--- embedaddon/smartmontools/configure	2012/10/09 09:36:45	1.1.1.2
+++ embedaddon/smartmontools/configure	2013/07/22 01:17:35	1.1.1.3
@@ -1,13 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for smartmontools 5.43.
+# Generated by GNU Autoconf 2.69 for smartmontools 6.1.
 #
 # Report bugs to <smartmontools-support@lists.sourceforge.net>.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -136,6 +134,31 @@ export LANGUAGE
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -169,7 +192,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" );
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -214,21 +238,25 @@ IFS=$as_save_IFS
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-	# neutralization value for shells without unset; and this also
-	# works around shells that cannot unset nonexistent variables.
-	# Preserve -v and -x to the replacement shell.
-	BASH_ENV=/dev/null
-	ENV=/dev/null
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-	export CONFIG_SHELL
-	case $- in # ((((
-	  *v*x* | *x*v* ) as_opts=-vx ;;
-	  *v* ) as_opts=-v ;;
-	  *x* ) as_opts=-x ;;
-	  * ) as_opts= ;;
-	esac
-	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -331,6 +359,14 @@ $as_echo X"$as_dir" |
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -452,6 +488,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -486,16 +526,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -507,28 +547,8 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -560,8 +580,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='smartmontools'
 PACKAGE_TARNAME='smartmontools'
-PACKAGE_VERSION='5.43'
-PACKAGE_STRING='smartmontools 5.43'
+PACKAGE_VERSION='6.1'
+PACKAGE_STRING='smartmontools 6.1'
 PACKAGE_BUGREPORT='smartmontools-support@lists.sourceforge.net'
 PACKAGE_URL=''
 
@@ -608,8 +628,6 @@ LTLIBOBJS
 LIBOBJS
 OS_WIN64_FALSE
 OS_WIN64_TRUE
-OS_WIN32_WINDMC_FALSE
-OS_WIN32_WINDMC_TRUE
 OS_WIN32_NSIS_FALSE
 OS_WIN32_NSIS_TRUE
 OS_WIN32_MINGW_FALSE
@@ -622,6 +640,7 @@ OS_DARWIN_FALSE
 OS_DARWIN_TRUE
 DRIVEDB_BRANCH
 os_man_filter
+os_mailer
 os_dltools
 os_libs
 os_deps
@@ -1266,8 +1285,6 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1353,7 +1370,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures smartmontools 5.43 to adapt to many kinds of systems.
+\`configure' configures smartmontools 6.1 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1423,7 +1440,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of smartmontools 5.43:";;
+     short | recursive ) echo "Configuration of smartmontools 6.1:";;
    esac
   cat <<\_ACEOF
 
@@ -1431,10 +1448,13 @@ Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-maintainer-mode
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --disable-drivedb       Disables drive database file
   --enable-savestates     Enables default smartd state files
   --enable-attributelog   Enables default smartd attribute log files
@@ -1555,10 +1575,10 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-smartmontools configure 5.43
-generated by GNU Autoconf 2.68
+smartmontools configure 6.1
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1645,52 +1665,6 @@ fi
 
 } # ac_fn_c_try_compile
 
-# ac_fn_cxx_try_link LINENO
-# -------------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_link ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext conftest$ac_exeext
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-  # interfere with the next link command; also delete a directory that is
-  # left behind by Apple's compiler.  We do this before executing the actions.
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_link
-
 # ac_fn_cxx_try_cpp LINENO
 # ------------------------
 # Try to preprocess conftest.$ac_ext, and return whether this succeeded.
@@ -1946,6 +1920,52 @@ $as_echo "$ac_res" >&6; }
 
 } # ac_fn_cxx_check_type
 
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
 # ac_fn_cxx_check_func LINENO FUNC VAR
 # ------------------------------------
 # Tests whether FUNC exists, setting the cache variable VAR accordingly
@@ -2016,8 +2036,8 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by smartmontools $as_me 5.43, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+It was created by smartmontools $as_me 6.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -2275,7 +2295,7 @@ $as_echo "$as_me: loading site script $ac_site_file" >
       || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
@@ -2367,9 +2387,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 smartmontools_configure_date=`date -u +'%Y-%m-%d %T %Z'`
-smartmontools_cvs_tag=`echo '$Id: configure,v 1.1.1.2 2012/10/09 09:36:45 misho Exp $'`
-smartmontools_release_date=2012-06-30
-smartmontools_release_time="14:03:01 UTC"
+smartmontools_cvs_tag=`echo '$Id: configure,v 1.1.1.3 2013/07/22 01:17:35 misho Exp $'`
+smartmontools_release_date=2013-03-16
+smartmontools_release_time="14:35:27 UTC"
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2405,7 +2425,7 @@ _ACEOF
 ac_config_headers="$ac_config_headers config.h"
 
 
-am__api_version='1.11'
+am__api_version='1.12'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2473,7 +2493,7 @@ case $as_dir/ in #((
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2531,45 +2551,50 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
 
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
-
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -2581,6 +2606,16 @@ Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2607,8 +2642,8 @@ if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
 if test x"${install_sh}" != xset; then
@@ -2620,10 +2655,10 @@ if test x"${install_sh}" != xset; then
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -2642,7 +2677,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2682,7 +2717,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2733,7 +2768,7 @@ do
   test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
 	     'mkdir (GNU coreutils) '* | \
 	     'mkdir (coreutils) '* | \
@@ -2762,12 +2797,6 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2786,7 +2815,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2872,7 +2901,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='smartmontools'
- VERSION='5.43'
+ VERSION='6.1'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2900,6 +2929,12 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
@@ -2971,7 +3006,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3015,7 +3050,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CXX="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3167,7 +3202,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "C++ compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3210,7 +3245,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3269,7 +3304,7 @@ $as_echo "$ac_try_echo"; } >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot run C++ compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
     fi
   fi
 fi
@@ -3321,7 +3356,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -3468,7 +3503,7 @@ am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -3524,8 +3559,8 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -3560,16 +3595,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -3578,8 +3613,8 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -3587,7 +3622,7 @@ else
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -3663,7 +3698,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3703,7 +3738,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3756,7 +3791,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3797,7 +3832,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -3855,7 +3890,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3899,7 +3934,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3942,7 +3977,7 @@ fi
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -4095,8 +4130,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -4192,8 +4226,8 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -4228,16 +4262,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -4246,8 +4280,8 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -4255,7 +4289,7 @@ else
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -4327,8 +4361,8 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -4361,16 +4395,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -4379,8 +4413,8 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -4388,7 +4422,7 @@ else
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -4472,7 +4506,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4515,7 +4549,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4594,7 +4628,7 @@ fi
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -4627,7 +4661,7 @@ fi
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -4650,10 +4684,9 @@ case "${host}" in
     /usr/bin/uname | grep -i '^CYGWIN' >/dev/null; then
       as_fn_error $? "Build with MinGW on Cygwin requires cross-compilation, see INSTALL file." "$LINENO" 5
     fi
-    for ac_prog in ${host}-windmc windmc
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}windmc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windmc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
 if ${ac_cv_prog_WINDMC+:} false; then :
@@ -4668,8 +4701,8 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_WINDMC="$ac_prog"
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_WINDMC="${ac_tool_prefix}windmc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -4689,13 +4722,63 @@ $as_echo "no" >&6; }
 fi
 
 
-  test -n "$WINDMC" && break
+fi
+if test -z "$ac_cv_prog_WINDMC"; then
+  ac_ct_WINDMC=$WINDMC
+  # Extract the first word of "windmc", so it can be a program name with args.
+set dummy windmc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_WINDMC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_WINDMC"; then
+  ac_cv_prog_ac_ct_WINDMC="$ac_ct_WINDMC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_WINDMC="windmc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
+  done
+IFS=$as_save_IFS
 
-    for ac_prog in ${host}-windres windres
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+fi
+fi
+ac_ct_WINDMC=$ac_cv_prog_ac_ct_WINDMC
+if test -n "$ac_ct_WINDMC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDMC" >&5
+$as_echo "$ac_ct_WINDMC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_WINDMC" = x; then
+    WINDMC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    WINDMC=$ac_ct_WINDMC
+  fi
+else
+  WINDMC="$ac_cv_prog_WINDMC"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windres; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
 if ${ac_cv_prog_WINDRES+:} false; then :
@@ -4710,8 +4793,8 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_WINDRES="$ac_prog"
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_WINDRES="${ac_tool_prefix}windres"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -4731,10 +4814,61 @@ $as_echo "no" >&6; }
 fi
 
 
-  test -n "$WINDRES" && break
+fi
+if test -z "$ac_cv_prog_WINDRES"; then
+  ac_ct_WINDRES=$WINDRES
+  # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_WINDRES+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_WINDRES"; then
+  ac_cv_prog_ac_ct_WINDRES="$ac_ct_WINDRES" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_WINDRES="windres"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
+  done
+IFS=$as_save_IFS
 
+fi
+fi
+ac_ct_WINDRES=$ac_cv_prog_ac_ct_WINDRES
+if test -n "$ac_ct_WINDRES"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDRES" >&5
+$as_echo "$ac_ct_WINDRES" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
+  if test "x$ac_ct_WINDRES" = x; then
+    WINDRES=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    WINDRES=$ac_ct_WINDRES
+  fi
+else
+  WINDRES="$ac_cv_prog_WINDRES"
+fi
+
+
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking checking for makensis" >&5
 $as_echo_n "checking checking for makensis... " >&6; }
     if test -z "$MAKENSIS"; then
@@ -4775,237 +4909,11 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $is_svn_build" >&5
 $as_echo "$is_svn_build" >&6; }
 
-#  AC_SEARCH_LIBS (FUNCTION, SEARCH-LIBS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES])
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socket" >&5
-$as_echo_n "checking for library containing socket... " >&6; }
-if ${ac_cv_search_socket+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char socket ();
-int
-main ()
-{
-return socket ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' socket; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  if ac_fn_cxx_try_link "$LINENO"; then :
-  ac_cv_search_socket=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext
-  if ${ac_cv_search_socket+:} false; then :
-  break
-fi
-done
-if ${ac_cv_search_socket+:} false; then :
-
-else
-  ac_cv_search_socket=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socket" >&5
-$as_echo "$ac_cv_search_socket" >&6; }
-ac_res=$ac_cv_search_socket
-if test "$ac_res" != no; then :
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
-$as_echo_n "checking for library containing gethostbyname... " >&6; }
-if ${ac_cv_search_gethostbyname+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' nsl; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  if ac_fn_cxx_try_link "$LINENO"; then :
-  ac_cv_search_gethostbyname=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext
-  if ${ac_cv_search_gethostbyname+:} false; then :
-  break
-fi
-done
-if ${ac_cv_search_gethostbyname+:} false; then :
-
-else
-  ac_cv_search_gethostbyname=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5
-$as_echo "$ac_cv_search_gethostbyname" >&6; }
-ac_res=$ac_cv_search_gethostbyname
-if test "$ac_res" != no; then :
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing getaddrinfo" >&5
-$as_echo_n "checking for library containing getaddrinfo... " >&6; }
-if ${ac_cv_search_getaddrinfo+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getaddrinfo ();
-int
-main ()
-{
-return getaddrinfo ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' nsl; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  if ac_fn_cxx_try_link "$LINENO"; then :
-  ac_cv_search_getaddrinfo=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext
-  if ${ac_cv_search_getaddrinfo+:} false; then :
-  break
-fi
-done
-if ${ac_cv_search_getaddrinfo+:} false; then :
-
-else
-  ac_cv_search_getaddrinfo=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_getaddrinfo" >&5
-$as_echo "$ac_cv_search_getaddrinfo" >&6; }
-ac_res=$ac_cv_search_getaddrinfo
-if test "$ac_res" != no; then :
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing getdomainname" >&5
-$as_echo_n "checking for library containing getdomainname... " >&6; }
-if ${ac_cv_search_getdomainname+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getdomainname ();
-int
-main ()
-{
-return getdomainname ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' nsl; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  if ac_fn_cxx_try_link "$LINENO"; then :
-  ac_cv_search_getdomainname=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext
-  if ${ac_cv_search_getdomainname+:} false; then :
-  break
-fi
-done
-if ${ac_cv_search_getdomainname+:} false; then :
-
-else
-  ac_cv_search_getdomainname=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_getdomainname" >&5
-$as_echo "$ac_cv_search_getdomainname" >&6; }
-ac_res=$ac_cv_search_getdomainname
-if test "$ac_res" != no; then :
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
 # Note: On Linux, clock_gettime() requires -lrt which implies -lpthreads
 # Check ommitted for now, gettimeofday() provides reasonable precision
 # AC_SEARCH_LIBS(clock_gettime, rt)
 
+
 ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -5130,7 +5038,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=cpp
@@ -5156,7 +5064,7 @@ do
     for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
@@ -5222,7 +5130,7 @@ do
     for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
@@ -5655,50 +5563,6 @@ else
 fi
 
 
-for ac_func in getdomainname
-do :
-  ac_fn_cxx_check_func "$LINENO" "getdomainname" "ac_cv_func_getdomainname"
-if test "x$ac_cv_func_getdomainname" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_GETDOMAINNAME 1
-_ACEOF
-
-fi
-done
-
-for ac_func in gethostname
-do :
-  ac_fn_cxx_check_func "$LINENO" "gethostname" "ac_cv_func_gethostname"
-if test "x$ac_cv_func_gethostname" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_GETHOSTNAME 1
-_ACEOF
-
-fi
-done
-
-for ac_func in getaddrinfo
-do :
-  ac_fn_cxx_check_func "$LINENO" "getaddrinfo" "ac_cv_func_getaddrinfo"
-if test "x$ac_cv_func_getaddrinfo" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_GETADDRINFO 1
-_ACEOF
-
-fi
-done
-
-for ac_func in gethostbyname
-do :
-  ac_fn_cxx_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
-if test "x$ac_cv_func_gethostbyname" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_GETHOSTBYNAME 1
-_ACEOF
-
-fi
-done
-
 for ac_func in sigset
 do :
   ac_fn_cxx_check_func "$LINENO" "sigset" "ac_cv_func_sigset"
@@ -5967,7 +5831,7 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confde
      ;; #(
    *)
      as_fn_error $? "unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5  ;;
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
  esac
 
 
@@ -6064,7 +5928,7 @@ $as_echo_n "checking for systemdsystemunitdir... " >&6
 $as_echo "${systemdsystemunitdir:-no}" >&6; }
    fi
    case "$with_systemdsystemunitdir:$sysconfdir:$systemdsystemunitdir" in
-     yes:*:) as_fn_error $? "Location of systemd service files not found" "$LINENO" 5  ;;
+     yes:*:) as_fn_error $? "Location of systemd service files not found" "$LINENO" 5 ;;
      yes:*:*|auto:*:|auto:/etc:*) ;;
      *) systemdsystemunitdir='${prefix}'$systemdsystemunitdir ;;
    esac ;;
@@ -6104,7 +5968,7 @@ $as_echo_n "checking for init (rc) directory... " >&6;
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${initddir:-no}" >&5
 $as_echo "${initddir:-no}" >&6; }
     case "$with_initscriptdir:$initddir" in
-      yes:) as_fn_error $? "Location of init scripts not found" "$LINENO" 5  ;;
+      yes:) as_fn_error $? "Location of init scripts not found" "$LINENO" 5 ;;
     esac ;;
   auto:*|no:*) ;;
   *) initddir="$with_initscriptdir" ;;
@@ -6247,7 +6111,7 @@ if test "${with_os_deps+set}" = set; then :
   withval=$with_os_deps;  for x in $with_os_deps; do
       case $x in
         *.o) ;;
-        *) as_fn_error $? "non-object file specified by --with-os-deps" "$LINENO" 5  ;;
+        *) as_fn_error $? "non-object file specified by --with-os-deps" "$LINENO" 5 ;;
       esac
     done
 
@@ -6428,7 +6292,7 @@ releaseversion='${PACKAGE}-${VERSION}'
 # Set platform-specific modules and symbols
 os_libs=
 os_dltools='curl wget lynx'
-os_mailer=
+os_mailer=mail
 os_darwin=no
 os_solaris=no
 os_win32=no
@@ -6437,11 +6301,11 @@ os_win64=no
 os_man_filter=
 case "${host}" in
   *-*-linux*)
-    os_deps='os_linux.o cciss.o'
+    os_deps='os_linux.o cciss.o dev_areca.o'
     os_man_filter=Linux
     ;;
   *-*-freebsd*|*-*-dragonfly*|*-*-kfreebsd*-gnu*)
-    os_deps='os_freebsd.o cciss.o'
+    os_deps='os_freebsd.o cciss.o dev_areca.o'
     os_libs='-lcam'
     os_dltools='curl wget lynx fetch'
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libusb20_dev_get_device_desc in -lusb" >&5
@@ -6515,19 +6379,19 @@ fi
     os_man_filter=OpenBSD
     ;;
   *-*-cygwin*)
-    os_deps='os_win32.o'
+    os_deps='os_win32.o dev_areca.o'
     os_win32=yes
     os_man_filter=Cygwin
     ;;
   x86_64-*-mingw*)
-    os_deps='os_win32.o'
+    os_deps='os_win32.o dev_areca.o'
     os_win32=yes
     os_win32_mingw=yes
     os_win64=yes
     os_man_filter=Windows
     ;;
   *-*-mingw*)
-    os_deps='os_win32.o'
+    os_deps='os_win32.o dev_areca.o'
     os_win32=yes
     os_win32_mingw=yes
     os_man_filter=Windows
@@ -6569,14 +6433,8 @@ $as_echo "$os_new_interface" >&6; }
 
 
 
-if test -n "$os_mailer"; then
 
-cat >>confdefs.h <<_ACEOF
-#define DEFAULT_MAILER "$os_mailer"
-_ACEOF
 
-fi
-
 # Create drivedb.h update branch name from version: 5.41[.X] -> RELEASE_5_41_DRIVEDB
 DRIVEDB_BRANCH=`echo $VERSION | sed 's,^\([0-9]*\.[0-9]*\)\..*$,\1,' \
                 | sed -n 's,^\([0-9][0-9]*\)\.\([0-9][0-9]*\)$,RELEASE_\1_\2_DRIVEDB,p'`
@@ -6626,14 +6484,6 @@ else
   OS_WIN32_NSIS_FALSE=
 fi
 
- if test -n "$WINDMC" && test "$WINDMC" != "no" && test -n "$WINDRES"; then
-  OS_WIN32_WINDMC_TRUE=
-  OS_WIN32_WINDMC_FALSE='#'
-else
-  OS_WIN32_WINDMC_TRUE='#'
-  OS_WIN32_WINDMC_FALSE=
-fi
-
  if test "$os_win64" = "yes"; then
   OS_WIN64_TRUE=
   OS_WIN64_FALSE='#'
@@ -6789,6 +6639,14 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -6874,10 +6732,6 @@ if test -z "${OS_WIN32_NSIS_TRUE}" && test -z "${OS_WI
   as_fn_error $? "conditional \"OS_WIN32_NSIS\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-if test -z "${OS_WIN32_WINDMC_TRUE}" && test -z "${OS_WIN32_WINDMC_FALSE}"; then
-  as_fn_error $? "conditional \"OS_WIN32_WINDMC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
 if test -z "${OS_WIN64_TRUE}" && test -z "${OS_WIN64_FALSE}"; then
   as_fn_error $? "conditional \"OS_WIN64\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -7180,16 +7034,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -7249,29 +7103,17 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
 
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
@@ -7291,8 +7133,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by smartmontools $as_me 5.43, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+This file was extended by smartmontools $as_me 6.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -7357,11 +7199,11 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-smartmontools config.status 5.43
-configured by $0, generated by GNU Autoconf 2.68,
+smartmontools config.status 6.1
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -7452,7 +7294,7 @@ fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
@@ -7490,7 +7332,7 @@ do
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -7808,7 +7650,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -7836,7 +7678,7 @@ do
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -7863,7 +7705,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
 
     case $ac_tag in
     *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -8098,7 +7940,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -8132,21 +7974,19 @@ $as_echo X"$mf" |
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
     test -z "am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||