Return to ataprint.h CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / smartmontools

v 6.2

    1: /*
    2:  * ataprint.h
    3:  *
    4:  * Home page of code is: http://smartmontools.sourceforge.net
    5:  *
    6:  * Copyright (C) 2002-9 Bruce Allen <smartmontools-support@lists.sourceforge.net>
    7:  * Copyright (C) 2008-12 Christian Franke <smartmontools-support@lists.sourceforge.net>
    8:  * Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
    9:  *
   10:  * This program is free software; you can redistribute it and/or modify
   11:  * it under the terms of the GNU General Public License as published by
   12:  * the Free Software Foundation; either version 2, or (at your option)
   13:  * any later version.
   14:  *
   15:  * You should have received a copy of the GNU General Public License
   16:  * (for example COPYING); If not, see <http://www.gnu.org/licenses/>.
   17:  *
   18:  * This code was originally developed as a Senior Thesis by Michael Cornwell
   19:  * at the Concurrent Systems Laboratory (now part of the Storage Systems
   20:  * Research Center), Jack Baskin School of Engineering, University of
   21:  * California, Santa Cruz. http://ssrc.soe.ucsc.edu/
   22:  *
   23:  */
   24: 
   25: #ifndef ATAPRINT_H_
   26: #define ATAPRINT_H_
   27: 
   28: #define ATAPRINT_H_CVSID "$Id: ataprint.h,v 1.1.1.4 2013/10/14 07:54:03 misho Exp $\n"
   29: 
   30: #include <vector>
   31: 
   32: // Request to dump a GP or SMART log
   33: struct ata_log_request
   34: {
   35:   bool gpl; // false: SMART, true: GP
   36:   unsigned char logaddr; // Log address
   37:   unsigned page; // First page (sector)
   38:   unsigned nsectors; // # Sectors
   39: 
   40:   ata_log_request()
   41:     : gpl(false), logaddr(0), page(0), nsectors(0)
   42:     { }
   43: };
   44: 
   45: // Options for ataPrintMain
   46: struct ata_print_options
   47: {
   48:   bool drive_info;
   49:   int identify_word_level, identify_bit_level;
   50:   bool smart_check_status;
   51:   bool smart_general_values;
   52:   bool smart_vendor_attrib;
   53:   bool smart_error_log;
   54:   bool smart_selftest_log;
   55:   bool smart_selective_selftest_log;
   56: 
   57:   bool gp_logdir, smart_logdir;
   58:   unsigned smart_ext_error_log;
   59:   unsigned smart_ext_selftest_log;
   60:   bool retry_error_log, retry_selftest_log;
   61: 
   62:   std::vector<ata_log_request> log_requests;
   63: 
   64:   bool devstat_all_pages, devstat_ssd_page;
   65:   std::vector<int> devstat_pages;
   66: 
   67:   bool sct_temp_sts, sct_temp_hist;
   68:   bool sct_erc_get;
   69:   bool sct_erc_set;
   70:   unsigned sct_erc_readtime, sct_erc_writetime;
   71:   bool sataphy, sataphy_reset;
   72: 
   73:   bool smart_disable, smart_enable;
   74:   bool smart_auto_offl_disable, smart_auto_offl_enable;
   75:   bool smart_auto_save_disable, smart_auto_save_enable;
   76: 
   77:   int smart_selftest_type; // OFFLINE_FULL_SCAN, ..., see atacmds.h. -1 for no test
   78:   bool smart_selftest_force; // Ignore already running test
   79:   ata_selective_selftest_args smart_selective_args; // Extra args for selective self-test
   80: 
   81:   unsigned sct_temp_int;
   82:   bool sct_temp_int_pers;
   83: 
   84:   enum { FMT_BRIEF = 0x01, FMT_HEX_ID = 0x02, FMT_HEX_VAL = 0x04 };
   85:   unsigned char output_format; // FMT_* flags
   86: 
   87:   firmwarebug_defs firmwarebugs; // -F options
   88:   bool fix_swapped_id; // Fix swapped ID strings returned by some buggy drivers
   89: 
   90:   ata_vendor_attr_defs attribute_defs; // -v options
   91: 
   92:   bool ignore_presets; // Ignore presets from drive database
   93:   bool show_presets; // Show presets and exit
   94:   unsigned char powermode; // Skip check, if disk in idle or standby mode
   95: 
   96:   bool get_set_used; // true if any get/set command is used
   97:   bool get_aam; // print Automatic Acoustic Management status
   98:   int set_aam; // disable(-1), enable(1..255->0..254) Automatic Acoustic Management
   99:   bool get_apm; // print Advanced Power Management status
  100:   int set_apm; // disable(-1), enable(2..255->1..254) Advanced Power Management
  101:   bool get_lookahead; // print read look-ahead status
  102:   int set_lookahead; // disable(-1), enable(1) read look-ahead
  103:   int set_standby; // set(1..255->0..254) standby timer
  104:   bool set_standby_now; // set drive to standby
  105:   bool get_security; // print ATA security status
  106:   bool set_security_freeze; // Freeze ATA security
  107:   bool get_wcache; // print write cache status
  108:   int set_wcache; // disable(-1), enable(1) write cache
  109:   bool sct_wcache_reorder_get; // print write cache reordering status
  110:   int sct_wcache_reorder_set; // disable(-1), enable(1) write cache reordering
  111: 
  112:   ata_print_options()
  113:     : drive_info(false),
  114:       identify_word_level(-1), identify_bit_level(-1),
  115:       smart_check_status(false),
  116:       smart_general_values(false),
  117:       smart_vendor_attrib(false),
  118:       smart_error_log(false),
  119:       smart_selftest_log(false),
  120:       smart_selective_selftest_log(false),
  121:       gp_logdir(false), smart_logdir(false),
  122:       smart_ext_error_log(0),
  123:       smart_ext_selftest_log(0),
  124:       retry_error_log(false), retry_selftest_log(false),
  125:       devstat_all_pages(false), devstat_ssd_page(false),
  126:       sct_temp_sts(false), sct_temp_hist(false),
  127:       sct_erc_get(false),
  128:       sct_erc_set(false),
  129:       sct_erc_readtime(0), sct_erc_writetime(0),
  130:       sataphy(false), sataphy_reset(false),
  131:       smart_disable(false), smart_enable(false),
  132:       smart_auto_offl_disable(false), smart_auto_offl_enable(false),
  133:       smart_auto_save_disable(false), smart_auto_save_enable(false),
  134:       smart_selftest_type(-1), smart_selftest_force(false),
  135:       sct_temp_int(0), sct_temp_int_pers(false),
  136:       output_format(0),
  137:       fix_swapped_id(false),
  138:       ignore_presets(false),
  139:       show_presets(false),
  140:       powermode(0),
  141:       get_set_used(false),
  142:       get_aam(false), set_aam(0),
  143:       get_apm(false), set_apm(0),
  144:       get_lookahead(false), set_lookahead(0),
  145:       set_standby(0), set_standby_now(false),
  146:       get_security(false), set_security_freeze(false),
  147:       get_wcache(false), set_wcache(0),
  148:       sct_wcache_reorder_get(false), sct_wcache_reorder_set(0)
  149:     { }
  150: };
  151: 
  152: int ataPrintMain(ata_device * device, const ata_print_options & options);
  153: 
  154: #endif