1: # Makefile for rsync. This is processed by configure to produce the final
2: # Makefile
3:
4: prefix=@prefix@
5: datarootdir=@datarootdir@
6: exec_prefix=@exec_prefix@
7: stunnel4=@STUNNEL4@
8: bindir=@bindir@
9: mandir=@mandir@
10:
11: LIBS=@LIBS@
12: CC=@CC@
13: CFLAGS=@CFLAGS@
14: CPPFLAGS=@CPPFLAGS@
15: EXEEXT=@EXEEXT@
16: LDFLAGS=@LDFLAGS@
17: LIBOBJDIR=lib/
18:
19: INSTALLCMD=@INSTALL@
20: INSTALLMAN=@INSTALL@
21:
22: srcdir=@srcdir@
23: MKDIR_P=@MKDIR_P@
24: VPATH=$(srcdir)
25: SHELL=/bin/sh
26:
27: VERSION=@RSYNC_VERSION@
28:
29: .SUFFIXES:
30: .SUFFIXES: .c .o
31:
32: GENFILES=configure.sh aclocal.m4 config.h.in proto.h proto.h-tstamp rsync.1 rsyncd.conf.5
33: HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
34: lib/pool_alloc.h
35: LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
36: lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
37: zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
38: zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
39: OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
40: util.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
41: OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
42: fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
43: OBJS3=progress.o pipe.o
44: DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
45: popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
46: popt/popthelp.o popt/poptparse.o
47: OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@
48:
49: TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
50:
51: # Programs we must have to run the test cases
52: CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
53: testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
54:
55: CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test
56:
57: # Objects for CHECK_PROGS to clean
58: CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
59:
60: # note that the -I. is needed to handle config.h when using VPATH
61: .c.o:
62: @OBJ_SAVE@
63: $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
64: @OBJ_RESTORE@
65:
66: all: Makefile rsync$(EXEEXT) rsync-ssl stunnel-rsync stunnel-rsyncd.conf @MAKE_MAN@
67:
68: install: all
69: -${MKDIR_P} ${DESTDIR}${bindir}
70: ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
71: -${MKDIR_P} ${DESTDIR}${mandir}/man1
72: -${MKDIR_P} ${DESTDIR}${mandir}/man5
73: if test -f rsync.1; then ${INSTALLMAN} -m 644 rsync.1 ${DESTDIR}${mandir}/man1; fi
74: if test -f rsyncd.conf.5; then ${INSTALLMAN} -m 644 rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
75:
76: install-ssl-client: rsync-ssl stunnel-rsync
77: -${MKDIR_P} ${DESTDIR}${bindir}
78: ${INSTALLCMD} -m 755 rsync-ssl ${DESTDIR}${bindir}
79: ${INSTALLCMD} -m 755 stunnel-rsync ${DESTDIR}${bindir}
80:
81: install-ssl-daemon: stunnel-rsyncd.conf
82: -${MKDIR_P} ${DESTDIR}/etc/stunnel
83: ${INSTALLCMD} -m 644 stunnel-rsyncd.conf ${DESTDIR}/etc/stunnel/rsyncd.conf
84: @if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
85: echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
86: fi
87:
88: install-all: install install-ssl-client install-ssl-daemon
89:
90: install-strip:
91: $(MAKE) INSTALL_STRIP='-s' install
92:
93: rsync$(EXEEXT): $(OBJS)
94: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
95:
96: $(OBJS): $(HEADERS)
97: $(CHECK_OBJS): $(HEADERS)
98:
99: flist.o: rounding.h
100:
101: rounding.h: rounding.c rsync.h
102: @for r in 0 1 3; do \
103: if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
104: echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
105: if test -f "$$HOME/build_farm/build_test.fns"; then \
106: echo "EXTRA_ROUNDING is $$r" >&2; \
107: fi; \
108: break; \
109: fi; \
110: done
111: @rm -f rounding
112: @if test -f rounding.h; then : ; else \
113: cat rounding.out 1>&2; \
114: echo "Failed to create rounding.h!" 1>&2; \
115: exit 1; \
116: fi
117: @rm -f rounding.out
118:
119: tls$(EXEEXT): $(TLS_OBJ)
120: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
121:
122: testrun$(EXEEXT): testrun.o
123: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o
124:
125: getgroups$(EXEEXT): getgroups.o
126: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
127:
128: getfsdev$(EXEEXT): getfsdev.o
129: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
130:
131: TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
132: trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
133: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
134:
135: T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
136: t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
137: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
138:
139: gen: conf proto.h man
140:
141: gensend: gen
142: rsync -aivzc $(GENFILES) $${SAMBA_HOST-samba.org}:/home/ftp/pub/rsync/generated-files/
143:
144: conf:
145: cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
146:
147: aclocal.m4: $(srcdir)/m4/*.m4
148: aclocal -I $(srcdir)/m4
149:
150: configure.sh config.h.in: configure.ac aclocal.m4
151: @if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
152: @if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
153: autoconf -o configure.sh
154: autoheader && touch config.h.in
155: @if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
156: echo "configure.sh is unchanged."; \
157: rm configure.sh.old; \
158: else \
159: echo "configure.sh has CHANGED."; \
160: fi
161: @if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
162: echo "config.h.in is unchanged."; \
163: rm config.h.in.old; \
164: else \
165: echo "config.h.in has CHANGED."; \
166: fi
167: @if test -f configure.sh.old -o -f config.h.in.old; then \
168: if test "$(MAKECMDGOALS)" = reconfigure; then \
169: echo 'Continuing with "make reconfigure".'; \
170: else \
171: echo 'You may need to run:'; \
172: echo ' make reconfigure'; \
173: exit 1; \
174: fi \
175: fi
176:
177: reconfigure: configure.sh
178: ./config.status --recheck
179: ./config.status
180:
181: Makefile: Makefile.in config.status configure.sh config.h.in
182: @if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
183: @./config.status
184: @if diff Makefile Makefile.old >/dev/null 2>&1; then \
185: echo "Makefile is unchanged."; \
186: rm Makefile.old; \
187: else \
188: if test "$(MAKECMDGOALS)" = reconfigure; then \
189: echo 'Continuing with "make reconfigure".'; \
190: else \
191: echo "Makefile updated -- rerun your make command."; \
192: exit 1; \
193: fi \
194: fi
195:
196: rsync-ssl: $(srcdir)/rsync-ssl.in Makefile
197: sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/rsync-ssl.in >rsync-ssl
198: @chmod +x rsync-ssl
199:
200: stunnel-rsync: $(srcdir)/stunnel-rsync.in Makefile
201: sed 's;\@stunnel4\@;$(stunnel4);g' <$(srcdir)/stunnel-rsync.in >stunnel-rsync
202: @chmod +x stunnel-rsync
203:
204: stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
205: sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf
206:
207: proto: proto.h-tstamp
208:
209: proto.h: proto.h-tstamp
210: @if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
211:
212: proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c config.h
213: perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
214:
215: man: rsync.1 rsyncd.conf.5 man-copy
216:
217: man-copy:
218: @-if test -f rsync.1; then :; else echo 'Copying srcdir rsync.1'; cp -p $(srcdir)/rsync.1 .; fi
219: @-if test -f rsyncd.conf.5; then :; else echo 'Copying srcdir rsyncd.conf.5'; cp -p $(srcdir)/rsyncd.conf.5 .; fi
220:
221: rsync.1: rsync.yo
222: yodl2man -o rsync.1 $(srcdir)/rsync.yo
223: -$(srcdir)/tweak_manpage rsync.1
224:
225: rsyncd.conf.5: rsyncd.conf.yo
226: yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
227: -$(srcdir)/tweak_manpage rsyncd.conf.5
228:
229: clean: cleantests
230: rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
231: rounding rounding.h *.old
232:
233: cleantests:
234: rm -rf ./testtmp*
235:
236: # We try to delete built files from both the source and build
237: # directories, just in case somebody previously configured things in
238: # the source directory.
239: distclean: clean
240: rm -f Makefile config.h config.status
241: rm -f rsync-ssl stunnel-rsync stunnel-rsyncd.conf
242: rm -f lib/dummy popt/dummy zlib/dummy
243: rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
244: rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
245: rm -f config.cache config.log
246: rm -f $(srcdir)/config.cache $(srcdir)/config.log
247: rm -f shconfig $(srcdir)/shconfig
248: rm -f $(GENFILES)
249: rm -rf autom4te.cache
250:
251: # this target is really just for my use. It only works on a limited
252: # range of machines and is used to produce a list of potentially
253: # dead (ie. unused) functions in the code. (tridge)
254: finddead:
255: nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
256: nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
257: comm -13 nmused.txt nmfns.txt
258:
259: # 'check' is the GNU name, 'test' is the name for everybody else :-)
260: .PHONY: check test
261:
262: test: check
263:
264: # There seems to be no standard way to specify some variables as
265: # exported from a Makefile apart from listing them like this.
266:
267: # This depends on building rsync; if we need any helper programs it
268: # should depend on them too.
269:
270: # We try to run the scripts with POSIX mode on, in the hope that will
271: # catch Bash-isms earlier even if we're running on GNU. Of course, we
272: # might lose in the future where POSIX diverges from old sh.
273:
274: check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
275: rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
276:
277: check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
278: rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
279:
280: check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
281: rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30
282:
283: wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
284: wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
285: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
286:
287: testsuite/chown-fake.test:
288: ln -s chown.test $(srcdir)/testsuite/chown-fake.test
289:
290: testsuite/devices-fake.test:
291: ln -s devices.test $(srcdir)/testsuite/devices-fake.test
292:
293: testsuite/xattrs-hlink.test:
294: ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test
295:
296: # This does *not* depend on building or installing: you can use it to
297: # check a version installed from a binary or some other source tree,
298: # if you want.
299:
300: installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
301: POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
302:
303: # TODO: Add 'dist' target; need to know which files will be included
304:
305: # Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
306: .PHONY: splint
307: splint:
308: splint +unixlib +gnuextensions -weak rsync.c
309:
310: doxygen:
311: cd $(srcdir) && rm dox/html/* && doxygen
312:
313: # for maintainers only
314: doxygen-upload:
315: rsync -avzv $(srcdir)/dox/html/ --delete \
316: $${SAMBA_HOST-samba.org}:/home/httpd/html/rsync/doxygen/head/
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / rsync