands For Changing Text
overwrite-mode ()1.4.3 Commands For Changing Text
operate-and-get-next (C-o)1.4.2 Commands For Manipulating The History
operate-and-get-next (C-o)1.4.2 Commands For Manipulating The History
output-meta1.3.1 Readline Init File Syntax
overwrite-mode ()1.4.3 Commands For Changing Text
overwrite-mode ()1.4.3 Commands For Changing Text

P
page-completions1.3.1 Readline Init File Syntax
possible-completions (M-?)1.4.6 Letting Readline Type For You
possible-completions (M-?)1.4.6 Letting Readline Type For You
prefix-meta (ESC)1.4.8 Some Miscellaneous Commands
prefix-meta (ESC)1.4.8 Some Miscellaneous Commands
previous-history (C-p)1.4.2 Commands For Manipulating The History
previous-history (C-p)1.4.2 Commands For Manipulating The History
print-last-kbd-macro ()1.4.7 Keyboard Macros
print-last-kbd-macro ()1.4.7 Keyboard Macros
page-completions1.3.1 Readline Init File Syntax
possible-completions (M-?)1.4.6 Letting Readline Type For You
possible-completions (M-?)1.4.6 Letting Readline Type For You
prefix-meta (ESC)1.4.8 Some Miscellaneous Commands
prefix-meta (ESC)1.4.8 Some Miscellaneous Commands
previous-history (C-p)1.4.2 Commands For Manipulating The History
previous-history (C-p)1.4.2 Commands For Manipulating The History
previous-screen-line ()1.4.1 Commands For Moving
previous-screen-line ()1.4.1 Commands For Moving
print-last-kbd-macro ()1.4.7 Keyboard Macros
print-last-kbd-macro ()1.4.7 Keyboard Macros

Q
quoted-insert (C-q or C-v)1.4.3 Commands For Changing Text
quoted-insert (C-q or C-v)1.4.3 Commands For Changing Text
quoted-insert (C-q or C-v)1.4.3 Commands For Changing Text
quoted-insert (C-q or C-v)1.4.3 Commands For Changing Text

R
re-read-init-file (C-x C-r)1.4.8 Some Miscellaneous Commands
re-read-init-file (C-x C-r)1.4.8 Some Miscellaneous Commands
readline2.1 Basic Behavior
redraw-current-line ()1.4.1 Commands For Moving
redraw-current-line ()1.4.1 Commands For Moving
reverse-search-history (C-r)1.4.2 Commands For Manipulating The History
reverse-search-history (C-r)1.4.2 Commands For Manipulating The History
revert-all-at-newline1.3.1 Readline Init File Syntax
revert-line (M-r)1.4.8 Some Miscellaneous Commands
revert-line (M-r)1.4.8 Some Miscellaneous Commands
rl_add_defun2.4.1 Naming a Function
rl_add_funmap_entry2.4.4 Associating Function Names and Bindings
rl_add_undo2.4.5 Allowing Undoing
rl_alphabetic2.4.10 Utility Functions
rl_already_prompted2.3 Readline Variables
rl_attempted_completion_function2.6.3 Completion Variables
rl_attempted_completion_over2.6.3 Completion Variables
rl_basic_quote_characters2.6.3 Completion Variables
rl_basic_word_break_characters2.6.3 Completion Variables
rl_begin_undo_group2.4.5 Allowing Undoing
rl_bind_key2.4.3 Binding Keys
rl_bind_key_if_unbound2.4.3 Binding Keys
rl_bind_key_if_unbound_in_map2.4.3 Binding Keys
rl_bind_key_in_map2.4.3 Binding Keys
rl_bind_keyseq2.4.3 Binding Keys
rl_bind_keyseq_if_unbound2.4.3 Binding Keys
rl_bind_keyseq_if_unbound_in_map2.4.3 Binding Keys
rl_bind_keyseq_in_map2.4.3 Binding Keys
rl_binding_keymap2.3 Readline Variables
rl_callback_handler_install2.4.12 Alternate Interface
rl_callback_handler_remove2.4.12 Alternate Interface
rl_callback_read_char2.4.12 Alternate Interface
rl_catch_signals2.5 Readline Signal Handling
rl_catch_sigwinch2.5 Readline Signal Handling
rl_change_environment2.5 Readline Signal Handling
rl_char_is_quoted_p2.6.3 Completion Variables
rl_cleanup_after_signal2.5 Readline Signal Handling
rl_clear_history2.4.11 Miscellaneous Functions
rl_clear_message2.4.6 Redisplay
rl_clear_pending_input2.4.8 Character Input
rl_clear_signals2.5 Readline Signal Handling
rl_complete2.6.1 How Completing Works
rl_complete2.6.2 Completion Functions
rl_complete_internal2.6.2 Completion Functions
rl_completer_quote_characters2.6.3 Completion Variables
rl_completer_word_break_characters2.6.3 Completion Variables
rl_completion_append_character2.6.3 Completion Variables
rl_completion_display_matches_hook2.6.3 Completion Variables
rl_completion_entry_function2.6.1 How Completing Works
rl_completion_entry_function2.6.3 Completion Variables
rl_completion_found_quote2.6.3 Completion Variables
rl_completion_invoking_key2.6.3 Completion Variables
rl_completion_mark_symlink_dirs2.6.3 Completion Variables
rl_completion_matches2.6.2 Completion Functions
rl_completion_mode2.6.2 Completion Functions
rl_completion_query_items2.6.3 Completion Variables
rl_completion_quote_character2.6.3 Completion Variables
rl_completion_suppress_append2.6.3 Completion Variables
rl_completion_suppress_quote2.6.3 Completion Variables
rl_completion_type2.6.3 Completion Variables
rl_completion_word_break_hook2.6.3 Completion Variables
rl_copy_keymap2.4.2 Selecting a Keymap
rl_copy_text2.4.7 Modifying Text
rl_crlf2.4.6 Redisplay
rl_delete_text2.4.7 Modifying Text
rl_deprep_term_function2.3 Readline Variables
rl_deprep_terminal2.4.9 Terminal Management
rl_ding2.4.10 Utility Functions
rl_directory_completion_hook2.6.3 Completion Variables
rl_directory_rewrite_hook;2.6.3 Completion Variables
rl_discard_keymap2.4.2 Selecting a Keymap
rl_dispatching2.3 Readline Variables
rl_display_match_list2.4.10 Utility Functions
rl_display_prompt2.3 Readline Variables
rl_do_undo2.4.5 Allowing Undoing
rl_done2.3 Readline Variables
rl_echo_signal_char2.5 Readline Signal Handling
rl_editing_mode2.3 Readline Variables
rl_end2.3 Readline Variables
rl_end_undo_group2.4.5 Allowing Undoing
rl_erase_empty_line2.3 Readline Variables
rl_event_hook2.3 Readline Variables
rl_execute_next2.4.8 Character Input
rl_executing_key2.3 Readline Variables
rl_executing_keymap2.3 Readline Variables
rl_executing_keyseq2.3 Readline Variables
rl_executing_macro2.3 Readline Variables
rl_expand_prompt2.4.6 Redisplay
rl_explicit_arg2.3 Readline Variables
rl_extend_line_buffer2.4.10 Utility Functions
rl_filename_completion_desired2.6.3 Completion Variables
rl_filename_completion_function2.6.2 Completion Functions
rl_filename_dequoting_function2.6.3 Completion Variables
rl_filename_quote_characters2.6.3 Completion Variables
rl_filename_quoting_desired2.6.3 Completion Variables
rl_filename_quoting_function2.6.3 Completion Variables
rl_filename_rewrite_hook2.6.3 Completion Variables
rl_filename_stat_hook2.6.3 Completion Variables
rl_forced_update_display2.4.6 Redisplay
rl_free2.4.10 Utility Functions
rl_free_keymap2.4.2 Selecting a Keymap
rl_free_line_state2.5 Readline Signal Handling
rl_free_undo_list2.4.5 Allowing Undoing
rl_function_dumper2.4.4 Associating Function Names and Bindings
rl_function_of_keyseq2.4.4 Associating Function Names and Bindings
rl_funmap_names2.4.4 Associating Function Names and Bindings
rl_generic_bind2.4.3 Binding Keys
rl_get_keymap2.4.2 Selecting a Keymap
rl_get_keymap_by_name2.4.2 Selecting a Keymap
rl_get_keymap_name2.4.2 Selecting a Keymap
rl_get_screen_size2.5 Readline Signal Handling
rl_get_termcap2.4.11 Miscellaneous Functions
rl_getc2.4.8 Character Input
rl_getc_function2.3 Readline Variables
rl_gnu_readline_p2.3 Readline Variables
rl_ignore_completion_duplicates2.6.3 Completion Variables
rl_ignore_some_completions_function2.6.3 Completion Variables
rl_inhibit_completion2.6.3 Completion Variables
rl_initialize2.4.10 Utility Functions
rl_input_available_hook2.3 Readline Variables
rl_insert_completions2.6.2 Completion Functions
rl_insert_text2.4.7 Modifying Text
rl_instream2.3 Readline Variables
rl_invoking_keyseqs2.4.4 Associating Function Names and Bindings
rl_invoking_keyseqs_in_map2.4.4 Associating Function Names and Bindings
rl_key_sequence_length2.3 Readline Variables
rl_kill_text2.4.7 Modifying Text
rl_last_func2.3 Readline Variables
rl_library_version2.3 Readline Variables
rl_line_buffer2.3 Readline Variables
rl_list_funmap_names2.4.4 Associating Function Names and Bindings
rl_macro_bind2.4.11 Miscellaneous Functions
rl_macro_dumper2.4.11 Miscellaneous Functions
rl_make_bare_keymap2.4.2 Selecting a Keymap
rl_make_keymap2.4.2 Selecting a Keymap
rl_mark2.3 Readline Variables
rl_message2.4.6 Redisplay
rl_modifying2.4.5 Allowing Undoing
rl_named_function2.4.4 Associating Function Names and Bindings
rl_num_chars_to_read2.3 Readline Variables
rl_numeric_arg2.3 Readline Variables
rl_on_new_line2.4.6 Redisplay
rl_on_new_line_with_prompt2.4.6 Redisplay
rl_outstream2.3 Readline Variables
rl_parse_and_bind2.4.3 Binding Keys
rl_pending_input2.3 Readline Variables
rl_point2.3 Readline Variables
rl_possible_completions2.6.2 Completion Functions
rl_pre_input_hook2.3 Readline Variables
rl_prefer_env_winsize2.3 Readline Variables
rl_prep_term_function2.3 Readline Variables
rl_prep_terminal2.4.9 Terminal Management
rl_prompt2.3 Readline Variables
rl_push_macro_input2.4.7 Modifying Text
rl_read_init_file2.4.3 Binding Keys
rl_read_key2.4.8 Character Input
rl_readline_name2.3 Readline Variables
rl_readline_state2.3 Readline Variables
rl_readline_version2.3 Readline Variables
rl_redisplay2.4.6 Redisplay
rl_redisplay_function2.3 Readline Variables
rl_replace_line2.4.10 Utility Functions
rl_reset_after_signal2.5 Readline Signal Handling
rl_reset_line_state2.4.6 Redisplay
rl_reset_screen_size2.5 Readline Signal Handling
rl_reset_terminal2.4.9 Terminal Management
rl_resize_terminal2.5 Readline Signal Handling
rl_restore_prompt2.4.6 Redisplay
rl_restore_state2.4.10 Utility Functions
rl_save_prompt2.4.6 Redisplay
rl_save_state2.4.10 Utility Functions
rl_set_key2.4.3 Binding Keys
rl_set_keyboard_input_timeout2.4.8 Character Input
rl_set_keymap2.4.2 Selecting a Keymap
rl_set_paren_blink_timeout2.4.11 Miscellaneous Functions
rl_set_prompt2.4.6 Redisplay
rl_set_screen_size2.5 Readline Signal Handling
rl_set_signals2.5 Readline Signal Handling
rl_show_char2.4.6 Redisplay
rl_signal_event_hook2.3 Readline Variables
rl_sort_completion_matches2.6.3 Completion Variables
rl_special_prefixes2.6.3 Completion Variables
rl_startup_hook2.3 Readline Variables
rl_stuff_char2.4.8 Character Input
rl_terminal_name2.3 Readline Variables
rl_tty_set_default_bindings2.4.9 Terminal Management
rl_tty_unset_default_bindings2.4.9 Terminal Management
rl_unbind_command_in_map2.4.3 Binding Keys
rl_unbind_function_in_map2.4.3 Binding Keys
rl_unbind_key2.4.3 Binding Keys
rl_unbind_key_in_map2.4.3 Binding Keys
rl_username_completion_function2.6.2 Completion Functions
rl_variable_bind2.4.11 Miscellaneous Functions
rl_variable_dumper2.4.11 Miscellaneous Functions
rl_variable_value2.4.11 Miscellaneous Functions
re-read-init-file (C-x C-r)1.4.8 Some Miscellaneous Commands
re-read-init-file (C-x C-r)1.4.8 Some Miscellaneous Commands
readline2.1 Basic Behavior
redraw-current-line ()1.4.1 Commands For Moving
redraw-current-line ()1.4.1 Commands For Moving
reverse-search-history (C-r)1.4.2 Commands For Manipulating The History
reverse-search-history (C-r)1.4.2 Commands For Manipulating The History
revert-all-at-newline1.3.1 Readline Init File Syntax
revert-line (M-r)1.4.8 Some Miscellaneous Commands
revert-line (M-r)1.4.8 Some Miscellaneous Commands
rl_activate_mark2.4.11 Miscellaneous Functions
rl_add_defun2.4.1 Naming a Function
rl_add_funmap_entry2.4.4 Associating Function Names and Bindings
rl_add_undo2.4.5 Allowing Undoing
rl_alphabetic2.4.10 Utility Functions
rl_already_prompted2.3 Readline Variables
rl_attempted_completion_function2.6.3 Completion Variables
rl_attempted_completion_over2.6.3 Completion Variables
rl_basic_quote_characters2.6.3 Completion Variables
rl_basic_word_break_characters2.6.3 Completion Variables
rl_begin_undo_group2.4.5 Allowing Undoing
rl_bind_key2.4.3 Binding Keys
rl_bind_key_if_unbound2.4.3 Binding Keys
rl_bind_key_if_unbound_in_map2.4.3 Binding Keys
rl_bind_key_in_map2.4.3 Binding Keys
rl_bind_keyseq2.4.3 Binding Keys
rl_bind_keyseq_if_unbound2.4.3 Binding Keys
rl_bind_keyseq_if_unbound_in_map2.4.3 Binding Keys
rl_bind_keyseq_in_map2.4.3 Binding Keys
rl_binding_keymap2.3 Readline Variables
rl_callback_handler_install2.4.12 Alternate Interface
rl_callback_handler_remove2.4.12 Alternate Interface
rl_callback_read_char2.4.12 Alternate Interface
rl_callback_sigcleanup2.4.12 Alternate Interface
rl_catch_signals2.5 Readline Signal Handling
rl_catch_sigwinch2.5 Readline Signal Handling
rl_change_environment2.5 Readline Signal Handling
rl_char_is_quoted_p2.6.3 Completion Variables
rl_check_signals2.5 Readline Signal Handling
rl_cleanup_after_signal2.5 Readline Signal Handling
rl_clear_history2.4.11 Miscellaneous Functions
rl_clear_message2.4.6 Redisplay
rl_clear_pending_input2.4.8 Character Input
rl_clear_signals2.5 Readline Signal Handling
rl_clear_visible_line2.4.6 Redisplay
rl_complete2.6.1 How Completing Works
rl_complete2.6.2 Completion Functions
rl_complete_internal2.6.2 Completion Functions
rl_completer_quote_characters2.6.3 Completion Variables
rl_completer_word_break_characters2.6.3 Completion Variables
rl_completion_append_character2.6.3 Completion Variables
rl_completion_display_matches_hook2.6.3 Completion Variables
rl_completion_entry_function2.6.1 How Completing Works
rl_completion_entry_function2.6.3 Completion Variables
rl_completion_found_quote2.6.3 Completion Variables
rl_completion_invoking_key2.6.3 Completion Variables
rl_completion_mark_symlink_dirs2.6.3 Completion Variables
rl_completion_matches2.6.2 Completion Functions
rl_completion_mode2.6.2 Completion Functions
rl_completion_query_items2.6.3 Completion Variables
rl_completion_quote_character2.6.3 Completion Variables
rl_completion_suppress_append2.6.3 Completion Variables
rl_completion_suppress_quote2.6.3 Completion Variables
rl_completion_type2.6.3 Completion Variables
rl_completion_word_break_hook2.6.3 Completion Variables
rl_copy_keymap2.4.2 Selecting a Keymap
rl_copy_text2.4.7 Modifying Text
rl_crlf2.4.6 Redisplay
rl_deactivate_mark2.4.11 Miscellaneous Functions
rl_delete_text2.4.7 Modifying Text
rl_deprep_term_function2.3 Readline Variables
rl_deprep_terminal2.4.9 Terminal Management
rl_ding2.4.10 Utility Functions
rl_directory_completion_hook2.6.3 Completion Variables
rl_directory_rewrite_hook;2.6.3 Completion Variables
rl_discard_keymap2.4.2 Selecting a Keymap
rl_dispatching2.3 Readline Variables
rl_display_match_list2.4.10 Utility Functions
rl_display_prompt2.3 Readline Variables
rl_do_undo2.4.5 Allowing Undoing
rl_done2.3 Readline Variables
rl_echo_signal_char2.5 Readline Signal Handling
rl_editing_mode2.3 Readline Variables
rl_empty_keymap2.4.2 Selecting a Keymap
rl_end2.3 Readline Variables
rl_end_undo_group2.4.5 Allowing Undoing
rl_erase_empty_line2.3 Readline Variables
rl_event_hook2.3 Readline Variables
rl_execute_next2.4.8 Character Input
rl_executing_key2.3 Readline Variables
rl_executing_keymap2.3 Readline Variables
rl_executing_keyseq2.3 Readline Variables
rl_executing_macro2.3 Readline Variables
rl_expand_prompt2.4.6 Redisplay
rl_explicit_arg2.3 Readline Variables
rl_extend_line_buffer2.4.10 Utility Functions
rl_filename_completion_desired2.6.3 Completion Variables
rl_filename_completion_function2.6.2 Completion Functions
rl_filename_dequoting_function2.6.3 Completion Variables
rl_filename_quote_characters2.6.3 Completion Variables
rl_filename_quoting_desired2.6.3 Completion Variables
rl_filename_quoting_function2.6.3 Completion Variables
rl_filename_rewrite_hook2.6.3 Completion Variables
rl_filename_stat_hook2.6.3 Completion Variables
rl_forced_update_display2.4.6 Redisplay
rl_free2.4.10 Utility Functions
rl_free_keymap2.4.2 Selecting a Keymap
rl_free_line_state2.5 Readline Signal Handling
rl_free_undo_list2.4.5 Allowing Undoing
rl_function_dumper2.4.4 Associating Function Names and Bindings
rl_function_of_keyseq2.4.4 Associating Function Names and Bindings
rl_function_of_keyseq_len2.4.4 Associating Function Names and Bindings
rl_funmap_names2.4.4 Associating Function Names and Bindings
rl_generic_bind2.4.3 Binding Keys
rl_get_keymap2.4.2 Selecting a Keymap
rl_get_keymap_by_name2.4.2 Selecting a Keymap
rl_get_keymap_name2.4.2 Selecting a Keymap
rl_get_screen_size2.5 Readline Signal Handling
rl_get_termcap2.4.11 Miscellaneous Functions
rl_getc2.4.8 Character Input
rl_getc_function2.3 Readline Variables
rl_gnu_readline_p2.3 Readline Variables
rl_ignore_completion_duplicates2.6.3 Completion Variables
rl_ignore_some_completions_function2.6.3 Completion Variables
rl_inhibit_completion2.6.3 Completion Variables
rl_initialize2.4.10 Utility Functions
rl_input_available_hook2.3 Readline Variables
rl_insert_completions2.6.2 Completion Functions
rl_insert_text2.4.7 Modifying Text
rl_instream2.3 Readline Variables
rl_invoking_keyseqs2.4.4 Associating Function Names and Bindings
rl_invoking_keyseqs_in_map2.4.4 Associating Function Names and Bindings
rl_keep_mark_active2.4.11 Miscellaneous Functions
rl_key_sequence_length2.3 Readline Variables
rl_kill_text2.4.7 Modifying Text
rl_last_func2.3 Readline Variables
rl_library_version2.3 Readline Variables
rl_line_buffer2.3 Readline Variables
rl_list_funmap_names2.4.4 Associating Function Names and Bindings
rl_macro_bind2.4.11 Miscellaneous Functions
rl_macro_dumper2.4.11 Miscellaneous Functions
rl_make_bare_keymap2.4.2 Selecting a Keymap
rl_make_keymap2.4.2 Selecting a Keymap
rl_mark2.3 Readline Variables
rl_mark_active_p2.4.11 Miscellaneous Functions
rl_message2.4.6 Redisplay
rl_modifying2.4.5 Allowing Undoing
rl_named_function2.4.4 Associating Function Names and Bindings
rl_num_chars_to_read2.3 Readline Variables
rl_numeric_arg2.3 Readline Variables
rl_on_new_line2.4.6 Redisplay
rl_on_new_line_with_prompt2.4.6 Redisplay
rl_outstream2.3 Readline Variables
rl_parse_and_bind2.4.3 Binding Keys
rl_pending_input2.3 Readline Variables
rl_pending_signal2.5 Readline Signal Handling
rl_persistent_signal_handlers2.5 Readline Signal Handling
rl_point2.3 Readline Variables
rl_possible_completions2.6.2 Completion Functions
rl_pre_input_hook2.3 Readline Variables
rl_prefer_env_winsize2.3 Readline Variables
rl_prep_term_function2.3 Readline Variables
rl_prep_terminal2.4.9 Terminal Management
rl_prompt2.3 Readline Variables
rl_push_macro_input2.4.7 Modifying Text
rl_read_init_file2.4.3 Binding Keys
rl_read_key2.4.8 Character Input
rl_readline_name2.3 Readline Variables
rl_readline_state2.3 Readline Variables
rl_readline_version2.3 Readline Variables
rl_redisplay2.4.6 Redisplay
rl_redisplay_function2.3 Readline Variables
rl_replace_line2.4.10 Utility Functions
rl_reset_after_signal2.5 Readline Signal Handling
rl_reset_line_state2.4.6 Redisplay
rl_reset_screen_size2.5 Readline Signal Handling
rl_reset_terminal2.4.9 Terminal Management
rl_resize_terminal2.5 Readline Signal Handling
rl_restore_prompt2.4.6 Redisplay
rl_restore_state2.4.10 Utility Functions
rl_save_prompt2.4.6 Redisplay
rl_save_state2.4.10 Utility Functions
rl_set_key2.4.3 Binding Keys
rl_set_keyboard_input_timeout2.4.8 Character Input
rl_set_keymap2.4.2 Selecting a Keymap
rl_set_keymap_name2.4.2 Selecting a Keymap
rl_set_paren_blink_timeout2.4.11 Miscellaneous Functions
rl_set_prompt2.4.6 Redisplay
rl_set_screen_size2.5 Readline Signal Handling
rl_set_signals2.5 Readline Signal Handling
rl_show_char2.4.6 Redisplay
rl_signal_event_hook2.3 Readline Variables
rl_sort_completion_matches2.6.3 Completion Variables
rl_special_prefixes2.6.3 Completion Variables
rl_startup_hook2.3 Readline Variables
rl_stuff_char2.4.8 Character Input
rl_terminal_name2.3 Readline Variables
rl_tty_set_default_bindings2.4.9 Terminal Management
rl_tty_set_echoing2.4.9 Terminal Management
rl_tty_unset_default_bindings2.4.9 Terminal Management
rl_unbind_command_in_map2.4.3 Binding Keys
rl_unbind_function_in_map2.4.3 Binding Keys
rl_unbind_key2.4.3 Binding Keys
rl_unbind_key_in_map2.4.3 Binding Keys
rl_username_completion_function2.6.2 Completion Functions
rl_variable_bind2.4.11 Miscellaneous Functions
rl_variable_dumper2.4.11 Miscellaneous Functions
rl_variable_value2.4.11 Miscellaneous Functions

S
self-insert (a, b, A, 1, !, <small>...</small>)1.4.3 Commands For Changing Text
self-insert (a, b, A, 1, !, <small>...</small>)1.4.3 Commands For Changing Text
set-mark (C-@)1.4.8 Some Miscellaneous Commands
set-mark (C-@)1.4.8 Some Miscellaneous Commands
show-all-if-ambiguous1.3.1 Readline Init File Syntax
show-all-if-unmodified1.3.1 Readline Init File Syntax
show-mode-in-prompt1.3.1 Readline Init File Syntax
skip-completed-text1.3.1 Readline Init File Syntax
skip-csi-sequence ()1.4.8 Some Miscellaneous Commands
skip-csi-sequence ()1.4.8 Some Miscellaneous Commands
start-kbd-macro (C-x ()1.4.7 Keyboard Macros
start-kbd-macro (C-x ()1.4.7 Keyboard Macros
self-insert (a, b, A, 1, !, <small>...</small>)1.4.3 Commands For Changing Text
self-insert (a, b, A, 1, !, <small>...</small>)1.4.3 Commands For Changing Text
set-mark (C-@)1.4.8 Some Miscellaneous Commands
set-mark (C-@)1.4.8 Some Miscellaneous Commands
shell-transpose-words (M-C-t)1.4.4 Killing And Yanking
shell-transpose-words (M-C-t)1.4.4 Killing And Yanking
show-all-if-ambiguous1.3.1 Readline Init File Syntax
show-all-if-unmodified1.3.1 Readline Init File Syntax
show-mode-in-prompt1.3.1 Readline Init File Syntax
skip-completed-text1.3.1 Readline Init File Syntax
skip-csi-sequence ()1.4.8 Some Miscellaneous Commands
skip-csi-sequence ()1.4.8 Some Miscellaneous Commands
start-kbd-macro (C-x ()1.4.7 Keyboard Macros
start-kbd-macro (C-x ()1.4.7 Keyboard Macros

T
tab-insert (M-TAB)1.4.3 Commands For Changing Text
tab-insert (M-TAB)1.4.3 Commands For Changing Text
tilde-expand (M-~)1.4.8 Some Miscellaneous Commands
tilde-expand (M-~)1.4.8 Some Miscellaneous Commands
transpose-chars (C-t)1.4.3 Commands For Changing Text
transpose-chars (C-t)1.4.3 Commands For Changing Text
transpose-words (M-t)1.4.3 Commands For Changing Text
transpose-words (M-t)1.4.3 Commands For Changing Text
tab-insert (M-TAB)1.4.3 Commands For Changing Text
tab-insert (M-TAB)1.4.3 Commands For Changing Text
tilde-expand (M-~)1.4.8 Some Miscellaneous Commands
tilde-expand (M-~)1.4.8 Some Miscellaneous Commands
transpose-chars (C-t)1.4.3 Commands For Changing Text
transpose-chars (C-t)1.4.3 Commands For Changing Text
transpose-words (M-t)1.4.3 Commands For Changing Text
transpose-words (M-t)1.4.3 Commands For Changing Text

U
undo (C-_ or C-x C-u)1.4.8 Some Miscellaneous Commands
undo (C-_ or C-x C-u)1.4.8 Some Miscellaneous Commands
universal-argument ()1.4.5 Specifying Numeric Arguments
universal-argument ()1.4.5 Specifying Numeric Arguments
unix-filename-rubout ()1.4.4 Killing And Yanking
unix-filename-rubout ()1.4.4 Killing And Yanking
unix-line-discard (C-u)1.4.4 Killing And Yanking
unix-line-discard (C-u)1.4.4 Killing And Yanking
unix-word-rubout (C-w)1.4.4 Killing And Yanking
unix-word-rubout (C-w)1.4.4 Killing And Yanking
upcase-word (M-u)1.4.3 Commands For Changing Text
upcase-word (M-u)1.4.3 Commands For Changing Text
undo (C-_ or C-x C-u)1.4.8 Some Miscellaneous Commands
undo (C-_ or C-x C-u)1.4.8 Some Miscellaneous Commands
universal-argument ()1.4.5 Specifying Numeric Arguments
universal-argument ()1.4.5 Specifying Numeric Arguments
unix-filename-rubout ()1.4.4 Killing And Yanking
unix-filename-rubout ()1.4.4 Killing And Yanking
unix-line-discard (C-u)1.4.4 Killing And Yanking
unix-line-discard (C-u)1.4.4 Killing And Yanking
unix-word-rubout (C-w)1.4.4 Killing And Yanking
unix-word-rubout (C-w)1.4.4 Killing And Yanking
upcase-word (M-u)1.4.3 Commands For Changing Text
upcase-word (M-u)1.4.3 Commands For Changing Text

V
vi-editing-mode (M-C-j)1.4.8 Some Miscellaneous Commands
vi-editing-mode (M-C-j)1.4.8 Some Miscellaneous Commands
visible-stats1.3.1 Readline Init File Syntax
vi-cmd-mode-string1.3.1 Readline Init File Syntax
vi-editing-mode (M-C-j)1.4.8 Some Miscellaneous Commands
vi-editing-mode (M-C-j)1.4.8 Some Miscellaneous Commands
vi-ins-mode-string1.3.1 Readline Init File Syntax
visible-stats1.3.1 Readline Init File Syntax

Y
yank (C-y)1.4.4 Killing And Yanking
yank (C-y)1.4.4 Killing And Yanking
yank-last-arg (M-. or M-_)1.4.2 Commands For Manipulating The History
yank-last-arg (M-. or M-_)1.4.2 Commands For Manipulating The History
yank-nth-arg (M-C-y)1.4.2 Commands For Manipulating The History
yank-nth-arg (M-C-y)1.4.2 Commands For Manipulating The History
yank-pop (M-y)1.4.4 Killing And Yanking
yank-pop (M-y)1.4.4 Killing And Yanking
yank (C-y)1.4.4 Killing And Yanking
yank (C-y)1.4.4 Killing And Yanking
yank-last-arg (M-. or M-_)1.4.2 Commands For Manipulating The History
yank-last-arg (M-. or M-_)1.4.2 Commands For Manipulating The History
yank-nth-arg (M-C-y)1.4.2 Commands For Manipulating The History
yank-nth-arg (M-C-y)1.4.2 Commands For Manipulating The History
yank-pop (M-y)1.4.4 Killing And Yanking
yank-pop (M-y)1.4.4 Killing And Yanking

Jump to:   _   @@ -7165,7 +7599,7 @@ to permit their use in free software. [ ? ]

About this document

-This document was generated by Chet Ramey on February, 11 2014 +This document was generated by Chet Ramey on October, 30 2020 using texi2html

@@ -7327,7 +7761,7 @@ the following structure:
This document was generated -by Chet Ramey on February, 11 2014 +by Chet Ramey on October, 30 2020 using texi2html