1: # Makefile for rsync. This is processed by configure to produce the final
2: # Makefile
3:
4: prefix=@prefix@
5: datarootdir=@datarootdir@
6: exec_prefix=@exec_prefix@
7: stunnel4=@STUNNEL4@
8: bindir=@bindir@
9: mandir=@mandir@
10:
11: LIBS=@LIBS@
12: CC=@CC@
13: CFLAGS=@CFLAGS@
14: CPPFLAGS=@CPPFLAGS@
15: EXEEXT=@EXEEXT@
16: LDFLAGS=@LDFLAGS@
17:
18: INSTALLCMD=@INSTALL@
19: INSTALLMAN=@INSTALL@
20:
21: srcdir=@srcdir@
22: MKDIR_P=@MKDIR_P@
23: VPATH=$(srcdir)
24: SHELL=/bin/sh
25:
26: VERSION=@RSYNC_VERSION@
27:
28: .SUFFIXES:
29: .SUFFIXES: .c .o
30:
31: GENFILES=configure.sh config.h.in proto.h proto.h-tstamp rsync.1 rsyncd.conf.5
32: HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
33: lib/pool_alloc.h
34: LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
35: lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
36: zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
37: zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
38: OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
39: util.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
40: OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
41: fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
42: OBJS3=progress.o pipe.o
43: DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
44: popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
45: popt/popthelp.o popt/poptparse.o
46: OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@
47:
48: TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
49:
50: # Programs we must have to run the test cases
51: CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
52: testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
53:
54: CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test
55:
56: # Objects for CHECK_PROGS to clean
57: CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
58:
59: # note that the -I. is needed to handle config.h when using VPATH
60: .c.o:
61: @OBJ_SAVE@
62: $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
63: @OBJ_RESTORE@
64:
65: all: Makefile rsync$(EXEEXT) rsync-ssl stunnel-rsync stunnel-rsyncd.conf @MAKE_MAN@
66:
67: install: all
68: -${MKDIR_P} ${DESTDIR}${bindir}
69: ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
70: -${MKDIR_P} ${DESTDIR}${mandir}/man1
71: -${MKDIR_P} ${DESTDIR}${mandir}/man5
72: if test -f rsync.1; then ${INSTALLMAN} -m 644 rsync.1 ${DESTDIR}${mandir}/man1; fi
73: if test -f rsyncd.conf.5; then ${INSTALLMAN} -m 644 rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
74:
75: install-ssl-client: rsync-ssl stunnel-rsync
76: -${MKDIR_P} ${DESTDIR}${bindir}
77: ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync-ssl ${DESTDIR}${bindir}
78: ${INSTALLCMD} ${INSTALL_STRIP} -m 755 stunnel-rsync ${DESTDIR}${bindir}
79:
80: install-ssl-daemon: stunnel-rsyncd.conf
81: -${MKDIR_P} ${DESTDIR}/etc/stunnel
82: ${INSTALLCMD} ${INSTALL_STRIP} -m 644 stunnel-rsyncd.conf ${DESTDIR}/etc/stunnel/rsyncd.conf
83: @if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
84: echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
85: fi
86:
87: install-all: install install-ssl-client install-ssl-daemon
88:
89: install-strip:
90: $(MAKE) INSTALL_STRIP='-s' install
91:
92: rsync$(EXEEXT): $(OBJS)
93: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
94:
95: $(OBJS): $(HEADERS)
96: $(CHECK_OBJS): $(HEADERS)
97:
98: flist.o: rounding.h
99:
100: rounding.h: rounding.c rsync.h
101: @for r in 0 1 3; do \
102: if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
103: echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
104: if test -f "$$HOME/build_farm/build_test.fns"; then \
105: echo "EXTRA_ROUNDING is $$r" >&2; \
106: fi; \
107: break; \
108: fi; \
109: done
110: @rm -f rounding
111: @if test -f rounding.h; then : ; else \
112: cat rounding.out 1>&2; \
113: echo "Failed to create rounding.h!" 1>&2; \
114: exit 1; \
115: fi
116: @rm -f rounding.out
117:
118: tls$(EXEEXT): $(TLS_OBJ)
119: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
120:
121: testrun$(EXEEXT): testrun.o
122: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o
123:
124: getgroups$(EXEEXT): getgroups.o
125: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
126:
127: getfsdev$(EXEEXT): getfsdev.o
128: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
129:
130: TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
131: trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
132: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
133:
134: T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
135: t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
136: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
137:
138: gen: conf proto.h man
139:
140: gensend: gen
141: rsync -aivzc $(GENFILES) samba.org:/home/ftp/pub/rsync/generated-files/
142:
143: conf:
144: cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
145:
146: configure.sh config.h.in: configure.ac aclocal.m4
147: @if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
148: @if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
149: autoconf -o configure.sh
150: autoheader && touch config.h.in
151: @if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
152: echo "configure.sh is unchanged."; \
153: rm configure.sh.old; \
154: else \
155: echo "configure.sh has CHANGED."; \
156: fi
157: @if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
158: echo "config.h.in is unchanged."; \
159: rm config.h.in.old; \
160: else \
161: echo "config.h.in has CHANGED."; \
162: fi
163: @if test -f configure.sh.old -o -f config.h.in.old; then \
164: if test "$(MAKECMDGOALS)" = reconfigure; then \
165: echo 'Continuing with "make reconfigure".'; \
166: else \
167: echo 'You may need to run:'; \
168: echo ' make reconfigure'; \
169: exit 1; \
170: fi \
171: fi
172:
173: reconfigure: configure.sh
174: ./config.status --recheck
175: ./config.status
176:
177: Makefile: Makefile.in config.status configure.sh config.h.in
178: @if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
179: @./config.status
180: @if diff Makefile Makefile.old >/dev/null 2>&1; then \
181: echo "Makefile is unchanged."; \
182: rm Makefile.old; \
183: else \
184: if test "$(MAKECMDGOALS)" = reconfigure; then \
185: echo 'Continuing with "make reconfigure".'; \
186: else \
187: echo "Makefile updated -- rerun your make command."; \
188: exit 1; \
189: fi \
190: fi
191:
192: rsync-ssl: $(srcdir)/rsync-ssl.in Makefile
193: sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/rsync-ssl.in >rsync-ssl
194: @chmod +x rsync-ssl
195:
196: stunnel-rsync: $(srcdir)/stunnel-rsync.in Makefile
197: sed 's;\@stunnel4\@;$(stunnel4);g' <$(srcdir)/stunnel-rsync.in >stunnel-rsync
198: @chmod +x stunnel-rsync
199:
200: stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
201: sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf
202:
203: proto: proto.h-tstamp
204:
205: proto.h: proto.h-tstamp
206: @if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
207:
208: proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c config.h
209: perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
210:
211: man: rsync.1 rsyncd.conf.5 man-copy
212:
213: man-copy:
214: @-if test -f rsync.1; then :; else echo 'Copying srcdir rsync.1'; cp -p $(srcdir)/rsync.1 .; fi
215: @-if test -f rsyncd.conf.5; then :; else echo 'Copying srcdir rsyncd.conf.5'; cp -p $(srcdir)/rsyncd.conf.5 .; fi
216:
217: rsync.1: rsync.yo
218: yodl2man -o rsync.1 $(srcdir)/rsync.yo
219: -$(srcdir)/tweak_manpage rsync.1
220:
221: rsyncd.conf.5: rsyncd.conf.yo
222: yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
223: -$(srcdir)/tweak_manpage rsyncd.conf.5
224:
225: clean: cleantests
226: rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
227: rounding rounding.h *.old
228:
229: cleantests:
230: rm -rf ./testtmp*
231:
232: # We try to delete built files from both the source and build
233: # directories, just in case somebody previously configured things in
234: # the source directory.
235: distclean: clean
236: rm -f Makefile config.h config.status
237: rm -f rsync-ssl stunnel-rsync stunnel-rsyncd.conf
238: rm -f lib/dummy popt/dummy zlib/dummy
239: rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
240: rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
241: rm -f config.cache config.log
242: rm -f $(srcdir)/config.cache $(srcdir)/config.log
243: rm -f shconfig $(srcdir)/shconfig
244: rm -f $(GENFILES)
245: rm -rf autom4te.cache
246:
247: # this target is really just for my use. It only works on a limited
248: # range of machines and is used to produce a list of potentially
249: # dead (ie. unused) functions in the code. (tridge)
250: finddead:
251: nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
252: nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
253: comm -13 nmused.txt nmfns.txt
254:
255: # 'check' is the GNU name, 'test' is the name for everybody else :-)
256: .PHONY: check test
257:
258: test: check
259:
260: # There seems to be no standard way to specify some variables as
261: # exported from a Makefile apart from listing them like this.
262:
263: # This depends on building rsync; if we need any helper programs it
264: # should depend on them too.
265:
266: # We try to run the scripts with POSIX mode on, in the hope that will
267: # catch Bash-isms earlier even if we're running on GNU. Of course, we
268: # might lose in the future where POSIX diverges from old sh.
269:
270: check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
271: rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
272:
273: check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
274: rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
275:
276: check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
277: rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30
278:
279: wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
280: wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
281: $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
282:
283: testsuite/chown-fake.test:
284: ln -s chown.test $(srcdir)/testsuite/chown-fake.test
285:
286: testsuite/devices-fake.test:
287: ln -s devices.test $(srcdir)/testsuite/devices-fake.test
288:
289: testsuite/xattrs-hlink.test:
290: ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test
291:
292: # This does *not* depend on building or installing: you can use it to
293: # check a version installed from a binary or some other source tree,
294: # if you want.
295:
296: installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
297: POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
298:
299: # TODO: Add 'dist' target; need to know which files will be included
300:
301: # Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
302: .PHONY: splint
303: splint:
304: splint +unixlib +gnuextensions -weak rsync.c
305:
306:
307: rsync.dvi: doc/rsync.texinfo
308: texi2dvi -o $@ $<
309:
310: rsync.ps: rsync.dvi
311: dvips -ta4 -o $@ $<
312:
313: rsync.pdf: doc/rsync.texinfo
314: texi2dvi -o $@ --pdf $<
315:
316:
317: doxygen:
318: cd $(srcdir) && rm dox/html/* && doxygen
319:
320: # for maintainers only
321: doxygen-upload:
322: rsync -avzv $(srcdir)/dox/html/ --delete \
323: samba.org:/home/httpd/html/rsync/doxygen/head/
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / rsync