version 1.1.1.3, 2013/07/22 01:17:36
|
version 1.1.1.4, 2013/10/14 07:54:04
|
Line 553 such as:
|
Line 553 such as:
|
connected to a HighPoint RocketRAID controller. The integer L is the |
connected to a HighPoint RocketRAID controller. The integer L is the |
controller id, the integer M is the channel number, and the integer N |
controller id, the integer M is the channel number, and the integer N |
is the PMPort number if it is available. The allowed values of L are |
is the PMPort number if it is available. The allowed values of L are |
from 1 to 4 inclusive, M are from 1 to 16 inclusive and N from 1 to 4 | from 1 to 4 inclusive, M are from 1 to 128 inclusive and N from 1 to 4 |
if PMPort available. And also these values are limited by the model |
if PMPort available. And also these values are limited by the model |
of the HighPoint RocketRAID controller. |
of the HighPoint RocketRAID controller. |
Use syntax such as: |
Use syntax such as: |
Line 883 The write cache is usually enabled by default.
|
Line 883 The write cache is usually enabled by default.
|
\- [SCSI] [NEW EXPERIMENTAL SMARTCTL FEATURE] |
\- [SCSI] [NEW EXPERIMENTAL SMARTCTL FEATURE] |
Gets/sets the \'Write Cache Enable\' (WCE) bit (if supported). |
Gets/sets the \'Write Cache Enable\' (WCE) bit (if supported). |
The write cache is usually enabled by default. |
The write cache is usually enabled by default. |
|
|
|
.I wcreorder[,on|off] |
|
\- [ATA only] [NEW EXPERIMENTAL SMARTCTL FEATURE] |
|
Gets/sets Write Cache Reordering. |
|
If it is disabled (off), disk write scheduling is executed on a |
|
first-in-first-out (FIFO) basis. If Write Cache Reordering is enabled (on), |
|
then disk write scheduling may be reordered by the drive. If write cache is |
|
disabled, the current Write Cache Reordering state is remembered but has |
|
no effect on non-cached writes, which are always written in the order received. |
|
The state of Write Cache Reordering has no effect on either NCQ or LCQ queued |
|
commands. |
|
|
.I rcache[,on|off] |
.I rcache[,on|off] |
\- [SCSI only] [NEW EXPERIMENTAL SMARTCTL FEATURE] |
\- [SCSI only] [NEW EXPERIMENTAL SMARTCTL FEATURE] |