Annotation of embedaddon/smartmontools/ataprint.cpp, revision 1.1.1.4
1.1 misho 1: /*
2: * ataprint.cpp
3: *
4: * Home page of code is: http://smartmontools.sourceforge.net
5: *
6: * Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
1.1.1.3 misho 7: * Copyright (C) 2008-13 Christian Franke <smartmontools-support@lists.sourceforge.net>
1.1 misho 8: * Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
9: *
10: * This program is free software; you can redistribute it and/or modify
11: * it under the terms of the GNU General Public License as published by
12: * the Free Software Foundation; either version 2, or (at your option)
13: * any later version.
14: *
15: * You should have received a copy of the GNU General Public License
1.1.1.3 misho 16: * (for example COPYING); If not, see <http://www.gnu.org/licenses/>.
1.1 misho 17: *
18: * This code was originally developed as a Senior Thesis by Michael Cornwell
19: * at the Concurrent Systems Laboratory (now part of the Storage Systems
20: * Research Center), Jack Baskin School of Engineering, University of
21: * California, Santa Cruz. http://ssrc.soe.ucsc.edu/
22: *
23: */
24:
25: #include "config.h"
26:
27: #include <ctype.h>
28: #include <errno.h>
29: #include <stdio.h>
30: #include <stdlib.h>
31: #include <string.h>
32:
33: #include "int64.h"
34: #include "atacmdnames.h"
35: #include "atacmds.h"
1.1.1.3 misho 36: #include "ataidentify.h"
1.1 misho 37: #include "dev_interface.h"
38: #include "ataprint.h"
39: #include "smartctl.h"
40: #include "utility.h"
41: #include "knowndrives.h"
42:
1.1.1.4 ! misho 43: const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3831 2013-07-20 14:25:56Z chrfranke $"
1.1 misho 44: ATAPRINT_H_CVSID;
45:
46:
47: static const char * infofound(const char *output) {
48: return (*output ? output : "[No Information Found]");
49: }
50:
51: // Return true if '-T permissive' is specified,
52: // used to ignore missing capabilities
53: static bool is_permissive()
54: {
55: if (!failuretest_permissive)
56: return false;
57: failuretest_permissive--;
58: return true;
59: }
60:
61: /* For the given Command Register (CR) and Features Register (FR), attempts
62: * to construct a string that describes the contents of the Status
1.1.1.3 misho 63: * Register (ST) and Error Register (ER). If the meanings of the flags of
64: * the error register are not known for the given command then it returns an
65: * empty string.
1.1 misho 66: *
67: * The meanings of the flags of the error register for all commands are
68: * described in the ATA spec and could all be supported here in theory.
69: * Currently, only a few commands are supported (those that have been seen
70: * to produce errors). If many more are to be added then this function
71: * should probably be redesigned.
72: */
73:
1.1.1.3 misho 74: static std::string format_st_er_desc(
1.1 misho 75: unsigned char CR, unsigned char FR,
76: unsigned char ST, unsigned char ER,
77: unsigned short SC,
78: const ata_smart_errorlog_error_struct * lba28_regs,
79: const ata_smart_exterrlog_error * lba48_regs
80: )
81: {
82: const char *error_flag[8];
83: int i, print_lba=0, print_sector=0;
84:
85: // Set of character strings corresponding to different error codes.
86: // Please keep in alphabetic order if you add more.
87: const char *abrt = "ABRT"; // ABORTED
88: const char *amnf = "AMNF"; // ADDRESS MARK NOT FOUND
89: const char *ccto = "CCTO"; // COMMAND COMPLETION TIMED OUT
90: const char *eom = "EOM"; // END OF MEDIA
91: const char *icrc = "ICRC"; // INTERFACE CRC ERROR
92: const char *idnf = "IDNF"; // ID NOT FOUND
93: const char *ili = "ILI"; // MEANING OF THIS BIT IS COMMAND-SET SPECIFIC
94: const char *mc = "MC"; // MEDIA CHANGED
95: const char *mcr = "MCR"; // MEDIA CHANGE REQUEST
96: const char *nm = "NM"; // NO MEDIA
97: const char *obs = "obs"; // OBSOLETE
98: const char *tk0nf = "TK0NF"; // TRACK 0 NOT FOUND
99: const char *unc = "UNC"; // UNCORRECTABLE
100: const char *wp = "WP"; // WRITE PROTECTED
101:
102: /* If for any command the Device Fault flag of the status register is
103: * not used then used_device_fault should be set to 0 (in the CR switch
104: * below)
105: */
106: int uses_device_fault = 1;
107:
108: /* A value of NULL means that the error flag isn't used */
109: for (i = 0; i < 8; i++)
110: error_flag[i] = NULL;
111:
1.1.1.3 misho 112: std::string str;
113:
1.1 misho 114: switch (CR) {
115: case 0x10: // RECALIBRATE
116: error_flag[2] = abrt;
117: error_flag[1] = tk0nf;
118: break;
119: case 0x20: /* READ SECTOR(S) */
120: case 0x21: // READ SECTOR(S)
121: case 0x24: // READ SECTOR(S) EXT
122: case 0xC4: /* READ MULTIPLE */
123: case 0x29: // READ MULTIPLE EXT
124: error_flag[6] = unc;
125: error_flag[5] = mc;
126: error_flag[4] = idnf;
127: error_flag[3] = mcr;
128: error_flag[2] = abrt;
129: error_flag[1] = nm;
130: error_flag[0] = amnf;
131: print_lba=1;
132: break;
133: case 0x22: // READ LONG (with retries)
134: case 0x23: // READ LONG (without retries)
135: error_flag[4] = idnf;
136: error_flag[2] = abrt;
137: error_flag[0] = amnf;
138: print_lba=1;
139: break;
140: case 0x2a: // READ STREAM DMA
141: case 0x2b: // READ STREAM PIO
142: if (CR==0x2a)
143: error_flag[7] = icrc;
144: error_flag[6] = unc;
145: error_flag[5] = mc;
146: error_flag[4] = idnf;
147: error_flag[3] = mcr;
148: error_flag[2] = abrt;
149: error_flag[1] = nm;
150: error_flag[0] = ccto;
151: print_lba=1;
152: print_sector=SC;
153: break;
154: case 0x3A: // WRITE STREAM DMA
155: case 0x3B: // WRITE STREAM PIO
156: if (CR==0x3A)
157: error_flag[7] = icrc;
158: error_flag[6] = wp;
159: error_flag[5] = mc;
160: error_flag[4] = idnf;
161: error_flag[3] = mcr;
162: error_flag[2] = abrt;
163: error_flag[1] = nm;
164: error_flag[0] = ccto;
165: print_lba=1;
166: print_sector=SC;
167: break;
168: case 0x25: // READ DMA EXT
169: case 0x26: // READ DMA QUEUED EXT
170: case 0xC7: // READ DMA QUEUED
171: case 0xC8: // READ DMA (with retries)
172: case 0xC9: // READ DMA (without retries, obsolete since ATA-5)
173: case 0x60: // READ FPDMA QUEUED (NCQ)
174: error_flag[7] = icrc;
175: error_flag[6] = unc;
176: error_flag[5] = mc;
177: error_flag[4] = idnf;
178: error_flag[3] = mcr;
179: error_flag[2] = abrt;
180: error_flag[1] = nm;
181: error_flag[0] = amnf;
182: print_lba=1;
183: if (CR==0x25 || CR==0xC8)
184: print_sector=SC;
185: break;
186: case 0x30: /* WRITE SECTOR(S) */
187: case 0x31: // WRITE SECTOR(S)
188: case 0x34: // WRITE SECTOR(S) EXT
189: case 0xC5: /* WRITE MULTIPLE */
190: case 0x39: // WRITE MULTIPLE EXT
191: case 0xCE: // WRITE MULTIPLE FUA EXT
192: error_flag[6] = wp;
193: error_flag[5] = mc;
194: error_flag[4] = idnf;
195: error_flag[3] = mcr;
196: error_flag[2] = abrt;
197: error_flag[1] = nm;
198: print_lba=1;
199: break;
200: case 0x32: // WRITE LONG (with retries)
201: case 0x33: // WRITE LONG (without retries)
202: error_flag[4] = idnf;
203: error_flag[2] = abrt;
204: print_lba=1;
205: break;
206: case 0x3C: // WRITE VERIFY
207: error_flag[6] = unc;
208: error_flag[4] = idnf;
209: error_flag[2] = abrt;
210: error_flag[0] = amnf;
211: print_lba=1;
212: break;
213: case 0x40: // READ VERIFY SECTOR(S) with retries
214: case 0x41: // READ VERIFY SECTOR(S) without retries
215: case 0x42: // READ VERIFY SECTOR(S) EXT
216: error_flag[6] = unc;
217: error_flag[5] = mc;
218: error_flag[4] = idnf;
219: error_flag[3] = mcr;
220: error_flag[2] = abrt;
221: error_flag[1] = nm;
222: error_flag[0] = amnf;
223: print_lba=1;
224: break;
225: case 0xA0: /* PACKET */
226: /* Bits 4-7 are all used for sense key (a 'command packet set specific error
227: * indication' according to the ATA/ATAPI-7 standard), so "Sense key" will
228: * be repeated in the error description string if more than one of those
229: * bits is set.
230: */
231: error_flag[7] = "Sense key (bit 3)",
232: error_flag[6] = "Sense key (bit 2)",
233: error_flag[5] = "Sense key (bit 1)",
234: error_flag[4] = "Sense key (bit 0)",
235: error_flag[2] = abrt;
236: error_flag[1] = eom;
237: error_flag[0] = ili;
238: break;
239: case 0xA1: /* IDENTIFY PACKET DEVICE */
240: case 0xEF: /* SET FEATURES */
241: case 0x00: /* NOP */
242: case 0xC6: /* SET MULTIPLE MODE */
243: error_flag[2] = abrt;
244: break;
245: case 0x2F: // READ LOG EXT
246: error_flag[6] = unc;
247: error_flag[4] = idnf;
248: error_flag[2] = abrt;
249: error_flag[0] = obs;
250: break;
251: case 0x3F: // WRITE LOG EXT
252: error_flag[4] = idnf;
253: error_flag[2] = abrt;
254: error_flag[0] = obs;
255: break;
256: case 0xB0: /* SMART */
257: switch(FR) {
258: case 0xD0: // SMART READ DATA
259: case 0xD1: // SMART READ ATTRIBUTE THRESHOLDS
260: case 0xD5: /* SMART READ LOG */
261: error_flag[6] = unc;
262: error_flag[4] = idnf;
263: error_flag[2] = abrt;
264: error_flag[0] = obs;
265: break;
266: case 0xD6: /* SMART WRITE LOG */
267: error_flag[4] = idnf;
268: error_flag[2] = abrt;
269: error_flag[0] = obs;
270: break;
271: case 0xD2: // Enable/Disable Attribute Autosave
272: case 0xD3: // SMART SAVE ATTRIBUTE VALUES (ATA-3)
273: case 0xD8: // SMART ENABLE OPERATIONS
274: case 0xD9: /* SMART DISABLE OPERATIONS */
275: case 0xDA: /* SMART RETURN STATUS */
276: case 0xDB: // Enable/Disable Auto Offline (SFF)
277: error_flag[2] = abrt;
278: break;
279: case 0xD4: // SMART EXECUTE IMMEDIATE OFFLINE
280: error_flag[4] = idnf;
281: error_flag[2] = abrt;
282: break;
283: default:
1.1.1.3 misho 284: return str; // ""
1.1 misho 285: break;
286: }
287: break;
288: case 0xB1: /* DEVICE CONFIGURATION */
289: switch (FR) {
290: case 0xC0: /* DEVICE CONFIGURATION RESTORE */
291: error_flag[2] = abrt;
292: break;
293: default:
1.1.1.3 misho 294: return str; // ""
1.1 misho 295: break;
296: }
297: break;
298: case 0xCA: // WRITE DMA (with retries)
299: case 0xCB: // WRITE DMA (without retries, obsolete since ATA-5)
300: case 0x35: // WRITE DMA EXT
301: case 0x3D: // WRITE DMA FUA EXT
302: case 0xCC: // WRITE DMA QUEUED
303: case 0x36: // WRITE DMA QUEUED EXT
304: case 0x3E: // WRITE DMA QUEUED FUA EXT
305: case 0x61: // WRITE FPDMA QUEUED (NCQ)
306: error_flag[7] = icrc;
307: error_flag[6] = wp;
308: error_flag[5] = mc;
309: error_flag[4] = idnf;
310: error_flag[3] = mcr;
311: error_flag[2] = abrt;
312: error_flag[1] = nm;
313: error_flag[0] = amnf;
314: print_lba=1;
315: if (CR==0x35)
316: print_sector=SC;
317: break;
318: case 0xE4: // READ BUFFER
319: case 0xE8: // WRITE BUFFER
320: error_flag[2] = abrt;
321: break;
322: default:
1.1.1.3 misho 323: return str; // ""
1.1 misho 324: }
325:
326: /* We ignore any status flags other than Device Fault and Error */
327:
328: if (uses_device_fault && (ST & (1 << 5))) {
1.1.1.3 misho 329: str = "Device Fault";
1.1 misho 330: if (ST & 1) // Error flag
1.1.1.3 misho 331: str += "; ";
1.1 misho 332: }
333: if (ST & 1) { // Error flag
334: int count = 0;
335:
1.1.1.3 misho 336: str += "Error: ";
1.1 misho 337: for (i = 7; i >= 0; i--)
338: if ((ER & (1 << i)) && (error_flag[i])) {
339: if (count++ > 0)
1.1.1.3 misho 340: str += ", ";
341: str += error_flag[i];
1.1 misho 342: }
343: }
344:
345: // If the error was a READ or WRITE error, print the Logical Block
346: // Address (LBA) at which the read or write failed.
347: if (print_lba) {
348: // print number of sectors, if known, and append to print string
1.1.1.3 misho 349: if (print_sector)
350: str += strprintf(" %d sectors", print_sector);
1.1 misho 351:
352: if (lba28_regs) {
353: unsigned lba;
354: // bits 24-27: bits 0-3 of DH
355: lba = 0xf & lba28_regs->drive_head;
356: lba <<= 8;
357: // bits 16-23: CH
358: lba |= lba28_regs->cylinder_high;
359: lba <<= 8;
360: // bits 8-15: CL
361: lba |= lba28_regs->cylinder_low;
362: lba <<= 8;
363: // bits 0-7: SN
364: lba |= lba28_regs->sector_number;
1.1.1.3 misho 365: str += strprintf(" at LBA = 0x%08x = %u", lba, lba);
1.1 misho 366: }
367: else if (lba48_regs) {
368: // This assumes that upper LBA registers are 0 for 28-bit commands
369: // (TODO: detect 48-bit commands above)
370: uint64_t lba48;
371: lba48 = lba48_regs->lba_high_register_hi;
372: lba48 <<= 8;
373: lba48 |= lba48_regs->lba_mid_register_hi;
374: lba48 <<= 8;
375: lba48 |= lba48_regs->lba_low_register_hi;
376: lba48 |= lba48_regs->device_register & 0xf;
377: lba48 <<= 8;
378: lba48 |= lba48_regs->lba_high_register;
379: lba48 <<= 8;
380: lba48 |= lba48_regs->lba_mid_register;
381: lba48 <<= 8;
382: lba48 |= lba48_regs->lba_low_register;
1.1.1.3 misho 383: str += strprintf(" at LBA = 0x%08"PRIx64" = %"PRIu64, lba48, lba48);
1.1 misho 384: }
385: }
386:
1.1.1.3 misho 387: return str;
1.1 misho 388: }
389:
1.1.1.3 misho 390: static inline std::string format_st_er_desc(
1.1 misho 391: const ata_smart_errorlog_struct * data)
392: {
1.1.1.3 misho 393: return format_st_er_desc(
1.1 misho 394: data->commands[4].commandreg,
395: data->commands[4].featuresreg,
396: data->error_struct.status,
397: data->error_struct.error_register,
398: data->error_struct.sector_count,
399: &data->error_struct, (const ata_smart_exterrlog_error *)0);
400: }
401:
1.1.1.3 misho 402: static inline std::string format_st_er_desc(
1.1 misho 403: const ata_smart_exterrlog_error_log * data)
404: {
1.1.1.3 misho 405: return format_st_er_desc(
1.1 misho 406: data->commands[4].command_register,
407: data->commands[4].features_register,
408: data->error.status_register,
409: data->error.error_register,
410: data->error.count_register_hi << 8 | data->error.count_register,
411: (const ata_smart_errorlog_error_struct *)0, &data->error);
412: }
413:
1.1.1.3 misho 414:
415: static int find_msb(unsigned short word)
416: {
417: for (int bit = 15; bit >= 0; bit--)
418: if (word & (1 << bit))
419: return bit;
420: return -1;
421: }
422:
423: static const char * get_ata_major_version(const ata_identify_device * drive)
424: {
425: switch (find_msb(drive->major_rev_num)) {
426: case 10: return "ACS-3";
427: case 9: return "ACS-2";
428: case 8: return "ATA8-ACS";
429: case 7: return "ATA/ATAPI-7";
430: case 6: return "ATA/ATAPI-6";
431: case 5: return "ATA/ATAPI-5";
432: case 4: return "ATA/ATAPI-4";
433: case 3: return "ATA-3";
434: case 2: return "ATA-2";
435: case 1: return "ATA-1";
436: default: return 0;
437: }
438: }
439:
440: static const char * get_ata_minor_version(const ata_identify_device * drive)
441: {
442: switch (drive->minor_rev_num) {
443: case 0x0001: return "ATA-1 X3T9.2/781D prior to revision 4";
444: case 0x0002: return "ATA-1 published, ANSI X3.221-1994";
445: case 0x0003: return "ATA-1 X3T9.2/781D revision 4";
446: case 0x0004: return "ATA-2 published, ANSI X3.279-1996";
447: case 0x0005: return "ATA-2 X3T10/948D prior to revision 2k";
448: case 0x0006: return "ATA-3 X3T10/2008D revision 1";
449: case 0x0007: return "ATA-2 X3T10/948D revision 2k";
450: case 0x0008: return "ATA-3 X3T10/2008D revision 0";
451: case 0x0009: return "ATA-2 X3T10/948D revision 3";
452: case 0x000a: return "ATA-3 published, ANSI X3.298-1997";
453: case 0x000b: return "ATA-3 X3T10/2008D revision 6"; // 1st ATA-3 revision with SMART
454: case 0x000c: return "ATA-3 X3T13/2008D revision 7 and 7a";
455: case 0x000d: return "ATA/ATAPI-4 X3T13/1153D revision 6";
456: case 0x000e: return "ATA/ATAPI-4 T13/1153D revision 13";
457: case 0x000f: return "ATA/ATAPI-4 X3T13/1153D revision 7";
458: case 0x0010: return "ATA/ATAPI-4 T13/1153D revision 18";
459: case 0x0011: return "ATA/ATAPI-4 T13/1153D revision 15";
460: case 0x0012: return "ATA/ATAPI-4 published, ANSI NCITS 317-1998";
461: case 0x0013: return "ATA/ATAPI-5 T13/1321D revision 3";
462: case 0x0014: return "ATA/ATAPI-4 T13/1153D revision 14";
463: case 0x0015: return "ATA/ATAPI-5 T13/1321D revision 1";
464: case 0x0016: return "ATA/ATAPI-5 published, ANSI NCITS 340-2000";
465: case 0x0017: return "ATA/ATAPI-4 T13/1153D revision 17";
466: case 0x0018: return "ATA/ATAPI-6 T13/1410D revision 0";
467: case 0x0019: return "ATA/ATAPI-6 T13/1410D revision 3a";
468: case 0x001a: return "ATA/ATAPI-7 T13/1532D revision 1";
469: case 0x001b: return "ATA/ATAPI-6 T13/1410D revision 2";
470: case 0x001c: return "ATA/ATAPI-6 T13/1410D revision 1";
471: case 0x001d: return "ATA/ATAPI-7 published, ANSI INCITS 397-2005";
472: case 0x001e: return "ATA/ATAPI-7 T13/1532D revision 0";
473: case 0x001f: return "ACS-3 T13/2161-D revision 3b";
474:
475: case 0x0021: return "ATA/ATAPI-7 T13/1532D revision 4a";
476: case 0x0022: return "ATA/ATAPI-6 published, ANSI INCITS 361-2002";
477:
478: case 0x0027: return "ATA8-ACS T13/1699-D revision 3c";
479: case 0x0028: return "ATA8-ACS T13/1699-D revision 6";
480: case 0x0029: return "ATA8-ACS T13/1699-D revision 4";
481:
482: case 0x0031: return "ACS-2 T13/2015-D revision 2";
483:
484: case 0x0033: return "ATA8-ACS T13/1699-D revision 3e";
485:
486: case 0x0039: return "ATA8-ACS T13/1699-D revision 4c";
487:
488: case 0x0042: return "ATA8-ACS T13/1699-D revision 3f";
489:
490: case 0x0052: return "ATA8-ACS T13/1699-D revision 3b";
491:
492: case 0x0107: return "ATA8-ACS T13/1699-D revision 2d";
493:
494: case 0x0110: return "ACS-2 T13/2015-D revision 3";
495:
496: default: return 0;
497: }
498: }
499:
500: static const char * get_sata_version(const ata_identify_device * drive)
501: {
502: unsigned short word222 = drive->words088_255[222-88];
503: if ((word222 & 0xf000) != 0x1000)
504: return 0;
505: switch (find_msb(word222 & 0x0fff)) {
506: default: return "SATA >3.1";
507: case 6: return "SATA 3.1";
508: case 5: return "SATA 3.0";
509: case 4: return "SATA 2.6";
510: case 3: return "SATA 2.5";
511: case 2: return "SATA II Ext";
512: case 1: return "SATA 1.0a";
513: case 0: return "ATA8-AST";
514: case -1: return 0;
515: }
516: }
517:
518: static const char * get_sata_speed(int level)
519: {
520: if (level <= 0)
521: return 0;
522: switch (level) {
523: default: return ">6.0 Gb/s";
524: case 3: return "6.0 Gb/s";
525: case 2: return "3.0 Gb/s";
526: case 1: return "1.5 Gb/s";
527: }
528: }
529:
530: static const char * get_sata_maxspeed(const ata_identify_device * drive)
531: {
532: unsigned short word076 = drive->words047_079[76-47];
533: if (word076 & 0x0001)
534: return 0;
535: return get_sata_speed(find_msb(word076 & 0x00fe));
536: }
537:
538: static const char * get_sata_curspeed(const ata_identify_device * drive)
539: {
540: unsigned short word077 = drive->words047_079[77-47];
541: if (word077 & 0x0001)
542: return 0;
543: return get_sata_speed((word077 >> 1) & 0x7);
544: }
545:
546:
1.1 misho 547: static void print_drive_info(const ata_identify_device * drive,
1.1.1.3 misho 548: const ata_size_info & sizes, int rpm,
1.1 misho 549: const drive_settings * dbentry)
550: {
551: // format drive information (with byte swapping as needed)
552: char model[40+1], serial[20+1], firmware[8+1];
553: ata_format_id_string(model, drive->model, sizeof(model)-1);
554: ata_format_id_string(serial, drive->serial_no, sizeof(serial)-1);
555: ata_format_id_string(firmware, drive->fw_rev, sizeof(firmware)-1);
556:
557: // Print model family if known
558: if (dbentry && *dbentry->modelfamily)
559: pout("Model Family: %s\n", dbentry->modelfamily);
560:
561: pout("Device Model: %s\n", infofound(model));
562: if (!dont_print_serial_number) {
563: pout("Serial Number: %s\n", infofound(serial));
564:
565: unsigned oui = 0; uint64_t unique_id = 0;
566: int naa = ata_get_wwn(drive, oui, unique_id);
567: if (naa >= 0)
568: pout("LU WWN Device Id: %x %06x %09"PRIx64"\n", naa, oui, unique_id);
1.1.1.3 misho 569:
570: // Additional Product Identifier (OEM Id) string in words 170-173
571: // (e08130r1, added in ACS-2 Revision 1, December 17, 2008)
572: if (0x2020 <= drive->words088_255[170-88] && drive->words088_255[170-88] <= 0x7e7e) {
573: char add[8+1];
574: ata_format_id_string(add, (const unsigned char *)(drive->words088_255+170-88), sizeof(add)-1);
575: if (add[0])
576: pout("Add. Product Id: %s\n", add);
577: }
1.1 misho 578: }
579: pout("Firmware Version: %s\n", infofound(firmware));
580:
581: if (sizes.capacity) {
582: // Print capacity
583: char num[64], cap[32];
584: pout("User Capacity: %s bytes [%s]\n",
585: format_with_thousands_sep(num, sizeof(num), sizes.capacity),
586: format_capacity(cap, sizeof(cap), sizes.capacity));
587:
588: // Print sector sizes.
589: if (sizes.phy_sector_size == sizes.log_sector_size)
590: pout("Sector Size: %u bytes logical/physical\n", sizes.log_sector_size);
591: else {
592: pout("Sector Sizes: %u bytes logical, %u bytes physical",
593: sizes.log_sector_size, sizes.phy_sector_size);
594: if (sizes.log_sector_offset)
595: pout(" (offset %u bytes)", sizes.log_sector_offset);
596: pout("\n");
597: }
598: }
599:
1.1.1.3 misho 600: // Print nominal media rotation rate if reported
601: if (rpm) {
602: if (rpm == 1)
603: pout("Rotation Rate: Solid State Device\n");
604: else if (rpm > 1)
605: pout("Rotation Rate: %d rpm\n", rpm);
606: else
607: pout("Rotation Rate: Unknown (0x%04x)\n", -rpm);
608: }
609:
1.1 misho 610: // See if drive is recognized
611: pout("Device is: %s\n", !dbentry ?
612: "Not in smartctl database [for details use: -P showall]":
613: "In smartctl database [for details use: -P show]");
614:
1.1.1.3 misho 615: // Print ATA version
616: std::string ataver;
617: if ( (drive->major_rev_num != 0x0000 && drive->major_rev_num != 0xffff)
618: || (drive->minor_rev_num != 0x0000 && drive->minor_rev_num != 0xffff)) {
619: const char * majorver = get_ata_major_version(drive);
620: const char * minorver = get_ata_minor_version(drive);
621:
622: if (majorver && minorver && str_starts_with(minorver, majorver)) {
623: // Major and minor strings match, print minor string only
624: ataver = minorver;
1.1 misho 625: }
626: else {
1.1.1.3 misho 627: if (majorver)
628: ataver = majorver;
629: else
630: ataver = strprintf("Unknown(0x%04x)", drive->major_rev_num);
631:
632: if (minorver)
633: ataver += strprintf(", %s", minorver);
634: else if (drive->minor_rev_num != 0x0000 && drive->minor_rev_num != 0xffff)
635: ataver += strprintf(" (unknown minor revision code: 0x%04x)", drive->minor_rev_num);
1.1 misho 636: else
1.1.1.3 misho 637: ataver += " (minor revision not indicated)";
1.1 misho 638: }
639: }
1.1.1.3 misho 640: pout("ATA Version is: %s\n", infofound(ataver.c_str()));
1.1 misho 641:
1.1.1.3 misho 642: // If SATA drive print SATA version and speed
643: const char * sataver = get_sata_version(drive);
644: if (sataver) {
645: const char * maxspeed = get_sata_maxspeed(drive);
646: const char * curspeed = get_sata_curspeed(drive);
647: pout("SATA Version is: %s%s%s%s%s%s\n", sataver,
648: (maxspeed ? ", " : ""), (maxspeed ? maxspeed : ""),
649: (curspeed ? " (current: " : ""), (curspeed ? curspeed : ""),
650: (curspeed ? ")" : ""));
651: }
1.1 misho 652:
653: // print current time and date and timezone
654: char timedatetz[DATEANDEPOCHLEN]; dateandtimezone(timedatetz);
655: pout("Local Time is: %s\n", timedatetz);
656:
657: // Print warning message, if there is one
658: if (dbentry && *dbentry->warningmsg)
659: pout("\n==> WARNING: %s\n\n", dbentry->warningmsg);
660: }
661:
662: static const char *OfflineDataCollectionStatus(unsigned char status_byte)
663: {
664: unsigned char stat=status_byte & 0x7f;
665:
666: switch(stat){
667: case 0x00:
668: return "was never started";
669: case 0x02:
670: return "was completed without error";
671: case 0x03:
672: if (status_byte == 0x03)
673: return "is in progress";
674: else
675: return "is in a Reserved state";
676: case 0x04:
677: return "was suspended by an interrupting command from host";
678: case 0x05:
679: return "was aborted by an interrupting command from host";
680: case 0x06:
681: return "was aborted by the device with a fatal error";
682: default:
683: if (stat >= 0x40)
684: return "is in a Vendor Specific state";
685: else
686: return "is in a Reserved state";
687: }
688: }
689:
690:
691: // prints verbose value Off-line data collection status byte
692: static void PrintSmartOfflineStatus(const ata_smart_values * data)
693: {
694: pout("Offline data collection status: (0x%02x)\t",
695: (int)data->offline_data_collection_status);
696:
697: // Off-line data collection status byte is not a reserved
698: // or vendor specific value
699: pout("Offline data collection activity\n"
700: "\t\t\t\t\t%s.\n", OfflineDataCollectionStatus(data->offline_data_collection_status));
701:
702: // Report on Automatic Data Collection Status. Only IBM documents
703: // this bit. See SFF 8035i Revision 2 for details.
704: if (data->offline_data_collection_status & 0x80)
705: pout("\t\t\t\t\tAuto Offline Data Collection: Enabled.\n");
706: else
707: pout("\t\t\t\t\tAuto Offline Data Collection: Disabled.\n");
708:
709: return;
710: }
711:
712: static void PrintSmartSelfExecStatus(const ata_smart_values * data,
1.1.1.3 misho 713: firmwarebug_defs firmwarebugs)
1.1 misho 714: {
715: pout("Self-test execution status: ");
716:
717: switch (data->self_test_exec_status >> 4)
718: {
719: case 0:
720: pout("(%4d)\tThe previous self-test routine completed\n\t\t\t\t\t",
721: (int)data->self_test_exec_status);
722: pout("without error or no self-test has ever \n\t\t\t\t\tbeen run.\n");
723: break;
724: case 1:
725: pout("(%4d)\tThe self-test routine was aborted by\n\t\t\t\t\t",
726: (int)data->self_test_exec_status);
727: pout("the host.\n");
728: break;
729: case 2:
730: pout("(%4d)\tThe self-test routine was interrupted\n\t\t\t\t\t",
731: (int)data->self_test_exec_status);
732: pout("by the host with a hard or soft reset.\n");
733: break;
734: case 3:
735: pout("(%4d)\tA fatal error or unknown test error\n\t\t\t\t\t",
736: (int)data->self_test_exec_status);
737: pout("occurred while the device was executing\n\t\t\t\t\t");
738: pout("its self-test routine and the device \n\t\t\t\t\t");
739: pout("was unable to complete the self-test \n\t\t\t\t\t");
740: pout("routine.\n");
741: break;
742: case 4:
743: pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
744: (int)data->self_test_exec_status);
745: pout("a test element that failed and the test\n\t\t\t\t\t");
746: pout("element that failed is not known.\n");
747: break;
748: case 5:
749: pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
750: (int)data->self_test_exec_status);
751: pout("the electrical element of the test\n\t\t\t\t\t");
752: pout("failed.\n");
753: break;
754: case 6:
755: pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
756: (int)data->self_test_exec_status);
757: pout("the servo (and/or seek) element of the \n\t\t\t\t\t");
758: pout("test failed.\n");
759: break;
760: case 7:
761: pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
762: (int)data->self_test_exec_status);
763: pout("the read element of the test failed.\n");
764: break;
765: case 8:
766: pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
767: (int)data->self_test_exec_status);
768: pout("a test element that failed and the\n\t\t\t\t\t");
769: pout("device is suspected of having handling\n\t\t\t\t\t");
770: pout("damage.\n");
771: break;
772: case 15:
1.1.1.3 misho 773: if (firmwarebugs.is_set(BUG_SAMSUNG3) && data->self_test_exec_status == 0xf0) {
1.1 misho 774: pout("(%4d)\tThe previous self-test routine completed\n\t\t\t\t\t",
775: (int)data->self_test_exec_status);
776: pout("with unknown result or self-test in\n\t\t\t\t\t");
777: pout("progress with less than 10%% remaining.\n");
778: }
779: else {
780: pout("(%4d)\tSelf-test routine in progress...\n\t\t\t\t\t",
781: (int)data->self_test_exec_status);
782: pout("%1d0%% of test remaining.\n",
783: (int)(data->self_test_exec_status & 0x0f));
784: }
785: break;
786: default:
787: pout("(%4d)\tReserved.\n",
788: (int)data->self_test_exec_status);
789: break;
790: }
791:
792: }
793:
794: static void PrintSmartTotalTimeCompleteOffline (const ata_smart_values * data)
795: {
796: pout("Total time to complete Offline \n");
797: pout("data collection: \t\t(%5d) seconds.\n",
798: (int)data->total_time_to_complete_off_line);
799: }
800:
801: static void PrintSmartOfflineCollectCap(const ata_smart_values *data)
802: {
803: pout("Offline data collection\n");
804: pout("capabilities: \t\t\t (0x%02x) ",
805: (int)data->offline_data_collection_capability);
806:
807: if (data->offline_data_collection_capability == 0x00){
808: pout("\tOffline data collection not supported.\n");
809: }
810: else {
811: pout( "%s\n", isSupportExecuteOfflineImmediate(data)?
812: "SMART execute Offline immediate." :
813: "No SMART execute Offline immediate.");
814:
815: pout( "\t\t\t\t\t%s\n", isSupportAutomaticTimer(data)?
816: "Auto Offline data collection on/off support.":
817: "No Auto Offline data collection support.");
818:
819: pout( "\t\t\t\t\t%s\n", isSupportOfflineAbort(data)?
820: "Abort Offline collection upon new\n\t\t\t\t\tcommand.":
821: "Suspend Offline collection upon new\n\t\t\t\t\tcommand.");
822:
823: pout( "\t\t\t\t\t%s\n", isSupportOfflineSurfaceScan(data)?
824: "Offline surface scan supported.":
825: "No Offline surface scan supported.");
826:
827: pout( "\t\t\t\t\t%s\n", isSupportSelfTest(data)?
828: "Self-test supported.":
829: "No Self-test supported.");
830:
831: pout( "\t\t\t\t\t%s\n", isSupportConveyanceSelfTest(data)?
832: "Conveyance Self-test supported.":
833: "No Conveyance Self-test supported.");
834:
835: pout( "\t\t\t\t\t%s\n", isSupportSelectiveSelfTest(data)?
836: "Selective Self-test supported.":
837: "No Selective Self-test supported.");
838: }
839: }
840:
841: static void PrintSmartCapability(const ata_smart_values *data)
842: {
843: pout("SMART capabilities: ");
844: pout("(0x%04x)\t", (int)data->smart_capability);
845:
846: if (data->smart_capability == 0x00)
847: {
848: pout("Automatic saving of SMART data\t\t\t\t\tis not implemented.\n");
849: }
850: else
851: {
852:
853: pout( "%s\n", (data->smart_capability & 0x01)?
854: "Saves SMART data before entering\n\t\t\t\t\tpower-saving mode.":
855: "Does not save SMART data before\n\t\t\t\t\tentering power-saving mode.");
856:
857: if ( data->smart_capability & 0x02 )
858: {
859: pout("\t\t\t\t\tSupports SMART auto save timer.\n");
860: }
861: }
862: }
863:
864: static void PrintSmartErrorLogCapability(const ata_smart_values * data, const ata_identify_device * identity)
865: {
866: pout("Error logging capability: ");
867:
868: if ( isSmartErrorLogCapable(data, identity) )
869: {
870: pout(" (0x%02x)\tError logging supported.\n",
871: (int)data->errorlog_capability);
872: }
873: else {
874: pout(" (0x%02x)\tError logging NOT supported.\n",
875: (int)data->errorlog_capability);
876: }
877: }
878:
879: static void PrintSmartShortSelfTestPollingTime(const ata_smart_values * data)
880: {
881: pout("Short self-test routine \n");
882: if (isSupportSelfTest(data))
883: pout("recommended polling time: \t (%4d) minutes.\n",
884: (int)data->short_test_completion_time);
885: else
886: pout("recommended polling time: \t Not Supported.\n");
887: }
888:
889: static void PrintSmartExtendedSelfTestPollingTime(const ata_smart_values * data)
890: {
891: pout("Extended self-test routine\n");
892: if (isSupportSelfTest(data))
893: pout("recommended polling time: \t (%4d) minutes.\n",
1.1.1.2 misho 894: TestTime(data, EXTEND_SELF_TEST));
1.1 misho 895: else
896: pout("recommended polling time: \t Not Supported.\n");
897: }
898:
899: static void PrintSmartConveyanceSelfTestPollingTime(const ata_smart_values * data)
900: {
901: pout("Conveyance self-test routine\n");
902: if (isSupportConveyanceSelfTest(data))
903: pout("recommended polling time: \t (%4d) minutes.\n",
904: (int)data->conveyance_test_completion_time);
905: else
906: pout("recommended polling time: \t Not Supported.\n");
907: }
908:
909: // Check SMART attribute table for Threshold failure
910: // onlyfailed=0: are or were any age or prefailure attributes <= threshold
911: // onlyfailed=1: are any prefailure attributes <= threshold now
912: static int find_failed_attr(const ata_smart_values * data,
913: const ata_smart_thresholds_pvt * thresholds,
914: const ata_vendor_attr_defs & defs, int onlyfailed)
915: {
916: for (int i = 0; i < NUMBER_ATA_SMART_ATTRIBUTES; i++) {
917: const ata_smart_attribute & attr = data->vendor_attributes[i];
918:
919: ata_attr_state state = ata_get_attr_state(attr, i, thresholds->thres_entries, defs);
920:
921: if (!onlyfailed) {
922: if (state >= ATTRSTATE_FAILED_PAST)
923: return attr.id;
924: }
925: else {
926: if (state == ATTRSTATE_FAILED_NOW && ATTRIBUTE_FLAGS_PREFAILURE(attr.flags))
927: return attr.id;
928: }
929: }
930: return 0;
931: }
932:
933: // onlyfailed=0 : print all attribute values
934: // onlyfailed=1: just ones that are currently failed and have prefailure bit set
935: // onlyfailed=2: ones that are failed, or have failed with or without prefailure bit set
936: static void PrintSmartAttribWithThres(const ata_smart_values * data,
937: const ata_smart_thresholds_pvt * thresholds,
1.1.1.3 misho 938: const ata_vendor_attr_defs & defs, int rpm,
1.1 misho 939: int onlyfailed, unsigned char format)
940: {
1.1.1.2 misho 941: bool brief = !!(format & ata_print_options::FMT_BRIEF);
942: bool hexid = !!(format & ata_print_options::FMT_HEX_ID);
943: bool hexval = !!(format & ata_print_options::FMT_HEX_VAL);
1.1 misho 944: bool needheader = true;
945:
946: // step through all vendor attributes
947: for (int i = 0; i < NUMBER_ATA_SMART_ATTRIBUTES; i++) {
948: const ata_smart_attribute & attr = data->vendor_attributes[i];
949:
950: // Check attribute and threshold
951: unsigned char threshold = 0;
952: ata_attr_state state = ata_get_attr_state(attr, i, thresholds->thres_entries, defs, &threshold);
953: if (state == ATTRSTATE_NON_EXISTING)
954: continue;
955:
956: // These break out of the loop if we are only printing certain entries...
957: if (onlyfailed == 1 && !(ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) && state == ATTRSTATE_FAILED_NOW))
958: continue;
959:
960: if (onlyfailed == 2 && state < ATTRSTATE_FAILED_PAST)
961: continue;
962:
963: // print header only if needed
964: if (needheader) {
965: if (!onlyfailed) {
966: pout("SMART Attributes Data Structure revision number: %d\n",(int)data->revnumber);
967: pout("Vendor Specific SMART Attributes with Thresholds:\n");
968: }
1.1.1.2 misho 969: if (!brief)
970: pout("ID#%s ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE\n",
971: (!hexid ? "" : " "));
1.1 misho 972: else
1.1.1.2 misho 973: pout("ID#%s ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n",
974: (!hexid ? "" : " "));
1.1 misho 975: needheader = false;
976: }
977:
978: // Format value, worst, threshold
979: std::string valstr, worstr, threstr;
980: if (state > ATTRSTATE_NO_NORMVAL)
1.1.1.2 misho 981: valstr = (!hexval ? strprintf("%.3d", attr.current)
982: : strprintf("0x%02x", attr.current));
1.1 misho 983: else
1.1.1.2 misho 984: valstr = (!hexval ? "---" : "----");
1.1 misho 985: if (!(defs[attr.id].flags & ATTRFLAG_NO_WORSTVAL))
1.1.1.2 misho 986: worstr = (!hexval ? strprintf("%.3d", attr.worst)
987: : strprintf("0x%02x", attr.worst));
1.1 misho 988: else
1.1.1.2 misho 989: worstr = (!hexval ? "---" : "----");
1.1 misho 990: if (state > ATTRSTATE_NO_THRESHOLD)
1.1.1.2 misho 991: threstr = (!hexval ? strprintf("%.3d", threshold)
992: : strprintf("0x%02x", threshold));
1.1 misho 993: else
1.1.1.2 misho 994: threstr = (!hexval ? "---" : "----");
1.1 misho 995:
996: // Print line for each valid attribute
1.1.1.2 misho 997: std::string idstr = (!hexid ? strprintf("%3d", attr.id)
998: : strprintf("0x%02x", attr.id));
1.1.1.3 misho 999: std::string attrname = ata_get_smart_attr_name(attr.id, defs, rpm);
1.1 misho 1000: std::string rawstr = ata_format_attr_raw_value(attr, defs);
1001:
1.1.1.2 misho 1002: if (!brief)
1003: pout("%s %-24s0x%04x %-4s %-4s %-4s %-10s%-9s%-12s%s\n",
1004: idstr.c_str(), attrname.c_str(), attr.flags,
1.1 misho 1005: valstr.c_str(), worstr.c_str(), threstr.c_str(),
1006: (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) ? "Pre-fail" : "Old_age"),
1007: (ATTRIBUTE_FLAGS_ONLINE(attr.flags) ? "Always" : "Offline"),
1008: (state == ATTRSTATE_FAILED_NOW ? "FAILING_NOW" :
1009: state == ATTRSTATE_FAILED_PAST ? "In_the_past"
1010: : " -" ) ,
1011: rawstr.c_str());
1012: else
1.1.1.2 misho 1013: pout("%s %-24s%c%c%c%c%c%c%c %-4s %-4s %-4s %-5s%s\n",
1014: idstr.c_str(), attrname.c_str(),
1.1 misho 1015: (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) ? 'P' : '-'),
1016: (ATTRIBUTE_FLAGS_ONLINE(attr.flags) ? 'O' : '-'),
1017: (ATTRIBUTE_FLAGS_PERFORMANCE(attr.flags) ? 'S' : '-'),
1018: (ATTRIBUTE_FLAGS_ERRORRATE(attr.flags) ? 'R' : '-'),
1019: (ATTRIBUTE_FLAGS_EVENTCOUNT(attr.flags) ? 'C' : '-'),
1020: (ATTRIBUTE_FLAGS_SELFPRESERVING(attr.flags) ? 'K' : '-'),
1021: (ATTRIBUTE_FLAGS_OTHER(attr.flags) ? '+' : ' '),
1022: valstr.c_str(), worstr.c_str(), threstr.c_str(),
1023: (state == ATTRSTATE_FAILED_NOW ? "NOW" :
1024: state == ATTRSTATE_FAILED_PAST ? "Past"
1025: : "-" ),
1026: rawstr.c_str());
1027:
1028: }
1029:
1030: if (!needheader) {
1.1.1.2 misho 1031: if (!onlyfailed && brief) {
1032: int n = (!hexid ? 28 : 29);
1033: pout("%*s||||||_ K auto-keep\n"
1034: "%*s|||||__ C event count\n"
1035: "%*s||||___ R error rate\n"
1036: "%*s|||____ S speed/performance\n"
1037: "%*s||_____ O updated online\n"
1038: "%*s|______ P prefailure warning\n",
1039: n, "", n, "", n, "", n, "", n, "", n, "");
1040: }
1.1 misho 1041: pout("\n");
1042: }
1043: }
1044:
1045: // Print SMART related SCT capabilities
1046: static void ataPrintSCTCapability(const ata_identify_device *drive)
1047: {
1048: unsigned short sctcaps = drive->words088_255[206-88];
1049: if (!(sctcaps & 0x01))
1050: return;
1051: pout("SCT capabilities: \t (0x%04x)\tSCT Status supported.\n", sctcaps);
1052: if (sctcaps & 0x08)
1053: pout("\t\t\t\t\tSCT Error Recovery Control supported.\n");
1054: if (sctcaps & 0x10)
1055: pout("\t\t\t\t\tSCT Feature Control supported.\n");
1056: if (sctcaps & 0x20)
1057: pout("\t\t\t\t\tSCT Data Table supported.\n");
1058: }
1059:
1060:
1061: static void PrintGeneralSmartValues(const ata_smart_values *data, const ata_identify_device *drive,
1.1.1.3 misho 1062: firmwarebug_defs firmwarebugs)
1.1 misho 1063: {
1064: pout("General SMART Values:\n");
1065:
1066: PrintSmartOfflineStatus(data);
1067:
1068: if (isSupportSelfTest(data)){
1.1.1.3 misho 1069: PrintSmartSelfExecStatus(data, firmwarebugs);
1.1 misho 1070: }
1071:
1072: PrintSmartTotalTimeCompleteOffline(data);
1073: PrintSmartOfflineCollectCap(data);
1074: PrintSmartCapability(data);
1075:
1076: PrintSmartErrorLogCapability(data, drive);
1077:
1078: pout( "\t\t\t\t\t%s\n", isGeneralPurposeLoggingCapable(drive)?
1079: "General Purpose Logging supported.":
1080: "No General Purpose Logging support.");
1081:
1082: if (isSupportSelfTest(data)){
1083: PrintSmartShortSelfTestPollingTime (data);
1084: PrintSmartExtendedSelfTestPollingTime (data);
1085: }
1086: if (isSupportConveyanceSelfTest(data))
1087: PrintSmartConveyanceSelfTestPollingTime (data);
1088:
1089: ataPrintSCTCapability(drive);
1090:
1091: pout("\n");
1092: }
1093:
1094: // Get # sectors of a log addr, 0 if log does not exist.
1095: static unsigned GetNumLogSectors(const ata_smart_log_directory * logdir, unsigned logaddr, bool gpl)
1096: {
1097: if (!logdir)
1098: return 0;
1099: if (logaddr > 0xff)
1100: return 0;
1101: if (logaddr == 0)
1102: return 1;
1103: unsigned n = logdir->entry[logaddr-1].numsectors;
1104: if (gpl)
1105: // GP logs may have >255 sectors
1106: n |= logdir->entry[logaddr-1].reserved << 8;
1107: return n;
1108: }
1109:
1110: // Get name of log.
1.1.1.3 misho 1111: // Table A.2 of T13/2161-D (ACS-3) Revision 4, September 4, 2012
1.1 misho 1112: static const char * GetLogName(unsigned logaddr)
1113: {
1114: switch (logaddr) {
1115: case 0x00: return "Log Directory";
1116: case 0x01: return "Summary SMART error log";
1117: case 0x02: return "Comprehensive SMART error log";
1118: case 0x03: return "Ext. Comprehensive SMART error log";
1119: case 0x04: return "Device Statistics log";
1.1.1.3 misho 1120: case 0x05: return "Reserved for CFA"; // ACS-2
1.1 misho 1121: case 0x06: return "SMART self-test log";
1122: case 0x07: return "Extended self-test log";
1123: case 0x08: return "Power Conditions log"; // ACS-2
1124: case 0x09: return "Selective self-test log";
1.1.1.3 misho 1125: case 0x0a: return "Device Statistics Notification"; // ACS-3
1126: case 0x0b: return "Reserved for CFA"; // ACS-3
1127:
1.1 misho 1128: case 0x0d: return "LPS Mis-alignment log"; // ACS-2
1.1.1.3 misho 1129:
1.1 misho 1130: case 0x10: return "NCQ Command Error log";
1131: case 0x11: return "SATA Phy Event Counters";
1.1.1.2 misho 1132: case 0x12: return "SATA NCQ Queue Management log"; // ACS-3
1133: case 0x13: return "SATA NCQ Send and Receive log"; // ACS-3
1134: case 0x14:
1135: case 0x15:
1136: case 0x16: return "Reserved for Serial ATA";
1.1.1.3 misho 1137:
1.1 misho 1138: case 0x19: return "LBA Status log"; // ACS-3
1.1.1.3 misho 1139:
1140: case 0x20: return "Streaming performance log [OBS-8]";
1.1 misho 1141: case 0x21: return "Write stream error log";
1142: case 0x22: return "Read stream error log";
1.1.1.3 misho 1143: case 0x23: return "Delayed sector log [OBS-8]";
1.1.1.2 misho 1144: case 0x24: return "Current Device Internal Status Data log"; // ACS-3
1145: case 0x25: return "Saved Device Internal Status Data log"; // ACS-3
1.1.1.3 misho 1146:
1.1 misho 1147: case 0x30: return "IDENTIFY DEVICE data log"; // ACS-3
1.1.1.3 misho 1148:
1.1 misho 1149: case 0xe0: return "SCT Command/Status";
1150: case 0xe1: return "SCT Data Transfer";
1151: default:
1152: if (0xa0 <= logaddr && logaddr <= 0xdf)
1153: return "Device vendor specific log";
1154: if (0x80 <= logaddr && logaddr <= 0x9f)
1155: return "Host vendor specific log";
1156: return "Reserved";
1157: }
1158: /*NOTREACHED*/
1159: }
1160:
1.1.1.3 misho 1161: // Get log access permissions
1162: static const char * get_log_rw(unsigned logaddr)
1163: {
1164: if ( ( logaddr <= 0x08)
1165: || (0x0d == logaddr)
1166: || (0x10 <= logaddr && logaddr <= 0x13)
1167: || (0x19 == logaddr)
1168: || (0x20 <= logaddr && logaddr <= 0x25)
1169: || (0x30 == logaddr))
1170: return "R/O";
1171:
1172: if ( (0x09 <= logaddr && logaddr <= 0x0a)
1173: || (0x80 <= logaddr && logaddr <= 0x9f)
1174: || (0xe0 <= logaddr && logaddr <= 0xe1))
1175: return "R/W";
1176:
1177: if (0xa0 <= logaddr && logaddr <= 0xdf)
1178: return "VS"; // Vendor specific
1179:
1180: return "-"; // Unknown/Reserved
1181: }
1182:
1183: // Init a fake log directory, assume that standard logs are supported
1184: const ata_smart_log_directory * fake_logdir(ata_smart_log_directory * logdir,
1185: const ata_print_options & options)
1186: {
1187: memset(logdir, 0, sizeof(*logdir));
1188: logdir->logversion = 255;
1189: logdir->entry[0x01-1].numsectors = 1;
1190: logdir->entry[0x03-1].numsectors = (options.smart_ext_error_log + (4-1)) / 4;
1191: logdir->entry[0x04-1].numsectors = 8;
1192: logdir->entry[0x06-1].numsectors = 1;
1193: logdir->entry[0x07-1].numsectors = (options.smart_ext_selftest_log + (19-1)) / 19;
1194: logdir->entry[0x09-1].numsectors = 1;
1195: logdir->entry[0x11-1].numsectors = 1;
1196: return logdir;
1197: }
1198:
1.1 misho 1199: // Print SMART and/or GP Log Directory
1200: static void PrintLogDirectories(const ata_smart_log_directory * gplogdir,
1201: const ata_smart_log_directory * smartlogdir)
1202: {
1203: if (gplogdir)
1204: pout("General Purpose Log Directory Version %u\n", gplogdir->logversion);
1205: if (smartlogdir)
1206: pout("SMART %sLog Directory Version %u%s\n",
1207: (gplogdir ? " " : ""), smartlogdir->logversion,
1208: (smartlogdir->logversion==1 ? " [multi-sector log support]" : ""));
1209:
1.1.1.3 misho 1210: pout("Address Access R/W Size Description\n");
1211:
1.1 misho 1212: for (unsigned i = 0; i <= 0xff; i++) {
1213: // Get number of sectors
1214: unsigned smart_numsect = GetNumLogSectors(smartlogdir, i, false);
1215: unsigned gp_numsect = GetNumLogSectors(gplogdir , i, true );
1216:
1217: if (!(smart_numsect || gp_numsect))
1218: continue; // Log does not exist
1219:
1.1.1.3 misho 1220: const char * acc; unsigned size;
1221: if (smart_numsect == gp_numsect) {
1222: acc = "GPL,SL"; size = gp_numsect;
1223: }
1224: else if (!smart_numsect) {
1225: acc = "GPL"; size = gp_numsect;
1226: }
1227: else if (!gp_numsect) {
1228: acc = " SL"; size = smart_numsect;
1229: }
1230: else {
1231: acc = 0; size = 0;
1232: }
1233:
1234: unsigned i2 = i;
1235: if (acc && ((0x80 <= i && i < 0x9f) || (0xa0 <= i && i < 0xdf))) {
1236: // Find range of Host/Device vendor specific logs with same size
1237: unsigned imax = (i < 0x9f ? 0x9f : 0xdf);
1238: for (unsigned j = i+1; j <= imax; j++) {
1239: unsigned sn = GetNumLogSectors(smartlogdir, j, false);
1240: unsigned gn = GetNumLogSectors(gplogdir , j, true );
1241:
1242: if (!(sn == smart_numsect && gn == gp_numsect))
1243: break;
1244: i2 = j;
1245: }
1246: }
1247:
1.1 misho 1248: const char * name = GetLogName(i);
1.1.1.3 misho 1249: const char * rw = get_log_rw(i);
1.1 misho 1250:
1.1.1.3 misho 1251: if (i2 > i) {
1252: pout("0x%02x-0x%02x %-6s %-3s %5u %s\n", i, i2, acc, rw, size, name);
1253: i = i2;
1254: }
1255: else if (acc)
1256: pout( "0x%02x %-6s %-3s %5u %s\n", i, acc, rw, size, name);
1.1 misho 1257: else {
1.1.1.3 misho 1258: // GPL and SL support different sizes
1259: pout( "0x%02x %-6s %-3s %5u %s\n", i, "GPL", rw, gp_numsect, name);
1260: pout( "0x%02x %-6s %-3s %5u %s\n", i, "SL", rw, smart_numsect, name);
1.1 misho 1261: }
1262: }
1263: pout("\n");
1264: }
1265:
1266: // Print hexdump of log pages.
1267: // Format is compatible with 'xxd -r'.
1268: static void PrintLogPages(const char * type, const unsigned char * data,
1269: unsigned char logaddr, unsigned page,
1270: unsigned num_pages, unsigned max_pages)
1271: {
1272: pout("%s Log 0x%02x [%s], Page %u-%u (of %u)\n",
1273: type, logaddr, GetLogName(logaddr), page, page+num_pages-1, max_pages);
1274: for (unsigned i = 0; i < num_pages * 512; i += 16) {
1275: const unsigned char * p = data+i;
1276: pout("%07x: %02x %02x %02x %02x %02x %02x %02x %02x "
1277: "%02x %02x %02x %02x %02x %02x %02x %02x ",
1278: (page * 512) + i,
1279: p[ 0], p[ 1], p[ 2], p[ 3], p[ 4], p[ 5], p[ 6], p[ 7],
1280: p[ 8], p[ 9], p[10], p[11], p[12], p[13], p[14], p[15]);
1281: #define P(n) (' ' <= p[n] && p[n] <= '~' ? (int)p[n] : '.')
1282: pout("|%c%c%c%c%c%c%c%c"
1283: "%c%c%c%c%c%c%c%c|\n",
1284: P( 0), P( 1), P( 2), P( 3), P( 4), P( 5), P( 6), P( 7),
1285: P( 8), P( 9), P(10), P(11), P(12), P(13), P(14), P(15));
1286: #undef P
1287: if ((i & 0x1ff) == 0x1f0)
1288: pout("\n");
1289: }
1290: }
1291:
1292: ///////////////////////////////////////////////////////////////////////
1293: // Device statistics (Log 0x04)
1294:
1295: // See Section A.5 of
1296: // ATA/ATAPI Command Set - 3 (ACS-3)
1.1.1.2 misho 1297: // T13/2161-D Revision 2, February 21, 2012.
1.1 misho 1298:
1299: struct devstat_entry_info
1300: {
1301: short size; // #bytes of value, -1 for signed char
1302: const char * name;
1303: };
1304:
1305: const devstat_entry_info devstat_info_0x00[] = {
1306: { 2, "List of supported log pages" },
1307: { 0, 0 }
1308: };
1309:
1310: const devstat_entry_info devstat_info_0x01[] = {
1311: { 2, "General Statistics" },
1312: { 4, "Lifetime Power-On Resets" },
1313: { 4, "Power-on Hours" }, // spec says no flags(?)
1314: { 6, "Logical Sectors Written" },
1315: { 6, "Number of Write Commands" },
1316: { 6, "Logical Sectors Read" },
1317: { 6, "Number of Read Commands" },
1.1.1.2 misho 1318: { 6, "Date and Time TimeStamp" }, // ACS-3
1.1 misho 1319: { 0, 0 }
1320: };
1321:
1322: const devstat_entry_info devstat_info_0x02[] = {
1.1.1.2 misho 1323: { 2, "Free-Fall Statistics" },
1.1 misho 1324: { 4, "Number of Free-Fall Events Detected" },
1325: { 4, "Overlimit Shock Events" },
1326: { 0, 0 }
1327: };
1328:
1329: const devstat_entry_info devstat_info_0x03[] = {
1330: { 2, "Rotating Media Statistics" },
1331: { 4, "Spindle Motor Power-on Hours" },
1332: { 4, "Head Flying Hours" },
1333: { 4, "Head Load Events" },
1334: { 4, "Number of Reallocated Logical Sectors" },
1335: { 4, "Read Recovery Attempts" },
1336: { 4, "Number of Mechanical Start Failures" },
1337: { 4, "Number of Realloc. Candidate Logical Sectors" }, // ACS-3
1338: { 0, 0 }
1339: };
1340:
1341: const devstat_entry_info devstat_info_0x04[] = {
1342: { 2, "General Errors Statistics" },
1343: { 4, "Number of Reported Uncorrectable Errors" },
1344: //{ 4, "Number of Resets Between Command Acceptance and Command Completion" },
1345: { 4, "Resets Between Cmd Acceptance and Completion" },
1346: { 0, 0 }
1347: };
1348:
1349: const devstat_entry_info devstat_info_0x05[] = {
1350: { 2, "Temperature Statistics" },
1351: { -1, "Current Temperature" },
1352: { -1, "Average Short Term Temperature" },
1353: { -1, "Average Long Term Temperature" },
1354: { -1, "Highest Temperature" },
1355: { -1, "Lowest Temperature" },
1356: { -1, "Highest Average Short Term Temperature" },
1357: { -1, "Lowest Average Short Term Temperature" },
1358: { -1, "Highest Average Long Term Temperature" },
1359: { -1, "Lowest Average Long Term Temperature" },
1360: { 4, "Time in Over-Temperature" },
1361: { -1, "Specified Maximum Operating Temperature" },
1362: { 4, "Time in Under-Temperature" },
1363: { -1, "Specified Minimum Operating Temperature" },
1364: { 0, 0 }
1365: };
1366:
1367: const devstat_entry_info devstat_info_0x06[] = {
1368: { 2, "Transport Statistics" },
1369: { 4, "Number of Hardware Resets" },
1370: { 4, "Number of ASR Events" },
1371: { 4, "Number of Interface CRC Errors" },
1372: { 0, 0 }
1373: };
1374:
1375: const devstat_entry_info devstat_info_0x07[] = {
1376: { 2, "Solid State Device Statistics" },
1377: { 1, "Percentage Used Endurance Indicator" },
1378: { 0, 0 }
1379: };
1380:
1381: const devstat_entry_info * devstat_infos[] = {
1382: devstat_info_0x00,
1383: devstat_info_0x01,
1384: devstat_info_0x02,
1385: devstat_info_0x03,
1386: devstat_info_0x04,
1387: devstat_info_0x05,
1388: devstat_info_0x06,
1389: devstat_info_0x07
1390: };
1391:
1392: const int num_devstat_infos = sizeof(devstat_infos)/sizeof(devstat_infos[0]);
1393:
1394: static void print_device_statistics_page(const unsigned char * data, int page,
1395: bool & need_trailer)
1396: {
1397: const devstat_entry_info * info = (page < num_devstat_infos ? devstat_infos[page] : 0);
1398: const char * name = (info ? info[0].name : "Unknown Statistics");
1399:
1400: // Check page number in header
1401: static const char line[] = " ===== = = == ";
1402: if (!data[2]) {
1403: pout("%3d%s%s (empty) ==\n", page, line, name);
1404: return;
1405: }
1406: if (data[2] != page) {
1407: pout("%3d%s%s (invalid page %d in header) ==\n", page, line, name, data[2]);
1408: return;
1409: }
1410:
1411: pout("%3d%s%s (rev %d) ==\n", page, line, name, data[0]);
1412:
1413: // Print entries
1414: for (int i = 1, offset = 8; offset < 512-7; i++, offset+=8) {
1415: // Check for last known entry
1416: if (info && !info[i].size)
1417: info = 0;
1418:
1419: // Skip unsupported entries
1420: unsigned char flags = data[offset+7];
1421: if (!(flags & 0x80))
1422: continue;
1423:
1424: // Get value size, default to max if unknown
1425: int size = (info ? info[i].size : 7);
1426:
1427: // Format value
1428: char valstr[32];
1429: if (flags & 0x40) { // valid flag
1430: // Get value
1431: int64_t val;
1432: if (size < 0) {
1433: val = (signed char)data[offset];
1434: }
1435: else {
1436: val = 0;
1437: for (int j = 0; j < size; j++)
1438: val |= (int64_t)data[offset+j] << (j*8);
1439: }
1440: snprintf(valstr, sizeof(valstr), "%"PRId64, val);
1441: }
1442: else {
1443: // Value not known (yet)
1.1.1.3 misho 1444: valstr[0] = '-'; valstr[1] = 0;
1.1 misho 1445: }
1446:
1447: pout("%3d 0x%03x %d%c %15s%c %s\n",
1448: page, offset,
1449: abs(size),
1450: (flags & 0x1f ? '+' : ' '), // unknown flags
1451: valstr,
1452: (flags & 0x20 ? '~' : ' '), // normalized flag
1453: (info ? info[i].name : "Unknown"));
1454: if (flags & 0x20)
1455: need_trailer = true;
1456: }
1457: }
1458:
1459: static bool print_device_statistics(ata_device * device, unsigned nsectors,
1460: const std::vector<int> & single_pages, bool all_pages, bool ssd_page)
1461: {
1462: // Read list of supported pages from page 0
1463: unsigned char page_0[512] = {0, };
1.1.1.3 misho 1464: if (!ataReadLogExt(device, 0x04, 0, 0, page_0, 1)) {
1465: pout("Read Device Statistics page 0 failed\n\n");
1.1 misho 1466: return false;
1.1.1.3 misho 1467: }
1.1 misho 1468:
1469: unsigned char nentries = page_0[8];
1470: if (!(page_0[2] == 0 && nentries > 0)) {
1.1.1.3 misho 1471: pout("Device Statistics page 0 is invalid (page=%d, nentries=%d)\n\n", page_0[2], nentries);
1.1 misho 1472: return false;
1473: }
1474:
1475: // Prepare list of pages to print
1476: std::vector<int> pages;
1477: unsigned i;
1478: if (all_pages) {
1479: // Add all supported pages
1480: for (i = 0; i < nentries; i++) {
1481: int page = page_0[8+1+i];
1482: if (page)
1483: pages.push_back(page);
1484: }
1485: ssd_page = false;
1486: }
1487: // Add manually specified pages
1488: bool print_page_0 = false;
1489: for (i = 0; i < single_pages.size() || ssd_page; i++) {
1490: int page = (i < single_pages.size() ? single_pages[i] : 7);
1491: if (!page)
1492: print_page_0 = true;
1493: else if (page >= (int)nsectors)
1494: pout("Device Statistics Log has only %u pages\n", nsectors);
1495: else
1496: pages.push_back(page);
1497: if (page == 7)
1498: ssd_page = false;
1499: }
1500:
1501: // Print list of supported pages if requested
1502: if (print_page_0) {
1503: pout("Device Statistics (GP Log 0x04) supported pages\n");
1504: pout("Page Description\n");
1505: for (i = 0; i < nentries; i++) {
1506: int page = page_0[8+1+i];
1507: pout("%3d %s\n", page,
1508: (page < num_devstat_infos ? devstat_infos[page][0].name : "Unknown Statistics"));
1509: }
1510: pout("\n");
1511: }
1512:
1513: // Read & print pages
1514: if (!pages.empty()) {
1515: pout("Device Statistics (GP Log 0x04)\n");
1516: pout("Page Offset Size Value Description\n");
1517: bool need_trailer = false;
1518:
1519: for (i = 0; i < pages.size(); i++) {
1520: int page = pages[i];
1521: unsigned char page_n[512] = {0, };
1.1.1.3 misho 1522: if (!ataReadLogExt(device, 0x04, 0, page, page_n, 1)) {
1523: pout("Read Device Statistics page %d failed\n\n", page);
1.1 misho 1524: return false;
1.1.1.3 misho 1525: }
1.1 misho 1526: print_device_statistics_page(page_n, page, need_trailer);
1527: }
1528:
1529: if (need_trailer)
1530: pout("%30s|_ ~ normalized value\n", "");
1531: pout("\n");
1532: }
1533:
1534: return true;
1535: }
1536:
1537:
1538: ///////////////////////////////////////////////////////////////////////
1539:
1540: // Print log 0x11
1541: static void PrintSataPhyEventCounters(const unsigned char * data, bool reset)
1542: {
1543: if (checksum(data))
1544: checksumwarning("SATA Phy Event Counters");
1545: pout("SATA Phy Event Counters (GP Log 0x11)\n");
1546: if (data[0] || data[1] || data[2] || data[3])
1547: pout("[Reserved: 0x%02x 0x%02x 0x%02x 0x%02x]\n",
1548: data[0], data[1], data[2], data[3]);
1549: pout("ID Size Value Description\n");
1550:
1551: for (unsigned i = 4; ; ) {
1552: // Get counter id and size (bits 14:12)
1553: unsigned id = data[i] | (data[i+1] << 8);
1554: unsigned size = ((id >> 12) & 0x7) << 1;
1555: id &= 0x8fff;
1556:
1557: // End of counter table ?
1558: if (!id)
1559: break;
1560: i += 2;
1561:
1562: if (!(2 <= size && size <= 8 && i + size < 512)) {
1563: pout("0x%04x %u: Invalid entry\n", id, size);
1564: break;
1565: }
1566:
1567: // Get value
1568: uint64_t val = 0, max_val = 0;
1569: for (unsigned j = 0; j < size; j+=2) {
1570: val |= (uint64_t)(data[i+j] | (data[i+j+1] << 8)) << (j*8);
1571: max_val |= (uint64_t)0xffffU << (j*8);
1572: }
1573: i += size;
1574:
1575: // Get name
1576: const char * name;
1577: switch (id) {
1578: case 0x001: name = "Command failed due to ICRC error"; break; // Mandatory
1579: case 0x002: name = "R_ERR response for data FIS"; break;
1580: case 0x003: name = "R_ERR response for device-to-host data FIS"; break;
1581: case 0x004: name = "R_ERR response for host-to-device data FIS"; break;
1582: case 0x005: name = "R_ERR response for non-data FIS"; break;
1583: case 0x006: name = "R_ERR response for device-to-host non-data FIS"; break;
1584: case 0x007: name = "R_ERR response for host-to-device non-data FIS"; break;
1585: case 0x008: name = "Device-to-host non-data FIS retries"; break;
1586: case 0x009: name = "Transition from drive PhyRdy to drive PhyNRdy"; break;
1587: case 0x00A: name = "Device-to-host register FISes sent due to a COMRESET"; break; // Mandatory
1588: case 0x00B: name = "CRC errors within host-to-device FIS"; break;
1589: case 0x00D: name = "Non-CRC errors within host-to-device FIS"; break;
1590: case 0x00F: name = "R_ERR response for host-to-device data FIS, CRC"; break;
1591: case 0x010: name = "R_ERR response for host-to-device data FIS, non-CRC"; break;
1592: case 0x012: name = "R_ERR response for host-to-device non-data FIS, CRC"; break;
1593: case 0x013: name = "R_ERR response for host-to-device non-data FIS, non-CRC"; break;
1594: default: name = (id & 0x8000 ? "Vendor specific" : "Unknown"); break;
1595: }
1596:
1597: // Counters stop at max value, add '+' in this case
1598: pout("0x%04x %u %12"PRIu64"%c %s\n", id, size, val,
1599: (val == max_val ? '+' : ' '), name);
1600: }
1601: if (reset)
1602: pout("All counters reset\n");
1603: pout("\n");
1604: }
1605:
1.1.1.3 misho 1606: // Format milliseconds from error log entry as "DAYS+H:M:S.MSEC"
1607: static std::string format_milliseconds(unsigned msec)
1608: {
1609: unsigned days = msec / 86400000U;
1610: msec -= days * 86400000U;
1611: unsigned hours = msec / 3600000U;
1612: msec -= hours * 3600000U;
1613: unsigned min = msec / 60000U;
1614: msec -= min * 60000U;
1615: unsigned sec = msec / 1000U;
1616: msec -= sec * 1000U;
1617:
1618: std::string str;
1619: if (days)
1620: str = strprintf("%2ud+", days);
1621: str += strprintf("%02u:%02u:%02u.%03u", hours, min, sec, msec);
1622: return str;
1623: }
1624:
1.1 misho 1625: // Get description for 'state' value from SMART Error Logs
1626: static const char * get_error_log_state_desc(unsigned state)
1627: {
1628: state &= 0x0f;
1629: switch (state){
1630: case 0x0: return "in an unknown state";
1631: case 0x1: return "sleeping";
1632: case 0x2: return "in standby mode";
1633: case 0x3: return "active or idle";
1634: case 0x4: return "doing SMART Offline or Self-test";
1635: default:
1636: return (state < 0xb ? "in a reserved state"
1637: : "in a vendor specific state");
1638: }
1639: }
1640:
1641: // returns number of errors
1642: static int PrintSmartErrorlog(const ata_smart_errorlog *data,
1.1.1.3 misho 1643: firmwarebug_defs firmwarebugs)
1.1 misho 1644: {
1645: pout("SMART Error Log Version: %d\n", (int)data->revnumber);
1646:
1647: // if no errors logged, return
1648: if (!data->error_log_pointer){
1649: pout("No Errors Logged\n\n");
1650: return 0;
1651: }
1652: print_on();
1653: // If log pointer out of range, return
1654: if (data->error_log_pointer>5){
1655: pout("Invalid Error Log index = 0x%02x (T13/1321D rev 1c "
1656: "Section 8.41.6.8.2.2 gives valid range from 1 to 5)\n\n",
1657: (int)data->error_log_pointer);
1658: return 0;
1659: }
1660:
1661: // Some internal consistency checking of the data structures
1.1.1.3 misho 1662: if ((data->ata_error_count-data->error_log_pointer) % 5 && !firmwarebugs.is_set(BUG_SAMSUNG2)) {
1.1 misho 1663: pout("Warning: ATA error count %d inconsistent with error log pointer %d\n\n",
1664: data->ata_error_count,data->error_log_pointer);
1665: }
1666:
1667: // starting printing error log info
1668: if (data->ata_error_count<=5)
1669: pout( "ATA Error Count: %d\n", (int)data->ata_error_count);
1670: else
1671: pout( "ATA Error Count: %d (device log contains only the most recent five errors)\n",
1672: (int)data->ata_error_count);
1673: print_off();
1674: pout("\tCR = Command Register [HEX]\n"
1675: "\tFR = Features Register [HEX]\n"
1676: "\tSC = Sector Count Register [HEX]\n"
1677: "\tSN = Sector Number Register [HEX]\n"
1678: "\tCL = Cylinder Low Register [HEX]\n"
1679: "\tCH = Cylinder High Register [HEX]\n"
1680: "\tDH = Device/Head Register [HEX]\n"
1681: "\tDC = Device Command Register [HEX]\n"
1682: "\tER = Error register [HEX]\n"
1683: "\tST = Status register [HEX]\n"
1684: "Powered_Up_Time is measured from power on, and printed as\n"
1685: "DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,\n"
1686: "SS=sec, and sss=millisec. It \"wraps\" after 49.710 days.\n\n");
1687:
1688: // now step through the five error log data structures (table 39 of spec)
1689: for (int k = 4; k >= 0; k-- ) {
1690:
1691: // The error log data structure entries are a circular buffer
1692: int j, i=(data->error_log_pointer+k)%5;
1693: const ata_smart_errorlog_struct * elog = data->errorlog_struct+i;
1694: const ata_smart_errorlog_error_struct * summary = &(elog->error_struct);
1695:
1696: // Spec says: unused error log structures shall be zero filled
1697: if (nonempty(elog, sizeof(*elog))){
1698: // Table 57 of T13/1532D Volume 1 Revision 3
1699: const char *msgstate = get_error_log_state_desc(summary->state);
1700: int days = (int)summary->timestamp/24;
1701:
1702: // See table 42 of ATA5 spec
1703: print_on();
1704: pout("Error %d occurred at disk power-on lifetime: %d hours (%d days + %d hours)\n",
1705: (int)(data->ata_error_count+k-4), (int)summary->timestamp, days, (int)(summary->timestamp-24*days));
1706: print_off();
1707: pout(" When the command that caused the error occurred, the device was %s.\n\n",msgstate);
1708: pout(" After command completion occurred, registers were:\n"
1709: " ER ST SC SN CL CH DH\n"
1710: " -- -- -- -- -- -- --\n"
1711: " %02x %02x %02x %02x %02x %02x %02x",
1712: (int)summary->error_register,
1713: (int)summary->status,
1714: (int)summary->sector_count,
1715: (int)summary->sector_number,
1716: (int)summary->cylinder_low,
1717: (int)summary->cylinder_high,
1718: (int)summary->drive_head);
1719: // Add a description of the contents of the status and error registers
1720: // if possible
1.1.1.3 misho 1721: std::string st_er_desc = format_st_er_desc(elog);
1722: if (!st_er_desc.empty())
1723: pout(" %s", st_er_desc.c_str());
1.1 misho 1724: pout("\n\n");
1725: pout(" Commands leading to the command that caused the error were:\n"
1726: " CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name\n"
1727: " -- -- -- -- -- -- -- -- ---------------- --------------------\n");
1728: for ( j = 4; j >= 0; j--){
1729: const ata_smart_errorlog_command_struct * thiscommand = elog->commands+j;
1730:
1731: // Spec says: unused data command structures shall be zero filled
1732: if (nonempty(thiscommand, sizeof(*thiscommand))) {
1733: pout(" %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n",
1734: (int)thiscommand->commandreg,
1735: (int)thiscommand->featuresreg,
1736: (int)thiscommand->sector_count,
1737: (int)thiscommand->sector_number,
1738: (int)thiscommand->cylinder_low,
1739: (int)thiscommand->cylinder_high,
1740: (int)thiscommand->drive_head,
1741: (int)thiscommand->devicecontrolreg,
1.1.1.3 misho 1742: format_milliseconds(thiscommand->timestamp).c_str(),
1.1 misho 1743: look_up_ata_command(thiscommand->commandreg, thiscommand->featuresreg));
1744: }
1745: }
1746: pout("\n");
1747: }
1748: }
1749: print_on();
1750: if (printing_is_switchable)
1751: pout("\n");
1752: print_off();
1753: return data->ata_error_count;
1754: }
1755:
1756: // Print SMART Extended Comprehensive Error Log (GP Log 0x03)
1757: static int PrintSmartExtErrorLog(const ata_smart_exterrlog * log,
1758: unsigned nsectors, unsigned max_errors)
1759: {
1760: pout("SMART Extended Comprehensive Error Log Version: %u (%u sectors)\n",
1761: log->version, nsectors);
1762:
1763: if (!log->device_error_count) {
1764: pout("No Errors Logged\n\n");
1765: return 0;
1766: }
1767: print_on();
1768:
1769: // Check index
1770: unsigned nentries = nsectors * 4;
1771: unsigned erridx = log->error_log_index;
1772: if (!(1 <= erridx && erridx <= nentries)){
1773: // Some Samsung disks (at least SP1614C/SW100-25, HD300LJ/ZT100-12) use the
1774: // former index from Summary Error Log (byte 1, now reserved) and set byte 2-3
1775: // to 0.
1776: if (!(erridx == 0 && 1 <= log->reserved1 && log->reserved1 <= nentries)) {
1777: pout("Invalid Error Log index = 0x%04x (reserved = 0x%02x)\n", erridx, log->reserved1);
1778: return 0;
1779: }
1780: pout("Invalid Error Log index = 0x%04x, trying reserved byte (0x%02x) instead\n", erridx, log->reserved1);
1781: erridx = log->reserved1;
1782: }
1783:
1784: // Index base is not clearly specified by ATA8-ACS (T13/1699-D Revision 6a),
1785: // it is 1-based in practice.
1786: erridx--;
1787:
1788: // Calculate #errors to print
1789: unsigned errcnt = log->device_error_count;
1790:
1791: if (errcnt <= nentries)
1792: pout("Device Error Count: %u\n", log->device_error_count);
1793: else {
1794: errcnt = nentries;
1795: pout("Device Error Count: %u (device log contains only the most recent %u errors)\n",
1796: log->device_error_count, errcnt);
1797: }
1798:
1799: if (max_errors < errcnt)
1800: errcnt = max_errors;
1801:
1802: print_off();
1803: pout("\tCR = Command Register\n"
1804: "\tFEATR = Features Register\n"
1805: "\tCOUNT = Count (was: Sector Count) Register\n"
1806: "\tLBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8\n"
1807: "\tLH = LBA High (was: Cylinder High) Register ] LBA\n"
1808: "\tLM = LBA Mid (was: Cylinder Low) Register ] Register\n"
1809: "\tLL = LBA Low (was: Sector Number) Register ]\n"
1810: "\tDV = Device (was: Device/Head) Register\n"
1811: "\tDC = Device Control Register\n"
1812: "\tER = Error register\n"
1813: "\tST = Status register\n"
1814: "Powered_Up_Time is measured from power on, and printed as\n"
1815: "DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,\n"
1816: "SS=sec, and sss=millisec. It \"wraps\" after 49.710 days.\n\n");
1817:
1818: // Iterate through circular buffer in reverse direction
1819: for (unsigned i = 0, errnum = log->device_error_count;
1820: i < errcnt; i++, errnum--, erridx = (erridx > 0 ? erridx - 1 : nentries - 1)) {
1821:
1822: const ata_smart_exterrlog_error_log & entry = log[erridx / 4].error_logs[erridx % 4];
1823:
1824: // Skip unused entries
1825: if (!nonempty(&entry, sizeof(entry))) {
1826: pout("Error %u [%u] log entry is empty\n", errnum, erridx);
1827: continue;
1828: }
1829:
1830: // Print error information
1831: print_on();
1832: const ata_smart_exterrlog_error & err = entry.error;
1833: pout("Error %u [%u] occurred at disk power-on lifetime: %u hours (%u days + %u hours)\n",
1834: errnum, erridx, err.timestamp, err.timestamp / 24, err.timestamp % 24);
1835: print_off();
1836:
1837: pout(" When the command that caused the error occurred, the device was %s.\n\n",
1838: get_error_log_state_desc(err.state));
1839:
1840: // Print registers
1841: pout(" After command completion occurred, registers were:\n"
1842: " ER -- ST COUNT LBA_48 LH LM LL DV DC\n"
1843: " -- -- -- == -- == == == -- -- -- -- --\n"
1844: " %02x -- %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
1845: err.error_register,
1846: err.status_register,
1847: err.count_register_hi,
1848: err.count_register,
1849: err.lba_high_register_hi,
1850: err.lba_mid_register_hi,
1851: err.lba_low_register_hi,
1852: err.lba_high_register,
1853: err.lba_mid_register,
1854: err.lba_low_register,
1855: err.device_register,
1856: err.device_control_register);
1857:
1858: // Add a description of the contents of the status and error registers
1859: // if possible
1.1.1.3 misho 1860: std::string st_er_desc = format_st_er_desc(&entry);
1861: if (!st_er_desc.empty())
1862: pout(" %s", st_er_desc.c_str());
1.1 misho 1863: pout("\n\n");
1864:
1865: // Print command history
1866: pout(" Commands leading to the command that caused the error were:\n"
1867: " CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name\n"
1868: " -- == -- == -- == == == -- -- -- -- -- --------------- --------------------\n");
1869: for (int ci = 4; ci >= 0; ci--) {
1870: const ata_smart_exterrlog_command & cmd = entry.commands[ci];
1871:
1872: // Skip unused entries
1873: if (!nonempty(&cmd, sizeof(cmd)))
1874: continue;
1875:
1876: // Print registers, timestamp and ATA command name
1877: pout(" %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n",
1878: cmd.command_register,
1879: cmd.features_register_hi,
1880: cmd.features_register,
1881: cmd.count_register_hi,
1882: cmd.count_register,
1883: cmd.lba_high_register_hi,
1884: cmd.lba_mid_register_hi,
1885: cmd.lba_low_register_hi,
1886: cmd.lba_high_register,
1887: cmd.lba_mid_register,
1888: cmd.lba_low_register,
1889: cmd.device_register,
1890: cmd.device_control_register,
1.1.1.3 misho 1891: format_milliseconds(cmd.timestamp).c_str(),
1.1 misho 1892: look_up_ata_command(cmd.command_register, cmd.features_register));
1893: }
1894: pout("\n");
1895: }
1896:
1897: print_on();
1898: if (printing_is_switchable)
1899: pout("\n");
1900: print_off();
1901: return log->device_error_count;
1902: }
1903:
1904: // Print SMART Extended Self-test Log (GP Log 0x07)
1905: static int PrintSmartExtSelfTestLog(const ata_smart_extselftestlog * log,
1906: unsigned nsectors, unsigned max_entries)
1907: {
1908: pout("SMART Extended Self-test Log Version: %u (%u sectors)\n",
1909: log->version, nsectors);
1910:
1911: if (!log->log_desc_index){
1912: pout("No self-tests have been logged. [To run self-tests, use: smartctl -t]\n\n");
1913: return 0;
1914: }
1915:
1916: // Check index
1917: unsigned nentries = nsectors * 19;
1918: unsigned logidx = log->log_desc_index;
1919: if (logidx > nentries) {
1920: pout("Invalid Self-test Log index = 0x%04x (reserved = 0x%02x)\n", logidx, log->reserved1);
1921: return 0;
1922: }
1923:
1924: // Index base is not clearly specified by ATA8-ACS (T13/1699-D Revision 6a),
1925: // it is 1-based in practice.
1926: logidx--;
1927:
1928: bool print_header = true;
1929: int errcnt = 0, igncnt = 0;
1930: int ext_ok_testnum = -1;
1931:
1932: // Iterate through circular buffer in reverse direction
1933: for (unsigned i = 0, testnum = 1;
1934: i < nentries && testnum <= max_entries;
1935: i++, logidx = (logidx > 0 ? logidx - 1 : nentries - 1)) {
1936:
1937: const ata_smart_extselftestlog_desc & entry = log[logidx / 19].log_descs[logidx % 19];
1938:
1939: // Skip unused entries
1940: if (!nonempty(&entry, sizeof(entry)))
1941: continue;
1942:
1943: // Get LBA
1944: const unsigned char * b = entry.failing_lba;
1945: uint64_t lba48 = b[0]
1946: | ( b[1] << 8)
1947: | ( b[2] << 16)
1948: | ((uint64_t)b[3] << 24)
1949: | ((uint64_t)b[4] << 32)
1950: | ((uint64_t)b[5] << 40);
1951:
1952: // Print entry
1953: int state = ataPrintSmartSelfTestEntry(testnum, entry.self_test_type,
1954: entry.self_test_status, entry.timestamp, lba48,
1955: false /*!print_error_only*/, print_header);
1956:
1957: if (state < 0) {
1958: // Self-test showed an error
1959: if (ext_ok_testnum < 0)
1960: errcnt++;
1961: else
1962: // Newer successful extended self-test exits
1963: igncnt++;
1964: }
1965: else if (state > 0 && ext_ok_testnum < 0) {
1966: // Latest successful extended self-test
1967: ext_ok_testnum = testnum;
1968: }
1969: testnum++;
1970: }
1971:
1972: if (igncnt)
1973: pout("%d of %d failed self-tests are outdated by newer successful extended offline self-test #%2d\n",
1974: igncnt, igncnt+errcnt, ext_ok_testnum);
1975:
1976: pout("\n");
1977: return errcnt;
1978: }
1979:
1980: static void ataPrintSelectiveSelfTestLog(const ata_selective_self_test_log * log, const ata_smart_values * sv)
1981: {
1982: int i,field1,field2;
1983: const char *msg;
1984: char tmp[64];
1985: uint64_t maxl=0,maxr=0;
1986: uint64_t current=log->currentlba;
1987: uint64_t currentend=current+65535;
1988:
1989: // print data structure revision number
1990: pout("SMART Selective self-test log data structure revision number %d\n",(int)log->logversion);
1991: if (1 != log->logversion)
1992: pout("Note: revision number not 1 implies that no selective self-test has ever been run\n");
1993:
1994: switch((sv->self_test_exec_status)>>4){
1995: case 0:msg="Completed";
1996: break;
1997: case 1:msg="Aborted_by_host";
1998: break;
1999: case 2:msg="Interrupted";
2000: break;
2001: case 3:msg="Fatal_error";
2002: break;
2003: case 4:msg="Completed_unknown_failure";
2004: break;
2005: case 5:msg="Completed_electrical_failure";
2006: break;
2007: case 6:msg="Completed_servo/seek_failure";
2008: break;
2009: case 7:msg="Completed_read_failure";
2010: break;
2011: case 8:msg="Completed_handling_damage??";
2012: break;
2013: case 15:msg="Self_test_in_progress";
2014: break;
2015: default:msg="Unknown_status ";
2016: break;
2017: }
2018:
2019: // find the number of columns needed for printing. If in use, the
2020: // start/end of span being read-scanned...
2021: if (log->currentspan>5) {
2022: maxl=current;
2023: maxr=currentend;
2024: }
2025: for (i=0; i<5; i++) {
2026: uint64_t start=log->span[i].start;
2027: uint64_t end =log->span[i].end;
2028: // ... plus max start/end of each of the five test spans.
2029: if (start>maxl)
2030: maxl=start;
2031: if (end > maxr)
2032: maxr=end;
2033: }
2034:
2035: // we need at least 7 characters wide fields to accomodate the
2036: // labels
2037: if ((field1=snprintf(tmp,64, "%"PRIu64, maxl))<7)
2038: field1=7;
2039: if ((field2=snprintf(tmp,64, "%"PRIu64, maxr))<7)
2040: field2=7;
2041:
2042: // now print the five test spans
2043: pout(" SPAN %*s %*s CURRENT_TEST_STATUS\n", field1, "MIN_LBA", field2, "MAX_LBA");
2044:
2045: for (i=0; i<5; i++) {
2046: uint64_t start=log->span[i].start;
2047: uint64_t end=log->span[i].end;
2048:
2049: if ((i+1)==(int)log->currentspan)
2050: // this span is currently under test
2051: pout(" %d %*"PRIu64" %*"PRIu64" %s [%01d0%% left] (%"PRIu64"-%"PRIu64")\n",
2052: i+1, field1, start, field2, end, msg,
2053: (int)(sv->self_test_exec_status & 0xf), current, currentend);
2054: else
2055: // this span is not currently under test
2056: pout(" %d %*"PRIu64" %*"PRIu64" Not_testing\n",
2057: i+1, field1, start, field2, end);
2058: }
2059:
2060: // if we are currently read-scanning, print LBAs and the status of
2061: // the read scan
2062: if (log->currentspan>5)
2063: pout("%5d %*"PRIu64" %*"PRIu64" Read_scanning %s\n",
2064: (int)log->currentspan, field1, current, field2, currentend,
2065: OfflineDataCollectionStatus(sv->offline_data_collection_status));
2066:
2067: /* Print selective self-test flags. Possible flag combinations are
2068: (numbering bits from 0-15):
2069: Bit-1 Bit-3 Bit-4
2070: Scan Pending Active
2071: 0 * * Don't scan
2072: 1 0 0 Will carry out scan after selective test
2073: 1 1 0 Waiting to carry out scan after powerup
2074: 1 0 1 Currently scanning
2075: 1 1 1 Currently scanning
2076: */
2077:
2078: pout("Selective self-test flags (0x%x):\n", (unsigned int)log->flags);
2079: if (log->flags & SELECTIVE_FLAG_DOSCAN) {
2080: if (log->flags & SELECTIVE_FLAG_ACTIVE)
2081: pout(" Currently read-scanning the remainder of the disk.\n");
2082: else if (log->flags & SELECTIVE_FLAG_PENDING)
2083: pout(" Read-scan of remainder of disk interrupted; will resume %d min after power-up.\n",
2084: (int)log->pendingtime);
2085: else
2086: pout(" After scanning selected spans, read-scan remainder of disk.\n");
2087: }
2088: else
2089: pout(" After scanning selected spans, do NOT read-scan remainder of disk.\n");
2090:
2091: // print pending time
2092: pout("If Selective self-test is pending on power-up, resume after %d minute delay.\n",
2093: (int)log->pendingtime);
2094:
2095: return;
2096: }
2097:
2098: // Format SCT Temperature value
1.1.1.3 misho 2099: static const char * sct_ptemp(signed char x, char (& buf)[20])
1.1 misho 2100: {
2101: if (x == -128 /*0x80 = unknown*/)
1.1.1.3 misho 2102: return " ?";
2103: snprintf(buf, sizeof(buf), "%2d", x);
1.1 misho 2104: return buf;
2105: }
2106:
1.1.1.3 misho 2107: static const char * sct_pbar(int x, char (& buf)[64])
1.1 misho 2108: {
2109: if (x <= 19)
2110: x = 0;
2111: else
2112: x -= 19;
2113: bool ov = false;
2114: if (x > 40) {
2115: x = 40; ov = true;
2116: }
2117: if (x > 0) {
2118: memset(buf, '*', x);
2119: if (ov)
2120: buf[x-1] = '+';
2121: buf[x] = 0;
2122: }
2123: else {
2124: buf[0] = '-'; buf[1] = 0;
2125: }
2126: return buf;
2127: }
2128:
2129: static const char * sct_device_state_msg(unsigned char state)
2130: {
2131: switch (state) {
2132: case 0: return "Active";
2133: case 1: return "Stand-by";
2134: case 2: return "Sleep";
2135: case 3: return "DST executing in background";
2136: case 4: return "SMART Off-line Data Collection executing in background";
2137: case 5: return "SCT command executing in background";
2138: default:return "Unknown";
2139: }
2140: }
2141:
2142: // Print SCT Status
2143: static int ataPrintSCTStatus(const ata_sct_status_response * sts)
2144: {
2145: pout("SCT Status Version: %u\n", sts->format_version);
2146: pout("SCT Version (vendor specific): %u (0x%04x)\n", sts->sct_version, sts->sct_version);
2147: pout("SCT Support Level: %u\n", sts->sct_spec);
2148: pout("Device State: %s (%u)\n",
2149: sct_device_state_msg(sts->device_state), sts->device_state);
2150: char buf1[20], buf2[20];
1.1.1.2 misho 2151: if ( !sts->min_temp && !sts->life_min_temp
2152: && !sts->under_limit_count && !sts->over_limit_count) {
1.1 misho 2153: // "Reserved" fields not set, assume "old" format version 2
1.1.1.2 misho 2154: // Table 11 of T13/1701DT-N (SMART Command Transport) Revision 5, February 2005
2155: // Table 54 of T13/1699-D (ATA8-ACS) Revision 3e, July 2006
1.1 misho 2156: pout("Current Temperature: %s Celsius\n",
2157: sct_ptemp(sts->hda_temp, buf1));
2158: pout("Power Cycle Max Temperature: %s Celsius\n",
2159: sct_ptemp(sts->max_temp, buf2));
2160: pout("Lifetime Max Temperature: %s Celsius\n",
2161: sct_ptemp(sts->life_max_temp, buf2));
2162: }
2163: else {
2164: // Assume "new" format version 2 or version 3
1.1.1.2 misho 2165: // T13/e06152r0-3 (Additional SCT Temperature Statistics), August - October 2006
2166: // Table 60 of T13/1699-D (ATA8-ACS) Revision 3f, December 2006 (format version 2)
2167: // Table 80 of T13/1699-D (ATA8-ACS) Revision 6a, September 2008 (format version 3)
1.1 misho 2168: pout("Current Temperature: %s Celsius\n",
2169: sct_ptemp(sts->hda_temp, buf1));
2170: pout("Power Cycle Min/Max Temperature: %s/%s Celsius\n",
2171: sct_ptemp(sts->min_temp, buf1), sct_ptemp(sts->max_temp, buf2));
2172: pout("Lifetime Min/Max Temperature: %s/%s Celsius\n",
2173: sct_ptemp(sts->life_min_temp, buf1), sct_ptemp(sts->life_max_temp, buf2));
1.1.1.2 misho 2174: signed char avg = sts->byte205; // Average Temperature from e06152r0-2, removed in e06152r3
2175: if (0 < avg && sts->life_min_temp <= avg && avg <= sts->life_max_temp)
2176: pout("Lifetime Average Temperature: %2d Celsius\n", avg);
1.1 misho 2177: pout("Under/Over Temperature Limit Count: %2u/%u\n",
2178: sts->under_limit_count, sts->over_limit_count);
2179: }
2180: return 0;
2181: }
2182:
2183: // Print SCT Temperature History Table
2184: static int ataPrintSCTTempHist(const ata_sct_temperature_history_table * tmh)
2185: {
1.1.1.3 misho 2186: char buf1[20], buf2[20], buf3[64];
2187: pout("SCT Temperature History Version: %u%s\n", tmh->format_version,
2188: (tmh->format_version != 2 ? " (Unknown, should be 2)" : ""));
1.1 misho 2189: pout("Temperature Sampling Period: %u minute%s\n",
2190: tmh->sampling_period, (tmh->sampling_period==1?"":"s"));
2191: pout("Temperature Logging Interval: %u minute%s\n",
2192: tmh->interval, (tmh->interval==1?"":"s"));
2193: pout("Min/Max recommended Temperature: %s/%s Celsius\n",
2194: sct_ptemp(tmh->min_op_limit, buf1), sct_ptemp(tmh->max_op_limit, buf2));
2195: pout("Min/Max Temperature Limit: %s/%s Celsius\n",
2196: sct_ptemp(tmh->under_limit, buf1), sct_ptemp(tmh->over_limit, buf2));
2197: pout("Temperature History Size (Index): %u (%u)\n", tmh->cb_size, tmh->cb_index);
1.1.1.3 misho 2198:
1.1 misho 2199: if (!(0 < tmh->cb_size && tmh->cb_size <= sizeof(tmh->cb) && tmh->cb_index < tmh->cb_size)) {
1.1.1.3 misho 2200: if (!tmh->cb_size)
2201: pout("Temperature History is empty\n");
2202: else
2203: pout("Invalid Temperature History Size or Index\n");
1.1 misho 2204: return 0;
2205: }
2206:
2207: // Print table
2208: pout("\nIndex Estimated Time Temperature Celsius\n");
2209: unsigned n = 0, i = (tmh->cb_index+1) % tmh->cb_size;
2210: unsigned interval = (tmh->interval > 0 ? tmh->interval : 1);
2211: time_t t = time(0) - (tmh->cb_size-1) * interval * 60;
2212: t -= t % (interval * 60);
2213: while (n < tmh->cb_size) {
2214: // Find range of identical temperatures
2215: unsigned n1 = n, n2 = n+1, i2 = (i+1) % tmh->cb_size;
2216: while (n2 < tmh->cb_size && tmh->cb[i2] == tmh->cb[i]) {
2217: n2++; i2 = (i2+1) % tmh->cb_size;
2218: }
2219: // Print range
2220: while (n < n2) {
2221: if (n == n1 || n == n2-1 || n2 <= n1+3) {
2222: char date[30];
2223: // TODO: Don't print times < boot time
2224: strftime(date, sizeof(date), "%Y-%m-%d %H:%M", localtime(&t));
2225: pout(" %3u %s %s %s\n", i, date,
1.1.1.3 misho 2226: sct_ptemp(tmh->cb[i], buf1), sct_pbar(tmh->cb[i], buf3));
1.1 misho 2227: }
2228: else if (n == n1+1) {
2229: pout(" ... ..(%3u skipped). .. %s\n",
1.1.1.3 misho 2230: n2-n1-2, sct_pbar(tmh->cb[i], buf3));
1.1 misho 2231: }
2232: t += interval * 60; i = (i+1) % tmh->cb_size; n++;
2233: }
2234: }
2235: //assert(n == tmh->cb_size && i == (tmh->cb_index+1) % tmh->cb_size);
2236:
2237: return 0;
2238: }
2239:
2240: // Print SCT Error Recovery Control timers
2241: static void ataPrintSCTErrorRecoveryControl(bool set, unsigned short read_timer, unsigned short write_timer)
2242: {
2243: pout("SCT Error Recovery Control%s:\n", (set ? " set to" : ""));
2244: if (!read_timer)
2245: pout(" Read: Disabled\n");
2246: else
2247: pout(" Read: %6d (%0.1f seconds)\n", read_timer, read_timer/10.0);
2248: if (!write_timer)
2249: pout(" Write: Disabled\n");
2250: else
2251: pout(" Write: %6d (%0.1f seconds)\n", write_timer, write_timer/10.0);
2252: }
2253:
1.1.1.2 misho 2254: static void print_aam_level(const char * msg, int level, int recommended = -1)
2255: {
2256: // Table 56 of T13/1699-D (ATA8-ACS) Revision 6a, September 6, 2008
2257: // Obsolete since T13/2015-D (ACS-2) Revision 4a, December 9, 2010
2258: const char * s;
2259: if (level == 0)
2260: s = "vendor specific";
2261: else if (level < 128)
2262: s = "unknown/retired";
2263: else if (level == 128)
2264: s = "quiet";
2265: else if (level < 254)
2266: s = "intermediate";
2267: else if (level == 254)
2268: s = "maximum performance";
2269: else
2270: s = "reserved";
2271:
2272: if (recommended >= 0)
2273: pout("%s%d (%s), recommended: %d\n", msg, level, s, recommended);
2274: else
2275: pout("%s%d (%s)\n", msg, level, s);
2276: }
2277:
2278: static void print_apm_level(const char * msg, int level)
2279: {
2280: // Table 120 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
2281: const char * s;
2282: if (!(1 <= level && level <= 254))
2283: s = "reserved";
2284: else if (level == 1)
2285: s = "minimum power consumption with standby";
2286: else if (level < 128)
2287: s = "intermediate level with standby";
2288: else if (level == 128)
2289: s = "minimum power consumption without standby";
2290: else if (level < 254)
2291: s = "intermediate level without standby";
2292: else
2293: s = "maximum performance";
2294:
2295: pout("%s%d (%s)\n", msg, level, s);
2296: }
2297:
2298: static void print_ata_security_status(const char * msg, unsigned short state)
2299: {
2300: const char * s1, * s2 = "", * s3 = "", * s4 = "";
2301:
2302: // Table 6 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
2303: if (!(state & 0x0001))
2304: s1 = "Unavailable";
2305: else if (!(state & 0x0002)) {
2306: s1 = "Disabled, ";
2307: if (!(state & 0x0008))
2308: s2 = "NOT FROZEN [SEC1]";
2309: else
2310: s2 = "frozen [SEC2]";
2311: }
2312: else {
2313: s1 = "ENABLED, PW level ";
2314: if (!(state & 0x0020))
2315: s2 = "HIGH";
2316: else
2317: s2 = "MAX";
2318:
2319: if (!(state & 0x0004)) {
2320: s3 = ", not locked, ";
2321: if (!(state & 0x0008))
2322: s4 = "not frozen [SEC5]";
2323: else
2324: s4 = "frozen [SEC6]";
2325: }
2326: else {
2327: s3 = ", **LOCKED** [SEC4]";
2328: if (state & 0x0010)
2329: s4 = ", PW ATTEMPTS EXCEEDED";
2330: }
2331: }
2332:
2333: pout("%s%s%s%s%s\n", msg, s1, s2, s3, s4);
2334: }
2335:
2336: static void print_standby_timer(const char * msg, int timer, const ata_identify_device & drive)
2337: {
2338: const char * s1 = 0;
2339: int hours = 0, minutes = 0 , seconds = 0;
2340:
2341: // Table 63 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
2342: if (timer == 0)
2343: s1 = "disabled";
2344: else if (timer <= 240)
2345: seconds = timer * 5, minutes = seconds / 60, seconds %= 60;
2346: else if (timer <= 251)
2347: minutes = (timer - 240) * 30, hours = minutes / 60, minutes %= 60;
2348: else if (timer == 252)
2349: minutes = 21;
2350: else if (timer == 253)
2351: s1 = "between 8 hours and 12 hours";
2352: else if (timer == 255)
2353: minutes = 21, seconds = 15;
2354: else
2355: s1 = "reserved";
2356:
2357: const char * s2 = "", * s3 = "";
2358: if (!(drive.words047_079[49-47] & 0x2000))
2359: s2 = " or vendor-specific";
2360: if (timer > 0 && (drive.words047_079[50-47] & 0xc001) == 0x4001)
2361: s3 = ", a vendor-specific minimum applies";
2362:
2363: if (s1)
2364: pout("%s%d (%s%s%s)\n", msg, timer, s1, s2, s3);
2365: else
2366: pout("%s%d (%02d:%02d:%02d%s%s)\n", msg, timer, hours, minutes, seconds, s2, s3);
2367: }
2368:
1.1 misho 2369:
2370: int ataPrintMain (ata_device * device, const ata_print_options & options)
2371: {
2372: // If requested, check power mode first
2373: const char * powername = 0;
2374: bool powerchg = false;
2375: if (options.powermode) {
2376: unsigned char powerlimit = 0xff;
2377: int powermode = ataCheckPowerMode(device);
2378: switch (powermode) {
2379: case -1:
1.1.1.2 misho 2380: if (device->is_syscall_unsup()) {
1.1 misho 2381: pout("CHECK POWER MODE not implemented, ignoring -n option\n"); break;
2382: }
2383: powername = "SLEEP"; powerlimit = 2;
2384: break;
2385: case 0:
2386: powername = "STANDBY"; powerlimit = 3; break;
2387: case 0x80:
2388: powername = "IDLE"; powerlimit = 4; break;
2389: case 0xff:
2390: powername = "ACTIVE or IDLE"; break;
2391: default:
2392: pout("CHECK POWER MODE returned unknown value 0x%02x, ignoring -n option\n", powermode);
2393: break;
2394: }
2395: if (powername) {
2396: if (options.powermode >= powerlimit) {
2397: pout("Device is in %s mode, exit(%d)\n", powername, FAILPOWER);
2398: return FAILPOWER;
2399: }
2400: powerchg = (powermode != 0xff); // SMART tests will spin up drives
2401: }
2402: }
2403:
2404: // SMART values needed ?
2405: bool need_smart_val = (
2406: options.smart_check_status
2407: || options.smart_general_values
2408: || options.smart_vendor_attrib
2409: || options.smart_error_log
2410: || options.smart_selftest_log
2411: || options.smart_selective_selftest_log
2412: || options.smart_ext_error_log
2413: || options.smart_ext_selftest_log
2414: || options.smart_auto_offl_enable
2415: || options.smart_auto_offl_disable
2416: || options.smart_selftest_type != -1
2417: );
2418:
2419: // SMART must be enabled ?
2420: bool need_smart_enabled = (
2421: need_smart_val
2422: || options.smart_auto_save_enable
2423: || options.smart_auto_save_disable
2424: );
2425:
2426: // SMART feature set needed ?
2427: bool need_smart_support = (
2428: need_smart_enabled
2429: || options.smart_enable
2430: || options.smart_disable
2431: );
2432:
2433: // SMART and GP log directories needed ?
2434: bool need_smart_logdir = options.smart_logdir;
2435:
2436: bool need_gp_logdir = (
2437: options.gp_logdir
2438: || options.smart_ext_error_log
2439: || options.smart_ext_selftest_log
2440: || options.devstat_all_pages
2441: || options.devstat_ssd_page
2442: || !options.devstat_pages.empty()
2443: );
2444:
2445: unsigned i;
2446: for (i = 0; i < options.log_requests.size(); i++) {
2447: if (options.log_requests[i].gpl)
2448: need_gp_logdir = true;
2449: else
2450: need_smart_logdir = true;
2451: }
2452:
2453: // SCT commands needed ?
2454: bool need_sct_support = (
2455: options.sct_temp_sts
2456: || options.sct_temp_hist
2457: || options.sct_temp_int
2458: || options.sct_erc_get
2459: || options.sct_erc_set
1.1.1.4 ! misho 2460: || options.sct_wcache_reorder_get
! 2461: || options.sct_wcache_reorder_set
1.1 misho 2462: );
2463:
2464: // Exit if no further options specified
1.1.1.3 misho 2465: if (!( options.drive_info || options.show_presets
2466: || need_smart_support || need_smart_logdir
2467: || need_gp_logdir || need_sct_support
2468: || options.sataphy
2469: || options.identify_word_level >= 0
2470: || options.get_set_used )) {
1.1 misho 2471: if (powername)
2472: pout("Device is in %s mode\n", powername);
2473: else
2474: pout("ATA device successfully opened\n\n"
2475: "Use 'smartctl -a' (or '-x') to print SMART (and more) information\n\n");
2476: return 0;
2477: }
2478:
2479: // Start by getting Drive ID information. We need this, to know if SMART is supported.
2480: int returnval = 0;
2481: ata_identify_device drive; memset(&drive, 0, sizeof(drive));
1.1.1.3 misho 2482: unsigned char raw_drive[sizeof(drive)]; memset(&raw_drive, 0, sizeof(raw_drive));
2483:
1.1 misho 2484: device->clear_err();
1.1.1.3 misho 2485: int retid = ata_read_identity(device, &drive, options.fix_swapped_id, raw_drive);
1.1 misho 2486: if (retid < 0) {
1.1.1.3 misho 2487: pout("Read Device Identity failed: %s\n\n",
1.1 misho 2488: (device->get_errno() ? device->get_errmsg() : "Unknown error"));
2489: failuretest(MANDATORY_CMD, returnval|=FAILID);
2490: }
2491: else if (!nonempty(&drive, sizeof(drive))) {
1.1.1.3 misho 2492: pout("Read Device Identity failed: empty IDENTIFY data\n\n");
1.1 misho 2493: failuretest(MANDATORY_CMD, returnval|=FAILID);
2494: }
2495:
2496: // If requested, show which presets would be used for this drive and exit.
2497: if (options.show_presets) {
2498: show_presets(&drive);
2499: return 0;
2500: }
2501:
2502: // Use preset vendor attribute options unless user has requested otherwise.
2503: ata_vendor_attr_defs attribute_defs = options.attribute_defs;
1.1.1.3 misho 2504: firmwarebug_defs firmwarebugs = options.firmwarebugs;
1.1 misho 2505: const drive_settings * dbentry = 0;
2506: if (!options.ignore_presets)
2507: dbentry = lookup_drive_apply_presets(&drive, attribute_defs,
1.1.1.3 misho 2508: firmwarebugs);
1.1 misho 2509:
1.1.1.3 misho 2510: // Get capacity, sector sizes and rotation rate
1.1 misho 2511: ata_size_info sizes;
2512: ata_get_size_info(&drive, sizes);
1.1.1.3 misho 2513: int rpm = ata_get_rotation_rate(&drive);
2514:
2515: // Print ATA IDENTIFY info if requested
2516: if (options.identify_word_level >= 0) {
2517: pout("=== ATA IDENTIFY DATA ===\n");
2518: // Pass raw data without endianness adjustments
2519: ata_print_identify_data(raw_drive, (options.identify_word_level > 0), options.identify_bit_level);
2520: }
1.1 misho 2521:
2522: // Print most drive identity information if requested
2523: if (options.drive_info) {
2524: pout("=== START OF INFORMATION SECTION ===\n");
1.1.1.3 misho 2525: print_drive_info(&drive, sizes, rpm, dbentry);
1.1 misho 2526: }
2527:
2528: // Check and print SMART support and state
2529: int smart_supported = -1, smart_enabled = -1;
2530: if (need_smart_support || options.drive_info) {
2531:
2532: // Packet device ?
2533: if (retid > 0) {
2534: pout("SMART support is: Unavailable - Packet Interface Devices [this device: %s] don't support ATA SMART\n",
2535: packetdevicetype(retid-1));
2536: }
2537: else {
2538: // Disk device: SMART supported and enabled ?
2539: smart_supported = ataSmartSupport(&drive);
2540: smart_enabled = ataIsSmartEnabled(&drive);
2541:
2542: if (smart_supported < 0)
2543: pout("SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.\n");
2544: if (smart_supported && smart_enabled < 0) {
2545: pout("SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.\n");
2546: if (need_smart_support) {
2547: failuretest(MANDATORY_CMD, returnval|=FAILSMART);
2548: // check SMART support by trying a command
2549: pout(" Checking to be sure by trying SMART RETURN STATUS command.\n");
2550: if (ataDoesSmartWork(device))
2551: smart_supported = smart_enabled = 1;
2552: }
2553: }
2554: else if (smart_supported < 0 && (smart_enabled > 0 || dbentry))
2555: // Assume supported if enabled or in drive database
2556: smart_supported = 1;
2557:
2558: if (smart_supported < 0)
2559: pout("SMART support is: Unknown - Try option -s with argument 'on' to enable it.");
2560: else if (!smart_supported)
2561: pout("SMART support is: Unavailable - device lacks SMART capability.\n");
2562: else {
2563: if (options.drive_info)
2564: pout("SMART support is: Available - device has SMART capability.\n");
2565: if (smart_enabled >= 0) {
2566: if (device->ata_identify_is_cached()) {
2567: if (options.drive_info)
2568: pout(" %sabled status cached by OS, trying SMART RETURN STATUS cmd.\n",
2569: (smart_enabled?"En":"Dis"));
2570: smart_enabled = ataDoesSmartWork(device);
2571: }
2572: if (options.drive_info)
2573: pout("SMART support is: %s\n",
2574: (smart_enabled ? "Enabled" : "Disabled"));
2575: }
2576: }
2577: }
2578: }
2579:
1.1.1.2 misho 2580: // Print AAM status
2581: if (options.get_aam) {
2582: if ((drive.command_set_2 & 0xc200) != 0x4200) // word083
2583: pout("AAM feature is: Unavailable\n");
2584: else if (!(drive.word086 & 0x0200))
2585: pout("AAM feature is: Disabled\n");
2586: else
2587: print_aam_level("AAM level is: ", drive.words088_255[94-88] & 0xff,
2588: drive.words088_255[94-88] >> 8);
2589: }
2590:
2591: // Print APM status
2592: if (options.get_apm) {
2593: if ((drive.command_set_2 & 0xc008) != 0x4008) // word083
2594: pout("APM feature is: Unavailable\n");
2595: else if (!(drive.word086 & 0x0008))
2596: pout("APM feature is: Disabled\n");
2597: else
2598: print_apm_level("APM level is: ", drive.words088_255[91-88] & 0xff);
2599: }
2600:
2601: // Print read look-ahead status
2602: if (options.get_lookahead) {
2603: pout("Rd look-ahead is: %s\n",
2604: ( (drive.command_set_2 & 0xc000) != 0x4000 // word083
2605: || !(drive.command_set_1 & 0x0040)) ? "Unavailable" : // word082
2606: !(drive.cfs_enable_1 & 0x0040) ? "Disabled" : "Enabled"); // word085
2607: }
2608:
2609: // Print write cache status
2610: if (options.get_wcache) {
2611: pout("Write cache is: %s\n",
2612: ( (drive.command_set_2 & 0xc000) != 0x4000 // word083
2613: || !(drive.command_set_1 & 0x0020)) ? "Unavailable" : // word082
2614: !(drive.cfs_enable_1 & 0x0020) ? "Disabled" : "Enabled"); // word085
2615: }
2616:
2617: // Print ATA security status
2618: if (options.get_security)
2619: print_ata_security_status("ATA Security is: ", drive.words088_255[128-88]);
2620:
1.1.1.4 ! misho 2621: // Check if SCT commands available
! 2622: bool sct_ok = false;
! 2623: if (need_sct_support) {
! 2624: if (!isSCTCapable(&drive)) {
! 2625: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
! 2626: }
! 2627: else
! 2628: sct_ok = true;
! 2629: }
! 2630:
! 2631: // Print write cache reordering status
! 2632: if (sct_ok && options.sct_wcache_reorder_get) {
! 2633: int wcache_reorder=ataGetSetSCTWriteCacheReordering(device,
! 2634: false /* enable */, false /* persistent */, false /*set*/);
! 2635: pout("Wt Cache Reorder: ");
! 2636: switch(wcache_reorder) {
! 2637: case 0: /* not defined in standard but returned on some drives if not set */
! 2638: pout("Unknown"); break;
! 2639: case 1:
! 2640: pout("Enabled"); break;
! 2641: case 2:
! 2642: pout("Disabled"); break;
! 2643: default: /* error? */
! 2644: pout("N/A"); break;
! 2645: }
! 2646: pout("\n");
! 2647: }
! 2648: if (!sct_ok && options.sct_wcache_reorder_get) {
! 2649: pout("Wt Cache Reorder: Unavailable\n");
! 2650: }
! 2651:
1.1 misho 2652: // Print remaining drive info
2653: if (options.drive_info) {
2654: // Print the (now possibly changed) power mode if available
2655: if (powername)
2656: pout("Power mode %s %s\n", (powerchg?"was:":"is: "), powername);
2657: pout("\n");
2658: }
2659:
2660: // Exit if SMART is not supported but must be available to proceed
2661: if (smart_supported <= 0 && need_smart_support)
2662: failuretest(MANDATORY_CMD, returnval|=FAILSMART);
2663:
2664: // START OF THE ENABLE/DISABLE SECTION OF THE CODE
2665: if ( options.smart_disable || options.smart_enable
2666: || options.smart_auto_save_disable || options.smart_auto_save_enable
1.1.1.4 ! misho 2667: || options.smart_auto_offl_disable || options.smart_auto_offl_enable
! 2668: || options.set_aam || options.set_apm || options.set_lookahead
! 2669: || options.set_wcache || options.set_security_freeze || options.set_standby
! 2670: || options.sct_wcache_reorder_set)
1.1 misho 2671: pout("=== START OF ENABLE/DISABLE COMMANDS SECTION ===\n");
2672:
1.1.1.2 misho 2673: // Enable/Disable AAM
2674: if (options.set_aam) {
2675: if (options.set_aam > 0) {
2676: if (!ata_set_features(device, ATA_ENABLE_AAM, options.set_aam-1)) {
2677: pout("AAM enable failed: %s\n", device->get_errmsg());
2678: returnval |= FAILSMART;
2679: }
2680: else
2681: print_aam_level("AAM set to level ", options.set_aam-1);
2682: }
2683: else {
2684: if (!ata_set_features(device, ATA_DISABLE_AAM)) {
2685: pout("AAM disable failed: %s\n", device->get_errmsg());
2686: returnval |= FAILSMART;
2687: }
2688: else
2689: pout("AAM disabled\n");
2690: }
2691: }
2692:
2693: // Enable/Disable APM
2694: if (options.set_apm) {
2695: if (options.set_apm > 0) {
2696: if (!ata_set_features(device, ATA_ENABLE_APM, options.set_apm-1)) {
2697: pout("APM enable failed: %s\n", device->get_errmsg());
2698: returnval |= FAILSMART;
2699: }
2700: else
2701: print_apm_level("APM set to level ", options.set_apm-1);
2702: }
2703: else {
2704: if (!ata_set_features(device, ATA_DISABLE_APM)) {
2705: pout("APM disable failed: %s\n", device->get_errmsg());
2706: returnval |= FAILSMART;
2707: }
2708: else
2709: pout("APM disabled\n");
2710: }
2711: }
2712:
2713: // Enable/Disable read look-ahead
2714: if (options.set_lookahead) {
2715: bool enable = (options.set_lookahead > 0);
2716: if (!ata_set_features(device, (enable ? ATA_ENABLE_READ_LOOK_AHEAD : ATA_DISABLE_READ_LOOK_AHEAD))) {
2717: pout("Read look-ahead %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg());
2718: returnval |= FAILSMART;
2719: }
2720: else
2721: pout("Read look-ahead %sabled\n", (enable ? "en" : "dis"));
2722: }
2723:
2724: // Enable/Disable write cache
2725: if (options.set_wcache) {
2726: bool enable = (options.set_wcache > 0);
2727: if (!ata_set_features(device, (enable ? ATA_ENABLE_WRITE_CACHE : ATA_DISABLE_WRITE_CACHE))) {
2728: pout("Write cache %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg());
2729: returnval |= FAILSMART;
2730: }
2731: else
2732: pout("Write cache %sabled\n", (enable ? "en" : "dis"));
2733: }
2734:
1.1.1.4 ! misho 2735: // Enable/Disable write cache reordering
! 2736: if (sct_ok && options.sct_wcache_reorder_set) {
! 2737: bool enable = (options.sct_wcache_reorder_set > 0);
! 2738:
! 2739: int wcache_reorder=ataGetSetSCTWriteCacheReordering(device,
! 2740: enable, false /* persistent */, true /*set*/);
! 2741:
! 2742: if (wcache_reorder < 0) {
! 2743: pout("Write cache reordering %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg());
! 2744: returnval |= FAILSMART;
! 2745: }
! 2746: else
! 2747: pout("Write cache reordering %sabled\n", (enable ? "en" : "dis"));
! 2748: }
! 2749:
1.1.1.2 misho 2750: // Freeze ATA security
2751: if (options.set_security_freeze) {
2752: if (!ata_nodata_command(device, ATA_SECURITY_FREEZE_LOCK)) {
2753: pout("ATA SECURITY FREEZE LOCK failed: %s\n", device->get_errmsg());
2754: returnval |= FAILSMART;
2755: }
2756: else
2757: pout("ATA Security set to frozen mode\n");
2758: }
2759:
2760: // Set standby timer
2761: if (options.set_standby) {
2762: if (!ata_nodata_command(device, ATA_IDLE, options.set_standby-1)) {
2763: pout("ATA IDLE command failed: %s\n", device->get_errmsg());
2764: returnval |= FAILSMART;
2765: }
2766: else
2767: print_standby_timer("Standby timer set to ", options.set_standby-1, drive);
2768: }
2769:
1.1 misho 2770: // Enable/Disable SMART commands
2771: if (options.smart_enable) {
2772: if (ataEnableSmart(device)) {
1.1.1.3 misho 2773: pout("SMART Enable failed: %s\n\n", device->get_errmsg());
1.1 misho 2774: failuretest(MANDATORY_CMD, returnval|=FAILSMART);
2775: }
2776: else {
2777: pout("SMART Enabled.\n");
2778: smart_enabled = 1;
2779: }
2780: }
2781:
2782: // Turn off SMART on device
2783: if (options.smart_disable) {
2784: if (ataDisableSmart(device)) {
1.1.1.3 misho 2785: pout("SMART Disable failed: %s\n\n", device->get_errmsg());
1.1 misho 2786: failuretest(MANDATORY_CMD,returnval|=FAILSMART);
2787: }
2788: }
2789:
2790: // Exit if SMART is disabled but must be enabled to proceed
1.1.1.3 misho 2791: if (options.smart_disable || (smart_enabled <= 0 && need_smart_enabled && !is_permissive())) {
1.1 misho 2792: pout("SMART Disabled. Use option -s with argument 'on' to enable it.\n");
1.1.1.3 misho 2793: if (!options.smart_disable)
2794: pout("(override with '-T permissive' option)\n");
1.1 misho 2795: return returnval;
2796: }
2797:
2798: // Enable/Disable Auto-save attributes
2799: if (options.smart_auto_save_enable) {
2800: if (ataEnableAutoSave(device)){
1.1.1.3 misho 2801: pout("SMART Enable Attribute Autosave failed: %s\n\n", device->get_errmsg());
1.1 misho 2802: failuretest(MANDATORY_CMD, returnval|=FAILSMART);
2803: }
2804: else
2805: pout("SMART Attribute Autosave Enabled.\n");
2806: }
2807:
2808: if (options.smart_auto_save_disable) {
2809: if (ataDisableAutoSave(device)){
1.1.1.3 misho 2810: pout("SMART Disable Attribute Autosave failed: %s\n\n", device->get_errmsg());
1.1 misho 2811: failuretest(MANDATORY_CMD, returnval|=FAILSMART);
2812: }
2813: else
2814: pout("SMART Attribute Autosave Disabled.\n");
2815: }
2816:
2817: // Read SMART values and thresholds if necessary
2818: ata_smart_values smartval; memset(&smartval, 0, sizeof(smartval));
2819: ata_smart_thresholds_pvt smartthres; memset(&smartthres, 0, sizeof(smartthres));
2820: bool smart_val_ok = false, smart_thres_ok = false;
2821:
2822: if (need_smart_val) {
2823: if (ataReadSmartValues(device, &smartval)) {
1.1.1.3 misho 2824: pout("Read SMART Data failed: %s\n\n", device->get_errmsg());
1.1 misho 2825: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2826: }
2827: else {
2828: smart_val_ok = true;
2829:
2830: if (options.smart_check_status || options.smart_vendor_attrib) {
2831: if (ataReadSmartThresholds(device, &smartthres)){
1.1.1.3 misho 2832: pout("Read SMART Thresholds failed: %s\n\n", device->get_errmsg());
1.1 misho 2833: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2834: }
2835: else
2836: smart_thres_ok = true;
2837: }
2838: }
2839: }
2840:
2841: // Enable/Disable Off-line testing
2842: bool needupdate = false;
2843: if (options.smart_auto_offl_enable) {
2844: if (!isSupportAutomaticTimer(&smartval)){
1.1.1.3 misho 2845: pout("SMART Automatic Timers not supported\n\n");
1.1 misho 2846: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2847: }
2848: needupdate = smart_val_ok;
2849: if (ataEnableAutoOffline(device)){
1.1.1.3 misho 2850: pout("SMART Enable Automatic Offline failed: %s\n\n", device->get_errmsg());
1.1 misho 2851: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2852: }
2853: else
2854: pout("SMART Automatic Offline Testing Enabled every four hours.\n");
2855: }
2856:
2857: if (options.smart_auto_offl_disable) {
2858: if (!isSupportAutomaticTimer(&smartval)){
1.1.1.3 misho 2859: pout("SMART Automatic Timers not supported\n\n");
1.1 misho 2860: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2861: }
2862: needupdate = smart_val_ok;
2863: if (ataDisableAutoOffline(device)){
1.1.1.3 misho 2864: pout("SMART Disable Automatic Offline failed: %s\n\n", device->get_errmsg());
1.1 misho 2865: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2866: }
2867: else
2868: pout("SMART Automatic Offline Testing Disabled.\n");
2869: }
2870:
2871: if (needupdate && ataReadSmartValues(device, &smartval)){
1.1.1.3 misho 2872: pout("Read SMART Data failed: %s\n\n", device->get_errmsg());
1.1 misho 2873: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2874: smart_val_ok = false;
2875: }
2876:
2877: // all this for a newline!
2878: if ( options.smart_disable || options.smart_enable
2879: || options.smart_auto_save_disable || options.smart_auto_save_enable
1.1.1.4 ! misho 2880: || options.smart_auto_offl_disable || options.smart_auto_offl_enable
! 2881: || options.set_aam || options.set_apm || options.set_lookahead
! 2882: || options.set_wcache || options.set_security_freeze || options.set_standby
! 2883: || options.sct_wcache_reorder_set)
1.1 misho 2884: pout("\n");
2885:
2886: // START OF READ-ONLY OPTIONS APART FROM -V and -i
2887: if ( options.smart_check_status || options.smart_general_values
2888: || options.smart_vendor_attrib || options.smart_error_log
2889: || options.smart_selftest_log || options.smart_selective_selftest_log
2890: || options.smart_ext_error_log || options.smart_ext_selftest_log
2891: || options.sct_temp_sts || options.sct_temp_hist )
2892: pout("=== START OF READ SMART DATA SECTION ===\n");
2893:
2894: // Check SMART status
2895: if (options.smart_check_status) {
2896:
2897: switch (ataSmartStatus2(device)) {
2898:
2899: case 0:
2900: // The case where the disk health is OK
2901: pout("SMART overall-health self-assessment test result: PASSED\n");
2902: if (smart_thres_ok && find_failed_attr(&smartval, &smartthres, attribute_defs, 0)) {
2903: if (options.smart_vendor_attrib)
2904: pout("See vendor-specific Attribute list for marginal Attributes.\n\n");
2905: else {
2906: print_on();
2907: pout("Please note the following marginal Attributes:\n");
1.1.1.3 misho 2908: PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 2, options.output_format);
1.1 misho 2909: }
2910: returnval|=FAILAGE;
2911: }
2912: else
2913: pout("\n");
2914: break;
2915:
2916: case 1:
2917: // The case where the disk health is NOT OK
2918: print_on();
2919: pout("SMART overall-health self-assessment test result: FAILED!\n"
2920: "Drive failure expected in less than 24 hours. SAVE ALL DATA.\n");
2921: print_off();
2922: if (smart_thres_ok && find_failed_attr(&smartval, &smartthres, attribute_defs, 1)) {
2923: returnval|=FAILATTR;
2924: if (options.smart_vendor_attrib)
2925: pout("See vendor-specific Attribute list for failed Attributes.\n\n");
2926: else {
2927: print_on();
2928: pout("Failed Attributes:\n");
1.1.1.3 misho 2929: PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 1, options.output_format);
1.1 misho 2930: }
2931: }
2932: else
2933: pout("No failed Attributes found.\n\n");
2934: returnval|=FAILSTATUS;
2935: print_off();
2936: break;
2937:
2938: case -1:
2939: default:
2940: // Something went wrong with the SMART STATUS command.
2941: // The ATA SMART RETURN STATUS command provides the result in the ATA output
2942: // registers. Buggy ATA/SATA drivers and SAT Layers often do not properly
2943: // return the registers values.
2944: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
2945: if (!(smart_val_ok && smart_thres_ok)) {
2946: print_on();
2947: pout("SMART overall-health self-assessment test result: UNKNOWN!\n"
2948: "SMART Status, Attributes and Thresholds cannot be read.\n\n");
2949: }
2950: else if (find_failed_attr(&smartval, &smartthres, attribute_defs, 1)) {
2951: print_on();
2952: pout("SMART overall-health self-assessment test result: FAILED!\n"
2953: "Drive failure expected in less than 24 hours. SAVE ALL DATA.\n");
2954: print_off();
2955: returnval|=FAILATTR;
2956: returnval|=FAILSTATUS;
2957: if (options.smart_vendor_attrib)
2958: pout("See vendor-specific Attribute list for failed Attributes.\n\n");
2959: else {
2960: print_on();
2961: pout("Failed Attributes:\n");
1.1.1.3 misho 2962: PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 1, options.output_format);
1.1 misho 2963: }
2964: }
2965: else {
2966: pout("SMART overall-health self-assessment test result: PASSED\n");
2967: pout("Warning: This result is based on an Attribute check.\n");
2968: if (find_failed_attr(&smartval, &smartthres, attribute_defs, 0)) {
2969: if (options.smart_vendor_attrib)
2970: pout("See vendor-specific Attribute list for marginal Attributes.\n\n");
2971: else {
2972: print_on();
2973: pout("Please note the following marginal Attributes:\n");
1.1.1.3 misho 2974: PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 2, options.output_format);
1.1 misho 2975: }
2976: returnval|=FAILAGE;
2977: }
2978: else
2979: pout("\n");
2980: }
2981: print_off();
2982: break;
2983: } // end of switch statement
2984:
2985: print_off();
2986: } // end of checking SMART Status
2987:
2988: // Print general SMART values
2989: if (smart_val_ok && options.smart_general_values)
1.1.1.3 misho 2990: PrintGeneralSmartValues(&smartval, &drive, firmwarebugs);
1.1 misho 2991:
2992: // Print vendor-specific attributes
2993: if (smart_val_ok && options.smart_vendor_attrib) {
2994: print_on();
1.1.1.3 misho 2995: PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm,
1.1 misho 2996: (printing_is_switchable ? 2 : 0), options.output_format);
2997: print_off();
2998: }
2999:
3000: // If GP Log is supported use smart log directory for
3001: // error and selftest log support check.
3002: if ( isGeneralPurposeLoggingCapable(&drive)
3003: && ( options.smart_error_log || options.smart_selftest_log
3004: || options.retry_error_log || options.retry_selftest_log))
3005: need_smart_logdir = true;
3006:
3007: ata_smart_log_directory smartlogdir_buf, gplogdir_buf;
3008: const ata_smart_log_directory * smartlogdir = 0, * gplogdir = 0;
3009:
3010: // Read SMART Log directory
3011: if (need_smart_logdir) {
1.1.1.3 misho 3012: if (firmwarebugs.is_set(BUG_NOLOGDIR))
3013: smartlogdir = fake_logdir(&smartlogdir_buf, options);
3014: else if (ataReadLogDirectory(device, &smartlogdir_buf, false)) {
3015: pout("Read SMART Log Directory failed: %s\n\n", device->get_errmsg());
1.1 misho 3016: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3017: }
3018: else
3019: smartlogdir = &smartlogdir_buf;
3020: }
3021:
3022: // Read GP Log directory
3023: if (need_gp_logdir) {
1.1.1.3 misho 3024: if (firmwarebugs.is_set(BUG_NOLOGDIR))
3025: gplogdir = fake_logdir(&gplogdir_buf, options);
3026: else if (ataReadLogDirectory(device, &gplogdir_buf, true)) {
3027: pout("Read GP Log Directory failed\n\n");
1.1 misho 3028: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3029: }
3030: else
3031: gplogdir = &gplogdir_buf;
3032: }
3033:
3034: // Print log directories
1.1.1.3 misho 3035: if ((options.gp_logdir && gplogdir) || (options.smart_logdir && smartlogdir)) {
3036: if (firmwarebugs.is_set(BUG_NOLOGDIR))
3037: pout("Log Directories not read due to '-F nologdir' option\n\n");
3038: else
3039: PrintLogDirectories(gplogdir, smartlogdir);
3040: }
1.1 misho 3041:
3042: // Print log pages
3043: for (i = 0; i < options.log_requests.size(); i++) {
3044: const ata_log_request & req = options.log_requests[i];
3045:
3046: const char * type;
3047: unsigned max_nsectors;
3048: if (req.gpl) {
3049: type = "General Purpose";
3050: max_nsectors = GetNumLogSectors(gplogdir, req.logaddr, true);
3051: }
3052: else {
3053: type = "SMART";
3054: max_nsectors = GetNumLogSectors(smartlogdir, req.logaddr, false);
3055: }
3056:
3057: if (!max_nsectors) {
3058: if (!is_permissive()) {
3059: pout("%s Log 0x%02x does not exist (override with '-T permissive' option)\n", type, req.logaddr);
3060: continue;
3061: }
3062: max_nsectors = req.page+1;
3063: }
3064: if (max_nsectors <= req.page) {
3065: pout("%s Log 0x%02x has only %u sectors, output skipped\n", type, req.logaddr, max_nsectors);
3066: continue;
3067: }
3068:
3069: unsigned ns = req.nsectors;
3070: if (ns > max_nsectors - req.page) {
3071: if (req.nsectors != ~0U) // "FIRST-max"
3072: pout("%s Log 0x%02x has only %u sectors, output truncated\n", type, req.logaddr, max_nsectors);
3073: ns = max_nsectors - req.page;
3074: }
3075:
3076: // SMART log don't support sector offset, start with first sector
3077: unsigned offs = (req.gpl ? 0 : req.page);
3078:
3079: raw_buffer log_buf((offs + ns) * 512);
3080: bool ok;
3081: if (req.gpl)
3082: ok = ataReadLogExt(device, req.logaddr, 0x00, req.page, log_buf.data(), ns);
3083: else
3084: ok = ataReadSmartLog(device, req.logaddr, log_buf.data(), offs + ns);
3085: if (!ok)
3086: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3087: else
3088: PrintLogPages(type, log_buf.data() + offs*512, req.logaddr, req.page, ns, max_nsectors);
3089: }
3090:
3091: // Print SMART Extendend Comprehensive Error Log
3092: bool do_smart_error_log = options.smart_error_log;
3093: if (options.smart_ext_error_log) {
3094: bool ok = false;
3095: unsigned nsectors = GetNumLogSectors(gplogdir, 0x03, true);
3096: if (!nsectors)
1.1.1.3 misho 3097: pout("SMART Extended Comprehensive Error Log (GP Log 0x03) not supported\n\n");
1.1 misho 3098: else if (nsectors >= 256)
1.1.1.3 misho 3099: pout("SMART Extended Comprehensive Error Log size %u not supported\n\n", nsectors);
1.1 misho 3100: else {
3101: raw_buffer log_03_buf(nsectors * 512);
3102: ata_smart_exterrlog * log_03 = (ata_smart_exterrlog *)log_03_buf.data();
1.1.1.3 misho 3103: if (!ataReadExtErrorLog(device, log_03, nsectors, firmwarebugs)) {
3104: pout("Read SMART Extended Comprehensive Error Log failed\n\n");
1.1 misho 3105: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
1.1.1.3 misho 3106: }
1.1 misho 3107: else {
3108: if (PrintSmartExtErrorLog(log_03, nsectors, options.smart_ext_error_log))
3109: returnval |= FAILERR;
3110: ok = true;
3111: }
3112: }
3113:
3114: if (!ok) {
3115: if (options.retry_error_log)
3116: do_smart_error_log = true;
3117: else if (!do_smart_error_log)
3118: pout("Try '-l [xerror,]error' to read traditional SMART Error Log\n");
3119: }
3120: }
3121:
3122: // Print SMART error log
3123: if (do_smart_error_log) {
3124: if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x01, false))
3125: || (!smartlogdir && isSmartErrorLogCapable(&smartval, &drive) )
3126: || is_permissive() )) {
1.1.1.3 misho 3127: pout("SMART Error Log not supported\n\n");
1.1 misho 3128: }
3129: else {
3130: ata_smart_errorlog smarterror; memset(&smarterror, 0, sizeof(smarterror));
1.1.1.3 misho 3131: if (ataReadErrorLog(device, &smarterror, firmwarebugs)) {
3132: pout("Read SMART Error Log failed: %s\n\n", device->get_errmsg());
1.1 misho 3133: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3134: }
3135: else {
3136: // quiet mode is turned on inside PrintSmartErrorLog()
1.1.1.3 misho 3137: if (PrintSmartErrorlog(&smarterror, firmwarebugs))
1.1 misho 3138: returnval|=FAILERR;
3139: print_off();
3140: }
3141: }
3142: }
3143:
3144: // Print SMART Extendend Self-test Log
3145: bool do_smart_selftest_log = options.smart_selftest_log;
3146: if (options.smart_ext_selftest_log) {
3147: bool ok = false;
3148: unsigned nsectors = GetNumLogSectors(gplogdir, 0x07, true);
3149: if (!nsectors)
1.1.1.3 misho 3150: pout("SMART Extended Self-test Log (GP Log 0x07) not supported\n\n");
1.1 misho 3151: else if (nsectors >= 256)
1.1.1.3 misho 3152: pout("SMART Extended Self-test Log size %u not supported\n\n", nsectors);
1.1 misho 3153: else {
3154: raw_buffer log_07_buf(nsectors * 512);
3155: ata_smart_extselftestlog * log_07 = (ata_smart_extselftestlog *)log_07_buf.data();
1.1.1.3 misho 3156: if (!ataReadExtSelfTestLog(device, log_07, nsectors)) {
3157: pout("Read SMART Extended Self-test Log failed\n\n");
1.1 misho 3158: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
1.1.1.3 misho 3159: }
1.1 misho 3160: else {
3161: if (PrintSmartExtSelfTestLog(log_07, nsectors, options.smart_ext_selftest_log))
3162: returnval |= FAILLOG;
3163: ok = true;
3164: }
3165: }
3166:
3167: if (!ok) {
3168: if (options.retry_selftest_log)
3169: do_smart_selftest_log = true;
3170: else if (!do_smart_selftest_log)
3171: pout("Try '-l [xselftest,]selftest' to read traditional SMART Self Test Log\n");
3172: }
3173: }
3174:
3175: // Print SMART self-test log
3176: if (do_smart_selftest_log) {
3177: if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x06, false))
3178: || (!smartlogdir && isSmartTestLogCapable(&smartval, &drive) )
3179: || is_permissive() )) {
1.1.1.3 misho 3180: pout("SMART Self-test Log not supported\n\n");
1.1 misho 3181: }
3182: else {
3183: ata_smart_selftestlog smartselftest; memset(&smartselftest, 0, sizeof(smartselftest));
1.1.1.3 misho 3184: if (ataReadSelfTestLog(device, &smartselftest, firmwarebugs)) {
3185: pout("Read SMART Self-test Log failed: %s\n\n", device->get_errmsg());
1.1 misho 3186: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3187: }
3188: else {
3189: print_on();
1.1.1.3 misho 3190: if (ataPrintSmartSelfTestlog(&smartselftest, !printing_is_switchable, firmwarebugs))
1.1 misho 3191: returnval |= FAILLOG;
3192: print_off();
3193: pout("\n");
3194: }
3195: }
3196: }
3197:
3198: // Print SMART selective self-test log
3199: if (options.smart_selective_selftest_log) {
3200: ata_selective_self_test_log log;
3201:
3202: if (!isSupportSelectiveSelfTest(&smartval))
1.1.1.3 misho 3203: pout("Selective Self-tests/Logging not supported\n\n");
1.1 misho 3204: else if(ataReadSelectiveSelfTestLog(device, &log)) {
1.1.1.3 misho 3205: pout("Read SMART Selective Self-test Log failed: %s\n\n", device->get_errmsg());
1.1 misho 3206: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3207: }
3208: else {
3209: print_on();
3210: // If any errors were found, they are logged in the SMART Self-test log.
3211: // So there is no need to print the Selective Self Test log in silent
3212: // mode.
3213: if (!printing_is_switchable)
3214: ataPrintSelectiveSelfTestLog(&log, &smartval);
3215: print_off();
3216: pout("\n");
3217: }
3218: }
3219:
1.1.1.4 ! misho 3220: if(!sct_ok && (options.sct_temp_sts || options.sct_temp_hist || options.sct_temp_int
! 3221: || options.sct_erc_get || options.sct_erc_set ))
! 3222: pout("SCT Commands not supported\n\n");
1.1 misho 3223:
3224: // Print SCT status and temperature history table
3225: if (sct_ok && (options.sct_temp_sts || options.sct_temp_hist || options.sct_temp_int)) {
3226: for (;;) {
3227: if (options.sct_temp_sts || options.sct_temp_hist) {
3228: ata_sct_status_response sts;
3229: ata_sct_temperature_history_table tmh;
3230: if (!options.sct_temp_hist) {
3231: // Read SCT status only
3232: if (ataReadSCTStatus(device, &sts)) {
3233: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3234: break;
3235: }
3236: }
3237: else {
3238: if (!isSCTDataTableCapable(&drive)) {
1.1.1.3 misho 3239: pout("SCT Data Table command not supported\n\n");
1.1 misho 3240: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3241: break;
3242: }
3243: // Read SCT status and temperature history
3244: if (ataReadSCTTempHist(device, &tmh, &sts)) {
1.1.1.3 misho 3245: pout("Read SCT Temperature History failed\n\n");
1.1 misho 3246: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3247: break;
3248: }
3249: }
3250: if (options.sct_temp_sts)
3251: ataPrintSCTStatus(&sts);
3252: if (options.sct_temp_hist)
3253: ataPrintSCTTempHist(&tmh);
3254: pout("\n");
3255: }
3256: if (options.sct_temp_int) {
3257: // Set new temperature logging interval
3258: if (!isSCTFeatureControlCapable(&drive)) {
1.1.1.3 misho 3259: pout("SCT Feature Control command not supported\n\n");
1.1 misho 3260: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3261: break;
3262: }
3263: if (ataSetSCTTempInterval(device, options.sct_temp_int, options.sct_temp_int_pers)) {
1.1.1.3 misho 3264: pout("Write Temperature Logging Interval failed\n\n");
1.1 misho 3265: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3266: break;
3267: }
3268: pout("Temperature Logging Interval set to %u minute%s (%s)\n",
3269: options.sct_temp_int, (options.sct_temp_int == 1 ? "" : "s"),
3270: (options.sct_temp_int_pers ? "persistent" : "volatile"));
3271: }
3272: break;
3273: }
3274: }
3275:
3276: // SCT Error Recovery Control
3277: if (sct_ok && (options.sct_erc_get || options.sct_erc_set)) {
3278: if (!isSCTErrorRecoveryControlCapable(&drive)) {
1.1.1.3 misho 3279: pout("SCT Error Recovery Control command not supported\n\n");
1.1 misho 3280: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3281: }
3282: else {
3283: bool sct_erc_get = options.sct_erc_get;
3284: if (options.sct_erc_set) {
3285: // Set SCT Error Recovery Control
3286: if ( ataSetSCTErrorRecoveryControltime(device, 1, options.sct_erc_readtime )
3287: || ataSetSCTErrorRecoveryControltime(device, 2, options.sct_erc_writetime)) {
1.1.1.3 misho 3288: pout("SCT (Set) Error Recovery Control command failed\n");
1.1 misho 3289: if (!( (options.sct_erc_readtime == 70 && options.sct_erc_writetime == 70)
3290: || (options.sct_erc_readtime == 0 && options.sct_erc_writetime == 0)))
3291: pout("Retry with: 'scterc,70,70' to enable ERC or 'scterc,0,0' to disable\n");
3292: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3293: sct_erc_get = false;
3294: }
3295: else if (!sct_erc_get)
3296: ataPrintSCTErrorRecoveryControl(true, options.sct_erc_readtime,
3297: options.sct_erc_writetime);
3298: }
3299:
3300: if (sct_erc_get) {
3301: // Print SCT Error Recovery Control
3302: unsigned short read_timer, write_timer;
3303: if ( ataGetSCTErrorRecoveryControltime(device, 1, read_timer )
3304: || ataGetSCTErrorRecoveryControltime(device, 2, write_timer)) {
1.1.1.3 misho 3305: pout("SCT (Get) Error Recovery Control command failed\n");
1.1 misho 3306: if (options.sct_erc_set) {
3307: pout("The previous SCT (Set) Error Recovery Control command succeeded\n");
3308: ataPrintSCTErrorRecoveryControl(true, options.sct_erc_readtime,
3309: options.sct_erc_writetime);
3310: }
3311: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3312: }
3313: else
3314: ataPrintSCTErrorRecoveryControl(false, read_timer, write_timer);
3315: }
3316: pout("\n");
3317: }
3318: }
3319:
3320: // Print Device Statistics
3321: if (options.devstat_all_pages || options.devstat_ssd_page || !options.devstat_pages.empty()) {
3322: unsigned nsectors = GetNumLogSectors(gplogdir, 0x04, true);
3323: if (!nsectors)
1.1.1.3 misho 3324: pout("Device Statistics (GP Log 0x04) not supported\n\n");
1.1 misho 3325: else if (!print_device_statistics(device, nsectors, options.devstat_pages,
3326: options.devstat_all_pages, options.devstat_ssd_page))
3327: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3328: }
3329:
3330: // Print SATA Phy Event Counters
3331: if (options.sataphy) {
3332: unsigned nsectors = GetNumLogSectors(gplogdir, 0x11, true);
1.1.1.3 misho 3333: // Packet interface devices do not provide a log directory, check support bit
3334: if (!nsectors && (drive.words047_079[76-47] & 0x0401) == 0x0400)
3335: nsectors = 1;
1.1 misho 3336: if (!nsectors)
1.1.1.3 misho 3337: pout("SATA Phy Event Counters (GP Log 0x11) not supported\n\n");
1.1 misho 3338: else if (nsectors != 1)
1.1.1.3 misho 3339: pout("SATA Phy Event Counters with %u sectors not supported\n\n", nsectors);
1.1 misho 3340: else {
3341: unsigned char log_11[512] = {0, };
3342: unsigned char features = (options.sataphy_reset ? 0x01 : 0x00);
1.1.1.3 misho 3343: if (!ataReadLogExt(device, 0x11, features, 0, log_11, 1)) {
3344: pout("Read SATA Phy Event Counters failed\n\n");
1.1 misho 3345: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
1.1.1.3 misho 3346: }
1.1 misho 3347: else
3348: PrintSataPhyEventCounters(log_11, options.sataphy_reset);
3349: }
3350: }
3351:
1.1.1.2 misho 3352: // Set to standby (spindown) mode
3353: // (Above commands may spinup drive)
3354: if (options.set_standby_now) {
3355: if (!ata_nodata_command(device, ATA_STANDBY_IMMEDIATE)) {
3356: pout("ATA STANDBY IMMEDIATE command failed: %s\n", device->get_errmsg());
3357: returnval |= FAILSMART;
3358: }
3359: else
3360: pout("Device placed in STANDBY mode\n");
3361: }
3362:
1.1 misho 3363: // START OF THE TESTING SECTION OF THE CODE. IF NO TESTING, RETURN
3364: if (!smart_val_ok || options.smart_selftest_type == -1)
3365: return returnval;
3366:
3367: pout("=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===\n");
3368: // if doing a self-test, be sure it's supported by the hardware
3369: switch (options.smart_selftest_type) {
3370: case OFFLINE_FULL_SCAN:
3371: if (!isSupportExecuteOfflineImmediate(&smartval)){
1.1.1.3 misho 3372: pout("Execute Offline Immediate function not supported\n\n");
1.1 misho 3373: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3374: }
3375: break;
3376: case ABORT_SELF_TEST:
3377: case SHORT_SELF_TEST:
3378: case EXTEND_SELF_TEST:
3379: case SHORT_CAPTIVE_SELF_TEST:
3380: case EXTEND_CAPTIVE_SELF_TEST:
3381: if (!isSupportSelfTest(&smartval)){
1.1.1.3 misho 3382: pout("Self-test functions not supported\n\n");
1.1 misho 3383: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3384: }
3385: break;
3386: case CONVEYANCE_SELF_TEST:
3387: case CONVEYANCE_CAPTIVE_SELF_TEST:
3388: if (!isSupportConveyanceSelfTest(&smartval)){
1.1.1.3 misho 3389: pout("Conveyance Self-test functions not supported\n\n");
1.1 misho 3390: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3391: }
3392: break;
3393: case SELECTIVE_SELF_TEST:
3394: case SELECTIVE_CAPTIVE_SELF_TEST:
3395: if (!isSupportSelectiveSelfTest(&smartval)){
1.1.1.3 misho 3396: pout("Selective Self-test functions not supported\n\n");
1.1 misho 3397: failuretest(MANDATORY_CMD, returnval|=FAILSMART);
3398: }
3399: break;
3400: default:
3401: break; // Vendor specific type
3402: }
3403:
3404: // Now do the test. Note ataSmartTest prints its own error/success
3405: // messages
1.1.1.2 misho 3406: if (ataSmartTest(device, options.smart_selftest_type, options.smart_selftest_force,
3407: options.smart_selective_args, &smartval, sizes.sectors ))
1.1 misho 3408: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3409: else {
3410: // Tell user how long test will take to complete. This is tricky
3411: // because in the case of an Offline Full Scan, the completion
3412: // timer is volatile, and needs to be read AFTER the command is
3413: // given. If this will interrupt the Offline Full Scan, we don't
3414: // do it, just warn user.
3415: if (options.smart_selftest_type == OFFLINE_FULL_SCAN) {
3416: if (isSupportOfflineAbort(&smartval))
3417: pout("Note: giving further SMART commands will abort Offline testing\n");
3418: else if (ataReadSmartValues(device, &smartval)){
1.1.1.3 misho 3419: pout("Read SMART Data failed: %s\n\n", device->get_errmsg());
1.1 misho 3420: failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
3421: }
3422: }
3423:
3424: // Now say how long the test will take to complete
3425: int timewait = TestTime(&smartval, options.smart_selftest_type);
3426: if (timewait) {
3427: time_t t=time(NULL);
3428: if (options.smart_selftest_type == OFFLINE_FULL_SCAN) {
3429: t+=timewait;
3430: pout("Please wait %d seconds for test to complete.\n", (int)timewait);
3431: } else {
3432: t+=timewait*60;
3433: pout("Please wait %d minutes for test to complete.\n", (int)timewait);
3434: }
3435: pout("Test will complete after %s\n", ctime(&t));
3436:
3437: if ( options.smart_selftest_type != SHORT_CAPTIVE_SELF_TEST
3438: && options.smart_selftest_type != EXTEND_CAPTIVE_SELF_TEST
3439: && options.smart_selftest_type != CONVEYANCE_CAPTIVE_SELF_TEST
3440: && options.smart_selftest_type != SELECTIVE_CAPTIVE_SELF_TEST )
3441: pout("Use smartctl -X to abort test.\n");
3442: }
3443: }
3444:
3445: return returnval;
3446: }
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>