Annotation of embedaddon/smartmontools/ataprint.h, revision 1.1.1.3

1.1       misho       1: /*
                      2:  * ataprint.h
                      3:  *
                      4:  * Home page of code is: http://smartmontools.sourceforge.net
                      5:  *
                      6:  * Copyright (C) 2002-9 Bruce Allen <smartmontools-support@lists.sourceforge.net>
1.1.1.2   misho       7:  * Copyright (C) 2008-12 Christian Franke <smartmontools-support@lists.sourceforge.net>
1.1       misho       8:  * Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
                      9:  *
                     10:  * This program is free software; you can redistribute it and/or modify
                     11:  * it under the terms of the GNU General Public License as published by
                     12:  * the Free Software Foundation; either version 2, or (at your option)
                     13:  * any later version.
                     14:  *
                     15:  * You should have received a copy of the GNU General Public License
1.1.1.3 ! misho      16:  * (for example COPYING); If not, see <http://www.gnu.org/licenses/>.
1.1       misho      17:  *
                     18:  * This code was originally developed as a Senior Thesis by Michael Cornwell
                     19:  * at the Concurrent Systems Laboratory (now part of the Storage Systems
                     20:  * Research Center), Jack Baskin School of Engineering, University of
                     21:  * California, Santa Cruz. http://ssrc.soe.ucsc.edu/
                     22:  *
                     23:  */
                     24: 
                     25: #ifndef ATAPRINT_H_
                     26: #define ATAPRINT_H_
                     27: 
1.1.1.3 ! misho      28: #define ATAPRINT_H_CVSID "$Id: ataprint.h 3609 2012-09-20 21:24:43Z chrfranke $\n"
1.1       misho      29: 
                     30: #include <vector>
                     31: 
                     32: // Request to dump a GP or SMART log
                     33: struct ata_log_request
                     34: {
                     35:   bool gpl; // false: SMART, true: GP
                     36:   unsigned char logaddr; // Log address
                     37:   unsigned page; // First page (sector)
                     38:   unsigned nsectors; // # Sectors
                     39: 
                     40:   ata_log_request()
                     41:     : gpl(false), logaddr(0), page(0), nsectors(0)
                     42:     { }
                     43: };
                     44: 
                     45: // Options for ataPrintMain
                     46: struct ata_print_options
                     47: {
                     48:   bool drive_info;
1.1.1.3 ! misho      49:   int identify_word_level, identify_bit_level;
1.1       misho      50:   bool smart_check_status;
                     51:   bool smart_general_values;
                     52:   bool smart_vendor_attrib;
                     53:   bool smart_error_log;
                     54:   bool smart_selftest_log;
                     55:   bool smart_selective_selftest_log;
                     56: 
                     57:   bool gp_logdir, smart_logdir;
                     58:   unsigned smart_ext_error_log;
                     59:   unsigned smart_ext_selftest_log;
                     60:   bool retry_error_log, retry_selftest_log;
                     61: 
                     62:   std::vector<ata_log_request> log_requests;
                     63: 
                     64:   bool devstat_all_pages, devstat_ssd_page;
                     65:   std::vector<int> devstat_pages;
                     66: 
                     67:   bool sct_temp_sts, sct_temp_hist;
                     68:   bool sct_erc_get;
                     69:   bool sct_erc_set;
                     70:   unsigned sct_erc_readtime, sct_erc_writetime;
                     71:   bool sataphy, sataphy_reset;
                     72: 
                     73:   bool smart_disable, smart_enable;
                     74:   bool smart_auto_offl_disable, smart_auto_offl_enable;
                     75:   bool smart_auto_save_disable, smart_auto_save_enable;
                     76: 
                     77:   int smart_selftest_type; // OFFLINE_FULL_SCAN, ..., see atacmds.h. -1 for no test
1.1.1.2   misho      78:   bool smart_selftest_force; // Ignore already running test
1.1       misho      79:   ata_selective_selftest_args smart_selective_args; // Extra args for selective self-test
                     80: 
                     81:   unsigned sct_temp_int;
                     82:   bool sct_temp_int_pers;
                     83: 
1.1.1.2   misho      84:   enum { FMT_BRIEF = 0x01, FMT_HEX_ID = 0x02, FMT_HEX_VAL = 0x04 };
                     85:   unsigned char output_format; // FMT_* flags
                     86: 
1.1.1.3 ! misho      87:   firmwarebug_defs firmwarebugs; // -F options
1.1       misho      88:   bool fix_swapped_id; // Fix swapped ID strings returned by some buggy drivers
                     89: 
                     90:   ata_vendor_attr_defs attribute_defs; // -v options
                     91: 
                     92:   bool ignore_presets; // Ignore presets from drive database
                     93:   bool show_presets; // Show presets and exit
                     94:   unsigned char powermode; // Skip check, if disk in idle or standby mode
                     95: 
1.1.1.2   misho      96:   bool get_set_used; // true if any get/set command is used
                     97:   bool get_aam; // print Automatic Acoustic Management status
                     98:   int set_aam; // disable(-1), enable(1..255->0..254) Automatic Acoustic Management
                     99:   bool get_apm; // print Advanced Power Management status
                    100:   int set_apm; // disable(-1), enable(2..255->1..254) Advanced Power Management
                    101:   bool get_lookahead; // print read look-ahead status
                    102:   int set_lookahead; // disable(-1), enable(1) read look-ahead
                    103:   int set_standby; // set(1..255->0..254) standby timer
                    104:   bool set_standby_now; // set drive to standby
                    105:   bool get_security; // print ATA security status
                    106:   bool set_security_freeze; // Freeze ATA security
                    107:   bool get_wcache; // print write cache status
                    108:   int set_wcache; // disable(-1), enable(1) write cache
                    109: 
1.1       misho     110:   ata_print_options()
                    111:     : drive_info(false),
1.1.1.3 ! misho     112:       identify_word_level(-1), identify_bit_level(-1),
1.1       misho     113:       smart_check_status(false),
                    114:       smart_general_values(false),
                    115:       smart_vendor_attrib(false),
                    116:       smart_error_log(false),
                    117:       smart_selftest_log(false),
                    118:       smart_selective_selftest_log(false),
                    119:       gp_logdir(false), smart_logdir(false),
                    120:       smart_ext_error_log(0),
                    121:       smart_ext_selftest_log(0),
                    122:       retry_error_log(false), retry_selftest_log(false),
                    123:       devstat_all_pages(false), devstat_ssd_page(false),
                    124:       sct_temp_sts(false), sct_temp_hist(false),
                    125:       sct_erc_get(false),
                    126:       sct_erc_set(false),
                    127:       sct_erc_readtime(0), sct_erc_writetime(0),
                    128:       sataphy(false), sataphy_reset(false),
                    129:       smart_disable(false), smart_enable(false),
                    130:       smart_auto_offl_disable(false), smart_auto_offl_enable(false),
                    131:       smart_auto_save_disable(false), smart_auto_save_enable(false),
1.1.1.2   misho     132:       smart_selftest_type(-1), smart_selftest_force(false),
1.1       misho     133:       sct_temp_int(0), sct_temp_int_pers(false),
                    134:       output_format(0),
                    135:       fix_swapped_id(false),
                    136:       ignore_presets(false),
                    137:       show_presets(false),
1.1.1.2   misho     138:       powermode(0),
                    139:       get_set_used(false),
                    140:       get_aam(false), set_aam(0),
                    141:       get_apm(false), set_apm(0),
                    142:       get_lookahead(false), set_lookahead(0),
                    143:       set_standby(0), set_standby_now(false),
                    144:       get_security(false), set_security_freeze(false),
                    145:       get_wcache(false), set_wcache(0)
1.1       misho     146:     { }
                    147: };
                    148: 
                    149: int ataPrintMain(ata_device * device, const ata_print_options & options);
                    150: 
                    151: #endif

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>