Annotation of embedaddon/smartmontools/ataprint.h, revision 1.1.1.2
1.1 misho 1: /*
2: * ataprint.h
3: *
4: * Home page of code is: http://smartmontools.sourceforge.net
5: *
6: * Copyright (C) 2002-9 Bruce Allen <smartmontools-support@lists.sourceforge.net>
1.1.1.2 ! misho 7: * Copyright (C) 2008-12 Christian Franke <smartmontools-support@lists.sourceforge.net>
1.1 misho 8: * Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
9: *
10: * This program is free software; you can redistribute it and/or modify
11: * it under the terms of the GNU General Public License as published by
12: * the Free Software Foundation; either version 2, or (at your option)
13: * any later version.
14: *
15: * You should have received a copy of the GNU General Public License
16: * (for example COPYING); if not, write to the Free
17: * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18: *
19: * This code was originally developed as a Senior Thesis by Michael Cornwell
20: * at the Concurrent Systems Laboratory (now part of the Storage Systems
21: * Research Center), Jack Baskin School of Engineering, University of
22: * California, Santa Cruz. http://ssrc.soe.ucsc.edu/
23: *
24: */
25:
26: #ifndef ATAPRINT_H_
27: #define ATAPRINT_H_
28:
1.1.1.2 ! misho 29: #define ATAPRINT_H_CVSID "$Id: ataprint.h 3530 2012-03-27 19:54:06Z chrfranke $\n"
1.1 misho 30:
31: #include <vector>
32:
33: // Request to dump a GP or SMART log
34: struct ata_log_request
35: {
36: bool gpl; // false: SMART, true: GP
37: unsigned char logaddr; // Log address
38: unsigned page; // First page (sector)
39: unsigned nsectors; // # Sectors
40:
41: ata_log_request()
42: : gpl(false), logaddr(0), page(0), nsectors(0)
43: { }
44: };
45:
46: // Options for ataPrintMain
47: struct ata_print_options
48: {
49: bool drive_info;
50: bool smart_check_status;
51: bool smart_general_values;
52: bool smart_vendor_attrib;
53: bool smart_error_log;
54: bool smart_selftest_log;
55: bool smart_selective_selftest_log;
56:
57: bool gp_logdir, smart_logdir;
58: unsigned smart_ext_error_log;
59: unsigned smart_ext_selftest_log;
60: bool retry_error_log, retry_selftest_log;
61:
62: std::vector<ata_log_request> log_requests;
63:
64: bool devstat_all_pages, devstat_ssd_page;
65: std::vector<int> devstat_pages;
66:
67: bool sct_temp_sts, sct_temp_hist;
68: bool sct_erc_get;
69: bool sct_erc_set;
70: unsigned sct_erc_readtime, sct_erc_writetime;
71: bool sataphy, sataphy_reset;
72:
73: bool smart_disable, smart_enable;
74: bool smart_auto_offl_disable, smart_auto_offl_enable;
75: bool smart_auto_save_disable, smart_auto_save_enable;
76:
77: int smart_selftest_type; // OFFLINE_FULL_SCAN, ..., see atacmds.h. -1 for no test
1.1.1.2 ! misho 78: bool smart_selftest_force; // Ignore already running test
1.1 misho 79: ata_selective_selftest_args smart_selective_args; // Extra args for selective self-test
80:
81: unsigned sct_temp_int;
82: bool sct_temp_int_pers;
83:
1.1.1.2 ! misho 84: enum { FMT_BRIEF = 0x01, FMT_HEX_ID = 0x02, FMT_HEX_VAL = 0x04 };
! 85: unsigned char output_format; // FMT_* flags
! 86:
1.1 misho 87: unsigned char fix_firmwarebug; // FIX_*, see atacmds.h
88: bool fix_swapped_id; // Fix swapped ID strings returned by some buggy drivers
89:
90: ata_vendor_attr_defs attribute_defs; // -v options
91:
92: bool ignore_presets; // Ignore presets from drive database
93: bool show_presets; // Show presets and exit
94: unsigned char powermode; // Skip check, if disk in idle or standby mode
95:
1.1.1.2 ! misho 96: bool get_set_used; // true if any get/set command is used
! 97: bool get_aam; // print Automatic Acoustic Management status
! 98: int set_aam; // disable(-1), enable(1..255->0..254) Automatic Acoustic Management
! 99: bool get_apm; // print Advanced Power Management status
! 100: int set_apm; // disable(-1), enable(2..255->1..254) Advanced Power Management
! 101: bool get_lookahead; // print read look-ahead status
! 102: int set_lookahead; // disable(-1), enable(1) read look-ahead
! 103: int set_standby; // set(1..255->0..254) standby timer
! 104: bool set_standby_now; // set drive to standby
! 105: bool get_security; // print ATA security status
! 106: bool set_security_freeze; // Freeze ATA security
! 107: bool get_wcache; // print write cache status
! 108: int set_wcache; // disable(-1), enable(1) write cache
! 109:
1.1 misho 110: ata_print_options()
111: : drive_info(false),
112: smart_check_status(false),
113: smart_general_values(false),
114: smart_vendor_attrib(false),
115: smart_error_log(false),
116: smart_selftest_log(false),
117: smart_selective_selftest_log(false),
118: gp_logdir(false), smart_logdir(false),
119: smart_ext_error_log(0),
120: smart_ext_selftest_log(0),
121: retry_error_log(false), retry_selftest_log(false),
122: devstat_all_pages(false), devstat_ssd_page(false),
123: sct_temp_sts(false), sct_temp_hist(false),
124: sct_erc_get(false),
125: sct_erc_set(false),
126: sct_erc_readtime(0), sct_erc_writetime(0),
127: sataphy(false), sataphy_reset(false),
128: smart_disable(false), smart_enable(false),
129: smart_auto_offl_disable(false), smart_auto_offl_enable(false),
130: smart_auto_save_disable(false), smart_auto_save_enable(false),
1.1.1.2 ! misho 131: smart_selftest_type(-1), smart_selftest_force(false),
1.1 misho 132: sct_temp_int(0), sct_temp_int_pers(false),
133: output_format(0),
134: fix_firmwarebug(FIX_NOTSPECIFIED),
135: fix_swapped_id(false),
136: ignore_presets(false),
137: show_presets(false),
1.1.1.2 ! misho 138: powermode(0),
! 139: get_set_used(false),
! 140: get_aam(false), set_aam(0),
! 141: get_apm(false), set_apm(0),
! 142: get_lookahead(false), set_lookahead(0),
! 143: set_standby(0), set_standby_now(false),
! 144: get_security(false), set_security_freeze(false),
! 145: get_wcache(false), set_wcache(0)
1.1 misho 146: { }
147: };
148:
149: int ataPrintMain(ata_device * device, const ata_print_options & options);
150:
151: #endif
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>