Annotation of embedaddon/smartmontools/ChangeLog-5.0-6.0, revision 1.1.1.1
1.1 misho 1: CHANGELOG for smartmontools 5.0 to 6.0
2:
3: $Id: ChangeLog-5.0-6.0 3645 2012-10-10 16:15:26Z chrfranke $
4:
5: Maintainers / Developers Key (alphabetic order):
6: [AS] Alex Samorukov
7: [BA] Bruce Allen
8: [OB] Oliver Bock
9: [EB] Erik Inge Bolsř
10: [SB] Stanislav Brabec
11: [PC] Peter Cassidy
12: [MC] Matthieu Castet
13: [YD] Yuri Dario
14: [CD] Casper Dik
15: [CF] Christian Franke
16: [GF] Guilhem Frézou
17: [DG] Douglas Gilbert
18: [GG] Guido Guenther
19: [JPH] Jordan Powell Hargrave
20: [JH] Joerg Hering
21: [GK] Geoff Keating
22: [DK] Dr. David Kirkby
23: [DL] Dan Lukes
24: [KM] Kai Mäkisara
25: [EM] Eduard Martinescu
26: [FM] Frédéric L. W. Meunier
27: [GP] Gabriele Pohl
28: [AR] Adam Radford
29: [KS] Keiji Sawada
30: [MS] Manfred Schwarb
31: [TS] Tomas Smetana
32: [DS] David Snyder
33: [SS] Sergey Svishchev
34: [PW] Phil Williams
35: [LW] Leon Woestenberg
36: [SZ] Shengfeng Zhou
37: [RZ] Richard Zybert
38:
39: <DEVELOPERS: ADDITIONS TO THE CHANGE LOG GO JUST BELOW HERE, PLEASE>
40:
41: smartmontools 6.0 2012-10-10
42:
43: [CF] do_release: Fix for minor rev number 0.
44:
45: [CF] drivedb.h updates:
46: - SandForce Driven SSDs: Corsair Force 115GB
47: - Hitachi Ultrastar 7K4000
48: - Seagate Barracuda 7200.7 and 7200.7 Plus: IBM OEM variants
49: - Western Digital Caviar Black (AF)
50:
51: [CF] man pages: Update introduction. Update ATA standards.
52: Remove some outdated info.
53:
54: [CF] man pages: Unify license headers.
55:
56: [CF] smartctl: Do not abort SCT status output on unknown temperature
57: history format version.
58:
59: [CF] smartctl: Remove duplicate note about selective self-test log
60: version.
61:
62: [CF] smartctl: Add '-l devstat' to '-x, --xall' output.
63:
64: [CF] smartctl: Rework ATA error messages and 'not supported' messages.
65: Avoid misleading warnings on unsupported features (ticket #182).
66: Avoid duplicate error messages.
67:
68: [CF] atacmds.h: Remove nonexistent functions.
69:
70: [CF] Windows installer: Add support for /S(ilent) install/uninstall.
71:
72: [CF] Windows installer: Update examples. Remove some doc shortcuts.
73:
74: [CF] Prepare release 6.0. Change Copyright output line.
75: Change AUTHORS sections on man pages.
76:
77: [CF] smartctl: Rework "ATA Version" output. Print major and minor
78: revision in one output line. Remove "ATA Standard" line.
79:
80: [CF] drivedb.h updates:
81: - Add firmware warnings for various Seagate series (ticket #239):
82: DiamondMax 23, Barracuda 7200.12, 7200.14 (AF), LP, Green (AF)
83: - Seagate Barracuda 7200.14 (AF): 2.5TB
84:
85: [CF] drivedb.h updates:
86: - SandForce Driven SSDs: SanDisk Extreme
87: - Indilinx Everest/Martini based SSDs: OCZ-VERTEX4,
88: fix Attribute 232
89: - STEC Mach2 CompactFlash Cards
90: - Toshiba 2.5" HDD MK..55GSX: *55GSXF variants
91: - Western Digital VelociRaptor (AF)
92:
93: [CF] Windows: Remove EXPERIMENTAL notes for 64-bit version.
94:
95: [CF] autogen.sh: automake 1.11.6 and 1.12.3 are OK.
96:
97: [CF] smartctl: Fix '--identify' for big-endian CPUs.
98:
99: [CF] ataidentify.cpp: Document some older (now obsolete) features.
100:
101: [CF] ataidentify.cpp: Add some recent ACS-3 features.
102:
103: [CF] smartctl: Support '-l sataphy' also for Packet interface devices.
104:
105: [CF] atacmds.cpp: Add new ATA ACS-3 minor revision.
106:
107: [CF] smartctl: Print SATA version and speed in '-i' output.
108:
109: [CF] drivedb.h: Minor reordering of Seagate entries.
110:
111: [CF] drivedb.h: Use "AF" for Advanced Format (4KiB LPS).
112:
113: [CF] drivedb.h updates:
114: - Seagate Barracuda SpinPoint F3
115: - SAMSUNG SpinPoint F3 RE
116: - Seagate Barracuda 7200.12: ST3750525AS
117: - Seagate Barracuda 7200.14 (AF): change name, add -v options
118: - Western Digital Red (AF)
119: - USB: Seagate Backup Plus USB 3.0 (0x0bc2:0xa013) (ticket #235)
120: - USB: Seagate Backup Plus Desktop USB 3.0 (0x0bc2:0xa0a4)
121:
122: [CF] os_win32.cpp: Add support for SAS disks behind Areca SAS
123: controllers. This includes SAS/SATA autodetection.
124:
125: Patch was provided by Hank Wu from Areca.
126:
127: [CF] ataidentify.cpp: Add some recent SATA features.
128:
129: [CF] smartctl: Add '--identify[=wnvb]' option.
130: Add new source files ataidentify.h/cpp.
131:
132: [CF] Makefile.am: Reformat lists of sources.
133:
134: [CF] Do not print HDD/SSD specific default attribute names if identify
135: data reports SSD/HDD device.
136:
137: [CF] drivedb.h updates:
138: - Intel 320 and 710 Series SSDs: Set '-F nologdir'
139: - Seagate Barracuda ES.2: Set '-F xerrorlba'
140:
141: [CF] Create branches RELEASE_5_4[0-3]_DRIVEDB with last drivedb.h file
142: compatible with smartmontools 5.4[0-3].
143:
144: [CF] drivedb.h updates:
145: - SAMSUNG SpinPoint M40/60/80: HM120IC
146: - USB: Oxford (0x0928:0x0010)
147: - USB: Seagate External Drive/Cypress (0x0bc2:0x0503)
148: - USB: 0x1f75:0x0888 is Innostor IS888
149:
150: [CF] smartctl: Print nominal media rotation rate in '-i' output (ATA).
151:
152: [CF] knowndrives.cpp: Fix missing '-F xerrorlba' in '-P show' output.
153:
154: [CF] os_win32.cpp: Use WMI to get serial number if
155: IOCTL_STORAGE_QUERY_PROPERTY is used.
156:
157: [CF] os_win32.cpp: Remove more Win9x/ME/NT4 specific code: ATA drive
158: number, GetDevicePowerState() handling.
159:
160: [CF] Add '-F xerrorlba' option/directive.
161:
162: [CF] Rework '-F' option handling. Add support for multiple '-F' options
163: and directives.
164:
165: [CF] Makefile.am: Fix typo in ACLOCAL_AMFLAGS.
166:
167: [CF] smartd.cpp: MailWarning(): Move variable declarations, use sizeof()
168: instead of numbers.
169:
170: [CF] smartd.cpp: Rework dnsname(). Print "[None]" instead of "[Unknown]"
171: if domain is not set. Print NIS domain only if supported.
172:
173: [CF] Windows smartd: Use gethostname/gethostbyname() from winsock.
174: Remove os_win32/hostname_win32.*.
175:
176: [CF] smartd: Include device identify info in warning emails (ticket #185).
177: Add SMARTD_DEVICEINFO environment variable.
178:
179: [CF] Add '-F nologdir' option/directive.
180: Prevents freeze of some Intel SSDs (ticket #214).
181:
182: [CF] smartd: Don't log ignored -W directive as critical.
183:
184: [CF] drivedb.h updates:
185: - Smart Storage Systems Xcel-10 SSDs: Move entry, change name
186: - Samsung: Remove very old and already commented out entries
187: - Seagate Momentus XT (Adv. Format)
188: - WD My Passport: 3 -> 2 entries, add 2TB
189: - USB: Imation (0x0718:0x1000) (ticket #231)
190: - USB: Initio (0x13fd:0x1040): unsupported
191: - USB: ASMedia USB 3.0 (0x174c:0x55aa): unsupported -> -d sat
192: - USB: PQI H560 (0x3538:0x0902) (ticket #232)
193:
194: [CF] smartctl: Override SMART disabled state with '-T permissive'.
195:
196: [CF] os_win32/daemon_win32.cpp: Drop remaining WinNT4 compatibility.
197:
198: [CF] Windows smartd: Add smartd.conf directives '-m console',
199: '-m active', '-m connected'. Send warning messages via
200: WTSSendMessage(). Remove use of MessageBox() which does no
201: longer work for services since Vista/2008.
202:
203: [CF] Fix 'smartctl -P show'. Regression from r3249.
204:
205: [CF] smartd.cpp: Fix setting of temporary environment in MailWarning().
206: Stack space was passed to putenv() but variable was not unset
207: before return. Very old bug introduced 2003 in r1114.
208:
209: [CF] smartd.cpp: Add fflush() to support redirection of debug output
210: (Debian bug 681349).
211:
212: [CF] os_generic.cpp: Add missing int64.h (Debian bug 619208)
213: This obsoletes Debian patch fix-generic.diff.
214:
215: [CF] cciss.cpp: Fix build on GNU/kFreeBSD (Debian bug 676142).
216: This obsoletes Debian kfreebsd.patch.
217:
218: [CF] Windows: Drop backward compatibility with WinNT4.
219:
220: [CF] Windows: Drop backward compatibility with Win9x/ME.
221:
222: smartmontools 5.43 2012-06-30
223:
224: [CF] drivedb.h USB updates:
225: - Toshiba Canvio Basics (0x0480:0xa006)
226: - A-DATA DashDrive (0x125f:0xa94a)
227:
228: [CF] drivedb.h: Hitachi Travelstar 7K500: *A362/3 variants
229:
230: [CF] Windows: Add Windows Server 2012 to get_os_version_str().
231:
232: [CF] drivedb.h updates:
233: - Sandforce Driven SSDs: OWC Mercury Electra 3/6G SSD
234: - Seagate Momentus SpinPoint M8
235: - Hitachi Deskstar 5K4000
236: - Toshiba 2.5" HDD MK..61GSYN
237: - Seagate Barracuda (SATA 3Gb/s, 4K Sectors): 1TB, *DM003-* variant
238:
239: [CF] smartctl.8.in: Note performance impact of self-tests.
240:
241: [CF] os_win32.cpp: Add support for older Areca drivers which used a
242: different target id. Patch was provided by Hank Wu from Areca.
243:
244: [CF] smartctl.8.in: Add info about HP Smart Array controllers.
245: Original patch was provided by Don Brace from HP.
246:
247: [CF] os_freebsd.cpp: add SAT autodetection to '-d cciss,N' device type
248: (ticket #202).
249: Add missing freebsd_areca_device::m_encnum (regression from r3542).
250: Patch was provided by Don Brace from HP.
251:
252: [CF] os_linux.cpp: add SAT autodetection to '-d cciss,N' device type
253: (ticket #202).
254:
255: [CF] Makefile.am: FIXHTML modified for newer man2html versions.
256:
257: [CF] autogen.sh: automake 1.11.5 is OK.
258:
259: [CF] man pages: Minor updates and syntax fixes.
260:
261: [CF] smartd.service.in: Add ExecReload and StandardOutput.
262: Make EnvironmentFile optional (ticket #194).
263:
264: [CF] drivedb.h USB updates:
265: - HP Desktop HD BD07 (0x03f0:0xbd07)
266: - Iomega Prestige Desktop USB 3.0 (0x059b:0x0070)
267: - Prolific PL2507 (0x067b:0x2507): unsupported -> -d usbjmicron,0
268: - WD My Passport USB 3.0 (0x1058:0x0748)
269: - WD My Book Essential USB 3.0 (0x1058:0x1140)
270: - Sharkoon SATA QuickDeck Pro (0x1f75:0x0888): unsupported
271: - Hitachi Touro Desk (0x4971:0x1015)
272:
273: [CF] Move function str_starts_with() to utility.h.
274:
275: [CF] smartctl.8.in, smartd.conf.5.in: Note required Areca SAS firmware version.
276:
277: [CF] INSTALL, smartctl.8.in: Announce OS X SAT SMART Driver (ticket #25).
278:
279: [CF] Add smart_device::is_syscall_unsup().
280:
281: [CF] os_win32.cpp: Avoid ENOTSUP which is not provided by some versions
282: of MinGW.
283:
284: [DG] os_linux.cpp: Fix scsi pass-through SG_INFO_CHECK mask logic
285: (ticket #225)
286:
287: [CF] drivedb.h updates:
288: - Sandforce Driven SSDs: OCZ-NOCTI
289: - Intel 330 Series SSDs (ticket #227)
290:
291: [CF] smartctl.8.in, smartd.conf.5.in: Document '-d areca N[/E]' support
292: for Windows.
293:
294: [CF] os_win32.cpp: Add help text and error messages for '-d areca,N[/E]'.
295:
296: [CF] os_win32.cpp win_areca_device: Disable full 48-bit ATA support.
297: Add missing set_err() calls. Remove unused function and parameter.
298:
299: [CF] os_win32.cpp: Add support for SATA disks behind Areca SATA and SAS
300: controllers. Requires '-d areca,N[/E]' as type and '[/dev/]arcmsrX'
301: as device name.
302:
303: Patch was provided by Hank Wu from Areca.
304:
305: [CF] Windows installer: Make name of checksum file 32-/64-bit specific.
306:
307: [CF] Windows installer: Add support for combined 32-/64-bit installer.
308:
309: [CF] Windows installer: Drop support for UBCD4Win.
310:
311: [AS] os_freebsd.cpp: sync Areca code with linux version by adding optional
312: enclosure number.
313:
314: [CF] smartctl.8.in, smartd.conf.5.in: Add brief doc for '-d areca N/E'.
315:
316: [CF] os_linux.cpp: Add optional enclosure number to '-d areca' option.
317: This adds support for SATA disks behind Areca SAS controllers.
318:
319: Patch was provided by Hank Wu from Areca.
320:
321: [CF] smartctl: Add log addresses and statistics value from ACS-3 revision 2.
322:
323: [CF] drivedb.h updates:
324: - Crucial/Micron RealSSD C300/C400/m4: m4 512GB
325: - Indilinx Everest/Martini based SSDs: OCZ-PETROL
326: - SAMSUNG SpinPoint F4 EG (AFT): Fix link
327: - Seagate Momentus 4200.2: ST960812A
328: - Seagate Momentus 5400.2: ST960821A (from 4200.2)
329: - Seagate Barracuda 7200.12: ST3500413AS
330: - Western Digital RE3 Serial ATA: WD7502ABYS
331: - Western Digital AV-GP: WD....AV[CD]S, split entry
332: - Western Digital AV-GP (Adv. Format): WD10EU[CR]X
333:
334: [CF] autogen.sh: Set svn:eol-style=LF to be compatible with Cygwin bash.
335:
336: [CF] autogen.sh: automake 1.11.3 is OK.
337:
338: [CF] drivedb.h updates:
339: - Sandforce Driven SSDs: Smart Storage Systems XceedSTOR,
340: XceedIOPS2, Xcel-200
341: - Smart Storage Systems XceedSecure2 SSDs
342: - Smart Storage Systems XceedUltraX/Adtron A25FBX SSDs
343: - Smart Storage Systems Adtron A25FB 2xN SSDs
344: - Smart Storage Systems Adtron A25FB 3xN SSDs
345: Original patch was provided by Rusty Carruth
346:
347: [CF] drivedb.h updates:
348: - Remove outdated IBM links
349: - Update all links to Seagate Knowledge Base
350: - Hitachi Deskstar 7K1000.D
351:
352: [CF] drivedb.h USB update:
353: - Seagate Expansion External (0x0bc2:0x3332) (ticket #223)
354:
355: [CF] drivedb.h USB updates:
356: - Samsung Story Station (0x04e8:0x5f05)
357: - Toshiba STOR.E (0x0930:0x0b1b)
358:
359: [CF] smartctl: Add options '-f hex' and '-f hex,[id|val]' to print
360: attribute IDs and/or values as hex.
361:
362: [CF] smartd.8.in: Fix signal name (Debian bug 661801).
363:
364: [CF] Add 'raw56', 'hex56', 'raw24(raw8)' attribute print formats.
365: Change default for Power_On_Hours to 'raw24(raw8)'.
366: This provides more reasonable output for SandForce based devices
367: missing in drivedb.h.
368:
369: [CF] configure.in, Makefile.am: Support new SVN 1.7 working copy format.
370:
371: [CF] drivedb.h update:
372: - Intel 520 Series SSDs: Add units to attributes 241, 242, 249.
373:
374: [AS] drivedb.h: fixed identifier for Seagate SV35 series.
375:
376: [CF] Print command duration in ATA debug output.
377: Add smart_interface::get_timer_usec().
378:
379: [CF] drivedb.h updates:
380: - SandForce Driven SSDs: G.SKILL Phoenix Pro
381: - Intel 520 Series SSDs
382: - SAMSUNG SpinPoint F4 EG: Update firmware download link
383:
384: [CF] drivedb.h updates:
385: - Add comment with default settings.
386: - Samsung based SSDs: Fix attribute 240
387:
388: [CF] Windows: Add Win8 to get_os_version_str().
389:
390: [CF] Windows: Remove MSVC specific pragma, disable warning in project file.
391:
392: [CF] Add '-d sat,auto[,N]' option for controller independent SAT detection.
393:
394: [CF] dev_interface.h: Replace this_is_ata/scsi(*) by hide_ata/scsi(bool).
395:
396: [CF] smartctl: Allow '-d test' in conjunction with other '-d TYPE' options.
397:
398: [AS] FreeBSD: sync init script with one from ports repository.
399:
400: [CF] drivedb.h updates:
401: - SandForce Driven SSDs: ADATA S510
402: - JMicron based SSDs: Toshiba THNSNC128GMLJ
403: - Samsung based SSDs: 830 Series
404: - Hitachi Deskstar E7K1000
405: - Hitachi Ultrastar A7K1000: Fix name, allow trailing characters
406: - Hitachi Ultrastar A7K2000: Remove duplicate entry
407: - Toshiba 2.5" HDD MK..55GSX
408: - Western Digital AV-GP: WD..EURS variants
409:
410: [CF] drivedb.h USB updates:
411: - Buffalo MiniStation HD-PCTU2 (0x0411:0x01d9) (ticket #211)
412: - Philips SDE3273VC/97 (0x0471:0x2021) (ticket #212)
413: - Samsung M2 Portable 3.0 (0x04e8:0x60c5)
414: - Iomega GDHDU2 (0x059b:0x0475)
415: - LaCie minimus USB 3.0 (0x059f:0x104a)
416: - Seagate FreeAgent GoFlex Desk USB 3.0 (0x0bc2:0x50a5)
417: - Maxtor BlackArmor Portable (0x0d49:0x7550)
418: - WD My Passport Essential SE USB 3.0 (0x1058:0x0742)
419: - Initio (0x13fd:0x1e40)
420: - Verbatim External Hard Drive 2TB (0x18a5:0x022a)
421: - Hitachi Touro Desk (0x4971:0x1011)
422:
423: [CF] smartd: Add smartd.conf directive '-e' to set ATA settings on
424: startup: aam, apm, lookahead, security-freeze, standby, wcache.
425:
426: [CF] drivedb.h updates:
427: - SandForce Driven SSDs: Corsair Force GT
428: - Indilinx Barefoot based SSDs: Corsair Nova
429: - SAMSUNG SpinPoint M8
430: - Seagate SV35.5
431:
432: [CF] smartctl: Change short option for '--set' from '-e' to '-s'.
433: Keep backward compatibility with short option for '--smart'.
434:
435: [CF] smartctl: Print description of APM level.
436:
437: [CF] smartctl: Add option '-e standby,[N|off|now]' to set standby timer
438: or standby mode.
439:
440: [CF] smartctl: Add options '-g security' and '-e security-freeze' to
441: get/freeze ATA security settings.
442:
443: [CF] smartctl: Add options '-g/e lookahead' and '-g/e wcache' to get/set
444: read look-ahead and write cache feature.
445:
446: [CF] smartctl: Add options '-g aam' and '-e aam,[N|off]' to get/set
447: ATA Automatic Acoustic Management feature. Add '-g all'.
448:
449: [CF] os_win32.cpp: Prevent warnings from gcc option -Wformat-security.
450:
451: [CF] smartctl: Add options '-g, --get apm' and '-e, --set apm,[N|off]'
452: to get/set ATA Advanced Power Management feature.
453: Original patch was provided by Marcus Sorensen.
454:
455: [AS] os_freebsd.cpp - do not skip ATA devices from cam list. Starting from
456: FreeBSD 9.0 such devices are exported ONLY as camdev`s, so DEVICESCAN
457: was broken. Its possible to get duplicates now on some old systems.
458:
459: [CF] drivedb.h updates:
460: - SandForce Driven SSDs: Add OCZ Solid 3, OCZ Deneva 2 C/R
461: - Seagate Momentus 5400.7
462:
463: [CF] Happy New Year! Update copyright year in version info.
464:
465: [CF] drivedb.h updates:
466: - SandForce Driven SSDs: Add Patriot Pyro
467: - Intel 320 Series SSDs: Fix 40GB
468: - Seagate Barracuda XT: Add 4TB
469:
470: [CF] drivedb.h updates:
471: - SandForce Driven SSDs: Add Corsair Force 3
472: - Hitachi Travelstar 5K320: Add SA00 and SA02 models
473: - Western Digital Caviar SE SATA: Add 300GB
474:
475: [CF] Cygwin smartd: Remove SIGQUIT workaround, no longer needed with
476: current Cygwin tty emulation.
477:
478: [CF] smartd: Disable auto standby also after start of scheduled
479: self-test.
480:
481: [CF] smartd: Add smartd.conf DEFAULT directive. Allows to set default
482: settings for multiple devices.
483:
484: [CF] smartd: Re-enable auto standby if smartd.conf is re-read.
485:
486: [AS] drivedb.h update: Seagate Barracuda (SATA 3Gb/s, 4K Sectors)
487:
488: [AS] drivedb.h update: Seagate Constellation ES.2 (SATA 6Gb/s)
489:
490: [CF] drivedb.h updates:
491: - Sandforce Driven SSDs: Add OCZ Vertex 3 Max IOPS (ticket #209)
492: - Seagate ST1.2 CompactFlash (found in ticket #125)
493:
494: [CF] Fix GPL version reported by '-V' option.
495: Now reports GPLv2+ which is consistent with file headers.
496: Patch was provided by Stanislav Brabec.
497:
498: [CF] drivedb.h updates:
499: - Sandforce Driven SSDs: Add OCZ Deneva 2 Async variant, 60GB, 480GB
500: - Indilinx Martini based SSDs: OCZ VERTEX-PLUS only
501:
502: [CF] smartd: Add '-l offlinests,ns' and '-l selfteststs,ns' directives.
503: dev_interface: Add smart_interface::disable_system_auto_standby().
504: os_win32.cpp: Implement disable_system_auto_standby().
505:
506: [CF] dev_interface: Let smart_interface::set_err() return false.
507:
508: [CF] drivedb.h updates:
509: - SAMSUNG SpinPoint M8U (USB)
510: - Toshiba 3.5" HDD MKx002TSKB: Fix typo
511:
512: [CF] smartctl: Print average temperature from SCT status only if
513: value is reasonable. Field is not part of ATA-8.
514:
515: [CF] smartd: Report ignored '-r' and '-R' directives.
516:
517: [CF] smartctl: Use 16-bit value (ATA-8) for extended self-test polling
518: time if 8-bit value is 0xff (ticket #207).
519:
520: [CF] drivedb.h updates:
521: - SandForce Driven SSDs: Add OCZ-REVODRIVE3, OCZ Z-DRIVE R4
522: - Hitachi Travelstar Z7K320
523: - Toshiba 2.5" HDD MK..56GSY
524: - Toshiba 2.5" HDD MKx002TSKB
525: - Seagate U9
526: - Seagate U*: sort entries, unify names, remove duplicate
527: - Seagate Constellation ES (SATA 6Gb/s)
528: - Seagate DB35
529: - Seagate DB35.2
530: - Western Digital Scorpio Black: Add 500GB
531: - Western Digital Scorpio Black (Adv. Format)
532:
533: [CF] drivedb.h USB updates:
534: - Samsung S2 (0x04e8:0x1f05)
535: - Toshiba Stor.E (0x0939:0x0b16) (ticket #206)
536: - Seagate FreeAgent (0x0bc2:0x5040)
537: - Initio/Thermaltake BlacX (0x13fd:0x0840)
538:
539: [DG] [SCSI] smartd: skip non-storage devices (e.g. SES devices)
540:
541: [AS] drivedb.h updates: Added Seagate SV35 Series
542:
543: [CF] smartctl: Don't start ATA self-test if another test is already
544: running (ticket #40). Add option '-t force' to allow override.
545:
546: [CF] atacmds.h: Remove bogus ataSmart*Test*() prototypes.
547:
548: [CF] Define __attribute_format_printf() for functions with printf() style
549: arguments. Allow MinGW build with __USE_MINGW_ANSI_STDIO enabled.
550:
551: [CF] Makefile.am: Replace sed compound command in MAN_FILTER.
552: This fixes build on Solaris (ticket #203).
553:
554: [AS] os_freebsd.cpp: Dereference symlinks before guess of device type
555: (problem reported by email).
556:
557: [CF] drivedb.h USB updates:
558: - LG Mini HXD5 (0x043e:0x70f1)
559: - Freecom/Intel (0x07ab:0xfc8e)
560: - Dura Micro (0x0c0b:0xb001) (Debian bug 643928)
561: - Initio 6Y120L0 (0x13fd:0x1150): unsupported
562:
563: [CF] drivedb.h USB update:
564: - Seagate FreeAgent GoFlex Desk USB 3.0 (0x0bc2:0x50a1):
565: Revert to -d sat,12 (ticket #151).
566:
567: [AS] os_freebsd.cpp - fixed crash on FreeBSD9-RC1 caused by r225950
568:
569: [AS] smartctl.8 - added information about -d areca on FreeBSD
570:
571: [AS] os_freebsd.cpp: backport quirks for the LSI controllers with SATA
572: disks to the FreeBSD. Tested with DELL Perc/6i controller.
573:
574: [AS] os_freebsd.cpp: disable SAT autodetection on megaraid controllers
575:
576: [AS] drivedb.h update:
577: - Hitachi Ultrastar 7K2000
578:
579: [CF] drivedb.h update:
580: - Seagate Momentus XT: Add bug warning for firmware SD24 and SD25
581:
582: [CF] Don't include pkg-config macros in aclocal.m4, copy to m4/pkg.m4
583: instead. Allow builds from SVN without pkg-config installed
584: but prevent 'make dist' when pkg-config support is missing.
585:
586: [CF] Move automake --foreign option from autogen.sh to configure.in.
587: This fixes autoreconf support.
588:
589: [CF] Replace COPYING file with current (2010-03-24) version from
590: http://www.gnu.org/licenses/gpl-2.0.txt
591:
592: smartmontools 5.42 2011-10-20
593:
594: [CF] Windows installer: Add install dir to PATH in CMD shortcut.
595:
596: [CF] drivedb.h updates:
597: - SAMSUNG SpinPoint MP5
598: - Seagate Barracuda 7200.11: Change warning text, Seagate
599: apparently released fixed firmware without changing version
600: number (Debian bug 632758)
601: - Western Digital RE4 GP
602: - Western Digital VelociRaptor: Add 150GB, 300GB LHX variants
603: - Western Digital Scorpio Blue Serial ATA (Adv. Format):
604: Add 1TB JPVT variant
605:
606: [CF] drivedb.h USB update:
607: - WD Elements SE USB 3.0 (0x1058:0x1042)
608:
609: [CF] Windows installer: Rework to support UAC.
610: Replace *-run.bat files by runcmd?.exe wrappers.
611: Run drive menu entries elevated (ticket #173).
612:
613: [CF] smartctl.8.in: Add example script which prints all status bits
614: (ticket #191).
615:
616: [CF] Cygwin smartd: Remove '--service' option, update man page.
617:
618: [CF] smartd: Require absolute path name also for '-p' option.
619: Allow relative path names for '-A', '-s', '-p' in Windows
620: version only.
621:
622: [CF] smartd: Log model family from drive database if known.
623:
624: [CF] drivedb.h update:
625: - SMART Xcel-10 2.5 SATA SSD: Shorten names,
626: document supported default attributes.
627:
628: [CF] smartctl -P showall: Report error if attribute name is too long.
629:
630: [AS] freebsd: use system ciss header if available, it is added
631: to the base system by recent commit.
632:
633: [CF] smartd.conf.5.in: Update Windows 'msgbox' info.
634: Add missing IF/ENDIF for Solaris and Windows.
635:
636: [CF] man pages: Remove reference to T13 web site. It does no
637: longer provide links to the ATA documents.
638:
639: [CF] smartctl: Replace '-t scttempint,N[,p]' option
640: by '-l scttempint,N[,p]'.
641:
642: [CF] drivedb.h USB update:
643: - Oxford (0x0928:0x0000): unsupported, see
644: https://bugs.freedesktop.org/show_bug.cgi?id=24951
645:
646: [CF] Minor cleanup to prevent warnings from new gcc 4.6 options
647: -Wunused-but-set-parameter/variable.
648:
649: [CF] Windows smartd: Fix format string for 64-bit version.
650:
651: [CF] Remove EXPERIMENTAL notes for features already present in 5.40.
652:
653: [CF] smartctl: Add new log addresses from ACS-3 revision 1.
654:
655: [CF] smartctl: Print ATA ACS-x versions properly (ticket #183).
656:
657: [CF] smartctl: Add option '-l devstat[,PAGE]',
658: print ATA Device Statistics log pages (ticket #106).
659:
660: Thanks to David Boreham for providing access to a machine for testing.
661:
662: [AS] man pages: trivial man page syntax fixes (ticket #199)
663:
664: [CF] drivedb.h update:
665: - SMART Xcel-10 2.5 SATA SSD: Fix syntax error (ticket #200)
666:
667: [AS] drivedb.h update:
668: - SMART Xcel-10 2.5 SATA SSD
669:
670: [DG] [SCSI] document 'ssd' list option in man page and smartctl usage.
671:
672: [CF] Windows: Fix device type detection for Intel ICHxR RAID Volumes.
673:
674: [CF] smartd: Resend warning emails if problem reappears (ticket #167).
675:
676: [CF] smartd: Add separate directives '-l offlinests' and '-l selfteststs'
677: to enable tracking of status changes. Disable '-l offlinests' by
678: default to avoid misleading messages (see Debian bug 636078).
679:
680: [CF] drivedb.h updates:
681: - Crucial/Micron RealSSD C300/C400: Add m4 series (ticket #192)
682: - SandForce Driven SSDs: Add OCZ-AGILITY3
683: - Indilinx Barefoot based SSDs: Add RENICE Z2
684: - Intel 710 Series SSDs
685:
686: [CF] Windows smartd: Fix quoting of service command line.
687:
688: [CF] Cygwin smartd: Remove FreeConsole() after fork().
689: No longer needed for recent versions of Cygwin DLL.
690:
691: [CF] smartd: Add some sleep() time after machine standby mode.
692: Some drivers (Intel ICHxR Windows driver) report failures if
693: pass-through is accessed immediately after wake up.
694:
695: [AS] -d hpt on linux/freebsd - increased max channel number to 16,
696: fixed documentation.
697: (see http://permalink.gmane.org/gmane.linux.utilities.smartmontools/7846)
698:
699: [AS] os_linux.cpp - disabling SMART WRITE LOG SECTOR command on
700: megaraid interface for SATA disks.
701:
702: [AS] os_freebsd.cpp: -l scterc was broken on FreeBSD, fixed for atacam and
703: ata drivers (bug #198).
704:
705: [CF] drivedb.h updates:
706: - Crucial/Micron RealSSD C300/C400: Add C400
707: - SandForce Driven SSDs: Add Kingston HyperX,
708: OCZ-REVODRIVE, OCZ Deneva 2
709: - Intel X18-M/X25-M/X25-V G2 SSDs: Add 120GB
710: - Hitachi Travelstar 7K200: Match capital letters also
711: - Hitachi Ultrastar 7K3000
712: - Seagate Barracuda Green: Add ST2000DL001-* (ticket #195)
713: - WD My Passport Essential SE: Add WD10TMVW-*
714:
715: [CF] drivedb.h USB updates:
716: - Seagate FreeAgent GoFlex USB 3.0 (0x0bc2:0x5071) (ticket #195)
717: - Seagate FreeAgent GoFlex Desk USB 3.0 (0x0bc2:0x50a1):
718: Enable -d sat,16 (ticket #151).
719: - Oyen Digital MiniPro USB 3.0 (0x0dc4:0x020a) (ticket #193)
720: - WD My Passport Essential SE USB 3.0 (0x1058:0x0740)
721:
722: [CF] Windows: Add MSVC10 support, remove MSVC8 project files.
723:
724: [DG] [SCSI] smartctl output Solid State Media (SSD) percentage used
725: endurance indicator. Add '-l ssd', useful for SATA SSDs?
726:
727: [CF] atacmds.cpp: Rework search for temperature min/max values
728: in attributes 190/194. This fixes temperature tracking
729: for recent WDC drives.
730:
731: [CF] drivedb.h USB updates:
732: - LaCie rikiki USB 3.0 (0x059f:0x1057)
733: - Freecom Mobile Drive XXS (0x07ab:0xfc88)
734: - WD Elements SE (0x1058:0x1023)
735:
736: [CF] drivedb.h updates:
737: - Indilinx Barefoot based SSDs: Add G.Skill Falcon
738: - JMicron based SSDs (JMF61x): Add Kingston SSDNow V100 Series
739: - Transcend CompactFlash Cards: Add 8, 16GB
740: - Toshiba 1.8" HDD MD..29GSG
741: - SAMSUNG SpinPoint M7U
742: - Western Digital Caviar Green (Adv. Format): Add SATA 6Gb/s variants
743: - Western Digital My Passport USB: Shorten names
744:
745: [DG] [SCSI] smartd initial log entry for each drive now shows INQUIRY
746: strings and optionally the LU (logical unit) id and capacity
747:
748: [AS] os_freebsd.cpp: fixed return type in autodetect_smart_device.
749:
750: [CF] drivedb.h USB updates:
751: - WD My Book Essential (0x1058:0x0910, Debian bug 633724)
752: - Atech (0x11b0:0x6298)
753:
754: [CF] drivedb.h update:
755: - Seagate Barracuda ES.2: Add Dell firmware versions (ticket #189)
756:
757: [CF] drivedb.h updates:
758: - Seagate Maxtor DiamondMax 21: Add STM380215AS
759: - Seagate Barracuda 7200.12: Add ST3250312AS, ST31000524AS
760: - Toshiba 2.5" HDD MK..50GACY
761: - Toshiba 2.5" HDD MK..76GSX
762:
763: [AS] smartd.8 - removed configuration file information from this manual,
764: added reference to smartd.conf.5.
765:
766: [AS] smartd.conf.5 - added more platform-specific sections, corrected "areca"
767: device information, corrected sample configuration.
768:
769: [AS] os_freebsd.cpp: detecting access to /dev/mfidX devices to show help (#97)
770:
771: [CF] Update configure options in INSTALL file, remove outdated info.
772:
773: [CF] int64.h: Remove outdated uint64_to_double() workaround for MSVC6.
774:
775: [CF] os_win32/update-smart-drivedb.nsi: Add support for /S(ilent) option.
776:
777: [CF] configure.in: Don't search for initddir and systemdsystemunitdir
778: when cross-compiling.
779:
780: [CF] Makefile.am: Use same syntax also for ENABLE_* man page sections.
781:
782: [CF] Add experimental support for platform-specific man pages.
783:
784: [CF] Windows: Move '-I os_win32' from configure.in to Makefile.am.
785:
786: [CF] configure.in: Fix check for __attribute__((packed)).
787:
788: [CF] drivedb.h USB update:
789: - Verbatim Portable Hard Drive (0x18a5:0x0214)
790:
791: [CF] drivedb.h update:
792: - SandForce Driven SSDs: Add OWC Mercury Extreme Pro RE (ticket #168)
793:
794: [CF] os_linux.cpp: Let MegaRAID autodetect_open() fail for SATA devices.
795: MegaRAID SAT layer has serious bugs as reported by AS.
796:
797: [AS] os_freebsd.cpp: Implement 48bit support for the new "atacam"
798: interface. Tested on FreeBSD 8.2 and works fine.
799:
800: [CF] os_win32.cpp: Fix USB ID detection if two devices with the same
801: name exist (ticket #178).
802:
803: [AS] os_freebsd.cpp: including ciss headers to the base, we can not rely
804: on the header sources in the build time. Also this file was changed
805: last time > 2 yrs. ago and it is unlikely that it will be changed in
806: the feature. This will fix FreeBSD PR 150235.
807:
808: [AS] drivedb.h update: Added Samsung Story Station 3.0 USB.
809:
810: [AS] os_linux.cpp: Areca code converted to the new interface.
811: Patch is based on os_freebsd.cpp patch and is not tested yet.
812:
813: [AS] os_freebsd.cpp: Areca code converted to the new interface.
814:
815: [AS] os_freebsd.cpp: Added support for the Areca RAID controllers.
816: Support is basesd on Linux code, but using IOCTL on areca control
817: device instead of SCSI commands to talk with the drives. Hardware
818: access was provided by Andrej Binder.
819:
820: [CF] Don't use isprint() for ASCII character check as it may be affected
821: by setlocale().
822:
823: [AS] os_freebsd.cpp: Remove all referenced to the FreeBSD 5.0.
824: It is unsupported for a very long time and probably will not compile
825: and work anyway. Also this will fix bug #154.
826:
827: smartmontools 5.41 2011-06-09
828:
829: [MS] drivedb.h: revert attribute 190 to default for Samsung SSD controllers,
830: some 470 series SSDs seem to have some temperature information at
831: this location.
832:
833: [MS] drivedb.h update:
834: add attribute details for Samsung controllers, centralize entries
835:
836: [MS] drivedb.h update:
837: add attribute details for JMicron JMF61x controllers
838:
839: [CF] drivedb.h update:
840: - SandForce Driven SSDs: Add OCZ DENEVA
841:
842: [CF] os_win32.cpp: Ignore vendor ID "ATA" if returned by
843: IOCTL_STORAGE_QUERY_PROPERTY.
844:
845: [CF] Add ATA NCQ commands to error register decoding.
846:
847: [CF] Re-enable '--with-initscriptdir=auto' as default.
848: Change search for initddir and systemdsystemunitdir such that
849: default ./configure does never overwrite system files.
850:
851: [MS] drivedb.h update:
852: disentangle Transcend SSD versions
853:
854: [MS] drivedb.h update:
855: add attribute details for Crucial C300
856:
857: [MS] smartd.initd.in:
858: fix for debian, cleanup. Based on patch of CF.
859:
860: [AS] --with-initscriptdir default changed to "no" from "auto" to avoid
861: filesystem pollution.
862:
863: [MS] drivedb.h cleanup:
864: harmonize family names, add AF information into name
865:
866: [MS] drivedb.h update:
867: - OCZ Vertex 3
868: - Seagate Barracuda Green 1TB variant
869:
870: [CF] Windows: Avoid '%n' printf format specifier because it is always
871: disabled in recent versions of msvcrt.dll. This fixes truncation
872: of smartd warning email (ticket #174).
873:
874: [MS] smartd.initd.in:
875: cleanup, provide targets "reload" and "report" for all platforms
876:
877: [CF] drivedb.h update:
878: - JMicron based SSD (JMicron JMF602?): rename from
879: Kingston SSDNow V Series, move Transcend IDE and SATA
880: entries to here.
881:
882: [CF] Support ':BYTEORDER' for all attribute print formats.
883:
884: [CF] drivedb.h update:
885: - Kingston SSDNow V Series SSDs (ticket #171)
886:
887: [CF] Increase size of drive database option parse buffer
888: to allow long '-v N,FORMAT:BYTEORDER,NAME' options.
889:
890: [MS] drivedb.h update:
891: - Western Digital Scorpio Blue Advanced Format variants
892:
893: [MS] drivedb.h update:
894: correct typo for Cowon iAudio X5
895:
896: [MS] drivedb.h USB updates:
897: - Maxtor OneTouch 200GB (unsupported)
898: - LaCie Little Disk
899:
900: [AS] FreeBSD: Added native rc.conf style script to the package.
901: Modifications to the configure script to use correct template and
902: path.
903:
904: [AS] freebsd_os.cpp:
905: Fix memory leak in the ata detection code (added free())
906: Using bzero in cam code to clear structure (fixing varnish varning)
907:
908: [MS] drivedb.h update:
909: Kingston SSDNow S100 Series
910:
911: [MS] drivedb.h USB update:
912: - Samsung S1 Portable
913: - LaCie rikiki USB 3.0
914: - Seagate FreeAgent GoFlex USB 3.0
915: - Cowon iAudio X5
916: - Oxford OXU921DS chip (unsupported)
917:
918: [CF] Windows: Add debug output of SCSI sense data.
919:
920: [CF] Add 'smartd.service' file for systemd.
921: Add configure option '--with-systemdsystemunitdir'.
922: Disable initd script if systemd is used.
923:
924: [MS] drivedb.h update:
925: - Western Digital AV-25 family
926:
927: [MS] drivedb.h update:
928: JMicron based SSDs: Add
929: Kingston SSDNow V, Kingston SSDNow V+100, TOSHIBA THNS128GG4BBAA,
930: APPLE SSD TS*, ADATA S596 Turbo
931:
932: [CF] drivedb.h update:
933: - Intel 510 Series SSDs (ticket #170)
934:
935: [CF] smartctl: Don't issue SMART DISABLE command to 3ware controllers
936: when the port number was not specified (ticket #165).
937:
938: [CF] Use get_errmsg() from device instead of errno or syserror() for
939: printing error messages.
940:
941: [MS] drivedb.h updates:
942: - G.Skill FALCON II SSD (Indilinx)
943: - HP 250GB SATA disk VB0250EAVER
944: - SAMSUNG SpinPoint M5 HM160HC
945: - SAMSUNG SpinPoint MT2 HM100UI
946: - SAMSUNG HM100UX
947: - Hitachi Deskstar 5K3000 Series
948: - Seagate Barracuda Green (Adv. Format)
949: - Seagate Barracuda XT 3TB variant
950: - Western Digital RE4 Serial ATA family
951: - Western Digital Caviar Green WD20EACS
952: - Western Digital Caviar Black family, SATA 3.0 variants
953: - QUANTUM FIREBALLlct20 10
954: - QUANTUM FIREBALLP AS60.0
955:
956: [CF] drivedb.h update:
957: - SandForce Driven SSDs: Add more OCZ SF-1200 and SF-1500 based drives
958:
959: Thanks to Sudhir Verman from OCZ Technology for providing this info.
960:
961: [CF] drivedb.h USB updates:
962: - Seagate Expansion External (0x0bc2:0x3300) (Debian bug 621411)
963: - ASMedia USB 3.0 (0x174c:0x55aa) (unsupported)
964:
965: [CF] smartctl.8.in: Clarify '-t vendor,N' (ticket #169).
966: Update Intel info (ticket #168).
967:
968: [CF] drivedb.h update:
969: - Intel 320 Series SSDs (ticket #168)
970:
971: [CF] smartctl: Always print sector size in '-i' output (ticket #166).
972:
973: [CF] os_linux.cpp: Shorten version string.
974:
975: [CF] smartctl: Add option '-f brief' to select new attribute output
976: format. This format includes additional attribute flags
977: (ticket #109) and fits in 80 columns (ticket #158).
978: This format is now the default for '-x'.
979:
980: [CF] smartd: Log changes of offline data collection status if
981: '-l selftest' is specified.
982:
983: [CF] drivedb.h updates:
984: - SandForce Driven SSDs: Add ADATA S599 64GB,
985: OWC Mercury Extreme Pro
986: - Kingston branded X25-V SSDs (ticket #156)
987: - Transcend SATA Solid State Drive: Truncate attribute name
988:
989: [CF] drivedb.h USB updates:
990: - LaCie (0x059f:0x1029) (ticket #153)
991: - WD My Book Office Edition (0x1058:0x1101)
992: - JMicron USB 3.0 (0x152d:0x0539)
993:
994: [CF] drivedb.h USB update:
995: - Verbatim Pocket Hard Drive (0x18a5:0x0227) (ticket #159)
996:
997: [CF] drivedb.h update:
998: - SAMSUNG SpinPoint N3U-3 (USB, 4KiB LLS) (ticket #159)
999:
1000: [CF] Add support for ATA Long Logical Sectors (LLS) (ticket #159).
1001:
1002: [DG] [SCSI] smartctl: (re-)use capacity formatting in utility.cpp
1003:
1004: [CF] configure.in: Remove '-Wno-format' for MinGW.
1005: Recent MinGW versions support MSVCRT printf format strings.
1006:
1007: [CF] Print ATA disk capacity with SI prefix.
1008: Add/move capacity formatting to utility.cpp
1009:
1010: [CF] Add error messages if ATA pass-through does not return required
1011: ATA output registers (for SMART RETURN STATUS, GET POWER MODE).
1012: This prevents misleading 'SMART Status command failed' messages
1013: (see ticket #155).
1014:
1015: [CF] Fix WWN support check for older ATA-7 disks.
1016:
1017: [DG] [SCSI] smartctl: add 'Logical Unit id' from the Device
1018: Identification VPD page (0x83)
1019:
1020: [DG] [SCSI] smartctl: add 'User Capacity' (disk size) in human
1021: readable form
1022:
1023: [CF] smartctl, smartd: Print World Wide Name (WWN) of ATA device.
1024:
1025: [CF] smartctl: Print more specific error message if IDENTIFY DEVICE
1026: failed (ticket #61). Add check for empty IDENTIFY data.
1027:
1028: [CF] Windows installer: Add help message box.
1029:
1030: [CF] Windows installer: Request admin rights, select 'All Users'
1031: section. This fixes shortcut removal under Vista and later.
1032: Add '/SO' option to select components for unattended install.
1033: Patch was provided by József Fejes.
1034:
1035: [CF] Windows: Add update-smart-drivedb.nsi NSIS script to build
1036: drivedb.h update tool.
1037:
1038: [CF] Windows: Move search for NSIS compiler from Makefile.am to
1039: configure.in.
1040:
1041: [CF] update-smart-drivedb.in: Move DRIVEDB_BRANCH name creation
1042: from script to configure.in.
1043:
1044: [CF] os_linux.cpp: Replace printf() by pout(). Disable unused
1045: function dumpdata().
1046:
1047: [CF] Windows: Include CSMI (for Intel RAID) in default DEVICESCAN.
1048:
1049: [CF] configure.in: Remove info messages about old defaults.
1050:
1051: [CF] drivedb.h: Set unneeded USB bcdDevice patterns to empty.
1052:
1053: [CF] Rework USB ID drivedb search. Stop search at first matching
1054: entry with empty bcd_device pattern.
1055:
1056: [CF] Move handling of '-F swapid' from formatting to identity read
1057: function. Remove unneeded 'fix_swapped_id' parameters.
1058:
1059: [CF] smartd: Log warning from drive database if present.
1060: smartctl: Do not search drive database twice.
1061:
1062: [MS] drivedb.h USB updates:
1063: - Samsung S2 Portable variant (0x04e8:0x1f08)
1064: - Lacie rikiki (0x059f:0x102a)
1065: - Toshiba Stor.E Steel series (0x0930:0x0b11)
1066: - Super Top generic enclosure (0x14cd:0x6116)
1067:
1068: [CF] Let constructor of regular_expression throw on error by default.
1069:
1070: [CF] smartd: Preserve last selective self-test span in '.state' file
1071: and use it if the selective self-test log was cleared (ticket #88).
1072:
1073: [CF] smartctl --scan-open: Make output compatible with smartd.conf
1074: (ticket #108). Fix possible crash if autodetect_open() returns
1075: new object.
1076:
1077: [CF] do_release: Re-add signing of tarball.
1078:
1079: [CF] os_linux.cpp: Change '-d sat' to '-d sat,12' for USB only if
1080: kernel is older than 2.6.29. Add kernel release to version info.
1081:
1082: [CF] smartd: Add '-l scterc,READTIME,WRITETIME' directive (ticket #150).
1083:
1084: [CF] smartctl: Fix exit status of '-l xerror' and '-l xselftest'
1085: (ticket #144).
1086:
1087: [CF] smartd: Use '-M daily' as default if state persistence is enabled.
1088: This avoids that emails are suppressed forever (ticket #35).
1089:
1090: [CF] smartd: Log identify information of each ATA device.
1091:
1092: [CF] smartd: Disable '-C' and '-U' monitoring if raw values are
1093: very large (ticket #148).
1094:
1095: [CF] smartd: Write reserved attribute byte to '.state' file
1096: (ticket #118).
1097:
1098: [MS] drivedb.h USB updates:
1099: - Seagate FreeAgent Go Flex Desk USB 3.0
1100: - Toshiba Canvio 500GB
1101:
1102: [MS] drivedb.h USB updates:
1103: - Freecom HD 500GB (0x07ab:0xfcda)
1104: - Generic JMicron adapter (0x152d:0x2337)
1105: - RaidSonic ICY BOX IB-110StU3-B (0x1759:0x500[02])
1106: - Connectland BE-USB2-35BP-LCM (0x040d:0x6204)
1107: - Freecom Classic HD 120GB (0x07ab:0xfccd)
1108: - OCZ THROTTLE OCZESATATHR8G (0x152d:0x0602)
1109: - Vantec NST-400MX-SR (0x1a4a:0x1670)
1110: - Intenso Memory Station 2.5" (0x13fd:0x1840)
1111:
1112: [CF] Don't report failed self-tests outdated by a newer successful
1113: extended self-test as errors (ticket #147).
1114: This affects smartctl exit status and smartd syslog output and
1115: warning email. Only implemented for ATA.
1116:
1117: [CF] os_linux.cpp: Don't use buffer of size PATH_MAX for the result
1118: of realpath(). This also fixes compilation on Debian Lenny.
1119:
1120: [CF] smartd man pages: Add some missing [ATA only].
1121:
1122: [CF] os_linux.cpp: Dereference symlinks before guess of device type
1123: (ticket #146). Minor rework of autodetect_smart_device().
1124:
1125: [CF] smartctl -l scterc: Don't get ERC if only set is requested.
1126: This prevent misleading error messages if ATA output registers
1127: are not supported.
1128:
1129: [CF] Windows: Prevent warnings from gcc 4.5.1.
1130:
1131: [CF] os_netbsd.cpp, os_openbsd.cpp: Add missing <errno.h>
1132:
1133: [CF] os_freebsd.cpp: Add missing <errno.h>
1134:
1135: [CF] dev_legacy.cpp: Add missing <errno.h>
1136:
1137: [CF] Linux megaraid: Fix pass-through of non-data ATA commands
1138: (ticket #149).
1139: Only reject commands which require ATA output registers.
1140:
1141: [CF] configure.in: Remove '-fno-strict-aliasing' from CXXFLAGS.
1142: This reverts r2992 (see ticket #23).
1143:
1144: [CF] Linux megaraid: Avoid strict-aliasing warnings.
1145: Patch was provided by Stanislav Brabec (2009-06-03).
1146:
1147: [MS] Make functions without prototypes static.
1148:
1149: [MS] Remove unnecessary includes, move inclusion of errno.h from scsicmds.h
1150: to the appropriate *.cpp files. Add cciss.h to cciss.cpp.
1151:
1152: [MS] os_linux.cpp: rename variables to please "-Wshadow"
1153: utility.cpp: remove unused variable "start"
1154: os_win32/syslogevt.c: plug resource leak
1155:
1156: [CF] Rename variables to prevent warnings if '-Wshadow' is set.
1157: Remove unnecessary includes. Fix some comments.
1158:
1159: [CF] drivedb.h updates:
1160: - Intel X18-M/X25-M/X25-V G2 SSDs: Add firmware bug warning
1161: - Samsung SpinPoint M6
1162: - Samsung SpinPoint M7E (AFT)
1163: - Samsung PM800 SSDs
1164: - Samsung PM810 (470 series) SSDs
1165:
1166: [CF] Windows: Add experimental CSMI support for disks behind Intel Matrix
1167: RAID driver. Accessed through new device names '/dev/csmi[0-9],N'.
1168: Experimental DEVICESCAN can be enabled by '-d csmi'.
1169:
1170: [MS] - ataprint.cpp: adjust print format for insanely large
1171: offline data collection times (e.g. WD drives).
1172: - getopt: change config.h #include format from angle brackets to quotes
1173:
1174: [MS] drivedb.h update:
1175: - Fujitsu MJA2 BH series
1176: - Toshiba MK..59GSXP series (Adv. Format)
1177: - Toshiba MK..59GSM series (Adv. Format)
1178: - Western Digital Caviar Blue SATA 3.0 variants
1179: - Seagate Barracuda XT
1180:
1181: [CF] smartctl: Print help message if no option is specified (ticket #39).
1182: Don't issue any other ATA command if only '-n POWERMODE' is specified.
1183:
1184: [CF] smartd: Output multiple lines via separate syslog(3) calls
1185: (ticket #135).
1186:
1187: [CF] smartctl: Add new ATA minor revisions and log addresses from ACS-2
1188: revision 4a. Replace runtime asserts by compile time asserts.
1189:
1190: [CF] smartd: Remove "default: /var/log/messages" hint from warning mail.
1191: This obsoletes Debian patch 60_remove-redhatism.diff.
1192:
1193: [CF] Windows: Include USB devices in DEVICESCAN (ticket #116).
1194:
1195: [CF] Windows: Use direct WMI access to detect USB IDs (ticket #115).
1196: This replaces 'wmic' runs and speeds up USB detection.
1197:
1198: [CF] configure.in: Rework platform-specific settings.
1199:
1200: [CF] configure.in: Remove some no longer used settings:
1201: -lselinux (duplicate), NEED_SOLARIS_ATA_CODE, OS_FREEBSD.
1202:
1203: [CF] Makefile.am: Remove SUBDIRS. Recursive targets are no longer used.
1204:
1205: [CF] Use log directory to check for old error and self-test log
1206: support (ticket #89).
1207:
1208: [CF] drivedb.h USB update:
1209: - WD My Book Essential 3TB USB 3.0
1210:
1211: [CF] Fix usb header includes for DragonFly BSD (ticket #141).
1212:
1213: [CF] smartctl: Print physical and logical sector sizes (ticket #62).
1214:
1215: [CF] drivedb.h updates:
1216: - Fujitsu MHT: Add AC variant
1217: - Fujitsu MHW2 AC
1218: - Samsung SpinPoint T166: Needs '-v 197,increasing'
1219: - Seagate Barracuda 7200.11: Add firmware SD81 as buggy
1220: - WD Scorpio Blue EIDE: Add 320GB
1221:
1222: [CF] drivedb.h USB updates:
1223: - Samsung S2 Portable (ticket #136)
1224: - Move Verbatim 0x152d:0x2351 to JMicron section
1225:
1226: [AS] drivedb.h updates:
1227: - Verbatim Portable Hard Drive eSATA & USB 2.0 Combo 500GB
1228:
1229: [CF] Happy New Year! Update copyright year in version info.
1230:
1231: [CF] drivedb.h updates:
1232: - Hitachi Deskstar 7K3000
1233: - Hitachi Travelstar 7K320: Add ...362 variant
1234: - Seagate Maxtor DiamondMax 21: Add STM3250310AS
1235: - Toshiba 2.5" HDD MK..65GSX
1236: - WD Caviar Green (Adv. Format): Add 750GB, 2.5TB, 3TB
1237:
1238: [CF] drivedb.h USB updates:
1239: - Micron USB SSD (unsupported, ticket #133)
1240: - Samsung G2 Portable (ticket #132)
1241: - Samsung Story Station 3.0 (ticket #130)
1242: - Seagate FreeAgent GoFlex (ticket #131)
1243:
1244: [CF] update-smart-drivedb.in: Add workaround for OpenBSD shell bug:
1245: 'set -e; if eval false; ...' aborts script (ticket #128).
1246:
1247: [CF] update-smart-drivedb.in: Add platform specific download tools:
1248: 'fetch' on FreeBSD (ticket #127), 'ftp' on OpenBSD.
1249:
1250: [CF] drivedb.h USB updates:
1251: - JMicron 0x152d:0x2509
1252: - WD My Passport 0730
1253:
1254: [CF] drivedb.h updates:
1255: - Samsung SpinPoint F3 EG: Add 2TB
1256: - SandForce Driven SSDs: Add ADATA S599, SuperTalent TeraDrive CT
1257: - Seagate Constellation (SATA)
1258: - Seagate Constellation ES (SATA)
1259: - WDC My Passport: Add WD5000BMVW
1260:
1261: [CF] drivedb.h update:
1262: - Samsung SpinPoint F4 EG: Add 1.5TB, update firmware bug warning.
1263:
1264: [DG] [SCSI] Fix log page sanity check problem if the DS bit set
1265: in response. Caused '-l background' to fail.
1266:
1267: [CF] drivedb.h updates:
1268: - Samsung SpinPoint F4 EG: Warning about bad blocks
1269:
1270: [CF] update-smart-drivedb.in: Replace ERE by BRE. Script does no
1271: longer require GNU sed (Ticket #126).
1272:
1273: [DG] In '-r ioctl' show vendor specific SCSI commands as such rather
1274: than 'unknown'.
1275:
1276: [CF] Add check for CompactFlash Signature in ATA IDENTIFY data.
1277: This avoids that older CF microdrives are detected as ATAPI
1278: devices (Ticket #125).
1279:
1280: [CF] drivedb.h updates:
1281: - Apple SSDs TS*
1282: - Crucial RealSSD C300 Series
1283: - Kingston SSDNow V Series
1284: - Indilinx Barefoot based SSDs: Add OCZ-ONYX
1285: - SandForce Driven SSDs: Add OCZ VERTEX2-PRO
1286: - Transcend CompactFlash Cards: Add TS4GCF133
1287:
1288: [CF] Windows installer: Add missing quotes in smartctl-run.bat
1289: and smartd-run.bat (Ticket #124).
1290:
1291: [CF] OpenBSD: Fix DEVICESCAN for OpenBSD >= 4.8 (Ticket #123).
1292:
1293: [CF] daemon_win32.cpp: Remove duplicate assignment (Ticket #120).
1294:
1295: [CF] Makefile.am: Do not overwrite existing smartd.conf file
1296: (Ticket #122). If smartd.conf exists and differs from the
1297: default then smartd.conf.sample is installed instead
1298: If smartd.conf.sample exists on uninstall then smartd.conf is
1299: preserved.
1300:
1301: [CF] Linux megaraid: Fix segfault on non-data commands (Ticket #78).
1302: The /dev/megaraid_sas_ioctl_node driver does not allow
1303: sge_count = 1 and sgl[0].iov_len = 0.
1304:
1305: [CF] Remove EXPERIMENTAL notes for features already present
1306: in 5.39.
1307:
1308: [CF] Rework '-d TYPE' documentation on man pages.
1309:
1310: [CF] drivedb.h updates:
1311: - Seagate Maxtor DiamondMax 21: Add 80GB
1312: - Western Digital Caviar Black: Add 1TB/64MB
1313:
1314: [CF] drivedb.h USB updates:
1315: - iRiver iHP-120/140 (Ticket #119)
1316: - ASMedia ASM1051
1317:
1318: [CF] Makefile.am: Handle examplescripts in main Makefile.
1319: Remove 'examplescripts/Makefile.am'.
1320:
1321: [CF] configure.in: New option '--with-exampledir' allows to change
1322: path of 'DOCDIR/examplescripts' directory.
1323: (Debian package uses '/usr/share/doc/smartmontools/examples')
1324:
1325: [CF] Replace global 'con->dont_print/...' variables by 'printing_is_*'.
1326: Remove global 'con'trol pointer. Remove file 'extern.h'.
1327:
1328: [CF] Replace global 'con->reportata/scsiioctl' variables by '*_debugmode'.
1329:
1330: [CF] Replace global 'con->conservative/permissive' variables by
1331: 'failuretest_*'. Move failuretest() function to smartctl.cpp.
1332:
1333: [CF] Remove unused CONTROLLER_* defines.
1334:
1335: [CF] Remove unused controller support from dev_legacy adapter module.
1336:
1337: [CF] Make 'debugmode' variable local to smartd.cpp.
1338:
1339: smartmontools 5.40 2010-10-16
1340:
1341: [CF] examplescripts/Example3: Use stdin to pass message to 'wall'
1342: command (ticket #114).
1343:
1344: [CF] smartd: Fix setting of SMARTD_DEVICE and SMARTD_DEVICETYPE
1345: environment variables (ticket #113).
1346: Regression was introduced by rework of smartd data structures.
1347: SMARTD_DEVICE is now set to the plain device name.
1348: SMARTD_DEVICETYPE is now set to 'auto' if no '-d' directive is
1349: specified. Smartctl now accepts '-d auto' for this purpose.
1350:
1351: [CF] Remove "Lifetime" from Min/Max temperature attribute output
1352: (ticket #111). Interval is device specific.
1353:
1354: [CF] configure.in: Print resource/message compiler info for Windows only.
1355:
1356: [CF] FreeBSD: Rework get_dev_names_cam() to support more than 26 devices.
1357:
1358: [CF] drivedb.h updates:
1359: - Seagate Barracuda 7200.10: Add 360GB
1360: - USB: Iomega MDHD-UE
1361: Patch provided by Rob Marissen.
1362:
1363: [DL] Standby mode not detected properly on FreeBSD (ticket #91).
1364:
1365: [MS] os_linux.cpp: fix "gcc -flto" build error by including stddef.h
1366:
1367: [CF] drivedb.h update:
1368: - Indilinx Barefoot based SSDs: Add OCZ-VERTEX 1199 and -TURBO
1369:
1370: [CF] TODO file: Move open entries to tickets #106, #107, #108, #109, #110.
1371: Remove outdated entries.
1372:
1373: [CF] drivedb.h USB update:
1374: - SunPlus 0x04fc:0x0c05
1375:
1376: [CF] drivedb.h update:
1377: - SandForce Driven SSDs: Add Corsair Force, fix typo
1378:
1379: [CF] Print hex values of unknown self-test type or status.
1380:
1381: [CF] drivedb.h updates:
1382: - SandForce Driven SSDs: Fix regex for Unigen UG99SGC
1383: - Seagate Momentus XT series
1384: - Quantum Bigfoot: Add 12.7GB
1385:
1386: [CF] drivedb.h updates:
1387: - SandForce Driven SSDs: Add 11 attributes of new FW,
1388: add Unigen UG99PGC
1389: - WD AV ATA family: Add 250GB, 320GB
1390: - WD AV SATA family
1391:
1392: [CF] Windows: Build syslogevt.exe with MinGW. Now possible because
1393: binutils provides windmc.
1394:
1395: [CF] Makefile.am: Remove install message about smartd startup.
1396: It might be misleading because it is not correct for all platforms.
1397:
1398: [CF] configure.in: Minor fix of '--enable-drivedb' new defaults
1399: detection.
1400:
1401: [CF] Update links, configure and OS info in INSTALL file.
1402: Replace tabs by spaces.
1403:
1404: [CF] configure.in: Fix '--enable-sample' and '--with-selinux'.
1405: Fix obsolete use of AC_DEFINE().
1406:
1407: [CF] drivedb.h updates:
1408: - IBM Deskstar 60GXP, 40GV & 75GXP: Update link (ticket #99)
1409: - Seagate Barracuda 7200.12: Add ST31000523AS and others
1410: - WD Caviar Black: Add 2TB
1411: - WD VelociRaptor: Add 6 Gb/s models
1412:
1413: [CF] Windows installer: Fix smartctl-run.bat for drive menu (ticket #31).
1414:
1415: [CF] Windows: Create md5/sha1/sha256 checksums of the binaries.
1416: Add checksums.txt file to binary distribution.
1417:
1418: [CF] Windows: Include drivedb.h into binary distribution.
1419:
1420: [CF] drivedb.h updates:
1421: - Intel X18-M/X25-M/X25-V G2: Add X25-V 40GB
1422: - Transcend CompactFlash Cards
1423:
1424: [CF] drivedb.h updates:
1425: - Seagate Momentus 7200 FDE.2: Add ST9160414ASG
1426: - Seagate Pipeline HD 5900.1 and 5900.2
1427: Based on patch provided by Marcin Falkiewicz.
1428:
1429: [CF] Remove unused variable 'reportbug'.
1430:
1431: [CF] Make function PrintOut() local to smartd.cpp, remove it from
1432: smartctl.cpp.
1433:
1434: [CF] Windows: Improve compatibility with MinGW variants.
1435: Add configure check for DDK include files.
1436: Drop support for '-mno-cygwin' from old Cygwin gcc.
1437:
1438: [AS] smartctl.8.in minor update: adding FreeBSD ahci/scsi device hints
1439:
1440: [CF] Fix build if SVN Id keywords are not expanded (ticket #94).
1441:
1442: [CF] Windows: Remove "." from DLL search path to prevent DLL
1443: preloading attacks.
1444:
1445: [CF] drivedb.h USB update:
1446: - JMicron 0x152d:0x0551 (ticket #95)
1447: Add note about port multipliers to smartctl man page.
1448:
1449: [CF] drivedb.h updates:
1450: - SandForce Driven SSDs: Add Unigen drives
1451: - Indilinx Barefoot based SSDs: Add ASAX Leopard Hunt II
1452:
1453: [CF] drivedb.h update:
1454: - Intel X18-M/X25-M G2: Add names of timed workload attributes.
1455: Document attribute clear command '-t vendor,0x40' on smartctl
1456: man page.
1457:
1458: Thanks to Artem Danielov from Intel for providing the
1459: required information and drives for testing.
1460:
1461: [CF] drivedb.h update:
1462: - SandForce Driven SSDs: Add OCZ drives with form factor info.
1463:
1464: [CF] drivedb.h update:
1465: - Intel X25-E, X18-M/X25-M (add X18-M, update attributes)
1466:
1467: [CF] configure.in: '--enable-drivedb' is now the default.
1468:
1469: [CF] drivedb.h update:
1470: - Indilinx Barefoot based SSDs
1471: (combine and update 5 SSD entries using this controller)
1472:
1473: [CF] drivedb.h update:
1474: - SandForce Driven SSDs (Demo Drive, OCZ-Agility2/Vertex2/Vertex-LE)
1475:
1476: Thanks to Jeremy Werner (jwerner@sandforce.com) from SandForce for
1477: providing the required information and a demo drive for testing.
1478:
1479: [CF] drivedb.h update:
1480: - Add 1.5TB drive to SAMSUNG SpinPoint F3 EG series
1481:
1482: [CF] Add print formats '-v ID,msec24hour32' and '-v ID,raw24/raw32'.
1483: Used by SSDs with SandForce controller.
1484:
1485: [CF] Allow SMART threshold entries at positions different from
1486: attribute table. This fixes attribute output for recent
1487: SSDs with SandForce controller.
1488:
1489: [CF] smartctl: Add option '-t vendor,N' to issue ATA
1490: command SMART EXECUTE OFF-LINE IMMEDIATE with
1491: a vendor specific subcommand.
1492:
1493: [CF] drivedb.h update:
1494: - SAMSUNG SpinPoint V80 series (ticket #85)
1495:
1496: [CF] Linux: Support SATA drives on LSI 3ware 9750 controllers.
1497: Patch provided by Victor Payno (ticket #86).
1498: Modified to avoid duplicate code.
1499:
1500: [CF] drivedb.h update:
1501: - SAMSUNG SpinPoint M7 series
1502:
1503: [CF] drivedb.h USB update:
1504: - Buffalo JustStore Portable HD-PVU2
1505:
1506: [CF] drivedb.h USB updates:
1507: - Iomega LDHD-UP (ticket #83)
1508: - WD Elements Desktop 2TB
1509: - Maxtor OneTouch (0x0d49:0x7300)
1510:
1511: [MS] drivedb.h updates:
1512: - Intel X25-M SSD first Generation
1513: - ExcelStor J8160
1514: - OCZ Agility2
1515:
1516: [CF] drivedb.h updates:
1517: - Transcend Solid State Drives (ticket #80)
1518:
1519: [CF] drivedb.h USB update:
1520: - LaCie Rugged Hard Drive
1521:
1522: [CF] smartctl: Add options '--scan, --scan-open'.
1523:
1524: [CF] Windows: Use also VendorId from IOCTL_STORAGE_QUERY_PROPERTY.
1525:
1526: [CF] smartd: Change defaults of '-C' and '-U' directives to 0 (disabled)
1527: if attribute name is changed by '-v 19[78],...' directive.
1528:
1529: [CF] configure.in: Fix include path for MinGW.
1530:
1531: [CF] Move 'posix/reg*' to 'regex/reg*'.
1532: Add configure check for regex.
1533:
1534: [MS] cciss.cpp: avoid redefining be32toh
1535: megaraid.h: replace use of undefined preprocessor macro BITS_PER_LONG
1536: by union construct (thanks to [DL]).
1537: Add assert for sizeof(ptr_t) == 8 (thanks to [CF]).
1538:
1539: [CF] Makefile.am: Add os_qnxnto.* to EXTRA_smart*_SOURCES.
1540:
1541: [MS] drivedb.h update:
1542: - WD My Passport Essential SE 1TB variant (USB interface)
1543:
1544: [CF] Use getopt_long() from getopt/getopt* if necessary.
1545: Add missing cast to os_qnxnto.cpp.
1546: This fixes build on QNX (ticket #1).
1547: Thanks to Stefan (stevestereo) for testing.
1548:
1549: [CF] drivedb.h update:
1550: - WD Caviar Green (Adv. Format) family
1551:
1552: [CF] drivedb.h USB update:
1553: - Verbatim External Hard Drive 47519
1554:
1555: [DL] Fix regression in smartctl option '-t select,M-N' which prevents
1556: that more than one test span can be specified (ticket #75).
1557:
1558: [CF] drivedb.h updates:
1559: - Add raw64 attributes 1, 210-213 to all SSD drives with
1560: 64-bit attribute format.
1561:
1562: [CF] Support smartd '-l xerror' also for disks which use reserved
1563: byte as log index.
1564:
1565: [CF] Fix initialization of values missing in smartd '.state' files.
1566:
1567: [CF] Add smartd directive '-l xerror' to check error count from
1568: the Extended Comprehensive SMART Error Log (ticket #34).
1569:
1570: [CF] Fix max number of cciss devices, 128 devices are supported
1571: again (ticket #49). Regression was introduced during migration
1572: to new interface.
1573:
1574: [CF] Update man pages (include Debian patch
1575: 60_remove-redhatism.diff and Debian Bug 570892).
1576:
1577: [CF] Add SVN revision number to man pages.
1578:
1579: [CF] Windows: Read default drivedb.h and smartd.conf from exe
1580: directory instead of current directory.
1581:
1582: [CF] drivedb.h update:
1583: - SAMSUNG SpinPoint M series
1584:
1585: [CF] Replace runtime check of byte ordering by compile time check.
1586:
1587: [CF] drivedb.h USB updates:
1588: - ALi M5621 (unsupported)
1589: - LaCie with JMicron (ticket #69)
1590: - JMicron (0x2352)
1591: - Enable 48-bit commands for Hitachi drive
1592:
1593: [CF] Read USB ID info from drivedb.h (ticket #44).
1594:
1595: [CF] Create branch RELEASE_5_39_DRIVEDB with last drivedb.h file
1596: compatible with smartmontools 5.39[.1].
1597:
1598: [MS] drivedb.h updates:
1599: - WD Raptor 80GB variant
1600: - correct Regex for some WD AV-GP variants
1601: - Hitachi Ultrastar A7K2000
1602: - Hitachi Travelstar 5K500.B
1603: - Hitachi Deskstar 7K1000.C
1604: - adjust naming of Hitachi Travelstar and Deskstar drives
1605:
1606: [CF] Move 'posix/getopt*' to 'getopt/getopt*'. Can be used for
1607: platforms with regex() but without getopt_long() (QNX, ticket #1).
1608:
1609: [CF] smartd '-l selftest' directive: Print info if error count
1610: decreased. Avoid misleading warning if error count decreased
1611: to zero (ticket #67).
1612:
1613: [CF] smartctl: Rework ataPrintMain(). Issue ATA SMART commands only if
1614: necessary. Improve handling of SMART STATUS command failure when
1615: ATA output registers are missing (ticket #27).
1616:
1617: [CF] USB ID updates:
1618: - A-DATA SH93
1619: - Hitachi/SimpleTech 1TB
1620:
1621: [CF] configure.in: Print configuration summary.
1622:
1623: [CF] smartctl -l xselftest,selftest: Print old log if extended self-test
1624: log index is out of range. Workaround for bad log data from Intel
1625: X25-M G2 (ticket #66).
1626:
1627: [CF] USB ID updates:
1628: - LaCie Desktop Hard Drive
1629: - Prolific PL2507 (unsupported)
1630: - Seagate FreeAgent Go FW
1631: - WD My Book Essential
1632:
1633: [CF] Linux: Add '/dev/sd[a-c][a-z]' to smartd DEVICESCAN.
1634:
1635: [CF] smartd: Other config entries may precede DEVICESCAN.
1636: Very first step towards a more flexible device scanning.
1637:
1638: [CF] Windows: Use '.win64' in names of 64-bit binary packages.
1639: Use correct 'strip' program when cross-compiling.
1640:
1641: [CF] Add update script to make targets 'dist' and 'clean',
1642: set +x permission, update svn:ignore.
1643:
1644: [CF] Add 'update-smart-drivedb' script (ticket #59).
1645: The script updates the drive database from SVN.
1646: It is installed if '--enable-drivedb' is configured.
1647:
1648: [MS] drivedb.h updates:
1649: - Seagate Medalist 1720
1650: - SuperTalent UltraDrive GX SSD
1651: - Intel X25-M SSD
1652:
1653: [CF] Makefile.am: Fix unix2dos and makensis parameters to allow
1654: to build the Windows installer on Linux also.
1655:
1656: [CF] Makefile.am: Use a separate build rule for each man page to
1657: avoid compatibility problems with BSD make.
1658:
1659: [AS] drivedb.h updates:
1660: - Fujitsu MHZ2 BK series
1661:
1662: [MS] drivedb.h updates:
1663: - SAMSUNG SpinPoint F3 series
1664: - SAMSUNG SpinPoint F3 EG series
1665: - SAMSUNG SpinPoint M5 series
1666: - Western Digital Caviar Green 6400AADS
1667: - more Western Digital VelociRaptor variants
1668:
1669: [AS] FreeBSD: disable 48-bit commands in the ata_pass_through interface,
1670: there is no 48-bit support in the IOCATAREQUEST ioctl.
1671:
1672: [CF] smartctl: Add option '-l scterc[,READTIME,WRITETIME]' to get/set
1673: the SCT Error Recovery Control time limit (ticket #50).
1674:
1675: Patch was provided by Richard Gregory:
1676: http://www.csc.liv.ac.uk/~greg/projects/erc/
1677: Modified for new ata_pass_through() interface.
1678: Linux HPT fixes ommitted for now.
1679:
1680: [CF] Fix SCT temperature table commands on big endian CPUs.
1681:
1682: [MS] drivedb.h updates:
1683: - more Seagate Momentus 5400.6 drives
1684: - HP 500GB drive MM0500EANCR
1685:
1686: [CF] Windows: Cleanup I/O-control declarations, rely on include
1687: files if possible.
1688:
1689: [CF] Windows: Compile fixes for 64-bit exe (EXPERIMENTAL).
1690: Update build info in INSTALL file.
1691:
1692: [CF] drivedb.h update:
1693: - Patriot Torqx SSD (patch provided by Gianpaolo Cugola)
1694:
1695: [CF] Makefile.am: Avoid duplication of man page filter script.
1696:
1697: [CF] smartd: Add option '-C, --capabilities' if libcap-ng is available
1698: (ticket #45).
1699: Support is added if libcap-ng is found during build. This can
1700: be overridden by configure option '--with-libcap-ng=[auto|yes|no]'.
1701:
1702: Based on Debian patch:
1703: http://patch-tracker.debian.org/patch/series/view/smartmontools/5.39-3/62_lowcap.patch
1704: Modified to fix regression (ticket #41, Debian bug 564876).
1705:
1706: [CF] Bugfix release 5.39.1.
1707:
1708: [CF] Linux: Fix spin-up of SATA drive if '-n standby' is used
1709: (ticket #37). For some reason, this happens if the SCSI/SAT
1710: device is opened with O_RDWR instead of O_RDONLY.
1711:
1712: [CF] Windows: Fix parsing of 'tw_cli' output for 3ware 9.5.x release
1713: (ticket #43).
1714:
1715: [CF] Add USB IDs of Seagate FreeAgent Go, Seagate Expansion Portable
1716: and WD My Passport (IDE).
1717:
1718: [CF] autogen.sh: Fix version regexp, allow automake 1.11.1.
1719:
1720: [CF] Linux: Allow smartd 'DEVICESCAN -d sat' (ticket #13).
1721: Detects (S)ATA devices behind a standard SAT layer
1722: (Vendor ID: "ATA "), but not USB bridges with SAT support.
1723: Only added for backward compatibility with 5.38.
1724: No longer needed as 'DEVICESCAN' without '-d' includes these devices.
1725:
1726: [CF] Add USB ID of Seagate FreeAgent Desktop.
1727:
1728: [CF] smartd: Fix directive '-l selftest' (ticket #36)
1729: Regression was introduced with r2773.
1730:
1731: [CF] smartd: Don't disable attribute tracking if read thresholds fails.
1732: Windows: Don't return dummy thresholds if IOCTL_STORAGE_QUERY_PROPERTY
1733: or 3ware CLI is used to read SMART data.
1734:
1735: [CF] Windows: Print warning if admin rights are missing.
1736:
1737: [CF] Replace some 'EXIT(status)' calls by 'return status'.
1738: Remove unnecessary casts from 'nonempty()' calls.
1739:
1740: [CF] Windows: Set ata_device::ata_identify_is_cached() return value
1741: according to I/O-control actually used.
1742:
1743: [CF] Print ATA output registers if SMART status command returns bogus
1744: register values.
1745:
1746: [CF] Windows: Don't return false ATA version info if IDENTIFY data
1747: is build from IOCTL_STORAGE_QUERY_PROPERTY result or from 3ware CLI
1748: output.
1749: smartctl: Handle missing info about ATA version in '-i' output.
1750:
1751: [CF] smartctl: Don't print log directory if '-q errorsonly' is specified.
1752:
1753: [CF] smartctl: Fix option '-q, --quietmode' (ticket #11).
1754: Regression was introduced with r2807.
1755:
1756: [CF] drivedb.h update:
1757: - SAMSUNG SpinPoint F2 EG series
1758:
1759: [CF] Add USB ID of Samsung Story Station.
1760:
1761: [MS] drivedb.h update:
1762: - Hitachi Travelstar 5K320: some EA models miss last 2 "0"
1763: in model string
1764: - Seagate Barracuda LP series
1765:
1766: [CF] drivedb.h update:
1767: - Crucial M225 SSD
1768:
1769: [CF] drivedb.h updates:
1770: - WDC Scorpio Blue Serial ATA (640GB, 750GB, 1TB)
1771: - WDC My Passport Essential SE
1772:
1773: [CF] Add USB ID of Toshiba PX1270E-1G16.
1774:
1775: [CF] Happy New Year! Update copyright year in version info.
1776:
1777: [CF] drivedb.h update:
1778: - SAMSUNG SpinPoint M40/60/80 series
1779:
1780: [CF] Add direct access to 48-bit LBA register in 'ata_in/out_regs_48bit'.
1781:
1782: [DL] drivedb.h updates:
1783: - WDC My Passport Essential/USB (capacity 250GB, 400GB & 500GB)
1784:
1785: [DL] -r ataioctl,2: print text representation of data also (ticket #32)
1786:
1787: [DL] FreeBSD: freebsd_ata_device::ata_pass_through implemented (part of ticket #18)
1788:
1789: [CF] drivedb.h updates:
1790: - Hitachi Travelstar 7K320 (ticket #28)
1791: - Hitachi Travelstar 7K500
1792:
1793: [DL] -l gpllog,...: print text representation of data also (ticket #30)
1794:
1795: [DL] FreeBSD: check reallocf() result for failures
1796:
1797: [AS] FreeBSD: fixing crash on kFreeBSD (#29), patch provided by Petr Salinger
1798:
1799: [CF] Makefile.am: 'make check' now tests the syntax of drivedb.h.
1800:
1801: [CF] Cygwin: Open drive database files in text mode.
1802:
1803: [CF] Cygwin: Check for 'syslogd' and 'syslog-ng' in initd script.
1804:
1805: [CF] Windows: Disable Win9x/ME specific code if no longer supported
1806: by compiler.
1807:
1808: [CF] Add '-v ID,FORMAT:BYTEORDER[,NAME]' to specify byte order
1809: of attribute raw value.
1810:
1811: [CF] configure.in: Change --with-docdir default from
1812: 'PREFIX/share/doc/smartmontools-VERSION' to
1813: 'DATADIR/doc/smartmontools' to make it consistent with
1814: --docdir option added in autoconf 2.6x (ticket #24).
1815: Autoconf 2.5x is still supported.
1816:
1817: [CF] Move drive database entries from 'knowndrives.cpp' to new file
1818: 'drivedb.h'. This allows to update the drive database from SVN
1819: if installation was configured with '--enable-drivedb'.
1820: Remove the Makefile target to create 'drivedb.h'.
1821:
1822: [CF] do_release: Add support to release from a dir below 'branches'.
1823: Accept partial checkouts.
1824:
1825: smartmontools 5.39.1 2010-01-28
1826:
1827: [CF] Linux: Fix spin-up of SATA drive if '-n standby' is used
1828: (ticket #37). For some reason, this happens if the SCSI/SAT
1829: device is opened with O_RDWR instead of O_RDONLY.
1830:
1831: [CF] Windows: Fix parsing of 'tw_cli' output for 3ware 9.5.x release
1832: (ticket #43).
1833:
1834: [CF] Linux: Allow smartd 'DEVICESCAN -d sat' (ticket #13).
1835: Detects (S)ATA devices behind a standard SAT layer
1836: (Vendor ID: "ATA "), but not USB bridges with SAT support.
1837: Only added for backward compatibility with 5.38.
1838: No longer needed as 'DEVICESCAN' without '-d' includes these devices.
1839:
1840: [CF] smartd: Fix directive '-l selftest' (ticket #36)
1841: Regression was introduced with r2773.
1842:
1843: [CF] smartctl: Don't print log directory if '-q errorsonly' is specified.
1844:
1845: [CF] smartctl: Fix option '-q, --quietmode' (ticket #11).
1846: Regression was introduced with r2807.
1847:
1848: [CF] Happy New Year! Update copyright year in version info.
1849:
1850: [DL] FreeBSD: check reallocf() result for failures
1851:
1852: [AS] FreeBSD: fixing crash on kFreeBSD (#29), patch provided by Petr Salinger
1853:
1854: [CF] do_release: Add support to release from a dir below 'branches'.
1855: Accept partial checkouts.
1856:
1857: smartmontools 5.39 2009-12-09
1858:
1859: [CF] do_release: Commit CHANGELOG and NEWS also. Allow to review changes.
1860:
1861: [CF] Linux: Add workaround for Adaptec series 2, 5 and 5Z controllers
1862: with firmware >= 17380. Patch was provided by Phil Wilson, see:
1863: http://linux.adaptec.com/2009/07/24/using-smartmontools-538-with-series-255z-controllers-with-firmware-17380-onwards
1864:
1865: [CF] configure.in: Add '-fno-strict-aliasing' to CXXFLAGS if supported.
1866: This suppresses gcc 4.4.1 warnings on Linux and avoids possible
1867: unsafe optimizations (ticket #23).
1868: Patch was provided by Manfred Schwarb.
1869:
1870: [CF] Avoid truncation of configure arguments in '-V' output.
1871:
1872: [AS] Added USB IDs of WD Passport USB Portable
1873:
1874: [CF] Linux: Fix segfault in 3ware interface (ticket #22).
1875:
1876: [MS] knowndrives.cpp updates:
1877: - Hitachi Deskstar 7K2000
1878: - Seagate Momentus 7200 FDE.2 series
1879:
1880: [CF] Add USB ID of WD My Passport 070A.
1881: knowndrives.cpp update:
1882: - WD My Passport hard drive (USB interface)
1883:
1884: [CF] smartd: Write 'worst' attribute value to '.state' file also.
1885: This allows to use state persistence with 'raw64' attributes.
1886:
1887: [CF] Rework ATA SMART attribute check in smartctl and smartd.
1888: smartd: Ignore normalized attribute value and threshold
1889: if 'raw64' or 'hex64' format is selected.
1890:
1891: [CF] Add USB IDs of Iomega LPHD080-0, 2 Genesys Logic bridges and
1892: Initio 316000.
1893:
1894: [MS] knowndrives.cpp update: Hitachi Travelstar 5K320 series
1895:
1896: [CF] smartctl: Ignore normalized attribute value and threshold
1897: if 'raw64' or 'hex64' format is selected.
1898:
1899: [CF] knowndrives.cpp updates:
1900: - add OCZ-Vertex raw64 attributes
1901: - add OCZ-Agility
1902: Thanks to Marcin Marszalek for the patch.
1903:
1904: [CF] Add '-v ID,hex*' print formats. Fix '-v N,FORMAT,NAME' parsing.
1905:
1906: [CF] Add '-v ID,raw64[,...]' print format based on a patch provided
1907: by Marcin Marszalek.
1908:
1909: [CF] Add '-v ID,RAW_FORMAT[,ATTR_NAME]' option. This allows to add new
1910: attributes without the need to enhance the '-v' option.
1911: Rework attribute name and raw value formatting.
1912:
1913: [CF] Fix auto_ptr initialization in linux_scsi_device::autodetect_open().
1914:
1915: [CF] Remove duplicate function smart_device_list::add().
1916: Replace calls with push_back().
1917:
1918: [MS] attribute update:
1919: trim attribute names to 23 chars
1920:
1921: [CF] Add smart pointer class template to manage device object pointers.
1922: Remove related 'delete' calls and 'try/catch' blocks.
1923:
1924: [CF] do_release: Replace generation of '*.asc' by '*.md5' and '*.sha1'.
1925:
1926: [MS] attribute updates:
1927: - change attributes 202,204,205 to the meanings as found in wdidle3.exe
1928: retain old entries as comments (possible Fujitsu use)
1929: - add attribute 240 as found in Fujitsu MHY2xxxBH
1930:
1931: [MS] attributes updates:
1932: - attributes 225, 232 and 233 for Intel X25-E SSD
1933: - non-conflicting attributes extracted from wdidle3.exe
1934: (thanks to Franc Zabkar and Dan Lukes)
1935:
1936: [CF] Update Windows and ./configure info in INSTALL file.
1937:
1938: [CF] Update 'do_release' script for SVN.
1939:
1940: [MS] knowndrives.cpp updates:
1941: - Western Digital MyPassport Essential hard drive (USB interface)
1942: - Seagate Momentus 7200.4 series
1943: - Western Digital Raptor X
1944: - Intel X25-E SSD
1945:
1946: [CF] knowndrives.cpp updates:
1947: - New Seagate 7200.11 firmware version
1948: - Update IBM link
1949:
1950: [CF] smartctl: Use printf() instead of pout() for exception error
1951: messages to avoid access to bogus 'con->dont_print'.
1952:
1953: [CF] smartd: Add missing help texts for '-A', '-B' and '-s'.
1954:
1955: [CF] Add missing check for log page 0x11 support to smartctl
1956: '-l sataphy' option.
1957:
1958: [CF] Add USB ID of Freecom Hard Drive XS.
1959:
1960: [AS] Linux: Autodetect DELL PERC and MegaRAID controllers.
1961: Hiding debug messages coming from megaraid code.
1962:
1963: [AS] Linux: Fixed SATA drives support on megaraid device (see ticket #15).
1964:
1965: [AS] FreeBSD: Removed all old detection code, moving everything to
1966: the objects. Now we are using CAM/ATA enumerators to guess device
1967: type.
1968:
1969: [AS] FreeBSD: Added autodetection for the ada disks (untested).
1970: Code for USB device detection refactored.
1971:
1972: [AS] FreeBSD: cam_get_umassno rewritten using XPT_PATH_INQ
1973:
1974: [AS] FreeBSD: do not open/close cam device on every request for SCSI
1975: disks. Use com->camdev both for SCSI and ATAPICAM.
1976:
1977: [AS] FreeBSD: added support for the ada disks, based on agapon patch
1978:
1979: [CF] Add names for attributes 184 and 188, see ticket #17.
1980:
1981: [CF] configure.in: Change configure date syntax.
1982: Add message to '-mno-cygwin' option check.
1983:
1984: [GK] Add names for some attributes used in MLC flash drives:
1985: 175, 176, 177, 181, 182
1986:
1987: [CF] Windows: Check support of gcc '-mno-cygwin' option in configure.
1988: This option has been removed in Cygwin gcc 4.x. Update INSTALL
1989: instructions accordingly.
1990:
1991: [CF] Increase SCSI_TIMEOUT_DEFAULT from 6 to 20 seconds to avoid
1992: timeouts when a disk spins up from standby mode.
1993:
1994: [CF] Add USB ID of AcomData 504 (OnSpec USB bridge).
1995:
1996: [AS] Correcting manual pages (FreeBSD related)
1997:
1998: [AS] FreeBSD: fix FTBFS on GNU/kFreeBSD (reported by derevko).
1999:
2000: [AS] FreeBSD: Add USB autodetection to smartd DEVICESCAN directive.
2001:
2002: [CF] Add USB ID of Myson Century CS8818, add some comments.
2003:
2004: [CF] Return info strings from 'smart_interface::get_*()' functions as
2005: 'std::string' instead of 'const char *'. Static buffers are no
2006: longer needed.
2007:
2008: [SZ] FreeBSD: Fix highpoint type detection and ioctl failed for parameter
2009: error.
2010:
2011: [CF] Linux: Add USB autodetection to smartd DEVICESCAN directive.
2012:
2013: [CF] Add USB IDs of Maxtor Basics Desktop and ISD-300A1.
2014:
2015: [AS] Use malloc() to ensure that the read buffer lands on a single
2016: page. This avoids some bugs seen on LSI controlers under
2017: FreeBSD.
2018:
2019: [CF] Add missing help text for '-d usb*' options.
2020:
2021: [CF] Linux: Dereference '/dev/disk/by-*/*' symlink before device type
2022: autodetection.
2023:
2024: [AS] FreeBSD: Support SATA disks attached to a SAS controller (based on
2025: patch from freebsd ports tree).
2026:
2027: [AS] FreeBSD: Added FreeBSD 8 libusb2 device autodetecion, new
2028: configure check for -lusb.
2029:
2030: [AS] FreeBSD: Added USB device autodetection and fixed -d switch behavior.
2031:
2032: [AS] FreeBSD: Migrate os_freebsd.cpp to new interface.
2033:
2034: [CF] Fix max number of 3ware devices, 128 devices are supported again.
2035: Regression was introduced during migration to new interface.
2036: Thanks to Michael Holweg for the problem report.
2037:
2038: [CF] Windows installer: Add 'DisplayVersion' to uninstall registry key.
2039:
2040: [MS] knowndrives.cpp updates:
2041: - Marvell SSD SD88SA024BA0
2042: - Fujitsu MHZ2 BH series
2043: - Fujitsu MHZ2 BJ series
2044: - Seagate Maxtor DiamondMax 23
2045: - WD Caviar Green: Add some 32MB cache variants
2046: - relax OCZ-Vertex pattern
2047:
2048: [CF] Add USB ID of Verbatim FW/USB160.
2049:
2050: [CF] Fix data type bug in checksum test for multi sector logs.
2051:
2052: [CF] Add USB ID of Seagate FreeAgent Go.
2053:
2054: [MS] Add experimental feature to log attribute values at each check
2055: cycle (ATA only), activated with the smartd option
2056: "-A PREFIX" / "--attributelog=PREFIX".
2057: Introduce configure options "--enable-attributelog" and
2058: "--with-attributelog=PREFIX" to enable feature by default.
2059:
2060: [DG] [SAT] Heads up about a non backwardly compatible change
2061: introduced in draft SAT-2 (sat2r8b.pdf) that will break our
2062: existing SAT processing code. Action needed if change stands.
2063:
2064: [MS] smartd.cpp: Adjust umask
2065:
2066: [CF] Makefile.am: Remove 'uninstall-docsDATA' target to fix
2067: 'make distcheck' with automake 1.11. The 'make uninstall'
2068: of examplescripts fails if docdir does no longer exist.
2069:
2070: [CF] Remove 'scsiata.h'. The 'scsiata.cpp' module now implements
2071: parts of 'dev_interface.h'.
2072:
2073: [CF] smartctl: Don't report an attribute as failed if threshold is 0.
2074:
2075: [CF] Print only one warning on checksum errors in multi sector log.
2076: Remove casts from calls of checksum().
2077:
2078: [DG] minor changes to SCSI background scan strings
2079:
2080: [MS] knowndrives.cpp updates:
2081: - Fujitsu MHW2 BJ series
2082: - WD Caviar Black family
2083:
2084: [MS] Makefile.am: Make creation of svnversion.h independent of
2085: locale settings
2086:
2087: [CF] Require to specify PORT parameter of '-d usbjmicron' if two disks
2088: are connected.
2089:
2090: [CF] smartctl: Limit default number of printed entries for
2091: '-l xerror' to 8, for '-l xselftest' to 25.
2092:
2093: [CF] smartctl: Fix number of entries in '-l xselftest' output.
2094:
2095: [CF] Add USB IDs of a SunplusIT bridge, three WD drives, and an
2096: unsupported Iomega drive.
2097:
2098: [CF] Makefile.am: Use 'svnversion' instead of 'svn info' to get
2099: the revision number. This also checks for mixed and modified
2100: working copies.
2101:
2102: [CF] Remove CVS Id strings from '-V, --version' output.
2103:
2104: [CF] Update CONTRIBUTORS section on man pages.
2105:
2106: [CF] Makefile.am: 'make maintainer-clean' now removes also files
2107: generated by './autogen.sh'.
2108:
2109: [CF] Invalidate 'do_release' script, it needs some rework for SVN.
2110:
2111: [CF] Update documentation files for SVN.
2112:
2113: [CF] Rename trunk/sm5 to trunk/smartmontools.
2114:
2115: [CF] Print SVN revision number instead of time in version info line.
2116: Get SVN revision number from svn (if available) or guess from
2117: Id strings. Rename generated file to svnversion.h.
2118:
2119: [CF] Makefile.am: Modify generation of cvsversion.h for SVN.
2120:
2121: [GP] Convert CVS repository to SVN.
2122:
2123: [CF] smartd: Fix size of monitor flag array from previous commit.
2124:
2125: [CF] Makefile.am: Add missing 'megaraid.h'.
2126:
2127: [CF] smartd: Add '!' flag to '-r' and '-R' directives. If specified,
2128: message is logged as LOG_CRIT and warning mail is sent if
2129: attribute normalized or raw value changes.
2130:
2131: [CF] Replace global 'con->...' variables used for selective self-tests
2132: by local variables.
2133:
2134: [GK] Add names for some attributes used in Samsung MLC drives:
2135: 178-180 & 183
2136:
2137: [CF] smartctl: Add option '-x, --xall' to print all info including
2138: extended SMART logs and non-SMART info.
2139:
2140: [CF] smartctl: Add '-l xerror,error' and '-l xselftest,selftest' to print
2141: the old logs if the extended logs are not supported.
2142:
2143: [MS] knowndrives.cpp updates:
2144: - Western Digital AV-GP series
2145: - Transcend Solid-State Drive and Transcend Solid-State Drive V series
2146: - Seagate Momentus 5400.5 series
2147:
2148: [CF] Disable 48-bit ATA commands for JMicron USB bridges by default
2149: because these commands do not work with all devices.
2150: Add '-d usbjmicron,x' to enable 48-bit commands.
2151: Thanks to Alexander Shaduri for the problem report.
2152:
2153: [CF] smartd: Don't ignore the '-n' directive when a self-test is
2154: scheduled. Start the self-test later when the disk is active
2155: again.
2156:
2157: [DG] SCSI (SAS): implement '-l sasphy,reset' (reset part was stub
2158: prior to this)
2159:
2160: [DG] add 'ATA, SCSI command sets and SAT' section to smartctl.8 .
2161: [SCSI] add 'number of background medium scans' field
2162:
2163: [DG] SCSI (SAS): add '-l sasphy' and '-l sasphy,reset' into smartctl
2164: to output SAS device phy information (from the Protocol specific
2165: log page)
2166:
2167: [CF] autogen.sh: Remove 'CYGWIN=check_case:strict', this does no
2168: longer work on Cygwin 1.7. Print warning if Automake version
2169: cannot handle case insensitive filesystems.
2170:
2171: [CF] Remove '#define TRUE/FALSE', use 'bool' and 'true/false'.
2172:
2173: [CF] Add 'options' parameter to SCSI printing routine. Move global
2174: 'con->...' smartctl variables to 'options' parameters of
2175: printing routines.
2176:
2177: [CF] Windows: Remove outdated entry about undocumented system calls
2178: from WARNINGS file.
2179:
2180: [CF] Print General Purpose Logs even if GPL feature bit is missing.
2181: Needed for some older disks which implement READ LOG EXT but
2182: do not report the GPL feature set.
2183: Change order of the extended log outputs ('-l xerror',
2184: '-l xselftest', '-l sataphy'). Extended logs are now printed
2185: before their old versions.
2186:
2187: [CF] autogen.sh: automake 1.10.2 and 1.11 are OK.
2188:
2189: [CF] Fix syntax error in prototype of 'safe_snprintf()'.
2190: Thanks to Alexander Shaduri for bug report and patch.
2191:
2192: [DG] SCSI: Fetch load-unload cycle counts.
2193:
2194: [CF] Windows: Add Win-7 and Win2008 to get_os_version_str().
2195:
2196: [CF] smartd: Fix '-M test' directive in conjunction with '-s' option.
2197: Thanks to Matthias Becher for the problem report.
2198:
2199: [MS] knowndrives.cpp updates:
2200: - Add Seagate Barracuda 7200.12 series
2201: - Add Seagate Momentus 5400.4 series
2202: - Add Hitachi Deskstar 7K1000.B series
2203: - Add Transcend SSD TS32GSSD25-M
2204: - Add OCZ Vertex 1199
2205:
2206: [CF] knowndrives.cpp updates:
2207: Add Samsung S250 series.
2208: Add '-v 198,increasing' to Samsung P80.
2209: Replace '#if/#endif' by comment to fix configure option
2210: '--enable-drivedb'.
2211:
2212: [CF] knowndrives.cpp update:
2213: Add Seagate 7200.11 with 'CC' firmware which is unaffected
2214: by the bug. Thanks to Bas Mevissen for the patch.
2215:
2216: [CF] Replace global 'con->...' variables used for drive presets
2217: by local variables.
2218:
2219: [CF] Simplify '-v' vendor attribute option parsing.
2220: Add '-v 197,increasing' and '-v 198,increasing' options
2221: to specifiy that an uncorrectable count is never reset.
2222: This modifies the printed attribute names and smartd's
2223: default setting of '-C' and '-U' directives.
2224: Both '-v' options can also be preset in the drive database.
2225:
2226: [CF] Add '+' modifier to smartd '-C' and '-U' directives.
2227: If specified, a warning is only printed if the raw value
2228: increases.
2229:
2230: [CF] Add smartctl option '-l xselftest[,NUM]' to print
2231: ATA SMART Extended Self-test Log (GP Log 0x07).
2232:
2233: [CF] Add experimental option '-d usbsunplus' for drives behind
2234: SunplusIT USB bridges. Tested on WinXP with SPIF215(?) in
2235: TrekStor DataStation maxi m.u.. Many thanks to SunplusIT
2236: tech support for providing the required information.
2237:
2238: [CF] Windows: Provide a non-console version of smartctl.exe
2239: as smartctl-nc.exe. This prevents that a new console is
2240: opened when smartctl is run from a GUI program with
2241: stdio redirected.
2242: Used by GSmartControl (http://gsmartcontrol.berlios.de/).
2243:
2244: [CF] Remove support for platforms without getopt_long() in
2245: smartctl.cpp and smartd.cpp. If getopt_long() is missing,
2246: ./configure aborts with an explanatory message.
2247: For now, short option help texts are only removed from
2248: os_linux.cpp and os_win32.cpp. HAVE_GETOPT_LONG is still
2249: defined in config.h.
2250:
2251: [CF] Add smartctl '-d test' option to print the result of the
2252: device type detection.
2253:
2254: [CF] Enhance USB device type autodetection, use bcdDevice if known.
2255: Add Cypress CY7C68300B/C (AT2LP) to the table.
2256:
2257: [CF] Linux: Add experimental USB device type autodetection.
2258: Uses USB ID info found through symlink "/sys/block/sdX/device".
2259:
2260: [CF] Windows: Add experimental USB device type autodetection.
2261: Uses WMI command line tool 'wmic' to query USB ID.
2262:
2263: [CF] Add function smart_interface::get_usb_dev_type_by_id() to map
2264: USB vendor:product IDs to '-d type' names. Can be used by
2265: platform dependent layer to autodetect USB devices if ID of
2266: USB bridge is known.
2267:
2268: [CF] smartd: Log changes of self-test execution status if
2269: '-l selftest'is specified.
2270:
2271: [CF] knowndrives.cpp update:
2272: Samsung SpinPoint F1 RE series
2273:
2274: [MS] knowndrives.cpp update:
2275: Seagate Momentus 5400.6 series
2276:
2277: [CF] Add forgotten SCSI sense checks to class usbjmicron_device.
2278:
2279: [CF] Add new SMART STATUS check command for JMicron USB bridges.
2280: Should support also older chip versions and prevents a race
2281: condition.
2282:
2283: [CF] Windows: Fix win_scsi_device::scsi_pass_through() for single byte
2284: data transfers. Required for JMicron SMART STATUS check.
2285:
2286: [MS] knowndrives.cpp update:
2287: Add Hitachi Travelstar C4K60 family (1.8" slim drives)
2288:
2289: [MS] Workaround for huge raw values of attribute 9, needed
2290: for Hitachi Travelstar C4K60. For the Power_On_Minutes case,
2291: clip the display to 4 bytes and show the remaining part,
2292: if existent, in parens.
2293:
2294: [CF] Add experimental option '-d usbjmicron[,PORT]' for drives
2295: behind JMicron USB bridges. Tested on WinXP with JM20336 in
2296: AixCase AIX-ESU35CD. Many thanks to JMicron tech support
2297: for providing the required information.
2298:
2299: [MS] knowndrives.cpp update:
2300: Add WD Caviar Green 8MB and 32MB cache variants, stretch to 2TB.
2301:
2302: [CF] knowndrives.cpp updates: Add more entries for Samsung P80 disks
2303: with old and unknown firmware. Remove old entries which would
2304: match any new Samsung model reusing old firmware version number.
2305:
2306: [CF] Windows: Add a workaround for missing multi-sector support
2307: for ATA READ LOG EXT command.
2308:
2309: [CF] Fix Extended Comprehensive Error Log index base.
2310: Add workaround for Samsung disks using reserved byte as index.
2311:
2312: [CF] knowndrives.cpp updates: Update bug warnings for
2313: Seagate 7200.11, ES.2 and DiamondMax 22. Add new entries
2314: for fixed firmware versions.
2315:
2316: [CF] Add smartctl option '-l xerror[,NUM]' to print
2317: ATA SMART Extended Comprehensive Error Log (GP Log 0x03).
2318:
2319: [MS] knowndrives.cpp update:
2320: Added remaining WD Scorpio Blue SATA II drives
2321:
2322: [CF] Minor fix to remove ID 0 from 'smartctl -l sataphy ...' output.
2323:
2324: [CF] knowndrives.cpp updates: Add warnings about possible firmware
2325: bugs to Seagate 7200.11, ES.2 and DiamondMax 22 entries.
2326:
2327: [CF] knowndrives.cpp updates: Add Samsung SpinPoint F1 series.
2328:
2329: [CF] Windows: Fix return value of scsi_pass_through(). Regression
2330: was introduced during migration to new interface. SAT over USB
2331: now works on XP (both '-d sat,12' and '-d sat,16').
2332:
2333: [MS] knowndrives.cpp updates:
2334: - Added Western Digital RE2-GP family
2335: - Added Hitachi Travelstar E5K160 family
2336: - Allow uppercase variants of Hitachi 5K160 drives
2337:
2338: [CF] Fix smartctl crash on '-l directory,[gs]'. Allow to override
2339: missing GPL feature bit or missing log dir entry with
2340: '-T permissive' option.
2341:
2342: [SZ] os_freebsd.cpp, os_freebsd.h updates:
2343: Support HighPoint RocketRAID controller under FreeBSD
2344:
2345: [MS] knowndrives.cpp updates:
2346: - Added Western Digital RE3 32MB cache variants
2347: - Added WD Caviar Green 32MB cache variant (WD10EADS)
2348: - Added WD Scorpio Black family
2349:
2350: [DG] Accept half healthy (and half unhealthy) indication from the
2351: SMART RETURN STATUS. This makes allowance for SAT implementations
2352: (e.g. via USB) that truncate the SCSI sense buffer to 18 bytes.
2353: This truncation causes the SMART RETURN STATUS indication to be
2354: half health or unhealthy. If the half indication is used, then
2355: warn if '-r ioctl' is given.
2356:
2357: [MS] knowndrives.cpp updates:
2358: - Added Apple SSD
2359: - Added Seagate U8 family
2360:
2361: [DL] os_freebsd.cpp:
2362: Added support for CHECK_POWER_MODE and WRITE_LOG commands
2363:
2364: [MS] knowndrives.cpp update:
2365: There seem to exist WD Raptors with SATA II interface, add them.
2366:
2367: [MS] knowndrives.cpp updates:
2368: - Added remaining Seagate Barracuda 7200.11 drives
2369: - Added HP 1TB SATA disk
2370:
2371: [MS] knowndrives.cpp updates:
2372: - Added Maxtor 92040U6 (DiamondMax Plus 6800)
2373: - Added Seagate Maxtor DiamondMax 21 500GB version
2374: - Added QUANTUM FIREBALLlct15 22
2375: - Added QUANTUM FIREBALL CR6.4A
2376: - Added QUANTUM FIREBALLP LM20.4
2377: - Added SUN branded Toshiba MK4019GAX
2378: - Added TOSHIBA MK1016GAP and relatives: MK1[05]1[67]GAP
2379: - Added Western Digital WD800AB and WD2500AB
2380: - Some Hitachi 7K160 drives have garbage at end of name: permit it
2381:
2382: [CF] Add smartd '-n powermode,N' directive parameter to limit the
2383: number of skipped checks. Thanks to Michal Hlavinka for the patch.
2384:
2385: [MS] knowndrives.cpp updates:
2386: - Added Hitachi Endurastar J4K30/N4K30
2387: - Added Hitachi Travelstar 4K120 series
2388: - Some Hitachi 7K80 drives have garbage at end of name: permit it
2389: - IBM Travelstar 6GN series
2390:
2391: [MS] knowndrives.cpp updates:
2392: - Added Quantum Fireball ST4300A
2393: - Added Asus-Phison SSD (solid state disk)
2394: - Added Seagate DB35.3 Series
2395: - Added remaining disks of the Seagate SV35.2 Series
2396:
2397: [MS] Fix trivial compile error with "-pedantic"
2398:
2399: [MS] Workaround for huge raw values of Reallocated_Sector_Ct and
2400: Reallocated_Event_Ct for newer Fujitsu disks (only the lower
2401: 16 bits seem to be meaningful). Clip the display to 16 bits
2402: and show the remaining part, if existent, in parens. Patch by [CF].
2403:
2404: [CF] smartd DEVICESCAN: Fix autodetection of SAT devices.
2405: Thanks to Stanislav Brabec for bug report and testing.
2406:
2407: [MS] knowndrives.cpp update:
2408: Convert file to full string regex: remove "^$" from pattern
2409:
2410: [MS] knowndrives.cpp updates:
2411: - Added Seagate Momentus 5400 PSD series (hybrid drives)
2412: - Added Seagate Momentus 7200.3 series
2413: - Added Hitachi Deskstar 7K250 (SUN branded)
2414: - There are Hitachi Travelstar 5K250 drives with capital "HITACHI"
2415: - Correct regex for Maxtor VL 30 drives
2416:
2417: [CF] Add configure options '--enable-savestates' and
2418: '--with-savestates=PREFIX' to enable smartd persistence
2419: ('-s' option) by default.
2420:
2421: [CF] smartd: Add '-s ([cnr]/../.././..)' directive to run scheduled
2422: selective self-tests. Useful to perform full tests of large disks
2423: not running 24x7.
2424:
2425: [CF] Allow to read local drive database entries from optional file
2426: '${sysconfdir}/smart_drivedb.h'.
2427: Add configure options '--enable-drivedb' and '--with-drivedbdir=DIR'.
2428: If specified, drive database is read from '${drivedbdir}/drivedb.h'.
2429: (default '${prefix}/share/smartmontools/drivedb.h'). This file
2430: is build from knowndrives.cpp.
2431:
2432: [MS] knowndrives.cpp updates:
2433: - Added 640GB variants of Western Digital AAKS and AACS drives
2434: - Added Western Digital AV ATA family
2435: - Added 160GB variant of Hitachi P7K500
2436: - Added 500GB variant of Hitachi 7K1000
2437: - Some cleanup for Quantum disks
2438: - Added Seagate Maxtor DiamondMax 22 family
2439:
2440: [CF] Use full string match for regexp in drive database.
2441:
2442: [CF] Add option '-d sat+TYPE' to use SAT with controllers which
2443: require option '-d TYPE'. Should work with '-d sat+megaraid,N'.
2444: As a side effect, '-d usbcypress+TYPE' is also supported.
2445:
2446: [CF] Add parser to read drive database from a file. Add '-B' option
2447: to smartctl and smartd to specify database file name. File syntax
2448: is identical to the C/C++ syntax used to inialize the internal
2449: database array.
2450:
2451: [CF] New syntax for drive database: Specify presets by strings
2452: with '-v' and '-F' options. Use empty strings instead of NULL.
2453:
2454: [JPH] Added Linux support for viewing disks behind MegaRAID
2455: controllers
2456:
2457: [CF] smartd: Improve min/max temperature recording in conjunction
2458: with '-s' option.
2459:
2460: [CF] Add a wrapper class for FILE *.
2461:
2462: [CF] smartd: Add experimental support for state persistence (ATA only).
2463: Add option '-s' to specify path prefix for state files.
2464: Rework scheduled self-test detection to support persistence.
2465: If any test schedules are within downtime, the highest priority
2466: test is run after next startup.
2467:
2468: [CF] Remove casts from 'format_ata_string()' calls.
2469:
2470: [CF] Minor changes to fix errors and warnings from Cygwin gcc 4.3.0.
2471:
2472: [CF] smartd: Remove SCSITIMEOUT code. According to smartd.h 1.54 CVS log
2473: from 2003-10-27, it did never work.
2474:
2475: [CF] Remove dependencies ataprint.cpp and scsiprint.cpp from smartd.
2476: Move common ATA functions from ataprint.cpp to atacmds.cpp.
2477: Module scsiprint.cpp was apparently never used in smartd.
2478:
2479: [CF] Move smartd local declarations from smartd.h and utility.h to
2480: smartd.cpp. Remove smartd.h.
2481:
2482: [CF] Fixed extra '\n' in "Offline data collection status" output.
2483: Thanks to Alexander Shaduri for the patch.
2484:
2485: [CF] smartd: Separate device configuration data from device state data.
2486: Use references instead of pointers for configuration and state data.
2487:
2488: [CF] Add const-correctness and static to ATA support functions.
2489:
2490: [CF] Add a wrapper class for regex.
2491:
2492: [CF] Simplify 'create_vendor_attribute_arg_list()'.
2493:
2494: [CF] smartd: Rework of main data structures. Remove explicit memory
2495: allocations, use STL containers and structs with value semantics
2496: instead. Remove old malloc/free based memory management helper
2497: functions unless old interface is still in use.
2498:
2499: [CF] Linux: Cleanup device scan, remove name list, create objects directly.
2500:
2501: [CF] Linux: Cleanup smart_device::open(), type strings are no longer used.
2502:
2503: [CF] Remove CONTROLLER_* defines and variables unless old interface
2504: is still in use.
2505:
2506: [CF] Linux: Migrate 3ware interface to 'ata_pass_through()'.
2507: Multi-sector support is not complete yet. 48-bit commands
2508: possibly work.
2509: WARNING: Not tested, please review code before first test!
2510:
2511: [CF] Linux: Migrate os_linux.cpp to new interface.
2512:
2513: [CF] Add direct access to 16-bit registers in 'ata_in/out_regs_48bit'.
2514:
2515: [CF] Add 'ata_cmd_is_ok()' parameter check,
2516: remove 'ata_pass_through_28/48bit()' functions.
2517:
2518: [CF] Add CVS date/time from cvsversion.h to man pages also.
2519:
2520: [CF] Add configure option '--with-os-deps='os_module.o ...' to specify
2521: alternate OS interface modules. Useful for testing during migration.
2522:
2523: [CF] Remove declarations of 'optarg', 'optind', ..., include <unistd.h>
2524: instead. This fixes 'auto-importing' linker warnings on Cygwin.
2525:
2526: [CF] Add '-l sataphy[,reset]' to print SATA Phy Event Counters.
2527:
2528: [CF] Add '-l gplog,ADDR[,FIRST[-LAST|+SIZE]]' and '-l smartlog,...'
2529: to dump any log page accessible via GP or SMART read log commands.
2530:
2531: [CF] Enhance '-l directory' to print both GP and SMART Log directories.
2532: Add '-l directory[,gs]' modifiers to select GP or SMART log.
2533: Enhance 'ata_cmd_in' parameter struct for 48-bit commands.
2534:
2535: [CF] Windows: Add full ATA pass through support including 48-bit commands.
2536:
2537: [CF] Windows: Migrate os_win32.cpp to new interface.
2538:
2539: [CF] SAT: Add full ATA pass through support including 48-bit commands.
2540:
2541: [MS] knowndrives.cpp update
2542: - Added FUJITSU MHZ2250BS G2 and family
2543:
2544: [MS] knowndrives.cpp updates
2545: - Added Maxtor DiamondMax 60 94098H6
2546: - Added Maxtor DiamondMax 1280 84000A6 and family
2547: - Added Maxtor DiamondMax VL 30 31536H2 (ATA100) and family
2548: - Some Seagate Barracuda 7200.9 have garbage at end of name: permit it
2549: - Added Seagate Barracuda ATA ST320430A and family
2550: - Regression from previous checkin: add WD RE2 WD...0ABYS again
2551: - Added WD RE3 WD5002ABYS and family
2552: - Added Quantum Fireball CR13.0A
2553: - Added Hitachi Travelstar 5K250 HTS542525K9SA00 and family
2554: - Added WD AC420400D and add whole range of AC.... which
2555: have 5400rpm or higher (i.e. PIO-only drives omitted)
2556:
2557: [MS] knowndrives.cpp updates
2558: - WD: Separated entries for EIDE and SATA
2559: - WD: Separated entries for Caviar SE, SE16, RE, RE2
2560: - WD Named: WD Caviar AC series
2561: - WD Renamed: WD Caviar RE/RE2 -> WD RE/RE2
2562: - WD Renamed: WD Caviar SE/SE16 WD....AA[A-Z][A-Z] -> WD Caviar Blue
2563: - WD Renamed: WD Scorpio WD....BEV[A-Z] -> WD Scorpio Blue
2564: - Added WD Scorpio Blue WD3200BEVT
2565: - Added WD RE2 WD5001ABYS and family
2566: - Added WD Caviar Green WD5000AACS and family
2567: - Added WD VelociRaptor WD3000GLFS and family
2568: - Added Seagate Barracuda ES.2 ST31000340NS and family
2569: - Added Samsung SP80A4H
2570: - Added Maxtor DiamondMax 21 STM3160215AS and STM3320620AS
2571: - Added Seagate Barracuda 7200.7 ST380819AS
2572: - Added Maxtor DiamondMax 10 6B100P0
2573: - Added Seagate SV35.2 Series
2574: - Added Fujitsu MHY2120BH and family
2575: - Added Fujitsu MHW2080BH PL (PL variant)
2576: - Added Toshiba MK3252GSX and family
2577:
2578: [BA] Fix smartctl bug: when running in silent mode '-q errorsonly'
2579: do not print the Selective Self-test log. Any errors will
2580: ALREADY appear in the SMART Self-test log.
2581:
2582: [CF] Add missing 'const' and other minor fixes to prevent gcc warnings.
2583:
2584: [OB] Added information message about supported Areca firmware versions.
2585: It's displayed in case the ATA device identification fails.
2586:
2587: [CF] Add configuration file for Doxygen.
2588:
2589: [CF] Add new object oriented interface to access ATA and SCSI devices.
2590: smartctl and smartd are modified to use the new classes in
2591: 'dev_interface.{h,cpp}'. The template class in 'dev_tunnelled.h'
2592: is used in 'scsiata.cpp'. The code in 'dev_ata_cmd_set.{h,cpp}'
2593: supports migration from old function 'ata_command_interface()'.
2594: All existing 'os_*.cpp' modules should still work without any changes.
2595: The required adapter classes from 'dev_legacy.cpp' are automatically
2596: added by configure if necessary.
2597:
2598: [BA] Updated smartd and smartctl and smartd.conf man-page documentation
2599: to reflect support for Areca SATA RAID controller cards.
2600:
2601: [OB] Added support for Areca controllers to smartd. Extensive tests
2602: as well as documentation are still pending however.
2603:
2604: [OB] Implemented device locking for Areca controllers in smartctl
2605:
2606: [BA] Fixed selective self-test code. Data structure revision number
2607: may be != 1 if no selective self-test has ever been run. Host
2608: MUST set this value (at least at the first selective self-test
2609: instance). Thanks to Curtis Stevens of WDC for clarification.
2610:
2611: [MC] usbcypress autodetection
2612:
2613: [BA] Starting to commit Areca code. For now just smartctl.
2614: More changes and documentation coming soon.
2615: Need Areca firmware version 1.45 dated 10 June 2008 or later.
2616: May need changes in opening /dev/sg and file locking.
2617: Many thanks to Hank Wu!
2618:
2619: [CF] smartd: Fix too small name buffer for 3ware with >100 devices.
2620:
2621: [JH] now C++ Support for QNX Target
2622: already tested for QNX 6.3.2 on x86 and armle target
2623:
2624: [CF] Allow to set BUILD_INFO from make command line.
2625:
2626: [CF] Windows: Add MSVC8 support, remove MSVC6 project files.
2627:
2628: [MC] Add usbcypress device support for smartd.
2629:
2630: [CF] Add output of latest CVS date/time stamp to version info.
2631: New file cvsversion.h is generated by Makefile.
2632: Move formatting of version info to utility.cpp.
2633:
2634: [AR] Fix bug in 3ware node creation where nodes would be created
2635: then deleted, then recreated.
2636:
2637: [BA] Add missing CCISS cvs version tags to '-V' printouts.
2638:
2639: [TS] Linux: Ensure the 3ware device nodes are created with a correct
2640: SELinux security context.
2641:
2642: [AR] Add support for up to 128 devices on 3ware controllers.
2643:
2644: [CF] C++: Added new main() with exception handlers, replaced
2645: exit(x) with throw(x), removed global variable 'exitstatus'.
2646: Necessary for future changes, because exit() does not call
2647: any destructors.
2648:
2649: [SS] FreeBSD: plug file descriptor leak in smartd (only happens with
2650: CISS devices). Reported by Vadim Ostranitsyn.
2651:
2652: [SS] FreeBSD: allow smartctl to interact with SCSI /dev/pass devices,
2653: thus enabling it to work with RAID controllers that expose disks
2654: via these devices. From scottl@ via FreeBSD ports.
2655:
2656: [MC] Add usbcypress device support for smartctl.
2657:
2658: [KS] INSTALL on Solaris: updated description to use C++ compiler.
2659:
2660: [KS] configure.in on Solaris: added options for Sun's compiler to
2661: suppress trivial warnings.
2662:
2663: [KS] configure.in on Solaris: added direction to search suitable
2664: libraries for getaddrinfo().
2665:
2666: [TS] smartd on Linux: remove forgotten return from deviceopen();
2667: SCSI device descriptors had the FD_CLOEXEC flag unset.
2668:
2669: [CF] Added 'const' to avoid warning on depreciated string constant
2670: to 'char *' conversion.
2671:
2672: [CF] autogen.sh: automake 1.10.1 is OK. Updated message texts.
2673:
2674: [BA] removed smartmontools.spec file (now in CVS Attic). This
2675: was not being used by RH or FC anyhow, and was out of
2676: date and not maintained.
2677:
2678: [BA] smartd on Linux: sets FD_CLOEXEC on the opened device file
2679: descriptor. The descriptor is otherwise leaked to other
2680: applications (mail sender) which may be considered a security
2681: risk and may result in AVC messages on SELinux-enabled systems.
2682: Thanks to: Tomá Smetana" <tsmetana@redhat.com>.
2683:
2684: [BA] smartd: when sending email, to gather information about the
2685: host for the body of the email, eliminate gethostbyname()
2686: in favor of the IPv6-friendly function getaddrinfo() if the
2687: latter is available. Info may be found here
2688: http://udrepper.livejournal.com/16116.html
2689: and here
2690: http://people.redhat.com/drepper/userapi-ipv6.html
2691: Thanks to: Tomá Smetana" <tsmetana@redhat.com>.
2692:
2693: Smartmontools developers: please check that smartd still LINKS
2694: properly on your systems.
2695:
2696: [BA] Fix ugly syntax bug in os_freebsd.cpp. How did this go
2697: undetected for so long??
2698:
2699: SMARTMONTOOLS STABLE RELEASE 5.38 2008/03/10
2700:
2701: [KS] Solaris/x86: modified configure.in for Sun's compiler.
2702:
2703: [BA] smartd.initd.in addition from Erwan Velu <erwan@seanodes.com>
2704:
2705: [BA] smartd fixes:
2706:
2707: - On Linux, DEVICESCAN now automatically recognizes SATA devices
2708: behind libata, and SATA devices behind the Marvell driver, and
2709: treats them correctly.
2710:
2711: - On Linux, a '-d sat' or '-d marvell' is automatically added
2712: if libata or the marvell driver are recognized behind a SCSI
2713: device type
2714:
2715: [SS] (Maybe) fix attribute autosave in FreeBSD.
2716:
2717: [SS] Major NetBSD-specific bugfixes:
2718: - handle actual SCSI and ATA errors and not only ioctl() errors;
2719: - set up I/O request properly for AUTO_OFFLINE and AUTOSAVE commands (inspired by
2720: similar change in os_freebsd.cpp);
2721: - handle AUTO_OFFLINE and AUTOSAVE like STATUS_CHECK (like os_linux.cpp does).
2722:
2723: [GG] add kfreebsd gnu support to configure.in
2724:
2725: [BA] Fix auto-offline support in FreeBSD. Thanks to
2726: Cyrus Rahman <crahman@gmail.com> for the patch, and
2727: Eduard Martinescu for blessing it.
2728:
2729: [DG] smartd re-opens "SCSI" devices as ATA devices if a SAT layer is
2730: detected (smartd bug IMO). In Linux this upsets scsi generic
2731: device nodes (e.g. /dev/sg0). Detect the re-open in os_linux.cpp
2732: and set the O_RDWR flag (ATA uses the O_RDONLY flag).
2733:
2734: [CF] Drive database: Added Fujitsu MHW2 BH, Maxtor DiamondMax 17, 20, 21,
2735: Hitachi Travelstar 4K40, 5K120, 7K200, Deskstar 7K160, T7K500,
2736: T7K1000, Toshiba 1.8", Seagate Momentus 5400.3, 5400.3 ED, 7200.2,
2737: Barracuda 7200.11 and ES.
2738: Updated Toshiba 2.5", Seagate Barracuda 7200.9 and 7200.10.
2739: Added missing "(Hitachi )?" to Travelstar entries.
2740:
2741: [CF] Drive database: Added several Western Digital Caviar and Scorpio
2742: drives, added Caviar RE EIDE family.
2743:
2744: [CF] Drive database: Added Samsung P80 series with *-25 firmware.
2745:
2746: [CF] Replaced 'head [-n] -1' by 'sed 1...' in autogen.sh to avoid
2747: portability issues.
2748:
2749: [BA] Fixed autogen.sh script so that it uses 'grep -n 1' if 'grep -1'
2750: fails. Needed for Mac OS X 10.4. Uck.
2751:
2752: [CF] Windows: Added IOCTL_STORAGE_PREDICT_FAILURE. This allows access
2753: to ATA SMART status and data if other calls do not work.
2754: Thanks to Jaroslaw Kowalski for pointing this out.
2755: Added support to use this function without admin rights.
2756:
2757: [CF] Added ATA-8 revision 4c message text.
2758:
2759: [CF] Added compiler.h to cciss_ioctl.h header check to prevent
2760: configure warning.
2761:
2762: [SS] DragonFly support added (using os_freebsd code; untested).
2763:
2764: [CF] smartctl: Fixed ATA identify byte swapping issue on big-endian
2765: platforms. This regression was introduced by the change for
2766: '-F swapid'. Thanks to Matthew Butch for bug report and testing.
2767:
2768: [DG] SAT/SCSI: Improve SAT error processing code. Aborted commands from
2769: ATA devices (typically because SMART was disabled) were not being
2770: properly detected.
2771:
2772: [GG] smartd: wait for the pid file to show up, return an error if it doesn't
2773:
2774: [JH] fix bad return code (get STATUS) for QNX Part
2775:
2776: [JH] initial porting to QNX Neutrino 6.3.2
2777: need at this time a prerelease devb-eide driver and libcam.so.2
2778: only tested for X86 Target, but devb-eide and lobcam.so.2 available for X86/ARM
2779: the officional driver coming soon with the next QNX release
2780: create two new source files os_qnxnto.[c..h]
2781:
2782: [CF] smartd: Added option '-n, --no-fork' so that smartd works
2783: better with modern init methods. Thanks to Enrico Scholz
2784: for the patch from 2005-12-24.
2785:
2786: [CF] Windows: Improved ATA/SCSI device type detection and
2787: DEVICESCAN. This also fixes a regression in 3ware DEVICESCAN.
2788:
2789: [CF] smartd: Don't start self tests in first pass to avoid
2790: performance problems during boot.
2791: https://bugzilla.novell.com/show_bug.cgi?id=192591
2792:
2793: [CF] Fixed regression in SMART STATUS command on Win9x/ME.
2794:
2795: [BA] Fixed 3ware issue with new controllers. Documentation said
2796: that one could address up to 24 disks on a single controller,
2797: but in fact one was limited to 16 disks. This is now fixed:
2798: up to 32 disks can be addressed. Thanks to Adam Radford.
2799:
2800: NOTE1: I have patched the Linux and FreeBSD code but not
2801: modified the Win32 code (it already supports up to 32 disks).
2802:
2803: NOTE2: NOT TESTED ON LINUX. Do not use this on a production box!
2804: I will remove this NOTE2 as soon as some positive test
2805: reports are recieved.
2806:
2807: NOTE3: NOT TESTED ON FREEBSD. Do not use this on a production box!
2808: I will remove this NOTE3 as soon as some positive test
2809: reports are recieved.
2810:
2811: [CF] Windows installer: Added explorer drive menu, CMD window,
2812: UBCD4Win plugin, smartd service update and other minor
2813: improvements.
2814:
2815: [CF] Windows: Modified drive letter handling for explorer drive
2816: context menu: try SCSI if type is unknown, allow 'X:\.' syntax.
2817:
2818: [CF] Windows: Added automatic ATA/SCSI device type detection and
2819: SCSI device scanning. The device names '/dev/sdX' and
2820: '/dev/pd<n>' now work for both ATA and SCSI disks.
2821:
2822: [CF] smartctl: Added ability to parse '-r ataioctl,2' output from
2823: stdin ('-') and simulate the ATA commands for testing purposes.
2824:
2825: [BA] SMART Attributes: added 187, 189, more accurate name for 190.
2826:
2827: [CF] Windows: Added drive letters 'X:' as alternate disk device names.
2828:
2829: [CF] smartctl: Added '-F swapid' to fix ATA identify string byte
2830: ordering. Added '-q noserial' to suppress serial number output.
2831:
2832: [CF] Windows: Added '/dev/n?st<n>' as alternate device names for SCSI
2833: tapes. These names are also used by Cygwin's /dev emulation layer.
2834: Thanks to Corinna Vinschen (Cygwin project lead) for pointing this
2835: out.
2836:
2837: [CF] Windows: Added IOCTL_SCSI_MINIPORT_*SMART* for commands not handled
2838: properly by SMART_IOCTL in disk class driver. This allows to use
2839: READ_LOG, WRITE_LOG and ABORT_SELFTEST even if the driver does not
2840: support ATA_PASS_THROUGH.
2841:
2842: [CF] Added ATA-8 revision 4, fixed WRITE LOG '-r ioctl' output.
2843:
2844: [BA] Updated smartctl and smartd so that they can be used with the latest
2845: 3ware controllers which have 24 ports. Also updated docs.
2846: Thanks to Tim Bell at CERN.
2847:
2848: [GG] bit 4 in smartctl's return code might be set even when the dist check
2849: didn't return "DISK OK"
2850:
2851: [CF] Drive database: added '-F samsung3' for Samsung P80 firmware
2852: BH100-35.
2853:
2854: [SS] Applied patch from Dean Bennett to fix scheduled tests on
2855: Highpoint RAID controllers.
2856:
2857: [BA] Added patch from Tejun Heo http://thread.gmane.org/gmane.linux.ide/13222/focus=13235
2858: to fix broken auto-offline and auto-save via libata. Very clean fix: does it
2859: "the right way". Thanks Tejun!
2860:
2861: [CF] Added message text for ATA-7 self-test execution status 8
2862: ("... handling damage").
2863:
2864: [GG] cciss: support more than 16 disks (patch taken from
2865: http://cciss.sourceforge.net/smartmontools_cciss_more_than_16_drives.patch
2866: and adjusted for smartd)
2867:
2868: [DG] Solaris: [SCSI] add USCSI_RQENABLE flag to uscsi pass-through so
2869: sense buffer is made available. Expand reporting at this level.
2870:
2871: [GK] Darwin: Improve handling of powered-down drives.
2872:
2873: [SS] CCISS physical drive enumeration method changed (incompatibly).
2874:
2875: [CF] Fixed smartd crash on missing '-s' directive argument.
2876:
2877: [SS] Support CCISS on FreeBSD (kernel source is required until FreeBSD PR 109813
2878: is fixed).
2879:
2880: [DG] SCSI/TAPE: some IBM tape drives don't react properly to a LOG
2881: SENSE with an allocation length of 4; work around for that case.
2882:
2883: [CF] Applied Guido's patch to fix CCISS LUN array bounds check
2884: (openSUSE bug #239956) and remove trailing spaces in
2885: os_linux.cpp.
2886:
2887: [CF] Fixed 64-bit compilation issue in SCT status struct.
2888:
2889: [DG] SAT/SCSI: make real SCSI disks visible to DEVICESCAN in
2890: smartd again.
2891:
2892: [CF] Fixed check of SCT temperature table size.
2893:
2894: [CF] Added ATA-8 draft revisions, added SCT status format 3.
2895:
2896: [CF] Drive database: added Samsung T166 series.
2897:
2898: [CF] ATA: Added ',p' option for '-t scttempint,N' to make
2899: setting persistent.
2900:
2901: [CF] ATA: Added '-t scttempint,N' option to set SCT temperature
2902: logging interval.
2903:
2904: [CF] ATA: Added '-l scttemp[sts,hist]' options to print disk
2905: temperature information and history table provided by
2906: SMART Command Transport (SCT) Feature Set.
2907:
2908: [CF] ATA: Added '-t selective,{redo,next,cont}' commands to
2909: perform tests based on the last ranges still stored on
2910: disk. Added 'N+SIZE' and 'N-max' format for LBA range
2911: specification.
2912:
2913: [CF] Added Min/Max Temperature format used in attribute 190 of
2914: recent Maxtor disks (DiamondMax 20).
2915:
2916: [CF] Linux: Added check for <linux/cciss_ioctl.h> to allow build
2917: (without CCISS support) also when this file is missing.
2918:
2919: [CF] Added -F samsung3 option to correct firmware bug reporting
2920: completed self-tests as still in progress. Thanks to Manfred
2921: Schwarb for the patch.
2922:
2923: [CF] Added missing const specifiers (undetected by gcc 3.4 and 4.X)
2924: to fix compilation with gcc 2.X.
2925:
2926: [CF] Linux: compile fix for SuSE, config.h must be included first.
2927:
2928: smartmontools 5.37 Experimental Release
2929:
2930: [CF] Windows: Added alternate method for (limited) monitoring of
2931: 3ware controllers by parsing the output of CLI or 3DM.
2932: Either "tw_cli" can be run internally ("/dev/tw_cli/cx/py"),
2933: or data can be read from standard input ("/dev/tw_cli/stdin")
2934: or clipboard ("/dev/tw_cli/clip").
2935:
2936: [DG] Remove linux specific libata detect code; rely on general SAT
2937: code. smartd should now generate a sensible log message for
2938: ATA devices behind a SAT layer on all architectures.
2939:
2940: [BA] Increased max line length MAXLINELEN for /etc/smartd.conf from
2941: 128 to 256 characters to handle long strings in
2942: /dev/disk/by-id. Thanks to Martin Krafft.
2943:
2944: [PW] Drive database: added missing drives from Seagate Momentus 5400.2
2945: family
2946:
2947: [BA] Finished Christian's fix (next item below) by removing
2948: LINUX_86_64 hack from configure.in.
2949:
2950: [CF] Fixed inclusion of PRI?64 macros from inttypes.h.
2951:
2952: [CF] Windows: Added WRITE LOG to support selective self tests.
2953:
2954: [CF] Fix selective self test log revision number if '-T permissive'
2955: is specified (Tested with Samsung HD401LJ).
2956:
2957: [CF] Windows: Fixed int64 printf format for MinGW runtime.
2958:
2959: [PW] Drive database: added Seagate Barracuda 7200.10 family, Seagate
2960: Momentus 42 family, Maxtor DiamondMax 60 ATA 66 family, Maxtor
2961: DiamondMax 60 ATA 100 family, and Western Digital Caviar Serial
2962: ATA family
2963:
2964: [PW] Drive database: added missing drives from Seagate Barracuda
2965: 7200.9 family, Seagate Barracuda 7200.7 family, Seagate Momentus
2966: 7200.1 family, Toshiba 2.5" HDD family (80 GB and above), Western
2967: Digital Caviar RE Serial ATA family, Hitachi Deskstar 7K80 family,
2968: and Maxtor DiamondMax 4320 Ultra ATA family
2969:
2970: [BA] Linux: compile fix for SuSE. Check for existence
2971: of linux/compiler.h and include in os_linux.h if
2972: present. Thanks to SB.
2973:
2974: [BA] smartd: DEVICESCAN will now pick up SATA/SAT devices
2975: attached to a SCSI device tree via SAT translation.
2976: Note: this is a bit of a hack. I will document it once
2977: I know if this needs to be Linux only or can have more
2978: general application.
2979:
2980: [BA] Added a couple SATA commands to the tables -- thanks DG!
2981: Phil -- how about going through and systematically adding
2982: these new commands to atacmdnames.cpp?
2983:
2984: [BA] Linux s86_64: get rid of some compiler warnings on
2985: x86_64 Linux systems.
2986:
2987: [CF] Windows: Added missing support for READ_LOG, ABORT_SELFTEST
2988: and CHECK_POWER_STATE for 3ware 9000 controllers. Thanks to
2989: Greg de Valois for implementing this new ioctl in the driver.
2990:
2991: [PW] Drive database: added Seagate NL35 SATA family. Thanks to Kai
2992: Harrekilde-Petersen for providing a patch.
2993:
2994: [DG] [SCSI, Windows] add SPT interface for NT and later. New device
2995: names are "pd<n>", "sd<l>" and "tape<n>".
2996:
2997: [PW] Drive database: added Western Digital Scorpio family, Fujitsu MHV
2998: family, Maxtor MaXLine Pro 500 family, and Maxtor DiamondMax 11
2999: family
3000:
3001: [PW] Drive database: added missing drives from Toshiba 2.5" HDD
3002: (30-60 GB) family, Maxtor DiamondMax 10 family, Seagate Barracuda
3003: 7200.8 family, Fujitsu MHT family, and Maxtor DiamondMax Plus 8
3004: family
3005:
3006: [SB] Added examplescripts/Example4 using powersave-notify.
3007:
3008: [SB] More temperature monitoring examples in smartd.conf with DEVICESCAN.
3009:
3010: [SB] Minor improvements of SuSE part of init script.
3011:
3012: [CF] Drive database: added Samsung P80 series, P120 series, SP8004H
3013: and T series.
3014:
3015: [GG] Add CCISS (Compaq Smart Array Controller) support with contributions
3016: from Praveen Chidambaram, Douglas Gilbert, Guido Guenther and Frédéric
3017: BOITEUX
3018:
3019: [PW] Drive database: added Hitachi Deskstar T7K250 and Hitachi
3020: Deskstar 7K500 series. Thanks to L. J. Wu for providing a
3021: patch
3022:
3023: [PW] Drive database: added Maxtor MaXLine III family, Seagate U7
3024: family, Seagate ST34321A, FUJITSU MHM2060AT, FUJITSU MHT2040AS,
3025: Western Digital Caviar SE16 family, IBM Travelstar 4GT family,
3026: QUANTUM FIREBALLP KA9.1, QUANTUM FIREBALL SE4.3A, TOSHIBA
3027: MK1032GAX, TOSHIBA MK4026GAX
3028:
3029: [PW] Drive database: added missing drives from Western Digital Caviar
3030: SE (Serial ATA) and WD Raptor families
3031:
3032: [CF] Windows: Added support for 3ware 9000 controllers using extended
3033: SMART functionality in new 3ware driver. This includes DEVICESCAN
3034: support for at most 2 controllers. Thanks to Greg de Valois from
3035: AMCC/3ware for new driver features, development support and
3036: hardware for testing.
3037:
3038: [SZ] smartd: Support HighPoint RocketRAID controller under GNU/linux
3039:
3040: [DG] [SCSI] First cut for '-l background' to show background scan
3041: results log
3042:
3043: [SZ] smartctl: Support HighPoint RocketRAID controller under GNU/linux
3044:
3045: [KS] C++ compile fixes for Solaris with a few cleanups.
3046:
3047: [BA] C++ compile fixes for Darwin (thanks to CF)
3048:
3049: [CF] Removed old *.c files (now in CVS Attic).
3050:
3051: [CF] Added changes for C++ to platform independent and Windows
3052: related files.
3053:
3054: [BA] Tagged last .c Version with PRE_MOVE_TO_CPP. Copied *.c,v
3055: to *.cpp,v in CVS repository to preserve history of source
3056: files. Removed sm5_Darwin repository.
3057:
3058: [CF] smartctl: Added -n option to skip checks when disk is in
3059: low-power mode.
3060:
3061: [CF] Windows: Added alternate system call for power state check
3062: because the PASS THROUGH calls may spin up the disk.
3063:
3064: [CF] smartd: Modified power state logging to report state changes
3065: instead of standby condition.
3066:
3067: [CF] smartd: Ignore -n directive on scheduled self tests.
3068:
3069: [DG] [SCSI] Make start stop cycle counter log page decoding
3070: more robust
3071:
3072: [DG] Modify smartctl (but not smartd) to detect probable ATA
3073: devices behind a SAT layer. In the absence of an explicit
3074: device type, change to device type 'sat'.
3075:
3076: [DG] Add indication that controller (device) type has been
3077: explicitly set. Preparation for automatic detection of
3078: 'sat' device type unless user specifies a device type.
3079:
3080: [SS] NetBSD: Deliver strings from ata_identify_device properly
3081: on little- and big-endian platforms.
3082:
3083: [BA] Added published ANSI ATA-7 spec to list of recognized ATA
3084: versions.
3085:
3086: [BA] Code janitor: added missing header strings for '-V' option.
3087:
3088: [DG] [SATA] Extend 'sat' device type to allow either 12 or 16 byte
3089: variant of the SAT ATA PASS THROUGH SCSI command. Syntax is
3090: '-d sat,<n>' where <n> can be 0, 12 or 16 . The ',<n>' part
3091: is optional. Currently defaults to 16 byte variant but that
3092: could be made platform or even device dependent.
3093:
3094: [DG] [SATA] Add new 'sat' device type for SATA disks behind a
3095: SCSI to ATA Translation (SAT) Layer (SATL). Uses the ATA
3096: PASS THROUGH (16) SCSI command thence the generic SCSI
3097: passthrough for each platform.
3098:
3099: [CF] Windows: Added script and make targets to create installer
3100: with NSIS (http://nsis.sourceforge.net/)
3101:
3102: [CF] Updated hostname and links for new SourceForge CVS service.
3103:
3104: [CF] smartd: Added '-W' directive to track temperature changes
3105: and warn if temperature limits are reached.
3106:
3107: [CF] Windows: Added IOCTL_ATA_PASS_THROUGH (Win2003, XP SP2)
3108: for commands unsupported by SMART_IOCTL. Added device
3109: specific options to select subset and ordering of the ATA
3110: IOCTLs actually used. These options are specified as
3111: modifiers of the device name (/dev/hd[a-j]:[saic]+)
3112:
3113: [CF] Windows: Added support for drives 4-7 (/dev/hd[e-h]) via
3114: SMARTVSE.VXD on Win9x/ME. Thanks to Dariusz Rzonca for
3115: patch and testing.
3116:
3117: [DG] [SCSI/SATA linux] from lk 2.6.17 SATA disk identification in
3118: libata will change. Expand LibAta detection to see old
3119: identifier and new variant (VPD page 0x83).
3120:
3121: [BA] Identified Attribute 190 for Western Digital disks. This
3122: stores temperature in Celsius, just like Attribute 194.
3123: But it has a failure threshold set to correspond to the
3124: maximum design operating temperature of the disk, which
3125: is 55 Celsius on the WD800JD drives that I studied.
3126: So if this Attribute has 'failed
3127: in the past' this means that the maximum disk operating
3128: temperature has been exceeded.
3129:
3130: [GK] Darwin: Add support for AHCI drivers found in Intel-based Macs.
3131:
3132: smartmontools 5.36 Stable Release
3133:
3134: [BA] Linux: smartd/smartctl issue syntax hints to user if 3ware
3135: disk controller present with EITHER 3ware OR AMCC vendor
3136: name, and user syntax incorrect.
3137:
3138: [BA] Update copyright dates to 2006.
3139:
3140: [DG] [SCSI] Loosen sanity check on Seagate/Hitachi factory information
3141: log page so it is not skipped on recent Seagate SCSI disks.
3142:
3143: [CF] Added command 'smartd -q showtests' to list test schedules.
3144:
3145: [CF] Added command 'smartctl -P showall MODEL [FIRMWARE]' to list
3146: database entries for specific drives and firmware.
3147:
3148: [PW] Automatically set -v 9,minutes and -v 194,unknown for Maxtor
3149: DiamondMax D540X-4G drives.
3150:
3151: [DG] [SCSI] suppress various outputs when data fails sanity checks.
3152: Correct 'last n error events' log page indexing.
3153:
3154: [DG] [SCSI] changed smartctl exit status to reflect any problems in
3155: the most recent 20 self test logs [Leandro Santi]
3156:
3157: [DG] [SCSI] Fix process return value when scsiGetSmartData() fails
3158: in smartctl [Leandro Santi]
3159:
3160: [BA] Updated docs and error message to reflect Linux libata
3161: support for smartmontools starting with the 2.6.15 kernel
3162: series. Also init script support for the 'tinysofa' release.
3163:
3164: [DG] [SCSI] Mask dpofua bit when changing mode pages. Fix failure
3165: of 'smartctl -l error'.
3166:
3167: [EM] Fixed a problem with FreeBSD and 3Ware 'twe' devices
3168:
3169: [CF] Fixed a regexp in knowndrives table, added regexp syntax check
3170: via 'smartctl -P showall'.
3171:
3172: [CF] Cygwin & Windows: Fixed memory leak in function calling
3173: IOCTL_IDE_PASS_THROUGH. Thanks to Fred Schmidt for the problem
3174: report.
3175:
3176: [CF] Cygwin: added cygrunsrv support and commands "install", "remove"
3177: and "status" to smartd.initd.
3178:
3179: [SS] Fix runtime problems on big-engian NetBSD platforms (patch provided
3180: by Martin Husemann)
3181:
3182: [CF] Cygwin smartd: Open smartd.conf in textmode to allow use of
3183: Windows editors.
3184:
3185: [CF] Cygwin smartd: Added option '--service' to allow smartd running
3186: as windows service via cygrunsrv. Useful in conjunction with new
3187: syslogd support added in Cygwin 1.5.15.
3188:
3189: [CF] Windows: Added patch to avoid output of non-ascii timezone names.
3190:
3191: [EM] Incorporate various patches to provide TWE support and support for
3192: multiple 3Ware cards, Power Check Support, and FreeBSD 6.x support.
3193: Thanks to Rudolf Cejka, Frank Behrens, and Jung-uk Kim.
3194:
3195: [DG] Silence gcc 4.0.1 compile warning concerning the difference in
3196: "signedness" in pointer assignments. Changes to SCSI code
3197: and os_linux.c .
3198:
3199: [PW] Additions to knowndrives table: added missing drive from Quantum
3200: Fireball Plus LM series, added QUANTUM BIGFOOT TS10.0A, added
3201: ExcelStor J680 and J880, added Western Digital Caviar RE Serial ATA
3202: series, added missing drives from Western Digital Caviar SE series,
3203: added Seagate Momentus 4200.2 series, added missing drives from
3204: Maxtor DiamondMax 10 series, added Fujitsu MHG and MHH series, and
3205: added Hitachi Travelstar 5K100 series.
3206:
3207: [PW] Additions to knowndrives table: added Fujitsu MHU2100AT, added
3208: Fujitsu M1623TAU, added missing drives from Seagate Barracuda
3209: 7200.8 series, added Seagate Momentus 5400.2 series, and added
3210: QUANTUM FIREBALL CR8.4A.
3211:
3212: [PW] Additions to knowndrives table: added missing drive from Maxtor
3213: MaxLine II series, added Maxtor DiamondMax 2880 Ultra ATA series,
3214: added Maxtor DiamondMax 17 VL series, added Hitachi Deskstar 7K80
3215: series, and added Hitachi Deskstar 7K400 series.
3216:
3217: [CF] Windows: Fixed unsupported 'smartctl -X' on Win2000/XP by using
3218: IOCTL_IDE_PASS_THROUGH instead.
3219:
3220: smartmontools 5.34 Stable Release [NOTE: never officially released]
3221:
3222: [CF] Cygwin & Windows smartd: Increased SCSI DEVICESCAN range
3223: from ASPI adapter 0-3 to 0-9. Added diagnostic messages.
3224:
3225: [CF] Windows smartd: Added ability to run .bat files via '-M exec'
3226: directive.
3227:
3228: [CF] Cygwin smartd: Added FreeConsole() after fork() to avoid hang
3229: of terminated shell console window.
3230:
3231: [DG] [SCSI] Add code so 'smartctl -A' outputs the number of elements
3232: in the grown defect list. When this number is increasing a
3233: disk has problems. N.B. Similar logic should be added to smartd.
3234:
3235: [CF] Windows smartd: Fixed event handling to allow start of another
3236: smartd process when service is already running. Useful for testing
3237: service configuration changes in debug mode.
3238:
3239: [PW] Added following drives to knowndrives table: Western Digital Raptor
3240: family, Seagate Barracuda 7200.8 family, Maxtor DiamondMax 2160
3241: Ultra ATA and DiamondMax 10 families, Hitachi Travelstar E7K60
3242: family, Seagate Medalist 17240, 13030, 10231, 8420, and 4310,
3243: TOSHIBA MK4018GAP and MK6022GAX, ExcelStor Technology J360, and
3244: Western Digital Caviar AC14300.
3245:
3246: [PW] Added missing Fujitsu MHTxxxxAT and Seagate Barracuda 7200.7 drives
3247: to knowndrives table.
3248:
3249: [PW] Added QUANTUM FIREBALLP LM10.2 to knowndrives table. Thanks to
3250: Mike Fleetwood for submitting the patch.
3251:
3252: [KS] Solaris/SPARC: fixed not to disable automatic offline test and
3253: automatic save attributes incorrectly. Thanks to Roy Badami.
3254:
3255: [BA] Linux: smartd init script now recognizes 'trustix' distro.
3256:
3257: [DG] [SCSI] Medium and hardware errors were slipping through
3258: unreported. Fix linux SCSI sense reporting via SG_IO ioctl.
3259:
3260: [DG] [SCSI] Change lba of first failure in selftest output to
3261: decimal (was hex) to conform with ATA output.
3262:
3263: [GK] smartd: Detect most self-test failures even if the hour counter
3264: has wrapped.
3265:
3266: [BA] smartctl: list 'marvell' as option if user give invalid
3267: -d argument
3268:
3269: [CF] Windows: fixed SCSI timeout handling to allow long timeouts
3270: for selftests.
3271:
3272: [CF] Fixed buffer overflow issues in printone() and safe_vsnprintf()
3273: which results in crash on -V option (at least on Windows).
3274:
3275: [DG] [SCSI] Add explicit timeouts to INQUIRY and REQUEST SENSE (that
3276: were missed in an earlier patch). Could have impacted freebsd.
3277:
3278: [DG] When linux detects a sata_via_libata disk suggest that user try
3279: '-d ata' (rather then '-d libata). Anticipate kernel change.
3280:
3281: [YD] Added OS/2 and eComStation platform support.
3282:
3283: [PW] Added Seagate U4 family, Fujitsu MHJ and MHK families, Seagate
3284: Barracuda 5400.1, QUANTUM FIREBALLP KX27.3, QUANTUM FIREBALLP KA10.1,
3285: and ExcelStor J340 to knowndrives table.
3286:
3287: [DG] [SCSI] After report of Hitachi IC35L073UCDY10 disks locking up
3288: on log page 0x7 (last n error events), check log page (and some
3289: others) is supported (via log page 0x0) before probing.
3290:
3291: [CF] Added safe_v?snprintf() for platforms using v?snprintf()
3292: with non standard behaviour on overflow (Windows, old Linux)
3293:
3294: [CF] smartd: Added message if check power mode spins up disk.
3295:
3296: [CF] Windows: Added support for READ_LOG on WinNT4 using undocumented
3297: pseudo SCSI command via IOCTL_SCSI_PASS_THROUGH.
3298:
3299: [CF] smartd: Added ',q' option for '-n' directive to suppress 'skipping
3300: checks' log message. This prevents a laptop disk from spinning up
3301: due to this message. Thanks to Rob MacLachlan and Manfred Schwarb
3302: for pointing out problem & solution.
3303:
3304: [CF] Windows: Added function get_os_version_str() to show OS flavor in
3305: copyright message.
3306:
3307: [CF] Windows: Added function ata_identify_is_cached() to check for outdated
3308: SMART enabled bit in identify data.
3309:
3310: [CF] Windows: Added fix to prevent linkage of smartd specific win32 modules
3311: to smartctl.
3312:
3313: [PW] Added Fujitsu MPG3153AH, Hitachi Endurastar J4K20/N4K20 (formerly
3314: DK23FA-20J), Seagate Momentus family, and Maxtor Fireball 3 family
3315: to knowndrives table.
3316:
3317: [PW] Added missing Maxtor DiamondMax 16, Seagate Barracuda ATA IV, and
3318: Western Digital Caviar WDxxxAA/WDxxxBA drives to knowndrives table.
3319:
3320: [CF] Windows: Added ATA check power mode for smartd -n directive.
3321:
3322: [CF] Windows: Fixed use of new service status flag which causes hang
3323: of smartd service on WinNT4.
3324:
3325: [CF] Windows: Fixed error checking of IOCTL_IDE_PASS_THROUGH (used
3326: for READ_LOG on 2000/XP). Added some diagnostic messages on
3327: -r ataioctl[,2]. Thanks to Manfred Schwarb for bug report and testing.
3328:
3329: [BA] Fixed code bug that made it impossible to enable SMART on
3330: disks with failing health status. This would happen if the
3331: os_*.c author made STATUS and STATUS_CHECK work the same way.
3332: I have corrected this at a higher level; we now handle the
3333: case where STATUS and STATUS_CHECK are identical without
3334: issues.
3335:
3336: [LW] Make os_linux.c/marvell_command_interface() always return 0 on STATUS.
3337: Needed for a disk having bad SMART status.
3338:
3339: [CF] smartctl: Added drive family printing.
3340:
3341: [CF] autogen.sh: Allow automake 1.9, added message if automake
3342: version is unknown.
3343:
3344: [BA] smartctl: use locale-specific separators for printing disk
3345: capacity. Also use AC_CHECK_HEADERS not AC_CHECK_HEADER in
3346: configure.in.
3347:
3348: [BA] clean-up of #include structure so that -V options to smartd
3349: and smartctl work correctly. Please, don't #include header
3350: files into other header files.
3351:
3352: smartmontools 5.33 Experimental Release
3353:
3354: [BA] smartctl: ATA disks, if SMART ATTRIBUTE THRESHOLDS page has ID
3355: errors with some Attributes having NULL IDs, print Attribute
3356: info anyway (but issuing a warning to the user).
3357:
3358: [DG] [SCSI] Decode Last n error events log page; decode track following
3359: and positioning errors [Hitachi]
3360:
3361: [EM] FreeBSD: another tweak, __packed__ introduced in Version 5.0040
3362:
3363: [EM] Cleaner tweak of fixes for FreeBSD 4.x.
3364:
3365: [EM] Fix compilation errors under FreeBSD 4.x, as it is still using
3366: and old GCC
3367:
3368: [EM] Remove 3ware/FreeBSD specific files and just include pieces we need
3369:
3370: [DG] Add logic in smartd to detect 3ware, Marvell controllers and SATA
3371: disks behind an ATA-SCSI simulator (in Linux). If specific device
3372: types are not given and they are picked in a general SCSI device
3373: scan then warn and skip.
3374:
3375: [GG] insert correct path to smartd into smartd's init script
3376:
3377: [BA] Changed all default paths in documentation to reflect /usr/local as
3378: default path prefix. This affects on-line man pages, primarily.
3379:
3380: [DS] Added support for OpenBSD
3381:
3382: [BA] Added another environment variable SMART_FULLMESSAGE set by
3383: the smartd mailing feature, and modified examplescripts/Example1
3384: to illustrate it.
3385:
3386: [BA] Fixed potentially misleading messages of the form:
3387: XXX failed: success
3388:
3389: [DG] emit warning if SATA disk detected using libata in Linux; then exit
3390:
3391: [PW] Added Seagate U10 family, Hitachi Travelstar 7K60, Fujitsu MHR2020AT,
3392: and QUANTUM FIREBALLP AS20.5 to knowndrives table.
3393:
3394: [DG] Detect 3ware and Marvell controllers from SCSI INQUIRY vendor string
3395: and suggest usage of appropriate '-d' argument in smartctl.
3396:
3397: [LW] Tested the RELEASE_5_33_WITH_MARVELL_SUPPORT branch on
3398: actual Marvell 88SX5041 hardware, with success.
3399: Merged into HEAD.
3400:
3401: [BA] Fixed nasty DEVICESCAN bug
3402:
3403: [BA] Checked in RELEASE_5_33_WITH_MARVELL_SUPPORT branch with
3404: some Marvell support.
3405:
3406: [BA] Additional modifications of Ed's controller scheme. Fixed
3407: broken 3ware support under linux, problems with scanning
3408: devices in smartd, and other small problems.
3409:
3410: [CF] Added make targets to build formatted man pages (htmlman, txtman),
3411: Windows distribution (dist-win32) and MSVC6 config.h (config-vc6).
3412:
3413: [EM] Minor change to FreeBSD inclusion of 'twe' include files. Add
3414: code to check if they exising in /usr/include/sys to use those
3415: in preference to ones added here
3416:
3417: [EM] Very preliminary support attempt for 3Ware controllers under
3418: FreeBSD. Also, switched 'escalade_type/escalade_port' to
3419: 'controler_type/controller_port' and moved away from
3420: 'tryata/tryscsi' to using new 'controller*' variables to
3421: determine which controller type (ATA/SCSI/3Ware) to use.
3422:
3423: [GK] Added initscript support for Darwin.
3424:
3425: [CF] Windows smartd: Added ability to run smartd as a windows service,
3426: including new commands "smartd install ..." and "smartd remove"
3427: to install and remove the service registry entry.
3428:
3429: [BA] smartd: warn user if -s regexp regular expression contains
3430: characters other than 0123456789.*()|+?[-]{}:=SLCO since such
3431: characters are 'suspicous' and may indicate a poorly formed
3432: regexp. Extended regular expression gurus: can this list be
3433: reduced somewhat?
3434:
3435: [CF] Fixed bug in Windows smartd: Missing close of config file when
3436: configuration is reloaded by smartd daemon.
3437:
3438: [CF] Windows smartd: Added mail warning feature using the "Blat"
3439: (http://blat.sourceforge.net/) mailer as a default.
3440:
3441: [PW] Added Maxtor DiamondMax Plus 5120 Ultra ATA 33 series and TOSHIBA
3442: MK3017GAP to knowndrives table.
3443:
3444: [CF] Added fixes to build smartmontools on old Linux systems
3445: (libc < 6, Kernel 2.0.x).
3446:
3447: [BA] Added ATA minor version identity strings for latest ATA specification
3448: updates: ATA/ATAPI-7 T13 1532D revision 4a and ATA/ATAPI-6 published,
3449: ANSI INCITS 361-2002
3450:
3451: [PW] Added Hitachi Travelstar 5K80 family and Fujitsu MHTxxxxAH family to
3452: knowndrives table.
3453:
3454: [EM] Fix up compilation under FreeBSD < 5.x
3455:
3456: [PW] Added QUANTUM FIREBALL EX3.2A and missing Western Digital Caviar SE
3457: drives to knowndrives table.
3458:
3459: [BA] Modified Hitachi Travelstar 80GN family regexp in drive database.
3460: Thanks to [GK/CF] for problem & solution.
3461:
3462: [GK] Added os_darwin.[ch]
3463:
3464: [PW] Added the following drives to the knowndrives table: IBM Travelstar
3465: 48GH, 30GN, and 15GN family; IBM Deskstar 37GP and 34GXP family;
3466: Western Digital WDC WD272AA; Maxtor DiamondMax D540X-4D family;
3467: TOSHIBA MK2016GAP, MK2018GAP, MK2018GAS, MK2023GAS; and
3468: QUANTUM FIREBALL ST3.2A
3469:
3470: [BA] smartd/smarctl now print build HOST/OS information as part
3471: of startup slogan. This should make it slightly easier to
3472: read bug reports from users.
3473:
3474: [RZ] Fixed the DEVICESCAN to do what it was supposed to do - give
3475: error message unless scanning is in progress.
3476:
3477: [BA] Update documentation to describe 3ware character devices. Better
3478: error detection for missing/malfunctioning devices behind 3ware
3479: controllers. Now pack 3ware ioctl structures explicitly.
3480:
3481: [BA] For ATA devices that support LBA mode, print capacity as part
3482: of smartctl --info
3483:
3484: [RZ] Made DEVICESCAN quiet about non-existing devices unless debug
3485: is on.
3486:
3487: [DG] treat "unit attention" SCSI warning as try again in some contexts
3488: (test unit ready and mode sense)
3489:
3490: [BA] on drives that store max/min rather than min/max, get order
3491: correct in printing temp.
3492:
3493: [BA] fixed typo in 'smartctl -h' output. Thanks to Gabor Z. Papp.
3494:
3495: [BA] linux: clean-up to 3ware/AMCC support; dynamically create
3496: or fix /dev/tw[ae][0-15] device node entries if they don't
3497: exist or are incorrect. One can now use the character devices
3498: /dev/twe[0-15] OR /dev/sd? for 3ware 6000/7000/8000 series
3499: cards. One must use /dev/twa[0-15] for 3ware 9000 series cards.
3500: Note that selective self-tests now work via /dev/tw[ae] devices.
3501: Next step: documentation.
3502:
3503: [BA] linux: experimental "support" for 3ware/AMCC 9000 series
3504: controllers that use the 3w-9xxx driver. This will be in a
3505: state of flux for a few days. Note that this requires the
3506: character interface /dev/twa[0-15].
3507:
3508: [DG] linux: extend general SCSI OS interface to use the SG_IO ioctl. If
3509: not available, use the older SCSI_IOCTL_SEND_COMMAND ioctl.
3510:
3511: [KS] Solaris/x86: fixed system identification problem in configure
3512: script. Thanks to Stuart Swales.
3513:
3514: smartmontools 5.32
3515:
3516: [BA] Update link to revised/updated IBM Deskstar Firmware
3517:
3518: [CF] Cygwin & Windows: Added missing ASPI manager initialization
3519: with GetASPI32SupportInfo(). Thanks to Nikolai SAOUKH for pointing
3520: this out and providing a patch.
3521:
3522: [BA] modified smartd init script to work on whitebox (thanks to
3523: Michael Falzon)
3524:
3525: [BA] removed (reverted) additional Attribute definitions from
3526: http://smart.friko.pl/attributes.php. All (or most?) of these
3527: appear to be return code values for the WD Digital Life Guard Utility.
3528:
3529: [PW] Added Seagate Medalist 17242, 13032, 10232, 8422, and 4312 to
3530: knowndrives table. Added missing Seagate U Series 5 drives.
3531:
3532: [PW] Added the following QUANTUM models to knowndrives table:
3533: FIREBALL EX6.4A, FIREBALLP AS10.2, FIREBALLP AS40.0, FIREBALL CR4.3A,
3534: FIREBALLP LM15, FIREBALLP LM30, and FIREBALLlct20 30
3535:
3536: [PW] Added missing Western Digital Protege drives to knowndrives table.
3537:
3538: [PW] Added Maxtor DiamondMax 40 ATA 66 series and DiamondMax 40 VL Ultra
3539: ATA 100 series to knowndrives table.
3540:
3541: [PW] Added the following Hitachi/IBM drives to knowndrives table:
3542: HITACHI_DK14FA-20B, Travelstar 40GNX series, Travelstar 4LP series,
3543: and Travelstar DK23XXB series. Added the missing Travelstar 80GN
3544: drives.
3545:
3546: [PW] Added Fujitsu MPB series and MPG series to knowndrives table. Added
3547: the missing Fujitsu MHSxxxxAT drives.
3548:
3549: [KS] Solaris: added workaround for dynamic change of time-zone.
3550:
3551: [KS] Solaris: fixed problem that autogen.sh cannot detect absence of
3552: auto* tools.
3553:
3554: [BA] smartd: added time-zone bug information to man page.
3555: Reverted CF code for _WIN32 case.
3556:
3557: [CF] Cygwin & Windows: Added better error messages on IDE/ATA device
3558: open error.
3559:
3560: [BA] added additional Attribute definitions from
3561: http://smart.friko.pl/attributes.php
3562:
3563: [BA] smartd: reworked TimeZone bug workaround so it is only invoked
3564: for glibc. Note: this might not be right -- a similar bug may
3565: exist in other platform's libcs.
3566:
3567: [DG] SCSI smartmontools documentation updated [2004/5/6]. See:
3568: http://smartmontools.sourceforge.net/smartmontools_scsi.html
3569:
3570: [CF] Windows: Fixed reset of TZ=GMT in glibc timezone bug workaround.
3571:
3572: smartmontools 5.31
3573:
3574: [DG] move SCSI device temperature and start-stop log page output
3575: (smartctl) into --attributes section (was in --info section).
3576:
3577: [GG] change default installation location to /usr/local
3578:
3579: [CF] Cygwin smartd: Fixed crash on access of SCSI devices after fork().
3580:
3581: [PW] Added TOSHIBA MK4018GAS and the following Maxtor drive families
3582: to knowndrives table: DiamondMax D540X-4G, Fireball 541DX,
3583: DiamondMax 3400 Ultra ATA, DiamondMax Plus 6800 Ultra ATA 66.
3584:
3585: [PW] Added missing Maxtor DiamondMax 16, DiamondMax D540X-4K, and
3586: DiamondMax Plus 45 Ulta ATA 100 drives to knowndrives table.
3587:
3588: [PW] Added ExcelStor J240, Hitachi Travelstar 80GN family, Fujitsu
3589: MHTxxxxAT family, and IBM Deskstar 25GP and 22GXP families to
3590: knowndrives table.
3591:
3592: [CF] Cygwin smartd: Added workaround for missing SIGQUIT via keyboard:
3593: To exit smartd in debug mode, type CONTROL-C twice.
3594:
3595: [BA] smartctl: printing of the selective self-test log is now
3596: controlled by a new option: -l selective
3597:
3598: [BA] Added entries for Samsung firmware versions -25 to -39 based
3599: on latest info about firmware bug fixes.
3600:
3601: [PW] Added Seagate U Series X family, Seagate U8 family, and Seagate
3602: Medalist 8641 family to knowndrives table.
3603:
3604: [CF] smartd: Added exit values 5/6 for missing/unreadable config file.
3605:
3606: [BA] smartd: now monitor the Current Pending Sector count (Attribute 197)
3607: and the Offline Pending Sector Count (Attribute 198). Log a
3608: warning (and send an email, if so configured) if the raw count
3609: is nonzero. These are controlled by new Directives: -C and -U.
3610: Currently they are enabled by default.
3611:
3612: [CF] Added option -c FILE, --configfile=FILE to smartd to specify
3613: an alternate configuration FILE or '-' for standard input.
3614:
3615: [KS] configure.in now searches for -lnsl and -lsocket for Solaris.
3616:
3617: [CF] Win32/native smartd: Added thread to combine several syslog output
3618: lines into one single event log entry.
3619:
3620: [CF] Win32 smartd: Added DEVICESCAN for SCSI/ASPI devices.
3621:
3622: [GG] Use gethostbyname() the get the DNS domain since getdomainname()
3623: returns the NIS domain when sending mails from smartd.
3624:
3625: [GG] smartd.init.in: pass smartd_opts to smartd on startup, read distribution
3626: specific configuration files if found
3627:
3628: [SS] smartctl: added NetBSD support for Selective Self-tests.
3629:
3630: [BA] smartd.conf example configuration file now has all examples
3631: commented out except for 'DEVICESCAN'.
3632:
3633: [CF] Win32/native smartd: Added ability to display warning "emails"
3634: as message box by "-m msgbox" directive. With "-m sysmsgbox",
3635: a system modal (always on top) message box is shown.
3636:
3637: [BA] smartctl: printing of self-test log for disks that support
3638: Selective self-testing now shows the status of the (optional)
3639: read-scan after the selective self test. Also, changed format
3640: in printing self-test log to print failing LBA in base 10 not
3641: base 16 (more compatible with kernel error messages). Also,
3642: in printing SMART error log, print timestamps in format
3643: days+hours+minutes+seconds.
3644:
3645: [CF] Win32 smartd: Added ability to log to stdout/stderr
3646: (-l local1/2). Toggling debug console still works
3647: if stdout is redirected.
3648:
3649: [BA] smartctl: selective self-test log, print current status
3650: in a more detailed way. Allow writing of selective self-test
3651: log provided that no other self-test is underway.
3652:
3653: [BA] Linux: eliminated dependency on kernel tree hdreg.h.
3654:
3655: [BA] smartctl: -l selftest option now prints Selective self-test
3656: log in addition to the normal self-test log.
3657: Added additional options (-t pending, -t afterselect) to
3658: control remaining Selective Self-test capabilities. Tested
3659: with several Maxtor disks. Modified error message printing
3660: so that munged option messages print at the end not the
3661: start of output.
3662:
3663: [CF] Added daemon support to Win32 native version of smartd.
3664: The daemon can be controlled by commands similar to initd
3665: scripts: "smartd status|stop|reload|restart|sigusr1|sigusr2".
3666:
3667: [CF] Added minor support for option "-l local[0-7]" to Win32 native
3668: (not Cygwin) version of smartd. If specified, the log output
3669: is written to file "./smartd[1-7]?.log" instead of event log.
3670:
3671: [BA] Added Selective Self-test to smartctl (-t selective,M-N).
3672: Currently only supported under Linux; Solaris, NetBSD, FreeBSD
3673: and Windows developers must add WRITE LOG functionality to
3674: os_*.c
3675:
3676: [BA] Added workaround for an annoying glibc bug: if you change
3677: timezones, (eg, flying with a laptop from USA to Europe)
3678: localtime() does not notice this in a running
3679: executable, so time that appears in the system log (syslog!)
3680: will be incorrect. See
3681: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=48184
3682: for additional examples of this bug.
3683:
3684: [DG] Set explicit timeouts for SCSI commands (most default to 6 seconds).
3685: Previously a 0 second timeout was meant to be interpreted as a
3686: default timeout but the FreeBSD port had a problem in this area.
3687:
3688: [CF] Fixed un-thread-safe exit signal handler for Win32
3689:
3690: [BA] Fixed un-thread-safe exit signal handler pointed out
3691: by CF.
3692:
3693: [BA] Changed configure script to eliminate warnings under
3694: Solaris from sys/int_type.h conflicts with int64.h
3695: Added header files for umask to smartd.c.
3696:
3697: [BA] Man page format change from Werner LEMBERG. " " changed to \&
3698:
3699: [CF] Added os_win32/syslogevt.* event message file tool for Win32
3700: smartd (native+cygwin). May also be useful for other cygwin
3701: programs writing to syslog().
3702:
3703: [CF] Added Win32 version of smartd
3704:
3705: [CF] Merged RELEASE_5_26_WIN32_BRANCH
3706:
3707: [BA] Made some changes to man page markup suggested by
3708: Richard Verhoeven to work around bugs in man2html.
3709: Tested not to break anything under Linux and Solaris.
3710:
3711: [CF] Moved PrintOut() from utility.c to smart{ctl,d}.c to avoid
3712: syslog() output of smartctl.
3713:
3714: [BA] Grew worried that some time-zone names could be very long (eg,
3715: Mitteleuropaische Zeit) and put date string lengths into a
3716: single macro in utility.c
3717:
3718: [EM] Updated os_freebsd.c to handle older versions of FreeBSD in a
3719: more appropriate/obvious fashion.
3720:
3721: [EM] Modified autogen.sh as FreeBSD installs automake 1.7 as
3722: 'automake17' and NOT 'automake-1.7'
3723:
3724: smartmontools 5.30
3725:
3726: [PW] Added QUANTUM FIREBALLlct15 30, QUANTUM FIREBALLlct20 40, and
3727: Maxtor 6Y060P0 (DiamondMax Plus 9 60GB) to knowndrives table.
3728:
3729: [PW] Added Maxtor MaXLine II family to knowndrives table (thanks to
3730: Brett Russ for submitting the patch).
3731:
3732: [BA] Added remaining read/write commands to detailed list of
3733: error log commands that have text descriptions of problem
3734: printed. For commands that support it, print number of failed
3735: sectors at problem LBA.
3736:
3737: [BA] Made SuSE section of smartd init script more SuSE 9 compatible.
3738: Thanks to Hans-Peter Jansen.
3739:
3740: [CF] Windows smartd: Added IDE/ATA device scan
3741: Added windows device names to smartctl.8.in, smartd.8.in
3742:
3743: [BA] smartctl/smartd: user-provided '-F samsung' and '-F samsung2'
3744: command line options/Directives did NOT over-ride preset values
3745: unless user specified '-P ignore'. Now they will always over-ride
3746: preset values from the database.
3747:
3748: [BA] Added error decoding for a few more READ and WRITE commands.
3749:
3750: [PW] Added Maxtor MaXLine Plus II, Western Digital Caviar SE (Serial ATA)
3751: series, Hitachi Deskstar 7K250 series, and Ultra ATA 66 models of
3752: the Maxtor DiamondMax Plus 40 series to knowndrives table.
3753:
3754: [BA] Added Maxtor Diamondmax 250 GB drives to database. Note that
3755: these model numbers are not listed in Maxtor documentation, but
3756: they exist.
3757:
3758: [BA] Removed the 'contact developers' phrase from the Samsung disk
3759: warning messages.
3760:
3761: [PW] Added TOSHIBA MK2017GAP, IBM Deskstar 14GXP and 16GP series,
3762: Fujitsu MPC series, Seagate Barracuda ATA III family, and missing
3763: Seagate Barracuda U Series drives to knowndrives table
3764:
3765: [BA] smartd: wrong loglevel for message: Configuration file
3766: /etc/smartd.conf parsed. Changed to LOG_INFO from LOG_CRIT.
3767: Thanks to Emmanuel CHANTREAU for the report.
3768:
3769: [CF] Checked in development version of windows code base.
3770:
3771: smartmontools 5.29 (note: there was NO 5.28 release)
3772:
3773: [BA] smartd: configure script did not set correct directory to search for
3774: smartd.conf based on --prefix argument to ./configure. Thanks to
3775: GG for identifying the problem and fix.
3776:
3777: [BA] make clean now removes man pages (generated from *.in) files as well
3778: as object files.
3779:
3780: [EM] Correct copying of sense data in FreeBSD SCSI implementation. Thanks
3781: to Sergey Svishchev for noticing the bug.
3782:
3783: [BA] On solaris, wrong warning message if no ATA support. Warning message
3784: concerns 3ware controller, not ATA.
3785:
3786: [SS] Added SCSI support for NetBSD.
3787:
3788: [BA] on big-endian linux machines, fixed interpretation of HDIO_GET_IDENTITY
3789: to correctly identify ATAPI bit (was byte swapped). This should
3790: eliminate some SYSLOG noise if user queries a packet device (eg, CD
3791: ROM or DVD reader).
3792:
3793: [PW] Removed warning for IBM Deskstar 40GV & 75GXP series drives with
3794: A5AA/A6AA firmware. Thanks to Gerald Schnabel.
3795:
3796: [PW] Added Toshiba TOS MK3019GAXB SUN30G to knowndrives table
3797:
3798: [PW] Added Western Digital Caviar AC12500, AC24300, AC25100, AC36400,
3799: and AC38400 to knowndrives table
3800:
3801: [BA] When printing ATA error log, print the LBA at which READ
3802: or WRITE commands failed.
3803:
3804: [BA] Changed syntax of error message in smartctl
3805:
3806: [BA] Added versioning info (-V options to smartd/smartctl) for
3807: Solaris ATA module.
3808:
3809: smartmontools 5.27
3810:
3811: [KS] Added ATA/IDE support for Solaris/SPARC (ATA/IDE not yet for
3812: Solaris/x86).
3813:
3814: [BA] 3ware controllers: documented that one can monitor any of the
3815: physical disks from any of the 3ware /dev/sd? logical devices.
3816: Better warnings if querying a disk that does not exist.
3817:
3818: [PW] Added Hitachi Travelstar DK23DA series, Maxtor DiamondMax Plus 40
3819: series, Western Digital Caviar WDxxxAA, WDxxxBA, and WDxxxAB series
3820: to knowndrives table
3821:
3822: [BA] missing 'pragma pack' on ATA IDENTIFY DEVICE structure may have
3823: caused odd or incorrect results on 64-bit machines.
3824:
3825: [BA] smartctl/smartd allow inspection of self-test and error logs even
3826: if disk firmware claims that these don't exist. This is needed
3827: for some Maxtor disks whose firmware does not indicate log support
3828: even though the disk DOES support it.
3829:
3830: [BA] Improved porting instructions and documentation in os_generic.c
3831:
3832: [PW] Add Western Digital Caviar WD136AA and SAMSUNG SP40A2H (RR100-07
3833: firmware) to knowndrives table.
3834:
3835: [EM] FreeBSD: remove extra definition of FreeNonZero
3836:
3837: [BA] smartctl: the -q silent option was printing output for some
3838: error conditions. Fixed. Will rename relevant variables to help
3839: avoid these errors in the future.
3840:
3841: [SS] NetBSD port added.
3842:
3843: [BA] more sensible error messages for devfs and devfs-like systems.
3844: Instead of saying that the DIRECTORY does not exist, say that
3845: the DEVICE does not exist.
3846:
3847: [BA] smartd: added -n Directive, to prevent disk spin-up depending
3848: upon the power mode (SLEEP, STANDBY, or IDLE).
3849:
3850: [PW] Added Maxtor DiamondMax 20 VL series, Fujitsu MPF series,
3851: Maxtor DiamondMax 36 series, Maxtor DiamondMax 4320 series, and
3852: Maxtor DiamondMax 536DX series to knowndrives table.
3853:
3854: [BA] many warning messages now give the file name AND VERSION
3855:
3856: [BA] smartd: when the user provides multiple address recipients
3857: to the '-m' Directive in a comma-delineated list, the commas
3858: are stripped out before passing the list of addresses to the
3859: mailer program. (Thanks to Calin A. Culianu for pointing this out
3860: and providing a patch.)
3861:
3862: [BA] smartd: when the '-M exec path' Directive is used, any stdout OR
3863: stderr output from the executable "path" is assumed to indicate a
3864: problem, and is echoed to SYSLOG.
3865:
3866: [BA] Added all missing IBM/Hitachi Deskstar 180GXP models to knowndrives
3867: table.
3868:
3869: [PW] Added some missing IBM/Hitachi Deskstar 120GXP models to knowndrives
3870: table.
3871:
3872: [PW] Added IBM Travelstar 14GS to knowndrives table.
3873:
3874: [PW] Modified knowndrives table to match entire Hitachi Travelstar
3875: DK23BA and DK23EA series of drives (thanks to Norikatsu Shigemura
3876: for submitting the patch).
3877:
3878: [PW] Added some missing Fujitsu MPE series drives to knowndrives table.
3879:
3880: [PW] Added TOSHIBA MK4019GAX, TOSHIBA MK6409MAV, and QUANTUM
3881: FIREBALLlct15 20 to knowndrives table.
3882:
3883: [EM] Fixup example command output for FreeBSD
3884:
3885: [PW] Added Maxtor DiamondMax 80 family to knowndrives table.
3886:
3887: [EM] Catch up FreeBSD code to switch PROJECTHOME to PACKAGE_HOMEPAGE
3888: macros.
3889:
3890: [BA] smartd: now watches stdout/stderr when trying to run mail, mailx
3891: or mail warning script, and reports any output to SYSLOG. This
3892: gives a clearer error message if something is wrong.
3893:
3894: [BA] smartd: Solaris init script modified to accomodate grep that
3895: lacks '-q' quiet option. Also check for running process to kill
3896: on stop.
3897:
3898: [PW] Added some missing Seagate Barracuda 7200.7 and 7200.7 Plus drives
3899: to knowndrives table.
3900:
3901: [PW] Added Maxtor DiamondMax Plus 60 family and Seagate U Series 5 20413
3902: to knowndrives table.
3903:
3904: [BA] smartd: under Solaris, made default mailer be 'mailx' not
3905: 'mail', since Solaris 'mail' does not accept a '-s' argument.
3906: A workaround for Solaris users of earlier versions is to
3907: have '-M exec /bin/mailx' in their smartd.conf config file.
3908:
3909: [DG] some SCSI controllers don't like odd length transfers so make
3910: sure LOG SENSE transfers are rounded up to an even number when
3911: and odd length is reported (i.e. there is a double fetch, the
3912: first to find the length, the second gets the data)
3913:
3914: [BA] smartd man pages: under Solaris, correct section numbers in the
3915: 'See also' section.
3916:
3917: [KS/BA] smartd man page: describe how to set Solaris syslog.conf
3918: file to catch all messages. Give correct Solaris SYSLOG default
3919: path /var/adm/messages in man pages.
3920:
3921: [BA] smartd: incorporated Debian startup script submitted by user.
3922:
3923: [BA] smartctl: modified printing of self-test log entry number. Seagate
3924: firmware can leave 'holes' in the self-test log while a test is
3925: actually running. We now print entry numbers consistently in this
3926: case, not assuming that entries are contiguous.
3927:
3928: [PW] Added QUANTUM FIREBALL CX10.2A and Western Digital Caviar AC23200L
3929: to knowndrives table.
3930:
3931: [PW] Added QUANTUM FIREBALLlct20 20 to knowndrives table.
3932:
3933: [PW] Added Maxtor DiamondMax Plus D740X family to knowndrives table.
3934:
3935: [PW] Added IBM Travelstar 32GH, 30GT, and 20GN family to knowndrives
3936: table.
3937:
3938: [BA] Slackware init script modified to search for /etc/slackware-version
3939: rather than /etc/slackware-release.
3940:
3941: [PW] Added Seagate Barracuda ATA II family and TOSHIBA MK4019GAXB to
3942: knowndrives table.
3943:
3944: [GG] explain howto use autoreconf in autogen.sh
3945:
3946: [KS] Makefile.am/configure.in: changed manual page sections for
3947: Solaris.
3948:
3949: [BA] smartd: reduced number of scheduled self-test messages if
3950: test already run in current hour.
3951:
3952: [PW] Added Maxtor DiamondMax Plus 8 family to knowndrives table.
3953:
3954: [BA] linux: check for linux/hdreg.h. If it's there, use it. If
3955: not, provide the necessary definitions ourselves.
3956:
3957: [PW] Removed warning for IBM Deskstar 40GV & 75GXP series drives
3958: with TXAOA5AA firmware
3959:
3960: [PW] Added IBM Travelstar 25GS, 18GT, and 12GN family to knowndrives
3961: table.
3962:
3963: [PW] Added IBM/Hitachi Travelstar 60GH & 40GN family to knowndrives
3964: table.
3965:
3966: [BA] smartd: made '-s' Directive more efficient. Now store
3967: compiled regex, and re-use. If device lacks certain self-test
3968: capabilities, track it and don't try again.
3969:
3970: [BA] smartd: made memory allocation for device lists completely
3971: dynamic (eliminating compile-time maximum length constants).
3972:
3973: [PW] Removed warning for SAMSUNG SP0802N with TK100-23 firmware
3974:
3975: [PW] Added Seagate Barracuda ATA IV family to knowndrives table.
3976:
3977: [BA] smartd: reduce per-device memory footprint by making
3978: mail-warning info dynamically allocated. Also remove
3979: potential memory leak if use has -m Directive twice and
3980: keeps reloading the config file (highly unlikely this would
3981: ever be noticed!)
3982:
3983: [DG] smartd: added SCSI scheduled self-tests (Background
3984: short or extended).
3985:
3986: [BA] smartd: can now run scheduled offline immediate and
3987: self-tests. See man page and -s Directive for details.
3988:
3989: [GG] don't include manpages in make-dist-tarball.
3990:
3991: [BA] smartctl: on-line examples given with -h are now correct
3992: for solaris and linux, but wrong for freebsd. Ed?
3993:
3994: [BA] smartd: man page now explains device scanning for solaris as
3995: well as linux and freebsd.
3996:
3997: [BA] smartd/smartctl: man pages now report correct CVS tag release
3998: date, and executables '-V' options reports more build info.
3999:
4000: smartmontools 5.26
4001:
4002: [BA] Improved user messages that appear from 'make install'
4003:
4004: [PW] Removed warning for SAMSUNG SP1213N with firmware TL100-23
4005:
4006: [BA] incorporated SuSE init script from user.
4007:
4008: [DG] if SCSI device is read only, then open it read only.
4009:
4010: [BA] when compiled on non-supported system (NOT linux, freebsd or solaris) then
4011: the run-time error messages now clearly say 'your system is not supported'
4012: and give clear directions.
4013:
4014: [BA] ./configure script now works correctly on SuSE linux boxes
4015:
4016: [BA] minor improvements to man pages
4017:
4018: [BA] simplified detection of packet (ATAPI, CD) devices.
4019:
4020: [BA] init script (redhat, mandrake, yellowdog) now uses correct
4021: strings for translation and is slightly more standard.
4022:
4023: [DG] smartctl: output scsi Seagate vendor pages for disks (not tapes)
4024:
4025: smartmontools 5.25
4026:
4027: Note: there was no '5.24' release. From this point on, even numbered
4028: releases will be 'stable' ones and odd numbered releases will be
4029: unstable/testing/development ones.
4030:
4031: [DG] smartd/smartctl: changed scsiClearControlGLTSD() to
4032: scsiSetControlGLTSD() with an 'enabled' argument so '-S on'
4033: and '-S off' work for SCSI devices (if changing GLTSD supported).
4034:
4035: [BA] smartd/smartctl: wired in scsiClearControlGLTSD(). Could still
4036: use a corresponding Set function. Left stubs for this purpose.
4037:
4038: [DG] scsicmds: added scsiClearControlGLTSD() [still to be wired in]
4039:
4040: [BA] smartctl: make SCSI -T options behave the same way as the
4041: ATA ones.
4042:
4043: [DG] smartctl: output scsi transport protocol if available
4044:
4045: [DG] scsi: stop device scan in smartd and smartctl if badly formed
4046: mode response [heuristic to filter out USB devices before we
4047: (potentially) lock them up].
4048:
4049: [BA] smartd: deviceclose()->CloseDevice(). Got rid of SCSIDEVELOPMENT
4050: macro-enabled code. Added -W to list of gcc specific options to
4051: always enable. Made code clean for -W warnings.
4052:
4053: [PW] Added Maxtor DiamondMax VL 30 family to knowndrives table.
4054:
4055: [DG] scsi: add warning (when '-l error' active) if Control mode page
4056: GLTSD bit is set (global disable of saving log counters)
4057:
4058: [DG] scsi: remember mode sense cmd length. Output trip temperature
4059: from IE lpage (IBM extension) when unavailable from temp lpage.
4060:
4061: [BA] smartd: for both SCSI and ATA now warns user if either
4062: the number of self-test errors OR timestamp of most
4063: recent self-test error have increased.
4064:
4065: [DG] smartctl: output Seagate scsi Cache and Factory log pages (if
4066: available) when vendor attributes chosen
4067:
4068: [DG] smartd: add scsiCountFailedSelfTests() function.
4069:
4070: [DG] Do more sanity checking of scsi log page responses.
4071:
4072: [BA] smartd: now warns user if number of self-test errors has
4073: increased for SCSI devices.
4074:
4075: [BA] smartd: warn user if number of ATA self-test errors increases
4076: (as before) OR if hour time stamp of most recent self-test
4077: error changes.
4078:
4079: [DG] More checks for well formed mode page responses. This has the side
4080: effect of stopping scans on bad SCSI implementations (e.g. some
4081: USB disks) prior to sending commands (typically log sense) that
4082: locks them up.
4083:
4084: [PW] Added Western Digital Caviar family and Caviar SE family to
4085: knowndrives table.
4086:
4087: [BA] smartd: added -l daemon (which is the default value if -l
4088: is not used).
4089:
4090: [PW] Added Seagate Barracuda ATA V family to knowndrives table.
4091:
4092: [BA] smartd: added additional command line argument -l FACILITY
4093: or --logfacility FACILITY. This can be used to redirect
4094: messages from smartd to a different file than the one used
4095: by other system daemons.
4096:
4097: [PW] Added Seagate Barracuda 7200.7, Western Digital Protege WD400EB,
4098: and Western Digital Caviar AC38400 to knowndrives table.
4099:
4100: [BA] smartd: scanning should now also work correctly for
4101: devfs WITHOUT traditional links /dev/hd[a-t] or /dev/sd[a-z].
4102:
4103: [PW] Added Maxtor 4W040H3, Seagate Barracuda 7200.7 Plus,
4104: IBM Deskstar 120GXP (40GB), Seagate U Series 20410,
4105: Fujitsu MHM2100AT, MHL2300AT, MHM2150AT, and IBM-DARA-212000
4106: to knowndrives table.
4107:
4108: [PW] Added remaining Maxtor DiamondMax Plus 9 models to knowndrives
4109: table.
4110:
4111: [EM] smartd: If no matches found, then return 0, rather than an error
4112: indication, as it just means no devices of the given type exist.
4113: Adjust FreeBSD scan code to mirror Linux version.
4114:
4115: [BA] smartd: made device scan code simpler and more robust. If
4116: too many devices detected, warn user but scan as many
4117: as possible. If error in scanning, warn user but don't
4118: die right away.
4119:
4120: [EM] smartd: To keep as consistent as possible, migrate FreeBSD
4121: devicescan code to also use glob(3). Also verified clean
4122: compile on a 4.7 FreeBSD system.
4123:
4124: [BA] smartd: Modified device scan code to use glob(3). Previously
4125: it appeared to have trouble when scanning devices on an XFS
4126: file system, and used non-public interface to directory
4127: entries. Problems were also reported when /dev/ was on an
4128: ext2/3 file system, but there was a JFS partition on the same
4129: disk.
4130:
4131: [BA] Clearer error messages when device scanning finds no suitable
4132: devices.
4133:
4134: [EM] FreeBSD: Fixup code to allow for proper compilation under
4135: -STABLE branch.
4136:
4137: smartmontools 5.23
4138:
4139: [BA] smartd: didn't close file descriptors of ATA packet devices
4140: that are scanned. Fixed.
4141:
4142: [BA] Added reload/report targets to the smartmontools init script.
4143: reload: reloads config file
4144: report: send SIGUSR1 to check devices now
4145:
4146: smartmontools 5.22
4147:
4148: [EM] Fix compile issues for FreeBSD < 5-CURRENT.
4149:
4150: [PW] Added Fujitsu MHM2200AT to knowndrives table.
4151:
4152: [BA] To help catch bugs, clear ATA error structures before all
4153: ioctl calls. Disable code that attempted to time-out on SCSI
4154: devices when they hung (doesn't work).
4155:
4156: [BA] Documented STATUS/ERROR flags added by [PW] below.
4157:
4158: [BA] Improved algorithm to recognize ATA packet devices. Should
4159: no longer generate SYSLOG kernel noise when user tries either
4160: smartd or smartctl on packet device (CD-ROM or DVD). Clearer
4161: warning messages from smartd when scanning ATA packet device.
4162:
4163: [PW] Added TOSHIBA MK4025GAS to knowndrives table.
4164:
4165: [PW] Added a textual interpretation of the status and error registers
4166: in the SMART error log (ATA). The interpretation is
4167: command-dependent and currently only eight commands are supported
4168: (those which produced errors in the error logs that I happen to
4169: have seen).
4170:
4171: [BA] added memory allocation tracking to solaris code.
4172: Fixed solaris signal handling (reset handler to default
4173: after first call to handler) by using sigset. Added
4174: HAVE_SIGSET to configure.in
4175:
4176: [CD] solaris port: added SCSI functionality to solaris
4177: stubs.
4178:
4179: [BA] smartd: attempt to address bug report about smartd
4180: hanging on USB devices when scanning:
4181: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=107615
4182: Set a timeout of SCSITIMEOUT (nominally 7 seconds) before
4183: giving up.
4184:
4185: [EM] smartd: DEVICESCAN will follow links in a devfs filesystem and
4186: make sure the end point is a disc. Update documentation, added
4187: note about FreeBSD scanning
4188:
4189: [BA] smartd: DEVICESCAN also looks for block devices in
4190: /dev. Updated documentation. Now scans for up to
4191: 20 ATA devices /dev/hda-t rather than previous 12
4192: /dev/hda-l.
4193:
4194: [EM] smartd: mirror the FreeBSD DEVICESCAN logic for Linux,
4195: so that smartd now scans only devices found in /dev/. Also,
4196: make utility memory functions take a line number and file so
4197: that we report errors with the correct location.
4198:
4199: [GG] add a note about Debian bug #208964 to WARNINGS.
4200:
4201: [BA] smartctl: -T verypermissive option broken. Use
4202: -T verpermissive until the next release, please.
4203:
4204: [BA] Syntax mods so that code also compiles on Solaris using
4205: Sun Workshop compiler. Need -xmemalign 1i -xCC flags
4206: for cc.
4207:
4208: smartmontools 5.21
4209:
4210: [DK] Changed configure.in so -Wall is only included if gcc
4211: is used (this is a gcc specific flag) and -fsignedchar
4212: is not used at all (this is a gcc specific compiler
4213: flag).
4214:
4215: [BA] Modifications so that code now compiles under solaris. Now
4216: all that's needed (:-) is to fill in os_solaris.[hc]. Added
4217: os_generic.[hc] as guide to future ports. Fixed -D option
4218: of smartd (no file name). Modified -h opt of smartd/smartctl
4219: to work properly with solaris getopt().
4220:
4221: [EM] Update MAN pages with notes that 3ware drives are NOT supported
4222: under FreeBSD. Cleanup FreeBSD warning message handling.
4223:
4224: [EM] FreeBSD only: Fix first user found bug....I guess I was making
4225: the wrong assumption on how to convert ATA devnames to
4226: channel/unit numbers.
4227:
4228: [EM] Allow for option --enable-sample to append '.sample' to installed
4229: smartd.conf and rc script files. Also, let rc script shell setting
4230: be determined by configure
4231:
4232: [EM] Minor autoconf update to include -lcam for FreeBSD
4233:
4234: [EM] Add conditional logic to allow FreeBSD to compile pre-ATAng.
4235: -- note, not tested
4236: Add some documentation to INSTALL for FreeBSD.
4237:
4238: [EM] Implement SCSI CAM support for FreeBSD. NOTE: I am not an expert
4239: in the use of CAM. It seems to work for me, but I may be doing
4240: something horribly wrong, so please exercise caution.
4241:
4242: [EM] Switch over to using 'atexit' rather than 'on_exit' routine. This also
4243: meant we needed to save the exit status elsewhere so our 'Goodbye'
4244: routine could examine it.
4245:
4246: [EM] Move the DEVICESCAN code to os specific files. Also moved some of the
4247: smartd Memory functions to utility.c to make available to smartctl.
4248:
4249: [EM] Code janitor work on os_freebsd.c.
4250:
4251: [EM] Added os_freebsd.[hc] code. Additional code janitor
4252: work.
4253:
4254: [BA] Code janitor working, moving OS dependent code into
4255: os_linux.[hc].
4256:
4257: [GG] conditionally compile os_{freebsd,linux}.o depending on
4258: host architecture
4259:
4260: [PW] Print estimated completion time for tests
4261:
4262: [BA] Added -F samsung2 flag to correct firmware byte swap.
4263: All samsung drives with *-23 firmware revision string.
4264:
4265: smartmontools 5.20
4266:
4267: [GG] Fixed broken Makefile.am (zero length smartd.conf.5
4268: was being created), fix broken uninstall/distcheck targets
4269:
4270: [FM] Improved Slackware init script added to /etc/smartd.initd
4271:
4272: smartmontools 5.19 [NOTE CHANGE OF RELEASE NUMBERING]
4273:
4274: [BA] smartctl: added '-T verypermissive' option which is
4275: equivalent to giving '-T permissive' many times.
4276:
4277: [BA] Try harder to identify from IDENTIFY DEVICE structure
4278: if SMART supported/enabled. smartd now does a more
4279: thorough job of trying to assess this before sending
4280: a SMART status command to find out for sure.
4281:
4282: [BA] smartctl: it's now possible to override the program's
4283: guess of the device type (ATA or SCSI) with -d option.
4284:
4285: [BA] try hard to avoid sending IDENTIFY DEVICE to packet
4286: devices (CDROMS). They can't do SMART, and this generates
4287: annoying syslog messages. At the same time, identify type
4288: of Packet device.
4289:
4290: [BA] smartctl: Can now use permissive option more
4291: than once, to control how far to go before giving up.
4292:
4293: [BA] smartd: if user asked to monitor either error or self-test
4294: logs (-l error or -l selftest) WITHOUT monitoring any of the
4295: Attribute values, code will SEGV. For 5.1-18 and earlier,
4296: a good workaround is to enable Auto offline (-o on).
4297:
4298: [BA] smartctl: If enable auto offline command given, update auto
4299: offline status before printing capabilities.
4300:
4301: [GG] Make autotools build the default, remove autotools.diff
4302:
4303: [GG] Add auto{conf,make} support, not enabled by default.
4304:
4305: [BA] Eliminated #include <linux/hdreg.h> from code. This
4306: should simplify porting to solaris, FreeBSD, etc. The
4307: only linux-specific code is now isolated to three routines,
4308: one for SCSI, one for Escalade, one for ATA.
4309:
4310: smartmontools 5.1-18
4311:
4312: [BA] smartd: fixed serious bug - Attributes not monitored unless
4313: user told smartd to ignore at least one of them!
4314:
4315: smartmontools 5.1-17
4316:
4317: [BA] Default runlevels for smartd changed from 3 and 5 to
4318: 2, 3, 4, and 5.
4319:
4320: [BA] Removed as much dynamic memory allocation as possible from
4321: configuration file parsing. Reloading config file, even in
4322: presence of syntax errors etc. should not cause memory leaks.
4323:
4324: [PW] It is no longer permissible for the integer part (if any) of
4325: arguments to --report and --device to be followed by non-digits.
4326: For example, the "foo" in --report=ioctl,2foo was previously
4327: ignored, but now causes an error.
4328:
4329: [BA] smartd: added -q/--quit command line option to specify
4330: under what circumstances smartd should exit. The old
4331: -c/--checkonce option is now obsoleted by this more
4332: general-purpose option.
4333:
4334: [BA] smartd now responds to a HUP signal by re-reading its
4335: configuration file /etc/smartd.conf. If there are
4336: errors in this file, then the configuration file is
4337: ignored and smartd continues to monitor the devices that
4338: it was monitoring prior to receiving the HUP signal.
4339:
4340: [BA] Now correctly get SMART status from disks behind 3ware
4341: controllers, thanks to Adam Radford. Need 3w-xxxx driver
4342: version 1.02.00.037 or later. Previously the smartmontools
4343: SMART status always returned "OK" for 3ware controllers.
4344:
4345: [BA] Additional work on dynamic memory allocation/deallocation.
4346: This should have no effect on smartctl, but clears that way
4347: for smartd to dynamically add and remove entries. It should
4348: also now be easier to modify smartd to re-read its config
4349: file on HUP (which is easy) without leaking memory (which is
4350: harder). The philosophy is that memory for data structures in
4351: smartd is now allocated only on demand, the first time it
4352: is needed.
4353:
4354: [BA] smartd: finished cleanup. Now use create/rm functions for
4355: cfgentries and dynamic memory allocation almost everywhere.
4356: Philosophy: aggresively try and provoke SEGV to help find
4357: bad code.
4358:
4359: [BA] Added SAMSUNG SV0412H to knowndrives table.
4360:
4361: [BA] smartd: if DEVICESCAN used then knowndrives table might not set
4362: the -v attributes correctly -- may have been the same for all
4363: the drives. Cleaned up some data structures and memory
4364: allocation to try and ensure segvs if such problems are
4365: introduced again.
4366:
4367: [BA] Now allow -S on and -o on for the 3ware device type. For these
4368: commands to be passed through, the stock 3ware 3w-xxxx driver
4369: must be patched (8 lines). I'll post a patch on the smartmontools
4370: home page after it's been tested by a few other people and 3ware
4371: have had a chance to look it over.
4372:
4373: smartmontools-5.1-16
4374:
4375: [BA] smartd - can now monitor ATA drives behind 3ware controllers.
4376:
4377: [BA] smartd - changed some FATAL out of memory error messages from
4378: syslog level LOG_INFO to LOG_CRIT.
4379:
4380: [BA] smartctl - added code to look at ATA drives behind 3ware RAID
4381: controllers using the 3w-xxxx driver. Note that for technical
4382: reasons related to the 3w-xxxx driver, the "Enable Autosave",
4383: "Enable Automatic Offline" commands are not implemented.
4384: I will add this to smartd shortly.
4385:
4386: [BA] smartd - modified sleep loop, so that smartd no longer comes
4387: on the run queue every second. Instead, unless interrupted,
4388: it sleeps until the next polling time, when it wakes up. Now
4389: smartd also tries to wake up at exactly the right
4390: intervals (nominally 30 min) even if the user has been sending
4391: signals to it.
4392:
4393: [GG] add Fujitsu MHN2300AT to vendoropts_9_seconds.
4394:
4395: [EB] Fujitsu change in knowndrives ... match the whole MPD and
4396: MPE series for vendoropts_9_seconds.
4397:
4398: [BA] smartd bug, might cause segv if a device can not be opened. Was
4399: due to missing comma in char* list. Consequence is that email
4400: failure messages might have had the wrong Subject: heading for
4401: errorcount, FAILEDhealthcheck, FAILEDreadsmartdata, FAILEDreadsmarterrorlog,
4402: FAILEDreadsmartsefltestlog, FAILEDopendevice were all displaced by
4403: one. And FAILEDopendevice might have caused a segv if -m was being
4404: used as a smartd Directive.
4405:
4406: smartmontools-5.1-15
4407:
4408: [BA] Cleaned up smartmontools.spec so that upgrading, removing
4409: and other such operations correctly preserve running behavior
4410: and booting behavior of smartd.
4411:
4412: [BA] Improved formatting of ATA Error Log printout, and added
4413: listing of names of commands that caused the error. Added
4414: obsolete ATA-4 SMART feature commands to table, along with
4415: obsolete SFF-8035i SMART feature command.
4416:
4417: [PW] Added atacmdnames.[hc], which turn command register &
4418: feature register pairs into ATA command names.
4419:
4420: [BA] Added conveyance self-test. Some code added for selective
4421: self-tests, but #ifdefed out.
4422:
4423: [BA] Modified smartd exit status and log levels. If smartd is
4424: "cleanly" terminated, for example with SIGTERM, then its
4425: exit messages are now logged at LOG_INFO not LOG_CRIT
4426:
4427: [BA] Added Attribute IDs (Fujitsu) 0xCA - 0xCE. This is decimal
4428: 202-206. Added -v switches for interpretation of Attributes
4429: 192, 198 and 201.
4430:
4431: [BA] Made smartmontools work with any endian order machine for:
4432: - SMART selftest log
4433: - SMART ATA error log
4434: - SMART Attributes values
4435: - SMART Attributes thesholds
4436: - IDENTIFY DEVICE information
4437: - LOG DIRECTORY
4438: Smartmontools is now free of endian bias and works correctly
4439: on both little- and big-endian hardware. This has been tested by
4440: three independent PPC users on a variety of ATA and SCSI hardware.
4441:
4442: [DG] Check that certain SCSI command responses are well formed. If
4443: IEC mode page response is not well formed exit smartctl. This
4444: is to protect aacraid. smartd should ignore a aacraid device.
4445:
4446: smartmontools-5.1-14
4447:
4448: [BA] smartctl: added column to -A output to show if Attributes are
4449: updated only during off-line testing or also during normal
4450: operation.
4451:
4452: smartmontools-5.1-13
4453:
4454: [BA] smartd: attempt to enable/disable automatic offline testing even
4455: if the disk appears not to support it. Now the same logic
4456: as smartctl.
4457:
4458: [BA] Added definition of Attribute 201, soft read error rate.
4459:
4460: [BA] Added IBM/Hitachi IC35L120AVV207-1 (GXP-180) and corresponding
4461: 8MB Cache GXP-120 to drive database.
4462:
4463: [BA] smartd: if DEVICESCAN Directive used in smartd.conf, and
4464: -I, -R or -r Directives used in conjunction with this, got
4465: segv errors. Fixed by correcting memory allocation calls.
4466:
4467: [BA] smartd: enable automatic offline testing was broken due
4468: to cut-and-paste error that disabled it instead of
4469: enabling it. Thanks to Maciej W. Rozycki for pointing
4470: out the problem and solution.
4471:
4472: [BA] Fixed "spelling" of some Attribute names to replace spaces
4473: in names by underscores. (Fixed field width easier for awk
4474: style parsing.)
4475:
4476: [BA,GF] Added mods submitted by [GF] to support Attribute 193 being
4477: load/unload cycles. Add -v 193,loadunload option, useful for
4478: Hitachi drive DK23EA-30, and add this drive to knowndrive.c
4479: Add meaning of attribute 250 : Read error retry rate
4480:
4481: smartmontools-5.1-12
4482:
4483: [BA] Added another entry for Samsung drives to knowndrive table.
4484:
4485: [DG] Refine SCSI log sense command to do a double fetch in most cases
4486: (but not for the TapeAlert log page). Fix TapeAlert and Self Test
4487: log page response truncation.
4488:
4489: [PW] Added 'removable' argument to -d Directive for smartd. This indicates
4490: that smartd should continue (rather than exit) if the device does not
4491: appear to be present.
4492:
4493: [BA] Modified smartmontools.spec [Man pages location] and
4494: smartd.initd [Extra space kills chkconfig!] for Redhat 6.x
4495: compatibility (thanks to Gerald Schnabel).
4496:
4497: smartmontools-5.1-11
4498:
4499: [EB] Add another Fujitsu disk to knowndrives.c
4500:
4501: [GG] match for scsi/ and ide/ in case of devfs to exclude false postives
4502:
4503: [BA] If SCSI device listed in /etc/smartd.conf fails to open or do
4504: SMART stuff correctly, or not enough space
4505: to list all SCSI devices, fail with error unless
4506: -DSCSIDEVELOPMENT set during compile-time.
4507:
4508: [BA] Added automatic recognition of /dev/i* (example: /dev/ide/...)
4509: as an ATA device.
4510:
4511: [DG] Add "Device type: [disk | tape | medium changer | ...] line to
4512: smartctl -i output for SCSI devices.
4513:
4514: [PW] Fixed bug in smartd where test email would be sent regularly (for
4515: example, daily if the user had specified -M daily) instead of just
4516: once on startup.
4517:
4518: [KM] More TapeAlert work. Added translations for media changer
4519: alerts. TapeAlert support reported according to the log page
4520: presence. ModeSense not attempted for non-ready tapes (all
4521: drives do not support this after all). Get peripheral type from
4522: Inquiry even if drive info is not printed. Add QUIETON()
4523: QUIETOFF() to TapeAlert log check.
4524:
4525: [BA] Stupid bug in atacmds.c minor_str[] affected ataVersionInfo().
4526: Two missing commas meant that minor_str[] had two few elements,
4527: leading to output like this:
4528: Device Model: Maxtor 6Y120L0
4529: Serial Number: Y40BF74E
4530: Firmware Version: YAR41VW0
4531: Device is: Not in smartctl database [for details use: -P showall]
4532: ATA Version is: 7
4533: ATA Standard is: 9,minutes
4534: ^^^^^^^^^
4535: Missing commas inserted.
4536:
4537: [BA] Fixed smartd bug. On device registration, if ATA device did
4538: not support SMART error or self-test logs but user had asked to
4539: monitor them, an attempt would be made to read them anyway,
4540: possibly generating "Drive Seek" errors. We now check that
4541: the self-test and error logs are supported before trying to
4542: access them the first time.
4543:
4544: [GG/BA] Fixed bug where if SMART ATA error log not supported,
4545: command was tried anyway. Changed some error printing to use
4546: print handlers.
4547:
4548: [GG] Makefile modifications to ease packaging
4549:
4550: [DG] Did work for TapeAlerts (SCSI). Now can detect /dev/nst0 as a
4551: SCSI device. Also open SCSI devices O_NONBLOCK so they don't
4552: hang on open awaiting media. The ATA side should worry about
4553: this also: during a DEVICESCAN a cd/dvd device without media
4554: will hang. Added some TapeAlert code suggested by Kai Makisara.
4555:
4556: smartmontools-5.1-10
4557:
4558: [PW] Extended the -F option/Directive to potentially fix other firmware
4559: bugs in addition to the Samsung byte-order bug. Long option name is
4560: now --firmwarebug and the option/Directive accepts an argument
4561: indicating the type of firmware bug to fix.
4562:
4563: [BA] Fixed a bug that prevented the enable automatic off-line
4564: test feature from enabling. It also prevented the enable Attribute
4565: autosave from working. See CVS entry for additional details.
4566:
4567: [PW] Modified the -r/--report option (smartctl and smartd) to allow the
4568: user to specify the debug level as a positive integer.
4569:
4570: [BA] Added --log directory option to smartctl. If the disk
4571: supports the general-purpose logging feature set (ATA-6/7)
4572: then this option enables the Log Directory to be printed.
4573: This Log Directory shows which device logs are available, and
4574: their lengths in sectors.
4575:
4576: [PW] Added -P/--presets option to smartctl and -P Directive to smartd.
4577:
4578: [GG] Introduce different exit codes indicating the type of problem
4579: encountered for smartd.
4580:
4581: [DG] Add non-medium error count to '-l error' and extended self test
4582: duration to '-l selftest'. Get scsi IEs and temperature changes
4583: working in smartd. Step over various scsi disk problems rather
4584: than abort smartd startup.
4585:
4586: [DG] Support -l error for SCSI disks (and tapes). Output error counter
4587: log pages.
4588:
4589: [BA] Added -F/--fixbyteorder option to smartctl. This allows us to read
4590: SMART data from some disks that have byte-reversed two- and four-
4591: byte quantities in their SMART data structures.
4592:
4593: [BA] Fixed serious bug: the -v options in smartd.conf were all put
4594: together and used together, not drive-by-drive.
4595:
4596: [PW] Added knowndrives.h and knowndrives.c. The knowndrives array
4597: supersedes the drivewarnings array.
4598:
4599: [GG] add {-p,--pidfile} option to smartd to write a PID file on
4600: startup. Update the manpage accordingly.
4601:
4602: [DG] Fix scsi smartd problem detecting SMART support. More cleaning
4603: and fix (and rename) scsiTestUnitReady(). More scsi renaming.
4604:
4605: [BA] Fixed smartd so that if a disk that is explictily listed is not
4606: found, then smartd will exit with nonzero status BEFORE forking.
4607: If a disk can't be registered, this will also be detected before
4608: forking, so that init scripts can react correctly.
4609:
4610: [BA] Replaced all linux-specific ioctl() calls in atacmds.c with
4611: a generic handler smartcommandhandler(). Now the only routine
4612: that needs to be implemented for a given OS is os_specific_handler().
4613: Also implemented the --report ataioctl. This provides
4614: two levels of reporting. Using the option once gives a summary
4615: report of device IOCTL transactions. Using the option twice give
4616: additional info (a printout of ALL device raw 512 byte SMART
4617: data structures). This is useful for debugging.
4618:
4619: [DG] more scsi cleanup. Output scsi device serial number (VPD page
4620: 0x80) if available as part of '-i'. Implement '-t offline' as
4621: default self test (only self test older disks support).
4622:
4623: [BA] Changed crit to info in loglevel of smartd complaint to syslog
4624: if DEVICESCAN enabled and device not found.
4625:
4626: [BA] Added -v 194,10xCelsius option/Directive. Raw Attribute number
4627: 194 is ten times the disk temperature in Celsius.
4628:
4629: [DG] scsicmds.[hc] + scsiprint.c: clean up indentation, remove tabs.
4630: Introduce new intermediate interface based on "struct scsi_cmnd_io"
4631: to isolate SCSI generic commands + responses from Linux details;
4632: should help port to FreeBSD of SCSI part of smartmontools.
4633: Make SCSI command builders more parametric.
4634:
4635: smartmontools-5.1-9
4636:
4637: [BA] smartctl: if HDIO_DRIVE_TASK ioctl() is not implemented (no
4638: kernel support, then try to assess drive health by examining
4639: Attribute values/thresholds directly.
4640:
4641: [BA] smartd/smartctl: added -v 200,writeerrorcount option/Directive
4642: for Fujitsu disks.
4643:
4644: [BA] smartd: Now send email if any of the SMART commands fails,
4645: or if open()ing the device fails. This is often noted
4646: as a common disk failure mode.
4647:
4648: [BA] smartd/smartctl: Added -v N,raw8 -v N,raw16 and -v N,raw48
4649: Directives/Options for printing Raw Attributes in different
4650: Formats.
4651:
4652: [BA] smartd: Added -r ID and -R ID for reporting/tracking Raw
4653: values of Attributes.
4654:
4655: [BA] smartd/smartctl: Changed printing of spin-up-time attribute
4656: raw value to reflect current/average as per IBM standard.
4657:
4658: [BA] smartd/smartctl: Added -v 9,seconds option for disks which
4659: use Attribute 9 for power-on lifetime in seconds.
4660:
4661: [BA] smartctl: Added a warning message so that users of some IBM
4662: disks are warned to update their firmware. Note: we may want
4663: to add a command-line flag to disable the warning messages.
4664: I have done this in a general way, using regexp, so that we
4665: can add warnings about any type of disk that we wish...
4666:
4667: smartmontools-5.1-7
4668:
4669: [BA] smartd: Created a subdirectory examplescripts/ of source
4670: directory that contains executable scripts for the -M exec PATH
4671: Directive of smartd.
4672:
4673: smartmontools-5.1-5
4674:
4675: [BA] smartd: DEVICESCAN in /etc/smartd.conf
4676: can now be followed by all the same Directives as a regular
4677: device name like /dev/hda takes. This allows one to use
4678: (for example):
4679: DEVICESCAN -m root@example.com
4680: in the /etc/smartd.conf file.
4681:
4682: [BA] smartd: Added -c (--checkonce) command-line option. This checks
4683: all devices once, then exits. The exit status can be
4684: used to learn if devices were detected, and if smartd is
4685: functioning correctly. This is primarily for Distribution
4686: scripters.
4687:
4688: [BA] smartd: Implemented -M exec Directive for
4689: smartd.conf. This makes it possible to run an
4690: arbitrary script or mailing program with the
4691: -m option.
4692:
4693: [PW] smartd: Modified -M Directive so that it can be given
4694: multiple times. Added -M exec Directive.
4695:
4696: smartmontools-5.1-4
4697:
4698: [BA] Fixed bug in smartctl pointed out by Pierre Gentile.
4699: -d scsi didn't work because tryata and tryscsi were
4700: reversed -- now works on /devfs SCSI devices.
4701:
4702: [BA] Fixed bug in smartctl pointed out by Gregory Goddard
4703: <ggoddard@ufl.edu>. Manual says that bit 6 of return
4704: value turned on if errors found in smart error log. But
4705: this wasn't implemented.
4706:
4707: smartmontools-5.1-3
4708:
4709: [BA] Modified printing format for 9,minutes to read
4710: Xh+Ym not X h + Y m, so that fields are fixed width.
4711:
4712: [BA] Added Attribute 240 "head flying hours"
4713:
4714: smartmontools-5.1.1
4715:
4716: [BA] As requested, local time/date now printed by smartctl -i
4717:
4718: [PW] Added "help" argument to -v for smartctl
4719:
4720: [PW] Added -D, --showdirectives option to smartd
4721:
4722: [DG] add '-l selftest' capability for SCSI devices (update smartctl.8)
4723:
4724: [BA] smartd,smartctl: added additional Attribute modification option
4725: -v 220,temp and -v 9,temp.
4726:
4727: [PW] Renamed smartd option -X to -d
4728:
4729: START OF SMARTMONTOOLS 5.1 series
4730:
4731: smartmontools-5.0.50
4732:
4733: [PW] Changed smartd.conf Directives -- see man page
4734:
4735: [BA/DG] Fixed uncommented comment in smartd.conf
4736:
4737: [DG] Correct 'Recommended start stop count' for SCSI devices
4738:
4739: [PW] Replaced smartd.conf directive -C with smartd option -i
4740:
4741: [PW] Changed options for smartctl -- see man page.
4742:
4743: [BA] Use strerror() to generate system call error messages.
4744:
4745: [BA] smartd: fflush() all open streams before fork().
4746:
4747: [BA] smartctl, smartd simplified internal handling of checksums
4748: for simpler porting and less code.
4749:
4750: smartmontools-5.0.49
4751:
4752: [PW] smartd --debugmode changed to --debug
4753:
4754: [BA] smartd/smartctl added attribute 230 Head Amplitude from
4755: IBM DPTA-353750.
4756:
4757: [PW] Added list of proposed new options for smartctl to README.
4758:
4759: [PW] smartd: ParseOpts() now uses getopt_long() if HAVE_GETOPT_LONG is
4760: defined and uses getopt() otherwise. This is controlled by CPPFLAGS in
4761: the Makefile.
4762:
4763: [BA] smartd: Fixed a couple of error messages done with perror()
4764: to redirect them as needed.
4765:
4766: smartmontools-5.0.48
4767:
4768: [BA] smartctl: The -O option to enable an Immediate off-line test
4769: did not print out the correct time that the test would take to
4770: complete. This is because the test timer is volatile and not
4771: fixed. This has been fixed, and the smartctl.8 man page has been
4772: updated to explain how to track the Immediate offline test as it
4773: progresses, and to further emphasize the differences between the
4774: off-line immediate test and the self-tests.
4775:
4776: [BA] smartd/smartctl: Added new attribute (200) Multi_Zone_Error_Rate
4777:
4778: [BA] smartctl: modified so that arguments could have either a single -
4779: as in -ea or multiple ones as in -e -a. Improved warning message for
4780: device not opened, and fixed error in redirection of error output of
4781: HD identity command.
4782:
4783: [PW] smartd: added support for long options. All short options are still
4784: supported; see manpage for available long options.
4785:
4786: [BA] smartctl. When raw Attribute value was 2^31 or larger, did
4787: not print correctly.
4788:
4789: smartmontools-5.0.46
4790:
4791: [BA] smartd: added smartd.conf Directives -T and -s. The -T Directive
4792: enables/disables Automatic Offline Testing. The -s Directive
4793: enables/disables Attribute Autosave. Documentation and
4794: example configuration file updated to agree.
4795:
4796: [BA] smartd: user can make smartd check the disks at any time
4797: (ie, interrupt sleep) by sending signal SIGUSR1 to smartd. This
4798: can be done for example with:
4799: kill -USR1 <pid>
4800: where <pid> is the process ID number of smartd.
4801:
4802: [EB] scsi: don't trust the data we receive from the drive too
4803: much. It very well might have errors (like zero response length).
4804: Seen on Megaraid logical drive, and verified in the driver source.
4805:
4806: [BA] smartd: added Directive -m for sending test email and
4807: for modifying email reminder behavior. Updated manual, and sample
4808: configuration file to illustrate & explain this.
4809:
4810: [BA] smartd: increased size of a continued smartd.conf line to
4811: 1023 characters.
4812:
4813: [BA] Simplified Directive parsers and improved warning/error
4814: messages.
4815:
4816: smartmontools-5.0.45
4817:
4818: [EB] Fixed bug in smartd where testunitready logic inverted
4819: prevented functioning on scsi devices.
4820: The bug in question only affects smartd users with scsi devices.
4821: To see if your version of smartd has the testunitready() bug, do
4822: smartd -V
4823: If the version of the module smartd.c in a line like:
4824: Module: smartd.c revision: 1.66 date: 2002/11/17
4825: has a revision greater than or equal to 1.30, and less than or equal to
4826: 1.64, then your version of the code has this problem.
4827: This problem affected releases starting with RELEASE_5_0_16 up to and
4828: including RELEASE_5_0_43.
4829:
4830: [BA] Added testunitnotready to smartctl for symmetry with smartd.
4831:
4832: [SB] added Czech descriptions to .spec file
4833: [SB] corrected comment in smartd.conf example
4834:
4835: [BA] Changed way that entries in the ATA error log are printed,
4836: to make it clearer which is the most recent error and
4837: which is the oldest one.
4838:
4839: NOTE: All changes made prior to this point were done by Bruce Allen
4840: [BA] although several of them had been suggested by earlier postings
4841: by Stanislav Brabec [SB].
4842:
4843: smartmontools-5.0.43
4844:
4845: Changed Temperature_Centigrade to Temperature_Celsius.
4846: The term "Centigrade" ceased to exist in 1948. (c.f
4847: http://www.bartleby.com/64/C004/016.html).
4848:
4849: smartmontools-5.0.42
4850:
4851: Modified SCSI device check to also send warning emails if
4852: requested in directives file.
4853:
4854: Added a new smartd configuration file Directive: -M ADDRESS.
4855: This sends a single warning email to ADDRESS for failures or
4856: errors detected with the -c, -L, -l, or -f Directives.
4857:
4858: smartmontools-5.0.38
4859:
4860: Modified perror() statements in atacmds.c so that printout for SMART
4861: commands errors is properly suppressed or queued depending upon users
4862: choices for error reporting modes.
4863:
4864: Added Italian descriptions to smartmontools.spec file.
4865:
4866: Started impementing send-mail-on-error for smartd; not yet enabled.
4867:
4868: Added -P (Permissive) Directive to smartd.conf file to allow SMART
4869: monitoring of pre-ATA-3 Rev 4 disks that have SMART but do not have
4870: a SMART capability bit.
4871:
4872: Removed charset encodings from smartmontools.spec file for non-English
4873: fields.
4874:
4875: smartmontools-5.0.32
4876:
4877: Added manual page smartd.conf.5 for configuration file.
4878:
4879: smartctl: Missing ANSI prototype in failuretest(); fixed.
4880:
4881: smartctl: Checksum warnings now printed on stdout, or are silent,
4882: depending upon -q and -Q settings.
4883:
4884: smartmontools-5.0.31
4885:
4886: Changed Makefile so that the -V option does not reflect file state
4887: before commit!
4888:
4889: smartctl: added new options -W, -U, and -P to control if and how the
4890: smartctl exits if an error is detected in either a SMART data
4891: structure checksum, or a SMART command returns an error.
4892:
4893: modified manual page to break options into slightly more logical
4894: categories.
4895:
4896: reformatted 'usage' message order to agree with man page ordering
4897:
4898: modified .spec file so that locale information now contains
4899: character set definition. Changed pt_BR to pt since we do not use any
4900: aspect other than language. See man setlocale.
4901:
4902: smartmontools-5.0.30
4903: smartctl: added new options -n and -N to force device to be ATA or SCSI
4904: smartctl: no longer dies silently if device path does not start/dev/X
4905: smartctl: now handles arbitrary device paths
4906:
4907: smartmontools-5.0.29
4908: Modified .spec file and Makefile to make them more compliant with
4909: the "right" way of doing things.
4910:
4911: smartmontools-5.0.26
4912: Fixed typesetting error in man page smartd.8
4913:
4914: Removed redundant variable (harmless) from smartd.c
4915:
4916: smartmontools-5.0.25
4917:
4918: Added a new directive for the configuration file. If the word
4919: DEVICESCAN appears before any non-commented material in the
4920: configuration file, then the confi file will be ignored and the
4921: devices wil be scanned.
4922:
4923: smartmontools-5.0.24
4924:
4925: Note: it has now been confirmed that the code modifications between
4926: 5.0.23 and 5.0.24 have eliminated the GCC 3.2 problems. Note that
4927: there is a GCC bug howerver, see #8404 at
4928: http://gcc.gnu.org/cgi-bin/gnatsweb.pl?database=gcc&cmd=query
4929: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=8404
4930:
4931: Added new Directive for Configuration file:
4932: -C <N> This sets the time in between disk checks to be <N>
4933: seconds apart. Note that although you can give
4934: this Directive multiple times on different lines of
4935: the configuration file, only the final value that
4936: is given has an effect, and applies to all the
4937: disks. The default value of <N> is 1800 sec, and
4938: the minimum allowed value is ten seconds.
4939:
4940: Problem wasn't the print format. F.L.W. Meunier <0@pervalidus.net>
4941: sent me a gcc 3.2 build and I ran it under a debugger. The
4942: problem seems to be with passing the very large (2x512+4) byte
4943: data structures as arguments. I never liked this anyway; it was
4944: inherited from smartsuite. So I've changed all the heavyweight
4945: functions (ATA ones, anyone) to just passing pointers, not hideous
4946: kB size structures on the stack. Hopefully this will now build OK
4947: under gcc 3.2 with any sensible compilation options.
4948:
4949: smartmontools-5.0.23
4950:
4951: Because of reported problems with GCC 3.2 compile, I have gone
4952: thorough the code and explicitly changed all print format
4953: parameters to correspond EXACTLY to int unless they have to be
4954: promoted to long longs. To quote from the glibc bible: [From
4955: GLIBC Manual: Since the prototype doesn't specify types for
4956: optional arguments, in a call to a variadic function the default
4957: argument promotions are performed on the optional argument
4958: values. This means the objects of type char or short int (whether
4959: signed or not) are promoted to either int or unsigned int, as
4960: appropriate.]
4961:
4962: smartmontools-5.0.22
4963:
4964: smartd, smartctl now warn if they find an attribute whose ID
4965: number does not match between Data and Threshold structures.
4966:
4967: Fixed nasty bug which led to wrong number of arguments for a
4968: varargs statement, with attendent stack corruption. Sheesh!
4969: Have added script to CVS attic to help find such nasties in the
4970: future.
4971:
4972: smartmontools-5.0.21
4973:
4974: Eliminated some global variables out of header files and other
4975: minor cleanup of smartd.
4976:
4977: smartmontools-5.0.20
4978:
4979: Did some revision of the man page for smartd and made the usage
4980: messages for Directives 100% consistent.
4981:
4982: smartmontools-5.0-19
4983:
4984: smartd: prints warning message when it gets SIGHUP, saying that it
4985: is NOT re-reading the config file.
4986:
4987: smartctl: updated man page to say self-test commands -O,x,X,s,S,A
4988: appear to be supported in the code. [I can't test these, can anyone
4989: report?]
4990:
4991: smartmontools-5.0-18
4992:
4993: smartctl: smartctl would previously print the LBA of a self-test
4994: if it completed, and the LBA was not 0 or 0xff...f However
4995: according to the specs this is not correct. According to the
4996: specs, if the self-test completed without error then LBA is
4997: undefined. This version fixes that. LBA value only printed if
4998: self-test encountered an error.
4999:
5000: smartmontools-5.0-17
5001:
5002: smartd has changed significantly. This is the first CVS checkin of
5003: code that extends the options available for smartd. The following
5004: options can be placed into the /etc/smartd.conf file, and control the
5005: behavior of smartd.
5006: Configuration file Directives (following device name):
5007: -A Device is an ATA device
5008: -S Device is a SCSI device
5009: -c Monitor SMART Health Status
5010: -l Monitor SMART Error Log for changes
5011: -L Monitor SMART Self-Test Log for new errors
5012: -f Monitor for failure of any 'Usage' Attributes
5013: -p Report changes in 'Prefailure' Attributes
5014: -u Report changes in 'Usage' Attributes
5015: -t Equivalent to -p and -u Directives
5016: -a Equivalent to -c -l -L -f -t Directives
5017: -i ID Ignore Attribute ID for -f Directive
5018: -I ID Ignore Attribute ID for -p, -u or -t Directive
5019: # Comment: text after a hash sign is ignored
5020: \ Line continuation character
5021:
5022: cleaned up functions used for printing CVS IDs. Now use string
5023: library, as it should be.
5024:
5025: modified length of device name string in smartd internal structure
5026: to accomodate max length device name strings
5027:
5028: removed un-implemented (-e = Email notification) option from
5029: command line arg list. We'll put it back on when implemeneted.
5030:
5031: smartd now logs serious (fatal) conditions in its operation at
5032: loglevel LOG_CRIT rather than LOG_INFO before exiting with error.
5033:
5034: smartd used to open a file descriptor for each SMART enabled
5035: device, and then keep it open the entire time smartd was running.
5036: This meant that some commands, like IOREADBLKPART did not work,
5037: since the fd to the device was open. smartd now opens the device
5038: when it needs to read values, then closes it. Also, if one time
5039: around it can't open the device, it simply prints a warning
5040: message but does not give up. Have eliminated the .fd field from
5041: data structures -- no longer gets used.
5042:
5043: smartd now opens SCSI devices as well using O_RDONLY rather than
5044: O_RDWR. If someone can no longer monitor a SCSI device that used
5045: to be readable, this may well be the reason why.
5046:
5047: smartd never checked if the number of ata or scsi devices detected
5048: was greater than the max number it could monitor. Now it does.
5049:
5050: smartmontools-5.0-16
5051:
5052: smartd on startup now looks in the configuration file /etc/smartd.conf for
5053: a list of devices which to include in its monitoring list. See man page
5054: (man smartd) for syntax.
5055:
5056: smartd: close file descriptors of SCSI device if not SMART capable
5057: Closes ALL file descriptors after forking to daemon.
5058:
5059: added new temperature attribute (231, temperature)
5060:
5061: smartd: now open ATA disks using O_RDONLY
5062:
5063: smartmontools-5.0-11
5064:
5065: smartd now prints the name of a failed or changed attribute
5066: into logfile, not just ID number
5067:
5068: Changed name of -p (print version) option to -V
5069:
5070: Minor change in philosophy: if a SMART command fails or the device
5071: appears incapable of a SMART command that the user has asked for,
5072: complain by printing an error message, but go ahead and try
5073: anyway. Since unimplemented SMART commands should just return an
5074: error but not cause disk problems, this should't cause any
5075: difficulty.
5076:
5077: Added two new flags: q and Q. q is quiet mode - only print: For
5078: the -l option, errors recorded in the SMART error log; For the -L
5079: option, errors recorded in the device self-test log; For the -c
5080: SMART "disk failing" status or device attributes (pre-failure or
5081: usage) which failed either now or in the past; For the -v option
5082: device attributes (pre-failure or usage) which failed either now
5083: or in the past. Q is Very Quiet mode: Print no ouput. The only
5084: way to learn about what was found is to use the exit status of
5085: smartctl.
5086:
5087: smartctl now returns sensible values (bitmask). See smartctl.h
5088: for the values, and the man page for documentation.
5089:
5090: The SMART status check now uses the correct ATA call. If failure
5091: is detected we search through attributes to list the failed ones.
5092: If the SMART status check shows GOOD, we then look to see if their
5093: are any usage attributes or prefail attributes have failed at any
5094: time. If so we print them.
5095:
5096: Modified function that prints vendor attributes to say if the
5097: attribute has currently failed or has ever failed.
5098:
5099: -p option now prints out license info and CVS strings for all
5100: modules in the code, nicely formatted.
5101:
5102: Previous versions of this code (and Smartsuite) only generate
5103: SMART failure errors if the value of an attribute is below the
5104: threshold and the prefailure bit is set. However the ATA Spec
5105: (ATA4 <=Rev 4) says that it is a SMART failure if the value of an
5106: attribute is LESS THAN OR EQUAL to the threshold and the
5107: prefailure bit is set. This is now fixed in both smartctl and
5108: smartd. Note that this is a troubled subject -- the original
5109: SFF 8035i specification defining SMART was inconsistent about
5110: this. One section says that Attribute==Threshold is pass,
5111: and another section says it is fail. However the ATA specs are
5112: consistent and say Attribute==Threshold is a fail.
5113:
5114: smartd did not print the correct value of any failing SMART attribute. It
5115: printed the index in the attribute table, not the attribute
5116: ID. This is fixed.
5117:
5118: when starting self-tests in captive mode ioctl returns EIO because
5119: the drive has been busied out. Detect this and don't return an eror
5120: in this case. Check this this is correct (or how to fix it?)
5121:
5122: fixed possible error in how to determine ATA standard support
5123: for devices with no ATA minor revision number.
5124:
5125: device opened only in read-only not read-write mode. Don't need R/W
5126: access to get smart data. Check this with Andre.
5127:
5128: smartctl now handles all possible choices of "multiple options"
5129: gracefully. It goes through the following phases of operation,
5130: in order: INFORMATION, ENABLE/DISABLE, DISPLAY DATA, RUN/ABORT TESTS.
5131: Documentation has bee updated to explain the different phases of
5132: operation. Control flow through ataPrintMain()
5133: simplified.
5134:
5135: If reading device identity information fails, try seeing if the info
5136: can be accessed using a "DEVICE PACKET" command. This way we can
5137: at least get device info.
5138:
5139: Modified Makefile to automatically tag CVS archive on issuance of
5140: a release
5141:
5142: Modified drive detection so minor device ID code showing ATA-3 rev
5143: 0 (no SMART) is known to not be SMART capable.
5144:
5145: Now verify the checksum of the device ID data structure, and of the
5146: attributes threshold structure. Before neither of these
5147: structures had their checksums verified.
5148:
5149: New behavior vis-a-vis checksums. If they are wrong, we log
5150: warning messages to stdout, stderr, and syslog, but carry on
5151: anyway. All functions now call a checksumwarning routine if the
5152: checksum doesn't vanish as it should.
5153:
5154: Changed Read Hard Disk Identity function to get fresh info from
5155: the disk on each call rather than to use the values that were read
5156: upon boot-up into the BIOS. This is the biggest change in this
5157: release. The ioctl(device, HDIO_GET_IDENTITY, buf ) call should
5158: be avoided in such code. Note that if people get garbled strings
5159: for the model, serial no and firmware versions of their drives,
5160: then blame goes here (the BIOS does the byte swapping for you,
5161: apparently!)
5162:
5163: Function ataSmartSupport now looks at correct bits in drive
5164: identity structure to verify first that these bits are valid,
5165: before using them.
5166:
5167: Function ataIsSmartEnabled() written which uses the Drive ID state
5168: information to tell if SMART is enabled or not. We'll carry this
5169: along for the moment without using it.
5170:
5171: Function ataDoesSmartWork() guaranteed to work if the device
5172: supports SMART.
5173:
5174: Replace some numbers by #define MACROS
5175:
5176: Wrote Function TestTime to return test time associated with each
5177: different type of test.
5178:
5179: Thinking of the future, have added a new function called
5180: ataSmartStatus2(). Eventually when I understand how to use the
5181: TASKFILE API and am sure that this works correctly, it will
5182: replace ataSmartStatus(). This queries the drive directly to
5183: see if the SMART status is OK, rather than comparing thresholds to
5184: attribute values ourselves. But I need to get some drives that fail
5185: their SMART status to check it.
5186:
5187:
5188: smartmontools-5.0-10
5189: Removed extraneous space before printing in some error messages
5190: Fixed additional typos in documentation
5191: Fixed some character buffers that were too short for their contents.
5192:
5193: smartmontools-5.0-9
5194:
5195: Put project home path into all source files near the top
5196: Corrected typos in the documentation
5197: Modified Makefile so that Mandrake Cooker won't increment version number
5198: (unless they happen to be working on my machine, which I doubt!)
5199:
5200: smartmontools-5.0-8:
5201:
5202: For IBM disks whose raw temp data includes three temps. print all
5203: three
5204:
5205: print timestamps for error log to msec precision
5206:
5207: added -m option for Hitachi disks that store power on life in
5208: minutes
5209:
5210: added -L option for printing self-test error logs
5211:
5212: in -l option, now print power on lifetime, so that one can see
5213: when the error took place
5214:
5215: updated SMART structure definitions to ATA-5 spec
5216:
5217: added -p option
5218:
5219: added -f and -F options to enable/disable autosave threshold
5220: parameters
5221:
5222: changed argv parsing to use getops -- elminate buffer overflow
5223: vulnerability
5224:
5225: expanded and corrected documentation
5226:
5227: fixed problem with smartd. It did not actually call
5228: ataSmartEnable()! Since the argument was left out, the test
5229: always suceeded because it evaluated to a pointer to the function.
5230:
5231: smartd: closed open file descriptors if device does not support
5232: smart. Note: this still needs to be fixed for SCSI devices
5233:
5234:
5235: smartmontools-5.0-0 STARTED with smartsuite-2.1-2
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>