# The Makefile for rsync (configure creates it from Makefile.in).
prefix=@prefix@
datarootdir=@datarootdir@
exec_prefix=@exec_prefix@
bindir=@bindir@
sbindir=@sbindir@
libdir=@libdir@/rsync
mandir=@mandir@
LIBS=@LIBS@
CC=@CC@
AWK=@AWK@
CFLAGS=@CFLAGS@
CPPFLAGS=@CPPFLAGS@
CXX=@CXX@
CXXFLAGS=@CXXFLAGS@
EXEEXT=@EXEEXT@
LDFLAGS=@LDFLAGS@
LIBSLP=@LIBSLP@
SLPOBJ=@SLPOBJ@
LIBOBJDIR=lib/
INSTALLCMD=@INSTALL@
INSTALLMAN=@INSTALL@
srcdir=@srcdir@
MKDIR_P=@MKDIR_P@
VPATH=$(srcdir)
SHELL=/bin/sh
.SUFFIXES:
.SUFFIXES: .c .o
SIMD_x86_64=simd-checksum-x86_64.o
ASM_x86_64=lib/md5-asm-x86_64.o
GENFILES=configure.sh aclocal.m4 config.h.in rsync.1 rsync.1.html \
rsync-ssl.1 rsync-ssl.1.html rsyncd.conf.5 rsyncd.conf.5.html rsyncdb.1 rsyncdb.1.html
HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
lib/pool_alloc.h lib/mdigest.h lib/md-defines.h version.h
LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
util.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
usage.o fileio.o batch.o clientname.o chmod.o db.o acls.o xattrs.o
OBJS3=progress.o pipe.o @ASM@
DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o $(SLPOBJ)
popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
popt/popthelp.o popt/poptparse.o
OBJS=$(OBJS1) $(OBJS2) $(OBJS3) @SIMD@ $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@
TLS_OBJ = tls.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o lib/wildmatch.o @BUILD_POPT@
# Programs we must have to run the test cases
CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test
# Objects for CHECK_PROGS to clean
CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
# note that the -I. is needed to handle config.h when using VPATH
.c.o:
@OBJ_SAVE@
$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
@OBJ_RESTORE@
all: Makefile rsync$(EXEEXT) stunnel-rsyncd.conf @MAKE_MAN@
.PHONY: all
.PHONY: install
install: all
-$(MKDIR_P) $(DESTDIR)$(bindir)
$(INSTALLCMD) $(INSTALL_STRIP) -m 755 rsync$(EXEEXT) $(DESTDIR)$(bindir)
$(INSTALLCMD) -m 755 $(srcdir)/rsync-ssl $(DESTDIR)$(bindir)
rsync -ilt rsyncdb$(EXEEXT) $(DESTDIR)$(bindir)/
-$(MKDIR_P) $(DESTDIR)$(mandir)/man1
-$(MKDIR_P) $(DESTDIR)$(mandir)/man5
if test -f rsync.1; then $(INSTALLMAN) -m 644 rsync.1 $(DESTDIR)$(mandir)/man1; fi
if test -f rsync-ssl.1; then $(INSTALLMAN) -m 644 rsync-ssl.1 $(DESTDIR)$(mandir)/man1; fi
if test -f rsyncdb.1; then $(INSTALLMAN) -m 644 rsyncdb.1 $(DESTDIR)$(mandir)/man1; fi
if test -f rsyncd.conf.5; then $(INSTALLMAN) -m 644 rsyncd.conf.5 $(DESTDIR)$(mandir)/man5; fi
install-ssl-daemon: stunnel-rsyncd.conf
-$(MKDIR_P) $(DESTDIR)/etc/stunnel
$(INSTALLCMD) -m 644 stunnel-rsyncd.conf $(DESTDIR)/etc/stunnel/rsyncd.conf
@if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
fi
install-all: install install-ssl-daemon
install-strip:
$(MAKE) INSTALL_STRIP='-s' install
rsync$(EXEEXT): $(OBJS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS) $(LIBSLP)
rsyncdb$(EXEEXT): rsync$(EXEEXT)
ln -s rsync$(EXEEXT) rsyncdb$(EXEEXT)
$(OBJS): $(HEADERS)
$(CHECK_OBJS): $(HEADERS)
tls.o xattrs.o: lib/sysxattrs.h
usage.o: latest-year.h help-rsync.h help-rsyncd.h help-rsyncdb.h git-version.h default-cvsignore.h
loadparm.o: default-dont-compress.h daemon-parm.h
flist.o: rounding.h
default-cvsignore.h default-dont-compress.h: rsync.1.md define-from-md.awk
$(AWK) -f $(srcdir)/define-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md
help-rsync.h help-rsyncd.h: rsync.1.md help-from-md.awk
$(AWK) -f $(srcdir)/help-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md
help-rsyncdb.h: rsyncdb.1.md help-from-md.awk
awk -f $(srcdir)/help-from-md.awk -v hfile=$@ $(srcdir)/rsyncdb.1.md
daemon-parm.h: daemon-parm.txt daemon-parm.awk
$(AWK) -f $(srcdir)/daemon-parm.awk $(srcdir)/daemon-parm.txt
rounding.h: rounding.c rsync.h proto.h
@for r in 0 1 3; do \
if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
if test -f "$$HOME/build_farm/build_test.fns"; then \
echo "EXTRA_ROUNDING is $$r" >&2; \
fi; \
break; \
fi; \
done
@rm -f rounding
@if test -f rounding.h; then : ; else \
cat rounding.out 1>&2; \
echo "Failed to create rounding.h!" 1>&2; \
exit 1; \
fi
@rm -f rounding.out
# While $(wildcard ...) is a GNU make idiom, at least other makes should just turn it into an
# empty string (we need something that will vanish if we're not building a git checkout).
# If you want an updated git version w/o GNU make, remove git-version.h after a pull.
git-version.h: mkgitver $(wildcard $(srcdir)/.git/logs/HEAD)
$(srcdir)/mkgitver
simd-checksum-x86_64.o: simd-checksum-x86_64.cpp
@$(srcdir)/cmdormsg disable-simd $(CXX) -I. $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $(srcdir)/simd-checksum-x86_64.cpp
simd-md5-parallel-x86_64.o: simd-md5-parallel-x86_64.cpp
@$(srcdir)/cmdormsg disable-simd $(CXX) -I. $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $(srcdir)/simd-md5-parallel-x86_64.cpp
lib/md5-asm-x86_64.o: lib/md5-asm-x86_64.S config.h lib/md-defines.h
@$(srcdir)/cmdormsg disable-asm $(CC) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/lib/md5-asm-x86_64.S
tls$(EXEEXT): $(TLS_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
testrun$(EXEEXT): testrun.o
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o
getgroups$(EXEEXT): getgroups.o
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
getfsdev$(EXEEXT): getfsdev.o
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
TRIMSLASH_OBJ = trimslash.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
.PHONY: conf
conf: configure.sh config.h.in
.PHONY: gen
gen: conf proto.h man
.PHONY: gensend
gensend: gen
rsync -aic $(GENFILES) $${SAMBA_HOST-samba.org}:/home/ftp/pub/rsync/generated-files/
aclocal.m4: $(srcdir)/m4/*.m4
aclocal -I $(srcdir)/m4
configure.sh config.h.in: configure.ac aclocal.m4
@if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
@if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
autoconf -o configure.sh
autoheader && touch config.h.in
@if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
echo "configure.sh is unchanged."; \
rm configure.sh.old; \
else \
echo "configure.sh has CHANGED."; \
fi
@if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
echo "config.h.in is unchanged."; \
rm config.h.in.old; \
else \
echo "config.h.in has CHANGED."; \
fi
@if test -f configure.sh.old -o -f config.h.in.old; then \
if test "$(MAKECMDGOALS)" = reconfigure; then \
echo 'Continuing with "make reconfigure".'; \
else \
echo 'You may need to run:'; \
echo ' make reconfigure'; \
exit 1; \
fi \
fi
.PHONY: reconfigure
reconfigure: configure.sh
./config.status --recheck
./config.status
.PHONY: restatus
restatus:
./config.status
Makefile: Makefile.in config.status configure.sh config.h.in
@if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
@./config.status
@if diff Makefile Makefile.old >/dev/null 2>&1; then \
echo "Makefile is unchanged."; \
rm Makefile.old; \
else \
if test "$(MAKECMDGOALS)" = reconfigure; then \
echo 'Continuing with "make reconfigure".'; \
else \
echo "Makefile updated -- rerun your make command."; \
exit 1; \
fi \
fi
stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf
.PHONY: proto
proto: proto.h-tstamp
proto.h: proto.h-tstamp
@if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h
$(AWK) -f $(srcdir)/mkproto.awk $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h
.PHONY: man
man: rsync.1 rsync-ssl.1 rsyncd.conf.5 rsyncdb.1
rsync.1: rsync.1.md md2man version.h Makefile
@$(srcdir)/maybe-make-man $(srcdir) rsync.1.md
rsync-ssl.1: rsync-ssl.1.md md2man version.h Makefile
@$(srcdir)/maybe-make-man $(srcdir) rsync-ssl.1.md
rsyncd.conf.5: rsyncd.conf.5.md md2man version.h Makefile
@$(srcdir)/maybe-make-man $(srcdir) rsyncd.conf.5.md
rsyncdb.1: rsyncdb.1.md md2man NEWS.md Makefile
@$(srcdir)/maybe-make-man $(srcdir) rsyncdb.1.md
.PHONY: clean
clean: cleantests
rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) rsyncdb$(EXEEXT) \
rounding rounding.h *.old rsync*.1 rsync*.5 rsync*.html \
daemon-parm.h help-*.h default-*.h proto.h proto.h-tstamp
.PHONY: cleantests
cleantests:
rm -rf ./testtmp*
# We try to delete built files from both the source and build
# directories, just in case somebody previously configured things in
# the source directory.
.PHONY: distclean
distclean: clean
for dir in $(srcdir) . ; do \
(cd "$$dir" && rm -rf Makefile config.h config.status stunnel-rsyncd.conf \
lib/dummy popt/dummy zlib/dummy config.cache config.log shconfig \
$(GENFILES) autom4te.cache) ; \
done
# this target is really just for my use. It only works on a limited
# range of machines and is used to produce a list of potentially
# dead (ie. unused) functions in the code. (tridge)
.PHONY: finddead
finddead:
nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
comm -13 nmused.txt nmfns.txt
@rm nmused.txt nmfns.txt
# 'check' is the GNU name, 'test' is the name for everybody else :-)
.PHONY: test
test: check
# There seems to be no standard way to specify some variables as
# exported from a Makefile apart from listing them like this.
# This depends on building rsync; if we need any helper programs it
# should depend on them too.
# We try to run the scripts with POSIX mode on, in the hope that will
# catch Bash-isms earlier even if we're running on GNU. Of course, we
# might lose in the future where POSIX diverges from old sh.
.PHONY: check
check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
.PHONY: check29
check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
.PHONY: check30
check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30
wildtest.o: wildtest.c t_stub.o lib/wildmatch.c rsync.h config.h
wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
testsuite/chown-fake.test:
ln -s chown.test $(srcdir)/testsuite/chown-fake.test
testsuite/devices-fake.test:
ln -s devices.test $(srcdir)/testsuite/devices-fake.test
testsuite/xattrs-hlink.test:
ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test
# This does *not* depend on building or installing: you can use it to
# check a version installed from a binary or some other source tree,
# if you want.
.PHONY: installcheck
installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
# TODO: Add 'dist' target; need to know which files will be included
# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
.PHONY: splint
splint:
splint +unixlib +gnuextensions -weak rsync.c
.PHONY: doxygen
doxygen:
cd $(srcdir) && rm dox/html/* && doxygen
# for maintainers only
.PHONY: doxygen-upload
doxygen-upload:
rsync -avzv $(srcdir)/dox/html/ --delete \
$${SAMBA_HOST-samba.org}:/home/httpd/html/rsync/doxygen/head/
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / rsync