Annotation of embedaddon/rsync/rsyncdb.1.md, revision 1.1.1.1
1.1 misho 1: # NAME
2:
3: rsyncdb - Maintain an rsync checksum DB
4:
5: # SYNOPSIS
6:
7: ```
8: rsyncdb --db=CONFIG [OPTION...] [DIR...]
9: ```
10:
11: # DESCRIPTION
12:
13: Rsyncdb can maintain a checksum-caching DB that rsync can use to make its
14: `--checksum` option more optimal. You must specify a config file via
15: the `--db=CONFIG_FILE` option in order for rsyncdb to know what DB to
16: manipulate. See the rsync manpage's `--db` option for full details on
17: the file's format.
18:
19: You can specify one or more directory args for rsyncdb to scan. If no
20: DIR args are specified, the current directory is assumed to be the spot
21: to start scanning.
22:
23: Note that the rsyncdb program is usually just a symlink to the rsync program.
24: You can force rsync to behave as rsyncdb either by having a symlink (or
25: hardlink) name that ends with "db" or by `starting` the rsync args with
26: `--db-only=CONFIG` (and that option works just like `--db=CONFIG` to
27: a program named rsyncdb).
28:
29: # EXAMPLES
30:
31: The following command will update checksum information in the database
32: described in the /etc/db.conf file:
33:
34: > rsyncdb --db=/etc/db.conf -o n --clean /dir1 /dir2
35:
36: It scans 2 directory hierarchies (/dir1 & /dir2) and cleans out any
37: checksums whose inodes are no longer found in those directories (so that
38: directory args are presumed to be complete for this host's DB contents).
39:
40: The following command will scan all the files in the /dir2 directory (without
41: recursive scanning, due to the `--no-r` option) and check them against
42: the DB:
43:
44: > rsyncdb --db=/etc/db.conf --check --no-r /dir2
45:
46: Any errors found are output as well as being fixed in the DB. (See
47: `--no-update` for how to check without updating.)
48:
49: The following command will output MD5 sums for all the files found in the
50: directories mentioned, even if they are unchanged (due to the
51: `--output=us` option):
52:
53: > rsyncdb --db=/etc/db.conf -rous /dir* >/tmp/md5sums.txt
54:
55: This is just like running md5sum, only faster. Unlike md5sum, you can't
56: specify a single file, so use `--no-r` and grep the output if you just
57: want to see a single file's value.
58:
59: The following command initializes a new DB, and is required for any new DB:
60:
61: > rsyncdb --db=/etc/db.conf --init --mounts
62:
63: The `--init` option should only be used once (unless you want to
64: destroy existing data). The `--mounts` option may need to be used
65: periodically, and makes use of a helper script (see below).
66:
67: # OPTIONS SUMMARY
68:
69: Rsyncdb accepts the following options:
70:
71: [comment]: # (help-rsyncdb.h)
72:
73: ```
74: --db=CONFIG Specify the CONFIG file to read for the DB info
75: --db-lax Ignore ctime changes (use with CAUTION)
76: --recursive, -r Scan files in subdirs (the default w/o --no-recursive)
77: --sums=SUMS, -s List which checksums to update (default: 4,5)
78: --output=STR, -o One or more letters of what to output (default: "")
79: --check, -c Check checksums (by reading the files) and fix any
80: issues. Makes --output default to "dni".
81: --clean Note all inodes in the DIRS and remove DB extras
82: --no-update, -N Avoids updating/adding info w/--check and/or --clean
83: --init Initialize a DB by (re-)creating its tables
84: --mounts Scan for mounted filesystems and update the DB
85: --quiet, -q Disable the default non-error output
86: --help, -h Display this help message
87: ```
88:
89: # OPTIONS
90:
91: Rsyncdb accepts both long (double-dash + word) and short (single-dash + letter)
92: options. The full list of the available options are described below. If an
93: option can be specified in more than one way, the choices are comma-separated.
94: Some options only have a long variant, not a short. If the option takes a
95: parameter, the parameter is only listed after the long variant, even though it
96: must also be specified for the short. When specifying a parameter, you can
97: either use the form --option=param or replace the '=' with whitespace. The
98: parameter may need to be quoted in some manner for it to survive the shell's
99: command-line parsing.
100:
101: 0. `--db=CONFIG_FILE`
102:
103: This tells rsyncdb what DB-config file to read for the DB setup. This is
104: the same as the option in rsync, so refer to that manpage for full details.
105:
106: 0. `--db-lax`
107:
108: This option works just like it does in rsync, so refer to that manpage for
109: full details.
110:
111: 0. `--no-recursive, --no-r`
112:
113: This disables the default recursive directory scan that is performed on the
114: listed directory args. The options `--recursive` and `-r` are also
115: accepted, if someone wants to override an earlier `--no-r` override.
116:
117: 0. `--sums=SUMS, -s`
118:
119: Only output/update the listed checksum types. By default we deal with just
120: the newer md5 checksums (i.e. `--sums=5`).
121:
122: Note that this option does NOT affect the order that checksums are output
123: if "-o s" is enabled, so `-s5,4` is the same as `-s4,5`.
124:
125: 0. `--output=STR, -o`
126:
127: The output option lets you specify one or more letters indicating what
128: information should be output. If `--output` is not specified, the default
129: is either "dn" or (with `--check`) "dni".
130:
131: The following letters are accepted in the string:
132:
133: - `d` outputs "... dir_name ..." lines for each directory in our scan. if
134: "d" is omitted, then this progress indictor is not output.
135: - `n` includes the file's name in the per-file output. These lines are only
136: output for changed files unless "u" is given. The "n" option is implied
137: by every other output option letter except "d".
138: - `s` includes the checksum info in the per-file output.
139: - `c` is a synonym for 's'.
140: - `i` includes itemized change info in the per-file output.
141: - `!i` indicates that the time and/or size is wrong.
142: - `+4` indicates the MD4 sum is missing.
143: - `+5` indicates the MD5 sum is missing.
144: - `!4` indicates the MD4 sum is wrong.
145: - `!5` indicates the MD5 sum is wrong.
146: - `?4` indicates an unknown MD4 difference. This can happen if we didn't
147: need to read the file; i.e. if the time/size is wrong and no sum info
148: was requested.
149: - `?5` indicates an unknown MD5 difference.
150: - `u` includes unchanged files in the per-file output lines.
151:
152: 0. `--check, -c`
153:
154: Check the checksums (forcing the reading of all the files) and fix any
155: issues that are found. Makes `--output` default to "dni".
156:
157: 0. `--clean`
158:
159: Makes a temp-DB of all the inodes that we find in all the listed
160: directories and removes any extraneous checksums from the DB. You will
161: need to specify all the mounted directories that are present (and listed as
162: mounted) in the DB on this host or else the checksums from the unvisited
163: directories will be discarded from the DB. If you want to just --clean
164: without adding or updating the info of new or changed files, specify
165: `--no-update` as well.
166:
167: 0. `--no-update, -N`
168:
169: Avoids updating/adding info with `--check` and/or `--clean`.
170:
171: 0. `--quiet, -q`
172:
173: Disable the default (non-error) output settings. This turns off the
174: messages that `--init`, `--mount`, and `--clean` output, and makes the
175: default for `--output` be nothing (though an explicit `--output` option is
176: not affected).
177:
178: 0. `--init`
179:
180: Create the tables in the DB. If it is used on an existing DB, all the
181: existing tables are dropped and re-created.
182:
183: This option cannot be combined with the updating or reporting of checksum
184: information, but may be combined with `--mounts`.
185:
186: 0. `--mounts`
187:
188: Populate the "disk" DB with the available device numbers and change any
189: mounted/unmount information for devices. This should be run every time a
190: mount-change happens that may affect a directory hierarchy in the DB.
191: Rsyncdb will not save any checksums for a device that is not listed in the
192: "disk" table.
193:
194: The helper script "rsyncdb-mountinfo" is used as the source of the mount
195: information on the host, which it derives from various system files and
196: UUID directories (if available). That script supports the use of an
197: override file named ".rsyncdb_mount_uniq" in the root of the mount as one
198: way to manually assign unique values to a shared (mountable) device's
199: various disks.
200:
201: Some advanced users may want to maintain the disk table themselves in order
202: to support mounting a drive in different (or multiple) locations, etc.
203:
204: Specifying the `--mounts` option cannot be combined with updating or
205: reporting of checksum information, but may be combined with `--init`.
206:
207: 0. `--help, -h`
208:
209: Display a summary of the options.
210:
211: # SEE ALSO
212:
213: **rsync**(1)
214:
215: # AUTHOR
216:
217: Rsyncdb was written by Wayne Davison.
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to rsyncdb.1.md CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / rsync