--- embedaddon/readline/doc/rluserman.html 2014/07/30 08:16:46 1.1.1.1 +++ embedaddon/readline/doc/rluserman.html 2021/03/17 01:01:01 1.1.1.2 @@ -1,6 +1,6 @@ - +
- +
beginning-of-line (C-a) -
+
Move to the start of the current line.

- +

end-of-line (C-e) -
+
Move to the end of the line.

- +

forward-char (C-f) -
+
Move forward a character.

- +

backward-char (C-b) -
+
Move back a character.

- +

forward-word (M-f) -
+
Move forward to the end of the next word. Words are composed of letters and digits.

- +

backward-word (M-b) -
+
Move back to the start of the current or previous word. Words are composed of letters and digits.

- + +

previous-screen-line () +
+Attempt to move point to the same physical screen column on the previous +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if point is not +greater than the length of the prompt plus the screen width. +

+ + +

next-screen-line () +
+Attempt to move point to the same physical screen column on the next +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if the length +of the current Readline line is not greater than the length of the prompt +plus the screen width. +

+ + +

clear-display (M-C-l) +
+Clear the screen and, if possible, the terminal's scrollback buffer, +then redraw the current line, +leaving the current line at the top of the screen. +

+ +

clear-screen (C-l) -
-Clear the screen and redraw the current line, +
+Clear the screen, +then redraw the current line, leaving the current line at the top of the screen.

- +

redraw-current-line () -
+
Refresh the current line. By default, this is unbound.

@@ -1381,9 +1524,9 @@ Refresh the current line. By default, this is unbound

- +
accept-line (Newline or Return) -
+
Accept the line regardless of where the cursor is. If this line is non-empty, it may be added to the history list for future recall with @@ -1392,64 +1535,68 @@ If this line is a modified history line, the history l to its original state.

- +

previous-history (C-p) -
+
Move `back' through the history list, fetching the previous command.

- +

next-history (C-n) -
+
Move `forward' through the history list, fetching the next command.

- +

beginning-of-history (M-<) -
+
Move to the first line in the history.

- +

end-of-history (M->) -
+
Move to the end of the input history, i.e., the line currently being entered.

- +

reverse-search-history (C-r) -
+
Search backward starting at the current line and moving `up' through the history as necessary. This is an incremental search. +This command sets the region to the matched text and activates the mark.

- +

forward-search-history (C-s) -
+
Search forward starting at the current line and moving `down' through -the the history as necessary. This is an incremental search. +the history as necessary. This is an incremental search. +This command sets the region to the matched text and activates the mark.

- +

non-incremental-reverse-search-history (M-p) -
+
Search backward starting at the current line and moving `up' through the history as necessary using a non-incremental search for a string supplied by the user. +The search string may match anywhere in a history line.

- +

non-incremental-forward-search-history (M-n) -
+
Search forward starting at the current line and moving `down' -through the the history as necessary using a non-incremental search +through the history as necessary using a non-incremental search for a string supplied by the user. +The search string may match anywhere in a history line.

- +

history-search-forward () -
+
Search forward through the history for the string of characters between the start of the current line and the point. The search string must match at the beginning of a history line. @@ -1457,9 +1604,9 @@ This is a non-incremental search. By default, this command is unbound.

- +

history-search-backward () -
+
Search backward through the history for the string of characters between the start of the current line and the point. The search string must match at the beginning of a history line. @@ -1467,9 +1614,9 @@ This is a non-incremental search. By default, this command is unbound.

- -

history-substr-search-forward () -
+ +
history-substring-search-forward () +
Search forward through the history for the string of characters between the start of the current line and the point. The search string may match anywhere in a history line. @@ -1477,9 +1624,9 @@ This is a non-incremental search. By default, this command is unbound.

- -

history-substr-search-backward () -
+ +
history-substring-search-backward () +
Search backward through the history for the string of characters between the start of the current line and the point. The search string may match anywhere in a history line. @@ -1487,9 +1634,9 @@ This is a non-incremental search. By default, this command is unbound.

- +

yank-nth-arg (M-C-y) -
+
Insert the first argument to the previous command (usually the second word on the previous line) at point. With an argument n, @@ -1500,9 +1647,9 @@ Once the argument n is computed, the argume as if the `!n' history expansion had been specified.

- +

yank-last-arg (M-. or M-_) -
+
Insert last argument to the previous command (the last word of the previous history entry). With a numeric argument, behave exactly like yank-nth-arg. @@ -1516,6 +1663,17 @@ The history expansion facilities are used to extract t as if the `!$' history expansion had been specified.

+ +

operate-and-get-next (C-o) +
+Accept the current line for return to the calling application as if a +newline had been entered, +and fetch the next line relative to the current line from the history +for editing. +A numeric argument, if supplied, specifies the history entry to use instead +of the current line. +

+

@@ -1539,60 +1697,77 @@ as if the `!$' history expansion had been

- +
end-of-file (usually C-d) -
+
The character indicating end-of-file as set, for example, by stty. If this character is read when there are no characters on the line, and point is at the beginning of the line, Readline interprets it as the end of input and returns EOF.

- +

delete-char (C-d) -
+
Delete the character at point. If this function is bound to the same character as the tty EOF character, as C-d commonly is, see above for the effects.

- +

backward-delete-char (Rubout) -
+
Delete the character behind the cursor. A numeric argument means to kill the characters instead of deleting them.

- +

forward-backward-delete-char () -
+
Delete the character under the cursor, unless the cursor is at the end of the line, in which case the character behind the cursor is deleted. By default, this is not bound to a key.

- +

quoted-insert (C-q or C-v) -
+
Add the next character typed to the line verbatim. This is how to insert key sequences like C-q, for example.

- +

tab-insert (M-TAB) -
+
Insert a tab character.

- +

self-insert (a, b, A, 1, !, ...) -
+
Insert yourself.

- + +

bracketed-paste-begin () +
+This function is intended to be bound to the "bracketed paste" escape +sequence sent by some terminals, and such a binding is assigned by default. +It allows Readline to insert the pasted text as a single unit without treating +each character as if it had been read from the keyboard. The characters +are inserted as if each one was bound to self-insert instead of +executing any editing commands. +

+ +Bracketed paste sets the region (the characters between point and the mark) +to the inserted text. It uses the concept of an active mark: when the +mark is active, Readline redisplay uses the terminal's standout mode to +denote the region. +

+ +

transpose-chars (C-t) -
+
Drag the character before the cursor forward over the character at the cursor, moving the cursor forward as well. If the insertion point @@ -1601,39 +1776,39 @@ transposes the last two characters of the line. Negative arguments have no effect.

- +

transpose-words (M-t) -
+
Drag the word before point past the word after point, moving point past that word as well. If the insertion point is at the end of the line, this transposes the last two words on the line.

- +

upcase-word (M-u) -
+
Uppercase the current (or following) word. With a negative argument, uppercase the previous word, but do not move the cursor.

- +

downcase-word (M-l) -
+
Lowercase the current (or following) word. With a negative argument, lowercase the previous word, but do not move the cursor.

- +

capitalize-word (M-c) -
+
Capitalize the current (or following) word. With a negative argument, capitalize the previous word, but do not move the cursor.

- +

overwrite-mode () -
+
Toggle overwrite mode. With an explicit positive numeric argument, switches to overwrite mode. With an explicit non-positive numeric argument, switches to insert mode. This command affects only @@ -1673,106 +1848,121 @@ By default, this command is unbound.
- +
kill-line (C-k) -
+
Kill the text from point to the end of the line. +With a negative numeric argument, kill backward from the cursor to the +beginning of the current line.

- +

backward-kill-line (C-x Rubout) -
-Kill backward to the beginning of the line. +
+Kill backward from the cursor to the beginning of the current line. +With a negative numeric argument, kill forward from the cursor to the +end of the current line.

- +

unix-line-discard (C-u) -
+
Kill backward from the cursor to the beginning of the current line.

- +

kill-whole-line () -
+
Kill all characters on the current line, no matter where point is. By default, this is unbound.

- +

kill-word (M-d) -
+
Kill from point to the end of the current word, or if between words, to the end of the next word. Word boundaries are the same as forward-word.

- +

backward-kill-word (M-DEL) -
+
Kill the word behind point. Word boundaries are the same as backward-word.

- + +

shell-transpose-words (M-C-t) +
+Drag the word before point past the word after point, +moving point past that word as well. +If the insertion point is at the end of the line, this transposes +the last two words on the line. +Word boundaries are the same as shell-forward-word and +shell-backward-word. +

+ +

unix-word-rubout (C-w) -
+
Kill the word behind point, using white space as a word boundary. The killed text is saved on the kill-ring.

- +

unix-filename-rubout () -
+
Kill the word behind point, using white space and the slash character as the word boundaries. The killed text is saved on the kill-ring.

- +

delete-horizontal-space () -
+
Delete all spaces and tabs around point. By default, this is unbound.

- +

kill-region () -
+
Kill the text in the current region. By default, this command is unbound.

- +

copy-region-as-kill () -
+
Copy the text in the region to the kill buffer, so it can be yanked right away. By default, this command is unbound.

- +

copy-backward-word () -
+
Copy the word before point to the kill buffer. The word boundaries are the same as backward-word. By default, this command is unbound.

- +

copy-forward-word () -
+
Copy the word following point to the kill buffer. The word boundaries are the same as forward-word. By default, this command is unbound.

- +

yank (C-y) -
+
Yank the top of the kill ring into the buffer at point.

- +

yank-pop (M-y) -
+
Rotate the kill-ring, and yank the new top. You can only do this if the prior command is yank or yank-pop.
@@ -1796,23 +1986,23 @@ the prior command is yank or yank-p
- +
digit-argument (M-0, M-1, ... M--) -
+
Add this digit to the argument already accumulating, or start a new argument. M-- starts a negative argument.

- +

universal-argument () -
+
This is another way to specify an argument. If this command is followed by one or more digits, optionally with a leading minus sign, those digits define the argument. If the command is followed by digits, executing universal-argument again ends the numeric argument, but is otherwise ignored. As a special case, if this command is immediately followed by a -character that is neither a digit or minus sign, the argument count +character that is neither a digit nor minus sign, the argument count for the next command is multiplied by four. The argument count is initially one, so executing this function the first time makes the argument count four, a second time makes the @@ -1840,33 +2030,33 @@ By default, this is not bound to a key.

- +
complete (TAB) -
+
Attempt to perform completion on the text before point. The actual completion performed is application-specific. The default is filename completion.

- +

possible-completions (M-?) -
+
List the possible completions of the text before point. When displaying completions, Readline sets the number of columns used for display to the value of completion-display-width, the value of the environment variable COLUMNS, or the screen width, in that order.

- +

insert-completions (M-*) -
+
Insert all completions of the text before point that would have been generated by possible-completions.

- +

menu-complete () -
+
Similar to complete, but replaces the word to be completed with a single match from the list of possible completions. Repeated execution of menu-complete steps through the list @@ -1881,17 +2071,17 @@ This command is intended to be bound to TAB by default.

- +

menu-complete-backward () -
+
Identical to menu-complete, but moves backward through the list of possible completions, as if menu-complete had been given a negative argument.

- +

delete-char-or-list () -
+
Deletes the character under the cursor if not at the beginning or end of the line (like delete-char). If at the end of the line, behaves identically to @@ -1920,29 +2110,29 @@ This command is unbound by default.
- +
start-kbd-macro (C-x () -
+
Begin saving the characters typed into the current keyboard macro.

- +

end-kbd-macro (C-x )) -
+
Stop saving the characters typed into the current keyboard macro and save the definition.

- +

call-last-kbd-macro (C-x e) -
+
Re-execute the last keyboard macro defined, by making the characters in the macro appear as if typed at the keyboard.

- +

print-last-kbd-macro () -
+
Print the last keboard macro defined in a format suitable for the inputrc file.

@@ -1968,87 +2158,88 @@ Print the last keboard macro defined in a format suita

- +
re-read-init-file (C-x C-r) -
+
Read in the contents of the inputrc file, and incorporate any bindings or variable assignments found there.

- +

abort (C-g) -
+
Abort the current editing command and ring the terminal's bell (subject to the setting of bell-style).

- -

do-uppercase-version (M-a, M-b, M-x, ...) -
-If the metafied character x is lowercase, run the command -that is bound to the corresponding uppercase character. + +
do-lowercase-version (M-A, M-B, M-x, ...) +
+If the metafied character x is upper case, run the command +that is bound to the corresponding metafied lower case character. +The behavior is undefined if x is already lower case.

- +

prefix-meta (ESC) -
+
Metafy the next character typed. This is for keyboards without a meta key. Typing `ESC f' is equivalent to typing M-f.

- +

undo (C-_ or C-x C-u) -
+
Incremental undo, separately remembered for each line.

- +

revert-line (M-r) -
+
Undo all changes made to this line. This is like executing the undo command enough times to get back to the beginning.

- +

tilde-expand (M-~) -
+
Perform tilde expansion on the current word.

- +

set-mark (C-@) -
+
Set the mark to the point. If a numeric argument is supplied, the mark is set to that position.

- +

exchange-point-and-mark (C-x C-x) -
+
Swap the point with the mark. The current cursor position is set to the saved position, and the old cursor position is saved as the mark.

- +

character-search (C-]) -
+
A character is read and point is moved to the next occurrence of that character. A negative count searches for previous occurrences.

- +

character-search-backward (M-C-]) -
+
A character is read and point is moved to the previous occurrence of that character. A negative count searches for subsequent occurrences.

- +

skip-csi-sequence () -
+
Read enough characters to consume a multi-key sequence such as those defined for keys like Home and End. Such sequences begin with a Control Sequence Indicator (CSI), usually ESC-[. If this sequence is @@ -2058,9 +2249,9 @@ stray characters into the editing buffer. This is unb but usually bound to ESC-[.

- +

insert-comment (M-#) -
+
Without a numeric argument, the value of the comment-begin variable is inserted at the beginning of the current line. If a numeric argument is supplied, this command acts as a toggle: if @@ -2071,43 +2262,43 @@ the line. In either case, the line is accepted as if a newline had been typed.

- +

dump-functions () -
+
Print all of the functions and their key bindings to the Readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.

- +

dump-variables () -
+
Print all of the settable variables and their values to the Readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.

- +

dump-macros () -
+
Print all of the Readline key sequences bound to macros and the strings they output. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.

- +

emacs-editing-mode (C-e) -
+
When in vi command mode, this causes a switch to emacs editing mode.

- +

vi-editing-mode (M-C-j) -
+
When in emacs editing mode, this causes a switch to vi editing mode.

@@ -2834,7 +3025,7 @@ to permit their use in free software. [ ? ]

About this document

-This document was generated by Chet Ramey on February, 11 2014 +This document was generated by Chet Ramey on October, 30 2020 using texi2html

@@ -2996,7 +3187,7 @@ the following structure:
This document was generated -by Chet Ramey on February, 11 2014 +by Chet Ramey on October, 30 2020 using texi2html