Annotation of embedaddon/rsync/io.c, revision 1.1.1.4
1.1 misho 1: /*
2: * Socket and pipe I/O utilities used in rsync.
3: *
4: * Copyright (C) 1996-2001 Andrew Tridgell
5: * Copyright (C) 1996 Paul Mackerras
6: * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
1.1.1.4 ! misho 7: * Copyright (C) 2003-2020 Wayne Davison
1.1 misho 8: *
9: * This program is free software; you can redistribute it and/or modify
10: * it under the terms of the GNU General Public License as published by
11: * the Free Software Foundation; either version 3 of the License, or
12: * (at your option) any later version.
13: *
14: * This program is distributed in the hope that it will be useful,
15: * but WITHOUT ANY WARRANTY; without even the implied warranty of
16: * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: * GNU General Public License for more details.
18: *
19: * You should have received a copy of the GNU General Public License along
20: * with this program; if not, visit the http://fsf.org website.
21: */
22:
23: /* Rsync provides its own multiplexing system, which is used to send
24: * stderr and stdout over a single socket.
25: *
26: * For historical reasons this is off during the start of the
27: * connection, but it's switched on quite early using
28: * io_start_multiplex_out() and io_start_multiplex_in(). */
29:
30: #include "rsync.h"
31: #include "ifuncs.h"
1.1.1.2 misho 32: #include "inums.h"
1.1 misho 33:
34: /** If no timeout is specified then use a 60 second select timeout */
35: #define SELECT_TIMEOUT 60
36:
37: extern int bwlimit;
38: extern size_t bwlimit_writemax;
39: extern int io_timeout;
40: extern int am_server;
41: extern int am_sender;
1.1.1.2 misho 42: extern int am_receiver;
1.1 misho 43: extern int am_generator;
1.1.1.4 ! misho 44: extern int local_server;
1.1.1.2 misho 45: extern int msgs2stderr;
1.1 misho 46: extern int inc_recurse;
1.1.1.4 ! misho 47: extern int same_db;
1.1 misho 48: extern int io_error;
1.1.1.4 ! misho 49: extern int batch_fd;
1.1 misho 50: extern int eol_nulls;
51: extern int flist_eof;
1.1.1.2 misho 52: extern int file_total;
53: extern int file_old_total;
1.1 misho 54: extern int list_only;
55: extern int read_batch;
56: extern int compat_flags;
57: extern int protect_args;
58: extern int checksum_seed;
1.1.1.4 ! misho 59: extern int checksum_files;
! 60: extern int daemon_connection;
1.1 misho 61: extern int protocol_version;
62: extern int remove_source_files;
63: extern int preserve_hard_links;
1.1.1.2 misho 64: extern BOOL extra_flist_sending_enabled;
65: extern BOOL flush_ok_after_signal;
1.1 misho 66: extern struct stats stats;
1.1.1.4 ! misho 67: extern time_t stop_at_utime;
1.1 misho 68: extern struct file_list *cur_flist;
69: #ifdef ICONV_OPTION
70: extern int filesfrom_convert;
71: extern iconv_t ic_send, ic_recv;
72: #endif
73:
74: int csum_length = SHORT_SUM_LENGTH; /* initial value */
75: int allowed_lull = 0;
76: int msgdone_cnt = 0;
1.1.1.2 misho 77: int forward_flist_data = 0;
78: BOOL flist_receiving_enabled = False;
1.1 misho 79:
80: /* Ignore an EOF error if non-zero. See whine_about_eof(). */
81: int kluge_around_eof = 0;
1.1.1.2 misho 82: int got_kill_signal = -1; /* is set to 0 only after multiplexed I/O starts */
1.1 misho 83:
84: int sock_f_in = -1;
85: int sock_f_out = -1;
86:
1.1.1.2 misho 87: int64 total_data_read = 0;
88: int64 total_data_written = 0;
1.1 misho 89:
1.1.1.2 misho 90: static struct {
91: xbuf in, out, msg;
92: int in_fd;
93: int out_fd; /* Both "out" and "msg" go to this fd. */
94: int in_multiplexed;
95: unsigned out_empty_len;
96: size_t raw_data_header_pos; /* in the out xbuf */
97: size_t raw_flushing_ends_before; /* in the out xbuf */
98: size_t raw_input_ends_before; /* in the in xbuf */
99: } iobuf = { .in_fd = -1, .out_fd = -1 };
1.1 misho 100:
101: static time_t last_io_in;
102: static time_t last_io_out;
103:
104: static int write_batch_monitor_in = -1;
105: static int write_batch_monitor_out = -1;
106:
1.1.1.2 misho 107: static int ff_forward_fd = -1;
108: static int ff_reenable_multiplex = -1;
109: static char ff_lastchar = '\0';
110: static xbuf ff_xb = EMPTY_XBUF;
1.1 misho 111: #ifdef ICONV_OPTION
112: static xbuf iconv_buf = EMPTY_XBUF;
113: #endif
114: static int select_timeout = SELECT_TIMEOUT;
115: static int active_filecnt = 0;
116: static OFF_T active_bytecnt = 0;
117: static int first_message = 1;
118:
119: static char int_byte_extra[64] = {
120: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
121: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
122: 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
123: 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
124: };
125:
1.1.1.2 misho 126: /* Our I/O buffers are sized with no bits on in the lowest byte of the "size"
127: * (indeed, our rounding of sizes in 1024-byte units assures more than this).
128: * This allows the code that is storing bytes near the physical end of a
129: * circular buffer to temporarily reduce the buffer's size (in order to make
130: * some storing idioms easier), while also making it simple to restore the
131: * buffer's actual size when the buffer's "pos" wraps around to the start (we
132: * just round the buffer's size up again). */
133:
134: #define IOBUF_WAS_REDUCED(siz) ((siz) & 0xFF)
135: #define IOBUF_RESTORE_SIZE(siz) (((siz) | 0xFF) + 1)
136:
137: #define IN_MULTIPLEXED (iobuf.in_multiplexed != 0)
138: #define IN_MULTIPLEXED_AND_READY (iobuf.in_multiplexed > 0)
139: #define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
140:
141: #define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
142: #define PIO_NEED_OUTROOM (1<<1)
143: #define PIO_NEED_MSGROOM (1<<2)
144:
145: #define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
146:
147: #define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
148: #define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
149:
1.1 misho 150: #define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
151: #define REMOTE_OPTION_ERROR2 ": unknown option"
152:
1.1.1.2 misho 153: #define FILESFROM_BUFLEN 2048
154:
1.1 misho 155: enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
156:
1.1.1.2 misho 157: static flist_ndx_list redo_list, hlink_list;
158:
159: static void read_a_msg(void);
160: static void drain_multiplex_messages(void);
161: static void sleep_for_bwlimit(int bytes_written);
162:
1.1.1.3 misho 163: static void check_timeout(BOOL allow_keepalive, int keepalive_flags)
1.1.1.2 misho 164: {
165: time_t t, chk;
166:
167: /* On the receiving side, the generator is now the one that decides
168: * when a timeout has occurred. When it is sifting through a lot of
169: * files looking for work, it will be sending keep-alive messages to
170: * the sender, and even though the receiver won't be sending/receiving
171: * anything (not even keep-alive messages), the successful writes to
172: * the sender will keep things going. If the receiver is actively
173: * receiving data, it will ensure that the generator knows that it is
174: * not idle by sending the generator keep-alive messages (since the
175: * generator might be blocked trying to send checksums, it needs to
176: * know that the receiver is active). Thus, as long as one or the
177: * other is successfully doing work, the generator will not timeout. */
178: if (!io_timeout)
179: return;
180:
181: t = time(NULL);
182:
183: if (allow_keepalive) {
184: /* This may put data into iobuf.msg w/o flushing. */
1.1.1.3 misho 185: maybe_send_keepalive(t, keepalive_flags);
1.1.1.2 misho 186: }
187:
188: if (!last_io_in)
189: last_io_in = t;
190:
191: if (am_receiver)
192: return;
193:
194: chk = MAX(last_io_out, last_io_in);
195: if (t - chk >= io_timeout) {
196: if (am_server)
197: msgs2stderr = 1;
198: rprintf(FERROR, "[%s] io timeout after %d seconds -- exiting\n",
199: who_am_i(), (int)(t-chk));
200: exit_cleanup(RERR_TIMEOUT);
201: }
202: }
203:
204: /* It's almost always an error to get an EOF when we're trying to read from the
205: * network, because the protocol is (for the most part) self-terminating.
206: *
207: * There is one case for the receiver when it is at the end of the transfer
208: * (hanging around reading any keep-alive packets that might come its way): if
209: * the sender dies before the generator's kill-signal comes through, we can end
210: * up here needing to loop until the kill-signal arrives. In this situation,
211: * kluge_around_eof will be < 0.
212: *
213: * There is another case for older protocol versions (< 24) where the module
214: * listing was not terminated, so we must ignore an EOF error in that case and
215: * exit. In this situation, kluge_around_eof will be > 0. */
216: static NORETURN void whine_about_eof(BOOL allow_kluge)
217: {
218: if (kluge_around_eof && allow_kluge) {
219: int i;
220: if (kluge_around_eof > 0)
221: exit_cleanup(0);
222: /* If we're still here after 10 seconds, exit with an error. */
223: for (i = 10*1000/20; i--; )
224: msleep(20);
225: }
226:
227: rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
228: "(%s bytes received so far) [%s]\n",
229: big_num(stats.total_read), who_am_i());
230:
231: exit_cleanup(RERR_STREAMIO);
232: }
233:
234: /* Do a safe read, handling any needed looping and error handling.
235: * Returns the count of the bytes read, which will only be different
236: * from "len" if we encountered an EOF. This routine is not used on
237: * the socket except very early in the transfer. */
238: static size_t safe_read(int fd, char *buf, size_t len)
239: {
1.1.1.3 misho 240: size_t got = 0;
1.1.1.2 misho 241:
242: assert(fd != iobuf.in_fd);
243:
244: while (1) {
245: struct timeval tv;
246: fd_set r_fds, e_fds;
247: int cnt;
248:
249: FD_ZERO(&r_fds);
250: FD_SET(fd, &r_fds);
251: FD_ZERO(&e_fds);
252: FD_SET(fd, &e_fds);
253: tv.tv_sec = select_timeout;
254: tv.tv_usec = 0;
255:
256: cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
257: if (cnt <= 0) {
258: if (cnt < 0 && errno == EBADF) {
1.1.1.4 ! misho 259: rsyserr(FERROR, errno, "safe_read select failed");
1.1.1.2 misho 260: exit_cleanup(RERR_FILEIO);
261: }
1.1.1.3 misho 262: check_timeout(1, MSK_ALLOW_FLUSH);
1.1.1.2 misho 263: continue;
264: }
265:
266: /*if (FD_ISSET(fd, &e_fds))
267: rprintf(FINFO, "select exception on fd %d\n", fd); */
268:
269: if (FD_ISSET(fd, &r_fds)) {
1.1.1.3 misho 270: int n = read(fd, buf + got, len - got);
1.1.1.2 misho 271: if (DEBUG_GTE(IO, 2))
272: rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
273: if (n == 0)
274: break;
275: if (n < 0) {
276: if (errno == EINTR)
277: continue;
1.1.1.4 ! misho 278: rsyserr(FERROR, errno, "safe_read failed to read %ld bytes", (long)len);
1.1.1.3 misho 279: exit_cleanup(RERR_STREAMIO);
1.1.1.2 misho 280: }
281: if ((got += (size_t)n) == len)
282: break;
283: }
284: }
285:
286: return got;
287: }
288:
289: static const char *what_fd_is(int fd)
290: {
291: static char buf[20];
292:
293: if (fd == sock_f_out)
294: return "socket";
295: else if (fd == iobuf.out_fd)
296: return "message fd";
297: else if (fd == batch_fd)
298: return "batch file";
299: else {
300: snprintf(buf, sizeof buf, "fd %d", fd);
301: return buf;
302: }
303: }
304:
305: /* Do a safe write, handling any needed looping and error handling.
306: * Returns only if everything was successfully written. This routine
307: * is not used on the socket except very early in the transfer. */
308: static void safe_write(int fd, const char *buf, size_t len)
309: {
310: int n;
311:
312: assert(fd != iobuf.out_fd);
313:
314: n = write(fd, buf, len);
315: if ((size_t)n == len)
316: return;
317: if (n < 0) {
318: if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
319: write_failed:
320: rsyserr(FERROR, errno,
1.1.1.4 ! misho 321: "safe_write failed to write %ld bytes to %s",
! 322: (long)len, what_fd_is(fd));
1.1.1.2 misho 323: exit_cleanup(RERR_STREAMIO);
324: }
325: } else {
326: buf += n;
327: len -= n;
328: }
329:
330: while (len) {
331: struct timeval tv;
332: fd_set w_fds;
333: int cnt;
334:
335: FD_ZERO(&w_fds);
336: FD_SET(fd, &w_fds);
337: tv.tv_sec = select_timeout;
338: tv.tv_usec = 0;
339:
340: cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
341: if (cnt <= 0) {
342: if (cnt < 0 && errno == EBADF) {
1.1.1.4 ! misho 343: rsyserr(FERROR, errno, "safe_write select failed on %s", what_fd_is(fd));
1.1.1.2 misho 344: exit_cleanup(RERR_FILEIO);
345: }
346: if (io_timeout)
347: maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
348: continue;
349: }
350:
351: if (FD_ISSET(fd, &w_fds)) {
352: n = write(fd, buf, len);
353: if (n < 0) {
354: if (errno == EINTR)
355: continue;
356: goto write_failed;
357: }
358: buf += n;
359: len -= n;
360: }
361: }
362: }
363:
364: /* This is only called when files-from data is known to be available. We read
365: * a chunk of data and put it into the output buffer. */
366: static void forward_filesfrom_data(void)
367: {
368: int len;
369:
370: len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
371: if (len <= 0) {
372: if (len == 0 || errno != EINTR) {
373: /* Send end-of-file marker */
374: ff_forward_fd = -1;
375: write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
376: free_xbuf(&ff_xb);
377: if (ff_reenable_multiplex >= 0)
378: io_start_multiplex_out(ff_reenable_multiplex);
379: }
380: return;
381: }
382:
383: if (DEBUG_GTE(IO, 2))
384: rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
385:
386: #ifdef ICONV_OPTION
387: len += ff_xb.len;
388: #endif
389:
390: if (!eol_nulls) {
391: char *s = ff_xb.buf + len;
392: /* Transform CR and/or LF into '\0' */
393: while (s-- > ff_xb.buf) {
394: if (*s == '\n' || *s == '\r')
395: *s = '\0';
396: }
397: }
398:
399: if (ff_lastchar)
400: ff_xb.pos = 0;
401: else {
402: char *s = ff_xb.buf;
403: /* Last buf ended with a '\0', so don't let this buf start with one. */
404: while (len && *s == '\0')
405: s++, len--;
406: ff_xb.pos = s - ff_xb.buf;
407: }
408:
409: #ifdef ICONV_OPTION
410: if (filesfrom_convert && len) {
411: char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
412: char *eob = sob + len;
413: int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
414: if (ff_lastchar == '\0')
415: flags |= ICB_INIT;
416: /* Convert/send each null-terminated string separately, skipping empties. */
417: while (s != eob) {
418: if (*s++ == '\0') {
419: ff_xb.len = s - sob - 1;
420: if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
421: exit_cleanup(RERR_PROTOCOL); /* impossible? */
422: write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
423: while (s != eob && *s == '\0')
424: s++;
425: sob = s;
426: ff_xb.pos = sob - ff_xb.buf;
427: flags |= ICB_INIT;
428: }
429: }
430:
431: if ((ff_xb.len = s - sob) == 0)
432: ff_lastchar = '\0';
433: else {
434: /* Handle a partial string specially, saving any incomplete chars. */
435: flags &= ~ICB_INCLUDE_INCOMPLETE;
436: if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
437: if (errno == E2BIG)
438: exit_cleanup(RERR_PROTOCOL); /* impossible? */
439: if (ff_xb.pos)
440: memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
441: }
442: ff_lastchar = 'x'; /* Anything non-zero. */
443: }
444: } else
445: #endif
446:
447: if (len) {
448: char *f = ff_xb.buf + ff_xb.pos;
449: char *t = ff_xb.buf;
450: char *eob = f + len;
451: /* Eliminate any multi-'\0' runs. */
452: while (f != eob) {
453: if (!(*t++ = *f++)) {
454: while (f != eob && *f == '\0')
455: f++;
456: }
457: }
458: ff_lastchar = f[-1];
459: if ((len = t - ff_xb.buf) != 0) {
460: /* This will not circle back to perform_io() because we only get
461: * called when there is plenty of room in the output buffer. */
462: write_buf(iobuf.out_fd, ff_xb.buf, len);
463: }
464: }
465: }
466:
467: void reduce_iobuf_size(xbuf *out, size_t new_size)
468: {
469: if (new_size < out->size) {
470: /* Avoid weird buffer interactions by only outputting this to stderr. */
1.1.1.4 ! misho 471: if (msgs2stderr == 1 && DEBUG_GTE(IO, 4)) {
1.1.1.2 misho 472: const char *name = out == &iobuf.out ? "iobuf.out"
473: : out == &iobuf.msg ? "iobuf.msg"
474: : NULL;
475: if (name) {
476: rprintf(FINFO, "[%s] reduced size of %s (-%d)\n",
477: who_am_i(), name, (int)(out->size - new_size));
478: }
479: }
480: out->size = new_size;
481: }
482: }
483:
484: void restore_iobuf_size(xbuf *out)
485: {
486: if (IOBUF_WAS_REDUCED(out->size)) {
487: size_t new_size = IOBUF_RESTORE_SIZE(out->size);
488: /* Avoid weird buffer interactions by only outputting this to stderr. */
1.1.1.4 ! misho 489: if (msgs2stderr == 1 && DEBUG_GTE(IO, 4)) {
1.1.1.2 misho 490: const char *name = out == &iobuf.out ? "iobuf.out"
491: : out == &iobuf.msg ? "iobuf.msg"
492: : NULL;
493: if (name) {
494: rprintf(FINFO, "[%s] restored size of %s (+%d)\n",
495: who_am_i(), name, (int)(new_size - out->size));
496: }
497: }
498: out->size = new_size;
499: }
500: }
501:
502: static void handle_kill_signal(BOOL flush_ok)
503: {
504: got_kill_signal = -1;
505: flush_ok_after_signal = flush_ok;
506: exit_cleanup(RERR_SIGNAL);
507: }
508:
509: /* Perform buffered input and/or output until specified conditions are met.
510: * When given a "needed" read or write request, this returns without doing any
511: * I/O if the needed input bytes or write space is already available. Once I/O
512: * is needed, this will try to do whatever reading and/or writing is currently
513: * possible, up to the maximum buffer allowances, no matter if this is a read
514: * or write request. However, the I/O stops as soon as the required input
515: * bytes or output space is available. If this is not a read request, the
516: * routine may also do some advantageous reading of messages from a multiplexed
517: * input source (which ensures that we don't jam up with everyone in their
518: * "need to write" code and nobody reading the accumulated data that would make
519: * writing possible).
520: *
521: * The iobuf.in, .out and .msg buffers are all circular. Callers need to be
522: * aware that some data copies will need to be split when the bytes wrap around
523: * from the end to the start. In order to help make writing into the output
524: * buffers easier for some operations (such as the use of SIVAL() into the
525: * buffer) a buffer may be temporarily shortened by a small amount, but the
526: * original size will be automatically restored when the .pos wraps to the
527: * start. See also the 3 raw_* iobuf vars that are used in the handling of
528: * MSG_DATA bytes as they are read-from/written-into the buffers.
529: *
530: * When writing, we flush data in the following priority order:
531: *
532: * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
533: *
534: * 2. Write out all the messages from the message buf (if iobuf.msg is active).
535: * Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
536: * messages before getting to the iobuf.out flushing (except for rule 1).
537: *
538: * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
539: * MSG_DATA header that was pre-allocated (when output is multiplexed).
540: *
541: * TODO: items for possible future work:
542: *
543: * - Make this routine able to read the generator-to-receiver batch flow?
544: *
545: * Unlike the old routines that this replaces, it is OK to read ahead as far as
546: * we can because the read_a_msg() routine now reads its bytes out of the input
547: * buffer. In the old days, only raw data was in the input buffer, and any
548: * unused raw data in the buf would prevent the reading of socket data. */
549: static char *perform_io(size_t needed, int flags)
550: {
551: fd_set r_fds, e_fds, w_fds;
552: struct timeval tv;
553: int cnt, max_fd;
554: size_t empty_buf_len = 0;
555: xbuf *out;
556: char *data;
557:
558: if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
559: if (iobuf.raw_input_ends_before)
560: iobuf.raw_input_ends_before -= iobuf.in.pos;
561: iobuf.in.pos = 0;
562: }
563:
564: switch (flags & PIO_NEED_FLAGS) {
565: case PIO_NEED_INPUT:
566: /* We never resize the circular input buffer. */
567: if (iobuf.in.size < needed) {
568: rprintf(FERROR, "need to read %ld bytes, iobuf.in.buf is only %ld bytes.\n",
569: (long)needed, (long)iobuf.in.size);
570: exit_cleanup(RERR_PROTOCOL);
571: }
572:
1.1.1.4 ! misho 573: if (msgs2stderr == 1 && DEBUG_GTE(IO, 3)) {
1.1.1.2 misho 574: rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
575: who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
576: }
577: break;
578:
579: case PIO_NEED_OUTROOM:
580: /* We never resize the circular output buffer. */
581: if (iobuf.out.size - iobuf.out_empty_len < needed) {
582: fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
583: (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
584: exit_cleanup(RERR_PROTOCOL);
585: }
586:
1.1.1.4 ! misho 587: if (msgs2stderr == 1 && DEBUG_GTE(IO, 3)) {
1.1.1.2 misho 588: rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
589: who_am_i(), (long)needed,
590: iobuf.out.len + needed > iobuf.out.size
591: ? (long)(iobuf.out.len + needed - iobuf.out.size) : 0L);
592: }
593: break;
594:
595: case PIO_NEED_MSGROOM:
596: /* We never resize the circular message buffer. */
597: if (iobuf.msg.size < needed) {
598: fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
599: (long)needed, (long)iobuf.msg.size);
600: exit_cleanup(RERR_PROTOCOL);
601: }
602:
1.1.1.4 ! misho 603: if (msgs2stderr == 1 && DEBUG_GTE(IO, 3)) {
1.1.1.2 misho 604: rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
605: who_am_i(), (long)needed,
606: iobuf.msg.len + needed > iobuf.msg.size
607: ? (long)(iobuf.msg.len + needed - iobuf.msg.size) : 0L);
608: }
609: break;
610:
611: case 0:
1.1.1.4 ! misho 612: if (msgs2stderr == 1 && DEBUG_GTE(IO, 3))
1.1.1.2 misho 613: rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
614: break;
615:
616: default:
617: exit_cleanup(RERR_UNSUPPORTED);
618: }
619:
620: while (1) {
621: switch (flags & PIO_NEED_FLAGS) {
622: case PIO_NEED_INPUT:
623: if (iobuf.in.len >= needed)
624: goto double_break;
625: break;
626: case PIO_NEED_OUTROOM:
627: /* Note that iobuf.out_empty_len doesn't factor into this check
628: * because iobuf.out.len already holds any needed header len. */
629: if (iobuf.out.len + needed <= iobuf.out.size)
630: goto double_break;
631: break;
632: case PIO_NEED_MSGROOM:
633: if (iobuf.msg.len + needed <= iobuf.msg.size)
634: goto double_break;
635: break;
636: }
637:
638: max_fd = -1;
639:
640: FD_ZERO(&r_fds);
641: FD_ZERO(&e_fds);
642: if (iobuf.in_fd >= 0 && iobuf.in.size - iobuf.in.len) {
643: if (!read_batch || batch_fd >= 0) {
644: FD_SET(iobuf.in_fd, &r_fds);
645: FD_SET(iobuf.in_fd, &e_fds);
646: }
647: if (iobuf.in_fd > max_fd)
648: max_fd = iobuf.in_fd;
649: }
650:
651: /* Only do more filesfrom processing if there is enough room in the out buffer. */
652: if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
653: FD_SET(ff_forward_fd, &r_fds);
654: if (ff_forward_fd > max_fd)
655: max_fd = ff_forward_fd;
656: }
657:
658: FD_ZERO(&w_fds);
659: if (iobuf.out_fd >= 0) {
660: if (iobuf.raw_flushing_ends_before
661: || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
662: if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
663: /* The iobuf.raw_flushing_ends_before value can point off the end
664: * of the iobuf.out buffer for a while, for easier subtracting. */
665: iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
666:
667: SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
668: ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
669:
1.1.1.4 ! misho 670: if (msgs2stderr == 1 && DEBUG_GTE(IO, 1)) {
1.1.1.2 misho 671: rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
672: who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
673: }
674:
675: /* reserve room for the next MSG_DATA header */
676: iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
677: if (iobuf.raw_data_header_pos >= iobuf.out.size)
678: iobuf.raw_data_header_pos -= iobuf.out.size;
679: else if (iobuf.raw_data_header_pos + 4 > iobuf.out.size) {
680: /* The 4-byte header won't fit at the end of the buffer,
681: * so we'll temporarily reduce the output buffer's size
682: * and put the header at the start of the buffer. */
683: reduce_iobuf_size(&iobuf.out, iobuf.raw_data_header_pos);
684: iobuf.raw_data_header_pos = 0;
685: }
686: /* Yes, it is possible for this to make len > size for a while. */
687: iobuf.out.len += 4;
688: }
689:
690: empty_buf_len = iobuf.out_empty_len;
691: out = &iobuf.out;
692: } else if (iobuf.msg.len) {
693: empty_buf_len = 0;
694: out = &iobuf.msg;
695: } else
696: out = NULL;
697: if (out) {
698: FD_SET(iobuf.out_fd, &w_fds);
699: if (iobuf.out_fd > max_fd)
700: max_fd = iobuf.out_fd;
701: }
702: } else
703: out = NULL;
704:
705: if (max_fd < 0) {
706: switch (flags & PIO_NEED_FLAGS) {
707: case PIO_NEED_INPUT:
708: iobuf.in.len = 0;
709: if (kluge_around_eof == 2)
710: exit_cleanup(0);
711: if (iobuf.in_fd == -2)
712: whine_about_eof(True);
713: rprintf(FERROR, "error in perform_io: no fd for input.\n");
714: exit_cleanup(RERR_PROTOCOL);
715: case PIO_NEED_OUTROOM:
716: case PIO_NEED_MSGROOM:
717: msgs2stderr = 1;
718: drain_multiplex_messages();
719: if (iobuf.out_fd == -2)
720: whine_about_eof(True);
721: rprintf(FERROR, "error in perform_io: no fd for output.\n");
722: exit_cleanup(RERR_PROTOCOL);
723: default:
724: /* No stated needs, so I guess this is OK. */
725: break;
726: }
727: break;
728: }
729:
730: if (got_kill_signal > 0)
731: handle_kill_signal(True);
732:
733: if (extra_flist_sending_enabled) {
734: if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD && IN_MULTIPLEXED_AND_READY)
735: tv.tv_sec = 0;
736: else {
737: extra_flist_sending_enabled = False;
738: tv.tv_sec = select_timeout;
739: }
740: } else
741: tv.tv_sec = select_timeout;
742: tv.tv_usec = 0;
743:
744: cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
745:
746: if (cnt <= 0) {
747: if (cnt < 0 && errno == EBADF) {
748: msgs2stderr = 1;
749: exit_cleanup(RERR_SOCKETIO);
750: }
751: if (extra_flist_sending_enabled) {
752: extra_flist_sending_enabled = False;
753: send_extra_file_list(sock_f_out, -1);
754: extra_flist_sending_enabled = !flist_eof;
755: } else
1.1.1.3 misho 756: check_timeout((flags & PIO_NEED_INPUT) != 0, 0);
1.1.1.2 misho 757: FD_ZERO(&r_fds); /* Just in case... */
758: FD_ZERO(&w_fds);
759: }
760:
761: if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
762: size_t len, pos = iobuf.in.pos + iobuf.in.len;
763: int n;
764: if (pos >= iobuf.in.size) {
765: pos -= iobuf.in.size;
766: len = iobuf.in.size - iobuf.in.len;
767: } else
768: len = iobuf.in.size - pos;
769: if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
770: if (n == 0) {
771: /* Signal that input has become invalid. */
772: if (!read_batch || batch_fd < 0 || am_generator)
773: iobuf.in_fd = -2;
774: batch_fd = -1;
775: continue;
776: }
777: if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
778: n = 0;
779: else {
780: /* Don't write errors on a dead socket. */
781: if (iobuf.in_fd == sock_f_in) {
782: if (am_sender)
783: msgs2stderr = 1;
784: rsyserr(FERROR_SOCKET, errno, "read error");
785: } else
786: rsyserr(FERROR, errno, "read error");
787: exit_cleanup(RERR_SOCKETIO);
788: }
789: }
1.1.1.4 ! misho 790: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 791: rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
792:
1.1.1.4 ! misho 793: if (io_timeout || stop_at_utime) {
1.1.1.2 misho 794: last_io_in = time(NULL);
1.1.1.4 ! misho 795: if (stop_at_utime && last_io_in >= stop_at_utime) {
! 796: rprintf(FERROR, "stopping at requested limit\n");
! 797: exit_cleanup(RERR_TIMEOUT);
! 798: }
! 799: if (io_timeout && flags & PIO_NEED_INPUT)
1.1.1.2 misho 800: maybe_send_keepalive(last_io_in, 0);
801: }
802: stats.total_read += n;
803:
804: iobuf.in.len += n;
805: }
806:
807: if (out && FD_ISSET(iobuf.out_fd, &w_fds)) {
808: size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
809: int n;
810:
811: if (bwlimit_writemax && len > bwlimit_writemax)
812: len = bwlimit_writemax;
813:
814: if (out->pos + len > out->size)
815: len = out->size - out->pos;
816: if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
817: if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
818: n = 0;
819: else {
820: /* Don't write errors on a dead socket. */
821: msgs2stderr = 1;
822: iobuf.out_fd = -2;
823: iobuf.out.len = iobuf.msg.len = iobuf.raw_flushing_ends_before = 0;
1.1.1.4 ! misho 824: rsyserr(FERROR_SOCKET, errno, "write error");
1.1.1.2 misho 825: drain_multiplex_messages();
826: exit_cleanup(RERR_SOCKETIO);
827: }
828: }
1.1.1.4 ! misho 829: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2)) {
1.1.1.2 misho 830: rprintf(FINFO, "[%s] %s sent=%ld\n",
831: who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
832: }
833:
834: if (io_timeout)
835: last_io_out = time(NULL);
836: stats.total_written += n;
837:
838: if (bwlimit_writemax)
839: sleep_for_bwlimit(n);
840:
841: if ((out->pos += n) == out->size) {
842: if (iobuf.raw_flushing_ends_before)
843: iobuf.raw_flushing_ends_before -= out->size;
844: out->pos = 0;
845: restore_iobuf_size(out);
846: } else if (out->pos == iobuf.raw_flushing_ends_before)
847: iobuf.raw_flushing_ends_before = 0;
848: if ((out->len -= n) == empty_buf_len) {
849: out->pos = 0;
850: restore_iobuf_size(out);
851: if (empty_buf_len)
852: iobuf.raw_data_header_pos = 0;
853: }
854: }
855:
856: if (got_kill_signal > 0)
857: handle_kill_signal(True);
858:
859: /* We need to help prevent deadlock by doing what reading
860: * we can whenever we are here trying to write. */
861: if (IN_MULTIPLEXED_AND_READY && !(flags & PIO_NEED_INPUT)) {
862: while (!iobuf.raw_input_ends_before && iobuf.in.len > 512)
863: read_a_msg();
864: if (flist_receiving_enabled && iobuf.in.len > 512)
865: wait_for_receiver(); /* generator only */
866: }
867:
868: if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
869: /* This can potentially flush all output and enable
870: * multiplexed output, so keep this last in the loop
871: * and be sure to not cache anything that would break
872: * such a change. */
873: forward_filesfrom_data();
874: }
875: }
876: double_break:
877:
878: if (got_kill_signal > 0)
879: handle_kill_signal(True);
880:
881: data = iobuf.in.buf + iobuf.in.pos;
882:
883: if (flags & PIO_CONSUME_INPUT) {
884: iobuf.in.len -= needed;
885: iobuf.in.pos += needed;
886: if (iobuf.in.pos == iobuf.raw_input_ends_before)
887: iobuf.raw_input_ends_before = 0;
888: if (iobuf.in.pos >= iobuf.in.size) {
889: iobuf.in.pos -= iobuf.in.size;
890: if (iobuf.raw_input_ends_before)
891: iobuf.raw_input_ends_before -= iobuf.in.size;
892: }
893: }
894:
895: return data;
896: }
897:
898: static void raw_read_buf(char *buf, size_t len)
899: {
900: size_t pos = iobuf.in.pos;
901: char *data = perform_io(len, PIO_INPUT_AND_CONSUME);
902: if (iobuf.in.pos <= pos && len) {
903: size_t siz = len - iobuf.in.pos;
904: memcpy(buf, data, siz);
905: memcpy(buf + siz, iobuf.in.buf, iobuf.in.pos);
906: } else
907: memcpy(buf, data, len);
908: }
909:
910: static int32 raw_read_int(void)
911: {
912: char *data, buf[4];
913: if (iobuf.in.size - iobuf.in.pos >= 4)
914: data = perform_io(4, PIO_INPUT_AND_CONSUME);
915: else
916: raw_read_buf(data = buf, 4);
917: return IVAL(data, 0);
918: }
919:
920: void noop_io_until_death(void)
921: {
922: char buf[1024];
923:
924: if (!iobuf.in.buf || !iobuf.out.buf || iobuf.in_fd < 0 || iobuf.out_fd < 0 || kluge_around_eof)
925: return;
926:
1.1.1.4 ! misho 927: /* If we're talking to a daemon over a socket, don't short-circuit this logic */
! 928: if (msgs2stderr && daemon_connection >= 0)
! 929: return;
! 930:
1.1.1.2 misho 931: kluge_around_eof = 2;
932: /* Setting an I/O timeout ensures that if something inexplicably weird
933: * happens, we won't hang around forever. */
934: if (!io_timeout)
935: set_io_timeout(60);
936:
937: while (1)
938: read_buf(iobuf.in_fd, buf, sizeof buf);
939: }
940:
941: /* Buffer a message for the multiplexed output stream. Is not used for (normal) MSG_DATA. */
942: int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
1.1 misho 943: {
1.1.1.2 misho 944: char *hdr;
945: size_t needed, pos;
1.1.1.4 ! misho 946: BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr == 1 || code != MSG_INFO);
1.1 misho 947:
1.1.1.2 misho 948: if (!OUT_MULTIPLEXED)
949: return 0;
1.1 misho 950:
1.1.1.2 misho 951: if (want_debug)
952: rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
1.1 misho 953:
1.1.1.2 misho 954: /* When checking for enough free space for this message, we need to
955: * make sure that there is space for the 4-byte header, plus we'll
956: * assume that we may waste up to 3 bytes (if the header doesn't fit
957: * at the physical end of the buffer). */
958: #ifdef ICONV_OPTION
959: if (convert > 0 && ic_send == (iconv_t)-1)
960: convert = 0;
961: if (convert > 0) {
962: /* Ensuring double-size room leaves space for maximal conversion expansion. */
963: needed = len*2 + 4 + 3;
964: } else
965: #endif
966: needed = len + 4 + 3;
1.1.1.4 ! misho 967: if (iobuf.msg.len + needed > iobuf.msg.size) {
! 968: if (!am_receiver)
! 969: perform_io(needed, PIO_NEED_MSGROOM);
! 970: else { /* We allow the receiver to increase their iobuf.msg size to avoid a deadlock. */
! 971: size_t old_size = iobuf.msg.size;
! 972: restore_iobuf_size(&iobuf.msg);
! 973: realloc_xbuf(&iobuf.msg, iobuf.msg.size * 2);
! 974: if (iobuf.msg.pos + iobuf.msg.len > old_size)
! 975: memcpy(iobuf.msg.buf + old_size, iobuf.msg.buf, iobuf.msg.pos + iobuf.msg.len - old_size);
! 976: }
! 977: }
1.1.1.2 misho 978:
979: pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
980: if (pos >= iobuf.msg.size)
981: pos -= iobuf.msg.size;
982: else if (pos + 4 > iobuf.msg.size) {
983: /* The 4-byte header won't fit at the end of the buffer,
984: * so we'll temporarily reduce the message buffer's size
985: * and put the header at the start of the buffer. */
986: reduce_iobuf_size(&iobuf.msg, pos);
987: pos = 0;
988: }
989: hdr = iobuf.msg.buf + pos;
1.1 misho 990:
1.1.1.2 misho 991: iobuf.msg.len += 4; /* Allocate room for the coming header bytes. */
992:
993: #ifdef ICONV_OPTION
994: if (convert > 0) {
995: xbuf inbuf;
996:
997: INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
998:
999: len = iobuf.msg.len;
1000: iconvbufs(ic_send, &inbuf, &iobuf.msg,
1001: ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
1002: if (inbuf.len > 0) {
1003: rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
1004: exit_cleanup(RERR_UNSUPPORTED);
1005: }
1006: len = iobuf.msg.len - len;
1007: } else
1008: #endif
1009: {
1010: size_t siz;
1011:
1012: if ((pos += 4) == iobuf.msg.size)
1013: pos = 0;
1014:
1015: /* Handle a split copy if we wrap around the end of the circular buffer. */
1016: if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
1017: memcpy(iobuf.msg.buf + pos, buf, siz);
1018: memcpy(iobuf.msg.buf, buf + siz, len - siz);
1019: } else
1020: memcpy(iobuf.msg.buf + pos, buf, len);
1021:
1022: iobuf.msg.len += len;
1.1 misho 1023: }
1024:
1.1.1.2 misho 1025: SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
1.1 misho 1026:
1.1.1.2 misho 1027: if (want_debug && convert > 0)
1028: rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
1.1 misho 1029:
1.1.1.2 misho 1030: return 1;
1031: }
1.1 misho 1032:
1.1.1.2 misho 1033: void send_msg_int(enum msgcode code, int num)
1034: {
1035: char numbuf[4];
1036:
1037: if (DEBUG_GTE(IO, 1))
1038: rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
1.1 misho 1039:
1.1.1.2 misho 1040: SIVAL(numbuf, 0, num);
1041: send_msg(code, numbuf, 4, -1);
1042: }
1.1 misho 1043:
1.1.1.2 misho 1044: static void got_flist_entry_status(enum festatus status, int ndx)
1.1 misho 1045: {
1046: struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
1047:
1048: if (remove_source_files) {
1049: active_filecnt--;
1050: active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
1051: }
1052:
1053: if (inc_recurse)
1054: flist->in_progress--;
1055:
1056: switch (status) {
1057: case FES_SUCCESS:
1058: if (remove_source_files)
1.1.1.2 misho 1059: send_msg_int(MSG_SUCCESS, ndx);
1.1 misho 1060: /* FALL THROUGH */
1061: case FES_NO_SEND:
1062: #ifdef SUPPORT_HARD_LINKS
1063: if (preserve_hard_links) {
1064: struct file_struct *file = flist->files[ndx - flist->ndx_start];
1065: if (F_IS_HLINKED(file)) {
1066: if (status == FES_NO_SEND)
1067: flist_ndx_push(&hlink_list, -2); /* indicates a failure follows */
1068: flist_ndx_push(&hlink_list, ndx);
1.1.1.2 misho 1069: if (inc_recurse)
1070: flist->in_progress++;
1.1 misho 1071: }
1.1.1.4 ! misho 1072: } else if (checksum_files & CSF_UPDATE) {
! 1073: struct file_struct *file = flist->files[ndx - flist->ndx_start];
! 1074: set_cached_checksum(flist, file);
1.1 misho 1075: }
1076: #endif
1077: break;
1078: case FES_REDO:
1079: if (read_batch) {
1080: if (inc_recurse)
1081: flist->in_progress++;
1082: break;
1083: }
1084: if (inc_recurse)
1085: flist->to_redo++;
1086: flist_ndx_push(&redo_list, ndx);
1087: break;
1088: }
1089: }
1090:
1091: /* Note the fds used for the main socket (which might really be a pipe
1092: * for a local transfer, but we can ignore that). */
1093: void io_set_sock_fds(int f_in, int f_out)
1094: {
1095: sock_f_in = f_in;
1096: sock_f_out = f_out;
1097: }
1098:
1099: void set_io_timeout(int secs)
1100: {
1101: io_timeout = secs;
1102: allowed_lull = (io_timeout + 1) / 2;
1103:
1104: if (!io_timeout || allowed_lull > SELECT_TIMEOUT)
1105: select_timeout = SELECT_TIMEOUT;
1106: else
1107: select_timeout = allowed_lull;
1108:
1109: if (read_batch)
1110: allowed_lull = 0;
1111: }
1112:
1113: static void check_for_d_option_error(const char *msg)
1114: {
1115: static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
1116: char *colon;
1117: int saw_d = 0;
1118:
1119: if (*msg != 'r'
1120: || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
1121: return;
1122:
1123: msg += sizeof REMOTE_OPTION_ERROR - 1;
1124: if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
1125: || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
1126: return;
1127:
1128: for ( ; *msg != ':'; msg++) {
1129: if (*msg == 'd')
1130: saw_d = 1;
1131: else if (*msg == 'e')
1132: break;
1133: else if (strchr(rsync263_opts, *msg) == NULL)
1134: return;
1135: }
1136:
1137: if (saw_d) {
1.1.1.4 ! misho 1138: rprintf(FWARNING, "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
1.1 misho 1139: }
1140: }
1141:
1142: /* This is used by the generator to limit how many file transfers can
1143: * be active at once when --remove-source-files is specified. Without
1144: * this, sender-side deletions were mostly happening at the end. */
1145: void increment_active_files(int ndx, int itemizing, enum logcode code)
1146: {
1147: while (1) {
1148: /* TODO: tune these limits? */
1149: int limit = active_bytecnt >= 128*1024 ? 10 : 50;
1150: if (active_filecnt < limit)
1151: break;
1152: check_for_finished_files(itemizing, code, 0);
1153: if (active_filecnt < limit)
1154: break;
1.1.1.2 misho 1155: wait_for_receiver();
1.1 misho 1156: }
1157:
1158: active_filecnt++;
1159: active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1160: }
1161:
1162: int get_redo_num(void)
1163: {
1164: return flist_ndx_pop(&redo_list);
1165: }
1166:
1167: int get_hlink_num(void)
1168: {
1169: return flist_ndx_pop(&hlink_list);
1170: }
1171:
1.1.1.2 misho 1172: /* When we're the receiver and we have a local --files-from list of names
1.1 misho 1173: * that needs to be sent over the socket to the sender, we have to do two
1174: * things at the same time: send the sender a list of what files we're
1175: * processing and read the incoming file+info list from the sender. We do
1.1.1.2 misho 1176: * this by making recv_file_list() call forward_filesfrom_data(), which
1177: * will ensure that we forward data to the sender until we get some data
1178: * for recv_file_list() to use. */
1179: void start_filesfrom_forwarding(int fd)
1180: {
1181: if (protocol_version < 31 && OUT_MULTIPLEXED) {
1182: /* Older protocols send the files-from data w/o packaging
1183: * it in multiplexed I/O packets, so temporarily switch
1184: * to buffered I/O to match this behavior. */
1185: iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1186: ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1.1 misho 1187: }
1.1.1.2 misho 1188: ff_forward_fd = fd;
1.1 misho 1189:
1.1.1.2 misho 1190: alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1.1 misho 1191: }
1192:
1193: /* Read a line into the "buf" buffer. */
1194: int read_line(int fd, char *buf, size_t bufsiz, int flags)
1195: {
1196: char ch, *s, *eob;
1197:
1198: #ifdef ICONV_OPTION
1199: if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1.1.1.4 ! misho 1200: realloc_xbuf(&iconv_buf, ROUND_UP_1024(bufsiz) + 1024);
1.1 misho 1201: #endif
1202:
1203: start:
1204: #ifdef ICONV_OPTION
1205: s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1206: #else
1207: s = buf;
1208: #endif
1209: eob = s + bufsiz - 1;
1210: while (1) {
1.1.1.2 misho 1211: /* We avoid read_byte() for files because files can return an EOF. */
1212: if (fd == iobuf.in_fd)
1213: ch = read_byte(fd);
1214: else if (safe_read(fd, &ch, 1) == 0)
1.1 misho 1215: break;
1216: if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1217: /* Skip empty lines if dumping comments. */
1218: if (flags & RL_DUMP_COMMENTS && s == buf)
1219: continue;
1220: break;
1221: }
1222: if (s < eob)
1223: *s++ = ch;
1224: }
1225: *s = '\0';
1226:
1227: if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1228: goto start;
1229:
1230: #ifdef ICONV_OPTION
1231: if (flags & RL_CONVERT) {
1232: xbuf outbuf;
1233: INIT_XBUF(outbuf, buf, 0, bufsiz);
1234: iconv_buf.pos = 0;
1235: iconv_buf.len = s - iconv_buf.buf;
1236: iconvbufs(ic_recv, &iconv_buf, &outbuf,
1.1.1.2 misho 1237: ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1.1 misho 1238: outbuf.buf[outbuf.len] = '\0';
1239: return outbuf.len;
1240: }
1241: #endif
1242:
1243: return s - buf;
1244: }
1245:
1246: void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1247: char ***argv_p, int *argc_p, char **request_p)
1248: {
1249: int maxargs = MAX_ARGS;
1.1.1.2 misho 1250: int dot_pos = 0, argc = 0, request_len = 0;
1.1 misho 1251: char **argv, *p;
1252: int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1253:
1254: #ifdef ICONV_OPTION
1255: rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1256: #endif
1257:
1.1.1.4 ! misho 1258: argv = new_array(char *, maxargs);
1.1 misho 1259: if (mod_name && !protect_args)
1260: argv[argc++] = "rsyncd";
1261:
1.1.1.2 misho 1262: if (request_p)
1263: *request_p = NULL;
1264:
1.1 misho 1265: while (1) {
1266: if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1267: break;
1268:
1269: if (argc == maxargs-1) {
1270: maxargs += MAX_ARGS;
1.1.1.4 ! misho 1271: argv = realloc_array(argv, char *, maxargs);
1.1 misho 1272: }
1273:
1274: if (dot_pos) {
1.1.1.2 misho 1275: if (request_p && request_len < 1024) {
1276: int len = strlen(buf);
1277: if (request_len)
1278: request_p[0][request_len++] = ' ';
1.1.1.4 ! misho 1279: *request_p = realloc_array(*request_p, char, request_len + len + 1);
1.1.1.2 misho 1280: memcpy(*request_p + request_len, buf, len + 1);
1281: request_len += len;
1.1 misho 1282: }
1283: if (mod_name)
1284: glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1285: else
1286: glob_expand(buf, &argv, &argc, &maxargs);
1287: } else {
1.1.1.4 ! misho 1288: p = strdup(buf);
1.1 misho 1289: argv[argc++] = p;
1290: if (*p == '.' && p[1] == '\0')
1291: dot_pos = argc;
1292: }
1293: }
1294: argv[argc] = NULL;
1295:
1296: glob_expand(NULL, NULL, NULL, NULL);
1297:
1298: *argc_p = argc;
1299: *argv_p = argv;
1300: }
1301:
1.1.1.2 misho 1302: BOOL io_start_buffering_out(int f_out)
1.1 misho 1303: {
1.1.1.4 ! misho 1304: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 1305: rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1306:
1307: if (iobuf.out.buf) {
1308: if (iobuf.out_fd == -1)
1309: iobuf.out_fd = f_out;
1310: else
1311: assert(f_out == iobuf.out_fd);
1312: return False;
1.1 misho 1313: }
1.1.1.2 misho 1314:
1315: alloc_xbuf(&iobuf.out, ROUND_UP_1024(IO_BUFFER_SIZE * 2));
1316: iobuf.out_fd = f_out;
1317:
1318: return True;
1319: }
1320:
1321: BOOL io_start_buffering_in(int f_in)
1322: {
1.1.1.4 ! misho 1323: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 1324: rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1325:
1326: if (iobuf.in.buf) {
1327: if (iobuf.in_fd == -1)
1328: iobuf.in_fd = f_in;
1329: else
1330: assert(f_in == iobuf.in_fd);
1331: return False;
1332: }
1333:
1334: alloc_xbuf(&iobuf.in, ROUND_UP_1024(IO_BUFFER_SIZE));
1335: iobuf.in_fd = f_in;
1336:
1337: return True;
1.1 misho 1338: }
1339:
1.1.1.2 misho 1340: void io_end_buffering_in(BOOL free_buffers)
1.1 misho 1341: {
1.1.1.4 ! misho 1342: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2)) {
1.1.1.2 misho 1343: rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1344: who_am_i(), free_buffers ? "FREE" : "KEEP");
1.1 misho 1345: }
1346:
1.1.1.2 misho 1347: if (free_buffers)
1348: free_xbuf(&iobuf.in);
1349: else
1350: iobuf.in.pos = iobuf.in.len = 0;
1351:
1352: iobuf.in_fd = -1;
1.1 misho 1353: }
1354:
1.1.1.2 misho 1355: void io_end_buffering_out(BOOL free_buffers)
1.1 misho 1356: {
1.1.1.4 ! misho 1357: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2)) {
1.1.1.2 misho 1358: rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1359: who_am_i(), free_buffers ? "FREE" : "KEEP");
1360: }
1361:
1.1 misho 1362: io_flush(FULL_FLUSH);
1.1.1.2 misho 1363:
1364: if (free_buffers) {
1365: free_xbuf(&iobuf.out);
1366: free_xbuf(&iobuf.msg);
1367: }
1368:
1369: iobuf.out_fd = -1;
1.1 misho 1370: }
1371:
1372: void maybe_flush_socket(int important)
1373: {
1.1.1.2 misho 1374: if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1.1 misho 1375: && (important || time(NULL) - last_io_out >= 5))
1376: io_flush(NORMAL_FLUSH);
1377: }
1378:
1.1.1.2 misho 1379: /* Older rsync versions used to send either a MSG_NOOP (protocol 30) or a
1380: * raw-data-based keep-alive (protocol 29), both of which implied forwarding of
1381: * the message through the sender. Since the new timeout method does not need
1382: * any forwarding, we just send an empty MSG_DATA message, which works with all
1383: * rsync versions. This avoids any message forwarding, and leaves the raw-data
1384: * stream alone (since we can never be quite sure if that stream is in the
1385: * right state for a keep-alive message). */
1386: void maybe_send_keepalive(time_t now, int flags)
1387: {
1388: if (flags & MSK_ACTIVE_RECEIVER)
1389: last_io_in = now; /* Fudge things when we're working hard on the files. */
1390:
1.1.1.3 misho 1391: /* Early in the transfer (before the receiver forks) the receiving side doesn't
1392: * care if it hasn't sent data in a while as long as it is receiving data (in
1393: * fact, a pre-3.1.0 rsync would die if we tried to send it a keep alive during
1394: * this time). So, if we're an early-receiving proc, just return and let the
1395: * incoming data determine if we timeout. */
1396: if (!am_sender && !am_receiver && !am_generator)
1397: return;
1398:
1.1.1.2 misho 1399: if (now - last_io_out >= allowed_lull) {
1400: /* The receiver is special: it only sends keep-alive messages if it is
1401: * actively receiving data. Otherwise, it lets the generator timeout. */
1402: if (am_receiver && now - last_io_in >= io_timeout)
1403: return;
1404:
1405: if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len)
1406: send_msg(MSG_DATA, "", 0, 0);
1407: if (!(flags & MSK_ALLOW_FLUSH)) {
1408: /* Let the caller worry about writing out the data. */
1409: } else if (iobuf.msg.len)
1410: perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1411: else if (iobuf.out.len > iobuf.out_empty_len)
1.1 misho 1412: io_flush(NORMAL_FLUSH);
1413: }
1414: }
1415:
1.1.1.2 misho 1416: void start_flist_forward(int ndx)
1.1 misho 1417: {
1.1.1.2 misho 1418: write_int(iobuf.out_fd, ndx);
1419: forward_flist_data = 1;
1.1 misho 1420: }
1421:
1422: void stop_flist_forward(void)
1423: {
1.1.1.2 misho 1424: forward_flist_data = 0;
1.1 misho 1425: }
1426:
1.1.1.2 misho 1427: /* Read a message from a multiplexed source. */
1428: static void read_a_msg(void)
1.1 misho 1429: {
1.1.1.2 misho 1430: char data[BIGPATHBUFLEN];
1431: int tag, val;
1.1 misho 1432: size_t msg_bytes;
1433:
1.1.1.2 misho 1434: /* This ensures that perform_io() does not try to do any message reading
1435: * until we've read all of the data for this message. We should also
1436: * try to avoid calling things that will cause data to be written via
1437: * perform_io() prior to this being reset to 1. */
1438: iobuf.in_multiplexed = -1;
1.1 misho 1439:
1.1.1.2 misho 1440: tag = raw_read_int();
1.1 misho 1441:
1.1.1.2 misho 1442: msg_bytes = tag & 0xFFFFFF;
1443: tag = (tag >> 24) - MPLEX_BASE;
1.1 misho 1444:
1.1.1.4 ! misho 1445: if (msgs2stderr == 1 && DEBUG_GTE(IO, 1))
1.1.1.2 misho 1446: rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1.1 misho 1447:
1.1.1.2 misho 1448: switch (tag) {
1449: case MSG_DATA:
1450: assert(iobuf.raw_input_ends_before == 0);
1451: /* Though this does not yet read the data, we do mark where in
1452: * the buffer the msg data will end once it is read. It is
1453: * possible that this points off the end of the buffer, in
1454: * which case the gradual reading of the input stream will
1455: * cause this value to wrap around and eventually become real. */
1456: if (msg_bytes)
1457: iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1458: iobuf.in_multiplexed = 1;
1459: break;
1460: case MSG_STATS:
1461: if (msg_bytes != sizeof stats.total_read || !am_generator)
1462: goto invalid_msg;
1463: raw_read_buf((char*)&stats.total_read, sizeof stats.total_read);
1464: iobuf.in_multiplexed = 1;
1465: break;
1466: case MSG_REDO:
1467: if (msg_bytes != 4 || !am_generator)
1468: goto invalid_msg;
1469: val = raw_read_int();
1470: iobuf.in_multiplexed = 1;
1471: got_flist_entry_status(FES_REDO, val);
1472: break;
1473: case MSG_IO_ERROR:
1474: if (msg_bytes != 4)
1475: goto invalid_msg;
1476: val = raw_read_int();
1477: iobuf.in_multiplexed = 1;
1478: io_error |= val;
1479: if (am_receiver)
1480: send_msg_int(MSG_IO_ERROR, val);
1481: break;
1482: case MSG_IO_TIMEOUT:
1483: if (msg_bytes != 4 || am_server || am_generator)
1484: goto invalid_msg;
1485: val = raw_read_int();
1486: iobuf.in_multiplexed = 1;
1487: if (!io_timeout || io_timeout > val) {
1488: if (INFO_GTE(MISC, 2))
1489: rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1490: set_io_timeout(val);
1491: }
1492: break;
1493: case MSG_NOOP:
1494: /* Support protocol-30 keep-alive method. */
1495: if (msg_bytes != 0)
1496: goto invalid_msg;
1497: iobuf.in_multiplexed = 1;
1498: if (am_sender)
1499: maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
1500: break;
1.1.1.4 ! misho 1501: case MSG_CHECKSUM:
! 1502: /* This receives some checksum info that we want to make a note of
! 1503: * (which allows a single process to do all the writing to the db). */
! 1504: if (msg_bytes != MSG_CHECKSUM_LEN)
! 1505: goto overflow;
! 1506: raw_read_buf(data, MSG_CHECKSUM_LEN);
! 1507: if (am_generator && same_db) {
! 1508: iobuf.in_multiplexed = 1;
! 1509: send_msg(MSG_CHECKSUM, data, MSG_CHECKSUM_LEN, 0);
! 1510: } if (am_receiver || (am_sender && !local_server))
! 1511: goto unexpected;
! 1512: else {
! 1513: /* The received data is a set of numbers followed by the checksum. */
! 1514: STRUCT_STAT st;
! 1515: st.st_dev = IVAL64(data, 0);
! 1516: st.st_ino = IVAL64(data, 8);
! 1517: st.st_size = IVAL64(data, 16);
! 1518: st.st_mtime = IVAL64(data, 24);
! 1519: st.st_ctime = IVAL64(data, 32);
! 1520: #if MSG_CHECKSUM_LONGS != 5
! 1521: #error Fix the parsing of checksum long values
! 1522: #endif
! 1523: iobuf.in_multiplexed = 1;
! 1524: db_set_checksum(IVAL(data, MSG_CHECKSUM_LONGS*8), &st, data + MSG_CHECKSUM_LONGS*8 + 4);
! 1525: }
! 1526: break;
1.1.1.2 misho 1527: case MSG_DELETED:
1528: if (msg_bytes >= sizeof data)
1529: goto overflow;
1530: if (am_generator) {
1531: raw_read_buf(data, msg_bytes);
1532: iobuf.in_multiplexed = 1;
1533: send_msg(MSG_DELETED, data, msg_bytes, 1);
1.1 misho 1534: break;
1.1.1.2 misho 1535: }
1.1 misho 1536: #ifdef ICONV_OPTION
1.1.1.2 misho 1537: if (ic_recv != (iconv_t)-1) {
1538: xbuf outbuf, inbuf;
1539: char ibuf[512];
1540: int add_null = 0;
1541: int flags = ICB_INCLUDE_BAD | ICB_INIT;
1542:
1543: INIT_CONST_XBUF(outbuf, data);
1544: INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1545:
1546: while (msg_bytes) {
1547: size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1548: raw_read_buf(ibuf + inbuf.len, len);
1549: inbuf.pos = 0;
1550: inbuf.len += len;
1551: if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1552: inbuf.len--, add_null = 1;
1553: if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1554: if (errno == E2BIG)
1.1 misho 1555: goto overflow;
1.1.1.2 misho 1556: /* Buffer ended with an incomplete char, so move the
1557: * bytes to the start of the buffer and continue. */
1558: memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1.1 misho 1559: }
1.1.1.2 misho 1560: flags &= ~ICB_INIT;
1.1 misho 1561: }
1.1.1.2 misho 1562: if (add_null) {
1563: if (outbuf.len == outbuf.size)
1564: goto overflow;
1565: outbuf.buf[outbuf.len++] = '\0';
1.1 misho 1566: }
1.1.1.2 misho 1567: msg_bytes = outbuf.len;
1568: } else
1569: #endif
1570: raw_read_buf(data, msg_bytes);
1571: iobuf.in_multiplexed = 1;
1572: /* A directory name was sent with the trailing null */
1573: if (msg_bytes > 0 && !data[msg_bytes-1])
1574: log_delete(data, S_IFDIR);
1575: else {
1576: data[msg_bytes] = '\0';
1577: log_delete(data, S_IFREG);
1578: }
1579: break;
1580: case MSG_SUCCESS:
1581: if (msg_bytes != 4) {
1582: invalid_msg:
1583: rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1584: tag, (unsigned long)msg_bytes, who_am_i(),
1585: inc_recurse ? "/inc" : "");
1586: exit_cleanup(RERR_STREAMIO);
1587: }
1588: val = raw_read_int();
1589: iobuf.in_multiplexed = 1;
1590: if (am_generator)
1591: got_flist_entry_status(FES_SUCCESS, val);
1592: else
1593: successful_send(val);
1594: break;
1595: case MSG_NO_SEND:
1596: if (msg_bytes != 4)
1597: goto invalid_msg;
1598: val = raw_read_int();
1599: iobuf.in_multiplexed = 1;
1600: if (am_generator)
1601: got_flist_entry_status(FES_NO_SEND, val);
1602: else
1603: send_msg_int(MSG_NO_SEND, val);
1604: break;
1605: case MSG_ERROR_SOCKET:
1606: case MSG_ERROR_UTF8:
1607: case MSG_CLIENT:
1608: case MSG_LOG:
1609: if (!am_generator)
1610: goto invalid_msg;
1611: if (tag == MSG_ERROR_SOCKET)
1612: msgs2stderr = 1;
1613: /* FALL THROUGH */
1614: case MSG_INFO:
1615: case MSG_ERROR:
1616: case MSG_ERROR_XFER:
1617: case MSG_WARNING:
1618: if (msg_bytes >= sizeof data) {
1619: overflow:
1620: rprintf(FERROR,
1621: "multiplexing overflow %d:%lu [%s%s]\n",
1622: tag, (unsigned long)msg_bytes, who_am_i(),
1623: inc_recurse ? "/inc" : "");
1624: exit_cleanup(RERR_STREAMIO);
1625: }
1626: raw_read_buf(data, msg_bytes);
1627: /* We don't set in_multiplexed value back to 1 before writing this message
1628: * because the write might loop back and read yet another message, over and
1629: * over again, while waiting for room to put the message in the msg buffer. */
1630: rwrite((enum logcode)tag, data, msg_bytes, !am_generator);
1631: iobuf.in_multiplexed = 1;
1632: if (first_message) {
1633: if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof data) {
1634: data[msg_bytes] = '\0';
1635: check_for_d_option_error(data);
1636: }
1637: first_message = 0;
1638: }
1639: break;
1640: case MSG_ERROR_EXIT:
1641: if (msg_bytes == 4)
1642: val = raw_read_int();
1643: else if (msg_bytes == 0)
1644: val = 0;
1645: else
1646: goto invalid_msg;
1647: iobuf.in_multiplexed = 1;
1648: if (DEBUG_GTE(EXIT, 3))
1649: rprintf(FINFO, "[%s] got MSG_ERROR_EXIT with %ld bytes\n", who_am_i(), (long)msg_bytes);
1650: if (msg_bytes == 0) {
1651: if (!am_sender && !am_generator) {
1652: if (DEBUG_GTE(EXIT, 3)) {
1653: rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT (len 0)\n",
1654: who_am_i());
1655: }
1656: send_msg(MSG_ERROR_EXIT, "", 0, 0);
1657: io_flush(FULL_FLUSH);
1.1 misho 1658: }
1.1.1.2 misho 1659: } else if (protocol_version >= 31) {
1660: if (am_generator || am_receiver) {
1661: if (DEBUG_GTE(EXIT, 3)) {
1662: rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT with exit_code %d\n",
1663: who_am_i(), val);
1.1 misho 1664: }
1.1.1.2 misho 1665: send_msg_int(MSG_ERROR_EXIT, val);
1666: } else {
1667: if (DEBUG_GTE(EXIT, 3)) {
1668: rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT (len 0)\n",
1669: who_am_i());
1670: }
1671: send_msg(MSG_ERROR_EXIT, "", 0, 0);
1.1 misho 1672: }
1673: }
1.1.1.2 misho 1674: /* Send a negative linenum so that we don't end up
1675: * with a duplicate exit message. */
1676: _exit_cleanup(val, __FILE__, 0 - __LINE__);
1677: default:
1.1.1.4 ! misho 1678: unexpected:
1.1.1.2 misho 1679: rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1680: tag, who_am_i(), inc_recurse ? "/inc" : "");
1681: exit_cleanup(RERR_STREAMIO);
1.1 misho 1682: }
1683:
1.1.1.2 misho 1684: assert(iobuf.in_multiplexed > 0);
1.1 misho 1685: }
1686:
1.1.1.2 misho 1687: static void drain_multiplex_messages(void)
1.1 misho 1688: {
1.1.1.2 misho 1689: while (IN_MULTIPLEXED_AND_READY && iobuf.in.len) {
1690: if (iobuf.raw_input_ends_before) {
1691: size_t raw_len = iobuf.raw_input_ends_before - iobuf.in.pos;
1692: iobuf.raw_input_ends_before = 0;
1693: if (raw_len >= iobuf.in.len) {
1694: iobuf.in.len = 0;
1695: break;
1696: }
1697: iobuf.in.len -= raw_len;
1698: if ((iobuf.in.pos += raw_len) >= iobuf.in.size)
1699: iobuf.in.pos -= iobuf.in.size;
1700: }
1701: read_a_msg();
1.1 misho 1702: }
1.1.1.2 misho 1703: }
1.1 misho 1704:
1.1.1.2 misho 1705: void wait_for_receiver(void)
1706: {
1707: if (!iobuf.raw_input_ends_before)
1708: read_a_msg();
1.1 misho 1709:
1.1.1.2 misho 1710: if (iobuf.raw_input_ends_before) {
1711: int ndx = read_int(iobuf.in_fd);
1712: if (ndx < 0) {
1713: switch (ndx) {
1714: case NDX_FLIST_EOF:
1715: flist_eof = 1;
1716: if (DEBUG_GTE(FLIST, 3))
1717: rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1718: break;
1719: case NDX_DONE:
1720: msgdone_cnt++;
1721: break;
1722: default:
1723: exit_cleanup(RERR_STREAMIO);
1724: }
1725: } else {
1726: struct file_list *flist;
1727: flist_receiving_enabled = False;
1728: if (DEBUG_GTE(FLIST, 2)) {
1729: rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1730: who_am_i(), ndx);
1731: }
1.1.1.3 misho 1732: flist = recv_file_list(iobuf.in_fd, ndx);
1.1.1.2 misho 1733: flist->parent_ndx = ndx;
1734: #ifdef SUPPORT_HARD_LINKS
1735: if (preserve_hard_links)
1736: match_hard_links(flist);
1737: #endif
1738: flist_receiving_enabled = True;
1739: }
1740: }
1.1 misho 1741: }
1742:
1743: unsigned short read_shortint(int f)
1744: {
1745: char b[2];
1.1.1.2 misho 1746: read_buf(f, b, 2);
1.1 misho 1747: return (UVAL(b, 1) << 8) + UVAL(b, 0);
1748: }
1749:
1750: int32 read_int(int f)
1751: {
1752: char b[4];
1753: int32 num;
1754:
1.1.1.2 misho 1755: read_buf(f, b, 4);
1.1 misho 1756: num = IVAL(b, 0);
1757: #if SIZEOF_INT32 > 4
1758: if (num & (int32)0x80000000)
1759: num |= ~(int32)0xffffffff;
1760: #endif
1761: return num;
1762: }
1763:
1764: int32 read_varint(int f)
1765: {
1766: union {
1.1.1.2 misho 1767: char b[5];
1768: int32 x;
1.1 misho 1769: } u;
1770: uchar ch;
1771: int extra;
1772:
1773: u.x = 0;
1.1.1.2 misho 1774: ch = read_byte(f);
1.1 misho 1775: extra = int_byte_extra[ch / 4];
1776: if (extra) {
1777: uchar bit = ((uchar)1<<(8-extra));
1778: if (extra >= (int)sizeof u.b) {
1779: rprintf(FERROR, "Overflow in read_varint()\n");
1780: exit_cleanup(RERR_STREAMIO);
1781: }
1.1.1.2 misho 1782: read_buf(f, u.b, extra);
1.1 misho 1783: u.b[extra] = ch & (bit-1);
1784: } else
1785: u.b[0] = ch;
1786: #if CAREFUL_ALIGNMENT
1787: u.x = IVAL(u.b,0);
1788: #endif
1789: #if SIZEOF_INT32 > 4
1790: if (u.x & (int32)0x80000000)
1791: u.x |= ~(int32)0xffffffff;
1792: #endif
1793: return u.x;
1794: }
1795:
1796: int64 read_varlong(int f, uchar min_bytes)
1797: {
1798: union {
1.1.1.2 misho 1799: char b[9];
1800: int64 x;
1.1 misho 1801: } u;
1802: char b2[8];
1803: int extra;
1804:
1805: #if SIZEOF_INT64 < 8
1806: memset(u.b, 0, 8);
1807: #else
1808: u.x = 0;
1809: #endif
1.1.1.2 misho 1810: read_buf(f, b2, min_bytes);
1.1 misho 1811: memcpy(u.b, b2+1, min_bytes-1);
1812: extra = int_byte_extra[CVAL(b2, 0) / 4];
1813: if (extra) {
1814: uchar bit = ((uchar)1<<(8-extra));
1815: if (min_bytes + extra > (int)sizeof u.b) {
1816: rprintf(FERROR, "Overflow in read_varlong()\n");
1817: exit_cleanup(RERR_STREAMIO);
1818: }
1.1.1.2 misho 1819: read_buf(f, u.b + min_bytes - 1, extra);
1.1 misho 1820: u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1821: #if SIZEOF_INT64 < 8
1822: if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1823: rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1824: exit_cleanup(RERR_UNSUPPORTED);
1825: }
1826: #endif
1827: } else
1828: u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1829: #if SIZEOF_INT64 < 8
1830: u.x = IVAL(u.b,0);
1831: #elif CAREFUL_ALIGNMENT
1.1.1.3 misho 1832: u.x = IVAL64(u.b,0);
1.1 misho 1833: #endif
1834: return u.x;
1835: }
1836:
1837: int64 read_longint(int f)
1838: {
1839: #if SIZEOF_INT64 >= 8
1840: char b[9];
1841: #endif
1842: int32 num = read_int(f);
1843:
1844: if (num != (int32)0xffffffff)
1845: return num;
1846:
1847: #if SIZEOF_INT64 < 8
1848: rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1849: exit_cleanup(RERR_UNSUPPORTED);
1850: #else
1.1.1.2 misho 1851: read_buf(f, b, 8);
1.1 misho 1852: return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1853: #endif
1854: }
1855:
1856: void read_buf(int f, char *buf, size_t len)
1857: {
1.1.1.2 misho 1858: if (f != iobuf.in_fd) {
1859: if (safe_read(f, buf, len) != len)
1860: whine_about_eof(False); /* Doesn't return. */
1861: goto batch_copy;
1862: }
1863:
1864: if (!IN_MULTIPLEXED) {
1865: raw_read_buf(buf, len);
1866: total_data_read += len;
1867: if (forward_flist_data)
1868: write_buf(iobuf.out_fd, buf, len);
1869: batch_copy:
1870: if (f == write_batch_monitor_in)
1871: safe_write(batch_fd, buf, len);
1872: return;
1873: }
1874:
1875: while (1) {
1876: size_t siz;
1877:
1878: while (!iobuf.raw_input_ends_before)
1879: read_a_msg();
1880:
1881: siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1882: if (siz >= iobuf.in.size)
1883: siz = iobuf.in.size;
1884: raw_read_buf(buf, siz);
1885: total_data_read += siz;
1886:
1887: if (forward_flist_data)
1888: write_buf(iobuf.out_fd, buf, siz);
1889:
1890: if (f == write_batch_monitor_in)
1891: safe_write(batch_fd, buf, siz);
1892:
1893: if ((len -= siz) == 0)
1894: break;
1895: buf += siz;
1896: }
1.1 misho 1897: }
1898:
1899: void read_sbuf(int f, char *buf, size_t len)
1900: {
1.1.1.2 misho 1901: read_buf(f, buf, len);
1.1 misho 1902: buf[len] = '\0';
1903: }
1904:
1905: uchar read_byte(int f)
1906: {
1907: uchar c;
1.1.1.2 misho 1908: read_buf(f, (char*)&c, 1);
1.1 misho 1909: return c;
1910: }
1911:
1912: int read_vstring(int f, char *buf, int bufsize)
1913: {
1914: int len = read_byte(f);
1915:
1916: if (len & 0x80)
1917: len = (len & ~0x80) * 0x100 + read_byte(f);
1918:
1919: if (len >= bufsize) {
1920: rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1921: len, bufsize - 1);
1922: return -1;
1923: }
1924:
1925: if (len)
1.1.1.2 misho 1926: read_buf(f, buf, len);
1.1 misho 1927: buf[len] = '\0';
1928: return len;
1929: }
1930:
1931: /* Populate a sum_struct with values from the socket. This is
1932: * called by both the sender and the receiver. */
1933: void read_sum_head(int f, struct sum_struct *sum)
1934: {
1935: int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1936: sum->count = read_int(f);
1937: if (sum->count < 0) {
1938: rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1939: (long)sum->count, who_am_i());
1940: exit_cleanup(RERR_PROTOCOL);
1941: }
1942: sum->blength = read_int(f);
1943: if (sum->blength < 0 || sum->blength > max_blength) {
1944: rprintf(FERROR, "Invalid block length %ld [%s]\n",
1945: (long)sum->blength, who_am_i());
1946: exit_cleanup(RERR_PROTOCOL);
1947: }
1948: sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1949: if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1950: rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1951: sum->s2length, who_am_i());
1952: exit_cleanup(RERR_PROTOCOL);
1953: }
1954: sum->remainder = read_int(f);
1955: if (sum->remainder < 0 || sum->remainder > sum->blength) {
1956: rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1957: (long)sum->remainder, who_am_i());
1958: exit_cleanup(RERR_PROTOCOL);
1959: }
1960: }
1961:
1962: /* Send the values from a sum_struct over the socket. Set sum to
1963: * NULL if there are no checksums to send. This is called by both
1964: * the generator and the sender. */
1965: void write_sum_head(int f, struct sum_struct *sum)
1966: {
1967: static struct sum_struct null_sum;
1968:
1969: if (sum == NULL)
1970: sum = &null_sum;
1971:
1972: write_int(f, sum->count);
1973: write_int(f, sum->blength);
1974: if (protocol_version >= 27)
1975: write_int(f, sum->s2length);
1976: write_int(f, sum->remainder);
1977: }
1978:
1.1.1.2 misho 1979: /* Sleep after writing to limit I/O bandwidth usage.
1.1 misho 1980: *
1981: * @todo Rather than sleeping after each write, it might be better to
1982: * use some kind of averaging. The current algorithm seems to always
1983: * use a bit less bandwidth than specified, because it doesn't make up
1984: * for slow periods. But arguably this is a feature. In addition, we
1985: * ought to take the time used to write the data into account.
1986: *
1987: * During some phases of big transfers (file FOO is uptodate) this is
1988: * called with a small bytes_written every time. As the kernel has to
1989: * round small waits up to guarantee that we actually wait at least the
1990: * requested number of microseconds, this can become grossly inaccurate.
1991: * We therefore keep track of the bytes we've written over time and only
1.1.1.2 misho 1992: * sleep when the accumulated delay is at least 1 tenth of a second. */
1.1 misho 1993: static void sleep_for_bwlimit(int bytes_written)
1994: {
1995: static struct timeval prior_tv;
1996: static long total_written = 0;
1997: struct timeval tv, start_tv;
1998: long elapsed_usec, sleep_usec;
1999:
2000: #define ONE_SEC 1000000L /* # of microseconds in a second */
2001:
2002: total_written += bytes_written;
2003:
2004: gettimeofday(&start_tv, NULL);
2005: if (prior_tv.tv_sec) {
2006: elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
2007: + (start_tv.tv_usec - prior_tv.tv_usec);
2008: total_written -= (int64)elapsed_usec * bwlimit / (ONE_SEC/1024);
2009: if (total_written < 0)
2010: total_written = 0;
2011: }
2012:
2013: sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
2014: if (sleep_usec < ONE_SEC / 10) {
2015: prior_tv = start_tv;
2016: return;
2017: }
2018:
2019: tv.tv_sec = sleep_usec / ONE_SEC;
2020: tv.tv_usec = sleep_usec % ONE_SEC;
2021: select(0, NULL, NULL, NULL, &tv);
2022:
2023: gettimeofday(&prior_tv, NULL);
2024: elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
2025: + (prior_tv.tv_usec - start_tv.tv_usec);
2026: total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
2027: }
2028:
1.1.1.4 ! misho 2029: void io_flush(int flush_type)
1.1 misho 2030: {
1.1.1.2 misho 2031: if (iobuf.out.len > iobuf.out_empty_len) {
1.1.1.4 ! misho 2032: if (flush_type == FULL_FLUSH) /* flush everything in the output buffers */
1.1.1.2 misho 2033: perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1.1.1.4 ! misho 2034: else if (flush_type == NORMAL_FLUSH) /* flush at least 1 byte */
1.1.1.2 misho 2035: perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1.1.1.4 ! misho 2036: /* MSG_FLUSH: flush iobuf.msg only */
1.1 misho 2037: }
1.1.1.2 misho 2038: if (iobuf.msg.len)
2039: perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1.1 misho 2040: }
2041:
2042: void write_shortint(int f, unsigned short x)
2043: {
2044: char b[2];
2045: b[0] = (char)x;
2046: b[1] = (char)(x >> 8);
1.1.1.2 misho 2047: write_buf(f, b, 2);
1.1 misho 2048: }
2049:
2050: void write_int(int f, int32 x)
2051: {
2052: char b[4];
2053: SIVAL(b, 0, x);
1.1.1.2 misho 2054: write_buf(f, b, 4);
1.1 misho 2055: }
2056:
2057: void write_varint(int f, int32 x)
2058: {
2059: char b[5];
2060: uchar bit;
1.1.1.4 ! misho 2061: int cnt;
1.1 misho 2062:
2063: SIVAL(b, 1, x);
2064:
1.1.1.4 ! misho 2065: for (cnt = 4; cnt > 1 && b[cnt] == 0; cnt--) {}
1.1 misho 2066: bit = ((uchar)1<<(7-cnt+1));
1.1.1.4 ! misho 2067:
1.1 misho 2068: if (CVAL(b, cnt) >= bit) {
2069: cnt++;
2070: *b = ~(bit-1);
2071: } else if (cnt > 1)
2072: *b = b[cnt] | ~(bit*2-1);
2073: else
1.1.1.4 ! misho 2074: *b = b[1];
1.1 misho 2075:
1.1.1.2 misho 2076: write_buf(f, b, cnt);
1.1 misho 2077: }
2078:
2079: void write_varlong(int f, int64 x, uchar min_bytes)
2080: {
2081: char b[9];
2082: uchar bit;
2083: int cnt = 8;
2084:
2085: #if SIZEOF_INT64 >= 8
1.1.1.3 misho 2086: SIVAL64(b, 1, x);
1.1 misho 2087: #else
1.1.1.3 misho 2088: SIVAL(b, 1, x);
1.1 misho 2089: if (x <= 0x7FFFFFFF && x >= 0)
2090: memset(b + 5, 0, 4);
2091: else {
2092: rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
2093: exit_cleanup(RERR_UNSUPPORTED);
2094: }
2095: #endif
2096:
2097: while (cnt > min_bytes && b[cnt] == 0)
2098: cnt--;
2099: bit = ((uchar)1<<(7-cnt+min_bytes));
2100: if (CVAL(b, cnt) >= bit) {
2101: cnt++;
2102: *b = ~(bit-1);
2103: } else if (cnt > min_bytes)
2104: *b = b[cnt] | ~(bit*2-1);
2105: else
2106: *b = b[cnt];
2107:
1.1.1.2 misho 2108: write_buf(f, b, cnt);
1.1 misho 2109: }
2110:
2111: /*
2112: * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
2113: * 64-bit types on this platform.
2114: */
2115: void write_longint(int f, int64 x)
2116: {
2117: char b[12], * const s = b+4;
2118:
2119: SIVAL(s, 0, x);
2120: if (x <= 0x7FFFFFFF && x >= 0) {
1.1.1.2 misho 2121: write_buf(f, s, 4);
1.1 misho 2122: return;
2123: }
2124:
2125: #if SIZEOF_INT64 < 8
2126: rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
2127: exit_cleanup(RERR_UNSUPPORTED);
2128: #else
2129: memset(b, 0xFF, 4);
2130: SIVAL(s, 4, x >> 32);
1.1.1.2 misho 2131: write_buf(f, b, 12);
1.1 misho 2132: #endif
2133: }
2134:
1.1.1.3 misho 2135: void write_bigbuf(int f, const char *buf, size_t len)
2136: {
2137: size_t half_max = (iobuf.out.size - iobuf.out_empty_len) / 2;
2138:
2139: while (len > half_max + 1024) {
2140: write_buf(f, buf, half_max);
2141: buf += half_max;
2142: len -= half_max;
2143: }
2144:
2145: write_buf(f, buf, len);
2146: }
2147:
1.1 misho 2148: void write_buf(int f, const char *buf, size_t len)
2149: {
1.1.1.2 misho 2150: size_t pos, siz;
2151:
2152: if (f != iobuf.out_fd) {
2153: safe_write(f, buf, len);
2154: goto batch_copy;
2155: }
2156:
2157: if (iobuf.out.len + len > iobuf.out.size)
2158: perform_io(len, PIO_NEED_OUTROOM);
2159:
2160: pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
2161: if (pos >= iobuf.out.size)
2162: pos -= iobuf.out.size;
2163:
2164: /* Handle a split copy if we wrap around the end of the circular buffer. */
2165: if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
2166: memcpy(iobuf.out.buf + pos, buf, siz);
2167: memcpy(iobuf.out.buf, buf + siz, len - siz);
2168: } else
2169: memcpy(iobuf.out.buf + pos, buf, len);
2170:
2171: iobuf.out.len += len;
2172: total_data_written += len;
2173:
2174: batch_copy:
2175: if (f == write_batch_monitor_out)
2176: safe_write(batch_fd, buf, len);
1.1 misho 2177: }
2178:
1.1.1.2 misho 2179: /* Write a string to the connection */
1.1 misho 2180: void write_sbuf(int f, const char *buf)
2181: {
1.1.1.2 misho 2182: write_buf(f, buf, strlen(buf));
1.1 misho 2183: }
2184:
2185: void write_byte(int f, uchar c)
2186: {
1.1.1.2 misho 2187: write_buf(f, (char *)&c, 1);
1.1 misho 2188: }
2189:
2190: void write_vstring(int f, const char *str, int len)
2191: {
2192: uchar lenbuf[3], *lb = lenbuf;
2193:
2194: if (len > 0x7F) {
2195: if (len > 0x7FFF) {
2196: rprintf(FERROR,
2197: "attempting to send over-long vstring (%d > %d)\n",
2198: len, 0x7FFF);
2199: exit_cleanup(RERR_PROTOCOL);
2200: }
2201: *lb++ = len / 0x100 + 0x80;
2202: }
2203: *lb = len;
2204:
1.1.1.2 misho 2205: write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1.1 misho 2206: if (len)
1.1.1.2 misho 2207: write_buf(f, str, len);
1.1 misho 2208: }
2209:
2210: /* Send a file-list index using a byte-reduction method. */
2211: void write_ndx(int f, int32 ndx)
2212: {
2213: static int32 prev_positive = -1, prev_negative = 1;
2214: int32 diff, cnt = 0;
2215: char b[6];
2216:
2217: if (protocol_version < 30 || read_batch) {
2218: write_int(f, ndx);
2219: return;
2220: }
2221:
2222: /* Send NDX_DONE as a single-byte 0 with no side effects. Send
2223: * negative nums as a positive after sending a leading 0xFF. */
2224: if (ndx >= 0) {
2225: diff = ndx - prev_positive;
2226: prev_positive = ndx;
2227: } else if (ndx == NDX_DONE) {
2228: *b = 0;
1.1.1.2 misho 2229: write_buf(f, b, 1);
1.1 misho 2230: return;
2231: } else {
2232: b[cnt++] = (char)0xFF;
2233: ndx = -ndx;
2234: diff = ndx - prev_negative;
2235: prev_negative = ndx;
2236: }
2237:
2238: /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
2239: * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
2240: * & all 4 bytes of the (non-negative) num with the high-bit set. */
2241: if (diff < 0xFE && diff > 0)
2242: b[cnt++] = (char)diff;
2243: else if (diff < 0 || diff > 0x7FFF) {
2244: b[cnt++] = (char)0xFE;
2245: b[cnt++] = (char)((ndx >> 24) | 0x80);
2246: b[cnt++] = (char)ndx;
2247: b[cnt++] = (char)(ndx >> 8);
2248: b[cnt++] = (char)(ndx >> 16);
2249: } else {
2250: b[cnt++] = (char)0xFE;
2251: b[cnt++] = (char)(diff >> 8);
2252: b[cnt++] = (char)diff;
2253: }
1.1.1.2 misho 2254: write_buf(f, b, cnt);
1.1 misho 2255: }
2256:
2257: /* Receive a file-list index using a byte-reduction method. */
2258: int32 read_ndx(int f)
2259: {
2260: static int32 prev_positive = -1, prev_negative = 1;
2261: int32 *prev_ptr, num;
2262: char b[4];
2263:
2264: if (protocol_version < 30)
2265: return read_int(f);
2266:
1.1.1.2 misho 2267: read_buf(f, b, 1);
1.1 misho 2268: if (CVAL(b, 0) == 0xFF) {
1.1.1.2 misho 2269: read_buf(f, b, 1);
1.1 misho 2270: prev_ptr = &prev_negative;
2271: } else if (CVAL(b, 0) == 0)
2272: return NDX_DONE;
2273: else
2274: prev_ptr = &prev_positive;
2275: if (CVAL(b, 0) == 0xFE) {
1.1.1.2 misho 2276: read_buf(f, b, 2);
1.1 misho 2277: if (CVAL(b, 0) & 0x80) {
2278: b[3] = CVAL(b, 0) & ~0x80;
2279: b[0] = b[1];
1.1.1.2 misho 2280: read_buf(f, b+1, 2);
1.1 misho 2281: num = IVAL(b, 0);
2282: } else
2283: num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2284: } else
2285: num = UVAL(b, 0) + *prev_ptr;
2286: *prev_ptr = num;
2287: if (prev_ptr == &prev_negative)
2288: num = -num;
2289: return num;
2290: }
2291:
2292: /* Read a line of up to bufsiz-1 characters into buf. Strips
2293: * the (required) trailing newline and all carriage returns.
2294: * Returns 1 for success; 0 for I/O error or truncation. */
1.1.1.2 misho 2295: int read_line_old(int fd, char *buf, size_t bufsiz, int eof_ok)
1.1 misho 2296: {
1.1.1.2 misho 2297: assert(fd != iobuf.in_fd);
1.1 misho 2298: bufsiz--; /* leave room for the null */
2299: while (bufsiz > 0) {
1.1.1.2 misho 2300: if (safe_read(fd, buf, 1) == 0) {
2301: if (eof_ok)
2302: break;
1.1 misho 2303: return 0;
1.1.1.2 misho 2304: }
2305: if (*buf == '\0')
2306: return 0;
2307: if (*buf == '\n')
1.1 misho 2308: break;
1.1.1.2 misho 2309: if (*buf != '\r') {
1.1 misho 2310: buf++;
2311: bufsiz--;
2312: }
2313: }
2314: *buf = '\0';
2315: return bufsiz > 0;
2316: }
2317:
2318: void io_printf(int fd, const char *format, ...)
2319: {
2320: va_list ap;
2321: char buf[BIGPATHBUFLEN];
2322: int len;
2323:
2324: va_start(ap, format);
2325: len = vsnprintf(buf, sizeof buf, format, ap);
2326: va_end(ap);
2327:
2328: if (len < 0)
1.1.1.2 misho 2329: exit_cleanup(RERR_PROTOCOL);
1.1 misho 2330:
1.1.1.3 misho 2331: if (len >= (int)sizeof buf) {
1.1 misho 2332: rprintf(FERROR, "io_printf() was too long for the buffer.\n");
1.1.1.2 misho 2333: exit_cleanup(RERR_PROTOCOL);
1.1 misho 2334: }
2335:
2336: write_sbuf(fd, buf);
2337: }
2338:
1.1.1.2 misho 2339: /* Setup for multiplexing a MSG_* stream with the data stream. */
2340: void io_start_multiplex_out(int fd)
1.1 misho 2341: {
1.1.1.2 misho 2342: io_flush(FULL_FLUSH);
1.1 misho 2343:
1.1.1.4 ! misho 2344: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 2345: rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2346:
2347: if (!iobuf.msg.buf)
2348: alloc_xbuf(&iobuf.msg, ROUND_UP_1024(IO_BUFFER_SIZE));
2349:
2350: iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2351: io_start_buffering_out(fd);
2352: got_kill_signal = 0;
2353:
2354: iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2355: iobuf.out.len += 4;
1.1 misho 2356: }
2357:
1.1.1.2 misho 2358: /* Setup for multiplexing a MSG_* stream with the data stream. */
2359: void io_start_multiplex_in(int fd)
1.1 misho 2360: {
1.1.1.4 ! misho 2361: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 2362: rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2363:
2364: iobuf.in_multiplexed = 1; /* See also IN_MULTIPLEXED */
2365: io_start_buffering_in(fd);
1.1 misho 2366: }
2367:
1.1.1.2 misho 2368: int io_end_multiplex_in(int mode)
1.1 misho 2369: {
1.1.1.2 misho 2370: int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2371:
1.1.1.4 ! misho 2372: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 2373: rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2374:
2375: iobuf.in_multiplexed = 0;
2376: if (mode == MPLX_SWITCHING)
2377: iobuf.raw_input_ends_before = 0;
2378: else
2379: assert(iobuf.raw_input_ends_before == 0);
2380: if (mode != MPLX_TO_BUFFERED)
2381: io_end_buffering_in(mode);
2382:
2383: return ret;
1.1 misho 2384: }
2385:
1.1.1.2 misho 2386: int io_end_multiplex_out(int mode)
1.1 misho 2387: {
1.1.1.2 misho 2388: int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2389:
1.1.1.4 ! misho 2390: if (msgs2stderr == 1 && DEBUG_GTE(IO, 2))
1.1.1.2 misho 2391: rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2392:
2393: if (mode != MPLX_TO_BUFFERED)
2394: io_end_buffering_out(mode);
2395: else
2396: io_flush(FULL_FLUSH);
2397:
2398: iobuf.out.len = 0;
2399: iobuf.out_empty_len = 0;
2400: if (got_kill_signal > 0) /* Just in case... */
2401: handle_kill_signal(False);
2402: got_kill_signal = -1;
2403:
2404: return ret;
1.1 misho 2405: }
2406:
2407: void start_write_batch(int fd)
2408: {
2409: /* Some communication has already taken place, but we don't
2410: * enable batch writing until here so that we can write a
2411: * canonical record of the communication even though the
2412: * actual communication so far depends on whether a daemon
2413: * is involved. */
2414: write_int(batch_fd, protocol_version);
2415: if (protocol_version >= 30)
1.1.1.4 ! misho 2416: write_varint(batch_fd, compat_flags);
1.1 misho 2417: write_int(batch_fd, checksum_seed);
2418:
2419: if (am_sender)
2420: write_batch_monitor_out = fd;
2421: else
2422: write_batch_monitor_in = fd;
2423: }
2424:
2425: void stop_write_batch(void)
2426: {
2427: write_batch_monitor_out = -1;
2428: write_batch_monitor_in = -1;
2429: }
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to io.c CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / rsync