embedaddon/readline/doc/rluser.texi - diff

Return to rluser.texi CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / readline / doc

Diff for /embedaddon/readline/doc/rluser.texi between versions 1.1.1.1 and 1.1.1.2

version 1.1.1.1, 2014/07/30 08:16:45	version 1.1.1.2, 2021/03/17 01:01:01
Line 9 use these features. There is a document entitled "rea	Line 9 use these features. There is a document entitled "rea
which contains both end-user and programmer documentation for the	which contains both end-user and programmer documentation for the
GNU Readline Library.	GNU Readline Library.

Copyright (C) 1988--2014 Free Software Foundation, Inc.	Copyright (C) 1988--2020 Free Software Foundation, Inc.

Authored by Brian Fox and Chet Ramey.	Authored by Brian Fox and Chet Ramey.

Line 350 file is taken from the value of the environment variab	Line 350 file is taken from the value of the environment variab
that variable is unset, the default is @file{~/.inputrc}. If that	that variable is unset, the default is @file{~/.inputrc}. If that
file does not exist or cannot be read, the ultimate default is	file does not exist or cannot be read, the ultimate default is
@file{/etc/inputrc}.	@file{/etc/inputrc}.
	@ifset BashFeatures
	The @w{@code{bind}} builtin command can also be used to set Readline
	keybindings and variables.
	@xref{Bash Builtins}.
	@end ifset

When a program which uses the Readline library starts up, the	When a program which uses the Readline library starts up, the
init file is read, and the key bindings are set.	init file is read, and the key bindings are set.
Line 423 the terminal's bell.	Line 428 the terminal's bell.

@item bind-tty-special-chars	@item bind-tty-special-chars
@vindex bind-tty-special-chars	@vindex bind-tty-special-chars
If set to @samp{on}, Readline attempts to bind the control characters	If set to @samp{on} (the default), Readline attempts to bind the control
treated specially by the kernel's terminal driver to their Readline	characters treated specially by the kernel's terminal driver to their
equivalents.	Readline equivalents.

	@item blink-matching-paren
	@vindex blink-matching-paren
	If set to @samp{on}, Readline attempts to briefly move the cursor to an
	opening parenthesis when a closing parenthesis is inserted. The default
	is @samp{off}.

	@item colored-completion-prefix
	@vindex colored-completion-prefix
	If set to @samp{on}, when listing completions, Readline displays the
	common prefix of the set of possible completions using a different color.
	The color definitions are taken from the value of the @env{LS_COLORS}
	environment variable.
	The default is @samp{off}.

@item colored-stats	@item colored-stats
@vindex colored-stats	@vindex colored-stats
If set to @samp{on}, Readline displays possible completions using different	If set to @samp{on}, Readline displays possible completions using different
Line 461 The default value is @samp{off}.	Line 480 The default value is @samp{off}.
If set to @samp{on}, and @var{completion-ignore-case} is enabled, Readline	If set to @samp{on}, and @var{completion-ignore-case} is enabled, Readline
treats hyphens (@samp{-}) and underscores (@samp{_}) as equivalent when	treats hyphens (@samp{-}) and underscores (@samp{_}) as equivalent when
performing case-insensitive filename matching and completion.	performing case-insensitive filename matching and completion.
	The default value is @samp{off}.

@item completion-prefix-display-length	@item completion-prefix-display-length
@vindex completion-prefix-display-length	@vindex completion-prefix-display-length
Line 473 replaced with an ellipsis when displaying possible com	Line 493 replaced with an ellipsis when displaying possible com
@vindex completion-query-items	@vindex completion-query-items
The number of possible completions that determines when the user is	The number of possible completions that determines when the user is
asked whether the list of possibilities should be displayed.	asked whether the list of possibilities should be displayed.
If the number of possible completions is greater than this value,	If the number of possible completions is greater than or equal to this value,
Readline will ask the user whether or not he wishes to view	Readline will ask whether or not the user wishes to view them;
them; otherwise, they are simply listed.	otherwise, they are simply listed.
This variable must be set to an integer value greater than or equal to 0.	This variable must be set to an integer value greater than or equal to 0.
A negative value means Readline should never ask.	A negative value means Readline should never ask.
The default limit is @code{100}.	The default limit is @code{100}.
Line 485 The default limit is @code{100}.	Line 505 The default limit is @code{100}.
If set to @samp{on}, Readline will convert characters with the	If set to @samp{on}, Readline will convert characters with the
eighth bit set to an @sc{ascii} key sequence by stripping the eighth	eighth bit set to an @sc{ascii} key sequence by stripping the eighth
bit and prefixing an @key{ESC} character, converting them to a	bit and prefixing an @key{ESC} character, converting them to a
meta-prefixed key sequence. The default value is @samp{on}.	meta-prefixed key sequence. The default value is @samp{on}, but
	will be set to @samp{off} if the locale is one that contains
	eight-bit characters.

@item disable-completion	@item disable-completion
@vindex disable-completion	@vindex disable-completion
Line 493 If set to @samp{On}, Readline will inhibit word comple	Line 515 If set to @samp{On}, Readline will inhibit word comple
Completion characters will be inserted into the line as if they had	Completion characters will be inserted into the line as if they had
been mapped to @code{self-insert}. The default is @samp{off}.	been mapped to @code{self-insert}. The default is @samp{off}.

	@item echo-control-characters
	@vindex echo-control-characters
	When set to @samp{on}, on operating systems that indicate they support it,
	readline echoes a character corresponding to a signal generated from the
	keyboard. The default is @samp{on}.

@item editing-mode	@item editing-mode
@vindex editing-mode	@vindex editing-mode
The @code{editing-mode} variable controls which default set of	The @code{editing-mode} variable controls which default set of
Line 500 key bindings is used. By default, Readline starts up	Line 528 key bindings is used. By default, Readline starts up
mode, where the keystrokes are most similar to Emacs. This variable can be	mode, where the keystrokes are most similar to Emacs. This variable can be
set to either @samp{emacs} or @samp{vi}.	set to either @samp{emacs} or @samp{vi}.

@item echo-control-characters	@item emacs-mode-string
When set to @samp{on}, on operating systems that indicate they support it,	@vindex emacs-mode-string
readline echoes a character corresponding to a signal generated from the	If the @var{show-mode-in-prompt} variable is enabled,
keyboard. The default is @samp{on}.	this string is displayed immediately before the last line of the primary
	prompt when emacs editing mode is active. The value is expanded like a
	key binding, so the standard set of meta- and control prefixes and
	backslash escape sequences is available.
	Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of
	non-printing characters, which can be used to embed a terminal control
	sequence into the mode string.
	The default is @samp{@@}.

	@item enable-bracketed-paste
	@vindex enable-bracketed-paste
	When set to @samp{On}, Readline will configure the terminal in a way
	that will enable it to insert each paste into the editing buffer as a
	single string of characters, instead of treating each character as if
	it had been read from the keyboard. This can prevent pasted characters
	from being interpreted as editing commands. The default is @samp{On}.

@item enable-keypad	@item enable-keypad
@vindex enable-keypad	@vindex enable-keypad
When set to @samp{on}, Readline will try to enable the application	When set to @samp{on}, Readline will try to enable the application
Line 537 are saved.	Line 580 are saved.
If set to a value less than zero, the number of history entries is not	If set to a value less than zero, the number of history entries is not
limited.	limited.
By default, the number of history entries is not limited.	By default, the number of history entries is not limited.
	If an attempt is made to set @var{history-size} to a non-numeric value,
	the maximum number of history entries will be set to 500.

@item horizontal-scroll-mode	@item horizontal-scroll-mode
@vindex horizontal-scroll-mode	@vindex horizontal-scroll-mode
This variable can be set to either @samp{on} or @samp{off}. Setting it	This variable can be set to either @samp{on} or @samp{off}. Setting it
to @samp{on} means that the text of the lines being edited will scroll	to @samp{on} means that the text of the lines being edited will scroll
horizontally on a single screen line when they are longer than the width	horizontally on a single screen line when they are longer than the width
of the screen, instead of wrapping onto a new screen line. By default,	of the screen, instead of wrapping onto a new screen line.
this variable is set to @samp{off}.	This variable is automatically set to @samp{on} for terminals of height 1.
	By default, this variable is set to @samp{off}.

@item input-meta	@item input-meta
@vindex input-meta	@vindex input-meta
Line 552 this variable is set to @samp{off}.	Line 598 this variable is set to @samp{off}.
If set to @samp{on}, Readline will enable eight-bit input (it	If set to @samp{on}, Readline will enable eight-bit input (it
will not clear the eighth bit in the characters it reads),	will not clear the eighth bit in the characters it reads),
regardless of what the terminal claims it can support. The	regardless of what the terminal claims it can support. The
default value is @samp{off}. The name @code{meta-flag} is a	default value is @samp{off}, but Readline will set it to @samp{on} if the
synonym for this variable.	locale contains eight-bit characters.
	The name @code{meta-flag} is a synonym for this variable.

@item isearch-terminators	@item isearch-terminators
@vindex isearch-terminators	@vindex isearch-terminators
Line 565 If this variable has not been given a value, the chara	Line 612 If this variable has not been given a value, the chara
@item keymap	@item keymap
@vindex keymap	@vindex keymap
Sets Readline's idea of the current keymap for key binding commands.	Sets Readline's idea of the current keymap for key binding commands.
Acceptable @code{keymap} names are	Built-in @code{keymap} names are
@code{emacs},	@code{emacs},
@code{emacs-standard},	@code{emacs-standard},
@code{emacs-meta},	@code{emacs-meta},
Line 574 Acceptable @code{keymap} names are	Line 621 Acceptable @code{keymap} names are
@code{vi-move},	@code{vi-move},
@code{vi-command}, and	@code{vi-command}, and
@code{vi-insert}.	@code{vi-insert}.
@code{vi} is equivalent to @code{vi-command}; @code{emacs} is	@code{vi} is equivalent to @code{vi-command} (@code{vi-move} is also a
equivalent to @code{emacs-standard}. The default value is @code{emacs}.	synonym); @code{emacs} is equivalent to @code{emacs-standard}.
	Applications may add additional names.
	The default value is @code{emacs}.
The value of the @code{editing-mode} variable also affects the	The value of the @code{editing-mode} variable also affects the
default keymap.	default keymap.

Line 631 the list. The default is @samp{off}.	Line 680 the list. The default is @samp{off}.
@vindex output-meta	@vindex output-meta
If set to @samp{on}, Readline will display characters with the	If set to @samp{on}, Readline will display characters with the
eighth bit set directly rather than as a meta-prefixed escape	eighth bit set directly rather than as a meta-prefixed escape
sequence. The default is @samp{off}.	sequence.
	The default is @samp{off}, but Readline will set it to @samp{on} if the
	locale contains eight-bit characters.

@item page-completions	@item page-completions
@vindex page-completions	@vindex page-completions
Line 672 The default value is @samp{off}.	Line 723 The default value is @samp{off}.

@item show-mode-in-prompt	@item show-mode-in-prompt
@vindex show-mode-in-prompt	@vindex show-mode-in-prompt
If set to @samp{on}, add a character to the beginning of the prompt	If set to @samp{on}, add a string to the beginning of the prompt
indicating the editing mode: emacs (@samp{@@}), vi command (@samp{:}),	indicating the editing mode: emacs, vi command, or vi insertion.
or vi insertion (@samp{+}).	The mode strings are user-settable (e.g., @var{emacs-mode-string}).
The default value is @samp{off}.	The default value is @samp{off}.

@item skip-completed-text	@item skip-completed-text
Line 691 rather than @samp{Makefilefile}, assuming there is a s	Line 742 rather than @samp{Makefilefile}, assuming there is a s
completion.	completion.
The default value is @samp{off}.	The default value is @samp{off}.

	@item vi-cmd-mode-string
	@vindex vi-cmd-mode-string
	If the @var{show-mode-in-prompt} variable is enabled,
	this string is displayed immediately before the last line of the primary
	prompt when vi editing mode is active and in command mode.
	The value is expanded like a
	key binding, so the standard set of meta- and control prefixes and
	backslash escape sequences is available.
	Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of
	non-printing characters, which can be used to embed a terminal control
	sequence into the mode string.
	The default is @samp{(cmd)}.

	@item vi-ins-mode-string
	@vindex vi-ins-mode-string
	If the @var{show-mode-in-prompt} variable is enabled,
	this string is displayed immediately before the last line of the primary
	prompt when vi editing mode is active and in insertion mode.
	The value is expanded like a
	key binding, so the standard set of meta- and control prefixes and
	backslash escape sequences is available.
	Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of
	non-printing characters, which can be used to embed a terminal control
	sequence into the mode string.
	The default is @samp{(ins)}.

@item visible-stats	@item visible-stats
@vindex visible-stats	@vindex visible-stats
If set to @samp{on}, a character denoting a file's type	If set to @samp{on}, a character denoting a file's type
Line 733 Meta-Rubout: backward-kill-word	Line 810 Meta-Rubout: backward-kill-word
Control-o: "> output"	Control-o: "> output"
@end example	@end example

In the above example, @kbd{C-u} is bound to the function	In the example above, @kbd{C-u} is bound to the function
@code{universal-argument},	@code{universal-argument},
@kbd{M-DEL} is bound to the function @code{backward-kill-word}, and	@kbd{M-DEL} is bound to the function @code{backward-kill-word}, and
@kbd{C-o} is bound to run the macro	@kbd{C-o} is bound to run the macro
Line 848 of tests. There are four parser directives used.	Line 925 of tests. There are four parser directives used.
@item $if	@item $if
The @code{$if} construct allows bindings to be made based on the	The @code{$if} construct allows bindings to be made based on the
editing mode, the terminal being used, or the application using	editing mode, the terminal being used, or the application using
Readline. The text of the test extends to the end of the line;	Readline. The text of the test, after any comparison operator,
no characters are required to isolate it.	extends to the end of the line;
	unless otherwise noted, no characters are required to isolate it.

@table @code	@table @code
@item mode	@item mode
Line 869 the portion of the terminal name before the first @sam	Line 947 the portion of the terminal name before the first @sam
allows @code{sun} to match both @code{sun} and @code{sun-cmd},	allows @code{sun} to match both @code{sun} and @code{sun-cmd},
for instance.	for instance.

	@item version
	The @code{version} test may be used to perform comparisons against
	specific Readline versions.
	The @code{version} expands to the current Readline version.
	The set of comparison operators includes
	@samp{=} (and @samp{==}), @samp{!=}, @samp{<=}, @samp{>=}, @samp{<},
	and @samp{>}.
	The version number supplied on the right side of the operator consists
	of a major version number, an optional decimal point, and an optional
	minor version (e.g., @samp{7.1}). If the minor version is omitted, it
	is assumed to be @samp{0}.
	The operator may be separated from the string @code{version} and
	from the version number argument by whitespace.
	The following example sets a variable if the Readline version being used
	is 7.0 or newer:
	@example
	$if version >= 7.0
	set show-mode-in-prompt on
	$endif
	@end example

@item application	@item application
The @var{application} construct is used to include	The @var{application} construct is used to include
application-specific settings. Each program using the Readline	application-specific settings. Each program using the Readline
Line 883 $if Bash	Line 982 $if Bash
"\C-xq": "\eb\"\ef\""	"\C-xq": "\eb\"\ef\""
$endif	$endif
@end example	@end example

	@item variable
	The @var{variable} construct provides simple equality tests for Readline
	variables and values.
	The permitted comparison operators are @samp{=}, @samp{==}, and @samp{!=}.
	The variable name must be separated from the comparison operator by
	whitespace; the operator may be separated from the value on the right hand
	side by whitespace.
	Both string and boolean variables may be tested. Boolean variables must be
	tested against the values @var{on} and @var{off}.
	The following example is equivalent to the @code{mode=emacs} test described
	above:
	@example
	$if editing-mode == emacs
	set show-mode-in-prompt on
	$endif
	@end example
@end table	@end table

@item $endif	@item $endif
Line 999 set convert-meta off	Line 1115 set convert-meta off
# rather than as meta-prefixed characters	# rather than as meta-prefixed characters
set output-meta on	set output-meta on

# if there are more than 150 possible completions for	# if there are 150 or more possible completions for a word,
# a word, ask the user if he wants to see all of them	# ask whether or not the user wants to see all of them
set completion-query-items 150	set completion-query-items 150

# For FTP	# For FTP
Line 1063 Move back to the start of the current or previous word	Line 1179 Move back to the start of the current or previous word
Words are composed of letters and digits.	Words are composed of letters and digits.

@ifset BashFeatures	@ifset BashFeatures
@item shell-forward-word ()	@item shell-forward-word (M-C-f)
Move forward to the end of the next word.	Move forward to the end of the next word.
Words are delimited by non-quoted shell metacharacters.	Words are delimited by non-quoted shell metacharacters.

@item shell-backward-word ()	@item shell-backward-word (M-C-b)
Move back to the start of the current or previous word.	Move back to the start of the current or previous word.
Words are delimited by non-quoted shell metacharacters.	Words are delimited by non-quoted shell metacharacters.
@end ifset	@end ifset

	@item previous-screen-line ()
	Attempt to move point to the same physical screen column on the previous
	physical screen line. This will not have the desired effect if the current
	Readline line does not take up more than one physical line or if point is not
	greater than the length of the prompt plus the screen width.

	@item next-screen-line ()
	Attempt to move point to the same physical screen column on the next
	physical screen line. This will not have the desired effect if the current
	Readline line does not take up more than one physical line or if the length
	of the current Readline line is not greater than the length of the prompt
	plus the screen width.

	@item clear-display (M-C-l)
	Clear the screen and, if possible, the terminal's scrollback buffer,
	then redraw the current line,
	leaving the current line at the top of the screen.

@item clear-screen (C-l)	@item clear-screen (C-l)
Clear the screen and redraw the current line,	Clear the screen,
	then redraw the current line,
leaving the current line at the top of the screen.	leaving the current line at the top of the screen.

@item redraw-current-line ()	@item redraw-current-line ()
Line 1119 being entered.	Line 1254 being entered.
@item reverse-search-history (C-r)	@item reverse-search-history (C-r)
Search backward starting at the current line and moving `up' through	Search backward starting at the current line and moving `up' through
the history as necessary. This is an incremental search.	the history as necessary. This is an incremental search.
	This command sets the region to the matched text and activates the mark.

@item forward-search-history (C-s)	@item forward-search-history (C-s)
Search forward starting at the current line and moving `down' through	Search forward starting at the current line and moving `down' through
the the history as necessary. This is an incremental search.	the history as necessary. This is an incremental search.
	This command sets the region to the matched text and activates the mark.

@item non-incremental-reverse-search-history (M-p)	@item non-incremental-reverse-search-history (M-p)
Search backward starting at the current line and moving `up'	Search backward starting at the current line and moving `up'
through the history as necessary using a non-incremental search	through the history as necessary using a non-incremental search
for a string supplied by the user.	for a string supplied by the user.
	The search string may match anywhere in a history line.

@item non-incremental-forward-search-history (M-n)	@item non-incremental-forward-search-history (M-n)
Search forward starting at the current line and moving `down'	Search forward starting at the current line and moving `down'
through the the history as necessary using a non-incremental search	through the history as necessary using a non-incremental search
for a string supplied by the user.	for a string supplied by the user.
	The search string may match anywhere in a history line.

@item history-search-forward ()	@item history-search-forward ()
Search forward through the history for the string of characters	Search forward through the history for the string of characters
Line 1148 The search string must match at the beginning of a his	Line 1287 The search string must match at the beginning of a his
This is a non-incremental search.	This is a non-incremental search.
By default, this command is unbound.	By default, this command is unbound.

@item history-substr-search-forward ()	@item history-substring-search-forward ()
Search forward through the history for the string of characters	Search forward through the history for the string of characters
between the start of the current line and the point.	between the start of the current line and the point.
The search string may match anywhere in a history line.	The search string may match anywhere in a history line.
This is a non-incremental search.	This is a non-incremental search.
By default, this command is unbound.	By default, this command is unbound.

@item history-substr-search-backward ()	@item history-substring-search-backward ()
Search backward through the history for the string of characters	Search backward through the history for the string of characters
between the start of the current line and the point.	between the start of the current line and the point.
The search string may match anywhere in a history line.	The search string may match anywhere in a history line.
Line 1185 the direction through the history (back or forward).	Line 1324 the direction through the history (back or forward).
The history expansion facilities are used to extract the last argument,	The history expansion facilities are used to extract the last argument,
as if the @samp{!$} history expansion had been specified.	as if the @samp{!$} history expansion had been specified.

	@item operate-and-get-next (C-o)
	Accept the current line for return to the calling application as if a
	newline had been entered,
	and fetch the next line relative to the current line from the history
	for editing.
	A numeric argument, if supplied, specifies the history entry to use instead
	of the current line.

@end ftable	@end ftable

@node Commands For Text	@node Commands For Text
Line 1224 Insert a tab character.	Line 1371 Insert a tab character.
@item self-insert (a, b, A, 1, !, @dots{})	@item self-insert (a, b, A, 1, !, @dots{})
Insert yourself.	Insert yourself.

	@item bracketed-paste-begin ()
	This function is intended to be bound to the "bracketed paste" escape
	sequence sent by some terminals, and such a binding is assigned by default.
	It allows Readline to insert the pasted text as a single unit without treating
	each character as if it had been read from the keyboard. The characters
	are inserted as if each one was bound to @code{self-insert} instead of
	executing any editing commands.

	Bracketed paste sets the region (the characters between point and the mark)
	to the inserted text. It uses the concept of an @emph{active mark}: when the
	mark is active, Readline redisplay uses the terminal's standout mode to
	denote the region.

@item transpose-chars (C-t)	@item transpose-chars (C-t)
Drag the character before the cursor forward over	Drag the character before the cursor forward over
the character at the cursor, moving the	the character at the cursor, moving the
Line 1273 By default, this command is unbound.	Line 1433 By default, this command is unbound.

@item kill-line (C-k)	@item kill-line (C-k)
Kill the text from point to the end of the line.	Kill the text from point to the end of the line.
	With a negative numeric argument, kill backward from the cursor to the
	beginning of the current line.

@item backward-kill-line (C-x Rubout)	@item backward-kill-line (C-x Rubout)
Kill backward to the beginning of the line.	Kill backward from the cursor to the beginning of the current line.
	With a negative numeric argument, kill forward from the cursor to the
	end of the current line.

@item unix-line-discard (C-u)	@item unix-line-discard (C-u)
Kill backward from the cursor to the beginning of the current line.	Kill backward from the cursor to the beginning of the current line.
Line 1294 Kill the word behind point.	Line 1458 Kill the word behind point.
Word boundaries are the same as @code{backward-word}.	Word boundaries are the same as @code{backward-word}.

@ifset BashFeatures	@ifset BashFeatures
@item shell-kill-word ()	@item shell-kill-word (M-C-d)
Kill from point to the end of the current word, or if between	Kill from point to the end of the current word, or if between
words, to the end of the next word.	words, to the end of the next word.
Word boundaries are the same as @code{shell-forward-word}.	Word boundaries are the same as @code{shell-forward-word}.
Line 1304 Kill the word behind point.	Line 1468 Kill the word behind point.
Word boundaries are the same as @code{shell-backward-word}.	Word boundaries are the same as @code{shell-backward-word}.
@end ifset	@end ifset

	@item shell-transpose-words (M-C-t)
	Drag the word before point past the word after point,
	moving point past that word as well.
	If the insertion point is at the end of the line, this transposes
	the last two words on the line.
	Word boundaries are the same as @code{shell-forward-word} and
	@code{shell-backward-word}.

@item unix-word-rubout (C-w)	@item unix-word-rubout (C-w)
Kill the word behind point, using white space as a word boundary.	Kill the word behind point, using white space as a word boundary.
The killed text is saved on the kill-ring.	The killed text is saved on the kill-ring.
Line 1357 leading minus sign, those digits define the argument.	Line 1529 leading minus sign, those digits define the argument.
If the command is followed by digits, executing @code{universal-argument}	If the command is followed by digits, executing @code{universal-argument}
again ends the numeric argument, but is otherwise ignored.	again ends the numeric argument, but is otherwise ignored.
As a special case, if this command is immediately followed by a	As a special case, if this command is immediately followed by a
character that is neither a digit or minus sign, the argument count	character that is neither a digit nor minus sign, the argument count
for the next command is multiplied by four.	for the next command is multiplied by four.
The argument count is initially one, so executing this function the	The argument count is initially one, so executing this function the
first time makes the argument count four, a second time makes the	first time makes the argument count four, a second time makes the
Line 1514 Abort the current editing command and	Line 1686 Abort the current editing command and
ring the terminal's bell (subject to the setting of	ring the terminal's bell (subject to the setting of
@code{bell-style}).	@code{bell-style}).

@item do-uppercase-version (M-a, M-b, M-@var{x}, @dots{})	@item do-lowercase-version (M-A, M-B, M-@var{x}, @dots{})
If the metafied character @var{x} is lowercase, run the command	If the metafied character @var{x} is upper case, run the command
that is bound to the corresponding uppercase character.	that is bound to the corresponding metafied lower case character.
	The behavior is undefined if @var{x} is already lower case.

@item prefix-meta (@key{ESC})	@item prefix-meta (@key{ESC})
Metafy the next character typed. This is for keyboards	Metafy the next character typed. This is for keyboards
Line 1640 Perform history and alias expansion on the current lin	Line 1813 Perform history and alias expansion on the current lin
@item insert-last-argument (M-. or M-_)	@item insert-last-argument (M-. or M-_)
A synonym for @code{yank-last-arg}.	A synonym for @code{yank-last-arg}.

@item operate-and-get-next (C-o)	@item edit-and-execute-command (C-x C-e)
Accept the current line for execution and fetch the next line
relative to the current line from the history for editing. Any
argument is ignored.

@item edit-and-execute-command (C-xC-e)
Invoke an editor on the current command line, and execute the result as shell	Invoke an editor on the current command line, and execute the result as shell
commands.	commands.
Bash attempts to invoke	Bash attempts to invoke
Line 1716 If no compspec is found for the full pathname, an atte	Line 1884 If no compspec is found for the full pathname, an atte
find a compspec for the portion following the final slash.	find a compspec for the portion following the final slash.
If those searches do not result in a compspec, any compspec defined with	If those searches do not result in a compspec, any compspec defined with
the @option{-D} option to @code{complete} is used as the default.	the @option{-D} option to @code{complete} is used as the default.
	If there is no default compspec, Bash attempts alias expansion
	on the command word as a final resort, and attempts to find a compspec
	for the command word from any successful expansion

Once a compspec has been found, it is used to generate the list of	Once a compspec has been found, it is used to generate the list of
matching words.	matching words.
Line 1740 Next, the string specified as the argument to the @opt	Line 1911 Next, the string specified as the argument to the @opt
is considered.	is considered.
The string is first split using the characters in the @env{IFS}	The string is first split using the characters in the @env{IFS}
special variable as delimiters.	special variable as delimiters.
Shell quoting is honored.	Shell quoting is honored within the string, in order to provide a
	mechanism for the words to contain shell metacharacters or characters
	in the value of @env{IFS}.
Each word is then expanded using	Each word is then expanded using
brace expansion, tilde expansion, parameter and variable expansion,	brace expansion, tilde expansion, parameter and variable expansion,
command substitution, and arithmetic expansion,	command substitution, and arithmetic expansion,
Line 1788 is removed before attempting a match.	Line 1961 is removed before attempting a match.
Any completion that matches the pattern will be removed from the list.	Any completion that matches the pattern will be removed from the list.
A leading @samp{!} negates the pattern; in this case any completion	A leading @samp{!} negates the pattern; in this case any completion
not matching the pattern will be removed.	not matching the pattern will be removed.
	If the @code{nocasematch} shell option
	(see the description of @code{shopt} in @ref{The Shopt Builtin})
	is enabled, the match is performed without regard to the case
	of alphabetic characters.

Finally, any prefix and suffix specified with the @option{-P} and @option{-S}	Finally, any prefix and suffix specified with the @option{-P} and @option{-S}
options are added to each member of the completion list, and the result is	options are added to each member of the completion list, and the result is
Line 1880 matches were generated.	Line 2057 matches were generated.
@item complete	@item complete
@btindex complete	@btindex complete
@example	@example
@code{complete [-abcdefgjksuv] [-o @var{comp-option}] [-DE] [-A @var{action}] [-G @var{globpat}] [-W @var{wordlist}]	@code{complete [-abcdefgjksuv] [-o @var{comp-option}] [-DEI] [-A @var{action}] [-G @var{globpat}]
[-F @var{function}] [-C @var{command}] [-X @var{filterpat}]	[-W @var{wordlist}] [-F @var{function}] [-C @var{command}] [-X @var{filterpat}]
[-P @var{prefix}] [-S @var{suffix}] @var{name} [@var{name} @dots{}]}	[-P @var{prefix}] [-S @var{suffix}] @var{name} [@var{name} @dots{}]}
@code{complete -pr [-DE] [@var{name} @dots{}]}	@code{complete -pr [-DEI] [@var{name} @dots{}]}
@end example	@end example

Specify how arguments to each @var{name} should be completed.	Specify how arguments to each @var{name} should be completed.
Line 1893 reused as input.	Line 2070 reused as input.
The @option{-r} option removes a completion specification for	The @option{-r} option removes a completion specification for
each @var{name}, or, if no @var{name}s are supplied, all	each @var{name}, or, if no @var{name}s are supplied, all
completion specifications.	completion specifications.
The @option{-D} option indicates that the remaining options and actions should	The @option{-D} option indicates that other supplied options and actions should
apply to the ``default'' command completion; that is, completion attempted	apply to the ``default'' command completion; that is, completion attempted
on a command for which no completion has previously been defined.	on a command for which no completion has previously been defined.
The @option{-E} option indicates that the remaining options and actions should	The @option{-E} option indicates that other supplied options and actions should
apply to ``empty'' command completion; that is, completion attempted on a	apply to ``empty'' command completion; that is, completion attempted on a
blank line.	blank line.
	The @option{-I} option indicates that other supplied options and actions should
	apply to completion on the initial non-assignment word on the line, or after a
	command delimiter such as @samp{;} or @samp{\|}, which is usually command
	name completion.
	If multiple options are supplied, the @option{-D} option takes precedence
	over @option{-E}, and both take precedence over @option{-I}.
	If any of @option{-D}, @option{-E}, or @option{-I} are supplied, any other
	@var{name} arguments are ignored; these completions only apply to the case
	specified by the option.

The process of applying these completion specifications when word completion	The process of applying these completion specifications when word completion
is attempted is described above (@pxref{Programmable Completion}). The	is attempted is described above (@pxref{Programmable Completion}).
@option{-D} option takes precedence over @option{-E}.

Other options, if specified, have the following meanings.	Other options, if specified, have the following meanings.
The arguments to the @option{-G}, @option{-W}, and @option{-X} options	The arguments to the @option{-G}, @option{-W}, and @option{-X} options
Line 1932 Perform directory name completion if the compspec gene	Line 2117 Perform directory name completion if the compspec gene

@item filenames	@item filenames
Tell Readline that the compspec generates filenames, so it can perform any	Tell Readline that the compspec generates filenames, so it can perform any
filename-specific processing (like adding a slash to directory names	filename-specific processing (like adding a slash to directory names,
quoting special characters, or suppressing trailing spaces).	quoting special characters, or suppressing trailing spaces).
This option is intended to be used with shell functions specified	This option is intended to be used with shell functions specified
with @option{-F}.	with @option{-F}.
Line 1941 with @option{-F}.	Line 2126 with @option{-F}.
Tell Readline not to quote the completed words if they are filenames	Tell Readline not to quote the completed words if they are filenames
(quoting filenames is the default).	(quoting filenames is the default).

	@item nosort
	Tell Readline not to sort the list of possible completions alphabetically.

@item nospace	@item nospace
Tell Readline not to append a space (the default) to words completed at	Tell Readline not to append a space (the default) to words completed at
the end of the line.	the end of the line.
Line 2084 an error occurs adding a completion specification.	Line 2272 an error occurs adding a completion specification.
@item compopt	@item compopt
@btindex compopt	@btindex compopt
@example	@example
@code{compopt} [-o @var{option}] [-DE] [+o @var{option}] [@var{name}]	@code{compopt} [-o @var{option}] [-DEI] [+o @var{option}] [@var{name}]
@end example	@end example
Modify completion options for each @var{name} according to the	Modify completion options for each @var{name} according to the
@var{option}s, or for the currently-executing completion if no @var{name}s	@var{option}s, or for the currently-executing completion if no @var{name}s
Line 2093 If no @var{option}s are given, display the completion	Line 2281 If no @var{option}s are given, display the completion
@var{name} or the current completion.	@var{name} or the current completion.
The possible values of @var{option} are those valid for the @code{complete}	The possible values of @var{option} are those valid for the @code{complete}
builtin described above.	builtin described above.
The @option{-D} option indicates that the remaining options should	The @option{-D} option indicates that other supplied options should
apply to the ``default'' command completion; that is, completion attempted	apply to the ``default'' command completion; that is, completion attempted
on a command for which no completion has previously been defined.	on a command for which no completion has previously been defined.
The @option{-E} option indicates that the remaining options should	The @option{-E} option indicates that other supplied options should
apply to ``empty'' command completion; that is, completion attempted on a	apply to ``empty'' command completion; that is, completion attempted on a
blank line.	blank line.
	The @option{-I} option indicates that other supplied options should
	apply to completion on the initial non-assignment word on the line, or after a
	command delimiter such as @samp{;} or @samp{\|}, which is usually command
	name completion.

The @option{-D} option takes precedence over @option{-E}.	If multiple options are supplied, the @option{-D} option takes precedence
	over @option{-E}, and both take precedence over @option{-I}

The return value is true unless an invalid option is supplied, an attempt	The return value is true unless an invalid option is supplied, an attempt
is made to modify the options for a @var{name} for which no completion	is made to modify the options for a @var{name} for which no completion
Line 2117 a shell function and bind it to a particular command u	Line 2310 a shell function and bind it to a particular command u

The following function provides completions for the @code{cd} builtin.	The following function provides completions for the @code{cd} builtin.
It is a reasonably good example of what shell functions must do when	It is a reasonably good example of what shell functions must do when
used for completion. This function uses the word passsed as @code{$2}	used for completion. This function uses the word passed as @code{$2}
to determine the directory name to complete. You can also use the	to determine the directory name to complete. You can also use the
@code{COMP_WORDS} array variable; the current word is indexed by the	@code{COMP_WORDS} array variable; the current word is indexed by the
@code{COMP_CWORD} variable.	@code{COMP_CWORD} variable.
Line 2147 _comp_cd()	Line 2340 _comp_cd()
local cur _skipdot _cdpath	local cur _skipdot _cdpath
local i j k	local i j k

# Tilde expansion, with side effect of expanding tilde to full pathname	# Tilde expansion, which also expands tilde to full pathname
case "$2" in	case "$2" in
\~*) eval cur="$2" ;;	\~*) eval cur="$2" ;;
*) cur=$2 ;;	*) cur=$2 ;;
Line 2210 character to the directory name, in case we want to ap	Line 2403 character to the directory name, in case we want to ap
The @option{-o bashdefault} option brings in the rest of the "Bash default"	The @option{-o bashdefault} option brings in the rest of the "Bash default"
completions -- possible completion that Bash adds to the default Readline	completions -- possible completion that Bash adds to the default Readline
set. These include things like command name completion, variable completion	set. These include things like command name completion, variable completion
for words beginning with @samp{@{}, completions containing pathname	for words beginning with @samp{$} or @samp{$@{}, completions containing pathname
expansion patterns (@pxref{Filename Expansion}), and so on.	expansion patterns (@pxref{Filename Expansion}), and so on.

Once installed using @code{complete}, @code{_comp_cd} will be called every	Once installed using @code{complete}, @code{_comp_cd} will be called every
Line 2220 Many more examples -- an extensive collection of compl	Line 2413 Many more examples -- an extensive collection of compl
the common GNU, Unix, and Linux commands -- are available as part of the	the common GNU, Unix, and Linux commands -- are available as part of the
bash_completion project. This is installed by default on many GNU/Linux	bash_completion project. This is installed by default on many GNU/Linux
distributions. Originally written by Ian Macdonald, the project now lives	distributions. Originally written by Ian Macdonald, the project now lives
at @url{http://bash-completion.alioth.debian.org/}. There are ports for	at @url{https://github.com/scop/bash-completion/}. There are ports for
other systems such as Solaris and Mac OS X.	other systems such as Solaris and Mac OS X.

An older version of the bash_completion package is distributed with bash	An older version of the bash_completion package is distributed with bash

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.1.1.1
changed lines
	Added in v.1.1.1.2