Annotation of embedaddon/smartmontools/smartctl.8.in, revision 1.1
1.1 ! misho 1: .ig
! 2: Copyright (C) 2002-10 Bruce Allen <smartmontools-support@lists.sourceforge.net>
! 3:
! 4: $Id: smartctl.8.in 3452 2011-10-15 15:22:09Z chrfranke $
! 5:
! 6: This program is free software; you can redistribute it and/or modify it
! 7: under the terms of the GNU General Public License as published by the Free
! 8: Software Foundation; either version 2, or (at your option) any later
! 9: version.
! 10:
! 11: You should have received a copy of the GNU General Public License (for
! 12: example COPYING); if not, write to the Free Software Foundation, Inc., 675
! 13: Mass Ave, Cambridge, MA 02139, USA.
! 14:
! 15: This code was originally developed as a Senior Thesis by Michael Cornwell
! 16: at the Concurrent Systems Laboratory (now part of the Storage Systems
! 17: Research Center), Jack Baskin School of Engineering, University of
! 18: California, Santa Cruz. http://ssrc.soe.ucsc.edu/
! 19:
! 20: ..
! 21: .TH SMARTCTL 8 CURRENT_SVN_DATE CURRENT_SVN_VERSION CURRENT_SVN_DATE
! 22: .SH NAME
! 23: \fBsmartctl\fP \- Control and Monitor Utility for SMART Disks
! 24:
! 25: .SH SYNOPSIS
! 26: .B smartctl [options] device
! 27:
! 28: .\" %IF NOT OS Windows
! 29: .SH FULL PATH
! 30: .B /usr/local/sbin/smartctl
! 31:
! 32: .\" %ENDIF NOT OS Windows
! 33: .SH PACKAGE VERSION
! 34: CURRENT_SVN_VERSION CURRENT_SVN_DATE CURRENT_SVN_REV
! 35:
! 36: .SH DESCRIPTION
! 37: .\" %IF NOT OS ALL
! 38: .\"! [This man page is generated for the OS_MAN_FILTER version of smartmontools.
! 39: .\"! It does not contain info specific to other platforms.]
! 40: .\"! .PP
! 41: .\" %ENDIF NOT OS ALL
! 42: \fBsmartctl\fP controls the Self\-Monitoring, Analysis and Reporting
! 43: Technology (SMART) system built into many ATA\-3 and later ATA, IDE and
! 44: SCSI\-3 hard drives. The purpose of SMART is to monitor the reliability
! 45: of the hard drive and predict drive failures, and to carry out
! 46: different types of drive self\-tests. This version of \fBsmartctl\fP
! 47: is compatible with ATA/ATAPI\-7 and earlier standards (see REFERENCES
! 48: below)
! 49:
! 50: \fBsmartctl\fP is a command line utility designed to perform SMART
! 51: tasks such as printing the SMART self\-test and error logs, enabling
! 52: and disabling SMART automatic testing, and initiating device
! 53: self\-tests. Note: if the user issues a SMART command that is
! 54: (apparently) not implemented by the device, \fBsmartctl\fP will print
! 55: a warning message but issue the command anyway (see the \fB\-T,
! 56: \-\-tolerance\fP option below). This should not cause problems: on
! 57: most devices, unimplemented SMART commands issued to a drive are
! 58: ignored and/or return an error.
! 59:
! 60: \fBsmartctl\fP also provides support for polling TapeAlert messages
! 61: from SCSI tape drives and changers.
! 62:
! 63: The user must specify the device to be controlled or interrogated as
! 64: the final argument to \fBsmartctl\fP. The command set used by the device
! 65: is often derived from the device path but may need help with the \'\-d\'
! 66: option (for more information see the section on "ATA, SCSI command sets
! 67: and SAT" below). Device paths are as follows:
! 68: .\" %IF OS Linux
! 69: .IP \fBLINUX\fP: 9
! 70: Use the forms \fB"/dev/hd[a\-t]"\fP for IDE/ATA devices, and
! 71: \fB"/dev/sd[a\-z]"\fP for SCSI devices. For SCSI Tape Drives and
! 72: Changers with TapeAlert support use the devices \fB"/dev/nst*"\fP and
! 73: \fB"/dev/sg*"\fP. For SATA disks accessed with libata, use
! 74: \fB"/dev/sd[a\-z]"\fP and append \fB"\-d ata"\fP. For disks behind
! 75: 3ware controllers you may need \fB"/dev/sd[a\-z]"\fP or
! 76: \fB"/dev/twe[0\-9]"\fP, \fB"/dev/twa[0\-9]"\fP or \fB"/dev/twl[0\-9]"\fP: see details
! 77: below. For disks behind HighPoint RocketRAID controllers you may need
! 78: \fB"/dev/sd[a\-z]"\fP. For disks behind Areca SATA RAID controllers,
! 79: you need \fB"/dev/sg[2\-9]"\fP (note that smartmontools interacts with
! 80: the Areca controllers via a SCSI generic device which is different
! 81: than the SCSI device used for reading and writing data)!
! 82: .\" %ENDIF OS Linux
! 83: .\" %IF OS Darwin
! 84: .IP \fBDARWIN\fP: 9
! 85: Use the forms \fB/dev/disk[0\-9]\fP or equivalently \fBdisk[0\-9]\fP or equivalently
! 86: \fB/dev/rdisk[0\-9]\fP. Long forms are also available: please use \'\-h\' to see some
! 87: examples. Note that there is currently no Darwin SCSI support.
! 88: .\" %ENDIF OS Darwin
! 89: .\" %IF OS FreeBSD
! 90: .IP \fBFREEBSD\fP: 9
! 91: Use the forms \fB"/dev/ad[0\-9]+"\fP for IDE/ATA
! 92: devices and \fB"/dev/da[0\-9]+"\fP or \fB"/dev/pass[0\-9]+"\fP for SCSI devices.
! 93: For SATA devices on AHCI bus use \fB"/dev/ada[0\-9]+"\fP format.
! 94: .\" %ENDIF OS FreeBSD
! 95: .\" %IF OS NetBSD OpenBSD
! 96: .IP \fBNETBSD/OPENBSD\fP: 9
! 97: Use the form \fB"/dev/wd[0\-9]+c"\fP for IDE/ATA
! 98: devices. For SCSI disk and tape devices, use the device names
! 99: \fB"/dev/sd[0\-9]+c"\fP and \fB"/dev/st[0\-9]+c"\fP respectively.
! 100: Be sure to specify the correct "whole disk" partition letter for
! 101: your architecture.
! 102: .\" %ENDIF OS NetBSD OpenBSD
! 103: .\" %IF OS Solaris
! 104: .IP \fBSOLARIS\fP: 9
! 105: Use the forms \fB"/dev/rdsk/c?t?d?s?"\fP for IDE/ATA and SCSI disk
! 106: devices, and \fB"/dev/rmt/*"\fP for SCSI tape devices.
! 107: .\" %ENDIF OS Solaris
! 108: .\" %IF OS Windows
! 109: .IP \fBWINDOWS\ 9x/ME\fP: 9
! 110: Use the forms \fB"/dev/hd[a\-d]"\fP for standard IDE/ATA devices
! 111: accessed via SMARTVSD.VXD, and \fB"/dev/hd[e\-h]"\fP for additional devices
! 112: accessed via a patched SMARTVSE.VXD (see INSTALL file for details).
! 113: Use the form \fB"/dev/scsi[0\-9][0\-f]"\fP for SCSI devices via an aspi dll
! 114: on ASPI adapter 0\-9, ID 0\-15. The prefix \fB"/dev/"\fP is optional.
! 115: .\" %ENDIF OS Windows
! 116: .\" %IF OS Windows Cygwin
! 117: .IP \fBWINDOWS\ NT4/2000/XP/2003/Vista/Win7/2008\fP: 9
! 118: Use the forms \fB"/dev/sd[a\-z]"\fP for IDE/(S)ATA and SCSI disks
! 119: "\\\\.\\PhysicalDrive[0\-25]" (where "a" maps to "0").
! 120: These disks can also be referred to as \fB"/dev/pd[0\-255]"\fP for
! 121: "\\\\.\\PhysicalDrive[0\-255]".
! 122: ATA disks can also be referred to as \fB"/dev/hd[a\-z]"\fP for
! 123: "\\\\.\\PhysicalDrive[0\-25]".
! 124: Use one the forms \fB"/dev/tape[0\-255]"\fP, \fB"/dev/st[0\-255]"\fP,
! 125: or \fB"/dev/nst[0\-255]"\fP for SCSI tape drives "\\\\.\\Tape[0\-255]".
! 126:
! 127: Alternatively, drive letters \fB"X:"\fP or \fB"X:\\"\fP may be used to
! 128: specify the (\'basic\') disk behind a mounted partition. This does
! 129: not work with \'dynamic\' disks.
! 130:
! 131: For disks behind 3ware 9000 controllers use \fB"/dev/sd[a\-z],N"\fP where
! 132: N specifies the disk number (3ware \'port\') behind the controller
! 133: providing the logical drive (\'unit\') specified by \fB"/dev/sd[a\-z]"\fP.
! 134: Alternatively, use \fB"/dev/tw_cli/cx/py"\fP for controller x, port y
! 135: to run the \'tw_cli\' tool and parse the output. This provides limited
! 136: monitoring (\'\-i\', \'\-c\', \'\-A\' below) if SMART support is missing
! 137: in the driver. Use \fB"/dev/tw_cli/stdin"\fP or \fB"/dev/tw_cli/clip"\fP
! 138: to parse CLI or 3DM output from standard input or clipboard.
! 139: The option \'\-d 3ware,N\' is not necessary on Windows.
! 140:
! 141: [NEW EXPERIMENTAL SMARTCTL FEATURE] For disks behind Intel Matrix RAID
! 142: driver use \fB"/dev/csmi[0\-9],N"\fP where N specifies the port behind
! 143: the logical scsi controller "\\\\.\\Scsi[0\-9]:".
! 144: The prefix \fB"/dev/"\fP is optional.
! 145: .\" %ENDIF OS Windows Cygwin
! 146: .\" %IF OS Cygwin
! 147: .IP \fBCYGWIN\fP: 9
! 148: See "WINDOWS NT4/2000/XP/2003/Vista/Win7/2008" above.
! 149: .\" %ENDIF OS Cygwin
! 150: .\" %IF OS OS2
! 151: .IP \fBOS/2,eComStation\fP: 9
! 152: Use the form \fB"/dev/hd[a\-z]"\fP for IDE/ATA devices.
! 153: .\" %ENDIF OS OS2
! 154: .PP
! 155: if \'\-\' is specified as the device path, \fBsmartctl\fP reads and
! 156: interprets it's own debug output from standard input.
! 157: See \'\-r ataioctl\' below for details.
! 158: .PP
! 159: Based on the device path, \fBsmartctl\fP will guess the device type
! 160: (ATA or SCSI). If necessary, the \'\-d\' option can be used to over\-ride
! 161: this guess
! 162:
! 163: Note that the printed output of \fBsmartctl\fP displays most numerical
! 164: values in base 10 (decimal), but some values are displayed in base 16
! 165: (hexadecimal). To distinguish them, the base 16 values are always
! 166: displayed with a leading \fB"0x"\fP, for example: "0xff". This man
! 167: page follows the same convention.
! 168:
! 169: .PP
! 170: .SH OPTIONS
! 171: .PP
! 172: The options are grouped below into several categories. \fBsmartctl\fP
! 173: will execute the corresponding commands in the order: INFORMATION,
! 174: ENABLE/DISABLE, DISPLAY DATA, RUN/ABORT TESTS.
! 175:
! 176: .TP
! 177: .B SHOW INFORMATION OPTIONS:
! 178: .TP
! 179: .B \-h, \-\-help, \-\-usage
! 180: Prints a usage message to STDOUT and exits.
! 181: .TP
! 182: .B \-V, \-\-version, \-\-copyright, \-\-license
! 183: Prints version, copyright, license, home page and SVN revision
! 184: information for your copy of \fBsmartctl\fP to STDOUT and then exits.
! 185: Please include this information if you are reporting bugs or problems.
! 186: .TP
! 187: .B \-i, \-\-info
! 188: Prints the device model number, serial number, firmware version, and
! 189: ATA Standard version/revision information. Says if the device
! 190: supports SMART, and if so, whether SMART support is currently enabled
! 191: or disabled. If the device supports Logical Block Address mode (LBA
! 192: mode) print current user drive capacity in bytes. (If drive is has a
! 193: user protected area reserved, or is "clipped", this may be smaller
! 194: than the potential maximum drive capacity.) Indicates if the drive is
! 195: in the smartmontools database (see \'\-v\' options below). If so, the
! 196: drive model family may also be printed. If \'\-n\' (see below) is
! 197: specified, the power mode of the drive is printed.
! 198: .TP
! 199: .B \-a, \-\-all
! 200: Prints all SMART information about the disk, or TapeAlert information
! 201: about the tape drive or changer. For ATA devices this is equivalent
! 202: to
! 203: .nf
! 204: \'\-H \-i \-c \-A \-l error \-l selftest \-l selective\'
! 205: .fi
! 206: and for SCSI, this is equivalent to
! 207: .nf
! 208: \'\-H \-i \-A \-l error \-l selftest\'.
! 209: .fi
! 210: Note that for ATA disks this does \fBnot\fP enable the non-SMART options
! 211: and the SMART options which require support for 48-bit ATA commands.
! 212: .TP
! 213: .B \-x, \-\-xall
! 214: Prints all SMART and non-SMART information about the device. For ATA
! 215: devices this is equivalent to
! 216: .nf
! 217: \'\-H \-i \-c \-A \-f brief \-l xerror,error \-l xselftest,selftest
! 218: \-l selective \-l directory \-l scttemp \-l scterc \-l sataphy\'.
! 219: .fi
! 220: and for SCSI, this is equivalent to
! 221: .nf
! 222: \'\-H \-i \-A \-l error \-l selftest \-l background \-l sasphy\'.
! 223: .fi
! 224: .TP
! 225: .B \-\-scan
! 226: Scans for devices and prints each device name, device type and protocol
! 227: ([ATA] or [SCSI]) info. May be used in conjunction with \'\-d TYPE\'
! 228: to restrict the scan to a specific TYPE. See also info about platform
! 229: specific device scan and the \fBDEVICESCAN\fP directive on
! 230: \fBsmartd\fP(8) man page.
! 231: .TP
! 232: .B \-\-scan\-open
! 233: Same as \-\-scan, but also tries to open each device before printing
! 234: device info. The device open may change the device type due
! 235: to autodetection (see also \'\-d test\').
! 236:
! 237: This option can be used to create a draft \fBsmartd.conf\fP file.
! 238: All options after \'\-\-\' are appended to each output line.
! 239: For example:
! 240: .nf
! 241: smartctl --scan-open -- -a -W 4,45,50 -m admin@work > smartd.conf
! 242: .fi
! 243:
! 244: .TP
! 245: .B RUN\-TIME BEHAVIOR OPTIONS:
! 246: .TP
! 247: .B \-q TYPE, \-\-quietmode=TYPE
! 248: Specifies that \fBsmartctl\fP should run in one of the two quiet modes
! 249: described here. The valid arguments to this option are:
! 250:
! 251: .I errorsonly
! 252: \- only print: For the \'\-l error\' option, if nonzero, the number
! 253: of errors recorded in the SMART error log and the power\-on time when
! 254: they occurred; For the \'\-l selftest\' option, errors recorded in the device
! 255: self\-test log; For the \'\-H\' option, SMART "disk failing" status or device
! 256: Attributes (pre\-failure or usage) which failed either now or in the
! 257: past; For the \'\-A\' option, device Attributes (pre\-failure or usage)
! 258: which failed either now or in the past.
! 259:
! 260: .I silent
! 261: \- print no output. The only way to learn about what was found is to
! 262: use the exit status of \fBsmartctl\fP (see RETURN VALUES below).
! 263:
! 264: .I noserial
! 265: \- Do not print the serial number of the device.
! 266: .TP
! 267: .B \-d TYPE, \-\-device=TYPE
! 268: Specifies the type of the device.
! 269: The valid arguments to this option are:
! 270:
! 271: .I auto
! 272: - attempt to guess the device type from the device name or from
! 273: controller type info provided by the operating system or from
! 274: a matching USB ID entry in the drive database.
! 275: This is the default.
! 276:
! 277: .I test
! 278: - prints the guessed type, then opens the device and prints the
! 279: (possibly changed) TYPE name and then exists without performing
! 280: any further commands.
! 281:
! 282: .I ata
! 283: \- the device type is ATA. This prevents
! 284: \fBsmartctl\fP
! 285: from issuing SCSI commands to an ATA device.
! 286:
! 287: .\" %IF NOT OS Darwin
! 288: .I scsi
! 289: \- the device type is SCSI. This prevents
! 290: \fBsmartctl\fP
! 291: from issuing ATA commands to a SCSI device.
! 292:
! 293: .I sat
! 294: \- the device type is SCSI to ATA Translation (SAT).
! 295: This is for ATA disks that have a SCSI to ATA Translation (SAT) Layer
! 296: (SATL) between the disk and the operating system.
! 297: SAT defines two ATA PASS THROUGH SCSI commands, one 12 bytes long and
! 298: the other 16 bytes long. The default is the 16 byte variant which can be
! 299: overridden with either \'\-d sat,12\' or \'\-d sat,16\'.
! 300:
! 301: .I usbcypress
! 302: \- this device type is for ATA disks that are behind a Cypress USB to PATA
! 303: bridge. This will use the ATACB proprietary scsi pass through command.
! 304: The default SCSI operation code is 0x24, but although it can be overridden
! 305: with \'\-d usbcypress,0xN\', where N is the scsi operation code,
! 306: you're running the risk of damage to the device or filesystems on it.
! 307:
! 308: .I usbjmicron
! 309: - this device type is for SATA disks that are behind a JMicron USB to
! 310: PATA/SATA bridge. The 48-bit ATA commands (required e.g. for \'\-l xerror\',
! 311: see below) do not work with all of these bridges and are therefore disabled by
! 312: default. These commands can be enabled by \'\-d usbjmicron,x\'.
! 313: If two disks are connected to a bridge with two ports, an error message is printed
! 314: if no PORT is specified.
! 315: The port can be specified by \'\-d usbjmicron[,x],PORT\' where PORT is 0
! 316: (master) or 1 (slave). This is not necessary if the device uses a port
! 317: multiplier to connect multiple disks to one port. The disks appear under
! 318: separate /dev/ice names then.
! 319: CAUTION: Specifying \',x\' for a device which does not support it results
! 320: in I/O errors and may disconnect the drive. The same applies if the specified
! 321: PORT does not exist or is not connected to a disk.
! 322:
! 323: .I usbsunplus
! 324: \- this device type is for SATA disks that are behind a SunplusIT USB to SATA
! 325: bridge.
! 326:
! 327: .\" %ENDIF NOT OS Darwin
! 328: .\" %IF OS Linux
! 329: .I marvell
! 330: \- [Linux only] interact with SATA disks behind Marvell chip-set
! 331: controllers (using the Marvell rather than libata driver).
! 332:
! 333: .I megaraid,N
! 334: \- [Linux only] the device consists of one or more SCSI/SAS disks connected
! 335: to a MegaRAID controller. The non-negative integer N (in the range of 0 to
! 336: 127 inclusive) denotes which disk on the controller is monitored.
! 337: Use syntax such as:
! 338: .nf
! 339: \fBsmartctl \-a \-d megaraid,2 /dev/sda\fP
! 340: .fi
! 341: .nf
! 342: \fBsmartctl \-a \-d megaraid,0 /dev/sdb\fP
! 343: .fi
! 344: This interface will also work for Dell PERC controllers.
! 345: The following /dev/XXX entry must exist:
! 346: .fi
! 347: For PERC2/3/4 controllers: \fB/dev/megadev0\fP
! 348: .fi
! 349: For PERC5/6 controllers: \fB/dev/megaraid_sas_ioctl_node\fP
! 350:
! 351: .\" %ENDIF OS Linux
! 352: .\" %IF OS FreeBSD Linux
! 353: .I 3ware,N
! 354: \- [FreeBSD and Linux only] the device consists of one or more ATA disks
! 355: connected to a 3ware RAID controller. The non-negative integer N
! 356: (in the range from 0 to 127 inclusive) denotes which disk on the controller
! 357: is monitored.
! 358: Use syntax such as:
! 359: .nf
! 360: \fBsmartctl \-a \-d 3ware,2 /dev/sda\fP
! 361: .fi
! 362: .nf
! 363: \fBsmartctl \-a \-d 3ware,0 /dev/twe0\fP
! 364: .fi
! 365: .nf
! 366: \fBsmartctl \-a \-d 3ware,1 /dev/twa0\fP
! 367: .fi
! 368: .nf
! 369: \fBsmartctl \-a \-d 3ware,1 /dev/twl0\fP
! 370: .fi
! 371: The first two forms, which refer to devices /dev/sda\-z and /dev/twe0\-15,
! 372: may be used with 3ware series 6000, 7000, and 8000 series controllers
! 373: that use the 3x\-xxxx driver.
! 374: \fBNote that the /dev/sda\-z form is deprecated\fP starting with
! 375: the Linux 2.6 kernel series and may not be supported by the Linux
! 376: kernel in the near future. The final form, which refers to devices
! 377: /dev/twa0\-15, must be used with 3ware 9000 series controllers, which
! 378: use the 3w\-9xxx driver.
! 379:
! 380: The devices /dev/twl0\-15 must be used with the 3ware/LSI 9750 series
! 381: controllers which use the 3w-sas driver.
! 382:
! 383: Note that if the special character device nodes /dev/twl?, /dev/twa?
! 384: and /dev/twe? do not exist, or exist with the incorrect major or minor
! 385: numbers, smartctl will recreate them on the fly. Typically /dev/twa0
! 386: refers to the first 9000\-series controller, /dev/twa1 refers to the
! 387: second 9000 series controller, and so on. The /dev/twl0 devices refers
! 388: to the first 9750 series controller, /dev/twl1 resfers to the second
! 389: 9750 series controller, and so on. Likewise /dev/twe0 refers to
! 390: the first 6/7/8000\-series controller, /dev/twe1 refers to the second
! 391: 6/7/8000 series controller, and so on.
! 392:
! 393: Note that for the 6/7/8000 controllers, \fBany\fP of the physical
! 394: disks can be queried or examined using \fBany\fP of the 3ware's SCSI
! 395: logical device /dev/sd? entries. Thus, if logical device /dev/sda is
! 396: made up of two physical disks (3ware ports zero and one) and logical
! 397: device /dev/sdb is made up of two other physical disks (3ware ports
! 398: two and three) then you can examine the SMART data on \fBany\fP of the
! 399: four physical disks using \fBeither\fP SCSI device /dev/sda \fBor\fP
! 400: /dev/sdb. If you need to know which logical SCSI device a particular
! 401: physical disk (3ware port) is associated with, use the dmesg or SYSLOG
! 402: output to show which SCSI ID corresponds to a particular 3ware unit,
! 403: and then use the 3ware CLI or 3dm tool to determine which ports
! 404: (physical disks) correspond to particular 3ware units.
! 405:
! 406: If the value of N corresponds to a port that does \fBnot\fP exist on
! 407: the 3ware controller, or to a port that does not physically have a
! 408: disk attached to it, the behavior of \fBsmartctl\fP depends upon the
! 409: specific controller model, firmware, Linux kernel and platform. In
! 410: some cases you will get a warning message that the device does not
! 411: exist. In other cases you will be presented with \'void\' data for a
! 412: non\-existent device.
! 413:
! 414: Note that if the /dev/sd? addressing form is used, then older 3w\-xxxx
! 415: drivers do not pass the "Enable Autosave"
! 416: (\'\fB\-S on\fP\') and "Enable Automatic Offline" (\'\fB\-o on\fP\')
! 417: commands to the disk, and produce these types of harmless syslog error
! 418: messages instead: "\fB3w\-xxxx: tw_ioctl(): Passthru size (123392) too
! 419: big\fP". This can be fixed by upgrading to version 1.02.00.037 or
! 420: later of the 3w\-xxxx driver, or by applying a patch to older
! 421: versions. Alternatively, use the character device /dev/twe0\-15 interface.
! 422:
! 423: The selective self\-test functions (\'\-t select,A\-B\') are only supported
! 424: using the character device interface /dev/twl0\-15, /dev/twa0\-15 and /dev/twe0\-15.
! 425: The necessary WRITE LOG commands can not be passed through the SCSI
! 426: interface.
! 427:
! 428: .\" %ENDIF OS FreeBSD Linux
! 429: .\" %IF OS Linux
! 430: .I areca,N
! 431: \- [Linux only] the device consists of one or more SATA disks connected to an
! 432: Areca SATA RAID controller. The positive integer N (in the range from 1 to
! 433: 24 inclusive) denotes which disk on the controller is monitored.
! 434: Use syntax such as:
! 435: .nf
! 436: \fBsmartctl \-a \-d areca,2 /dev/sg2\fP
! 437: .fi
! 438: .nf
! 439: \fBsmartctl \-a \-d areca,3 /dev/sg3\fP
! 440: .fi
! 441: The first line above addresses the second disk on the first Areca RAID controller.
! 442: The second line addresses the third disk on the second Areca RAID
! 443: controller. To help identify the correct device, use the command:
! 444: .nf
! 445: \fBcat /proc/scsi/sg/device_hdr /proc/scsi/sg/devices\fP
! 446: .fi
! 447: to show the SCSI generic devices (one per line, starting with
! 448: /dev/sg0). The correct SCSI generic devices to address for
! 449: smartmontools are the ones with the type field equal to 3. If the
! 450: incorrect device is addressed, please read the warning/error messages
! 451: carefully. They should provide hints about what devices to use.
! 452:
! 453: Important: the Areca controller must have firmware version 1.46 or
! 454: later. Lower-numbered firmware versions will give (harmless) SCSI
! 455: error messages and no SMART information.
! 456:
! 457: .\" %ENDIF OS Linux
! 458: .\" %IF OS FreeBSD Linux
! 459: .I cciss,N
! 460: \- [FreeBSD and Linux only] the device consists of one or more SCSI/SAS disks
! 461: connected to a cciss RAID controller. The non-negative integer N (in the range
! 462: from 0 to 15 inclusive) denotes which disk on the controller is monitored.
! 463:
! 464: If the controller firmware or driver provides a SAT Layer it may be possible
! 465: to monitor also SATA disks by specifiying \'\-d sat+cciss,N\'.
! 466:
! 467: .I hpt,L/M/N
! 468: \- [FreeBSD and Linux only] the device consists of one or more ATA disks
! 469: connected to a HighPoint RocketRAID controller. The integer L is the
! 470: controller id, the integer M is the channel number, and the integer N
! 471: is the PMPort number if it is available. The allowed values of L are
! 472: from 1 to 4 inclusive, M are from 1 to 16 inclusive and N from 1 to 4
! 473: if PMPort available. And also these values are limited by the model
! 474: of the HighPoint RocketRAID controller.
! 475: Use syntax such as:
! 476: .\" %ENDIF OS FreeBSD Linux
! 477: .\" %IF OS Linux
! 478: .nf
! 479: \fBsmartctl \-a \-d hpt,1/3 /dev/sda\fP (under Linux)
! 480: .fi
! 481: .nf
! 482: \fBsmartctl \-a \-d hpt,1/2/3 /dev/sda\fP (under Linux)
! 483: .fi
! 484: .\" %ENDIF OS Linux
! 485: .\" %IF OS FreeBSD
! 486: .nf
! 487: \fBsmartctl \-a \-d hpt,1/3 /dev/hptrr\fP (under FreeBSD)
! 488: .fi
! 489: .nf
! 490: \fBsmartctl \-a \-d hpt,1/2/3 /dev/hptrr\fP (under FreeBSD)
! 491: .fi
! 492: .\" %ENDIF OS FreeBSD
! 493: .\" %IF OS FreeBSD Linux
! 494: Note that the /dev/sda\-z form should be the device node which stands for
! 495: the disks derived from the HighPoint RocketRAID controllers under Linux and
! 496: under FreeBSD, it is the character device which the driver registered (eg,
! 497: /dev/hptrr, /dev/hptmv6).
! 498: .\" %ENDIF OS FreeBSD Linux
! 499: .TP
! 500: .B \-T TYPE, \-\-tolerance=TYPE
! 501: [ATA only] Specifies how tolerant \fBsmartctl\fP should be of ATA and SMART
! 502: command failures.
! 503:
! 504: The behavior of \fBsmartctl\fP depends upon whether the command is
! 505: "\fBoptional\fP" or "\fBmandatory\fP". Here "\fBmandatory\fP" means
! 506: "required by the ATA/ATAPI\-5 Specification if the device implements
! 507: the SMART command set" and "\fBoptional\fP" means "not required by the
! 508: ATA/ATAPI\-5 Specification even if the device implements the SMART
! 509: command set." The "\fBmandatory\fP" ATA and SMART commands are: (1)
! 510: ATA IDENTIFY DEVICE, (2) SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE, (3)
! 511: SMART ENABLE/DISABLE, and (4) SMART RETURN STATUS.
! 512:
! 513: The valid arguments to this option are:
! 514:
! 515: .I normal
! 516: \- exit on failure of any \fBmandatory\fP SMART command, and ignore
! 517: all failures of \fBoptional\fP SMART commands. This is the default.
! 518: Note that on some devices, issuing unimplemented optional SMART
! 519: commands doesn\'t cause an error. This can result in misleading
! 520: \fBsmartctl\fP messages such as "Feature X not implemented", followed
! 521: shortly by "Feature X: enabled". In most such cases, contrary to the
! 522: final message, Feature X is \fBnot\fP enabled.
! 523:
! 524: .I conservative
! 525: \- exit on failure of any \fBoptional\fP SMART command.
! 526:
! 527: .I permissive
! 528: \- ignore failure(s) of \fBmandatory\fP SMART commands. This option
! 529: may be given more than once. Each additional use of this option will
! 530: cause one more additional failure to be ignored. Note that the use of
! 531: this option can lead to messages like "Feature X not implemented",
! 532: followed shortly by "Error: unable to enable Feature X". In a few
! 533: such cases, contrary to the final message, Feature X \fBis\fP enabled.
! 534:
! 535: .I verypermissive
! 536: \- equivalent to giving a large number of \'\-T permissive\' options:
! 537: ignore failures of \fBany number\fP of \fBmandatory\fP SMART commands.
! 538: Please see the note above.
! 539: .TP
! 540: .B \-b TYPE, \-\-badsum=TYPE
! 541: [ATA only] Specifies the action \fBsmartctl\fP should take if a checksum
! 542: error is detected in the: (1) Device Identity Structure, (2) SMART
! 543: Self\-Test Log Structure, (3) SMART Attribute Value Structure, (4) SMART
! 544: Attribute Threshold Structure, or (5) ATA Error Log Structure.
! 545:
! 546: The valid arguments to this option are:
! 547:
! 548: .I warn
! 549: \- report the incorrect checksum but carry on in spite of it. This is the
! 550: default.
! 551:
! 552: .I exit
! 553: \- exit \fBsmartctl\fP.
! 554:
! 555: .I ignore
! 556: \- continue silently without issuing a warning.
! 557: .TP
! 558: .B \-r TYPE, \-\-report=TYPE
! 559: Intended primarily to help \fBsmartmontools\fP developers understand
! 560: the behavior of \fBsmartmontools\fP on non\-conforming or poorly
! 561: conforming hardware. This option reports details of \fBsmartctl\fP
! 562: transactions with the device. The option can be used multiple times.
! 563: When used just once, it shows a record of the ioctl() transactions
! 564: with the device. When used more than once, the detail of these
! 565: ioctl() transactions are reported in greater detail. The valid
! 566: arguments to this option are:
! 567:
! 568: .I ioctl
! 569: \- report all ioctl() transactions.
! 570:
! 571: .I ataioctl
! 572: \- report only ioctl() transactions with ATA devices.
! 573:
! 574: .I scsiioctl
! 575: \- report only ioctl() transactions with SCSI devices. Invoking this once
! 576: shows the SCSI commands in hex and the corresponding status. Invoking
! 577: it a second time adds a hex listing of the first 64 bytes of data send to,
! 578: or received from the device.
! 579:
! 580: Any argument may include a positive integer to specify the level of detail
! 581: that should be reported. The argument should be followed by a comma then
! 582: the integer with no spaces. For example,
! 583: .I ataioctl,2
! 584: The default
! 585: level is 1, so \'\-r ataioctl,1\' and \'\-r ataioctl\' are equivalent.
! 586:
! 587: For testing purposes, the output of \'\-r ataioctl,2\' can later be parsed
! 588: by \fBsmartctl\fP itself if \'\-\' is used as device path argument.
! 589: The ATA command input parameters, sector data and return values are
! 590: reconstructed from the debug report read from stdin.
! 591: Then \fBsmartctl\fP internally simulates an ATA device with the same
! 592: behaviour. This is does not work for SCSI devices yet.
! 593: .TP
! 594: .B \-n POWERMODE, \-\-nocheck=POWERMODE
! 595: [ATA only] Specifies if \fBsmartctl\fP should exit before performing any
! 596: checks when the device is in a low\-power mode. It may be used to prevent
! 597: a disk from being spun\-up by \fBsmartctl\fP. The power mode is ignored by
! 598: default. A nonzero exit status is returned if the device is in one of the
! 599: specified low\-power modes (see RETURN VALUES below).
! 600:
! 601: Note: If this option is used it may also be necessary to specify the device
! 602: type with the \'-d\' option. Otherwise the device may spin up due to
! 603: commands issued during device type autodetection.
! 604:
! 605: The valid arguments to this option are:
! 606:
! 607: .I never
! 608: \- check the device always, but print the power mode if \'\-i\' is
! 609: specified.
! 610:
! 611: .I sleep
! 612: \- check the device unless it is in SLEEP mode.
! 613:
! 614: .I standby
! 615: \- check the device unless it is in SLEEP or STANDBY mode. In
! 616: these modes most disks are not spinning, so if you want to prevent
! 617: a disk from spinning up, this is probably what you want.
! 618:
! 619: .I idle
! 620: \- check the device unless it is in SLEEP, STANDBY or IDLE mode.
! 621: In the IDLE state, most disks are still spinning, so this is probably
! 622: not what you want.
! 623:
! 624: .TP
! 625: .B SMART FEATURE ENABLE/DISABLE COMMANDS:
! 626: .IP
! 627: .B Note:
! 628: if multiple options are used to both enable and disable a
! 629: feature, then
! 630: .B both
! 631: the enable and disable commands will be issued. The enable command
! 632: will always be issued
! 633: .B before
! 634: the corresponding disable command.
! 635: .TP
! 636: .B \-s VALUE, \-\-smart=VALUE
! 637: Enables or disables SMART on device. The valid arguments to
! 638: this option are \fIon\fP and \fIoff\fP. Note that the command \'\-s on\'
! 639: (perhaps used with with the \'\-o on\' and \'\-S on\' options) should be
! 640: placed in a start\-up script for your machine, for example in rc.local or
! 641: rc.sysinit. In principle the SMART feature settings are preserved over
! 642: power\-cycling, but it doesn\'t hurt to be sure. It is not necessary (or
! 643: useful) to enable SMART to see the TapeAlert messages.
! 644: .TP
! 645: .B \-o VALUE, \-\-offlineauto=VALUE
! 646: [ATA only] Enables or disables SMART automatic offline test, which scans the
! 647: drive every four hours for disk defects. This command can be given during
! 648: normal system operation. The valid arguments to this option are \fIon\fP
! 649: and \fIoff\fP.
! 650:
! 651: Note that the SMART automatic offline test command is listed as
! 652: "Obsolete" in every version of the ATA and ATA/ATAPI Specifications.
! 653: It was originally part of the SFF\-8035i Revision 2.0 specification,
! 654: but was never part of any ATA specification. However it is
! 655: implemented and used by many vendors. [Good documentation can be found
! 656: in IBM\'s Official Published Disk Specifications. For example the IBM
! 657: Travelstar 40GNX Hard Disk Drive Specifications (Revision 1.1, 22
! 658: April 2002, Publication # 1541, Document S07N\-7715\-02) page 164. You
! 659: can also read the SFF\-8035i Specification \-\- see REFERENCES below.]
! 660: You can tell if automatic offline testing is supported by seeing if
! 661: this command enables and disables it, as indicated by the \'Auto
! 662: Offline Data Collection\' part of the SMART capabilities report
! 663: (displayed with \'\-c\').
! 664:
! 665: SMART provides \fBthree\fP basic categories of testing. The
! 666: \fBfirst\fP category, called "online" testing, has no effect on the
! 667: performance of the device. It is turned on by the \'\-s on\' option.
! 668:
! 669: The \fBsecond\fP category of testing is called "offline" testing. This
! 670: type of test can, in principle, degrade the device performance. The
! 671: \'\-o on\' option causes this offline testing to be carried out,
! 672: automatically, on a regular scheduled basis. Normally, the disk will
! 673: suspend offline testing while disk accesses are taking place, and then
! 674: automatically resume it when the disk would otherwise be idle, so in
! 675: practice it has little effect. Note that a one\-time offline test can
! 676: also be carried out immediately upon receipt of a user command. See
! 677: the \'\-t offline\' option below, which causes a one\-time offline test
! 678: to be carried out immediately.
! 679:
! 680: The choice (made by the SFF\-8035i and ATA specification authors) of
! 681: the word \fItesting\fP for these first two categories is unfortunate,
! 682: and often leads to confusion. In fact these first two categories of
! 683: online and offline testing could have been more accurately described
! 684: as online and offline \fBdata collection\fP.
! 685:
! 686: The results of this automatic or immediate offline testing (data
! 687: collection) are reflected in the values of the SMART Attributes.
! 688: Thus, if problems or errors are detected, the values of these
! 689: Attributes will go below their failure thresholds; some types of
! 690: errors may also appear in the SMART error log. These are visible with
! 691: the \'\-A\' and \'\-l error\' options respectively.
! 692:
! 693: Some SMART attribute values are updated only during off\-line data
! 694: collection activities; the rest are updated during normal operation of
! 695: the device or during both normal operation and off\-line testing. The
! 696: Attribute value table produced by the \'\-A\' option indicates this in
! 697: the UPDATED column. Attributes of the first type are labeled
! 698: "Offline" and Attributes of the second type are labeled "Always".
! 699:
! 700: The \fBthird\fP category of testing (and the \fIonly\fP category for
! 701: which the word \'testing\' is really an appropriate choice) is "self"
! 702: testing. This third type of test is only performed (immediately) when
! 703: a command to run it is issued. The \'\-t\' and \'\-X\' options can be
! 704: used to carry out and abort such self\-tests; please see below for
! 705: further details.
! 706:
! 707: Any errors detected in the self testing will be shown in the
! 708: SMART self\-test log, which can be examined using the \'\-l selftest\'
! 709: option.
! 710:
! 711: \fBNote:\fP in this manual page, the word \fB"Test"\fP is used in
! 712: connection with the second category just described, e.g. for the
! 713: "offline" testing. The words \fB"Self\-test"\fP are used in
! 714: connection with the third category.
! 715: .TP
! 716: .B \-S VALUE, \-\-saveauto=VALUE
! 717: [ATA] Enables or disables SMART autosave of device vendor\-specific
! 718: Attributes. The valid arguments to this option are \fIon\fP
! 719: and \fIoff\fP. Note that this feature is preserved across disk power
! 720: cycles, so you should only need to issue it once.
! 721:
! 722: The ATA standard does not specify a method to check whether SMART
! 723: autosave is enabled. Unlike SCSI (below), smartctl is unable to print
! 724: a warning if autosave is disabled.
! 725:
! 726: [SCSI] For SCSI devices this toggles the value of the Global Logging
! 727: Target Save Disabled (GLTSD) bit in the Control Mode Page. Some disk
! 728: manufacturers set this bit by default. This prevents error counters,
! 729: power\-up hours and other useful data from being placed in non\-volatile
! 730: storage, so these values may be reset to zero the next time the device
! 731: is power\-cycled. If the GLTSD bit is set then \'smartctl \-a\' will
! 732: issue a warning. Use \fIon\fP to clear the GLTSD bit and thus enable
! 733: saving counters to non\-volatile storage. For extreme streaming\-video
! 734: type applications you might consider using \fIoff\fP to set the GLTSD
! 735: bit.
! 736:
! 737: .TP
! 738: .B SMART READ AND DISPLAY DATA OPTIONS:
! 739: .TP
! 740: .B \-H, \-\-health
! 741: Check: Ask the device to report its SMART health status or pending
! 742: TapeAlert messages. SMART status is based on
! 743: information that it has gathered from online and offline
! 744: tests, which were used to determine/update its
! 745: SMART vendor\-specific Attribute values. TapeAlert status is obtained
! 746: by reading the TapeAlert log page.
! 747:
! 748: If the device reports failing health status, this means
! 749: .B either
! 750: that the device has already failed,
! 751: .B or
! 752: that it is predicting its own failure within the next 24 hours. If
! 753: this happens, use the \'\-a\' option to get more information, and
! 754: .B get your data off the disk and to someplace safe as soon as you can.
! 755: .TP
! 756: .B \-c, \-\-capabilities
! 757: [ATA only] Prints only the generic SMART capabilities. These
! 758: show what SMART features are implemented and how the device will
! 759: respond to some of the different SMART commands. For example it
! 760: shows if the device logs errors, if it supports offline surface
! 761: scanning, and so on. If the device can carry out self\-tests, this
! 762: option also shows the estimated time required to run those tests.
! 763:
! 764: Note that the time required to run the Self\-tests (listed in minutes)
! 765: are fixed. However the time required to run the Immediate Offline
! 766: Test (listed in seconds) is variable. This means that if you issue a
! 767: command to perform an Immediate Offline test with the \'\-t offline\' option,
! 768: then the time may jump to a larger value and then count down as the
! 769: Immediate Offline Test is carried out. Please see REFERENCES below
! 770: for further information about the the flags and capabilities described
! 771: by this option.
! 772: .TP
! 773: .B \-A, \-\-attributes
! 774: [ATA] Prints only the vendor specific SMART Attributes. The Attributes
! 775: are numbered from 1 to 253 and have specific names and ID numbers. For
! 776: example Attribute 12 is "power cycle count": how many times has the
! 777: disk been powered up.
! 778:
! 779: Each Attribute has a "Raw" value, printed under the heading
! 780: "RAW_VALUE", and a "Normalized" value printed under the heading
! 781: "VALUE". [Note: \fBsmartctl\fP prints these values in base\-10.] In
! 782: the example just given, the "Raw Value" for Attribute 12 would be the
! 783: actual number of times that the disk has been power\-cycled, for
! 784: example 365 if the disk has been turned on once per day for exactly
! 785: one year. Each vendor uses their own algorithm to convert this "Raw"
! 786: value to a "Normalized" value in the range from 1 to 254. Please keep
! 787: in mind that \fBsmartctl\fP only reports the different Attribute
! 788: types, values, and thresholds as read from the device. It does
! 789: \fBnot\fP carry out the conversion between "Raw" and "Normalized"
! 790: values: this is done by the disk\'s firmware.
! 791:
! 792: The conversion from Raw value to a quantity with physical units is
! 793: not specified by the SMART standard. In most cases, the values printed
! 794: by \fBsmartctl\fP are sensible. For example the temperature Attribute
! 795: generally has its raw value equal to the temperature in Celsius.
! 796: However in some cases vendors use unusual conventions. For example
! 797: the Hitachi disk on my laptop reports its power\-on hours in minutes,
! 798: not hours. Some IBM disks track three temperatures rather than one, in
! 799: their raw values. And so on.
! 800:
! 801: Each Attribute also has a Threshold value (whose range is 0 to 255)
! 802: which is printed under the heading "THRESH". If the Normalized value
! 803: is \fBless than or equal to\fP the Threshold value, then the Attribute
! 804: is said to have failed. If the Attribute is a pre\-failure Attribute,
! 805: then disk failure is imminent.
! 806:
! 807: Each Attribute also has a "Worst" value shown under the heading
! 808: "WORST". This is the smallest (closest to failure) value that the
! 809: disk has recorded at any time during its lifetime when SMART was
! 810: enabled. [Note however that some vendors firmware may actually
! 811: \fBincrease\fP the "Worst" value for some "rate\-type" Attributes.]
! 812:
! 813: The Attribute table printed out by \fBsmartctl\fP also shows the
! 814: "TYPE" of the Attribute. Attributes are one of two possible types:
! 815: Pre\-failure or Old age. Pre\-failure Attributes are ones which, if
! 816: less than or equal to their threshold values, indicate pending disk
! 817: failure. Old age, or usage Attributes, are ones which indicate
! 818: end\-of\-product life from old\-age or normal aging and wearout, if
! 819: the Attribute value is less than or equal to the threshold. \fBPlease
! 820: note\fP: the fact that an Attribute is of type 'Pre\-fail' does
! 821: \fBnot\fP mean that your disk is about to fail! It only has this
! 822: meaning if the Attribute\'s current Normalized value is less than or
! 823: equal to the threshold value.
! 824:
! 825: If the Attribute\'s current Normalized value is less than or equal to
! 826: the threshold value, then the "WHEN_FAILED" column will display
! 827: "FAILING_NOW". If not, but the worst recorded value is less than or
! 828: equal to the threshold value, then this column will display
! 829: "In_the_past". If the "WHEN_FAILED" column has no entry (indicated by
! 830: a dash: \'\-\') then this Attribute is OK now (not failing) and has
! 831: also never failed in the past.
! 832:
! 833: The table column labeled "UPDATED" shows if the SMART Attribute values
! 834: are updated during both normal operation and off\-line testing, or
! 835: only during offline testing. The former are labeled "Always" and the
! 836: latter are labeled "Offline".
! 837:
! 838: So to summarize: the Raw Attribute values are the ones that might have
! 839: a real physical interpretation, such as "Temperature Celsius",
! 840: "Hours", or "Start\-Stop Cycles". Each manufacturer converts these,
! 841: using their detailed knowledge of the disk\'s operations and failure
! 842: modes, to Normalized Attribute values in the range 1\-254. The
! 843: current and worst (lowest measured) of these Normalized Attribute
! 844: values are stored on the disk, along with a Threshold value that the
! 845: manufacturer has determined will indicate that the disk is going to
! 846: fail, or that it has exceeded its design age or aging limit.
! 847: \fBsmartctl\fP does \fBnot\fP calculate any of the Attribute values,
! 848: thresholds, or types, it merely reports them from the SMART data on
! 849: the device.
! 850:
! 851: Note that starting with ATA/ATAPI\-4, revision 4, the meaning of these
! 852: Attribute fields has been made entirely vendor\-specific. However most
! 853: ATA/ATAPI\-5 disks seem to respect their meaning, so we have retained
! 854: the option of printing the Attribute values.
! 855:
! 856: [SCSI] For SCSI devices the "attributes" are obtained from the temperature
! 857: and start\-stop cycle counter log pages. Certain vendor specific
! 858: attributes are listed if recognised. The attributes are output in a
! 859: relatively free format (compared with ATA disk attributes).
! 860: .TP
! 861: .B \-f FORMAT, \-\-format=FORMAT
! 862: [ATA only] Selects the output format of the attributes to one of:
! 863:
! 864: .I old
! 865: \- Old smartctl format. This is the default unless the \'\-x\' option is
! 866: specified.
! 867:
! 868: .I brief
! 869: \- New format which fits into 80 colums (except in some rare cases).
! 870: This format also decodes four additional attribute flags.
! 871: This is the default if the '\-x\' option is specified.
! 872: .TP
! 873: .B \-l TYPE, \-\-log=TYPE
! 874: Prints either the SMART Error Log, the SMART Self\-Test Log, the SMART
! 875: Selective Self\-Test Log [ATA only], the Log Directory [ATA only], or
! 876: the Background Scan Results Log [SCSI only].
! 877: The valid arguments to this option are:
! 878:
! 879: .I error
! 880: \- [ATA] prints the Summary SMART error log. SMART disks maintain a log
! 881: of the most recent five non\-trivial errors. For each of these errors, the
! 882: disk power\-on lifetime at which the error occurred is recorded, as is
! 883: the device status (idle, standby, etc) at the time of the error. For
! 884: some common types of errors, the Error Register (ER) and Status
! 885: Register (SR) values are decoded and printed as text. The meanings of these
! 886: are:
! 887: .nf
! 888: \fBABRT\fP: Command \fBAB\fPo\fBRT\fPed
! 889: \fBAMNF\fP: \fBA\fPddress \fBM\fPark \fBN\fPot \fBF\fPound
! 890: \fBCCTO\fP: \fBC\fPommand \fBC\fPompletion \fBT\fPimed \fBO\fPut
! 891: \fBEOM\fP: \fBE\fPnd \fBO\fPf \fBM\fPedia
! 892: \fBICRC\fP: \fBI\fPnterface \fBC\fPyclic \fBR\fPedundancy \fBC\fPode (CRC) error
! 893: \fBIDNF\fP: \fBID\fPentity \fBN\fPot \fBF\fPound
! 894: \fBILI\fP: (packet command\-set specific)
! 895: \fBMC\fP: \fBM\fPedia \fBC\fPhanged
! 896: \fBMCR\fP: \fBM\fPedia \fBC\fPhange \fBR\fPequest
! 897: \fBNM\fP: \fBN\fPo \fBM\fPedia
! 898: \fBobs\fP: \fBobs\fPolete
! 899: \fBTK0NF\fP: \fBT\fPrac\fBK 0 N\fPot \fBF\fPound
! 900: \fBUNC\fP: \fBUNC\fPorrectable Error in Data
! 901: \fBWP\fP: Media is \fBW\fPrite \fBP\fProtected
! 902: .fi
! 903: In addition, up to the last five commands that preceded the error are
! 904: listed, along with a timestamp measured from the start of the
! 905: corresponding power cycle. This is displayed in the form
! 906: Dd+HH:MM:SS.msec where D is the number of days, HH is hours, MM is
! 907: minutes, SS is seconds and msec is milliseconds. [Note: this time
! 908: stamp wraps after 2^32 milliseconds, or 49 days 17 hours 2 minutes and
! 909: 47.296 seconds.] The key ATA disk registers are also recorded in the
! 910: log. The final column of the error log is a text\-string description
! 911: of the ATA command defined by the Command Register (CR) and Feature
! 912: Register (FR) values. Commands that are obsolete in the most current
! 913: (ATA\-7) spec are listed like this: \fBREAD LONG (w/ retry) [OBS\-4]\fP,
! 914: indicating that the command became obsolete with or in the ATA\-4
! 915: specification. Similarly, the notation \fB[RET\-\fP\fIN\fP\fB]\fP is
! 916: used to indicate that a command was retired in the ATA\-\fIN\fP
! 917: specification. Some commands are not defined in any version of the
! 918: ATA specification but are in common use nonetheless; these are marked
! 919: \fB[NS]\fP, meaning non\-standard.
! 920:
! 921: The ATA Specification (ATA\-5 Revision 1c, Section 8.41.6.8.2) says:
! 922: \fB"Error log structures shall include UNC errors, IDNF errors for
! 923: which the address requested was valid, servo errors, write fault
! 924: errors, etc. Error log data structures shall not include errors
! 925: attributed to the receipt of faulty commands such as command codes not
! 926: implemented by the device or requests with invalid parameters or
! 927: invalid addresses."\fP The definitions of these terms are:
! 928: .br
! 929: \fBUNC\fP (\fBUNC\fPorrectable): data is uncorrectable. This refers
! 930: to data which has been read from the disk, but for which the Error
! 931: Checking and Correction (ECC) codes are inconsistent. In effect, this
! 932: means that the data can not be read.
! 933: .br
! 934: \fBIDNF\fP (\fBID N\fPot \fBF\fPound): user\-accessible address could
! 935: not be found. For READ LOG type commands, \fBIDNF\fP can also indicate
! 936: that a device data log structure checksum was incorrect.
! 937:
! 938: If the command that caused the error was a READ or WRITE command, then
! 939: the Logical Block Address (LBA) at which the error occurred will be
! 940: printed in base 10 and base 16. The LBA is a linear address, which
! 941: counts 512\-byte sectors on the disk, starting from zero. (Because of
! 942: the limitations of the SMART error log, if the LBA is greater than
! 943: 0xfffffff, then either no error log entry will be made, or the error
! 944: log entry will have an incorrect LBA. This may happen for drives with
! 945: a capacity greater than 128 GiB or 137 GB.) On Linux systems the
! 946: smartmontools web page has instructions about how to convert the LBA
! 947: address to the name of the disk file containing the erroneous disk
! 948: sector.
! 949:
! 950: Please note that some manufacturers \fBignore\fP the ATA
! 951: specifications, and make entries in the error log if the device
! 952: receives a command which is not implemented or is not valid.
! 953:
! 954: .I error
! 955: \- [SCSI] prints the error counter log pages for reads, write and verifies.
! 956: The verify row is only output if it has an element other than zero.
! 957:
! 958: .I xerror[,NUM][,error]
! 959: \- [ATA only] prints the Extended Comprehensive SMART error log
! 960: (General Purpose Log address 0x03). Unlike the Summary SMART error
! 961: log (see \'\-l error\' above), it provides sufficient space to log
! 962: the contents of the 48-bit LBA register set introduced with ATA-6.
! 963: It also supports logs with more than one sector. Each sector holds
! 964: up to 4 log entries. The actual number of log sectors is vendor
! 965: specific, typical values for HDD are 2 (Samsung), 5 (Seagate) or
! 966: 6 (WD). Some recent SSD devices have much larger error logs.
! 967:
! 968: Only the 8 most recent error log entries are printed by default.
! 969: This number can be changed by the optional parameter NUM.
! 970:
! 971: If ',error' is appended and the Extended Comprehensive SMART error
! 972: log is not supported, the Summary SMART self-test log is printed.
! 973:
! 974: Please note that some recent (e.g. Samsung) drives report errors only
! 975: in the Extended Comprehensive SMART error log. The Summary SMART error
! 976: log can be read but is always empty.
! 977:
! 978: .I selftest
! 979: \- [ATA] prints the SMART self\-test log. The disk maintains a self\-test
! 980: log showing the results of the self tests, which can be run using the
! 981: \'\-t\' option described below. For each of the most recent
! 982: twenty\-one self\-tests, the log shows the type of test (short or
! 983: extended, off\-line or captive) and the final status of the test. If
! 984: the test did not complete successfully, then the percentage of the
! 985: test remaining is shown. The time at which the test took place,
! 986: measured in hours of disk lifetime, is also printed. [Note: this time
! 987: stamp wraps after 2^16 hours, or 2730 days and 16 hours, or about 7.5
! 988: years.] If any errors were detected, the Logical Block Address (LBA)
! 989: of the first error is printed in decimal notation. On Linux systems the
! 990: smartmontools web page has instructions about how to convert this LBA
! 991: address to the name of the disk file containing the erroneous block.
! 992:
! 993: .I selftest
! 994: \- [SCSI] the self\-test log for a SCSI device has a slightly different
! 995: format than for an ATA device. For each of the most recent twenty
! 996: self\-tests, it shows the type of test and the status (final or in
! 997: progress) of the test. SCSI standards use the terms "foreground" and
! 998: "background" (rather than ATA\'s corresponding "captive" and
! 999: "off\-line") and "short" and "long" (rather than ATA\'s corresponding
! 1000: "short" and "extended") to describe the type of the test. The printed
! 1001: segment number is only relevant when a test fails in the third or
! 1002: later test segment. It identifies the test that failed and consists
! 1003: of either the number of the segment that failed during the test, or
! 1004: the number of the test that failed and the number of the segment in
! 1005: which the test was run, using a vendor\-specific method of putting both
! 1006: numbers into a single byte. The Logical Block Address (LBA) of the
! 1007: first error is printed in hexadecimal notation. On Linux systems the
! 1008: smartmontools web page has instructions about how to convert this LBA
! 1009: address to the name of the disk file containing the erroneous block.
! 1010: If provided, the SCSI Sense Key (SK), Additional Sense Code (ASC) and
! 1011: Additional Sense Code Qualifier (ASQ) are also printed. The self tests
! 1012: can be run using the \'\-t\' option described below (using the ATA
! 1013: test terminology).
! 1014:
! 1015: .I xselftest[,NUM][,selftest]
! 1016: \- [ATA only] prints the Extended SMART self\-test log (General Purpose
! 1017: Log address 0x07). Unlike the SMART self\-test log (see \'\-l selftest\'
! 1018: above), it supports 48-bit LBA and logs with more than one sector.
! 1019: Each sector holds up to 19 log entries. The actual number of log sectors
! 1020: is vendor specific, typical values are 1 (Seagate) or 2 (Samsung).
! 1021:
! 1022: Only the 25 most recent log entries are printed by default. This number
! 1023: can be changed by the optional parameter NUM.
! 1024:
! 1025: If ',selftest' is appended and the Extended SMART self-test log is not
! 1026: supported, the old SMART self-test log is printed.
! 1027:
! 1028: .I selective
! 1029: \- [ATA only] Please see the \'\-t select\' option below for a
! 1030: description of selective self\-tests. The selective self\-test log
! 1031: shows the start/end Logical Block Addresses (LBA) of each of the five
! 1032: test spans, and their current test status. If the span is being
! 1033: tested or the remainder of the disk is being read\-scanned, the
! 1034: current 65536\-sector block of LBAs being tested is also displayed.
! 1035: The selective self\-test log also shows if a read\-scan of the
! 1036: remainder of the disk will be carried out after the selective
! 1037: self\-test has completed (see \'\-t afterselect\' option) and the time
! 1038: delay before restarting this read\-scan if it is interrupted (see
! 1039: \'\-t pending\' option). This is a new smartmontools feature; please
! 1040: report unusual or incorrect behavior to the smartmontools\-support
! 1041: mailing list.
! 1042:
! 1043: .I directory[,gs]
! 1044: \- [ATA only] if the device supports the General Purpose Logging feature
! 1045: set (ATA\-6 and above) then this prints the Log Directory (the log at
! 1046: address 0). The Log Directory shows what logs are available and their
! 1047: length in sectors (512 bytes). The contents of the logs at address 1
! 1048: [Summary SMART error log] and at address 6 [SMART self\-test log] may
! 1049: be printed using the previously\-described
! 1050: .I error
! 1051: and
! 1052: .I selftest
! 1053: arguments to this option.
! 1054: If your version of smartctl supports 48-bit ATA commands, both the
! 1055: General Purpose Log (GPL) and SMART Log (SL) directories are printed in
! 1056: one combined table. The output can be restricted to the GPL directory or
! 1057: SL directory by \'\-l directory,q\' or \'\-l directory,s\' respectively.
! 1058:
! 1059: .I background
! 1060: \- [SCSI only] the background scan results log outputs information derived
! 1061: from Background Media Scans (BMS) done after power up and/or periodocally
! 1062: (e.g. every 24 hours) on recent SCSI disks. If supported, the BMS status
! 1063: is output first, indicating whether a background scan is currently
! 1064: underway (and if so a progress percentage), the amount of time the disk
! 1065: has been powered up and the number of scans already completed. Then there
! 1066: is a header and a line for each background scan "event". These will
! 1067: typically be either recovered or unrecoverable errors. That latter group
! 1068: may need some attention. There is a description of the background scan
! 1069: mechansim in section 4.18 of SBC\-3 revision 6 (see www.t10.org ).
! 1070:
! 1071: .I scttemp, scttempsts, scttemphist
! 1072: \- [ATA only] prints the disk temperature information provided by the
! 1073: SMART Command Transport (SCT) commands.
! 1074: The option \'scttempsts\' prints current temperature and temperature
! 1075: ranges returned by the SCT Status command, \'scttemphist\' prints
! 1076: temperature limits and the temperature history table returned by
! 1077: the SCT Data Table command, and \'scttemp\' prints both.
! 1078: The temperature values are preserved across power cycles.
! 1079: The logging interval can be configured with the
! 1080: \'\-l scttempint,N[,p]\' option, see below.
! 1081: The SCT commands were introduced in ATA\-8 ACS and were also
! 1082: supported by in many ATA\-7 disks.
! 1083:
! 1084: .I scttempint,N[,p]
! 1085: \- [ATA only] clears the SCT temperature history table and sets the
! 1086: time interval for temperature logging to N minutes.
! 1087: If \',p\' is specified, the setting is preserved across power cycles.
! 1088: Otherwise, the setting is volatile and will be reverted to the last
! 1089: non-volatile setting by the next hard reset. The default interval
! 1090: is vendor specific, typical values are 1, 2, or 5 minutes.
! 1091:
! 1092: .I scterc[,READTIME,WRITETIME]
! 1093: \- [ATA only] prints values and descriptions of the SCT Error Recovery
! 1094: Control settings. These are equivalent to TLER (as used by Western
! 1095: Digital), CCTL (as used by Samsung and Hitachi) and ERC (as used by
! 1096: Seagate). READTIME and WRITETIME arguments (deciseconds) set the
! 1097: specified values. Values of 0 disable the feature, other values less
! 1098: than 65 are probably not supported. For RAID configurations, this is
! 1099: typically set to 70,70 deciseconds.
! 1100:
! 1101: .I devstat[,PAGE]
! 1102: \- [ATA only] [NEW EXPERIMENTAL SMARTCTL FEATURE] prints values
! 1103: and descriptions of the ATA Device Statistics log pages
! 1104: (General Purpose Log address 0x04). If no PAGE number is specified,
! 1105: entries from all supported pages are printed. If PAGE 0 is specified,
! 1106: the list of supported pages is printed. Device Statistics was
! 1107: introduced in ATA\-8 ACS and is only supported by some recent devices
! 1108: (e.g. Intel 320 and 710 Series SSDs).
! 1109:
! 1110: .I sataphy[,reset]
! 1111: \- [SATA only] prints values and descriptions of the SATA Phy Event
! 1112: Counters (General Purpose Log address 0x11). If \'\-l sataphy,reset\'
! 1113: is specified, all counters are reset after reading the values.
! 1114:
! 1115: .I sasphy[,reset]
! 1116: \- [SAS (SCSI) only] prints values and descriptions of the SAS (SSP)
! 1117: Protocol Specific log page (log page 0x18). If \'\-l sasphy,reset\'
! 1118: is specified, all counters are reset after reading the values.
! 1119:
! 1120: .I gplog,ADDR[,FIRST[\-LAST|+SIZE]]
! 1121: \- [ATA only] prints a hex dump of any log accessible via General
! 1122: Purpose Logging (GPL) feature. The log address ADDR is the hex address
! 1123: listed in the log directory (see \'\-l directory\' above).
! 1124: The range of log sectors (pages) can be specified by decimal values
! 1125: FIRST\-LAST or FIRST+SIZE. FIRST defaults to 0, SIZE defaults to 1.
! 1126: LAST can be set to \'max\' to specify the last page of the log.
! 1127:
! 1128: .I smartlog,ADDR[,FIRST[\-LAST|+SIZE]]
! 1129: \- [ATA only] prints a hex dump of any log accessible via SMART Read
! 1130: Log command. See \'\-l gplog,...\' above for parameter syntax.
! 1131:
! 1132: For example, all these commands:
! 1133: .nf
! 1134: smartctl \-l gplog,0x80,10-15 /dev/sda
! 1135: smartctl \-l gplog,0x80,10+6 /dev/sda
! 1136: smartctl \-l smartlog,0x80,10-15 /dev/sda
! 1137: .fi
! 1138: print pages 10-15 of log 0x80 (first host vendor specific log).
! 1139:
! 1140: The hex dump format is compatible with the \'xxd \-r\' command.
! 1141: This command:
! 1142: .nf
! 1143: smartctl \-l gplog,0x11 /dev/sda | grep ^0 | xxd -r >log.bin
! 1144: .fi
! 1145: writes a binary representation of the one sector log 0x11
! 1146: (SATA Phy Event Counters) to file log.bin.
! 1147:
! 1148: .I ssd
! 1149: \- [ATA] prints the Solid State Device Statistics log page.
! 1150: This has the same effect as \'\-l devstat,7\', see above.
! 1151:
! 1152: .I ssd
! 1153: \- [SCSI] prints the Solid State Media percentage used endurance
! 1154: indicator. A value of 0 indicates as new condition while 100
! 1155: indicates the device is at the end of its lifetime as projected by the
! 1156: manufacturer. The value may reach 255.
! 1157: .TP
! 1158: .B \-v ID,FORMAT[:BYTEORDER][,NAME], \-\-vendorattribute=ID,FORMAT[:BYTEORDER][,NAME]
! 1159: [ATA only] Sets a vendor\-specific raw value print FORMAT, an optional
! 1160: BYTEORDER and an optional NAME for Attribute ID.
! 1161: This option may be used multiple times.
! 1162:
! 1163: The Attribute ID can be in the range 1 to 255. If \'N\' is specified as
! 1164: ID, the settings for all Attributes are changed.
! 1165:
! 1166: The optional BYTEORDER consists of 1 to 8 characters from the
! 1167: set \'012345rvwz\'. The characters \'0\' to \'5\' select the byte 0
! 1168: to 5 from the 48\-bit raw value, \'r\' selects the reserved byte of
! 1169: the attribute data block, \'v\' selects the normalized value, \'w\'
! 1170: selects the worst value and \'z\' inserts a zero byte.
! 1171: The default BYTEORDER is \'543210\' for all 48\-bit formats, \'r543210\'
! 1172: for the 54\-bit formats, and \'543210wv\' for the 64\-bit formats.
! 1173: For example, \'\-v 5,raw48:012345\' prints the raw value of
! 1174: attribute 5 with big endian instead of little endian
! 1175: byte ordering.
! 1176:
! 1177: The NAME is a string of letters, digits and underscore. Its length should
! 1178: not exceed 23 characters. The \'\-P showall\' option reports an error if
! 1179: this is the case.
! 1180:
! 1181: .I \-v help
! 1182: \- Prints (to STDOUT) a list of all valid arguments to this option,
! 1183: then exits.
! 1184:
! 1185: Valid arguments for FORMAT are:
! 1186:
! 1187: .I raw8
! 1188: \- Print the Raw value as six 8\-bit unsigned base\-10 integers.
! 1189: This may be useful for decoding the meaning of the Raw value.
! 1190:
! 1191: .I raw16
! 1192: \- Print the Raw value as three 16\-bit unsigned base\-10 integers.
! 1193: This may be useful for decoding the meaning of the Raw value.
! 1194:
! 1195: .I raw48
! 1196: \- Print the Raw value as a 48\-bit unsigned base\-10 integer.
! 1197: This is the default for most attributes.
! 1198:
! 1199: .I hex48
! 1200: \- Print the Raw value as a 12 digit hexadecimal number.
! 1201: This may be useful for decoding the meaning of the Raw value.
! 1202:
! 1203: .I raw64
! 1204: \- Print the Raw value as a 64\-bit unsigned base\-10 integer.
! 1205: This includes two bytes from the normalized and worst attribute value.
! 1206: This new raw format is used by some recent SSD devices.
! 1207:
! 1208: .I hex64
! 1209: \- Print the Raw value as a 16 digit hexadecimal number.
! 1210: This includes two bytes from the normalized and worst attribute value.
! 1211: This new raw format is used by some recent SSD devices.
! 1212:
! 1213: .I min2hour
! 1214: \- Raw Attribute is power\-on time in minutes. Its raw value
! 1215: will be displayed in the form "Xh+Ym". Here X is hours, and Y is
! 1216: minutes in the range 0\-59 inclusive. Y is always printed with two
! 1217: digits, for example "06" or "31" or "00".
! 1218:
! 1219: .I sec2hour
! 1220: \- Raw Attribute is power\-on time in seconds. Its raw value
! 1221: will be displayed in the form "Xh+Ym+Zs". Here X is hours, Y is
! 1222: minutes in the range 0\-59 inclusive, and Z is seconds in the range
! 1223: 0\-59 inclusive. Y and Z are always printed with two digits, for
! 1224: example "06" or "31" or "00".
! 1225:
! 1226: .I halfmin2hour
! 1227: \- Raw Attribute is power\-on time, measured in units of 30
! 1228: seconds. This format is used by some Samsung disks. Its raw value
! 1229: will be displayed in the form "Xh+Ym". Here X is hours, and Y is
! 1230: minutes in the range 0\-59 inclusive. Y is always printed with two
! 1231: digits, for example "06" or "31" or "00".
! 1232:
! 1233: .I msec24hour32
! 1234: \- Raw Attribute is power\-on time measured in 32\-bit hours and 24\-bit
! 1235: milliseconds since last hour update. It will be displayed in the form
! 1236: "Xh+Ym+Z.Ms". Here X is hours, Y is minutes, Z is seconds and M is
! 1237: milliseconds.
! 1238:
! 1239: .I tempminmax
! 1240: \- Raw Attribute is the disk temperature in Celsius. Info about
! 1241: Min/Max temperature is printed if available. This is the default
! 1242: for Attributes 190 and 194. The recording interval (lifetime,
! 1243: last power cycle, last soft reset) of the min/max values is device
! 1244: specific.
! 1245:
! 1246: .I temp10x
! 1247: \- Raw Attribute is ten times the disk temperature in Celsius.
! 1248:
! 1249: .I raw16(raw16)
! 1250: \- Print the raw attribute as a 16\-bit value and two optional
! 1251: 16\-bit values if these words are nonzero. This is the default
! 1252: for Attributes 5 and 196.
! 1253:
! 1254: .I raw16(avg16)
! 1255: \- Raw attribute is spin-up time. It is printed as a 16-bit value
! 1256: and an optional "Average" 16-bit value if the word is nonzero.
! 1257: This is the default for Attribute 3.
! 1258:
! 1259: .I raw24/raw24
! 1260: \- Raw Attribute contains two 24\-bit values. The first is the
! 1261: number of load cycles. The second is the number of unload cycles.
! 1262: The difference between these two values is the number of times that
! 1263: the drive was unexpectedly powered off (also called an emergency
! 1264: unload). As a rule of thumb, the mechanical stress created by one
! 1265: emergency unload is equivalent to that created by one hundred normal
! 1266: unloads.
! 1267:
! 1268: .I raw24/raw32
! 1269: \- Raw attribute is an error rate which consists of a 24\-bit error
! 1270: count and a 32\-bit total count.
! 1271:
! 1272: The following old arguments to \'\-v\' are also still valid:
! 1273:
! 1274: .I 9,minutes
! 1275: \- same as:
! 1276: .I 9,min2hour,Power_On_Minutes.
! 1277:
! 1278: .I 9,seconds
! 1279: \- same as:
! 1280: .I 9,sec2hour,Power_On_Seconds.
! 1281:
! 1282: .I 9,halfminutes
! 1283: \- same as:
! 1284: .I 9,halfmin2hour,Power_On_Half_Minutes.
! 1285:
! 1286: .I 9,temp
! 1287: \- same as:
! 1288: .I 9,tempminmax,Temperature_Celsius.
! 1289:
! 1290: .I 192,emergencyretractcyclect
! 1291: \- same as:
! 1292: .I 192,raw48,Emerg_Retract_Cycle_Ct
! 1293:
! 1294: .I 193,loadunload
! 1295: \- same as:
! 1296: .I 193,raw24/raw24.
! 1297:
! 1298: .I 194,10xCelsius
! 1299: \- same as:
! 1300: .I 194,temp10x,Temperature_Celsius_x10.
! 1301:
! 1302: .I 194,unknown
! 1303: \- same as:
! 1304: .I 194,raw48,Unknown_Attribute.
! 1305:
! 1306: .I 197,increasing
! 1307: \- same as:
! 1308: .I 197,raw48,Total_Pending_Sectors.
! 1309: Also means that Attribute number 197 (Current Pending Sector Count)
! 1310: is not reset if uncorrectable sectors are reallocated
! 1311: (see \fBsmartd.conf\fP(5) man page).
! 1312:
! 1313: .I 198,increasing
! 1314: \- same as:
! 1315: .I 198,raw48,Total_Offl_Uncorrectabl.
! 1316: Also means that Attribute number 198 (Offline Uncorrectable Sector Count)
! 1317: is not reset if uncorrectable sectors are reallocated
! 1318: (see \fBsmartd.conf\fP(5) man page).
! 1319:
! 1320: .I 198,offlinescanuncsectorct
! 1321: \- same as:
! 1322: .I 198,raw48,Offline_Scan_UNC_SectCt.
! 1323:
! 1324: .I 200,writeerrorcount
! 1325: \- same as:
! 1326: .I 200,raw48,Write_Error_Count.
! 1327:
! 1328: .I 201,detectedtacount
! 1329: \- same as:
! 1330: .I 201,raw48,Detected_TA_Count.
! 1331:
! 1332: .I 220,temp
! 1333: \- same as:
! 1334: .I 220,raw48,Temperature_Celsius.
! 1335:
! 1336: Note: a table of hard drive models, listing which Attribute
! 1337: corresponds to temperature, can be found at:
! 1338: \fBhttp://www.guzu.net/linux/hddtemp.db\fP
! 1339: .TP
! 1340: .B \-F TYPE, \-\-firmwarebug=TYPE
! 1341: [ATA only] Modifies the behavior of \fBsmartctl\fP to compensate for some
! 1342: known and understood device firmware or driver bug. Except \'swapid\',
! 1343: the arguments to this option are exclusive, so that only the final
! 1344: option given is used. The valid values are:
! 1345:
! 1346: .I none
! 1347: \- Assume that the device firmware obeys the ATA specifications. This
! 1348: is the default, unless the device has presets for \'\-F\' in the
! 1349: device database (see note below).
! 1350:
! 1351: .I samsung
! 1352: \- In some Samsung disks (example: model SV4012H Firmware Version:
! 1353: RM100\-08) some of the two\- and four\-byte quantities in the SMART data
! 1354: structures are byte\-swapped (relative to the ATA specification).
! 1355: Enabling this option tells \fBsmartctl\fP to evaluate these quantities
! 1356: in byte\-reversed order. Some signs that your disk needs this option
! 1357: are (1) no self\-test log printed, even though you have run self\-tests;
! 1358: (2) very large numbers of ATA errors reported in the ATA error log;
! 1359: (3) strange and impossible values for the ATA error log timestamps.
! 1360:
! 1361: .I samsung2
! 1362: \- In some Samsung disks the number of ATA errors reported is byte swapped.
! 1363: Enabling this option tells \fBsmartctl\fP to evaluate this quantity in
! 1364: byte\-reversed order. An indication that your Samsung disk needs this
! 1365: option is that the self\-test log is printed correctly, but there are a
! 1366: very large number of errors in the SMART error log. This is because
! 1367: the error count is byte swapped. Thus a disk with five errors
! 1368: (0x0005) will appear to have 20480 errors (0x5000).
! 1369:
! 1370: .I samsung3
! 1371: \- Some Samsung disks (at least SP2514N with Firmware VF100\-37) report
! 1372: a self\-test still in progress with 0% remaining when the test was already
! 1373: completed. Enabling this option modifies the output of the self\-test
! 1374: execution status (see options \'\-c\' or \'\-a\' above) accordingly.
! 1375:
! 1376: Note that an explicit \'\-F\' option on the command line will
! 1377: over\-ride any preset values for \'\-F\' (see the \'\-P\' option
! 1378: below).
! 1379:
! 1380: .I swapid
! 1381: \- Fixes byte swapped ATA identify strings (device name, serial number,
! 1382: firmware version) returned by some buggy device drivers.
! 1383: .TP
! 1384: .B \-P TYPE, \-\-presets=TYPE
! 1385: [ATA only] Specifies whether \fBsmartctl\fP should use any preset options
! 1386: that are available for this drive. By default, if the drive is recognized
! 1387: in the \fBsmartmontools\fP database, then the presets are used.
! 1388:
! 1389: \fBsmartctl\fP can automatically set appropriate options for known
! 1390: drives. For example, the Maxtor 4D080H4 uses Attribute 9 to stores
! 1391: power\-on time in minutes whereas most drives use that Attribute to
! 1392: store the power\-on time in hours. The command\-line option \'\-v
! 1393: 9,minutes\' ensures that \fBsmartctl\fP correctly interprets Attribute
! 1394: 9 in this case, but that option is preset for the Maxtor 4D080H4 and
! 1395: so need not be specified by the user on the \fBsmartctl\fP command
! 1396: line.
! 1397:
! 1398: The argument
! 1399: .I show
! 1400: will show any preset options for your drive and the argument
! 1401: .I showall
! 1402: will show all known drives in the \fBsmartmontools\fP database, along
! 1403: with their preset options. If there are no presets for your drive and
! 1404: you think there should be (for example, a \-v or \-F option is needed
! 1405: to get \fBsmartctl\fP to display correct values) then please contact
! 1406: the \fBsmartmontools\fP developers so that this information can be
! 1407: added to the \fBsmartmontools\fP database. Contact information is at the
! 1408: end of this man page.
! 1409:
! 1410: The valid arguments to this option are:
! 1411:
! 1412: .I use
! 1413: \- if a drive is recognized, then use the stored presets for it. This
! 1414: is the default. Note that presets will NOT over\-ride additional
! 1415: Attribute interpretation (\'\-v N,something\') command\-line options or
! 1416: explicit \'\-F\' command\-line options..
! 1417:
! 1418: .I ignore
! 1419: \- do not use presets.
! 1420:
! 1421: .I show
! 1422: \- show if the drive is recognized in the database, and if so, its
! 1423: presets, then exit.
! 1424:
! 1425: .I showall
! 1426: \- list all recognized drives, and the presets that are set for them,
! 1427: then exit. This also checks the drive database regular expressions
! 1428: and settings for syntax errors.
! 1429:
! 1430: The \'\-P showall\' option takes up to two optional arguments to
! 1431: match a specific drive type and firmware version. The command:
! 1432: .nf
! 1433: smartctl \-P showall
! 1434: .fi
! 1435: lists all entries, the command:
! 1436: .nf
! 1437: smartctl \-P showall \'MODEL\'
! 1438: .fi
! 1439: lists all entries matching MODEL, and the command:
! 1440: .nf
! 1441: smartctl \-P showall \'MODEL\' \'FIRMWARE\'
! 1442: .fi
! 1443: lists all entries for this MODEL and a specific FIRMWARE version.
! 1444: .TP
! 1445: .B \-B [+]FILE, \-\-drivedb=[+]FILE
! 1446: [ATA only] Read the drive database from FILE. The new database replaces
! 1447: the built in database by default. If \'+\' is specified, then the new
! 1448: entries prepend the built in entries.
! 1449:
! 1450: Optional entries are read from the file
! 1451: .\" %IF NOT OS Windows
! 1452: \fB/usr/local/etc/smart_drivedb.h\fP
! 1453: .\" %ENDIF NOT OS Windows
! 1454: .\" %IF OS ALL
! 1455: (Windows: \fBEXEDIR/drivedb-add.h\fP)
! 1456: .\" %ENDIF OS ALL
! 1457: .\" %IF OS Windows
! 1458: .\"! \fBEXEDIR/drivedb-add.h\fP.
! 1459: .\" %ENDIF OS Windows
! 1460: .\" %IF ENABLE_DRIVEDB
! 1461: if this option is not specified.
! 1462:
! 1463: If
! 1464: .\" %IF NOT OS Windows
! 1465: \fB/usr/local/share/smartmontools/drivedb.h\fP
! 1466: .\" %ENDIF NOT OS Windows
! 1467: .\" %IF OS ALL
! 1468: (Windows: \fBEXEDIR/drivedb.h\fP)
! 1469: .\" %ENDIF OS ALL
! 1470: .\" %IF OS Windows
! 1471: .\"! \fBEXEDIR/drivedb.h\fP
! 1472: .\" %ENDIF OS Windows
! 1473: is present, the contents of this file is used instead of the built in table.
! 1474:
! 1475: Run
! 1476: .\" %IF NOT OS Windows
! 1477: \fB/usr/local/sbin/update-smart-drivedb\fP
! 1478: .\" %ENDIF NOT OS Windows
! 1479: .\" %IF OS ALL
! 1480: (Windows: \fBEXEDIR/update-smart-drivedb.exe\fP)
! 1481: .\" %ENDIF OS ALL
! 1482: .\" %IF OS Windows
! 1483: .\"! \fBEXEDIR/update-smart-drivedb.exe\fP
! 1484: .\" %ENDIF OS Windows
! 1485: to update this file from the smartmontools SVN repository.
! 1486: .\" %ENDIF ENABLE_DRIVEDB
! 1487:
! 1488: The database files use the same C/C++ syntax that is used to initialize
! 1489: the built in database array. C/C++ style comments are allowed.
! 1490: Example:
! 1491:
! 1492: .nf
! 1493: /* Full entry: */
! 1494: {
! 1495: "Model family", // Info about model family/series.
! 1496: "MODEL1.*REGEX", // Regular expression to match model of device.
! 1497: "VERSION.*REGEX", // Regular expression to match firmware version(s).
! 1498: "Some warning", // Warning message.
! 1499: "\-v 9,minutes" // String of preset \-v and \-F options.
! 1500: },
! 1501: /* Minimal entry: */
! 1502: {
! 1503: "", // No model family/series info.
! 1504: "MODEL2.*REGEX", // Regular expression to match model of device.
! 1505: "", // All firmware versions.
! 1506: "", // No warning.
! 1507: "" // No options preset.
! 1508: },
! 1509: /* USB ID entry: */
! 1510: {
! 1511: "USB: Device; Bridge", // Info about USB device and bridge name.
! 1512: "0x1234:0xabcd", // Regular expression to match vendor:product ID.
! 1513: "0x0101", // Regular expression to match bcdDevice.
! 1514: "", // Not used.
! 1515: "\-d sat" // String with device type option.
! 1516: },
! 1517: /* ... */
! 1518: .fi
! 1519:
! 1520: .TP
! 1521: .B SMART RUN/ABORT OFFLINE TEST AND SELF\-TEST OPTIONS:
! 1522: .TP
! 1523: .B \-t TEST, \-\-test=TEST
! 1524: Executes TEST immediately. The \'\-C\' option can be used in
! 1525: conjunction with this option to run the short or long (and also for
! 1526: ATA devices, selective or conveyance) self\-tests in captive mode
! 1527: (known as "foreground mode" for SCSI devices). Note that only one
! 1528: test type can be run at a time, so only one test type should be
! 1529: specified per command line. Note also that if a computer is shutdown
! 1530: or power cycled during a self\-test, no harm should result. The
! 1531: self\-test will either be aborted or will resume automatically.
! 1532:
! 1533: The valid arguments to this option are:
! 1534:
! 1535: .I offline
! 1536: \- [ATA] runs SMART Immediate Offline Test. This immediately
! 1537: starts the test described above. This command can be given during
! 1538: normal system operation. The effects of this test are visible only in
! 1539: that it updates the SMART Attribute values, and if errors are
! 1540: found they will appear in the SMART error log, visible with the \'\-l error\'
! 1541: option.
! 1542:
! 1543: If the \'\-c\' option to \fBsmartctl\fP shows that the device has the
! 1544: "Suspend Offline collection upon new command" capability then you can
! 1545: track the progress of the Immediate Offline test using the \'\-c\'
! 1546: option to \fBsmartctl\fP. If the \'\-c\' option show that the device
! 1547: has the "Abort Offline collection upon new command" capability then
! 1548: most commands will abort the Immediate Offline Test, so you should not
! 1549: try to track the progress of the test with \'\-c\', as it will abort
! 1550: the test.
! 1551:
! 1552: .I offline
! 1553: \- [SCSI] runs the default self test in foreground. No entry is placed
! 1554: in the self test log.
! 1555:
! 1556: .I short
! 1557: \- [ATA] runs SMART Short Self Test (usually under ten minutes).
! 1558: This command can be given during normal system operation (unless run in
! 1559: captive mode \- see the \'\-C\' option below). This is a
! 1560: test in a different category than the immediate or automatic offline
! 1561: tests. The "Self" tests check the electrical and mechanical
! 1562: performance as well as the read performance of the disk. Their
! 1563: results are reported in the Self Test Error Log, readable with
! 1564: the \'\-l selftest\' option. Note that on some disks the progress of the
! 1565: self\-test can be monitored by watching this log during the self\-test; with other disks
! 1566: use the \'\-c\' option to monitor progress.
! 1567:
! 1568: .I short
! 1569: \- [SCSI] runs the "Background short" self\-test.
! 1570:
! 1571: .I long
! 1572: \- [ATA] runs SMART Extended Self Test (tens of minutes). This is a
! 1573: longer and more thorough version of the Short Self Test described
! 1574: above. Note that this command can be given during normal
! 1575: system operation (unless run in captive mode \- see the \'\-C\' option below).
! 1576:
! 1577: .I long
! 1578: \- [SCSI] runs the "Background long" self\-test.
! 1579:
! 1580: .I conveyance
! 1581: \- [ATA only] runs a SMART Conveyance Self Test (minutes). This
! 1582: self\-test routine is intended to identify damage incurred during
! 1583: transporting of the device. This self\-test routine should take on the
! 1584: order of minutes to complete. Note that this command can be given
! 1585: during normal system operation (unless run in captive mode \- see the
! 1586: \'\-C\' option below).
! 1587:
! 1588: .I select,N\-M, select,N+SIZE
! 1589: \- [ATA only] runs a SMART Selective Self Test, to test a \fBrange\fP
! 1590: of disk Logical Block Addresses (LBAs), rather than the entire disk.
! 1591: Each range of LBAs that is checked is called a "span" and is specified
! 1592: by a starting LBA (N) and an ending LBA (M) with N less than or equal
! 1593: to M. The range can also be specified as N+SIZE. A span at the end of
! 1594: a disk can be specified by N\-\fBmax\fP.
! 1595:
! 1596: For example the commands:
! 1597: .nf
! 1598: smartctl \-t select,10\-20 /dev/hda
! 1599: smartctl \-t select,10+11 /dev/hda
! 1600: .fi
! 1601: both runs a self test on one span consisting of LBAs ten to twenty
! 1602: (inclusive). The command:
! 1603: .nf
! 1604: smartctl \-t select,100000000\-max /dev/hda
! 1605: .fi
! 1606: run a self test from LBA 100000000 up to the end of the disk.
! 1607: The \'\-t\' option can be given up to five times, to test
! 1608: up to five spans. For example the command:
! 1609: .nf
! 1610: smartctl \-t select,0\-100 \-t select,1000\-2000 /dev/hda
! 1611: .fi
! 1612: runs a self test on two spans. The first span consists of 101 LBAs
! 1613: and the second span consists of 1001 LBAs. Note that the spans can
! 1614: overlap partially or completely, for example:
! 1615: .nf
! 1616: smartctl \-t select,0\-10 \-t select,5\-15 \-t select,10\-20 /dev/hda
! 1617: .fi
! 1618: The results of the selective self\-test can be obtained (both during
! 1619: and after the test) by printing the SMART self\-test log, using the
! 1620: \'\-l selftest\' option to smartctl.
! 1621:
! 1622: Selective self tests are particularly useful as disk capacities
! 1623: increase: an extended self test (smartctl \-t long) can take several
! 1624: hours. Selective self\-tests are helpful if (based on SYSLOG error
! 1625: messages, previous failed self\-tests, or SMART error log entries) you
! 1626: suspect that a disk is having problems at a particular range of
! 1627: Logical Block Addresses (LBAs).
! 1628:
! 1629: Selective self\-tests can be run during normal system operation (unless
! 1630: done in captive mode \- see the \'\-C\' option below).
! 1631:
! 1632: The following variants of the selective self\-test command use spans based
! 1633: on the ranges from past tests already stored on the disk:
! 1634:
! 1635: .I select,redo[+SIZE]
! 1636: \- [ATA only] redo the last SMART Selective Self Test using the same LBA
! 1637: range. The starting LBA is identical to the LBA used by last test, same
! 1638: for ending LBA unless a new span size is specified by optional +SIZE
! 1639: argument.
! 1640:
! 1641: For example the commands:
! 1642: .nf
! 1643: smartctl \-t select,10\-20 /dev/hda
! 1644: smartctl \-t select,redo /dev/hda
! 1645: smartctl \-t select,redo+20 /dev/hda
! 1646: .fi
! 1647: have the same effect as:
! 1648: .nf
! 1649: smartctl \-t select,10\-20 /dev/hda
! 1650: smartctl \-t select,10\-20 /dev/hda
! 1651: smartctl \-t select,10\-29 /dev/hda
! 1652: .fi
! 1653:
! 1654: .I select,next[+SIZE]
! 1655: \- [ATA only] runs a SMART Selective Self Test on the LBA range which
! 1656: follows the range of the last test. The starting LBA is set to (ending
! 1657: LBA +1) of the last test. A new span size may be specified by the
! 1658: optional +SIZE argument.
! 1659:
! 1660: For example the commands:
! 1661: .nf
! 1662: smartctl \-t select,0\-999 /dev/hda
! 1663: smartctl \-t select,next /dev/hda
! 1664: smartctl \-t select,next+2000 /dev/hda
! 1665: .fi
! 1666: have the same effect as:
! 1667: .nf
! 1668: smartctl \-t select,0\-999 /dev/hda
! 1669: smartctl \-t select,1000\-1999 /dev/hda
! 1670: smartctl \-t select,2000\-3999 /dev/hda
! 1671: .fi
! 1672:
! 1673: If the last test ended at the last LBA of the disk, the new range starts
! 1674: at LBA 0. The span size of the last span of a disk is adjusted such that
! 1675: the total number of spans to check the full disk will not be changed
! 1676: by future uses of \'\-t select,next\'.
! 1677:
! 1678: .I select,cont[+SIZE]
! 1679: \- [ATA only] performs a \'redo\' (above) if the self test status reports
! 1680: that the last test was aborted by the host. Otherwise it run the \'next\'
! 1681: (above) test.
! 1682:
! 1683: .I afterselect,on
! 1684: \- [ATA only] perform an offline read scan after a Selective Self\-test
! 1685: has completed. This option must be used together with one or more of
! 1686: the \fIselect,N\-M\fP options above. If the LBAs that have been
! 1687: specified in the Selective self\-test pass the test with no errors
! 1688: found, then read scan the \fBremainder\fP of the disk. If the device
! 1689: is powered\-cycled while this read scan is in progress, the read scan
! 1690: will be automatically resumed after a time specified by the pending
! 1691: timer (see below). The value of this option is preserved between
! 1692: selective self\-tests.
! 1693:
! 1694: .I afterselect,off
! 1695: \- [ATA only] do not read scan the remainder of the disk after a
! 1696: Selective self\-test has completed. This option must be use together
! 1697: with one or more of the \fIselect,N\-M\fP options above. The value of this
! 1698: option is preserved between selective self\-tests.
! 1699:
! 1700: .I pending,N
! 1701: \- [ATA only] set the pending offline read scan timer to N minutes.
! 1702: Here N is an integer in the range from 0 to 65535 inclusive. If the
! 1703: device is powered off during a read scan after a Selective self\-test,
! 1704: then resume the test automatically N minutes after power\-up. This
! 1705: option must be use together with one or more of the \fIselect,N\-M\fP
! 1706: options above. The value of this option is preserved between selective
! 1707: self\-tests.
! 1708:
! 1709: .I vendor,N
! 1710: \- [ATA only] issues the ATA command SMART EXECUTE OFF-LINE IMMEDIATE
! 1711: with subcommand N in LBA LOW register. The subcommand is specified as
! 1712: a hex value in the range 0x00 to 0xff. Subcommands 0x40-0x7e and
! 1713: 0x90-0xff are reserved for vendor specific use, see table 61 of
! 1714: T13/1699-D Revision 6a (ATA8-ACS). Note that the subcommands
! 1715: 0x00-0x04,0x7f,0x81-0x84 are supported by other smartctl options
! 1716: (e.g. 0x01: \'\-t short\', 0x7f: \'\-X\', 0x82: \'\-C \-t long\').
! 1717:
! 1718: \fBWARNING: Only run subcommands documented by the vendor of the
! 1719: device.\fP
! 1720:
! 1721: Example for Intel (X18\-M/X25\-M G2 and 320 Series) SSDs only:
! 1722: The subcommand 0x40 (\'\-t vendor,0x40\') clears the timed workload
! 1723: related SMART attributes (226, 227, 228). Note that the raw values of
! 1724: these attributes are held at 65535 (0xffff) until the workload timer
! 1725: reaches 60 minutes.
! 1726:
! 1727: .I scttempint,N[,p]
! 1728: \- is no longer supported, use \'\-l scttempint,N[,p]\' instead, see above.
! 1729: .TP
! 1730: .B \-C, \-\-captive
! 1731: [ATA] Runs self\-tests in captive mode. This has no effect with \'\-t
! 1732: offline\' or if the \'\-t\' option is not used.
! 1733:
! 1734: \fBWARNING: Tests run in captive mode may busy out the drive for the
! 1735: length of the test. Only run captive tests on drives without any
! 1736: mounted partitions!\fP
! 1737:
! 1738: [SCSI] Runs the self\-test in "Foreground" mode.
! 1739: .TP
! 1740: .B \-X, \-\-abort
! 1741: Aborts non\-captive SMART Self Tests. Note that this
! 1742: command will abort the Offline Immediate Test routine only if your
! 1743: disk has the "Abort Offline collection upon new command" capability.
! 1744: .PP
! 1745: .SH ATA, SCSI command sets and SAT
! 1746: In the past there has been a clear distinction between storage devices
! 1747: that used the ATA and SCSI command sets. This distinction was often
! 1748: reflected in their device naming and hardware. Now various SCSI
! 1749: transports (e.g. SAS, FC and iSCSI) can interconnect to both SCSI
! 1750: disks (e.g. FC and SAS) and ATA disks (especially SATA). USB and
! 1751: IEEE 1394 storage devices use the SCSI command set externally but
! 1752: almost always contain ATA or SATA disks (or flash). The storage
! 1753: subsystems in some operating systems have started to remove the
! 1754: distinction between ATA and SCSI in their device naming policies.
! 1755: .PP
! 1756: 99% of operations that an OS performs on a disk involve the SCSI INQUIRY,
! 1757: READ CAPACITY, READ and WRITE commands, or their ATA equivalents. Since
! 1758: the SCSI commands are slightly more general than their ATA equivalents,
! 1759: many OSes are generating SCSI commands (mainly READ and WRITE) and
! 1760: letting a lower level translate them to their ATA equivalents as the
! 1761: need arises. An important note here is that "lower level" may be in
! 1762: external equipment and hence outside the control of an OS.
! 1763: .PP
! 1764: SCSI to ATA Translation (SAT) is a standard (ANSI INCITS 431-2007) that
! 1765: specifies how this translation is done. For the other 1% of operations
! 1766: that an OS performs on a disk, SAT provides two options. First is an
! 1767: optional ATA PASS-THROUGH SCSI command (there are two variants). The
! 1768: second is a translation from the closest SCSI command. Most current
! 1769: interest is in the "pass-through" option.
! 1770: .PP
! 1771: The relevance to smartmontools (and hence smartctl) is that its
! 1772: interactions with disks fall solidly into the "1%" category. So even
! 1773: if the OS can happily treat (and name) a disk as "SCSI", smartmontools
! 1774: needs to detect the native command set and act accordingly.
! 1775: As more storage manufacturers (including external SATA drives) comply
! 1776: with SAT, smartmontools is able to automatically distinguish the native
! 1777: command set of the device. In some cases the '\-d sat' option is needed
! 1778: on the command line.
! 1779: .PP
! 1780: There are also virtual disks which typically have no useful information
! 1781: to convey to smartmontools, but could conceivably in the future. An
! 1782: example of a virtual disk is the OS's view of a RAID 1 box. There are
! 1783: most likely two SATA disks inside a RAID 1 box. Addressing those SATA
! 1784: disks from a distant OS is a challenge for smartmontools. Another
! 1785: approach is running a tool like smartmontools inside the RAID 1 box (e.g.
! 1786: a Network Attached Storage (NAS) box) and fetching the logs via a
! 1787: browser.
! 1788: .PP
! 1789: .SH EXAMPLES
! 1790: .nf
! 1791: .B smartctl \-a /dev/hda
! 1792: .fi
! 1793: Print a large amount of SMART information for drive /dev/hda which is
! 1794: typically an ATA (IDE) or SATA disk in Linux.
! 1795: .PP
! 1796: .nf
! 1797: .B smartctl \-a /dev/sdb
! 1798: .fi
! 1799: Print a large amount of SMART information for drive /dev/sdb . This may
! 1800: be a SCSI disk or an ATA (SATA) disk.
! 1801: .PP
! 1802: .nf
! 1803: .B smartctl \-s off /dev/hdd
! 1804: .fi
! 1805: Disable SMART monitoring and data log collection on drive /dev/hdd .
! 1806: .PP
! 1807: .nf
! 1808: .B smartctl \-\-smart=on \-\-offlineauto=on \-\-saveauto=on /dev/hda
! 1809: .fi
! 1810: Enable SMART on drive /dev/hda, enable automatic offline
! 1811: testing every four hours, and enable autosaving of
! 1812: SMART Attributes. This is a good start\-up line for your system\'s
! 1813: init files. You can issue this command on a running system.
! 1814: .PP
! 1815: .nf
! 1816: .B smartctl \-t long /dev/hdc
! 1817: .fi
! 1818: Begin an extended self\-test of drive /dev/hdc. You can issue this
! 1819: command on a running system. The results can be seen in the self\-test
! 1820: log visible with the \'\-l selftest\' option after it has completed.
! 1821: .PP
! 1822: .nf
! 1823: .B smartctl \-s on \-t offline /dev/hda
! 1824: .fi
! 1825: Enable SMART on the disk, and begin an immediate offline test of
! 1826: drive /dev/hda. You can issue this command on a running system. The
! 1827: results are only used to update the SMART Attributes, visible
! 1828: with the \'\-A\' option. If any device errors occur, they are logged to
! 1829: the SMART error log, which can be seen with the \'\-l error\' option.
! 1830: .PP
! 1831: .nf
! 1832: .B smartctl \-A \-v 9,minutes /dev/hda
! 1833: .fi
! 1834: Shows the vendor Attributes, when the disk stores its power\-on time
! 1835: internally in minutes rather than hours.
! 1836: .PP
! 1837: .nf
! 1838: .B smartctl \-q errorsonly \-H \-l selftest /dev/hda
! 1839: .fi
! 1840: Produces output only if the device returns failing SMART status,
! 1841: or if some of the logged self\-tests ended with errors.
! 1842: .PP
! 1843: .nf
! 1844: .B smartctl \-q silent \-a /dev/hda
! 1845: .fi
! 1846: Examine all SMART data for device /dev/hda, but produce no
! 1847: printed output. You must use the exit status (the
! 1848: .B $?
! 1849: shell variable) to learn if any Attributes are out of bound, if the
! 1850: SMART status is failing, if there are errors recorded in the
! 1851: self\-test log, or if there are errors recorded in the disk error log.
! 1852: .PP
! 1853: .nf
! 1854: .B smartctl \-a \-d 3ware,0 /dev/sda
! 1855: .fi
! 1856: Examine all SMART data for the first ATA disk connected to a 3ware
! 1857: RAID controller card.
! 1858: .PP
! 1859: .nf
! 1860: .B smartctl \-a \-d 3ware,0 /dev/twe0
! 1861: .fi
! 1862: Examine all SMART data for the first ATA disk connected to a 3ware
! 1863: RAID 6000/7000/8000 controller card.
! 1864: .PP
! 1865: .nf
! 1866: .B smartctl \-a \-d 3ware,0 /dev/twa0
! 1867: .fi
! 1868: Examine all SMART data for the first ATA disk connected to a
! 1869: 3ware RAID 9000 controller card.
! 1870: .PP
! 1871: .nf
! 1872: .B smartctl \-a \-d 3ware,0 /dev/twl0
! 1873: .fi
! 1874: Examine all SMART data for the first SATA (not SAS) disk connected to a
! 1875: 3ware RAID 9750 controller card.
! 1876: .PP
! 1877: .nf
! 1878: .B smartctl \-t short \-d 3ware,3 /dev/sdb
! 1879: .fi
! 1880: Start a short self\-test on the fourth ATA disk connected to the 3ware RAID
! 1881: controller card which is the second SCSI device /dev/sdb.
! 1882: .PP
! 1883: .nf
! 1884: .B smartctl \-t long \-d areca,4 /dev/sg2
! 1885: .fi
! 1886: Start a long self\-test on the fourth SATA disk connected to an Areca RAID
! 1887: controller addressed by /dev/sg2.
! 1888: .PP
! 1889: .nf
! 1890: .B smartctl \-a \-d hpt,1/3 /dev/sda (under Linux)
! 1891: .B smartctl \-a \-d hpt,1/3 /dev/hptrr (under FreeBSD)
! 1892: .fi
! 1893: Examine all SMART data for the (S)ATA disk directly connected to the third channel of the
! 1894: first HighPoint RocketRAID controller card.
! 1895: .nf
! 1896: .PP
! 1897: .nf
! 1898: .B smartctl \-t short \-d hpt,1/1/2 /dev/sda (under Linux)
! 1899: .B smartctl \-t short \-d hpt,1/1/2 /dev/hptrr (under FreeBSD)
! 1900: .fi
! 1901: Start a short self\-test on the (S)ATA disk connected to second pmport on the
! 1902: first channel of the first HighPoint RocketRAID controller card.
! 1903: .PP
! 1904: .nf
! 1905: .B smartctl \-t select,10\-100 \-t select,30\-300 \-t afterselect,on \-t pending,45 /dev/hda
! 1906: .fi
! 1907: Run a selective self\-test on LBAs 10 to 100 and 30 to 300. After the
! 1908: these LBAs have been tested, read\-scan the remainder of the disk. If the disk is
! 1909: power\-cycled during the read\-scan, resume the scan 45 minutes after power to the
! 1910: device is restored.
! 1911: .PP
! 1912: .nf
! 1913: .B smartctl \-a \-d cciss,0 /dev/cciss/c0d0
! 1914: .fi
! 1915: Examine all SMART data for the first SCSI disk connected to a cciss
! 1916: RAID controller card.
! 1917: .PP
! 1918: .SH RETURN VALUES
! 1919: The return values of \fBsmartctl\fP are defined by a bitmask. If all
! 1920: is well with the disk, the return value (exit status) of
! 1921: \fBsmartctl\fP is 0 (all bits turned off). If a problem occurs, or an
! 1922: error, potential error, or fault is detected, then a non\-zero status
! 1923: is returned. In this case, the eight different bits in the return
! 1924: value have the following meanings for ATA disks; some of these values
! 1925: may also be returned for SCSI disks.
! 1926: .TP
! 1927: .B Bit 0:
! 1928: Command line did not parse.
! 1929: .TP
! 1930: .B Bit 1:
! 1931: Device open failed, device did not return an IDENTIFY DEVICE structure,
! 1932: or device is in a low-power mode (see \'\-n\' option above).
! 1933: .TP
! 1934: .B Bit 2:
! 1935: Some SMART command to the disk failed, or there was a checksum error
! 1936: in a SMART data structure (see \'\-b\' option above).
! 1937: .TP
! 1938: .B Bit 3:
! 1939: SMART status check returned "DISK FAILING".
! 1940: .TP
! 1941: .B Bit 4:
! 1942: We found prefail Attributes <= threshold.
! 1943: .TP
! 1944: .B Bit 5:
! 1945: SMART status check returned "DISK OK" but we found that some (usage
! 1946: or prefail) Attributes have been <= threshold at some time in the
! 1947: past.
! 1948: .TP
! 1949: .B Bit 6:
! 1950: The device error log contains records of errors.
! 1951: .TP
! 1952: .B Bit 7:
! 1953: The device self\-test log contains records of errors.
! 1954: [ATA only] Failed self-tests outdated by a newer successful extended
! 1955: self\-test are ignored.
! 1956: .PP
! 1957: To test within the shell for whether or not the different bits are
! 1958: turned on or off, you can use the following type of construction (this
! 1959: is bash syntax):
! 1960: .nf
! 1961: .B smartstat=$(($? & 8))
! 1962: .fi
! 1963: This looks at only at bit 3 of the exit status
! 1964: .B $?
! 1965: (since 8=2^3). The shell variable
! 1966: $smartstat will be nonzero if SMART status check returned "disk
! 1967: failing" and zero otherwise.
! 1968:
! 1969: This bash script prints all status bits:
! 1970: .nf
! 1971: status=$?
! 1972: for ((i=0; i<8; i++)); do
! 1973: echo "Bit $i: $((status & 2**i && 1))"
! 1974: done
! 1975: .fi
! 1976:
! 1977: .PP
! 1978: .SH NOTES
! 1979: The TapeAlert log page flags are cleared for the initiator when the
! 1980: page is read. This means that each alert condition is reported only
! 1981: once by \fBsmartctl\fP for each initiator for each activation of the
! 1982: condition.
! 1983:
! 1984: .PP
! 1985: .SH AUTHOR
! 1986: \fBBruce Allen\fP smartmontools\-support@lists.sourceforge.net
! 1987: .fi
! 1988: University of Wisconsin \- Milwaukee Physics Department
! 1989:
! 1990: .PP
! 1991: .SH CONTRIBUTORS
! 1992: The following have made large contributions to smartmontools:
! 1993: .nf
! 1994: \fBCasper Dik\fP (Solaris SCSI interface)
! 1995: \fBChristian Franke\fP (Windows interface, C++ redesign, USB support, ...)
! 1996: \fBDouglas Gilbert\fP (SCSI subsystem)
! 1997: \fBGuido Guenther\fP (Autoconf/Automake packaging)
! 1998: \fBGeoffrey Keating\fP (Darwin ATA interface)
! 1999: \fBEduard Martinescu\fP (FreeBSD interface)
! 2000: \fBFr\['e]d\['e]ric L. W. Meunier\fP (Web site and Mailing list)
! 2001: \fBGabriele Pohl\fP (Web site and Wiki, conversion from CVS to SVN)
! 2002: \fBKeiji Sawada\fP (Solaris ATA interface)
! 2003: \fBManfred Schwarb\fP (Drive database)
! 2004: \fBSergey Svishchev\fP (NetBSD interface)
! 2005: \fBDavid Snyder and Sergey Svishchev\fP (OpenBSD interface)
! 2006: \fBPhil Williams\fP (User interface and drive database)
! 2007: \fBYuri Dario\fP (OS/2, eComStation interface)
! 2008: \fBShengfeng Zhou\fP (Linux/FreeBSD HighPoint RocketRAID interface)
! 2009: .fi
! 2010: Many other individuals have made smaller contributions and corrections.
! 2011:
! 2012: .PP
! 2013: .SH CREDITS
! 2014: .fi
! 2015: This code was derived from the smartsuite package, written by Michael
! 2016: Cornwell, and from the previous UCSC smartsuite package. It extends
! 2017: these to cover ATA\-5 disks. This code was originally developed as a
! 2018: Senior Thesis by Michael Cornwell at the Concurrent Systems Laboratory
! 2019: (now part of the Storage Systems Research Center), Jack Baskin School
! 2020: of Engineering, University of California, Santa
! 2021: Cruz. \fBhttp://ssrc.soe.ucsc.edu/\fP .
! 2022: .SH
! 2023: HOME PAGE FOR SMARTMONTOOLS:
! 2024: .fi
! 2025: Please see the following web site for updates, further documentation, bug
! 2026: reports and patches: \fBhttp://smartmontools.sourceforge.net/\fP
! 2027:
! 2028: .SH
! 2029: SEE ALSO:
! 2030: \fBsmartd\fP(8), \fBbadblocks\fP(8), \fBide\-smart\fP(8).
! 2031: .SH
! 2032: REFERENCES FOR SMART
! 2033: .fi
! 2034: An introductory article about smartmontools is \fIMonitoring Hard
! 2035: Disks with SMART\fP, by Bruce Allen, Linux Journal, January 2004,
! 2036: pages 74\-77. This is \fBhttp://www.linuxjournal.com/article/6983\fP
! 2037: online.
! 2038:
! 2039: If you would like to understand better how SMART works, and what it
! 2040: does, a good place to start is with Sections 4.8 and 6.54 of the first
! 2041: volume of the \'AT Attachment with Packet Interface\-7\' (ATA/ATAPI\-7)
! 2042: specification Revision 4b. This documents the SMART functionality which the
! 2043: \fBsmartmontools\fP utilities provide access to.
! 2044:
! 2045: .fi
! 2046: The functioning of SMART was originally defined by the SFF\-8035i
! 2047: revision 2 and the SFF\-8055i revision 1.4 specifications. These are
! 2048: publications of the Small Form Factors (SFF) Committee.
! 2049:
! 2050: Links to these and other documents may be found on the Links page of the
! 2051: \fBsmartmontools\fP Wiki at
! 2052: \fBhttp://sourceforge.net/apps/trac/smartmontools/wiki/Links\fP .
! 2053:
! 2054: .SH
! 2055: SVN ID OF THIS PAGE:
! 2056: $Id: smartctl.8.in 3452 2011-10-15 15:22:09Z chrfranke $
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>