--- embedaddon/rsync/OLDNEWS	2013/10/14 07:51:14	1.1.1.2
+++ embedaddon/rsync/OLDNEWS	2016/11/01 09:54:32	1.1.1.3
@@ -1,3 +1,363 @@
+NEWS for rsync 3.1.1 (22 Jun 2014)
+Protocol: 31 (unchanged)
+Changes since 3.1.0:
+
+  BUG FIXES:
+
+    - If the receiver gets bogus filenames from the sender (an unexpected
+      leading slash or a ".." infix dir), exit with an error.  This prevents a
+      malicious sender from trying to inject filenames that would affect an
+      area outside the destination directories.
+
+    - Fixed a failure to remove the partial-transfer temp file when interrupted
+      (and rsync is not saving the partial files).
+
+    - Changed the chown/group/xattr-set order to avoid losing some security-
+      related xattr info (that would get cleared by a chown).
+
+    - Fixed a bug in the xattr-finding code that could make a non-root-run
+      receiver not able to find some xattr numbers.
+
+    - Fixed a bug in the early daemon protocol where a timeout failed to be
+      honored (e.g. if the remote side fails to send us the initial protocol
+      greeting).
+
+    - Fixed unintended inclusion of commas in file numbers in the daemon log.
+
+    - We once again send the 'f' sub-flag (of -e) to the server side so it
+      knows that we can handle incremental-recursion directory errors properly
+      in older protocols.
+
+    - Fixed an issue with too-aggressive keep-alive messages causing a problem
+      for older rsync versions early in the transfer.
+
+    - Fixed an incorrect message about backup-directory-creation when using
+      --dry-run and the backup dir is not an absolute path.
+
+    - Fixed a bug where a failed deletion and/or a failed sender-side removal
+      would not affect the exit code.
+
+    - Fixed a bug that caused a failure when combining --delete-missing-args
+      with --xattrs and/or --acls.
+
+    - Fixed a strange dir_depth assertion error that was caused by empty-dir
+      removals and/or duplicate files in the transfer.
+
+    - Fixed a problem with --info=progress2's output stats where rsync would
+      only update the stats at the end of each file's transfer.  It now uses
+      the data that is flowing for the current file, making the stats more
+      accurate and less jumpy.
+
+    - Fixed an itemize bug that affected the combo of --link-dest, -X, and -n.
+
+    - Fixed a problem with delete messages not appearing in the log file when
+      the user didn't use --verbose.
+
+    - Improve chunked xattr reading for OS X.
+
+    - Removed an attempted hard-link xattr optimization that was causing a
+      transfer failure.  This removal is flagged in the compatibility code, so
+      if a better fix can be discovered, we have a way to flip it on again.
+
+    - Fixed a bug when the receiver is not configured to be able to hard link
+      symlimks/devices/special-file items but the sender sent some of these
+      items flagged as hard-linked.
+
+    - We now generate a better error if the buffer overflows in do_mknod().
+
+    - Fixed a problem reading more than 16 ACLs on some OSes.
+
+    - Fixed the reading of the secrets file to avoid an infinite wait when
+      the username is missing.
+
+    - Fixed a parsing problem in the --usermap/--groupmap options when using
+      MIN-MAX numbers.
+
+    - Switched Cygwin back to using socketpair "pipes" to try to speed it up.
+
+    - Added knowledge of a few new options to rrsync.
+
+  ENHANCEMENTS:
+
+    - Tweaked the temp-file naming when --temp-dir=DIR is used: the temp-file
+      names will not get a '.' prepended.
+
+    - Added support for a new-compression idiom that does not compress all the
+      matching data in a transfer.  This can help rsync to use less cpu when a
+      transfer has a lot of matching data, and also makes rsync compatible with
+      a non-bundled zlib.  See the --new-compress and --old-compress options in
+      the manpage.
+
+    - Added the support/rsync-no-vanished wrapper script.
+
+    - Made configure more prominently mention when we failed to find yodl (in
+      case the user wants to be able to generate manpages from *.yo files).
+
+    - Have manpage mention how a daemon's max-verbosity setting affects info
+      and debug options.  Also added more clarification on backslash removals
+      for excludes that contain wildcards.
+
+    - Have configure check if for the attr lib (for getxattr) for those systems
+      that need to link against it explicitly.
+
+    - Change the early dir-creation logic to only use that idiom in an
+      inc-recursive copy that is preserving directory times. e.g. using
+      --omit-dir-times will avoid these early directories being created.
+
+    - Fix a bug in cmp_time() that would return a wrong result if the 2 times
+      differed by an amount greater than what a time_t can hold.
+
+  DEVELOPER RELATED:
+
+    - We now include an example systemd file (in packaging/systemd).
+
+    - Tweaked configure to make sure that any intended use of the included popt
+      and/or zlib code is put early in the CFLAGS.
+
+NEWS for rsync 3.1.0 (28 Sep 2013)
+Protocol: 31 (changed)
+Changes since 3.0.9:
+
+  OUTPUT CHANGES:
+
+    - Output numbers in 3-digit groups by default (e.g. 1,234,567).  See the
+      --human-readable option for a way to turn it off.  See also the daemon's
+      "log format" parameter and related command-line options (including
+      --out-format) for a modifier that can be used to request digit-grouping
+      or human-readable output in log escapes. (Note that log output is
+      unchanged by default.)
+
+    - The --list-only option is now affected by the --human-readable setting.
+      It will display digit groupings by default, and unit suffixes if higher
+      levels of readability are requested.  Also, the column width for the size
+      output has increased from 11 to 14 characters when human readability is
+      enabled.  Use --no-h to get the old-style output and column size.
+
+    - The output of the --progress option has changed:  the string "xfer" was
+      shortened to "xfr", and the string "to-check" was shortened to "to-chk",
+      both designed to make room for the (by default) wider display of file
+      size numbers without making the total line-length longer.  Also, when
+      incremental recursion is enabled, the string "ir-chk" will be used
+      instead of "to-chk" up until the incremental-recursion scan is done,
+      letting you know that the value to check and the total value will still
+      be increasing as new files are found.
+
+    - Enhanced the --stats output: 1) to mention how many files were created
+      (protocol >= 28), 2) to mention how many files were deleted (a new line
+      for protocol 31, but only output when --delete is in effect), and 3) to
+      follow the file-count, created-count, and deleted-count with a subcount
+      list that shows the counts by type.  The wording of the transferred count
+      has also changed so that it is clearer that it is only a count of regular
+      files.
+
+  BUG FIXES:
+
+    - Fixed a bug in the iconv code when EINVAL or EILSEQ is returned with a
+      full output buffer.
+
+    - Fixed some rare bugs in --iconv processing that might cause a multibyte
+      character to get translated incorrectly.
+
+    - Fixed a bogus "vanished file" error if some files were specified with
+      "./" prefixes and others were not.
+
+    - Fixed a bug in --sparse where an extra gap could get inserted after a
+      partial write.
+
+    - Changed the way --progress overwrites its prior output in order to make
+      it nearly impossible for the progress to get overwritten by an error.
+
+    - Improved the propagation of abnormal-exit error messages.  This should
+      help the client side to receive errors from the server when it is exiting
+      abnormally, and should also avoid dying with an "connection unexpectedly
+      closed" exit when the closed connection is really expected.
+
+    - The sender now checks each file it plans to remove to ensure that it
+      hasn't changed from the first stat's info.  This helps to avoid losing
+      file data when the user is not using the option in a safe manner.
+
+    - Fixed a data-duplication bug in the compress option that made compression
+      less efficient.  This improves protocol 31 onward, while behaving in a
+      compatible (buggy) manner with older rsync protocols.
+
+    - When creating a temp-file, rsync is now a bit smarter about it dot-char
+      choices, which can fix a problem on OS X with names that start with "..".
+
+    - Rsync now sets a cleanup flag for --inplace and --append transfers that
+      will flush the write buffer if the transfer aborts.  This ensures that
+      more received data gets written out to the disk on an aborted transfer
+      (which is quite helpful on a slow, flaky connection).
+
+    - The reads that map_ptr() now does are aligned on 1K boundaries.  This
+      helps some filesystems and/or files that don't like unaligned reads.
+
+    - Fix an issue in the msleep() function if time jumps backwards.
+
+    - Fix daemon-server module-name splitting bug where an arg would get split
+      even if --protect-args was used.
+
+  ENHANCEMENTS:
+
+    - Added the --remote-option=OPT (-M OPT) command-line option that is useful
+      for things like sending a remote --log-file=FILE or --fake-super option.
+
+    - Added the --info=FLAGS and --debug=FLAGS options to allow finer-grained
+      control over what is output.  Added an extra type of --progress output
+      using --info=progress2.
+
+    - The --msgs2stderr option can help with debugging rsync by allowing the
+      debug messages to get output to stderr rather than travel via the socket
+      protocol.
+
+    - Added the --delete-missing-args and --ignore-missing-args options to
+      either delete or ignore user-specified files on the receiver that are
+      missing on the sender (normally the absence of user-specified files
+      generates an error).
+
+    - Added a "T" (terabyte) category to the --human-readable size suffixes.
+
+    - Added the --usermap/--groupmap/--chown options for manipulating file
+      ownership during the copy.
+
+    - Added the "%C" escape to the log-output handling, which will output the
+      MD5 checksum of any transferred file, or all files if --checksum was
+      specified (when protocol 30 or above is in effect).
+
+    - Added the "reverse lookup" parameter to the rsync daemon config file to
+      allow reverse-DNS lookups to be disabled.
+
+    - Added a forward-DNS lookup for the daemon's hosts allow/deny config.  Can
+      be disabled via "forward lookup" parameter (defaults to enabled).
+
+    - Added a way for more than one group to be specified in the daemon's
+      config file, including a way to specify that you want all of the
+      specified user's groups without having to name them.  Also changed the
+      daemon to complain about an inability to set explicitly-specified uid/gid
+      values, even when not run by a super-user.
+
+    - The daemon now tries to send the user the error messages from the
+      pre-xfer exec script when it fails.
+
+    - Improved the use of alt-dest options into an existing hierarchy of files:
+      If a match is found in an alt-dir, it takes precedence over an existing
+      file.  (We'll need to wait for a future version before attribute-changes
+      on otherwise unchanged files are safe when using an existing hierarchy.)
+
+    - Added per-user authorization options and group-authorization support to
+      the daemon's "auth users" parameter.
+
+    - Added a way to reference environment variables in a daemon's config file
+      (using %VAR% references).
+
+    - When replacing a non-dir with a symlink/hard-link/device/special-file,
+      the update should now be done in an atomic manner.
+
+    - Avoid re-sending xattr info for hard-linked files w/the same xattrs
+      (protocol 31).
+
+    - The backup code was improved to use better logic maintaining the backup
+      directory hierarchy.  Also, when a file is being backed up, rsync tries
+      to hard-link it into place so that the upcoming replacement of the
+      destination file will be atomic (for the normal, non-inplace logic).
+
+    - Added the ability to synchronize nano-second modified times.
+
+    - Added a few more default suffixes for the "dont compress" settings.
+
+    - Added the checking of the RSYNC_PROTECT_ARGS environment variable to allow
+      the default for the --protect-args command-line option to be overridden.
+
+    - Added the --preallocate command-line option.
+
+    - Allow --password-file=- to read the password from stdin (filename "-").
+
+    - Rsync now comes packaged with an rsync-ssl helper script that can be
+      used to contact a remote rsync daemon using a piped-stunnel command.
+      It also includes an stunnel config file to run the server side to
+      support ssl daemon connections.  See the packaging/lsb/rsync.spec
+      file for one way to package the resulting files.  (Suggestions for
+      how to make this even easier to install & use are welcomed.)
+
+    - Improved the speed of some --inplace updates when there are lots of
+      identical checksum blocks that end up being unusable.
+
+    - Added the --outbuf=N|L|B option for choosing the output buffering.
+
+    - Repeating the --fuzzy option now causes the code to look for fuzzy
+      matches inside alt-dest directories too.
+
+    - The --chmod option now supports numeric modes, e.g. --chmod=644,D755
+
+    - Added some Solaris xattr code.
+
+    - Made an rsync daemon (the listening process) exit with a 0 status when
+      it was signaled to die.  This helps launchd.
+
+    - Improved the RSYNC_* environment variables for the pre-xfer exec script:
+      when a daemon is sent multiple request args, they are now joined into a
+      single return value (separated by spaces) so that the RSYNC_REQUEST
+      environment variable is accurate for any "pre-xfer exec".  The values in
+      RSYNC_ARG# vars are no longer truncated at the "." arg (prior to the
+      request dirs/files), so that all the requested values are also listed
+      (separately) in RSYNC_ARG# variables.
+
+  EXTRAS:
+
+    - Added an "instant-rsyncd" script to the support directory, which makes
+      it easy to configure a simple rsync daemon in the current directory.
+
+    - Added the "mapfrom" and "mapto" scripts to the support directory, which
+      makes it easier to do user/group mapping in a local transfer based on
+      passwd/group files from another machine.
+
+    - There's a new, improved version of the lsh script in the support dir:
+      it's written in perl and supports -u without resorting to using sudo
+      (when run as root).  The old shell version is now named lsh.sh.
+
+    - There is a helper script named rsync-slash-strip in the support directory
+      for anyone that wants to change the way rsync handles args with trailing
+      slashes.  (e.g. arg/ would get stripped to arg while arg/. would turn into
+      arg/).
+
+  INTERNAL:
+
+    - The I/O code was rewritten to be simpler and do bigger buffered reads
+      over the socket.  The I/O between the receiver and the generator was
+      changed to be standard multiplexed-I/O (like that over the socket).
+
+    - The sender tries to use any dead time while the generator is looking for
+      files to transfer in order to do sender-side directory scanning in a more
+      parallel manner.
+
+    - A daemon can now inform a client about a daemon-configured timeout value
+      so that the client can assist in the keep-alive activity (protocol 31).
+
+    - The filter code received some refactoring to make it more extendible, to
+      read better, and do better sanity checking.
+
+    - Really big numbers are now output using our own big-num routine rather
+      than casting them to a double and using a %.0f conversion.
+
+    - The pool_alloc library has received some minor improvements in alignment
+      handling.
+
+    - Added init_stat_x() function to avoid duplication of acl/xattr init code.
+
+    - The included zlib was upgraded from 1.2.3 to 1.2.8.
+
+    - Rsync can now be compiled to use an unmodified zlib library instead of
+      the tweaked one that is included with rsync.  This will eventually
+      become the default, at which point we'll start the countdown to removing
+      the included zlib.  Until then, feel free to configure using:
+
+	./configure --with-included-zlib=no
+
+  DEVELOPER RELATED:
+
+    - Added more conditional debug output.
+
+    - Fixed some build issues for android and minix.
+
 NEWS for rsync 3.0.9 (23 Sep 2011)
 Protocol: 30 (unchanged)
 Changes since 3.0.8:
@@ -3290,6 +3650,8 @@ Changes since 2.4.6:
 
 Partial Protocol History
 	RELEASE DATE	VER.	DATE OF COMMIT*	PROTOCOL
+	21 Dec 2015	3.1.2			31
+	22 Jun 2014	3.1.1			31
 	28 Sep 2013	3.1.0	31 Aug 2008	31
 	23 Sep 2011	3.0.9			30
 	26 Mar 2011	3.0.8			30