Annotation of embedaddon/rsync/clientserver.c, revision 1.1.1.4
1.1 misho 1: /*
2: * The socket based protocol for setting up a connection with rsyncd.
3: *
4: * Copyright (C) 1998-2001 Andrew Tridgell <tridge@samba.org>
5: * Copyright (C) 2001-2002 Martin Pool <mbp@samba.org>
1.1.1.4 ! misho 6: * Copyright (C) 2002-2020 Wayne Davison
1.1 misho 7: *
8: * This program is free software; you can redistribute it and/or modify
9: * it under the terms of the GNU General Public License as published by
10: * the Free Software Foundation; either version 3 of the License, or
11: * (at your option) any later version.
12: *
13: * This program is distributed in the hope that it will be useful,
14: * but WITHOUT ANY WARRANTY; without even the implied warranty of
15: * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16: * GNU General Public License for more details.
17: *
18: * You should have received a copy of the GNU General Public License along
19: * with this program; if not, visit the http://fsf.org website.
20: */
21:
22: #include "rsync.h"
1.1.1.2 misho 23: #include "itypes.h"
1.1.1.4 ! misho 24: #include "ifuncs.h"
1.1 misho 25:
26: extern int quiet;
27: extern int dry_run;
28: extern int output_motd;
29: extern int list_only;
30: extern int am_sender;
31: extern int am_server;
32: extern int am_daemon;
33: extern int am_root;
1.1.1.4 ! misho 34: extern int msgs2stderr;
1.1 misho 35: extern int rsync_port;
36: extern int protect_args;
37: extern int ignore_errors;
38: extern int preserve_xattrs;
39: extern int kluge_around_eof;
1.1.1.2 misho 40: extern int munge_symlinks;
1.1.1.4 ! misho 41: extern int open_noatime;
1.1 misho 42: extern int sanitize_paths;
43: extern int numeric_ids;
44: extern int filesfrom_fd;
45: extern int remote_protocol;
46: extern int protocol_version;
1.1.1.4 ! misho 47: extern int always_checksum;
! 48: extern int checksum_files;
1.1 misho 49: extern int io_timeout;
50: extern int no_detach;
51: extern int write_batch;
52: extern int default_af_hint;
53: extern int logfile_format_has_i;
54: extern int logfile_format_has_o_or_i;
55: extern char *bind_address;
56: extern char *config_file;
1.1.1.4 ! misho 57: extern char *link_by_hash_dir;
1.1 misho 58: extern char *logfile_format;
59: extern char *files_from;
60: extern char *tmpdir;
1.1.1.4 ! misho 61: extern char *early_input_file;
1.1 misho 62: extern struct chmod_mode_struct *chmod_modes;
1.1.1.2 misho 63: extern filter_rule_list daemon_filter_list;
1.1 misho 64: #ifdef ICONV_OPTION
65: extern char *iconv_opt;
66: extern iconv_t ic_send, ic_recv;
67: #endif
1.1.1.4 ! misho 68: extern uid_t our_uid;
! 69: extern gid_t our_gid;
1.1 misho 70:
71: char *auth_user;
72: int read_only = 0;
73: int module_id = -1;
1.1.1.4 ! misho 74: int pid_file_fd = -1;
! 75: int early_input_len = 0;
! 76: char *early_input = NULL;
! 77: pid_t namecvt_pid = 0;
1.1 misho 78: struct chmod_mode_struct *daemon_chmod_modes;
79:
1.1.1.4 ! misho 80: #define EARLY_INPUT_CMD "#early_input="
! 81: #define EARLY_INPUT_CMDLEN (sizeof EARLY_INPUT_CMD - 1)
! 82:
1.1 misho 83: /* module_dirlen is the length of the module_dir string when in daemon
84: * mode and module_dir is not "/"; otherwise 0. (Note that a chroot-
85: * enabled module can have a non-"/" module_dir these days.) */
86: char *module_dir = NULL;
87: unsigned int module_dirlen = 0;
88:
89: char *full_module_path;
90:
91: static int rl_nulls = 0;
1.1.1.4 ! misho 92: static int namecvt_fd_req = -1, namecvt_fd_ans = -1;
1.1 misho 93:
94: #ifdef HAVE_SIGACTION
95: static struct sigaction sigact;
96: #endif
97:
1.1.1.3 misho 98: static item_list gid_list = EMPTY_ITEM_LIST;
1.1.1.2 misho 99:
100: /* Used when "reverse lookup" is off. */
101: const char undetermined_hostname[] = "UNDETERMINED";
102:
1.1 misho 103: /**
104: * Run a client connected to an rsyncd. The alternative to this
105: * function for remote-shell connections is do_cmd().
106: *
107: * After negotiating which module to use and reading the server's
108: * motd, this hands over to client_run(). Telling the server the
109: * module will cause it to chroot/setuid/etc.
110: *
111: * Instead of doing a transfer, the client may at this stage instead
112: * get a listing of remote modules and exit.
113: *
114: * @return -1 for error in startup, or the result of client_run().
115: * Either way, it eventually gets passed to exit_cleanup().
116: **/
117: int start_socket_client(char *host, int remote_argc, char *remote_argv[],
118: int argc, char *argv[])
119: {
120: int fd, ret;
121: char *p, *user = NULL;
122:
123: /* This is redundant with code in start_inband_exchange(), but this
124: * short-circuits a problem in the client before we open a socket,
125: * and the extra check won't hurt. */
126: if (**remote_argv == '/') {
127: rprintf(FERROR,
128: "ERROR: The remote path must start with a module name not a /\n");
129: return -1;
130: }
131:
132: if ((p = strrchr(host, '@')) != NULL) {
133: user = host;
134: host = p+1;
135: *p = '\0';
136: }
137:
1.1.1.4 ! misho 138: fd = open_socket_out_wrapped(host, rsync_port, bind_address, default_af_hint);
1.1 misho 139: if (fd == -1)
140: exit_cleanup(RERR_SOCKETIO);
141:
142: #ifdef ICONV_CONST
143: setup_iconv();
144: #endif
145:
1.1.1.4 ! misho 146: ret = start_inband_exchange(fd, fd, user, host, remote_argc, remote_argv);
1.1 misho 147:
148: return ret ? ret : client_run(fd, fd, -1, argc, argv);
149: }
150:
151: static int exchange_protocols(int f_in, int f_out, char *buf, size_t bufsiz, int am_client)
152: {
153: int remote_sub = -1;
154: #if SUBPROTOCOL_VERSION != 0
155: int our_sub = protocol_version < PROTOCOL_VERSION ? 0 : SUBPROTOCOL_VERSION;
156: #else
157: int our_sub = 0;
158: #endif
159:
160: io_printf(f_out, "@RSYNCD: %d.%d\n", protocol_version, our_sub);
161: if (!am_client) {
1.1.1.4 ! misho 162: char *motd = lp_motd_file();
1.1 misho 163: if (motd && *motd) {
1.1.1.4 ! misho 164: FILE *f = fopen(motd, "r");
1.1 misho 165: while (f && !feof(f)) {
166: int len = fread(buf, 1, bufsiz - 1, f);
167: if (len > 0)
168: write_buf(f_out, buf, len);
169: }
170: if (f)
171: fclose(f);
172: write_sbuf(f_out, "\n");
173: }
174: }
175:
176: /* This strips the \n. */
1.1.1.2 misho 177: if (!read_line_old(f_in, buf, bufsiz, 0)) {
1.1 misho 178: if (am_client)
179: rprintf(FERROR, "rsync: did not see server greeting\n");
180: return -1;
181: }
182:
183: if (sscanf(buf, "@RSYNCD: %d.%d", &remote_protocol, &remote_sub) < 1) {
184: if (am_client)
185: rprintf(FERROR, "rsync: server sent \"%s\" rather than greeting\n", buf);
186: else
187: io_printf(f_out, "@ERROR: protocol startup error\n");
188: return -1;
189: }
190:
191: if (remote_sub < 0) {
192: if (remote_protocol == 30) {
193: if (am_client)
194: rprintf(FERROR, "rsync: server is speaking an incompatible beta of protocol 30\n");
195: else
196: io_printf(f_out, "@ERROR: your client is speaking an incompatible beta of protocol 30\n");
197: return -1;
198: }
199: remote_sub = 0;
200: }
201:
202: if (protocol_version > remote_protocol) {
203: protocol_version = remote_protocol;
204: if (remote_sub)
205: protocol_version--;
206: } else if (protocol_version == remote_protocol) {
207: if (remote_sub != our_sub)
208: protocol_version--;
209: }
210: #if SUBPROTOCOL_VERSION != 0
211: else if (protocol_version < remote_protocol) {
212: if (our_sub)
213: protocol_version--;
214: }
215: #endif
216:
217: if (protocol_version >= 30)
218: rl_nulls = 1;
219:
220: return 0;
221: }
222:
1.1.1.4 ! misho 223: int start_inband_exchange(int f_in, int f_out, const char *user, const char *host, int argc, char *argv[])
1.1 misho 224: {
225: int i, modlen;
226: char line[BIGPATHBUFLEN];
227: char *sargs[MAX_ARGS];
228: int sargc = 0;
229: char *p, *modname;
230:
231: assert(argc > 0 && *argv != NULL);
232:
233: if (**argv == '/') {
234: rprintf(FERROR,
235: "ERROR: The remote path must start with a module name\n");
236: return -1;
237: }
238:
239: if (!(p = strchr(*argv, '/')))
240: modlen = strlen(*argv);
241: else
242: modlen = p - *argv;
243:
1.1.1.4 ! misho 244: modname = new_array(char, modlen+1+1); /* room for '/' & '\0' */
1.1 misho 245: strlcpy(modname, *argv, modlen + 1);
246: modname[modlen] = '/';
247: modname[modlen+1] = '\0';
248:
249: if (!user)
250: user = getenv("USER");
251: if (!user)
252: user = getenv("LOGNAME");
253:
254: if (exchange_protocols(f_in, f_out, line, sizeof line, 1) < 0)
255: return -1;
256:
1.1.1.4 ! misho 257: if (early_input_file) {
! 258: STRUCT_STAT st;
! 259: FILE *f = fopen(early_input_file, "rb");
! 260: if (!f || do_fstat(fileno(f), &st) < 0) {
! 261: rsyserr(FERROR, errno, "failed to open %s", early_input_file);
! 262: return -1;
! 263: }
! 264: early_input_len = st.st_size;
! 265: if (early_input_len > (int)sizeof line) {
! 266: rprintf(FERROR, "%s is > %d bytes.\n", early_input_file, (int)sizeof line);
! 267: return -1;
! 268: }
! 269: if (early_input_len > 0) {
! 270: io_printf(f_out, EARLY_INPUT_CMD "%d\n", early_input_len);
! 271: while (early_input_len > 0) {
! 272: int len;
! 273: if (feof(f)) {
! 274: rprintf(FERROR, "Early EOF in %s\n", early_input_file);
! 275: return -1;
! 276: }
! 277: len = fread(line, 1, early_input_len, f);
! 278: if (len > 0) {
! 279: write_buf(f_out, line, len);
! 280: early_input_len -= len;
! 281: }
! 282: }
! 283: }
! 284: fclose(f);
! 285: }
! 286:
1.1 misho 287: server_options(sargs, &sargc);
288:
289: if (sargc >= MAX_ARGS - 2)
290: goto arg_overflow;
291:
292: sargs[sargc++] = ".";
293:
294: while (argc > 0) {
295: if (sargc >= MAX_ARGS - 1) {
296: arg_overflow:
297: rprintf(FERROR, "internal: args[] overflowed in do_cmd()\n");
298: exit_cleanup(RERR_SYNTAX);
299: }
300: if (strncmp(*argv, modname, modlen) == 0
301: && argv[0][modlen] == '\0')
302: sargs[sargc++] = modname; /* we send "modname/" */
303: else if (**argv == '-') {
304: if (asprintf(sargs + sargc++, "./%s", *argv) < 0)
305: out_of_memory("start_inband_exchange");
306: } else
307: sargs[sargc++] = *argv;
308: argv++;
309: argc--;
310: }
311:
312: sargs[sargc] = NULL;
313:
1.1.1.2 misho 314: if (DEBUG_GTE(CMD, 1))
1.1 misho 315: print_child_argv("sending daemon args:", sargs);
316:
317: io_printf(f_out, "%.*s\n", modlen, modname);
318:
319: /* Old servers may just drop the connection here,
320: rather than sending a proper EXIT command. Yuck. */
321: kluge_around_eof = list_only && protocol_version < 25 ? 1 : 0;
322:
323: while (1) {
1.1.1.2 misho 324: if (!read_line_old(f_in, line, sizeof line, 0)) {
1.1 misho 325: rprintf(FERROR, "rsync: didn't get server startup line\n");
326: return -1;
327: }
328:
329: if (strncmp(line,"@RSYNCD: AUTHREQD ",18) == 0) {
330: auth_client(f_out, user, line+18);
331: continue;
332: }
333:
1.1.1.4 ! misho 334: if (strcmp(line, "@RSYNCD: GSS") == 0) {
! 335: #ifdef GSSAPI_OPTION
! 336: if (auth_gss_client(f_out, host) < 0)
! 337: return -1;
! 338: continue;
! 339: #else
! 340: rprintf(FERROR, "GSSAPI is not supported\n");
! 341: return -1;
! 342: #endif
! 343: }
! 344:
1.1 misho 345: if (strcmp(line,"@RSYNCD: OK") == 0)
346: break;
347:
348: if (strcmp(line,"@RSYNCD: EXIT") == 0) {
349: /* This is sent by recent versions of the
350: * server to terminate the listing of modules.
351: * We don't want to go on and transfer
352: * anything; just exit. */
353: exit(0);
354: }
355:
356: if (strncmp(line, "@ERROR", 6) == 0) {
357: rprintf(FERROR, "%s\n", line);
358: /* This is always fatal; the server will now
359: * close the socket. */
360: return -1;
361: }
362:
363: /* This might be a MOTD line or a module listing, but there is
364: * no way to differentiate it. The manpage mentions this. */
365: if (output_motd)
366: rprintf(FINFO, "%s\n", line);
367: }
368: kluge_around_eof = 0;
369:
370: if (rl_nulls) {
371: for (i = 0; i < sargc; i++) {
372: if (!sargs[i]) /* stop at --protect-args NULL */
373: break;
374: write_sbuf(f_out, sargs[i]);
375: write_byte(f_out, 0);
376: }
377: write_byte(f_out, 0);
378: } else {
379: for (i = 0; i < sargc; i++)
380: io_printf(f_out, "%s\n", sargs[i]);
381: write_sbuf(f_out, "\n");
382: }
383:
384: if (protect_args)
385: send_protected_args(f_out, sargs);
386:
387: if (protocol_version < 23) {
388: if (protocol_version == 22 || !am_sender)
1.1.1.2 misho 389: io_start_multiplex_in(f_in);
1.1 misho 390: }
391:
392: free(modname);
393:
394: return 0;
395: }
396:
1.1.1.4 ! misho 397: #ifdef HAVE_PUTENV
! 398: static int read_arg_from_pipe(int fd, char *buf, int limit)
! 399: {
! 400: char *bp = buf, *eob = buf + limit - 1;
! 401:
! 402: while (1) {
! 403: int got = read(fd, bp, 1);
! 404: if (got != 1) {
! 405: if (got < 0 && errno == EINTR)
! 406: continue;
! 407: return -1;
! 408: }
! 409: if (*bp == '\0')
! 410: break;
! 411: if (bp < eob)
! 412: bp++;
! 413: }
! 414: *bp = '\0';
! 415:
! 416: return bp - buf;
! 417: }
! 418: #endif
! 419:
! 420: static void set_env_str(const char *var, const char *str)
! 421: {
! 422: #ifdef HAVE_PUTENV
! 423: char *mem;
! 424: if (asprintf(&mem, "%s=%s", var, str) < 0)
! 425: out_of_memory("set_env_str");
! 426: putenv(mem);
! 427: #endif
! 428: }
! 429:
! 430: #ifdef HAVE_PUTENV
! 431: void set_env_num(const char *var, long num)
! 432: {
! 433: char *mem;
! 434: if (asprintf(&mem, "%s=%ld", var, num) < 0)
! 435: out_of_memory("set_env_num");
! 436: putenv(mem);
! 437: }
! 438: #endif
! 439:
! 440: /* Used for "early exec", "pre-xfer exec", and the "name converter" script. */
! 441: static pid_t start_pre_exec(const char *cmd, int *arg_fd_ptr, int *error_fd_ptr)
! 442: {
! 443: int arg_fds[2], error_fds[2], arg_fd;
! 444: pid_t pid;
! 445:
! 446: if ((error_fd_ptr && pipe(error_fds) < 0) || pipe(arg_fds) < 0 || (pid = fork()) < 0)
! 447: return (pid_t)-1;
! 448:
! 449: if (pid == 0) {
! 450: char buf[BIGPATHBUFLEN];
! 451: int j, len, status;
! 452:
! 453: if (error_fd_ptr) {
! 454: close(error_fds[0]);
! 455: set_blocking(error_fds[1]);
! 456: }
! 457:
! 458: close(arg_fds[1]);
! 459: arg_fd = arg_fds[0];
! 460: set_blocking(arg_fd);
! 461:
! 462: len = read_arg_from_pipe(arg_fd, buf, BIGPATHBUFLEN);
! 463: if (len <= 0)
! 464: _exit(1);
! 465: set_env_str("RSYNC_REQUEST", buf);
! 466:
! 467: for (j = 0; ; j++) {
! 468: char *p;
! 469: len = read_arg_from_pipe(arg_fd, buf, BIGPATHBUFLEN);
! 470: if (len <= 0) {
! 471: if (!len)
! 472: break;
! 473: _exit(1);
! 474: }
! 475: if (asprintf(&p, "RSYNC_ARG%d=%s", j, buf) >= 0)
! 476: putenv(p);
! 477: }
! 478:
! 479: dup2(arg_fd, STDIN_FILENO);
! 480: close(arg_fd);
! 481:
! 482: if (error_fd_ptr) {
! 483: dup2(error_fds[1], STDOUT_FILENO);
! 484: close(error_fds[1]);
! 485: }
! 486:
! 487: status = shell_exec(cmd);
! 488:
! 489: if (!WIFEXITED(status))
! 490: _exit(1);
! 491: _exit(WEXITSTATUS(status));
! 492: }
! 493:
! 494: if (error_fd_ptr) {
! 495: close(error_fds[1]);
! 496: *error_fd_ptr = error_fds[0];
! 497: set_blocking(error_fds[0]);
! 498: }
! 499:
! 500: close(arg_fds[0]);
! 501: arg_fd = *arg_fd_ptr = arg_fds[1];
! 502: set_blocking(arg_fd);
! 503:
! 504: return pid;
! 505: }
! 506:
! 507: static void write_pre_exec_args(int write_fd, char *request, char **early_argv, char **argv, int exec_type)
1.1 misho 508: {
1.1.1.4 ! misho 509: int j = 0;
1.1 misho 510:
511: if (!request)
512: request = "(NONE)";
513:
1.1.1.2 misho 514: write_buf(write_fd, request, strlen(request)+1);
1.1 misho 515: if (early_argv) {
516: for ( ; *early_argv; early_argv++)
1.1.1.2 misho 517: write_buf(write_fd, *early_argv, strlen(*early_argv)+1);
1.1 misho 518: j = 1; /* Skip arg0 name in argv. */
519: }
1.1.1.4 ! misho 520: if (argv) {
! 521: for ( ; argv[j]; j++)
! 522: write_buf(write_fd, argv[j], strlen(argv[j])+1);
! 523: }
1.1.1.2 misho 524: write_byte(write_fd, 0);
525:
1.1.1.4 ! misho 526: if (exec_type == 1 && early_input_len)
! 527: write_buf(write_fd, early_input, early_input_len);
1.1.1.2 misho 528:
1.1.1.4 ! misho 529: if (exec_type != 2) /* the name converter needs this left open */
! 530: close(write_fd);
! 531: }
! 532:
! 533: static char *finish_pre_exec(const char *desc, pid_t pid, int read_fd)
! 534: {
! 535: char buf[BIGPATHBUFLEN], *bp, *cr;
! 536: int j, status = -1, msglen = sizeof buf - 1;
! 537:
! 538: if (read_fd >= 0) {
! 539: /* Read the stdout from the program. This it is only displayed
! 540: * to the user if the script also returns an error status. */
! 541: for (bp = buf, cr = buf; msglen > 0; msglen -= j) {
! 542: if ((j = read(read_fd, bp, msglen)) <= 0) {
! 543: if (j == 0)
! 544: break;
! 545: if (errno == EINTR)
! 546: continue;
! 547: break; /* Just ignore the read error for now... */
! 548: }
! 549: bp[j] = '\0';
! 550: while (1) {
! 551: if ((cr = strchr(cr, '\r')) == NULL) {
! 552: cr = bp + j;
! 553: break;
! 554: }
! 555: if (!cr[1])
! 556: break; /* wait for more data before we decide what to do */
! 557: if (cr[1] == '\n') {
! 558: memmove(cr, cr+1, j - (cr - bp));
! 559: j--;
! 560: } else
! 561: cr++;
! 562: }
! 563: bp += j;
1.1.1.2 misho 564: }
1.1.1.4 ! misho 565: *bp = '\0';
1.1 misho 566:
1.1.1.4 ! misho 567: close(read_fd);
! 568: } else
! 569: *buf = '\0';
1.1 misho 570:
571: if (wait_process(pid, &status, 0) < 0
572: || !WIFEXITED(status) || WEXITSTATUS(status) != 0) {
573: char *e;
1.1.1.4 ! misho 574: if (asprintf(&e, "%s returned failure (%d)%s%s%s\n%s",
! 575: desc, status, status < 0 ? ": " : "",
1.1.1.2 misho 576: status < 0 ? strerror(errno) : "",
577: *buf ? ":" : "", buf) < 0)
578: return "out_of_memory in finish_pre_exec\n";
1.1 misho 579: return e;
580: }
581: return NULL;
582: }
583:
584: static int path_failure(int f_out, const char *dir, BOOL was_chdir)
585: {
586: if (was_chdir)
1.1.1.4 ! misho 587: rsyserr(FLOG, errno, "chdir %s failed", dir);
1.1 misho 588: else
589: rprintf(FLOG, "normalize_path(%s) failed\n", dir);
590: io_printf(f_out, "@ERROR: chdir failed\n");
591: return -1;
592: }
593:
1.1.1.2 misho 594: static int add_a_group(int f_out, const char *gname)
595: {
1.1.1.3 misho 596: gid_t gid, *gid_p;
1.1.1.2 misho 597: if (!group_to_gid(gname, &gid, True)) {
598: rprintf(FLOG, "Invalid gid %s\n", gname);
599: io_printf(f_out, "@ERROR: invalid gid %s\n", gname);
600: return -1;
601: }
1.1.1.3 misho 602: gid_p = EXPAND_ITEM_LIST(&gid_list, gid_t, -32);
603: *gid_p = gid;
1.1.1.2 misho 604: return 0;
605: }
606:
607: #ifdef HAVE_GETGROUPLIST
608: static int want_all_groups(int f_out, uid_t uid)
609: {
610: const char *err;
1.1.1.3 misho 611: if ((err = getallgroups(uid, &gid_list)) != NULL) {
1.1.1.2 misho 612: rsyserr(FLOG, errno, "%s", err);
613: io_printf(f_out, "@ERROR: %s\n", err);
614: return -1;
615: }
616: return 0;
617: }
618: #elif defined HAVE_INITGROUPS
619: static struct passwd *want_all_groups(int f_out, uid_t uid)
620: {
621: struct passwd *pw;
1.1.1.3 misho 622: gid_t *gid_p;
1.1.1.2 misho 623: if ((pw = getpwuid(uid)) == NULL) {
624: rsyserr(FLOG, errno, "getpwuid failed");
625: io_printf(f_out, "@ERROR: getpwuid failed\n");
626: return NULL;
627: }
1.1.1.3 misho 628: /* Start with the default group and initgroups() will add the rest. */
629: gid_p = EXPAND_ITEM_LIST(&gid_list, gid_t, -32);
630: *gid_p = pw->pw_gid;
1.1.1.2 misho 631: return pw;
632: }
633: #endif
634:
635: static int rsync_module(int f_in, int f_out, int i, const char *addr, const char *host)
1.1 misho 636: {
637: int argc;
638: char **argv, **orig_argv, **orig_early_argv, *module_chdir;
639: char line[BIGPATHBUFLEN];
1.1.1.2 misho 640: #if defined HAVE_INITGROUPS && !defined HAVE_GETGROUPLIST
641: struct passwd *pw = NULL;
642: #endif
643: uid_t uid;
644: int set_uid;
1.1 misho 645: char *p, *err_msg = NULL;
646: char *name = lp_name(i);
647: int use_chroot = lp_use_chroot(i);
1.1.1.2 misho 648: int ret, pre_exec_arg_fd = -1, pre_exec_error_fd = -1;
649: int save_munge_symlinks;
1.1 misho 650: pid_t pre_exec_pid = 0;
651: char *request = NULL;
652:
1.1.1.2 misho 653: set_env_str("RSYNC_MODULE_NAME", name);
654:
1.1 misho 655: #ifdef ICONV_OPTION
656: iconv_opt = lp_charset(i);
657: if (*iconv_opt)
658: setup_iconv();
659: iconv_opt = NULL;
660: #endif
661:
1.1.1.2 misho 662: /* If reverse lookup is disabled globally but enabled for this module,
663: * we need to do it now before the access check. */
664: if (host == undetermined_hostname && lp_reverse_lookup(i))
1.1.1.4 ! misho 665: host = client_name(client_addr(f_in));
1.1.1.2 misho 666: set_env_str("RSYNC_HOST_NAME", host);
667: set_env_str("RSYNC_HOST_ADDR", addr);
668:
669: if (!allow_access(addr, &host, i)) {
1.1 misho 670: rprintf(FLOG, "rsync denied on module %s from %s (%s)\n",
671: name, host, addr);
672: if (!lp_list(i))
673: io_printf(f_out, "@ERROR: Unknown module '%s'\n", name);
674: else {
675: io_printf(f_out,
676: "@ERROR: access denied to %s from %s (%s)\n",
677: name, host, addr);
678: }
679: return -1;
680: }
681:
1.1.1.4 ! misho 682: if (*lp_link_by_hash_dir(i))
! 683: link_by_hash_dir = lp_link_by_hash_dir(i);
! 684:
! 685: if (am_daemon > 0) {
1.1 misho 686: rprintf(FLOG, "rsync allowed access on module %s from %s (%s)\n",
687: name, host, addr);
688: }
689:
690: if (!claim_connection(lp_lock_file(i), lp_max_connections(i))) {
691: if (errno) {
692: rsyserr(FLOG, errno, "failed to open lock file %s",
693: lp_lock_file(i));
694: io_printf(f_out, "@ERROR: failed to open lock file\n");
695: } else {
696: rprintf(FLOG, "max connections (%d) reached\n",
697: lp_max_connections(i));
698: io_printf(f_out, "@ERROR: max connections (%d) reached -- try again later\n",
699: lp_max_connections(i));
700: }
701: return -1;
702: }
703:
1.1.1.2 misho 704: read_only = lp_read_only(i); /* may also be overridden by auth_server() */
1.1.1.4 ! misho 705: #ifdef GSSAPI_OPTION
! 706: if (lp_use_gssapi(i))
! 707: auth_user = auth_gss_server(f_in, f_out, i, host, addr, "@RSYNCD: GSS");
! 708: else
! 709: #endif
! 710: auth_user = auth_server(f_in, f_out, i, host, addr, "@RSYNCD: AUTHREQD ");
1.1 misho 711:
712: if (!auth_user) {
713: io_printf(f_out, "@ERROR: auth failed on module %s\n", name);
714: return -1;
715: }
1.1.1.2 misho 716: set_env_str("RSYNC_USER_NAME", auth_user);
1.1 misho 717:
718: module_id = i;
719:
1.1.1.4 ! misho 720: if (lp_transfer_logging(module_id) && !logfile_format)
! 721: logfile_format = lp_log_format(module_id);
1.1 misho 722: if (log_format_has(logfile_format, 'i'))
723: logfile_format_has_i = 1;
724: if (logfile_format_has_i || log_format_has(logfile_format, 'o'))
725: logfile_format_has_o_or_i = 1;
726:
1.1.1.2 misho 727: uid = MY_UID();
1.1.1.4 ! misho 728: am_root = (uid == ROOT_UID);
1.1 misho 729:
1.1.1.4 ! misho 730: p = *lp_uid(module_id) ? lp_uid(module_id) : am_root ? NOBODY_USER : NULL;
1.1.1.2 misho 731: if (p) {
732: if (!user_to_uid(p, &uid, True)) {
733: rprintf(FLOG, "Invalid uid %s\n", p);
734: io_printf(f_out, "@ERROR: invalid uid %s\n", p);
735: return -1;
1.1 misho 736: }
1.1.1.2 misho 737: set_uid = 1;
738: } else
739: set_uid = 0;
1.1 misho 740:
1.1.1.4 ! misho 741: p = *lp_gid(module_id) ? conf_strtok(lp_gid(module_id)) : NULL;
1.1.1.2 misho 742: if (p) {
743: /* The "*" gid must be the first item in the list. */
744: if (strcmp(p, "*") == 0) {
745: #ifdef HAVE_GETGROUPLIST
746: if (want_all_groups(f_out, uid) < 0)
747: return -1;
748: #elif defined HAVE_INITGROUPS
749: if ((pw = want_all_groups(f_out, uid)) == NULL)
750: return -1;
751: #else
752: rprintf(FLOG, "This rsync does not support a gid of \"*\"\n");
753: io_printf(f_out, "@ERROR: invalid gid setting.\n");
754: return -1;
755: #endif
756: } else if (add_a_group(f_out, p) < 0)
757: return -1;
1.1.1.4 ! misho 758: while ((p = conf_strtok(NULL)) != NULL) {
1.1.1.2 misho 759: #if defined HAVE_INITGROUPS && !defined HAVE_GETGROUPLIST
760: if (pw) {
761: rprintf(FLOG, "This rsync cannot add groups after \"*\".\n");
762: io_printf(f_out, "@ERROR: invalid gid setting.\n");
1.1 misho 763: return -1;
764: }
1.1.1.2 misho 765: #endif
766: if (add_a_group(f_out, p) < 0)
767: return -1;
1.1 misho 768: }
1.1.1.2 misho 769: } else if (am_root) {
770: if (add_a_group(f_out, NOBODY_GROUP) < 0)
771: return -1;
1.1 misho 772: }
773:
1.1.1.4 ! misho 774: module_dir = lp_path(module_id);
1.1 misho 775: if (*module_dir == '\0') {
776: rprintf(FLOG, "No path specified for module %s\n", name);
777: io_printf(f_out, "@ERROR: no path setting.\n");
778: return -1;
779: }
780: if (use_chroot) {
781: if ((p = strstr(module_dir, "/./")) != NULL) {
782: *p = '\0'; /* Temporary... */
783: if (!(module_chdir = normalize_path(module_dir, True, NULL)))
784: return path_failure(f_out, module_dir, False);
785: *p = '/';
786: if (!(p = normalize_path(p + 2, True, &module_dirlen)))
787: return path_failure(f_out, strstr(module_dir, "/./"), False);
788: if (!(full_module_path = normalize_path(module_dir, False, NULL)))
789: full_module_path = module_dir;
790: module_dir = p;
791: } else {
792: if (!(module_chdir = normalize_path(module_dir, False, NULL)))
793: return path_failure(f_out, module_dir, False);
794: full_module_path = module_chdir;
795: module_dir = "/";
796: module_dirlen = 1;
797: }
798: } else {
799: if (!(module_chdir = normalize_path(module_dir, False, &module_dirlen)))
800: return path_failure(f_out, module_dir, False);
801: full_module_path = module_dir = module_chdir;
802: }
1.1.1.2 misho 803: set_env_str("RSYNC_MODULE_PATH", full_module_path);
1.1 misho 804:
805: if (module_dirlen == 1) {
806: module_dirlen = 0;
807: set_filter_dir("/", 1);
808: } else
809: set_filter_dir(module_dir, module_dirlen);
810:
1.1.1.4 ! misho 811: p = lp_filter(module_id);
1.1.1.2 misho 812: parse_filter_str(&daemon_filter_list, p, rule_template(FILTRULE_WORD_SPLIT),
1.1.1.4 ! misho 813: XFLG_ABS_IF_SLASH | XFLG_DIR2WILD3);
1.1 misho 814:
1.1.1.4 ! misho 815: p = lp_include_from(module_id);
1.1.1.2 misho 816: parse_filter_file(&daemon_filter_list, p, rule_template(FILTRULE_INCLUDE),
1.1.1.4 ! misho 817: XFLG_ABS_IF_SLASH | XFLG_DIR2WILD3 | XFLG_OLD_PREFIXES | XFLG_FATAL_ERRORS);
1.1 misho 818:
1.1.1.4 ! misho 819: p = lp_include(module_id);
1.1.1.2 misho 820: parse_filter_str(&daemon_filter_list, p,
1.1.1.4 ! misho 821: rule_template(FILTRULE_INCLUDE | FILTRULE_WORD_SPLIT),
! 822: XFLG_ABS_IF_SLASH | XFLG_DIR2WILD3 | XFLG_OLD_PREFIXES);
1.1 misho 823:
1.1.1.4 ! misho 824: p = lp_exclude_from(module_id);
1.1.1.2 misho 825: parse_filter_file(&daemon_filter_list, p, rule_template(0),
1.1.1.4 ! misho 826: XFLG_ABS_IF_SLASH | XFLG_DIR2WILD3 | XFLG_OLD_PREFIXES | XFLG_FATAL_ERRORS);
1.1 misho 827:
1.1.1.4 ! misho 828: p = lp_exclude(module_id);
1.1.1.2 misho 829: parse_filter_str(&daemon_filter_list, p, rule_template(FILTRULE_WORD_SPLIT),
1.1.1.4 ! misho 830: XFLG_ABS_IF_SLASH | XFLG_DIR2WILD3 | XFLG_OLD_PREFIXES);
1.1 misho 831:
832: log_init(1);
833:
1.1.1.4 ! misho 834: if (*lp_db_config(i)) {
! 835: db_read_config(FLOG, lp_db_config(i));
! 836: db_lax = lp_db_lax(i);
! 837: }
! 838:
1.1 misho 839: #ifdef HAVE_PUTENV
1.1.1.4 ! misho 840: if ((*lp_early_exec(module_id) || *lp_prexfer_exec(module_id)
! 841: || *lp_postxfer_exec(module_id) || *lp_name_converter(module_id))
! 842: && !getenv("RSYNC_NO_XFER_EXEC")) {
! 843: set_env_num("RSYNC_PID", (long)getpid());
1.1 misho 844:
845: /* For post-xfer exec, fork a new process to run the rsync
846: * daemon while this process waits for the exit status and
847: * runs the indicated command at that point. */
1.1.1.4 ! misho 848: if (*lp_postxfer_exec(module_id)) {
1.1 misho 849: pid_t pid = fork();
850: if (pid < 0) {
851: rsyserr(FLOG, errno, "fork failed");
852: io_printf(f_out, "@ERROR: fork failed\n");
853: return -1;
854: }
855: if (pid) {
1.1.1.4 ! misho 856: int status;
1.1.1.2 misho 857: close(f_in);
858: if (f_out != f_in)
859: close(f_out);
1.1 misho 860: if (wait_process(pid, &status, 0) < 0)
861: status = -1;
1.1.1.2 misho 862: set_env_num("RSYNC_RAW_STATUS", status);
1.1 misho 863: if (WIFEXITED(status))
864: status = WEXITSTATUS(status);
865: else
866: status = -1;
1.1.1.2 misho 867: set_env_num("RSYNC_EXIT_STATUS", status);
1.1.1.4 ! misho 868: if (shell_exec(lp_postxfer_exec(module_id)) < 0)
1.1 misho 869: status = -1;
870: _exit(status);
871: }
872: }
1.1.1.4 ! misho 873:
! 874: /* For early exec, fork a child process to run the indicated
! 875: * command and wait for it to exit. */
! 876: if (*lp_early_exec(module_id)) {
! 877: int arg_fd;
! 878: pid_t pid = start_pre_exec(lp_early_exec(module_id), &arg_fd, NULL);
! 879: if (pid == (pid_t)-1) {
! 880: rsyserr(FLOG, errno, "early exec preparation failed");
! 881: io_printf(f_out, "@ERROR: early exec preparation failed\n");
! 882: return -1;
! 883: }
! 884: write_pre_exec_args(arg_fd, NULL, NULL, NULL, 1);
! 885: if (finish_pre_exec("early exec", pid, -1) != NULL) {
! 886: rsyserr(FLOG, errno, "early exec failed");
! 887: io_printf(f_out, "@ERROR: early exec failed\n");
! 888: return -1;
! 889: }
! 890: }
! 891:
1.1 misho 892: /* For pre-xfer exec, fork a child process to run the indicated
893: * command, though it first waits for the parent process to
894: * send us the user's request via a pipe. */
1.1.1.4 ! misho 895: if (*lp_prexfer_exec(module_id)) {
! 896: pre_exec_pid = start_pre_exec(lp_prexfer_exec(module_id), &pre_exec_arg_fd, &pre_exec_error_fd);
! 897: if (pre_exec_pid == (pid_t)-1) {
1.1 misho 898: rsyserr(FLOG, errno, "pre-xfer exec preparation failed");
899: io_printf(f_out, "@ERROR: pre-xfer exec preparation failed\n");
900: return -1;
901: }
1.1.1.4 ! misho 902: }
! 903:
! 904: if (*lp_name_converter(module_id)) {
! 905: namecvt_pid = start_pre_exec(lp_name_converter(module_id), &namecvt_fd_req, &namecvt_fd_ans);
! 906: if (namecvt_pid == (pid_t)-1) {
! 907: rsyserr(FLOG, errno, "name-converter exec preparation failed");
! 908: io_printf(f_out, "@ERROR: name-converter exec preparation failed\n");
! 909: return -1;
1.1 misho 910: }
911: }
912: }
913: #endif
914:
1.1.1.4 ! misho 915: if (early_input) {
! 916: free(early_input);
! 917: early_input = NULL;
! 918: }
! 919:
1.1 misho 920: if (use_chroot) {
921: /*
922: * XXX: The 'use chroot' flag is a fairly reliable
923: * source of confusion, because it fails under two
924: * important circumstances: running as non-root,
925: * running on Win32 (or possibly others). On the
926: * other hand, if you are running as root, then it
927: * might be better to always use chroot.
928: *
929: * So, perhaps if we can't chroot we should just issue
930: * a warning, unless a "require chroot" flag is set,
931: * in which case we fail.
932: */
933: if (chroot(module_chdir)) {
934: rsyserr(FLOG, errno, "chroot %s failed", module_chdir);
935: io_printf(f_out, "@ERROR: chroot failed\n");
936: return -1;
937: }
938: module_chdir = module_dir;
939: }
940:
941: if (!change_dir(module_chdir, CD_NORMAL))
942: return path_failure(f_out, module_chdir, True);
1.1.1.4 ! misho 943: if (module_dirlen || (!use_chroot && !*lp_daemon_chroot()))
1.1 misho 944: sanitize_paths = 1;
945:
1.1.1.4 ! misho 946: if ((munge_symlinks = lp_munge_symlinks(module_id)) < 0)
1.1 misho 947: munge_symlinks = !use_chroot || module_dirlen;
948: if (munge_symlinks) {
949: STRUCT_STAT st;
1.1.1.2 misho 950: char prefix[SYMLINK_PREFIX_LEN]; /* NOT +1 ! */
951: strlcpy(prefix, SYMLINK_PREFIX, sizeof prefix); /* trim the trailing slash */
952: if (do_stat(prefix, &st) == 0 && S_ISDIR(st.st_mode)) {
953: rprintf(FLOG, "Symlink munging is unsafe when a %s directory exists.\n",
954: prefix);
1.1 misho 955: io_printf(f_out, "@ERROR: daemon security issue -- contact admin\n", name);
956: exit_cleanup(RERR_UNSUPPORTED);
957: }
958: }
959:
1.1.1.3 misho 960: if (gid_list.count) {
961: gid_t *gid_array = gid_list.items;
962: if (setgid(gid_array[0])) {
963: rsyserr(FLOG, errno, "setgid %ld failed", (long)gid_array[0]);
1.1 misho 964: io_printf(f_out, "@ERROR: setgid failed\n");
965: return -1;
966: }
967: #ifdef HAVE_SETGROUPS
1.1.1.2 misho 968: /* Set the group(s) we want to be active. */
1.1.1.3 misho 969: if (setgroups(gid_list.count, gid_array)) {
1.1 misho 970: rsyserr(FLOG, errno, "setgroups failed");
971: io_printf(f_out, "@ERROR: setgroups failed\n");
972: return -1;
973: }
974: #endif
1.1.1.2 misho 975: #if defined HAVE_INITGROUPS && !defined HAVE_GETGROUPLIST
976: /* pw is set if the user wants all the user's groups. */
977: if (pw && initgroups(pw->pw_name, pw->pw_gid) < 0) {
978: rsyserr(FLOG, errno, "initgroups failed");
979: io_printf(f_out, "@ERROR: initgroups failed\n");
980: return -1;
981: }
982: #endif
1.1.1.4 ! misho 983: our_gid = MY_GID();
1.1.1.2 misho 984: }
1.1 misho 985:
1.1.1.2 misho 986: if (set_uid) {
1.1 misho 987: if (setuid(uid) < 0
988: #ifdef HAVE_SETEUID
989: || seteuid(uid) < 0
990: #endif
991: ) {
1.1.1.2 misho 992: rsyserr(FLOG, errno, "setuid %ld failed", (long)uid);
1.1 misho 993: io_printf(f_out, "@ERROR: setuid failed\n");
994: return -1;
995: }
996:
1.1.1.4 ! misho 997: our_uid = MY_UID();
! 998: am_root = (our_uid == ROOT_UID);
1.1 misho 999: }
1000:
1.1.1.4 ! misho 1001: if (lp_temp_dir(module_id) && *lp_temp_dir(module_id)) {
! 1002: tmpdir = lp_temp_dir(module_id);
1.1 misho 1003: if (strlen(tmpdir) >= MAXPATHLEN - 10) {
1004: rprintf(FLOG,
1005: "the 'temp dir' value for %s is WAY too long -- ignoring.\n",
1006: name);
1007: tmpdir = NULL;
1008: }
1009: }
1010:
1011: io_printf(f_out, "@RSYNCD: OK\n");
1012:
1013: read_args(f_in, name, line, sizeof line, rl_nulls, &argv, &argc, &request);
1014: orig_argv = argv;
1015:
1.1.1.2 misho 1016: save_munge_symlinks = munge_symlinks;
1017:
1018: reset_output_levels(); /* future verbosity is controlled by client options */
1.1 misho 1019: ret = parse_arguments(&argc, (const char ***) &argv);
1020: if (protect_args && ret) {
1021: orig_early_argv = orig_argv;
1022: protect_args = 2;
1023: read_args(f_in, name, line, sizeof line, 1, &argv, &argc, &request);
1024: orig_argv = argv;
1025: ret = parse_arguments(&argc, (const char ***) &argv);
1026: } else
1027: orig_early_argv = NULL;
1028:
1.1.1.4 ! misho 1029: /* The default is to use the user's setting unless the module sets True or False. */
! 1030: if (lp_open_noatime(module_id) >= 0)
! 1031: open_noatime = lp_open_noatime(module_id);
! 1032:
1.1.1.2 misho 1033: munge_symlinks = save_munge_symlinks; /* The client mustn't control this. */
1034:
1.1.1.4 ! misho 1035: if (am_daemon > 0)
! 1036: msgs2stderr = 0; /* A non-rsh-run daemon doesn't have stderr for msgs. */
! 1037:
1.1 misho 1038: if (pre_exec_pid) {
1.1.1.4 ! misho 1039: write_pre_exec_args(pre_exec_arg_fd, request, orig_early_argv, orig_argv, 0);
! 1040: err_msg = finish_pre_exec("pre-xfer exec", pre_exec_pid, pre_exec_error_fd);
1.1 misho 1041: }
1042:
1.1.1.4 ! misho 1043: if (namecvt_pid)
! 1044: write_pre_exec_args(namecvt_fd_req, request, orig_early_argv, orig_argv, 2);
! 1045:
1.1 misho 1046: if (orig_early_argv)
1047: free(orig_early_argv);
1048:
1049: am_server = 1; /* Don't let someone try to be tricky. */
1050: quiet = 0;
1.1.1.4 ! misho 1051: db_config = NULL;
! 1052:
1.1 misho 1053: if (lp_ignore_errors(module_id))
1054: ignore_errors = 1;
1055: if (write_batch < 0)
1056: dry_run = 1;
1057:
1.1.1.4 ! misho 1058: if (lp_fake_super(module_id)) {
1.1 misho 1059: if (preserve_xattrs > 1)
1060: preserve_xattrs = 1;
1061: am_root = -1;
1062: } else if (am_root < 0) /* Treat --fake-super from client as --super. */
1063: am_root = 2;
1064:
1.1.1.4 ! misho 1065: checksum_files = always_checksum ? lp_checksum_files(i)
! 1066: : CSF_IGNORE_FILES;
! 1067:
1.1 misho 1068: if (filesfrom_fd == 0)
1069: filesfrom_fd = f_in;
1070:
1071: if (request) {
1072: if (*auth_user) {
1073: rprintf(FLOG, "rsync %s %s from %s@%s (%s)\n",
1074: am_sender ? "on" : "to",
1075: request, auth_user, host, addr);
1076: } else {
1077: rprintf(FLOG, "rsync %s %s from %s (%s)\n",
1078: am_sender ? "on" : "to",
1079: request, host, addr);
1080: }
1081: free(request);
1082: }
1083:
1084: #ifndef DEBUG
1085: /* don't allow the logs to be flooded too fast */
1.1.1.4 ! misho 1086: limit_output_verbosity(lp_max_verbosity(module_id));
1.1 misho 1087: #endif
1088:
1.1.1.4 ! misho 1089: if (protocol_version < 23 && (protocol_version == 22 || am_sender))
1.1.1.2 misho 1090: io_start_multiplex_out(f_out);
1.1 misho 1091: else if (!ret || err_msg) {
1092: /* We have to get I/O multiplexing started so that we can
1093: * get the error back to the client. This means getting
1094: * the protocol setup finished first in later versions. */
1095: setup_protocol(f_out, f_in);
1096: if (!am_sender) {
1097: /* Since we failed in our option parsing, we may not
1098: * have finished parsing that the client sent us a
1099: * --files-from option, so look for it manually.
1100: * Without this, the socket would be in the wrong
1101: * state for the upcoming error message. */
1102: if (!files_from) {
1103: int i;
1104: for (i = 0; i < argc; i++) {
1105: if (strncmp(argv[i], "--files-from", 12) == 0) {
1106: files_from = "";
1107: break;
1108: }
1109: }
1110: }
1111: if (files_from)
1112: write_byte(f_out, 0);
1113: }
1.1.1.2 misho 1114: io_start_multiplex_out(f_out);
1.1 misho 1115: }
1116:
1117: if (!ret || err_msg) {
1.1.1.2 misho 1118: if (err_msg) {
1119: while ((p = strchr(err_msg, '\n')) != NULL) {
1120: int len = p - err_msg + 1;
1121: rwrite(FERROR, err_msg, len, 0);
1122: err_msg += len;
1123: }
1124: if (*err_msg)
1125: rprintf(FERROR, "%s\n", err_msg);
1.1.1.4 ! misho 1126: io_flush(MSG_FLUSH);
1.1.1.2 misho 1127: } else
1.1 misho 1128: option_error();
1129: msleep(400);
1130: exit_cleanup(RERR_UNSUPPORTED);
1131: }
1132:
1133: #ifdef ICONV_OPTION
1134: if (!iconv_opt) {
1135: if (ic_send != (iconv_t)-1) {
1136: iconv_close(ic_send);
1137: ic_send = (iconv_t)-1;
1138: }
1139: if (ic_recv != (iconv_t)-1) {
1140: iconv_close(ic_recv);
1141: ic_recv = (iconv_t)-1;
1142: }
1143: }
1144: #endif
1145:
1146: if (!numeric_ids
1.1.1.4 ! misho 1147: && (use_chroot ? lp_numeric_ids(module_id) != False && !*lp_name_converter(module_id)
! 1148: : lp_numeric_ids(module_id) == True))
1.1 misho 1149: numeric_ids = -1; /* Set --numeric-ids w/o breaking protocol. */
1150:
1.1.1.4 ! misho 1151: if (lp_timeout(module_id) && (!io_timeout || lp_timeout(module_id) < io_timeout))
! 1152: set_io_timeout(lp_timeout(module_id));
1.1 misho 1153:
1154: /* If we have some incoming/outgoing chmod changes, append them to
1155: * any user-specified changes (making our changes have priority).
1156: * We also get a pointer to just our changes so that a receiver
1157: * process can use them separately if --perms wasn't specified. */
1158: if (am_sender)
1.1.1.4 ! misho 1159: p = lp_outgoing_chmod(module_id);
1.1 misho 1160: else
1.1.1.4 ! misho 1161: p = lp_incoming_chmod(module_id);
1.1 misho 1162: if (*p && !(daemon_chmod_modes = parse_chmod(p, &chmod_modes))) {
1163: rprintf(FLOG, "Invalid \"%sing chmod\" directive: %s\n",
1164: am_sender ? "outgo" : "incom", p);
1165: }
1166:
1167: start_server(f_in, f_out, argc, argv);
1168:
1169: return 0;
1170: }
1171:
1.1.1.4 ! misho 1172: BOOL namecvt_call(const char *cmd, const char **name_p, id_t *id_p)
! 1173: {
! 1174: char buf[1024];
! 1175: int got, len;
! 1176:
! 1177: if (*name_p)
! 1178: len = snprintf(buf, sizeof buf, "%s %s\n", cmd, *name_p);
! 1179: else
! 1180: len = snprintf(buf, sizeof buf, "%s %ld\n", cmd, (long)*id_p);
! 1181: if (len >= (int)sizeof buf) {
! 1182: rprintf(FERROR, "namecvt_call() request was too large.\n");
! 1183: exit_cleanup(RERR_UNSUPPORTED);
! 1184: }
! 1185:
! 1186: while ((got = write(namecvt_fd_req, buf, len)) != len) {
! 1187: if (got < 0 && errno == EINTR)
! 1188: continue;
! 1189: rprintf(FERROR, "Connection to name-converter failed.\n");
! 1190: exit_cleanup(RERR_SOCKETIO);
! 1191: }
! 1192:
! 1193: if (!read_line_old(namecvt_fd_ans, buf, sizeof buf, 0))
! 1194: return False;
! 1195:
! 1196: if (*name_p)
! 1197: *id_p = (id_t)atol(buf);
! 1198: else
! 1199: *name_p = strdup(buf);
! 1200:
! 1201: return True;
! 1202: }
! 1203:
1.1 misho 1204: /* send a list of available modules to the client. Don't list those
1205: with "list = False". */
1206: static void send_listing(int fd)
1207: {
1.1.1.2 misho 1208: int n = lp_num_modules();
1.1 misho 1209: int i;
1210:
1211: for (i = 0; i < n; i++) {
1212: if (lp_list(i))
1213: io_printf(fd, "%-15s\t%s\n", lp_name(i), lp_comment(i));
1214: }
1215:
1216: if (protocol_version >= 25)
1217: io_printf(fd,"@RSYNCD: EXIT\n");
1218: }
1219:
1220: static int load_config(int globals_only)
1221: {
1222: if (!config_file) {
1.1.1.4 ! misho 1223: if (am_daemon < 0 && am_root <= 0)
1.1 misho 1224: config_file = RSYNCD_USERCONF;
1225: else
1226: config_file = RSYNCD_SYSCONF;
1227: }
1228: return lp_load(config_file, globals_only);
1229: }
1230:
1231: /* this is called when a connection is established to a client
1232: and we want to start talking. The setup of the system is done from
1233: here */
1234: int start_daemon(int f_in, int f_out)
1235: {
1236: char line[1024];
1.1.1.2 misho 1237: const char *addr, *host;
1.1.1.4 ! misho 1238: char *p;
1.1 misho 1239: int i;
1240:
1.1.1.4 ! misho 1241: /* At this point, am_server is only set for a daemon started via rsh.
! 1242: * Because am_server gets forced on soon, we'll set am_daemon to -1 as
! 1243: * a flag that can be checked later on to distinguish a normal daemon
! 1244: * from an rsh-run daemon. */
! 1245: if (am_server)
! 1246: am_daemon = -1;
! 1247:
1.1 misho 1248: io_set_sock_fds(f_in, f_out);
1249:
1250: /* We must load the config file before calling any function that
1251: * might cause log-file output to occur. This ensures that the
1252: * "log file" param gets honored for the 2 non-forked use-cases
1253: * (when rsync is run by init and run by a remote shell). */
1254: if (!load_config(0))
1255: exit_cleanup(RERR_SYNTAX);
1256:
1.1.1.4 ! misho 1257: if (lp_proxy_protocol() && !read_proxy_protocol_header(f_in))
! 1258: return -1;
! 1259:
! 1260: p = lp_daemon_chroot();
! 1261: if (*p) {
! 1262: log_init(0); /* Make use we've initialized syslog before chrooting. */
! 1263: if (chroot(p) < 0 || chdir("/") < 0) {
! 1264: rsyserr(FLOG, errno, "daemon chroot %s failed", p);
! 1265: return -1;
! 1266: }
! 1267: }
! 1268: p = lp_daemon_gid();
! 1269: if (*p) {
! 1270: gid_t gid;
! 1271: if (!group_to_gid(p, &gid, True)) {
! 1272: rprintf(FLOG, "Invalid daemon gid: %s\n", p);
! 1273: return -1;
! 1274: }
! 1275: if (setgid(gid) < 0) {
! 1276: rsyserr(FLOG, errno, "Unable to set group to daemon gid %ld", (long)gid);
! 1277: return -1;
! 1278: }
! 1279: our_gid = MY_GID();
! 1280: }
! 1281: p = lp_daemon_uid();
! 1282: if (*p) {
! 1283: uid_t uid;
! 1284: if (!user_to_uid(p, &uid, True)) {
! 1285: rprintf(FLOG, "Invalid daemon uid: %s\n", p);
! 1286: return -1;
! 1287: }
! 1288: if (setuid(uid) < 0) {
! 1289: rsyserr(FLOG, errno, "Unable to set user to daemon uid %ld", (long)uid);
! 1290: return -1;
! 1291: }
! 1292: our_uid = MY_UID();
! 1293: am_root = (our_uid == ROOT_UID);
! 1294: }
! 1295:
1.1 misho 1296: addr = client_addr(f_in);
1.1.1.4 ! misho 1297: host = lp_reverse_lookup(-1) ? client_name(addr) : undetermined_hostname;
1.1 misho 1298: rprintf(FLOG, "connect from %s (%s)\n", host, addr);
1299:
1.1.1.4 ! misho 1300: if (am_daemon > 0) {
1.1 misho 1301: set_socket_options(f_in, "SO_KEEPALIVE");
1302: set_nonblocking(f_in);
1303: }
1304:
1305: if (exchange_protocols(f_in, f_out, line, sizeof line, 0) < 0)
1306: return -1;
1307:
1308: line[0] = 0;
1.1.1.2 misho 1309: if (!read_line_old(f_in, line, sizeof line, 0))
1.1 misho 1310: return -1;
1311:
1.1.1.4 ! misho 1312: if (strncmp(line, EARLY_INPUT_CMD, EARLY_INPUT_CMDLEN) == 0) {
! 1313: early_input_len = strtol(line + EARLY_INPUT_CMDLEN, NULL, 10);
! 1314: if (early_input_len <= 0 || early_input_len > BIGPATHBUFLEN) {
! 1315: io_printf(f_out, "@ERROR: invalid early_input length\n");
! 1316: return -1;
! 1317: }
! 1318: early_input = new_array(char, early_input_len);
! 1319: read_buf(f_in, early_input, early_input_len);
! 1320:
! 1321: if (!read_line_old(f_in, line, sizeof line, 0))
! 1322: return -1;
! 1323: }
! 1324:
1.1 misho 1325: if (!*line || strcmp(line, "#list") == 0) {
1326: rprintf(FLOG, "module-list request from %s (%s)\n",
1327: host, addr);
1328: send_listing(f_out);
1329: return -1;
1330: }
1331:
1332: if (*line == '#') {
1333: /* it's some sort of command that I don't understand */
1334: io_printf(f_out, "@ERROR: Unknown command '%s'\n", line);
1335: return -1;
1336: }
1337:
1338: if ((i = lp_number(line)) < 0) {
1339: rprintf(FLOG, "unknown module '%s' tried from %s (%s)\n",
1340: line, host, addr);
1341: io_printf(f_out, "@ERROR: Unknown module '%s'\n", line);
1342: return -1;
1343: }
1344:
1345: #ifdef HAVE_SIGACTION
1346: sigact.sa_flags = SA_NOCLDSTOP;
1347: #endif
1348: SIGACTION(SIGCHLD, remember_children);
1349:
1350: return rsync_module(f_in, f_out, i, addr, host);
1351: }
1352:
1353: static void create_pid_file(void)
1354: {
1355: char *pid_file = lp_pid_file();
1.1.1.4 ! misho 1356: char pidbuf[32];
! 1357: STRUCT_STAT st1, st2;
! 1358: char *fail = NULL;
1.1 misho 1359:
1360: if (!pid_file || !*pid_file)
1361: return;
1362:
1.1.1.4 ! misho 1363: #ifdef O_NOFOLLOW
! 1364: #define SAFE_OPEN_FLAGS (O_CREAT|O_NOFOLLOW)
! 1365: #else
! 1366: #define SAFE_OPEN_FLAGS (O_CREAT)
! 1367: #endif
! 1368:
! 1369: /* These tests make sure that a temp-style lock dir is handled safely. */
! 1370: st1.st_mode = 0;
! 1371: if (do_lstat(pid_file, &st1) == 0 && !S_ISREG(st1.st_mode) && unlink(pid_file) < 0)
! 1372: fail = "unlink";
! 1373: else if ((pid_file_fd = do_open(pid_file, O_RDWR|SAFE_OPEN_FLAGS, 0664)) < 0)
! 1374: fail = S_ISREG(st1.st_mode) ? "open" : "create";
! 1375: else if (!lock_range(pid_file_fd, 0, 4))
! 1376: fail = "lock";
! 1377: else if (do_fstat(pid_file_fd, &st1) < 0)
! 1378: fail = "fstat opened";
! 1379: else if (st1.st_size > (int)sizeof pidbuf)
! 1380: fail = "find small";
! 1381: else if (do_lstat(pid_file, &st2) < 0)
! 1382: fail = "lstat";
! 1383: else if (!S_ISREG(st1.st_mode))
! 1384: fail = "avoid file overwrite race for";
! 1385: else if (st1.st_dev != st2.st_dev || st1.st_ino != st2.st_ino)
! 1386: fail = "verify stat info for";
! 1387: #ifdef HAVE_FTRUNCATE
! 1388: else if (do_ftruncate(pid_file_fd, 0) < 0)
! 1389: fail = "truncate";
! 1390: #endif
! 1391: else {
! 1392: pid_t pid = getpid();
! 1393: int len = snprintf(pidbuf, sizeof pidbuf, "%d\n", (int)pid);
! 1394: #ifndef HAVE_FTRUNCATE
! 1395: /* What can we do with a too-long file and no truncate? I guess we'll add extra newlines. */
! 1396: while (len < st1.st_size) /* We already verified that st_size chars fits in the buffer. */
! 1397: pidbuf[len++] = '\n';
! 1398: /* We don't need the buffer to end in a '\0' (and we may not have room to add it). */
! 1399: #endif
! 1400: if (write(pid_file_fd, pidbuf, len) != len)
! 1401: fail = "write";
! 1402: cleanup_set_pid(pid); /* Mark the file for removal on exit, even if the write failed. */
! 1403: }
! 1404:
! 1405: if (fail) {
! 1406: char msg[1024];
! 1407: snprintf(msg, sizeof msg, "failed to %s pid file %s: %s\n",
! 1408: fail, pid_file, strerror(errno));
! 1409: fputs(msg, stderr);
! 1410: rprintf(FLOG, "%s", msg);
1.1 misho 1411: exit_cleanup(RERR_FILEIO);
1412: }
1.1.1.4 ! misho 1413:
! 1414: /* The file is left open so that the lock remains valid. It is closed in our forked child procs. */
1.1 misho 1415: }
1416:
1417: /* Become a daemon, discarding the controlling terminal. */
1418: static void become_daemon(void)
1419: {
1420: int i;
1421: pid_t pid = fork();
1422:
1423: if (pid) {
1424: if (pid < 0) {
1425: fprintf(stderr, "failed to fork: %s\n", strerror(errno));
1426: exit_cleanup(RERR_FILEIO);
1427: }
1428: _exit(0);
1429: }
1430:
1431: create_pid_file();
1432:
1433: /* detach from the terminal */
1434: #ifdef HAVE_SETSID
1435: setsid();
1436: #elif defined TIOCNOTTY
1437: i = open("/dev/tty", O_RDWR);
1438: if (i >= 0) {
1439: ioctl(i, (int)TIOCNOTTY, (char *)0);
1440: close(i);
1441: }
1442: #endif
1443: /* make sure that stdin, stdout an stderr don't stuff things
1444: * up (library functions, for example) */
1445: for (i = 0; i < 3; i++) {
1446: close(i);
1447: open("/dev/null", O_RDWR);
1448: }
1449: }
1450:
1451: int daemon_main(void)
1452: {
1453: if (is_a_socket(STDIN_FILENO)) {
1454: int i;
1455:
1456: /* we are running via inetd - close off stdout and
1457: * stderr so that library functions (and getopt) don't
1458: * try to use them. Redirect them to /dev/null */
1459: for (i = 1; i < 3; i++) {
1460: close(i);
1461: open("/dev/null", O_RDWR);
1462: }
1463:
1464: return start_daemon(STDIN_FILENO, STDIN_FILENO);
1465: }
1466:
1467: if (!load_config(1)) {
1468: fprintf(stderr, "Failed to parse config file: %s\n", config_file);
1469: exit_cleanup(RERR_SYNTAX);
1470: }
1.1.1.2 misho 1471: set_dparams(0);
1.1 misho 1472:
1473: if (no_detach)
1474: create_pid_file();
1475: else
1476: become_daemon();
1477:
1478: if (rsync_port == 0 && (rsync_port = lp_rsync_port()) == 0)
1479: rsync_port = RSYNC_PORT;
1480: if (bind_address == NULL && *lp_bind_address())
1481: bind_address = lp_bind_address();
1482:
1483: log_init(0);
1484:
1485: rprintf(FLOG, "rsyncd version %s starting, listening on port %d\n",
1.1.1.4 ! misho 1486: rsync_version(), rsync_port);
1.1 misho 1487: /* TODO: If listening on a particular address, then show that
1488: * address too. In fact, why not just do getnameinfo on the
1489: * local address??? */
1490:
1.1.1.4 ! misho 1491: #ifdef HAVE_LIBSLP
! 1492: if (lp_use_slp() && register_services()) {
! 1493: rprintf(FINFO,
! 1494: "Couldn't register with service discovery protocol, continuing anyway\n");
! 1495: }
! 1496: #endif
! 1497:
1.1 misho 1498: start_accept_loop(rsync_port, start_daemon);
1499: return -1;
1500: }
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to clientserver.c CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / rsync