--- embedaddon/smartmontools/smartd.8.in 2012/02/21 16:32:16 1.1.1.1 +++ embedaddon/smartmontools/smartd.8.in 2012/10/09 09:36:45 1.1.1.2 @@ -1,7 +1,7 @@ .ig Copyright (C) 2002-10 Bruce Allen -$Id: smartd.8.in,v 1.1.1.1 2012/02/21 16:32:16 misho Exp $ +$Id: smartd.8.in,v 1.1.1.2 2012/10/09 09:36:45 misho Exp $ This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -92,9 +92,9 @@ When \fBsmartd\fP is running in debug mode, the \fBINT (normally generated from a shell with CONTROL\-C) is treated in the same way as a \fBHUP\fP signal: it makes \fBsmartd\fP reload its configuration file. To exit \fBsmartd\fP use CONTROL-\e -.\" %IF OS Windows Cygwin -(Cygwin: 2x CONTROL\-C, Windows: CONTROL\-Break). -.\" %ENDIF OS Windows Cygwin +.\" %IF OS Windows +(Windows: CONTROL\-Break). +.\" %ENDIF OS Windows On startup, in the absence of the configuration file \fB/usr/local/etc/smartd.conf\fP, the \fBsmartd\fP daemon first scans for all @@ -116,7 +116,7 @@ Authoritative list of disk devices is obtained from sy .\" %ENDIF OS NetBSD OpenBSD .\" %IF OS Solaris .IP \fBSOLARIS:\fP 9 -Examine all entries \fB"/dev/rdsk/c?t?d?s?"\fP for IDE/ATA and SCSI disk +Examine all entries \fB"/dev/rdsk/*s0"\fP for IDE/ATA and SCSI disk devices, and entries \fB"/dev/rmt/*"\fP for SCSI tape devices. .\" %ENDIF OS Solaris .\" %IF OS Darwin @@ -140,9 +140,9 @@ If a 3ware 9000 controller is installed, examine all e \fB"/dev/sdX"\fP) and all physical disks (\'ports\' \fB",N"\fP) detected behind this controller. Same for a second controller if present. -[NEW EXPERIMENTAL SMARTD FEATURE] If directive \'\-d csmi\' is specified, -examine all entries \fB"/dev/csmi[0\-9],N"\fP for drives behind Intel -Matrix RAID driver. +If directive \'\-d csmi\' or no \'\-d\' directive is specified, +examine all entries \fB"/dev/csmi[0\-9],N"\fP for drives behind an Intel +ICHxR controller with RST driver. .\" %ENDIF OS Windows Cygwin .\" %IF OS Cygwin .IP \fBCYGWIN\fP: 9 @@ -217,15 +217,13 @@ information to STDOUT rather than logging it to SYSLOG \fBfork(2)\fP into the background and detach from the controlling terminal. In this mode, \fBsmartd\fP also prints more verbose information about what it is doing than when operating in "daemon" -mode. In this mode, the \fBQUIT\fP signal (normally generated from a +mode. In this mode, the \fBINT\fP signal (normally generated from a terminal with CONTROL\-C) makes \fBsmartd\fP reload its configuration file. Please use CONTROL-\e to exit -.\" %IF OS Windows Cygwin -(Cygwin: 2x CONTROL\-C, Windows: CONTROL\-Break). -.\" %ENDIF OS Windows Cygwin .\" %IF OS Windows +(Windows: CONTROL\-Break). -Windows only: The "debug" mode can be toggled by the command +[Windows only] The "debug" mode can be toggled by the command \fBsmartd sigusr2\fP. A new console for debug output is opened when debug mode is enabled. .\" %ENDIF OS Windows @@ -458,7 +456,7 @@ an important change (which usually results in a SYSLOG .\" %IF OS Windows .TP .B \-\-service -Windows only: Enables \fBsmartd\fP to run as a Windows service. +[Windows only] Enables \fBsmartd\fP to run as a Windows service. The option must be specified in the service command line as the first argument. It should not be used from console. See NOTES below for details. @@ -687,7 +685,7 @@ A compile time constant of\fB smartd\fP was too small. excessive number of disks, or by lines in \fB /usr/local/etc/smartd.conf\fP that are too long. Please report this problem to \fB smartmontools-support@lists.sourceforge.net\fP. .TP -.B 10 +.B 10: An inconsistency was found in \fBsmartd\fP\'s internal data structures. This should never happen. It must be due to either a coding or compiler bug. \fIPlease\fP report such failures to @@ -790,4 +788,4 @@ Links to these and other documents may be found on the .SH SVN ID OF THIS PAGE: -$Id: smartd.8.in,v 1.1.1.1 2012/02/21 16:32:16 misho Exp $ +$Id: smartd.8.in,v 1.1.1.2 2012/10/09 09:36:45 misho Exp $