Annotation of embedaddon/sqlite3/ltmain.sh, revision 1.1
1.1 ! misho 1: # Generated from ltmain.m4sh.
! 2:
! 3: # ltmain.sh (GNU libtool) 2.2.6
! 4: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
! 5:
! 6: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
! 7: # This is free software; see the source for copying conditions. There is NO
! 8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
! 9:
! 10: # GNU Libtool is free software; you can redistribute it and/or modify
! 11: # it under the terms of the GNU General Public License as published by
! 12: # the Free Software Foundation; either version 2 of the License, or
! 13: # (at your option) any later version.
! 14: #
! 15: # As a special exception to the GNU General Public License,
! 16: # if you distribute this file as part of a program or library that
! 17: # is built using GNU Libtool, you may include this file under the
! 18: # same distribution terms that you use for the rest of that program.
! 19: #
! 20: # GNU Libtool is distributed in the hope that it will be useful, but
! 21: # WITHOUT ANY WARRANTY; without even the implied warranty of
! 22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 23: # General Public License for more details.
! 24: #
! 25: # You should have received a copy of the GNU General Public License
! 26: # along with GNU Libtool; see the file COPYING. If not, a copy
! 27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
! 28: # or obtained by writing to the Free Software Foundation, Inc.,
! 29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
! 30:
! 31: # Usage: $progname [OPTION]... [MODE-ARG]...
! 32: #
! 33: # Provide generalized library-building support services.
! 34: #
! 35: # --config show all configuration variables
! 36: # --debug enable verbose shell tracing
! 37: # -n, --dry-run display commands without modifying any files
! 38: # --features display basic configuration information and exit
! 39: # --mode=MODE use operation mode MODE
! 40: # --preserve-dup-deps don't remove duplicate dependency libraries
! 41: # --quiet, --silent don't print informational messages
! 42: # --tag=TAG use configuration variables from tag TAG
! 43: # -v, --verbose print informational messages (default)
! 44: # --version print version information
! 45: # -h, --help print short or long help message
! 46: #
! 47: # MODE must be one of the following:
! 48: #
! 49: # clean remove files from the build directory
! 50: # compile compile a source file into a libtool object
! 51: # execute automatically set library path, then run a program
! 52: # finish complete the installation of libtool libraries
! 53: # install install libraries or executables
! 54: # link create a library or an executable
! 55: # uninstall remove libraries from an installed directory
! 56: #
! 57: # MODE-ARGS vary depending on the MODE.
! 58: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
! 59: #
! 60: # When reporting a bug, please describe a test case to reproduce it and
! 61: # include the following information:
! 62: #
! 63: # host-triplet: $host
! 64: # shell: $SHELL
! 65: # compiler: $LTCC
! 66: # compiler flags: $LTCFLAGS
! 67: # linker: $LD (gnu? $with_gnu_ld)
! 68: # $progname: (GNU libtool) 2.2.6
! 69: # automake: $automake_version
! 70: # autoconf: $autoconf_version
! 71: #
! 72: # Report bugs to <bug-libtool@gnu.org>.
! 73:
! 74: PROGRAM=ltmain.sh
! 75: PACKAGE=libtool
! 76: VERSION=2.2.6
! 77: TIMESTAMP=""
! 78: package_revision=1.3012
! 79:
! 80: # Be Bourne compatible
! 81: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
! 82: emulate sh
! 83: NULLCMD=:
! 84: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
! 85: # is contrary to our usage. Disable this feature.
! 86: alias -g '${1+"$@"}'='"$@"'
! 87: setopt NO_GLOB_SUBST
! 88: else
! 89: case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
! 90: fi
! 91: BIN_SH=xpg4; export BIN_SH # for Tru64
! 92: DUALCASE=1; export DUALCASE # for MKS sh
! 93:
! 94: # NLS nuisances: We save the old values to restore during execute mode.
! 95: # Only set LANG and LC_ALL to C if already set.
! 96: # These must not be set unconditionally because not all systems understand
! 97: # e.g. LANG=C (notably SCO).
! 98: lt_user_locale=
! 99: lt_safe_locale=
! 100: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 101: do
! 102: eval "if test \"\${$lt_var+set}\" = set; then
! 103: save_$lt_var=\$$lt_var
! 104: $lt_var=C
! 105: export $lt_var
! 106: lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
! 107: lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
! 108: fi"
! 109: done
! 110:
! 111: $lt_unset CDPATH
! 112:
! 113:
! 114:
! 115:
! 116:
! 117: : ${CP="cp -f"}
! 118: : ${ECHO="echo"}
! 119: : ${EGREP="/usr/bin/grep -E"}
! 120: : ${FGREP="/usr/bin/grep -F"}
! 121: : ${GREP="/usr/bin/grep"}
! 122: : ${LN_S="ln -s"}
! 123: : ${MAKE="make"}
! 124: : ${MKDIR="mkdir"}
! 125: : ${MV="mv -f"}
! 126: : ${RM="rm -f"}
! 127: : ${SED="/opt/local/bin/gsed"}
! 128: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
! 129: : ${Xsed="$SED -e 1s/^X//"}
! 130:
! 131: # Global variables:
! 132: EXIT_SUCCESS=0
! 133: EXIT_FAILURE=1
! 134: EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
! 135: EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
! 136:
! 137: exit_status=$EXIT_SUCCESS
! 138:
! 139: # Make sure IFS has a sensible default
! 140: lt_nl='
! 141: '
! 142: IFS=" $lt_nl"
! 143:
! 144: dirname="s,/[^/]*$,,"
! 145: basename="s,^.*/,,"
! 146:
! 147: # func_dirname_and_basename file append nondir_replacement
! 148: # perform func_basename and func_dirname in a single function
! 149: # call:
! 150: # dirname: Compute the dirname of FILE. If nonempty,
! 151: # add APPEND to the result, otherwise set result
! 152: # to NONDIR_REPLACEMENT.
! 153: # value returned in "$func_dirname_result"
! 154: # basename: Compute filename of FILE.
! 155: # value retuned in "$func_basename_result"
! 156: # Implementation must be kept synchronized with func_dirname
! 157: # and func_basename. For efficiency, we do not delegate to
! 158: # those functions but instead duplicate the functionality here.
! 159: func_dirname_and_basename ()
! 160: {
! 161: # Extract subdirectory from the argument.
! 162: func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
! 163: if test "X$func_dirname_result" = "X${1}"; then
! 164: func_dirname_result="${3}"
! 165: else
! 166: func_dirname_result="$func_dirname_result${2}"
! 167: fi
! 168: func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
! 169: }
! 170:
! 171: # Generated shell functions inserted here.
! 172:
! 173: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
! 174: # is ksh but when the shell is invoked as "sh" and the current value of
! 175: # the _XPG environment variable is not equal to 1 (one), the special
! 176: # positional parameter $0, within a function call, is the name of the
! 177: # function.
! 178: progpath="$0"
! 179:
! 180: # The name of this program:
! 181: # In the unlikely event $progname began with a '-', it would play havoc with
! 182: # func_echo (imagine progname=-n), so we prepend ./ in that case:
! 183: func_dirname_and_basename "$progpath"
! 184: progname=$func_basename_result
! 185: case $progname in
! 186: -*) progname=./$progname ;;
! 187: esac
! 188:
! 189: # Make sure we have an absolute path for reexecution:
! 190: case $progpath in
! 191: [\\/]*|[A-Za-z]:\\*) ;;
! 192: *[\\/]*)
! 193: progdir=$func_dirname_result
! 194: progdir=`cd "$progdir" && pwd`
! 195: progpath="$progdir/$progname"
! 196: ;;
! 197: *)
! 198: save_IFS="$IFS"
! 199: IFS=:
! 200: for progdir in $PATH; do
! 201: IFS="$save_IFS"
! 202: test -x "$progdir/$progname" && break
! 203: done
! 204: IFS="$save_IFS"
! 205: test -n "$progdir" || progdir=`pwd`
! 206: progpath="$progdir/$progname"
! 207: ;;
! 208: esac
! 209:
! 210: # Sed substitution that helps us do robust quoting. It backslashifies
! 211: # metacharacters that are still active within double-quoted strings.
! 212: Xsed="${SED}"' -e 1s/^X//'
! 213: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
! 214:
! 215: # Same as above, but do not quote variable references.
! 216: double_quote_subst='s/\(["`\\]\)/\\\1/g'
! 217:
! 218: # Re-`\' parameter expansions in output of double_quote_subst that were
! 219: # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
! 220: # in input to double_quote_subst, that '$' was protected from expansion.
! 221: # Since each input `\' is now two `\'s, look for any number of runs of
! 222: # four `\'s followed by two `\'s and then a '$'. `\' that '$'.
! 223: bs='\\'
! 224: bs2='\\\\'
! 225: bs4='\\\\\\\\'
! 226: dollar='\$'
! 227: sed_double_backslash="\
! 228: s/$bs4/&\\
! 229: /g
! 230: s/^$bs2$dollar/$bs&/
! 231: s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
! 232: s/\n//g"
! 233:
! 234: # Standard options:
! 235: opt_dry_run=false
! 236: opt_help=false
! 237: opt_quiet=false
! 238: opt_verbose=false
! 239: opt_warning=:
! 240:
! 241: # func_echo arg...
! 242: # Echo program name prefixed message, along with the current mode
! 243: # name if it has been set yet.
! 244: func_echo ()
! 245: {
! 246: $ECHO "$progname${mode+: }$mode: $*"
! 247: }
! 248:
! 249: # func_verbose arg...
! 250: # Echo program name prefixed message in verbose mode only.
! 251: func_verbose ()
! 252: {
! 253: $opt_verbose && func_echo ${1+"$@"}
! 254:
! 255: # A bug in bash halts the script if the last line of a function
! 256: # fails when set -e is in force, so we need another command to
! 257: # work around that:
! 258: :
! 259: }
! 260:
! 261: # func_error arg...
! 262: # Echo program name prefixed message to standard error.
! 263: func_error ()
! 264: {
! 265: $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
! 266: }
! 267:
! 268: # func_warning arg...
! 269: # Echo program name prefixed warning message to standard error.
! 270: func_warning ()
! 271: {
! 272: $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
! 273:
! 274: # bash bug again:
! 275: :
! 276: }
! 277:
! 278: # func_fatal_error arg...
! 279: # Echo program name prefixed message to standard error, and exit.
! 280: func_fatal_error ()
! 281: {
! 282: func_error ${1+"$@"}
! 283: exit $EXIT_FAILURE
! 284: }
! 285:
! 286: # func_fatal_help arg...
! 287: # Echo program name prefixed message to standard error, followed by
! 288: # a help hint, and exit.
! 289: func_fatal_help ()
! 290: {
! 291: func_error ${1+"$@"}
! 292: func_fatal_error "$help"
! 293: }
! 294: help="Try \`$progname --help' for more information." ## default
! 295:
! 296:
! 297: # func_grep expression filename
! 298: # Check whether EXPRESSION matches any line of FILENAME, without output.
! 299: func_grep ()
! 300: {
! 301: $GREP "$1" "$2" >/dev/null 2>&1
! 302: }
! 303:
! 304:
! 305: # func_mkdir_p directory-path
! 306: # Make sure the entire path to DIRECTORY-PATH is available.
! 307: func_mkdir_p ()
! 308: {
! 309: my_directory_path="$1"
! 310: my_dir_list=
! 311:
! 312: if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
! 313:
! 314: # Protect directory names starting with `-'
! 315: case $my_directory_path in
! 316: -*) my_directory_path="./$my_directory_path" ;;
! 317: esac
! 318:
! 319: # While some portion of DIR does not yet exist...
! 320: while test ! -d "$my_directory_path"; do
! 321: # ...make a list in topmost first order. Use a colon delimited
! 322: # list incase some portion of path contains whitespace.
! 323: my_dir_list="$my_directory_path:$my_dir_list"
! 324:
! 325: # If the last portion added has no slash in it, the list is done
! 326: case $my_directory_path in */*) ;; *) break ;; esac
! 327:
! 328: # ...otherwise throw away the child directory and loop
! 329: my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
! 330: done
! 331: my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
! 332:
! 333: save_mkdir_p_IFS="$IFS"; IFS=':'
! 334: for my_dir in $my_dir_list; do
! 335: IFS="$save_mkdir_p_IFS"
! 336: # mkdir can fail with a `File exist' error if two processes
! 337: # try to create one of the directories concurrently. Don't
! 338: # stop in that case!
! 339: $MKDIR "$my_dir" 2>/dev/null || :
! 340: done
! 341: IFS="$save_mkdir_p_IFS"
! 342:
! 343: # Bail out if we (or some other process) failed to create a directory.
! 344: test -d "$my_directory_path" || \
! 345: func_fatal_error "Failed to create \`$1'"
! 346: fi
! 347: }
! 348:
! 349:
! 350: # func_mktempdir [string]
! 351: # Make a temporary directory that won't clash with other running
! 352: # libtool processes, and avoids race conditions if possible. If
! 353: # given, STRING is the basename for that directory.
! 354: func_mktempdir ()
! 355: {
! 356: my_template="${TMPDIR-/tmp}/${1-$progname}"
! 357:
! 358: if test "$opt_dry_run" = ":"; then
! 359: # Return a directory name, but don't create it in dry-run mode
! 360: my_tmpdir="${my_template}-$$"
! 361: else
! 362:
! 363: # If mktemp works, use that first and foremost
! 364: my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
! 365:
! 366: if test ! -d "$my_tmpdir"; then
! 367: # Failing that, at least try and use $RANDOM to avoid a race
! 368: my_tmpdir="${my_template}-${RANDOM-0}$$"
! 369:
! 370: save_mktempdir_umask=`umask`
! 371: umask 0077
! 372: $MKDIR "$my_tmpdir"
! 373: umask $save_mktempdir_umask
! 374: fi
! 375:
! 376: # If we're not in dry-run mode, bomb out on failure
! 377: test -d "$my_tmpdir" || \
! 378: func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
! 379: fi
! 380:
! 381: $ECHO "X$my_tmpdir" | $Xsed
! 382: }
! 383:
! 384:
! 385: # func_quote_for_eval arg
! 386: # Aesthetically quote ARG to be evaled later.
! 387: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
! 388: # is double-quoted, suitable for a subsequent eval, whereas
! 389: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
! 390: # which are still active within double quotes backslashified.
! 391: func_quote_for_eval ()
! 392: {
! 393: case $1 in
! 394: *[\\\`\"\$]*)
! 395: func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
! 396: *)
! 397: func_quote_for_eval_unquoted_result="$1" ;;
! 398: esac
! 399:
! 400: case $func_quote_for_eval_unquoted_result in
! 401: # Double-quote args containing shell metacharacters to delay
! 402: # word splitting, command substitution and and variable
! 403: # expansion for a subsequent eval.
! 404: # Many Bourne shells cannot handle close brackets correctly
! 405: # in scan sets, so we specify it separately.
! 406: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 407: func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
! 408: ;;
! 409: *)
! 410: func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
! 411: esac
! 412: }
! 413:
! 414:
! 415: # func_quote_for_expand arg
! 416: # Aesthetically quote ARG to be evaled later; same as above,
! 417: # but do not quote variable references.
! 418: func_quote_for_expand ()
! 419: {
! 420: case $1 in
! 421: *[\\\`\"]*)
! 422: my_arg=`$ECHO "X$1" | $Xsed \
! 423: -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
! 424: *)
! 425: my_arg="$1" ;;
! 426: esac
! 427:
! 428: case $my_arg in
! 429: # Double-quote args containing shell metacharacters to delay
! 430: # word splitting and command substitution for a subsequent eval.
! 431: # Many Bourne shells cannot handle close brackets correctly
! 432: # in scan sets, so we specify it separately.
! 433: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 434: my_arg="\"$my_arg\""
! 435: ;;
! 436: esac
! 437:
! 438: func_quote_for_expand_result="$my_arg"
! 439: }
! 440:
! 441:
! 442: # func_show_eval cmd [fail_exp]
! 443: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 444: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 445: # is given, then evaluate it.
! 446: func_show_eval ()
! 447: {
! 448: my_cmd="$1"
! 449: my_fail_exp="${2-:}"
! 450:
! 451: ${opt_silent-false} || {
! 452: func_quote_for_expand "$my_cmd"
! 453: eval "func_echo $func_quote_for_expand_result"
! 454: }
! 455:
! 456: if ${opt_dry_run-false}; then :; else
! 457: eval "$my_cmd"
! 458: my_status=$?
! 459: if test "$my_status" -eq 0; then :; else
! 460: eval "(exit $my_status); $my_fail_exp"
! 461: fi
! 462: fi
! 463: }
! 464:
! 465:
! 466: # func_show_eval_locale cmd [fail_exp]
! 467: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 468: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 469: # is given, then evaluate it. Use the saved locale for evaluation.
! 470: func_show_eval_locale ()
! 471: {
! 472: my_cmd="$1"
! 473: my_fail_exp="${2-:}"
! 474:
! 475: ${opt_silent-false} || {
! 476: func_quote_for_expand "$my_cmd"
! 477: eval "func_echo $func_quote_for_expand_result"
! 478: }
! 479:
! 480: if ${opt_dry_run-false}; then :; else
! 481: eval "$lt_user_locale
! 482: $my_cmd"
! 483: my_status=$?
! 484: eval "$lt_safe_locale"
! 485: if test "$my_status" -eq 0; then :; else
! 486: eval "(exit $my_status); $my_fail_exp"
! 487: fi
! 488: fi
! 489: }
! 490:
! 491:
! 492:
! 493:
! 494:
! 495: # func_version
! 496: # Echo version message to standard output and exit.
! 497: func_version ()
! 498: {
! 499: $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
! 500: s/^# //
! 501: s/^# *$//
! 502: s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
! 503: p
! 504: }' < "$progpath"
! 505: exit $?
! 506: }
! 507:
! 508: # func_usage
! 509: # Echo short help message to standard output and exit.
! 510: func_usage ()
! 511: {
! 512: $SED -n '/^# Usage:/,/# -h/ {
! 513: s/^# //
! 514: s/^# *$//
! 515: s/\$progname/'$progname'/
! 516: p
! 517: }' < "$progpath"
! 518: $ECHO
! 519: $ECHO "run \`$progname --help | more' for full usage"
! 520: exit $?
! 521: }
! 522:
! 523: # func_help
! 524: # Echo long help message to standard output and exit.
! 525: func_help ()
! 526: {
! 527: $SED -n '/^# Usage:/,/# Report bugs to/ {
! 528: s/^# //
! 529: s/^# *$//
! 530: s*\$progname*'$progname'*
! 531: s*\$host*'"$host"'*
! 532: s*\$SHELL*'"$SHELL"'*
! 533: s*\$LTCC*'"$LTCC"'*
! 534: s*\$LTCFLAGS*'"$LTCFLAGS"'*
! 535: s*\$LD*'"$LD"'*
! 536: s/\$with_gnu_ld/'"$with_gnu_ld"'/
! 537: s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
! 538: s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
! 539: p
! 540: }' < "$progpath"
! 541: exit $?
! 542: }
! 543:
! 544: # func_missing_arg argname
! 545: # Echo program name prefixed message to standard error and set global
! 546: # exit_cmd.
! 547: func_missing_arg ()
! 548: {
! 549: func_error "missing argument for $1"
! 550: exit_cmd=exit
! 551: }
! 552:
! 553: exit_cmd=:
! 554:
! 555:
! 556:
! 557:
! 558:
! 559: # Check that we have a working $ECHO.
! 560: if test "X$1" = X--no-reexec; then
! 561: # Discard the --no-reexec flag, and continue.
! 562: shift
! 563: elif test "X$1" = X--fallback-echo; then
! 564: # Avoid inline document here, it may be left over
! 565: :
! 566: elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
! 567: # Yippee, $ECHO works!
! 568: :
! 569: else
! 570: # Restart under the correct shell, and then maybe $ECHO will work.
! 571: exec $SHELL "$progpath" --no-reexec ${1+"$@"}
! 572: fi
! 573: # Same for EGREP, and just to be sure, do LTCC as well
! 574: if test "x$EGREP" = x ; then
! 575: EGREP=egrep
! 576: fi
! 577: if test "x$LTCC" = x ; then
! 578: LTCC=${CC-gcc}
! 579: fi
! 580:
! 581: if test "X$1" = X--fallback-echo; then
! 582: # used as fallback echo
! 583: shift
! 584: cat <<EOF
! 585: $*
! 586: EOF
! 587: exit $EXIT_SUCCESS
! 588: fi
! 589:
! 590: magic="%%%MAGIC variable%%%"
! 591: magic_exe="%%%MAGIC EXE variable%%%"
! 592:
! 593: # Global variables.
! 594: # $mode is unset
! 595: nonopt=
! 596: execute_dlfiles=
! 597: preserve_args=
! 598: lo2o="s/\\.lo\$/.${objext}/"
! 599: o2lo="s/\\.${objext}\$/.lo/"
! 600: extracted_archives=
! 601: extracted_serial=0
! 602:
! 603: opt_dry_run=false
! 604: opt_duplicate_deps=false
! 605: opt_silent=false
! 606: opt_debug=:
! 607:
! 608: # If this variable is set in any of the actions, the command in it
! 609: # will be execed at the end. This prevents here-documents from being
! 610: # left over by shells.
! 611: exec_cmd=
! 612:
! 613: # func_fatal_configuration arg...
! 614: # Echo program name prefixed message to standard error, followed by
! 615: # a configuration failure hint, and exit.
! 616: func_fatal_configuration ()
! 617: {
! 618: func_error ${1+"$@"}
! 619: func_error "See the $PACKAGE documentation for more information."
! 620: func_fatal_error "Fatal configuration error."
! 621: }
! 622:
! 623:
! 624: # func_config
! 625: # Display the configuration for all the tags in this script.
! 626: func_config ()
! 627: {
! 628: re_begincf='^# ### BEGIN LIBTOOL'
! 629: re_endcf='^# ### END LIBTOOL'
! 630:
! 631: # Default configuration.
! 632: $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
! 633:
! 634: # Now print the configurations for the tags.
! 635: for tagname in $taglist; do
! 636: $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
! 637: done
! 638:
! 639: exit $?
! 640: }
! 641:
! 642: # func_features
! 643: # Display the features supported by this script.
! 644: func_features ()
! 645: {
! 646: $ECHO "host: $host"
! 647: if test "$build_libtool_libs" = yes; then
! 648: $ECHO "enable shared libraries"
! 649: else
! 650: $ECHO "disable shared libraries"
! 651: fi
! 652: if test "$build_old_libs" = yes; then
! 653: $ECHO "enable static libraries"
! 654: else
! 655: $ECHO "disable static libraries"
! 656: fi
! 657:
! 658: exit $?
! 659: }
! 660:
! 661: # func_enable_tag tagname
! 662: # Verify that TAGNAME is valid, and either flag an error and exit, or
! 663: # enable the TAGNAME tag. We also add TAGNAME to the global $taglist
! 664: # variable here.
! 665: func_enable_tag ()
! 666: {
! 667: # Global variable:
! 668: tagname="$1"
! 669:
! 670: re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
! 671: re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
! 672: sed_extractcf="/$re_begincf/,/$re_endcf/p"
! 673:
! 674: # Validate tagname.
! 675: case $tagname in
! 676: *[!-_A-Za-z0-9,/]*)
! 677: func_fatal_error "invalid tag name: $tagname"
! 678: ;;
! 679: esac
! 680:
! 681: # Don't test for the "default" C tag, as we know it's
! 682: # there but not specially marked.
! 683: case $tagname in
! 684: CC) ;;
! 685: *)
! 686: if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
! 687: taglist="$taglist $tagname"
! 688:
! 689: # Evaluate the configuration. Be careful to quote the path
! 690: # and the sed script, to avoid splitting on whitespace, but
! 691: # also don't use non-portable quotes within backquotes within
! 692: # quotes we have to do it in 2 steps:
! 693: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
! 694: eval "$extractedcf"
! 695: else
! 696: func_error "ignoring unknown tag $tagname"
! 697: fi
! 698: ;;
! 699: esac
! 700: }
! 701:
! 702: # Parse options once, thoroughly. This comes as soon as possible in
! 703: # the script to make things like `libtool --version' happen quickly.
! 704: {
! 705:
! 706: # Shorthand for --mode=foo, only valid as the first argument
! 707: case $1 in
! 708: clean|clea|cle|cl)
! 709: shift; set dummy --mode clean ${1+"$@"}; shift
! 710: ;;
! 711: compile|compil|compi|comp|com|co|c)
! 712: shift; set dummy --mode compile ${1+"$@"}; shift
! 713: ;;
! 714: execute|execut|execu|exec|exe|ex|e)
! 715: shift; set dummy --mode execute ${1+"$@"}; shift
! 716: ;;
! 717: finish|finis|fini|fin|fi|f)
! 718: shift; set dummy --mode finish ${1+"$@"}; shift
! 719: ;;
! 720: install|instal|insta|inst|ins|in|i)
! 721: shift; set dummy --mode install ${1+"$@"}; shift
! 722: ;;
! 723: link|lin|li|l)
! 724: shift; set dummy --mode link ${1+"$@"}; shift
! 725: ;;
! 726: uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
! 727: shift; set dummy --mode uninstall ${1+"$@"}; shift
! 728: ;;
! 729: esac
! 730:
! 731: # Parse non-mode specific arguments:
! 732: while test "$#" -gt 0; do
! 733: opt="$1"
! 734: shift
! 735:
! 736: case $opt in
! 737: --config) func_config ;;
! 738:
! 739: --debug) preserve_args="$preserve_args $opt"
! 740: func_echo "enabling shell trace mode"
! 741: opt_debug='set -x'
! 742: $opt_debug
! 743: ;;
! 744:
! 745: -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 746: execute_dlfiles="$execute_dlfiles $1"
! 747: shift
! 748: ;;
! 749:
! 750: --dry-run | -n) opt_dry_run=: ;;
! 751: --features) func_features ;;
! 752: --finish) mode="finish" ;;
! 753:
! 754: --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 755: case $1 in
! 756: # Valid mode arguments:
! 757: clean) ;;
! 758: compile) ;;
! 759: execute) ;;
! 760: finish) ;;
! 761: install) ;;
! 762: link) ;;
! 763: relink) ;;
! 764: uninstall) ;;
! 765:
! 766: # Catch anything else as an error
! 767: *) func_error "invalid argument for $opt"
! 768: exit_cmd=exit
! 769: break
! 770: ;;
! 771: esac
! 772:
! 773: mode="$1"
! 774: shift
! 775: ;;
! 776:
! 777: --preserve-dup-deps)
! 778: opt_duplicate_deps=: ;;
! 779:
! 780: --quiet|--silent) preserve_args="$preserve_args $opt"
! 781: opt_silent=:
! 782: ;;
! 783:
! 784: --verbose| -v) preserve_args="$preserve_args $opt"
! 785: opt_silent=false
! 786: ;;
! 787:
! 788: --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 789: preserve_args="$preserve_args $opt $1"
! 790: func_enable_tag "$1" # tagname is set here
! 791: shift
! 792: ;;
! 793:
! 794: # Separate optargs to long options:
! 795: -dlopen=*|--mode=*|--tag=*)
! 796: func_opt_split "$opt"
! 797: set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
! 798: shift
! 799: ;;
! 800:
! 801: -\?|-h) func_usage ;;
! 802: --help) opt_help=: ;;
! 803: --version) func_version ;;
! 804:
! 805: -*) func_fatal_help "unrecognized option \`$opt'" ;;
! 806:
! 807: *) nonopt="$opt"
! 808: break
! 809: ;;
! 810: esac
! 811: done
! 812:
! 813:
! 814: case $host in
! 815: *cygwin* | *mingw* | *pw32* | *cegcc*)
! 816: # don't eliminate duplications in $postdeps and $predeps
! 817: opt_duplicate_compiler_generated_deps=:
! 818: ;;
! 819: *)
! 820: opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
! 821: ;;
! 822: esac
! 823:
! 824: # Having warned about all mis-specified options, bail out if
! 825: # anything was wrong.
! 826: $exit_cmd $EXIT_FAILURE
! 827: }
! 828:
! 829: # func_check_version_match
! 830: # Ensure that we are using m4 macros, and libtool script from the same
! 831: # release of libtool.
! 832: func_check_version_match ()
! 833: {
! 834: if test "$package_revision" != "$macro_revision"; then
! 835: if test "$VERSION" != "$macro_version"; then
! 836: if test -z "$macro_version"; then
! 837: cat >&2 <<_LT_EOF
! 838: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 839: $progname: definition of this LT_INIT comes from an older release.
! 840: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 841: $progname: and run autoconf again.
! 842: _LT_EOF
! 843: else
! 844: cat >&2 <<_LT_EOF
! 845: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 846: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
! 847: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 848: $progname: and run autoconf again.
! 849: _LT_EOF
! 850: fi
! 851: else
! 852: cat >&2 <<_LT_EOF
! 853: $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
! 854: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
! 855: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
! 856: $progname: of $PACKAGE $VERSION and run autoconf again.
! 857: _LT_EOF
! 858: fi
! 859:
! 860: exit $EXIT_MISMATCH
! 861: fi
! 862: }
! 863:
! 864:
! 865: ## ----------- ##
! 866: ## Main. ##
! 867: ## ----------- ##
! 868:
! 869: $opt_help || {
! 870: # Sanity checks first:
! 871: func_check_version_match
! 872:
! 873: if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
! 874: func_fatal_configuration "not configured to build any kind of library"
! 875: fi
! 876:
! 877: test -z "$mode" && func_fatal_error "error: you must specify a MODE."
! 878:
! 879:
! 880: # Darwin sucks
! 881: eval std_shrext=\"$shrext_cmds\"
! 882:
! 883:
! 884: # Only execute mode is allowed to have -dlopen flags.
! 885: if test -n "$execute_dlfiles" && test "$mode" != execute; then
! 886: func_error "unrecognized option \`-dlopen'"
! 887: $ECHO "$help" 1>&2
! 888: exit $EXIT_FAILURE
! 889: fi
! 890:
! 891: # Change the help message to a mode-specific one.
! 892: generic_help="$help"
! 893: help="Try \`$progname --help --mode=$mode' for more information."
! 894: }
! 895:
! 896:
! 897: # func_lalib_p file
! 898: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 899: # This function is only a basic sanity check; it will hardly flush out
! 900: # determined imposters.
! 901: func_lalib_p ()
! 902: {
! 903: test -f "$1" &&
! 904: $SED -e 4q "$1" 2>/dev/null \
! 905: | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
! 906: }
! 907:
! 908: # func_lalib_unsafe_p file
! 909: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 910: # This function implements the same check as func_lalib_p without
! 911: # resorting to external programs. To this end, it redirects stdin and
! 912: # closes it afterwards, without saving the original file descriptor.
! 913: # As a safety measure, use it only where a negative result would be
! 914: # fatal anyway. Works if `file' does not exist.
! 915: func_lalib_unsafe_p ()
! 916: {
! 917: lalib_p=no
! 918: if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
! 919: for lalib_p_l in 1 2 3 4
! 920: do
! 921: read lalib_p_line
! 922: case "$lalib_p_line" in
! 923: \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
! 924: esac
! 925: done
! 926: exec 0<&5 5<&-
! 927: fi
! 928: test "$lalib_p" = yes
! 929: }
! 930:
! 931: # func_ltwrapper_script_p file
! 932: # True iff FILE is a libtool wrapper script
! 933: # This function is only a basic sanity check; it will hardly flush out
! 934: # determined imposters.
! 935: func_ltwrapper_script_p ()
! 936: {
! 937: func_lalib_p "$1"
! 938: }
! 939:
! 940: # func_ltwrapper_executable_p file
! 941: # True iff FILE is a libtool wrapper executable
! 942: # This function is only a basic sanity check; it will hardly flush out
! 943: # determined imposters.
! 944: func_ltwrapper_executable_p ()
! 945: {
! 946: func_ltwrapper_exec_suffix=
! 947: case $1 in
! 948: *.exe) ;;
! 949: *) func_ltwrapper_exec_suffix=.exe ;;
! 950: esac
! 951: $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
! 952: }
! 953:
! 954: # func_ltwrapper_scriptname file
! 955: # Assumes file is an ltwrapper_executable
! 956: # uses $file to determine the appropriate filename for a
! 957: # temporary ltwrapper_script.
! 958: func_ltwrapper_scriptname ()
! 959: {
! 960: func_ltwrapper_scriptname_result=""
! 961: if func_ltwrapper_executable_p "$1"; then
! 962: func_dirname_and_basename "$1" "" "."
! 963: func_stripname '' '.exe' "$func_basename_result"
! 964: func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
! 965: fi
! 966: }
! 967:
! 968: # func_ltwrapper_p file
! 969: # True iff FILE is a libtool wrapper script or wrapper executable
! 970: # This function is only a basic sanity check; it will hardly flush out
! 971: # determined imposters.
! 972: func_ltwrapper_p ()
! 973: {
! 974: func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
! 975: }
! 976:
! 977:
! 978: # func_execute_cmds commands fail_cmd
! 979: # Execute tilde-delimited COMMANDS.
! 980: # If FAIL_CMD is given, eval that upon failure.
! 981: # FAIL_CMD may read-access the current command in variable CMD!
! 982: func_execute_cmds ()
! 983: {
! 984: $opt_debug
! 985: save_ifs=$IFS; IFS='~'
! 986: for cmd in $1; do
! 987: IFS=$save_ifs
! 988: eval cmd=\"$cmd\"
! 989: func_show_eval "$cmd" "${2-:}"
! 990: done
! 991: IFS=$save_ifs
! 992: }
! 993:
! 994:
! 995: # func_source file
! 996: # Source FILE, adding directory component if necessary.
! 997: # Note that it is not necessary on cygwin/mingw to append a dot to
! 998: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
! 999: # behavior happens only for exec(3), not for open(2)! Also, sourcing
! 1000: # `FILE.' does not work on cygwin managed mounts.
! 1001: func_source ()
! 1002: {
! 1003: $opt_debug
! 1004: case $1 in
! 1005: */* | *\\*) . "$1" ;;
! 1006: *) . "./$1" ;;
! 1007: esac
! 1008: }
! 1009:
! 1010:
! 1011: # func_infer_tag arg
! 1012: # Infer tagged configuration to use if any are available and
! 1013: # if one wasn't chosen via the "--tag" command line option.
! 1014: # Only attempt this if the compiler in the base compile
! 1015: # command doesn't match the default compiler.
! 1016: # arg is usually of the form 'gcc ...'
! 1017: func_infer_tag ()
! 1018: {
! 1019: $opt_debug
! 1020: if test -n "$available_tags" && test -z "$tagname"; then
! 1021: CC_quoted=
! 1022: for arg in $CC; do
! 1023: func_quote_for_eval "$arg"
! 1024: CC_quoted="$CC_quoted $func_quote_for_eval_result"
! 1025: done
! 1026: case $@ in
! 1027: # Blanks in the command may have been stripped by the calling shell,
! 1028: # but not from the CC environment variable when configure was run.
! 1029: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
! 1030: # Blanks at the start of $base_compile will cause this to fail
! 1031: # if we don't check for them as well.
! 1032: *)
! 1033: for z in $available_tags; do
! 1034: if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
! 1035: # Evaluate the configuration.
! 1036: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
! 1037: CC_quoted=
! 1038: for arg in $CC; do
! 1039: # Double-quote args containing other shell metacharacters.
! 1040: func_quote_for_eval "$arg"
! 1041: CC_quoted="$CC_quoted $func_quote_for_eval_result"
! 1042: done
! 1043: case "$@ " in
! 1044: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
! 1045: # The compiler in the base compile command matches
! 1046: # the one in the tagged configuration.
! 1047: # Assume this is the tagged configuration we want.
! 1048: tagname=$z
! 1049: break
! 1050: ;;
! 1051: esac
! 1052: fi
! 1053: done
! 1054: # If $tagname still isn't set, then no tagged configuration
! 1055: # was found and let the user know that the "--tag" command
! 1056: # line option must be used.
! 1057: if test -z "$tagname"; then
! 1058: func_echo "unable to infer tagged configuration"
! 1059: func_fatal_error "specify a tag with \`--tag'"
! 1060: # else
! 1061: # func_verbose "using $tagname tagged configuration"
! 1062: fi
! 1063: ;;
! 1064: esac
! 1065: fi
! 1066: }
! 1067:
! 1068:
! 1069:
! 1070: # func_write_libtool_object output_name pic_name nonpic_name
! 1071: # Create a libtool object file (analogous to a ".la" file),
! 1072: # but don't create it if we're doing a dry run.
! 1073: func_write_libtool_object ()
! 1074: {
! 1075: write_libobj=${1}
! 1076: if test "$build_libtool_libs" = yes; then
! 1077: write_lobj=\'${2}\'
! 1078: else
! 1079: write_lobj=none
! 1080: fi
! 1081:
! 1082: if test "$build_old_libs" = yes; then
! 1083: write_oldobj=\'${3}\'
! 1084: else
! 1085: write_oldobj=none
! 1086: fi
! 1087:
! 1088: $opt_dry_run || {
! 1089: cat >${write_libobj}T <<EOF
! 1090: # $write_libobj - a libtool object file
! 1091: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 1092: #
! 1093: # Please DO NOT delete this file!
! 1094: # It is necessary for linking the library.
! 1095:
! 1096: # Name of the PIC object.
! 1097: pic_object=$write_lobj
! 1098:
! 1099: # Name of the non-PIC object
! 1100: non_pic_object=$write_oldobj
! 1101:
! 1102: EOF
! 1103: $MV "${write_libobj}T" "${write_libobj}"
! 1104: }
! 1105: }
! 1106:
! 1107: # func_mode_compile arg...
! 1108: func_mode_compile ()
! 1109: {
! 1110: $opt_debug
! 1111: # Get the compilation command and the source file.
! 1112: base_compile=
! 1113: srcfile="$nonopt" # always keep a non-empty value in "srcfile"
! 1114: suppress_opt=yes
! 1115: suppress_output=
! 1116: arg_mode=normal
! 1117: libobj=
! 1118: later=
! 1119: pie_flag=
! 1120:
! 1121: for arg
! 1122: do
! 1123: case $arg_mode in
! 1124: arg )
! 1125: # do not "continue". Instead, add this to base_compile
! 1126: lastarg="$arg"
! 1127: arg_mode=normal
! 1128: ;;
! 1129:
! 1130: target )
! 1131: libobj="$arg"
! 1132: arg_mode=normal
! 1133: continue
! 1134: ;;
! 1135:
! 1136: normal )
! 1137: # Accept any command-line options.
! 1138: case $arg in
! 1139: -o)
! 1140: test -n "$libobj" && \
! 1141: func_fatal_error "you cannot specify \`-o' more than once"
! 1142: arg_mode=target
! 1143: continue
! 1144: ;;
! 1145:
! 1146: -pie | -fpie | -fPIE)
! 1147: pie_flag="$pie_flag $arg"
! 1148: continue
! 1149: ;;
! 1150:
! 1151: -shared | -static | -prefer-pic | -prefer-non-pic)
! 1152: later="$later $arg"
! 1153: continue
! 1154: ;;
! 1155:
! 1156: -no-suppress)
! 1157: suppress_opt=no
! 1158: continue
! 1159: ;;
! 1160:
! 1161: -Xcompiler)
! 1162: arg_mode=arg # the next one goes into the "base_compile" arg list
! 1163: continue # The current "srcfile" will either be retained or
! 1164: ;; # replaced later. I would guess that would be a bug.
! 1165:
! 1166: -Wc,*)
! 1167: func_stripname '-Wc,' '' "$arg"
! 1168: args=$func_stripname_result
! 1169: lastarg=
! 1170: save_ifs="$IFS"; IFS=','
! 1171: for arg in $args; do
! 1172: IFS="$save_ifs"
! 1173: func_quote_for_eval "$arg"
! 1174: lastarg="$lastarg $func_quote_for_eval_result"
! 1175: done
! 1176: IFS="$save_ifs"
! 1177: func_stripname ' ' '' "$lastarg"
! 1178: lastarg=$func_stripname_result
! 1179:
! 1180: # Add the arguments to base_compile.
! 1181: base_compile="$base_compile $lastarg"
! 1182: continue
! 1183: ;;
! 1184:
! 1185: *)
! 1186: # Accept the current argument as the source file.
! 1187: # The previous "srcfile" becomes the current argument.
! 1188: #
! 1189: lastarg="$srcfile"
! 1190: srcfile="$arg"
! 1191: ;;
! 1192: esac # case $arg
! 1193: ;;
! 1194: esac # case $arg_mode
! 1195:
! 1196: # Aesthetically quote the previous argument.
! 1197: func_quote_for_eval "$lastarg"
! 1198: base_compile="$base_compile $func_quote_for_eval_result"
! 1199: done # for arg
! 1200:
! 1201: case $arg_mode in
! 1202: arg)
! 1203: func_fatal_error "you must specify an argument for -Xcompile"
! 1204: ;;
! 1205: target)
! 1206: func_fatal_error "you must specify a target with \`-o'"
! 1207: ;;
! 1208: *)
! 1209: # Get the name of the library object.
! 1210: test -z "$libobj" && {
! 1211: func_basename "$srcfile"
! 1212: libobj="$func_basename_result"
! 1213: }
! 1214: ;;
! 1215: esac
! 1216:
! 1217: # Recognize several different file suffixes.
! 1218: # If the user specifies -o file.o, it is replaced with file.lo
! 1219: case $libobj in
! 1220: *.[cCFSifmso] | \
! 1221: *.ada | *.adb | *.ads | *.asm | \
! 1222: *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
! 1223: *.[fF][09]? | *.for | *.java | *.obj | *.sx)
! 1224: func_xform "$libobj"
! 1225: libobj=$func_xform_result
! 1226: ;;
! 1227: esac
! 1228:
! 1229: case $libobj in
! 1230: *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
! 1231: *)
! 1232: func_fatal_error "cannot determine name of library object from \`$libobj'"
! 1233: ;;
! 1234: esac
! 1235:
! 1236: func_infer_tag $base_compile
! 1237:
! 1238: for arg in $later; do
! 1239: case $arg in
! 1240: -shared)
! 1241: test "$build_libtool_libs" != yes && \
! 1242: func_fatal_configuration "can not build a shared library"
! 1243: build_old_libs=no
! 1244: continue
! 1245: ;;
! 1246:
! 1247: -static)
! 1248: build_libtool_libs=no
! 1249: build_old_libs=yes
! 1250: continue
! 1251: ;;
! 1252:
! 1253: -prefer-pic)
! 1254: pic_mode=yes
! 1255: continue
! 1256: ;;
! 1257:
! 1258: -prefer-non-pic)
! 1259: pic_mode=no
! 1260: continue
! 1261: ;;
! 1262: esac
! 1263: done
! 1264:
! 1265: func_quote_for_eval "$libobj"
! 1266: test "X$libobj" != "X$func_quote_for_eval_result" \
! 1267: && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
! 1268: && func_warning "libobj name \`$libobj' may not contain shell special characters."
! 1269: func_dirname_and_basename "$obj" "/" ""
! 1270: objname="$func_basename_result"
! 1271: xdir="$func_dirname_result"
! 1272: lobj=${xdir}$objdir/$objname
! 1273:
! 1274: test -z "$base_compile" && \
! 1275: func_fatal_help "you must specify a compilation command"
! 1276:
! 1277: # Delete any leftover library objects.
! 1278: if test "$build_old_libs" = yes; then
! 1279: removelist="$obj $lobj $libobj ${libobj}T"
! 1280: else
! 1281: removelist="$lobj $libobj ${libobj}T"
! 1282: fi
! 1283:
! 1284: # On Cygwin there's no "real" PIC flag so we must build both object types
! 1285: case $host_os in
! 1286: cygwin* | mingw* | pw32* | os2* | cegcc*)
! 1287: pic_mode=default
! 1288: ;;
! 1289: esac
! 1290: if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
! 1291: # non-PIC code in shared libraries is not supported
! 1292: pic_mode=default
! 1293: fi
! 1294:
! 1295: # Calculate the filename of the output object if compiler does
! 1296: # not support -o with -c
! 1297: if test "$compiler_c_o" = no; then
! 1298: output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
! 1299: lockfile="$output_obj.lock"
! 1300: else
! 1301: output_obj=
! 1302: need_locks=no
! 1303: lockfile=
! 1304: fi
! 1305:
! 1306: # Lock this critical section if it is needed
! 1307: # We use this script file to make the link, it avoids creating a new file
! 1308: if test "$need_locks" = yes; then
! 1309: until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
! 1310: func_echo "Waiting for $lockfile to be removed"
! 1311: sleep 2
! 1312: done
! 1313: elif test "$need_locks" = warn; then
! 1314: if test -f "$lockfile"; then
! 1315: $ECHO "\
! 1316: *** ERROR, $lockfile exists and contains:
! 1317: `cat $lockfile 2>/dev/null`
! 1318:
! 1319: This indicates that another process is trying to use the same
! 1320: temporary object file, and libtool could not work around it because
! 1321: your compiler does not support \`-c' and \`-o' together. If you
! 1322: repeat this compilation, it may succeed, by chance, but you had better
! 1323: avoid parallel builds (make -j) in this platform, or get a better
! 1324: compiler."
! 1325:
! 1326: $opt_dry_run || $RM $removelist
! 1327: exit $EXIT_FAILURE
! 1328: fi
! 1329: removelist="$removelist $output_obj"
! 1330: $ECHO "$srcfile" > "$lockfile"
! 1331: fi
! 1332:
! 1333: $opt_dry_run || $RM $removelist
! 1334: removelist="$removelist $lockfile"
! 1335: trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
! 1336:
! 1337: if test -n "$fix_srcfile_path"; then
! 1338: eval srcfile=\"$fix_srcfile_path\"
! 1339: fi
! 1340: func_quote_for_eval "$srcfile"
! 1341: qsrcfile=$func_quote_for_eval_result
! 1342:
! 1343: # Only build a PIC object if we are building libtool libraries.
! 1344: if test "$build_libtool_libs" = yes; then
! 1345: # Without this assignment, base_compile gets emptied.
! 1346: fbsd_hideous_sh_bug=$base_compile
! 1347:
! 1348: if test "$pic_mode" != no; then
! 1349: command="$base_compile $qsrcfile $pic_flag"
! 1350: else
! 1351: # Don't build PIC code
! 1352: command="$base_compile $qsrcfile"
! 1353: fi
! 1354:
! 1355: func_mkdir_p "$xdir$objdir"
! 1356:
! 1357: if test -z "$output_obj"; then
! 1358: # Place PIC objects in $objdir
! 1359: command="$command -o $lobj"
! 1360: fi
! 1361:
! 1362: func_show_eval_locale "$command" \
! 1363: 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
! 1364:
! 1365: if test "$need_locks" = warn &&
! 1366: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 1367: $ECHO "\
! 1368: *** ERROR, $lockfile contains:
! 1369: `cat $lockfile 2>/dev/null`
! 1370:
! 1371: but it should contain:
! 1372: $srcfile
! 1373:
! 1374: This indicates that another process is trying to use the same
! 1375: temporary object file, and libtool could not work around it because
! 1376: your compiler does not support \`-c' and \`-o' together. If you
! 1377: repeat this compilation, it may succeed, by chance, but you had better
! 1378: avoid parallel builds (make -j) in this platform, or get a better
! 1379: compiler."
! 1380:
! 1381: $opt_dry_run || $RM $removelist
! 1382: exit $EXIT_FAILURE
! 1383: fi
! 1384:
! 1385: # Just move the object if needed, then go on to compile the next one
! 1386: if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
! 1387: func_show_eval '$MV "$output_obj" "$lobj"' \
! 1388: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 1389: fi
! 1390:
! 1391: # Allow error messages only from the first compilation.
! 1392: if test "$suppress_opt" = yes; then
! 1393: suppress_output=' >/dev/null 2>&1'
! 1394: fi
! 1395: fi
! 1396:
! 1397: # Only build a position-dependent object if we build old libraries.
! 1398: if test "$build_old_libs" = yes; then
! 1399: if test "$pic_mode" != yes; then
! 1400: # Don't build PIC code
! 1401: command="$base_compile $qsrcfile$pie_flag"
! 1402: else
! 1403: command="$base_compile $qsrcfile $pic_flag"
! 1404: fi
! 1405: if test "$compiler_c_o" = yes; then
! 1406: command="$command -o $obj"
! 1407: fi
! 1408:
! 1409: # Suppress compiler output if we already did a PIC compilation.
! 1410: command="$command$suppress_output"
! 1411: func_show_eval_locale "$command" \
! 1412: '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
! 1413:
! 1414: if test "$need_locks" = warn &&
! 1415: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 1416: $ECHO "\
! 1417: *** ERROR, $lockfile contains:
! 1418: `cat $lockfile 2>/dev/null`
! 1419:
! 1420: but it should contain:
! 1421: $srcfile
! 1422:
! 1423: This indicates that another process is trying to use the same
! 1424: temporary object file, and libtool could not work around it because
! 1425: your compiler does not support \`-c' and \`-o' together. If you
! 1426: repeat this compilation, it may succeed, by chance, but you had better
! 1427: avoid parallel builds (make -j) in this platform, or get a better
! 1428: compiler."
! 1429:
! 1430: $opt_dry_run || $RM $removelist
! 1431: exit $EXIT_FAILURE
! 1432: fi
! 1433:
! 1434: # Just move the object if needed
! 1435: if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
! 1436: func_show_eval '$MV "$output_obj" "$obj"' \
! 1437: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 1438: fi
! 1439: fi
! 1440:
! 1441: $opt_dry_run || {
! 1442: func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
! 1443:
! 1444: # Unlock the critical section if it was locked
! 1445: if test "$need_locks" != no; then
! 1446: removelist=$lockfile
! 1447: $RM "$lockfile"
! 1448: fi
! 1449: }
! 1450:
! 1451: exit $EXIT_SUCCESS
! 1452: }
! 1453:
! 1454: $opt_help || {
! 1455: test "$mode" = compile && func_mode_compile ${1+"$@"}
! 1456: }
! 1457:
! 1458: func_mode_help ()
! 1459: {
! 1460: # We need to display help for each of the modes.
! 1461: case $mode in
! 1462: "")
! 1463: # Generic help is extracted from the usage comments
! 1464: # at the start of this file.
! 1465: func_help
! 1466: ;;
! 1467:
! 1468: clean)
! 1469: $ECHO \
! 1470: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
! 1471:
! 1472: Remove files from the build directory.
! 1473:
! 1474: RM is the name of the program to use to delete files associated with each FILE
! 1475: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 1476: to RM.
! 1477:
! 1478: If FILE is a libtool library, object or program, all the files associated
! 1479: with it are deleted. Otherwise, only FILE itself is deleted using RM."
! 1480: ;;
! 1481:
! 1482: compile)
! 1483: $ECHO \
! 1484: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
! 1485:
! 1486: Compile a source file into a libtool library object.
! 1487:
! 1488: This mode accepts the following additional options:
! 1489:
! 1490: -o OUTPUT-FILE set the output file name to OUTPUT-FILE
! 1491: -no-suppress do not suppress compiler output for multiple passes
! 1492: -prefer-pic try to building PIC objects only
! 1493: -prefer-non-pic try to building non-PIC objects only
! 1494: -shared do not build a \`.o' file suitable for static linking
! 1495: -static only build a \`.o' file suitable for static linking
! 1496:
! 1497: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
! 1498: from the given SOURCEFILE.
! 1499:
! 1500: The output file name is determined by removing the directory component from
! 1501: SOURCEFILE, then substituting the C source code suffix \`.c' with the
! 1502: library object suffix, \`.lo'."
! 1503: ;;
! 1504:
! 1505: execute)
! 1506: $ECHO \
! 1507: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
! 1508:
! 1509: Automatically set library path, then run a program.
! 1510:
! 1511: This mode accepts the following additional options:
! 1512:
! 1513: -dlopen FILE add the directory containing FILE to the library path
! 1514:
! 1515: This mode sets the library path environment variable according to \`-dlopen'
! 1516: flags.
! 1517:
! 1518: If any of the ARGS are libtool executable wrappers, then they are translated
! 1519: into their corresponding uninstalled binary, and any of their required library
! 1520: directories are added to the library path.
! 1521:
! 1522: Then, COMMAND is executed, with ARGS as arguments."
! 1523: ;;
! 1524:
! 1525: finish)
! 1526: $ECHO \
! 1527: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
! 1528:
! 1529: Complete the installation of libtool libraries.
! 1530:
! 1531: Each LIBDIR is a directory that contains libtool libraries.
! 1532:
! 1533: The commands that this mode executes may require superuser privileges. Use
! 1534: the \`--dry-run' option if you just want to see what would be executed."
! 1535: ;;
! 1536:
! 1537: install)
! 1538: $ECHO \
! 1539: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
! 1540:
! 1541: Install executables or libraries.
! 1542:
! 1543: INSTALL-COMMAND is the installation command. The first component should be
! 1544: either the \`install' or \`cp' program.
! 1545:
! 1546: The following components of INSTALL-COMMAND are treated specially:
! 1547:
! 1548: -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
! 1549:
! 1550: The rest of the components are interpreted as arguments to that command (only
! 1551: BSD-compatible install options are recognized)."
! 1552: ;;
! 1553:
! 1554: link)
! 1555: $ECHO \
! 1556: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
! 1557:
! 1558: Link object files or libraries together to form another library, or to
! 1559: create an executable program.
! 1560:
! 1561: LINK-COMMAND is a command using the C compiler that you would use to create
! 1562: a program from several object files.
! 1563:
! 1564: The following components of LINK-COMMAND are treated specially:
! 1565:
! 1566: -all-static do not do any dynamic linking at all
! 1567: -avoid-version do not add a version suffix if possible
! 1568: -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
! 1569: -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
! 1570: -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
! 1571: -export-symbols SYMFILE
! 1572: try to export only the symbols listed in SYMFILE
! 1573: -export-symbols-regex REGEX
! 1574: try to export only the symbols matching REGEX
! 1575: -LLIBDIR search LIBDIR for required installed libraries
! 1576: -lNAME OUTPUT-FILE requires the installed library libNAME
! 1577: -module build a library that can dlopened
! 1578: -no-fast-install disable the fast-install mode
! 1579: -no-install link a not-installable executable
! 1580: -no-undefined declare that a library does not refer to external symbols
! 1581: -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
! 1582: -objectlist FILE Use a list of object files found in FILE to specify objects
! 1583: -precious-files-regex REGEX
! 1584: don't remove output files matching REGEX
! 1585: -release RELEASE specify package release information
! 1586: -rpath LIBDIR the created library will eventually be installed in LIBDIR
! 1587: -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
! 1588: -shared only do dynamic linking of libtool libraries
! 1589: -shrext SUFFIX override the standard shared library file extension
! 1590: -static do not do any dynamic linking of uninstalled libtool libraries
! 1591: -static-libtool-libs
! 1592: do not do any dynamic linking of libtool libraries
! 1593: -version-info CURRENT[:REVISION[:AGE]]
! 1594: specify library version info [each variable defaults to 0]
! 1595: -weak LIBNAME declare that the target provides the LIBNAME interface
! 1596:
! 1597: All other options (arguments beginning with \`-') are ignored.
! 1598:
! 1599: Every other argument is treated as a filename. Files ending in \`.la' are
! 1600: treated as uninstalled libtool libraries, other files are standard or library
! 1601: object files.
! 1602:
! 1603: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
! 1604: only library objects (\`.lo' files) may be specified, and \`-rpath' is
! 1605: required, except when creating a convenience library.
! 1606:
! 1607: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
! 1608: using \`ar' and \`ranlib', or on Windows using \`lib'.
! 1609:
! 1610: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
! 1611: is created, otherwise an executable program is created."
! 1612: ;;
! 1613:
! 1614: uninstall)
! 1615: $ECHO \
! 1616: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
! 1617:
! 1618: Remove libraries from an installation directory.
! 1619:
! 1620: RM is the name of the program to use to delete files associated with each FILE
! 1621: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 1622: to RM.
! 1623:
! 1624: If FILE is a libtool library, all the files associated with it are deleted.
! 1625: Otherwise, only FILE itself is deleted using RM."
! 1626: ;;
! 1627:
! 1628: *)
! 1629: func_fatal_help "invalid operation mode \`$mode'"
! 1630: ;;
! 1631: esac
! 1632:
! 1633: $ECHO
! 1634: $ECHO "Try \`$progname --help' for more information about other modes."
! 1635:
! 1636: exit $?
! 1637: }
! 1638:
! 1639: # Now that we've collected a possible --mode arg, show help if necessary
! 1640: $opt_help && func_mode_help
! 1641:
! 1642:
! 1643: # func_mode_execute arg...
! 1644: func_mode_execute ()
! 1645: {
! 1646: $opt_debug
! 1647: # The first argument is the command name.
! 1648: cmd="$nonopt"
! 1649: test -z "$cmd" && \
! 1650: func_fatal_help "you must specify a COMMAND"
! 1651:
! 1652: # Handle -dlopen flags immediately.
! 1653: for file in $execute_dlfiles; do
! 1654: test -f "$file" \
! 1655: || func_fatal_help "\`$file' is not a file"
! 1656:
! 1657: dir=
! 1658: case $file in
! 1659: *.la)
! 1660: # Check to see that this really is a libtool archive.
! 1661: func_lalib_unsafe_p "$file" \
! 1662: || func_fatal_help "\`$lib' is not a valid libtool archive"
! 1663:
! 1664: # Read the libtool library.
! 1665: dlname=
! 1666: library_names=
! 1667: func_source "$file"
! 1668:
! 1669: # Skip this library if it cannot be dlopened.
! 1670: if test -z "$dlname"; then
! 1671: # Warn if it was a shared library.
! 1672: test -n "$library_names" && \
! 1673: func_warning "\`$file' was not linked with \`-export-dynamic'"
! 1674: continue
! 1675: fi
! 1676:
! 1677: func_dirname "$file" "" "."
! 1678: dir="$func_dirname_result"
! 1679:
! 1680: if test -f "$dir/$objdir/$dlname"; then
! 1681: dir="$dir/$objdir"
! 1682: else
! 1683: if test ! -f "$dir/$dlname"; then
! 1684: func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
! 1685: fi
! 1686: fi
! 1687: ;;
! 1688:
! 1689: *.lo)
! 1690: # Just add the directory containing the .lo file.
! 1691: func_dirname "$file" "" "."
! 1692: dir="$func_dirname_result"
! 1693: ;;
! 1694:
! 1695: *)
! 1696: func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
! 1697: continue
! 1698: ;;
! 1699: esac
! 1700:
! 1701: # Get the absolute pathname.
! 1702: absdir=`cd "$dir" && pwd`
! 1703: test -n "$absdir" && dir="$absdir"
! 1704:
! 1705: # Now add the directory to shlibpath_var.
! 1706: if eval "test -z \"\$$shlibpath_var\""; then
! 1707: eval "$shlibpath_var=\"\$dir\""
! 1708: else
! 1709: eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
! 1710: fi
! 1711: done
! 1712:
! 1713: # This variable tells wrapper scripts just to set shlibpath_var
! 1714: # rather than running their programs.
! 1715: libtool_execute_magic="$magic"
! 1716:
! 1717: # Check if any of the arguments is a wrapper script.
! 1718: args=
! 1719: for file
! 1720: do
! 1721: case $file in
! 1722: -*) ;;
! 1723: *)
! 1724: # Do a test to see if this is really a libtool program.
! 1725: if func_ltwrapper_script_p "$file"; then
! 1726: func_source "$file"
! 1727: # Transform arg to wrapped name.
! 1728: file="$progdir/$program"
! 1729: elif func_ltwrapper_executable_p "$file"; then
! 1730: func_ltwrapper_scriptname "$file"
! 1731: func_source "$func_ltwrapper_scriptname_result"
! 1732: # Transform arg to wrapped name.
! 1733: file="$progdir/$program"
! 1734: fi
! 1735: ;;
! 1736: esac
! 1737: # Quote arguments (to preserve shell metacharacters).
! 1738: func_quote_for_eval "$file"
! 1739: args="$args $func_quote_for_eval_result"
! 1740: done
! 1741:
! 1742: if test "X$opt_dry_run" = Xfalse; then
! 1743: if test -n "$shlibpath_var"; then
! 1744: # Export the shlibpath_var.
! 1745: eval "export $shlibpath_var"
! 1746: fi
! 1747:
! 1748: # Restore saved environment variables
! 1749: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 1750: do
! 1751: eval "if test \"\${save_$lt_var+set}\" = set; then
! 1752: $lt_var=\$save_$lt_var; export $lt_var
! 1753: else
! 1754: $lt_unset $lt_var
! 1755: fi"
! 1756: done
! 1757:
! 1758: # Now prepare to actually exec the command.
! 1759: exec_cmd="\$cmd$args"
! 1760: else
! 1761: # Display what would be done.
! 1762: if test -n "$shlibpath_var"; then
! 1763: eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
! 1764: $ECHO "export $shlibpath_var"
! 1765: fi
! 1766: $ECHO "$cmd$args"
! 1767: exit $EXIT_SUCCESS
! 1768: fi
! 1769: }
! 1770:
! 1771: test "$mode" = execute && func_mode_execute ${1+"$@"}
! 1772:
! 1773:
! 1774: # func_mode_finish arg...
! 1775: func_mode_finish ()
! 1776: {
! 1777: $opt_debug
! 1778: libdirs="$nonopt"
! 1779: admincmds=
! 1780:
! 1781: if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
! 1782: for dir
! 1783: do
! 1784: libdirs="$libdirs $dir"
! 1785: done
! 1786:
! 1787: for libdir in $libdirs; do
! 1788: if test -n "$finish_cmds"; then
! 1789: # Do each command in the finish commands.
! 1790: func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
! 1791: '"$cmd"'"'
! 1792: fi
! 1793: if test -n "$finish_eval"; then
! 1794: # Do the single finish_eval.
! 1795: eval cmds=\"$finish_eval\"
! 1796: $opt_dry_run || eval "$cmds" || admincmds="$admincmds
! 1797: $cmds"
! 1798: fi
! 1799: done
! 1800: fi
! 1801:
! 1802: # Exit here if they wanted silent mode.
! 1803: $opt_silent && exit $EXIT_SUCCESS
! 1804:
! 1805: $ECHO "X----------------------------------------------------------------------" | $Xsed
! 1806: $ECHO "Libraries have been installed in:"
! 1807: for libdir in $libdirs; do
! 1808: $ECHO " $libdir"
! 1809: done
! 1810: $ECHO
! 1811: $ECHO "If you ever happen to want to link against installed libraries"
! 1812: $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
! 1813: $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
! 1814: $ECHO "flag during linking and do at least one of the following:"
! 1815: if test -n "$shlibpath_var"; then
! 1816: $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
! 1817: $ECHO " during execution"
! 1818: fi
! 1819: if test -n "$runpath_var"; then
! 1820: $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
! 1821: $ECHO " during linking"
! 1822: fi
! 1823: if test -n "$hardcode_libdir_flag_spec"; then
! 1824: libdir=LIBDIR
! 1825: eval flag=\"$hardcode_libdir_flag_spec\"
! 1826:
! 1827: $ECHO " - use the \`$flag' linker flag"
! 1828: fi
! 1829: if test -n "$admincmds"; then
! 1830: $ECHO " - have your system administrator run these commands:$admincmds"
! 1831: fi
! 1832: if test -f /etc/ld.so.conf; then
! 1833: $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
! 1834: fi
! 1835: $ECHO
! 1836:
! 1837: $ECHO "See any operating system documentation about shared libraries for"
! 1838: case $host in
! 1839: solaris2.[6789]|solaris2.1[0-9])
! 1840: $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
! 1841: $ECHO "pages."
! 1842: ;;
! 1843: *)
! 1844: $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
! 1845: ;;
! 1846: esac
! 1847: $ECHO "X----------------------------------------------------------------------" | $Xsed
! 1848: exit $EXIT_SUCCESS
! 1849: }
! 1850:
! 1851: test "$mode" = finish && func_mode_finish ${1+"$@"}
! 1852:
! 1853:
! 1854: # func_mode_install arg...
! 1855: func_mode_install ()
! 1856: {
! 1857: $opt_debug
! 1858: # There may be an optional sh(1) argument at the beginning of
! 1859: # install_prog (especially on Windows NT).
! 1860: if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
! 1861: # Allow the use of GNU shtool's install command.
! 1862: $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
! 1863: # Aesthetically quote it.
! 1864: func_quote_for_eval "$nonopt"
! 1865: install_prog="$func_quote_for_eval_result "
! 1866: arg=$1
! 1867: shift
! 1868: else
! 1869: install_prog=
! 1870: arg=$nonopt
! 1871: fi
! 1872:
! 1873: # The real first argument should be the name of the installation program.
! 1874: # Aesthetically quote it.
! 1875: func_quote_for_eval "$arg"
! 1876: install_prog="$install_prog$func_quote_for_eval_result"
! 1877:
! 1878: # We need to accept at least all the BSD install flags.
! 1879: dest=
! 1880: files=
! 1881: opts=
! 1882: prev=
! 1883: install_type=
! 1884: isdir=no
! 1885: stripme=
! 1886: for arg
! 1887: do
! 1888: if test -n "$dest"; then
! 1889: files="$files $dest"
! 1890: dest=$arg
! 1891: continue
! 1892: fi
! 1893:
! 1894: case $arg in
! 1895: -d) isdir=yes ;;
! 1896: -f)
! 1897: case " $install_prog " in
! 1898: *[\\\ /]cp\ *) ;;
! 1899: *) prev=$arg ;;
! 1900: esac
! 1901: ;;
! 1902: -g | -m | -o)
! 1903: prev=$arg
! 1904: ;;
! 1905: -s)
! 1906: stripme=" -s"
! 1907: continue
! 1908: ;;
! 1909: -*)
! 1910: ;;
! 1911: *)
! 1912: # If the previous option needed an argument, then skip it.
! 1913: if test -n "$prev"; then
! 1914: prev=
! 1915: else
! 1916: dest=$arg
! 1917: continue
! 1918: fi
! 1919: ;;
! 1920: esac
! 1921:
! 1922: # Aesthetically quote the argument.
! 1923: func_quote_for_eval "$arg"
! 1924: install_prog="$install_prog $func_quote_for_eval_result"
! 1925: done
! 1926:
! 1927: test -z "$install_prog" && \
! 1928: func_fatal_help "you must specify an install program"
! 1929:
! 1930: test -n "$prev" && \
! 1931: func_fatal_help "the \`$prev' option requires an argument"
! 1932:
! 1933: if test -z "$files"; then
! 1934: if test -z "$dest"; then
! 1935: func_fatal_help "no file or destination specified"
! 1936: else
! 1937: func_fatal_help "you must specify a destination"
! 1938: fi
! 1939: fi
! 1940:
! 1941: # Strip any trailing slash from the destination.
! 1942: func_stripname '' '/' "$dest"
! 1943: dest=$func_stripname_result
! 1944:
! 1945: # Check to see that the destination is a directory.
! 1946: test -d "$dest" && isdir=yes
! 1947: if test "$isdir" = yes; then
! 1948: destdir="$dest"
! 1949: destname=
! 1950: else
! 1951: func_dirname_and_basename "$dest" "" "."
! 1952: destdir="$func_dirname_result"
! 1953: destname="$func_basename_result"
! 1954:
! 1955: # Not a directory, so check to see that there is only one file specified.
! 1956: set dummy $files; shift
! 1957: test "$#" -gt 1 && \
! 1958: func_fatal_help "\`$dest' is not a directory"
! 1959: fi
! 1960: case $destdir in
! 1961: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 1962: *)
! 1963: for file in $files; do
! 1964: case $file in
! 1965: *.lo) ;;
! 1966: *)
! 1967: func_fatal_help "\`$destdir' must be an absolute directory name"
! 1968: ;;
! 1969: esac
! 1970: done
! 1971: ;;
! 1972: esac
! 1973:
! 1974: # This variable tells wrapper scripts just to set variables rather
! 1975: # than running their programs.
! 1976: libtool_install_magic="$magic"
! 1977:
! 1978: staticlibs=
! 1979: future_libdirs=
! 1980: current_libdirs=
! 1981: for file in $files; do
! 1982:
! 1983: # Do each installation.
! 1984: case $file in
! 1985: *.$libext)
! 1986: # Do the static libraries later.
! 1987: staticlibs="$staticlibs $file"
! 1988: ;;
! 1989:
! 1990: *.la)
! 1991: # Check to see that this really is a libtool archive.
! 1992: func_lalib_unsafe_p "$file" \
! 1993: || func_fatal_help "\`$file' is not a valid libtool archive"
! 1994:
! 1995: library_names=
! 1996: old_library=
! 1997: relink_command=
! 1998: func_source "$file"
! 1999:
! 2000: # Add the libdir to current_libdirs if it is the destination.
! 2001: if test "X$destdir" = "X$libdir"; then
! 2002: case "$current_libdirs " in
! 2003: *" $libdir "*) ;;
! 2004: *) current_libdirs="$current_libdirs $libdir" ;;
! 2005: esac
! 2006: else
! 2007: # Note the libdir as a future libdir.
! 2008: case "$future_libdirs " in
! 2009: *" $libdir "*) ;;
! 2010: *) future_libdirs="$future_libdirs $libdir" ;;
! 2011: esac
! 2012: fi
! 2013:
! 2014: func_dirname "$file" "/" ""
! 2015: dir="$func_dirname_result"
! 2016: dir="$dir$objdir"
! 2017:
! 2018: if test -n "$relink_command"; then
! 2019: # Determine the prefix the user has applied to our future dir.
! 2020: inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
! 2021:
! 2022: # Don't allow the user to place us outside of our expected
! 2023: # location b/c this prevents finding dependent libraries that
! 2024: # are installed to the same prefix.
! 2025: # At present, this check doesn't affect windows .dll's that
! 2026: # are installed into $libdir/../bin (currently, that works fine)
! 2027: # but it's something to keep an eye on.
! 2028: test "$inst_prefix_dir" = "$destdir" && \
! 2029: func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
! 2030:
! 2031: if test -n "$inst_prefix_dir"; then
! 2032: # Stick the inst_prefix_dir data into the link command.
! 2033: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
! 2034: else
! 2035: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
! 2036: fi
! 2037:
! 2038: func_warning "relinking \`$file'"
! 2039: func_show_eval "$relink_command" \
! 2040: 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
! 2041: fi
! 2042:
! 2043: # See the names of the shared library.
! 2044: set dummy $library_names; shift
! 2045: if test -n "$1"; then
! 2046: realname="$1"
! 2047: shift
! 2048:
! 2049: srcname="$realname"
! 2050: test -n "$relink_command" && srcname="$realname"T
! 2051:
! 2052: # Install the shared library and build the symlinks.
! 2053: func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
! 2054: 'exit $?'
! 2055: tstripme="$stripme"
! 2056: case $host_os in
! 2057: cygwin* | mingw* | pw32* | cegcc*)
! 2058: case $realname in
! 2059: *.dll.a)
! 2060: tstripme=""
! 2061: ;;
! 2062: esac
! 2063: ;;
! 2064: esac
! 2065: if test -n "$tstripme" && test -n "$striplib"; then
! 2066: func_show_eval "$striplib $destdir/$realname" 'exit $?'
! 2067: fi
! 2068:
! 2069: if test "$#" -gt 0; then
! 2070: # Delete the old symlinks, and create new ones.
! 2071: # Try `ln -sf' first, because the `ln' binary might depend on
! 2072: # the symlink we replace! Solaris /bin/ln does not understand -f,
! 2073: # so we also need to try rm && ln -s.
! 2074: for linkname
! 2075: do
! 2076: test "$linkname" != "$realname" \
! 2077: && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
! 2078: done
! 2079: fi
! 2080:
! 2081: # Do each command in the postinstall commands.
! 2082: lib="$destdir/$realname"
! 2083: func_execute_cmds "$postinstall_cmds" 'exit $?'
! 2084: fi
! 2085:
! 2086: # Install the pseudo-library for information purposes.
! 2087: func_basename "$file"
! 2088: name="$func_basename_result"
! 2089: instname="$dir/$name"i
! 2090: func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
! 2091:
! 2092: # Maybe install the static library, too.
! 2093: test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
! 2094: ;;
! 2095:
! 2096: *.lo)
! 2097: # Install (i.e. copy) a libtool object.
! 2098:
! 2099: # Figure out destination file name, if it wasn't already specified.
! 2100: if test -n "$destname"; then
! 2101: destfile="$destdir/$destname"
! 2102: else
! 2103: func_basename "$file"
! 2104: destfile="$func_basename_result"
! 2105: destfile="$destdir/$destfile"
! 2106: fi
! 2107:
! 2108: # Deduce the name of the destination old-style object file.
! 2109: case $destfile in
! 2110: *.lo)
! 2111: func_lo2o "$destfile"
! 2112: staticdest=$func_lo2o_result
! 2113: ;;
! 2114: *.$objext)
! 2115: staticdest="$destfile"
! 2116: destfile=
! 2117: ;;
! 2118: *)
! 2119: func_fatal_help "cannot copy a libtool object to \`$destfile'"
! 2120: ;;
! 2121: esac
! 2122:
! 2123: # Install the libtool object if requested.
! 2124: test -n "$destfile" && \
! 2125: func_show_eval "$install_prog $file $destfile" 'exit $?'
! 2126:
! 2127: # Install the old object if enabled.
! 2128: if test "$build_old_libs" = yes; then
! 2129: # Deduce the name of the old-style object file.
! 2130: func_lo2o "$file"
! 2131: staticobj=$func_lo2o_result
! 2132: func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
! 2133: fi
! 2134: exit $EXIT_SUCCESS
! 2135: ;;
! 2136:
! 2137: *)
! 2138: # Figure out destination file name, if it wasn't already specified.
! 2139: if test -n "$destname"; then
! 2140: destfile="$destdir/$destname"
! 2141: else
! 2142: func_basename "$file"
! 2143: destfile="$func_basename_result"
! 2144: destfile="$destdir/$destfile"
! 2145: fi
! 2146:
! 2147: # If the file is missing, and there is a .exe on the end, strip it
! 2148: # because it is most likely a libtool script we actually want to
! 2149: # install
! 2150: stripped_ext=""
! 2151: case $file in
! 2152: *.exe)
! 2153: if test ! -f "$file"; then
! 2154: func_stripname '' '.exe' "$file"
! 2155: file=$func_stripname_result
! 2156: stripped_ext=".exe"
! 2157: fi
! 2158: ;;
! 2159: esac
! 2160:
! 2161: # Do a test to see if this is really a libtool program.
! 2162: case $host in
! 2163: *cygwin* | *mingw*)
! 2164: if func_ltwrapper_executable_p "$file"; then
! 2165: func_ltwrapper_scriptname "$file"
! 2166: wrapper=$func_ltwrapper_scriptname_result
! 2167: else
! 2168: func_stripname '' '.exe' "$file"
! 2169: wrapper=$func_stripname_result
! 2170: fi
! 2171: ;;
! 2172: *)
! 2173: wrapper=$file
! 2174: ;;
! 2175: esac
! 2176: if func_ltwrapper_script_p "$wrapper"; then
! 2177: notinst_deplibs=
! 2178: relink_command=
! 2179:
! 2180: func_source "$wrapper"
! 2181:
! 2182: # Check the variables that should have been set.
! 2183: test -z "$generated_by_libtool_version" && \
! 2184: func_fatal_error "invalid libtool wrapper script \`$wrapper'"
! 2185:
! 2186: finalize=yes
! 2187: for lib in $notinst_deplibs; do
! 2188: # Check to see that each library is installed.
! 2189: libdir=
! 2190: if test -f "$lib"; then
! 2191: func_source "$lib"
! 2192: fi
! 2193: libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
! 2194: if test -n "$libdir" && test ! -f "$libfile"; then
! 2195: func_warning "\`$lib' has not been installed in \`$libdir'"
! 2196: finalize=no
! 2197: fi
! 2198: done
! 2199:
! 2200: relink_command=
! 2201: func_source "$wrapper"
! 2202:
! 2203: outputname=
! 2204: if test "$fast_install" = no && test -n "$relink_command"; then
! 2205: $opt_dry_run || {
! 2206: if test "$finalize" = yes; then
! 2207: tmpdir=`func_mktempdir`
! 2208: func_basename "$file$stripped_ext"
! 2209: file="$func_basename_result"
! 2210: outputname="$tmpdir/$file"
! 2211: # Replace the output file specification.
! 2212: relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
! 2213:
! 2214: $opt_silent || {
! 2215: func_quote_for_expand "$relink_command"
! 2216: eval "func_echo $func_quote_for_expand_result"
! 2217: }
! 2218: if eval "$relink_command"; then :
! 2219: else
! 2220: func_error "error: relink \`$file' with the above command before installing it"
! 2221: $opt_dry_run || ${RM}r "$tmpdir"
! 2222: continue
! 2223: fi
! 2224: file="$outputname"
! 2225: else
! 2226: func_warning "cannot relink \`$file'"
! 2227: fi
! 2228: }
! 2229: else
! 2230: # Install the binary that we compiled earlier.
! 2231: file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
! 2232: fi
! 2233: fi
! 2234:
! 2235: # remove .exe since cygwin /usr/bin/install will append another
! 2236: # one anyway
! 2237: case $install_prog,$host in
! 2238: */usr/bin/install*,*cygwin*)
! 2239: case $file:$destfile in
! 2240: *.exe:*.exe)
! 2241: # this is ok
! 2242: ;;
! 2243: *.exe:*)
! 2244: destfile=$destfile.exe
! 2245: ;;
! 2246: *:*.exe)
! 2247: func_stripname '' '.exe' "$destfile"
! 2248: destfile=$func_stripname_result
! 2249: ;;
! 2250: esac
! 2251: ;;
! 2252: esac
! 2253: func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
! 2254: $opt_dry_run || if test -n "$outputname"; then
! 2255: ${RM}r "$tmpdir"
! 2256: fi
! 2257: ;;
! 2258: esac
! 2259: done
! 2260:
! 2261: for file in $staticlibs; do
! 2262: func_basename "$file"
! 2263: name="$func_basename_result"
! 2264:
! 2265: # Set up the ranlib parameters.
! 2266: oldlib="$destdir/$name"
! 2267:
! 2268: func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
! 2269:
! 2270: if test -n "$stripme" && test -n "$old_striplib"; then
! 2271: func_show_eval "$old_striplib $oldlib" 'exit $?'
! 2272: fi
! 2273:
! 2274: # Do each command in the postinstall commands.
! 2275: func_execute_cmds "$old_postinstall_cmds" 'exit $?'
! 2276: done
! 2277:
! 2278: test -n "$future_libdirs" && \
! 2279: func_warning "remember to run \`$progname --finish$future_libdirs'"
! 2280:
! 2281: if test -n "$current_libdirs"; then
! 2282: # Maybe just do a dry run.
! 2283: $opt_dry_run && current_libdirs=" -n$current_libdirs"
! 2284: exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
! 2285: else
! 2286: exit $EXIT_SUCCESS
! 2287: fi
! 2288: }
! 2289:
! 2290: test "$mode" = install && func_mode_install ${1+"$@"}
! 2291:
! 2292:
! 2293: # func_generate_dlsyms outputname originator pic_p
! 2294: # Extract symbols from dlprefiles and create ${outputname}S.o with
! 2295: # a dlpreopen symbol table.
! 2296: func_generate_dlsyms ()
! 2297: {
! 2298: $opt_debug
! 2299: my_outputname="$1"
! 2300: my_originator="$2"
! 2301: my_pic_p="${3-no}"
! 2302: my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
! 2303: my_dlsyms=
! 2304:
! 2305: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 2306: if test -n "$NM" && test -n "$global_symbol_pipe"; then
! 2307: my_dlsyms="${my_outputname}S.c"
! 2308: else
! 2309: func_error "not configured to extract global symbols from dlpreopened files"
! 2310: fi
! 2311: fi
! 2312:
! 2313: if test -n "$my_dlsyms"; then
! 2314: case $my_dlsyms in
! 2315: "") ;;
! 2316: *.c)
! 2317: # Discover the nlist of each of the dlfiles.
! 2318: nlist="$output_objdir/${my_outputname}.nm"
! 2319:
! 2320: func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
! 2321:
! 2322: # Parse the name list into a source file.
! 2323: func_verbose "creating $output_objdir/$my_dlsyms"
! 2324:
! 2325: $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
! 2326: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
! 2327: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
! 2328:
! 2329: #ifdef __cplusplus
! 2330: extern \"C\" {
! 2331: #endif
! 2332:
! 2333: /* External symbol declarations for the compiler. */\
! 2334: "
! 2335:
! 2336: if test "$dlself" = yes; then
! 2337: func_verbose "generating symbol list for \`$output'"
! 2338:
! 2339: $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
! 2340:
! 2341: # Add our own program objects to the symbol list.
! 2342: progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 2343: for progfile in $progfiles; do
! 2344: func_verbose "extracting global C symbols from \`$progfile'"
! 2345: $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
! 2346: done
! 2347:
! 2348: if test -n "$exclude_expsyms"; then
! 2349: $opt_dry_run || {
! 2350: eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
! 2351: eval '$MV "$nlist"T "$nlist"'
! 2352: }
! 2353: fi
! 2354:
! 2355: if test -n "$export_symbols_regex"; then
! 2356: $opt_dry_run || {
! 2357: eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
! 2358: eval '$MV "$nlist"T "$nlist"'
! 2359: }
! 2360: fi
! 2361:
! 2362: # Prepare the list of exported symbols
! 2363: if test -z "$export_symbols"; then
! 2364: export_symbols="$output_objdir/$outputname.exp"
! 2365: $opt_dry_run || {
! 2366: $RM $export_symbols
! 2367: eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
! 2368: case $host in
! 2369: *cygwin* | *mingw* | *cegcc* )
! 2370: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 2371: eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
! 2372: ;;
! 2373: esac
! 2374: }
! 2375: else
! 2376: $opt_dry_run || {
! 2377: eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
! 2378: eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
! 2379: eval '$MV "$nlist"T "$nlist"'
! 2380: case $host in
! 2381: *cygwin | *mingw* | *cegcc* )
! 2382: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 2383: eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
! 2384: ;;
! 2385: esac
! 2386: }
! 2387: fi
! 2388: fi
! 2389:
! 2390: for dlprefile in $dlprefiles; do
! 2391: func_verbose "extracting global C symbols from \`$dlprefile'"
! 2392: func_basename "$dlprefile"
! 2393: name="$func_basename_result"
! 2394: $opt_dry_run || {
! 2395: eval '$ECHO ": $name " >> "$nlist"'
! 2396: eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
! 2397: }
! 2398: done
! 2399:
! 2400: $opt_dry_run || {
! 2401: # Make sure we have at least an empty file.
! 2402: test -f "$nlist" || : > "$nlist"
! 2403:
! 2404: if test -n "$exclude_expsyms"; then
! 2405: $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
! 2406: $MV "$nlist"T "$nlist"
! 2407: fi
! 2408:
! 2409: # Try sorting and uniquifying the output.
! 2410: if $GREP -v "^: " < "$nlist" |
! 2411: if sort -k 3 </dev/null >/dev/null 2>&1; then
! 2412: sort -k 3
! 2413: else
! 2414: sort +2
! 2415: fi |
! 2416: uniq > "$nlist"S; then
! 2417: :
! 2418: else
! 2419: $GREP -v "^: " < "$nlist" > "$nlist"S
! 2420: fi
! 2421:
! 2422: if test -f "$nlist"S; then
! 2423: eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
! 2424: else
! 2425: $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
! 2426: fi
! 2427:
! 2428: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2429:
! 2430: /* The mapping between symbol names and symbols. */
! 2431: typedef struct {
! 2432: const char *name;
! 2433: void *address;
! 2434: } lt_dlsymlist;
! 2435: "
! 2436: case $host in
! 2437: *cygwin* | *mingw* | *cegcc* )
! 2438: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2439: /* DATA imports from DLLs on WIN32 con't be const, because
! 2440: runtime relocations are performed -- see ld's documentation
! 2441: on pseudo-relocs. */"
! 2442: lt_dlsym_const= ;;
! 2443: *osf5*)
! 2444: echo >> "$output_objdir/$my_dlsyms" "\
! 2445: /* This system does not cope well with relocations in const data */"
! 2446: lt_dlsym_const= ;;
! 2447: *)
! 2448: lt_dlsym_const=const ;;
! 2449: esac
! 2450:
! 2451: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2452: extern $lt_dlsym_const lt_dlsymlist
! 2453: lt_${my_prefix}_LTX_preloaded_symbols[];
! 2454: $lt_dlsym_const lt_dlsymlist
! 2455: lt_${my_prefix}_LTX_preloaded_symbols[] =
! 2456: {\
! 2457: { \"$my_originator\", (void *) 0 },"
! 2458:
! 2459: case $need_lib_prefix in
! 2460: no)
! 2461: eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 2462: ;;
! 2463: *)
! 2464: eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 2465: ;;
! 2466: esac
! 2467: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2468: {0, (void *) 0}
! 2469: };
! 2470:
! 2471: /* This works around a problem in FreeBSD linker */
! 2472: #ifdef FREEBSD_WORKAROUND
! 2473: static const void *lt_preloaded_setup() {
! 2474: return lt_${my_prefix}_LTX_preloaded_symbols;
! 2475: }
! 2476: #endif
! 2477:
! 2478: #ifdef __cplusplus
! 2479: }
! 2480: #endif\
! 2481: "
! 2482: } # !$opt_dry_run
! 2483:
! 2484: pic_flag_for_symtable=
! 2485: case "$compile_command " in
! 2486: *" -static "*) ;;
! 2487: *)
! 2488: case $host in
! 2489: # compiling the symbol table file with pic_flag works around
! 2490: # a FreeBSD bug that causes programs to crash when -lm is
! 2491: # linked before any other PIC object. But we must not use
! 2492: # pic_flag when linking with -static. The problem exists in
! 2493: # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
! 2494: *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
! 2495: pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
! 2496: *-*-hpux*)
! 2497: pic_flag_for_symtable=" $pic_flag" ;;
! 2498: *)
! 2499: if test "X$my_pic_p" != Xno; then
! 2500: pic_flag_for_symtable=" $pic_flag"
! 2501: fi
! 2502: ;;
! 2503: esac
! 2504: ;;
! 2505: esac
! 2506: symtab_cflags=
! 2507: for arg in $LTCFLAGS; do
! 2508: case $arg in
! 2509: -pie | -fpie | -fPIE) ;;
! 2510: *) symtab_cflags="$symtab_cflags $arg" ;;
! 2511: esac
! 2512: done
! 2513:
! 2514: # Now compile the dynamic symbol file.
! 2515: func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
! 2516:
! 2517: # Clean up the generated files.
! 2518: func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
! 2519:
! 2520: # Transform the symbol file into the correct name.
! 2521: symfileobj="$output_objdir/${my_outputname}S.$objext"
! 2522: case $host in
! 2523: *cygwin* | *mingw* | *cegcc* )
! 2524: if test -f "$output_objdir/$my_outputname.def"; then
! 2525: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 2526: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 2527: else
! 2528: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2529: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2530: fi
! 2531: ;;
! 2532: *)
! 2533: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2534: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2535: ;;
! 2536: esac
! 2537: ;;
! 2538: *)
! 2539: func_fatal_error "unknown suffix for \`$my_dlsyms'"
! 2540: ;;
! 2541: esac
! 2542: else
! 2543: # We keep going just in case the user didn't refer to
! 2544: # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
! 2545: # really was required.
! 2546:
! 2547: # Nullify the symbol file.
! 2548: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
! 2549: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
! 2550: fi
! 2551: }
! 2552:
! 2553: # func_win32_libid arg
! 2554: # return the library type of file 'arg'
! 2555: #
! 2556: # Need a lot of goo to handle *both* DLLs and import libs
! 2557: # Has to be a shell function in order to 'eat' the argument
! 2558: # that is supplied when $file_magic_command is called.
! 2559: func_win32_libid ()
! 2560: {
! 2561: $opt_debug
! 2562: win32_libid_type="unknown"
! 2563: win32_fileres=`file -L $1 2>/dev/null`
! 2564: case $win32_fileres in
! 2565: *ar\ archive\ import\ library*) # definitely import
! 2566: win32_libid_type="x86 archive import"
! 2567: ;;
! 2568: *ar\ archive*) # could be an import, or static
! 2569: if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
! 2570: $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
! 2571: win32_nmres=`eval $NM -f posix -A $1 |
! 2572: $SED -n -e '
! 2573: 1,100{
! 2574: / I /{
! 2575: s,.*,import,
! 2576: p
! 2577: q
! 2578: }
! 2579: }'`
! 2580: case $win32_nmres in
! 2581: import*) win32_libid_type="x86 archive import";;
! 2582: *) win32_libid_type="x86 archive static";;
! 2583: esac
! 2584: fi
! 2585: ;;
! 2586: *DLL*)
! 2587: win32_libid_type="x86 DLL"
! 2588: ;;
! 2589: *executable*) # but shell scripts are "executable" too...
! 2590: case $win32_fileres in
! 2591: *MS\ Windows\ PE\ Intel*)
! 2592: win32_libid_type="x86 DLL"
! 2593: ;;
! 2594: esac
! 2595: ;;
! 2596: esac
! 2597: $ECHO "$win32_libid_type"
! 2598: }
! 2599:
! 2600:
! 2601:
! 2602: # func_extract_an_archive dir oldlib
! 2603: func_extract_an_archive ()
! 2604: {
! 2605: $opt_debug
! 2606: f_ex_an_ar_dir="$1"; shift
! 2607: f_ex_an_ar_oldlib="$1"
! 2608: func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
! 2609: if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
! 2610: :
! 2611: else
! 2612: func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
! 2613: fi
! 2614: }
! 2615:
! 2616:
! 2617: # func_extract_archives gentop oldlib ...
! 2618: func_extract_archives ()
! 2619: {
! 2620: $opt_debug
! 2621: my_gentop="$1"; shift
! 2622: my_oldlibs=${1+"$@"}
! 2623: my_oldobjs=""
! 2624: my_xlib=""
! 2625: my_xabs=""
! 2626: my_xdir=""
! 2627:
! 2628: for my_xlib in $my_oldlibs; do
! 2629: # Extract the objects.
! 2630: case $my_xlib in
! 2631: [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
! 2632: *) my_xabs=`pwd`"/$my_xlib" ;;
! 2633: esac
! 2634: func_basename "$my_xlib"
! 2635: my_xlib="$func_basename_result"
! 2636: my_xlib_u=$my_xlib
! 2637: while :; do
! 2638: case " $extracted_archives " in
! 2639: *" $my_xlib_u "*)
! 2640: func_arith $extracted_serial + 1
! 2641: extracted_serial=$func_arith_result
! 2642: my_xlib_u=lt$extracted_serial-$my_xlib ;;
! 2643: *) break ;;
! 2644: esac
! 2645: done
! 2646: extracted_archives="$extracted_archives $my_xlib_u"
! 2647: my_xdir="$my_gentop/$my_xlib_u"
! 2648:
! 2649: func_mkdir_p "$my_xdir"
! 2650:
! 2651: case $host in
! 2652: *-darwin*)
! 2653: func_verbose "Extracting $my_xabs"
! 2654: # Do not bother doing anything if just a dry run
! 2655: $opt_dry_run || {
! 2656: darwin_orig_dir=`pwd`
! 2657: cd $my_xdir || exit $?
! 2658: darwin_archive=$my_xabs
! 2659: darwin_curdir=`pwd`
! 2660: darwin_base_archive=`basename "$darwin_archive"`
! 2661: darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
! 2662: if test -n "$darwin_arches"; then
! 2663: darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
! 2664: darwin_arch=
! 2665: func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
! 2666: for darwin_arch in $darwin_arches ; do
! 2667: func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 2668: $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
! 2669: cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 2670: func_extract_an_archive "`pwd`" "${darwin_base_archive}"
! 2671: cd "$darwin_curdir"
! 2672: $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
! 2673: done # $darwin_arches
! 2674: ## Okay now we've a bunch of thin objects, gotta fatten them up :)
! 2675: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
! 2676: darwin_file=
! 2677: darwin_files=
! 2678: for darwin_file in $darwin_filelist; do
! 2679: darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
! 2680: $LIPO -create -output "$darwin_file" $darwin_files
! 2681: done # $darwin_filelist
! 2682: $RM -rf unfat-$$
! 2683: cd "$darwin_orig_dir"
! 2684: else
! 2685: cd $darwin_orig_dir
! 2686: func_extract_an_archive "$my_xdir" "$my_xabs"
! 2687: fi # $darwin_arches
! 2688: } # !$opt_dry_run
! 2689: ;;
! 2690: *)
! 2691: func_extract_an_archive "$my_xdir" "$my_xabs"
! 2692: ;;
! 2693: esac
! 2694: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
! 2695: done
! 2696:
! 2697: func_extract_archives_result="$my_oldobjs"
! 2698: }
! 2699:
! 2700:
! 2701:
! 2702: # func_emit_wrapper_part1 [arg=no]
! 2703: #
! 2704: # Emit the first part of a libtool wrapper script on stdout.
! 2705: # For more information, see the description associated with
! 2706: # func_emit_wrapper(), below.
! 2707: func_emit_wrapper_part1 ()
! 2708: {
! 2709: func_emit_wrapper_part1_arg1=no
! 2710: if test -n "$1" ; then
! 2711: func_emit_wrapper_part1_arg1=$1
! 2712: fi
! 2713:
! 2714: $ECHO "\
! 2715: #! $SHELL
! 2716:
! 2717: # $output - temporary wrapper script for $objdir/$outputname
! 2718: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 2719: #
! 2720: # The $output program cannot be directly executed until all the libtool
! 2721: # libraries that it depends on are installed.
! 2722: #
! 2723: # This wrapper script should never be moved out of the build directory.
! 2724: # If it is, it will not operate correctly.
! 2725:
! 2726: # Sed substitution that helps us do robust quoting. It backslashifies
! 2727: # metacharacters that are still active within double-quoted strings.
! 2728: Xsed='${SED} -e 1s/^X//'
! 2729: sed_quote_subst='$sed_quote_subst'
! 2730:
! 2731: # Be Bourne compatible
! 2732: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
! 2733: emulate sh
! 2734: NULLCMD=:
! 2735: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
! 2736: # is contrary to our usage. Disable this feature.
! 2737: alias -g '\${1+\"\$@\"}'='\"\$@\"'
! 2738: setopt NO_GLOB_SUBST
! 2739: else
! 2740: case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
! 2741: fi
! 2742: BIN_SH=xpg4; export BIN_SH # for Tru64
! 2743: DUALCASE=1; export DUALCASE # for MKS sh
! 2744:
! 2745: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 2746: # if CDPATH is set.
! 2747: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 2748:
! 2749: relink_command=\"$relink_command\"
! 2750:
! 2751: # This environment variable determines our operation mode.
! 2752: if test \"\$libtool_install_magic\" = \"$magic\"; then
! 2753: # install mode needs the following variables:
! 2754: generated_by_libtool_version='$macro_version'
! 2755: notinst_deplibs='$notinst_deplibs'
! 2756: else
! 2757: # When we are sourced in execute mode, \$file and \$ECHO are already set.
! 2758: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 2759: ECHO=\"$qecho\"
! 2760: file=\"\$0\"
! 2761: # Make sure echo works.
! 2762: if test \"X\$1\" = X--no-reexec; then
! 2763: # Discard the --no-reexec flag, and continue.
! 2764: shift
! 2765: elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
! 2766: # Yippee, \$ECHO works!
! 2767: :
! 2768: else
! 2769: # Restart under the correct shell, and then maybe \$ECHO will work.
! 2770: exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
! 2771: fi
! 2772: fi\
! 2773: "
! 2774: $ECHO "\
! 2775:
! 2776: # Find the directory that this script lives in.
! 2777: thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
! 2778: test \"x\$thisdir\" = \"x\$file\" && thisdir=.
! 2779:
! 2780: # Follow symbolic links until we get to the real thisdir.
! 2781: file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
! 2782: while test -n \"\$file\"; do
! 2783: destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
! 2784:
! 2785: # If there was a directory component, then change thisdir.
! 2786: if test \"x\$destdir\" != \"x\$file\"; then
! 2787: case \"\$destdir\" in
! 2788: [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
! 2789: *) thisdir=\"\$thisdir/\$destdir\" ;;
! 2790: esac
! 2791: fi
! 2792:
! 2793: file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
! 2794: file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
! 2795: done
! 2796: "
! 2797: }
! 2798: # end: func_emit_wrapper_part1
! 2799:
! 2800: # func_emit_wrapper_part2 [arg=no]
! 2801: #
! 2802: # Emit the second part of a libtool wrapper script on stdout.
! 2803: # For more information, see the description associated with
! 2804: # func_emit_wrapper(), below.
! 2805: func_emit_wrapper_part2 ()
! 2806: {
! 2807: func_emit_wrapper_part2_arg1=no
! 2808: if test -n "$1" ; then
! 2809: func_emit_wrapper_part2_arg1=$1
! 2810: fi
! 2811:
! 2812: $ECHO "\
! 2813:
! 2814: # Usually 'no', except on cygwin/mingw when embedded into
! 2815: # the cwrapper.
! 2816: WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
! 2817: if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
! 2818: # special case for '.'
! 2819: if test \"\$thisdir\" = \".\"; then
! 2820: thisdir=\`pwd\`
! 2821: fi
! 2822: # remove .libs from thisdir
! 2823: case \"\$thisdir\" in
! 2824: *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
! 2825: $objdir ) thisdir=. ;;
! 2826: esac
! 2827: fi
! 2828:
! 2829: # Try to get the absolute directory name.
! 2830: absdir=\`cd \"\$thisdir\" && pwd\`
! 2831: test -n \"\$absdir\" && thisdir=\"\$absdir\"
! 2832: "
! 2833:
! 2834: if test "$fast_install" = yes; then
! 2835: $ECHO "\
! 2836: program=lt-'$outputname'$exeext
! 2837: progdir=\"\$thisdir/$objdir\"
! 2838:
! 2839: if test ! -f \"\$progdir/\$program\" ||
! 2840: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
! 2841: test \"X\$file\" != \"X\$progdir/\$program\"; }; then
! 2842:
! 2843: file=\"\$\$-\$program\"
! 2844:
! 2845: if test ! -d \"\$progdir\"; then
! 2846: $MKDIR \"\$progdir\"
! 2847: else
! 2848: $RM \"\$progdir/\$file\"
! 2849: fi"
! 2850:
! 2851: $ECHO "\
! 2852:
! 2853: # relink executable if necessary
! 2854: if test -n \"\$relink_command\"; then
! 2855: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
! 2856: else
! 2857: $ECHO \"\$relink_command_output\" >&2
! 2858: $RM \"\$progdir/\$file\"
! 2859: exit 1
! 2860: fi
! 2861: fi
! 2862:
! 2863: $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
! 2864: { $RM \"\$progdir/\$program\";
! 2865: $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
! 2866: $RM \"\$progdir/\$file\"
! 2867: fi"
! 2868: else
! 2869: $ECHO "\
! 2870: program='$outputname'
! 2871: progdir=\"\$thisdir/$objdir\"
! 2872: "
! 2873: fi
! 2874:
! 2875: $ECHO "\
! 2876:
! 2877: if test -f \"\$progdir/\$program\"; then"
! 2878:
! 2879: # Export our shlibpath_var if we have one.
! 2880: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 2881: $ECHO "\
! 2882: # Add our own library path to $shlibpath_var
! 2883: $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
! 2884:
! 2885: # Some systems cannot cope with colon-terminated $shlibpath_var
! 2886: # The second colon is a workaround for a bug in BeOS R4 sed
! 2887: $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
! 2888:
! 2889: export $shlibpath_var
! 2890: "
! 2891: fi
! 2892:
! 2893: # fixup the dll searchpath if we need to.
! 2894: if test -n "$dllsearchpath"; then
! 2895: $ECHO "\
! 2896: # Add the dll search path components to the executable PATH
! 2897: PATH=$dllsearchpath:\$PATH
! 2898: "
! 2899: fi
! 2900:
! 2901: $ECHO "\
! 2902: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 2903: # Run the actual program with our arguments.
! 2904: "
! 2905: case $host in
! 2906: # Backslashes separate directories on plain windows
! 2907: *-*-mingw | *-*-os2* | *-cegcc*)
! 2908: $ECHO "\
! 2909: exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
! 2910: "
! 2911: ;;
! 2912:
! 2913: *)
! 2914: $ECHO "\
! 2915: exec \"\$progdir/\$program\" \${1+\"\$@\"}
! 2916: "
! 2917: ;;
! 2918: esac
! 2919: $ECHO "\
! 2920: \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
! 2921: exit 1
! 2922: fi
! 2923: else
! 2924: # The program doesn't exist.
! 2925: \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
! 2926: \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
! 2927: $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
! 2928: exit 1
! 2929: fi
! 2930: fi\
! 2931: "
! 2932: }
! 2933: # end: func_emit_wrapper_part2
! 2934:
! 2935:
! 2936: # func_emit_wrapper [arg=no]
! 2937: #
! 2938: # Emit a libtool wrapper script on stdout.
! 2939: # Don't directly open a file because we may want to
! 2940: # incorporate the script contents within a cygwin/mingw
! 2941: # wrapper executable. Must ONLY be called from within
! 2942: # func_mode_link because it depends on a number of variables
! 2943: # set therein.
! 2944: #
! 2945: # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
! 2946: # variable will take. If 'yes', then the emitted script
! 2947: # will assume that the directory in which it is stored is
! 2948: # the $objdir directory. This is a cygwin/mingw-specific
! 2949: # behavior.
! 2950: func_emit_wrapper ()
! 2951: {
! 2952: func_emit_wrapper_arg1=no
! 2953: if test -n "$1" ; then
! 2954: func_emit_wrapper_arg1=$1
! 2955: fi
! 2956:
! 2957: # split this up so that func_emit_cwrapperexe_src
! 2958: # can call each part independently.
! 2959: func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
! 2960: func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
! 2961: }
! 2962:
! 2963:
! 2964: # func_to_host_path arg
! 2965: #
! 2966: # Convert paths to host format when used with build tools.
! 2967: # Intended for use with "native" mingw (where libtool itself
! 2968: # is running under the msys shell), or in the following cross-
! 2969: # build environments:
! 2970: # $build $host
! 2971: # mingw (msys) mingw [e.g. native]
! 2972: # cygwin mingw
! 2973: # *nix + wine mingw
! 2974: # where wine is equipped with the `winepath' executable.
! 2975: # In the native mingw case, the (msys) shell automatically
! 2976: # converts paths for any non-msys applications it launches,
! 2977: # but that facility isn't available from inside the cwrapper.
! 2978: # Similar accommodations are necessary for $host mingw and
! 2979: # $build cygwin. Calling this function does no harm for other
! 2980: # $host/$build combinations not listed above.
! 2981: #
! 2982: # ARG is the path (on $build) that should be converted to
! 2983: # the proper representation for $host. The result is stored
! 2984: # in $func_to_host_path_result.
! 2985: func_to_host_path ()
! 2986: {
! 2987: func_to_host_path_result="$1"
! 2988: if test -n "$1" ; then
! 2989: case $host in
! 2990: *mingw* )
! 2991: lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
! 2992: case $build in
! 2993: *mingw* ) # actually, msys
! 2994: # awkward: cmd appends spaces to result
! 2995: lt_sed_strip_trailing_spaces="s/[ ]*\$//"
! 2996: func_to_host_path_tmp1=`( cmd //c echo "$1" |\
! 2997: $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
! 2998: func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
! 2999: $SED -e "$lt_sed_naive_backslashify"`
! 3000: ;;
! 3001: *cygwin* )
! 3002: func_to_host_path_tmp1=`cygpath -w "$1"`
! 3003: func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
! 3004: $SED -e "$lt_sed_naive_backslashify"`
! 3005: ;;
! 3006: * )
! 3007: # Unfortunately, winepath does not exit with a non-zero
! 3008: # error code, so we are forced to check the contents of
! 3009: # stdout. On the other hand, if the command is not
! 3010: # found, the shell will set an exit code of 127 and print
! 3011: # *an error message* to stdout. So we must check for both
! 3012: # error code of zero AND non-empty stdout, which explains
! 3013: # the odd construction:
! 3014: func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
! 3015: if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
! 3016: func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
! 3017: $SED -e "$lt_sed_naive_backslashify"`
! 3018: else
! 3019: # Allow warning below.
! 3020: func_to_host_path_result=""
! 3021: fi
! 3022: ;;
! 3023: esac
! 3024: if test -z "$func_to_host_path_result" ; then
! 3025: func_error "Could not determine host path corresponding to"
! 3026: func_error " '$1'"
! 3027: func_error "Continuing, but uninstalled executables may not work."
! 3028: # Fallback:
! 3029: func_to_host_path_result="$1"
! 3030: fi
! 3031: ;;
! 3032: esac
! 3033: fi
! 3034: }
! 3035: # end: func_to_host_path
! 3036:
! 3037: # func_to_host_pathlist arg
! 3038: #
! 3039: # Convert pathlists to host format when used with build tools.
! 3040: # See func_to_host_path(), above. This function supports the
! 3041: # following $build/$host combinations (but does no harm for
! 3042: # combinations not listed here):
! 3043: # $build $host
! 3044: # mingw (msys) mingw [e.g. native]
! 3045: # cygwin mingw
! 3046: # *nix + wine mingw
! 3047: #
! 3048: # Path separators are also converted from $build format to
! 3049: # $host format. If ARG begins or ends with a path separator
! 3050: # character, it is preserved (but converted to $host format)
! 3051: # on output.
! 3052: #
! 3053: # ARG is a pathlist (on $build) that should be converted to
! 3054: # the proper representation on $host. The result is stored
! 3055: # in $func_to_host_pathlist_result.
! 3056: func_to_host_pathlist ()
! 3057: {
! 3058: func_to_host_pathlist_result="$1"
! 3059: if test -n "$1" ; then
! 3060: case $host in
! 3061: *mingw* )
! 3062: lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
! 3063: # Remove leading and trailing path separator characters from
! 3064: # ARG. msys behavior is inconsistent here, cygpath turns them
! 3065: # into '.;' and ';.', and winepath ignores them completely.
! 3066: func_to_host_pathlist_tmp2="$1"
! 3067: # Once set for this call, this variable should not be
! 3068: # reassigned. It is used in tha fallback case.
! 3069: func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
! 3070: $SED -e 's|^:*||' -e 's|:*$||'`
! 3071: case $build in
! 3072: *mingw* ) # Actually, msys.
! 3073: # Awkward: cmd appends spaces to result.
! 3074: lt_sed_strip_trailing_spaces="s/[ ]*\$//"
! 3075: func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
! 3076: $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
! 3077: func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
! 3078: $SED -e "$lt_sed_naive_backslashify"`
! 3079: ;;
! 3080: *cygwin* )
! 3081: func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
! 3082: func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
! 3083: $SED -e "$lt_sed_naive_backslashify"`
! 3084: ;;
! 3085: * )
! 3086: # unfortunately, winepath doesn't convert pathlists
! 3087: func_to_host_pathlist_result=""
! 3088: func_to_host_pathlist_oldIFS=$IFS
! 3089: IFS=:
! 3090: for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
! 3091: IFS=$func_to_host_pathlist_oldIFS
! 3092: if test -n "$func_to_host_pathlist_f" ; then
! 3093: func_to_host_path "$func_to_host_pathlist_f"
! 3094: if test -n "$func_to_host_path_result" ; then
! 3095: if test -z "$func_to_host_pathlist_result" ; then
! 3096: func_to_host_pathlist_result="$func_to_host_path_result"
! 3097: else
! 3098: func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
! 3099: fi
! 3100: fi
! 3101: fi
! 3102: IFS=:
! 3103: done
! 3104: IFS=$func_to_host_pathlist_oldIFS
! 3105: ;;
! 3106: esac
! 3107: if test -z "$func_to_host_pathlist_result" ; then
! 3108: func_error "Could not determine the host path(s) corresponding to"
! 3109: func_error " '$1'"
! 3110: func_error "Continuing, but uninstalled executables may not work."
! 3111: # Fallback. This may break if $1 contains DOS-style drive
! 3112: # specifications. The fix is not to complicate the expression
! 3113: # below, but for the user to provide a working wine installation
! 3114: # with winepath so that path translation in the cross-to-mingw
! 3115: # case works properly.
! 3116: lt_replace_pathsep_nix_to_dos="s|:|;|g"
! 3117: func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
! 3118: $SED -e "$lt_replace_pathsep_nix_to_dos"`
! 3119: fi
! 3120: # Now, add the leading and trailing path separators back
! 3121: case "$1" in
! 3122: :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
! 3123: ;;
! 3124: esac
! 3125: case "$1" in
! 3126: *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
! 3127: ;;
! 3128: esac
! 3129: ;;
! 3130: esac
! 3131: fi
! 3132: }
! 3133: # end: func_to_host_pathlist
! 3134:
! 3135: # func_emit_cwrapperexe_src
! 3136: # emit the source code for a wrapper executable on stdout
! 3137: # Must ONLY be called from within func_mode_link because
! 3138: # it depends on a number of variable set therein.
! 3139: func_emit_cwrapperexe_src ()
! 3140: {
! 3141: cat <<EOF
! 3142:
! 3143: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
! 3144: Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 3145:
! 3146: The $output program cannot be directly executed until all the libtool
! 3147: libraries that it depends on are installed.
! 3148:
! 3149: This wrapper executable should never be moved out of the build directory.
! 3150: If it is, it will not operate correctly.
! 3151:
! 3152: Currently, it simply execs the wrapper *script* "$SHELL $output",
! 3153: but could eventually absorb all of the scripts functionality and
! 3154: exec $objdir/$outputname directly.
! 3155: */
! 3156: EOF
! 3157: cat <<"EOF"
! 3158: #include <stdio.h>
! 3159: #include <stdlib.h>
! 3160: #ifdef _MSC_VER
! 3161: # include <direct.h>
! 3162: # include <process.h>
! 3163: # include <io.h>
! 3164: # define setmode _setmode
! 3165: #else
! 3166: # include <unistd.h>
! 3167: # include <stdint.h>
! 3168: # ifdef __CYGWIN__
! 3169: # include <io.h>
! 3170: # define HAVE_SETENV
! 3171: # ifdef __STRICT_ANSI__
! 3172: char *realpath (const char *, char *);
! 3173: int putenv (char *);
! 3174: int setenv (const char *, const char *, int);
! 3175: # endif
! 3176: # endif
! 3177: #endif
! 3178: #include <malloc.h>
! 3179: #include <stdarg.h>
! 3180: #include <assert.h>
! 3181: #include <string.h>
! 3182: #include <ctype.h>
! 3183: #include <errno.h>
! 3184: #include <fcntl.h>
! 3185: #include <sys/stat.h>
! 3186:
! 3187: #if defined(PATH_MAX)
! 3188: # define LT_PATHMAX PATH_MAX
! 3189: #elif defined(MAXPATHLEN)
! 3190: # define LT_PATHMAX MAXPATHLEN
! 3191: #else
! 3192: # define LT_PATHMAX 1024
! 3193: #endif
! 3194:
! 3195: #ifndef S_IXOTH
! 3196: # define S_IXOTH 0
! 3197: #endif
! 3198: #ifndef S_IXGRP
! 3199: # define S_IXGRP 0
! 3200: #endif
! 3201:
! 3202: #ifdef _MSC_VER
! 3203: # define S_IXUSR _S_IEXEC
! 3204: # define stat _stat
! 3205: # ifndef _INTPTR_T_DEFINED
! 3206: # define intptr_t int
! 3207: # endif
! 3208: #endif
! 3209:
! 3210: #ifndef DIR_SEPARATOR
! 3211: # define DIR_SEPARATOR '/'
! 3212: # define PATH_SEPARATOR ':'
! 3213: #endif
! 3214:
! 3215: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
! 3216: defined (__OS2__)
! 3217: # define HAVE_DOS_BASED_FILE_SYSTEM
! 3218: # define FOPEN_WB "wb"
! 3219: # ifndef DIR_SEPARATOR_2
! 3220: # define DIR_SEPARATOR_2 '\\'
! 3221: # endif
! 3222: # ifndef PATH_SEPARATOR_2
! 3223: # define PATH_SEPARATOR_2 ';'
! 3224: # endif
! 3225: #endif
! 3226:
! 3227: #ifndef DIR_SEPARATOR_2
! 3228: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
! 3229: #else /* DIR_SEPARATOR_2 */
! 3230: # define IS_DIR_SEPARATOR(ch) \
! 3231: (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
! 3232: #endif /* DIR_SEPARATOR_2 */
! 3233:
! 3234: #ifndef PATH_SEPARATOR_2
! 3235: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
! 3236: #else /* PATH_SEPARATOR_2 */
! 3237: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
! 3238: #endif /* PATH_SEPARATOR_2 */
! 3239:
! 3240: #ifdef __CYGWIN__
! 3241: # define FOPEN_WB "wb"
! 3242: #endif
! 3243:
! 3244: #ifndef FOPEN_WB
! 3245: # define FOPEN_WB "w"
! 3246: #endif
! 3247: #ifndef _O_BINARY
! 3248: # define _O_BINARY 0
! 3249: #endif
! 3250:
! 3251: #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
! 3252: #define XFREE(stale) do { \
! 3253: if (stale) { free ((void *) stale); stale = 0; } \
! 3254: } while (0)
! 3255:
! 3256: #undef LTWRAPPER_DEBUGPRINTF
! 3257: #if defined DEBUGWRAPPER
! 3258: # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
! 3259: static void
! 3260: ltwrapper_debugprintf (const char *fmt, ...)
! 3261: {
! 3262: va_list args;
! 3263: va_start (args, fmt);
! 3264: (void) vfprintf (stderr, fmt, args);
! 3265: va_end (args);
! 3266: }
! 3267: #else
! 3268: # define LTWRAPPER_DEBUGPRINTF(args)
! 3269: #endif
! 3270:
! 3271: const char *program_name = NULL;
! 3272:
! 3273: void *xmalloc (size_t num);
! 3274: char *xstrdup (const char *string);
! 3275: const char *base_name (const char *name);
! 3276: char *find_executable (const char *wrapper);
! 3277: char *chase_symlinks (const char *pathspec);
! 3278: int make_executable (const char *path);
! 3279: int check_executable (const char *path);
! 3280: char *strendzap (char *str, const char *pat);
! 3281: void lt_fatal (const char *message, ...);
! 3282: void lt_setenv (const char *name, const char *value);
! 3283: char *lt_extend_str (const char *orig_value, const char *add, int to_end);
! 3284: void lt_opt_process_env_set (const char *arg);
! 3285: void lt_opt_process_env_prepend (const char *arg);
! 3286: void lt_opt_process_env_append (const char *arg);
! 3287: int lt_split_name_value (const char *arg, char** name, char** value);
! 3288: void lt_update_exe_path (const char *name, const char *value);
! 3289: void lt_update_lib_path (const char *name, const char *value);
! 3290:
! 3291: static const char *script_text_part1 =
! 3292: EOF
! 3293:
! 3294: func_emit_wrapper_part1 yes |
! 3295: $SED -e 's/\([\\"]\)/\\\1/g' \
! 3296: -e 's/^/ "/' -e 's/$/\\n"/'
! 3297: echo ";"
! 3298: cat <<EOF
! 3299:
! 3300: static const char *script_text_part2 =
! 3301: EOF
! 3302: func_emit_wrapper_part2 yes |
! 3303: $SED -e 's/\([\\"]\)/\\\1/g' \
! 3304: -e 's/^/ "/' -e 's/$/\\n"/'
! 3305: echo ";"
! 3306:
! 3307: cat <<EOF
! 3308: const char * MAGIC_EXE = "$magic_exe";
! 3309: const char * LIB_PATH_VARNAME = "$shlibpath_var";
! 3310: EOF
! 3311:
! 3312: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 3313: func_to_host_pathlist "$temp_rpath"
! 3314: cat <<EOF
! 3315: const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
! 3316: EOF
! 3317: else
! 3318: cat <<"EOF"
! 3319: const char * LIB_PATH_VALUE = "";
! 3320: EOF
! 3321: fi
! 3322:
! 3323: if test -n "$dllsearchpath"; then
! 3324: func_to_host_pathlist "$dllsearchpath:"
! 3325: cat <<EOF
! 3326: const char * EXE_PATH_VARNAME = "PATH";
! 3327: const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
! 3328: EOF
! 3329: else
! 3330: cat <<"EOF"
! 3331: const char * EXE_PATH_VARNAME = "";
! 3332: const char * EXE_PATH_VALUE = "";
! 3333: EOF
! 3334: fi
! 3335:
! 3336: if test "$fast_install" = yes; then
! 3337: cat <<EOF
! 3338: const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
! 3339: EOF
! 3340: else
! 3341: cat <<EOF
! 3342: const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
! 3343: EOF
! 3344: fi
! 3345:
! 3346:
! 3347: cat <<"EOF"
! 3348:
! 3349: #define LTWRAPPER_OPTION_PREFIX "--lt-"
! 3350: #define LTWRAPPER_OPTION_PREFIX_LENGTH 5
! 3351:
! 3352: static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
! 3353: static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
! 3354:
! 3355: static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
! 3356:
! 3357: static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
! 3358: static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
! 3359: /* argument is putenv-style "foo=bar", value of foo is set to bar */
! 3360:
! 3361: static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
! 3362: static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
! 3363: /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
! 3364:
! 3365: static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
! 3366: static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
! 3367: /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
! 3368:
! 3369: int
! 3370: main (int argc, char *argv[])
! 3371: {
! 3372: char **newargz;
! 3373: int newargc;
! 3374: char *tmp_pathspec;
! 3375: char *actual_cwrapper_path;
! 3376: char *actual_cwrapper_name;
! 3377: char *target_name;
! 3378: char *lt_argv_zero;
! 3379: intptr_t rval = 127;
! 3380:
! 3381: int i;
! 3382:
! 3383: program_name = (char *) xstrdup (base_name (argv[0]));
! 3384: LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
! 3385: LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
! 3386:
! 3387: /* very simple arg parsing; don't want to rely on getopt */
! 3388: for (i = 1; i < argc; i++)
! 3389: {
! 3390: if (strcmp (argv[i], dumpscript_opt) == 0)
! 3391: {
! 3392: EOF
! 3393: case "$host" in
! 3394: *mingw* | *cygwin* )
! 3395: # make stdout use "unix" line endings
! 3396: echo " setmode(1,_O_BINARY);"
! 3397: ;;
! 3398: esac
! 3399:
! 3400: cat <<"EOF"
! 3401: printf ("%s", script_text_part1);
! 3402: printf ("%s", script_text_part2);
! 3403: return 0;
! 3404: }
! 3405: }
! 3406:
! 3407: newargz = XMALLOC (char *, argc + 1);
! 3408: tmp_pathspec = find_executable (argv[0]);
! 3409: if (tmp_pathspec == NULL)
! 3410: lt_fatal ("Couldn't find %s", argv[0]);
! 3411: LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
! 3412: tmp_pathspec));
! 3413:
! 3414: actual_cwrapper_path = chase_symlinks (tmp_pathspec);
! 3415: LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
! 3416: actual_cwrapper_path));
! 3417: XFREE (tmp_pathspec);
! 3418:
! 3419: actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
! 3420: strendzap (actual_cwrapper_path, actual_cwrapper_name);
! 3421:
! 3422: /* wrapper name transforms */
! 3423: strendzap (actual_cwrapper_name, ".exe");
! 3424: tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
! 3425: XFREE (actual_cwrapper_name);
! 3426: actual_cwrapper_name = tmp_pathspec;
! 3427: tmp_pathspec = 0;
! 3428:
! 3429: /* target_name transforms -- use actual target program name; might have lt- prefix */
! 3430: target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
! 3431: strendzap (target_name, ".exe");
! 3432: tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
! 3433: XFREE (target_name);
! 3434: target_name = tmp_pathspec;
! 3435: tmp_pathspec = 0;
! 3436:
! 3437: LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
! 3438: target_name));
! 3439: EOF
! 3440:
! 3441: cat <<EOF
! 3442: newargz[0] =
! 3443: XMALLOC (char, (strlen (actual_cwrapper_path) +
! 3444: strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
! 3445: strcpy (newargz[0], actual_cwrapper_path);
! 3446: strcat (newargz[0], "$objdir");
! 3447: strcat (newargz[0], "/");
! 3448: EOF
! 3449:
! 3450: cat <<"EOF"
! 3451: /* stop here, and copy so we don't have to do this twice */
! 3452: tmp_pathspec = xstrdup (newargz[0]);
! 3453:
! 3454: /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
! 3455: strcat (newargz[0], actual_cwrapper_name);
! 3456:
! 3457: /* DO want the lt- prefix here if it exists, so use target_name */
! 3458: lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
! 3459: XFREE (tmp_pathspec);
! 3460: tmp_pathspec = NULL;
! 3461: EOF
! 3462:
! 3463: case $host_os in
! 3464: mingw*)
! 3465: cat <<"EOF"
! 3466: {
! 3467: char* p;
! 3468: while ((p = strchr (newargz[0], '\\')) != NULL)
! 3469: {
! 3470: *p = '/';
! 3471: }
! 3472: while ((p = strchr (lt_argv_zero, '\\')) != NULL)
! 3473: {
! 3474: *p = '/';
! 3475: }
! 3476: }
! 3477: EOF
! 3478: ;;
! 3479: esac
! 3480:
! 3481: cat <<"EOF"
! 3482: XFREE (target_name);
! 3483: XFREE (actual_cwrapper_path);
! 3484: XFREE (actual_cwrapper_name);
! 3485:
! 3486: lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
! 3487: lt_setenv ("DUALCASE", "1"); /* for MSK sh */
! 3488: lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
! 3489: lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
! 3490:
! 3491: newargc=0;
! 3492: for (i = 1; i < argc; i++)
! 3493: {
! 3494: if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
! 3495: {
! 3496: if (argv[i][env_set_opt_len] == '=')
! 3497: {
! 3498: const char *p = argv[i] + env_set_opt_len + 1;
! 3499: lt_opt_process_env_set (p);
! 3500: }
! 3501: else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
! 3502: {
! 3503: lt_opt_process_env_set (argv[++i]); /* don't copy */
! 3504: }
! 3505: else
! 3506: lt_fatal ("%s missing required argument", env_set_opt);
! 3507: continue;
! 3508: }
! 3509: if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
! 3510: {
! 3511: if (argv[i][env_prepend_opt_len] == '=')
! 3512: {
! 3513: const char *p = argv[i] + env_prepend_opt_len + 1;
! 3514: lt_opt_process_env_prepend (p);
! 3515: }
! 3516: else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
! 3517: {
! 3518: lt_opt_process_env_prepend (argv[++i]); /* don't copy */
! 3519: }
! 3520: else
! 3521: lt_fatal ("%s missing required argument", env_prepend_opt);
! 3522: continue;
! 3523: }
! 3524: if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
! 3525: {
! 3526: if (argv[i][env_append_opt_len] == '=')
! 3527: {
! 3528: const char *p = argv[i] + env_append_opt_len + 1;
! 3529: lt_opt_process_env_append (p);
! 3530: }
! 3531: else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
! 3532: {
! 3533: lt_opt_process_env_append (argv[++i]); /* don't copy */
! 3534: }
! 3535: else
! 3536: lt_fatal ("%s missing required argument", env_append_opt);
! 3537: continue;
! 3538: }
! 3539: if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
! 3540: {
! 3541: /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
! 3542: namespace, but it is not one of the ones we know about and
! 3543: have already dealt with, above (inluding dump-script), then
! 3544: report an error. Otherwise, targets might begin to believe
! 3545: they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
! 3546: namespace. The first time any user complains about this, we'll
! 3547: need to make LTWRAPPER_OPTION_PREFIX a configure-time option
! 3548: or a configure.ac-settable value.
! 3549: */
! 3550: lt_fatal ("Unrecognized option in %s namespace: '%s'",
! 3551: ltwrapper_option_prefix, argv[i]);
! 3552: }
! 3553: /* otherwise ... */
! 3554: newargz[++newargc] = xstrdup (argv[i]);
! 3555: }
! 3556: newargz[++newargc] = NULL;
! 3557:
! 3558: LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
! 3559: for (i = 0; i < newargc; i++)
! 3560: {
! 3561: LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
! 3562: }
! 3563:
! 3564: EOF
! 3565:
! 3566: case $host_os in
! 3567: mingw*)
! 3568: cat <<"EOF"
! 3569: /* execv doesn't actually work on mingw as expected on unix */
! 3570: rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
! 3571: if (rval == -1)
! 3572: {
! 3573: /* failed to start process */
! 3574: LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
! 3575: return 127;
! 3576: }
! 3577: return rval;
! 3578: EOF
! 3579: ;;
! 3580: *)
! 3581: cat <<"EOF"
! 3582: execv (lt_argv_zero, newargz);
! 3583: return rval; /* =127, but avoids unused variable warning */
! 3584: EOF
! 3585: ;;
! 3586: esac
! 3587:
! 3588: cat <<"EOF"
! 3589: }
! 3590:
! 3591: void *
! 3592: xmalloc (size_t num)
! 3593: {
! 3594: void *p = (void *) malloc (num);
! 3595: if (!p)
! 3596: lt_fatal ("Memory exhausted");
! 3597:
! 3598: return p;
! 3599: }
! 3600:
! 3601: char *
! 3602: xstrdup (const char *string)
! 3603: {
! 3604: return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
! 3605: string) : NULL;
! 3606: }
! 3607:
! 3608: const char *
! 3609: base_name (const char *name)
! 3610: {
! 3611: const char *base;
! 3612:
! 3613: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3614: /* Skip over the disk name in MSDOS pathnames. */
! 3615: if (isalpha ((unsigned char) name[0]) && name[1] == ':')
! 3616: name += 2;
! 3617: #endif
! 3618:
! 3619: for (base = name; *name; name++)
! 3620: if (IS_DIR_SEPARATOR (*name))
! 3621: base = name + 1;
! 3622: return base;
! 3623: }
! 3624:
! 3625: int
! 3626: check_executable (const char *path)
! 3627: {
! 3628: struct stat st;
! 3629:
! 3630: LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
! 3631: path ? (*path ? path : "EMPTY!") : "NULL!"));
! 3632: if ((!path) || (!*path))
! 3633: return 0;
! 3634:
! 3635: if ((stat (path, &st) >= 0)
! 3636: && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
! 3637: return 1;
! 3638: else
! 3639: return 0;
! 3640: }
! 3641:
! 3642: int
! 3643: make_executable (const char *path)
! 3644: {
! 3645: int rval = 0;
! 3646: struct stat st;
! 3647:
! 3648: LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
! 3649: path ? (*path ? path : "EMPTY!") : "NULL!"));
! 3650: if ((!path) || (!*path))
! 3651: return 0;
! 3652:
! 3653: if (stat (path, &st) >= 0)
! 3654: {
! 3655: rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
! 3656: }
! 3657: return rval;
! 3658: }
! 3659:
! 3660: /* Searches for the full path of the wrapper. Returns
! 3661: newly allocated full path name if found, NULL otherwise
! 3662: Does not chase symlinks, even on platforms that support them.
! 3663: */
! 3664: char *
! 3665: find_executable (const char *wrapper)
! 3666: {
! 3667: int has_slash = 0;
! 3668: const char *p;
! 3669: const char *p_next;
! 3670: /* static buffer for getcwd */
! 3671: char tmp[LT_PATHMAX + 1];
! 3672: int tmp_len;
! 3673: char *concat_name;
! 3674:
! 3675: LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
! 3676: wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
! 3677:
! 3678: if ((wrapper == NULL) || (*wrapper == '\0'))
! 3679: return NULL;
! 3680:
! 3681: /* Absolute path? */
! 3682: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3683: if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
! 3684: {
! 3685: concat_name = xstrdup (wrapper);
! 3686: if (check_executable (concat_name))
! 3687: return concat_name;
! 3688: XFREE (concat_name);
! 3689: }
! 3690: else
! 3691: {
! 3692: #endif
! 3693: if (IS_DIR_SEPARATOR (wrapper[0]))
! 3694: {
! 3695: concat_name = xstrdup (wrapper);
! 3696: if (check_executable (concat_name))
! 3697: return concat_name;
! 3698: XFREE (concat_name);
! 3699: }
! 3700: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3701: }
! 3702: #endif
! 3703:
! 3704: for (p = wrapper; *p; p++)
! 3705: if (*p == '/')
! 3706: {
! 3707: has_slash = 1;
! 3708: break;
! 3709: }
! 3710: if (!has_slash)
! 3711: {
! 3712: /* no slashes; search PATH */
! 3713: const char *path = getenv ("PATH");
! 3714: if (path != NULL)
! 3715: {
! 3716: for (p = path; *p; p = p_next)
! 3717: {
! 3718: const char *q;
! 3719: size_t p_len;
! 3720: for (q = p; *q; q++)
! 3721: if (IS_PATH_SEPARATOR (*q))
! 3722: break;
! 3723: p_len = q - p;
! 3724: p_next = (*q == '\0' ? q : q + 1);
! 3725: if (p_len == 0)
! 3726: {
! 3727: /* empty path: current directory */
! 3728: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 3729: lt_fatal ("getcwd failed");
! 3730: tmp_len = strlen (tmp);
! 3731: concat_name =
! 3732: XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 3733: memcpy (concat_name, tmp, tmp_len);
! 3734: concat_name[tmp_len] = '/';
! 3735: strcpy (concat_name + tmp_len + 1, wrapper);
! 3736: }
! 3737: else
! 3738: {
! 3739: concat_name =
! 3740: XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
! 3741: memcpy (concat_name, p, p_len);
! 3742: concat_name[p_len] = '/';
! 3743: strcpy (concat_name + p_len + 1, wrapper);
! 3744: }
! 3745: if (check_executable (concat_name))
! 3746: return concat_name;
! 3747: XFREE (concat_name);
! 3748: }
! 3749: }
! 3750: /* not found in PATH; assume curdir */
! 3751: }
! 3752: /* Relative path | not found in path: prepend cwd */
! 3753: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 3754: lt_fatal ("getcwd failed");
! 3755: tmp_len = strlen (tmp);
! 3756: concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 3757: memcpy (concat_name, tmp, tmp_len);
! 3758: concat_name[tmp_len] = '/';
! 3759: strcpy (concat_name + tmp_len + 1, wrapper);
! 3760:
! 3761: if (check_executable (concat_name))
! 3762: return concat_name;
! 3763: XFREE (concat_name);
! 3764: return NULL;
! 3765: }
! 3766:
! 3767: char *
! 3768: chase_symlinks (const char *pathspec)
! 3769: {
! 3770: #ifndef S_ISLNK
! 3771: return xstrdup (pathspec);
! 3772: #else
! 3773: char buf[LT_PATHMAX];
! 3774: struct stat s;
! 3775: char *tmp_pathspec = xstrdup (pathspec);
! 3776: char *p;
! 3777: int has_symlinks = 0;
! 3778: while (strlen (tmp_pathspec) && !has_symlinks)
! 3779: {
! 3780: LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
! 3781: tmp_pathspec));
! 3782: if (lstat (tmp_pathspec, &s) == 0)
! 3783: {
! 3784: if (S_ISLNK (s.st_mode) != 0)
! 3785: {
! 3786: has_symlinks = 1;
! 3787: break;
! 3788: }
! 3789:
! 3790: /* search backwards for last DIR_SEPARATOR */
! 3791: p = tmp_pathspec + strlen (tmp_pathspec) - 1;
! 3792: while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 3793: p--;
! 3794: if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 3795: {
! 3796: /* no more DIR_SEPARATORS left */
! 3797: break;
! 3798: }
! 3799: *p = '\0';
! 3800: }
! 3801: else
! 3802: {
! 3803: char *errstr = strerror (errno);
! 3804: lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
! 3805: }
! 3806: }
! 3807: XFREE (tmp_pathspec);
! 3808:
! 3809: if (!has_symlinks)
! 3810: {
! 3811: return xstrdup (pathspec);
! 3812: }
! 3813:
! 3814: tmp_pathspec = realpath (pathspec, buf);
! 3815: if (tmp_pathspec == 0)
! 3816: {
! 3817: lt_fatal ("Could not follow symlinks for %s", pathspec);
! 3818: }
! 3819: return xstrdup (tmp_pathspec);
! 3820: #endif
! 3821: }
! 3822:
! 3823: char *
! 3824: strendzap (char *str, const char *pat)
! 3825: {
! 3826: size_t len, patlen;
! 3827:
! 3828: assert (str != NULL);
! 3829: assert (pat != NULL);
! 3830:
! 3831: len = strlen (str);
! 3832: patlen = strlen (pat);
! 3833:
! 3834: if (patlen <= len)
! 3835: {
! 3836: str += len - patlen;
! 3837: if (strcmp (str, pat) == 0)
! 3838: *str = '\0';
! 3839: }
! 3840: return str;
! 3841: }
! 3842:
! 3843: static void
! 3844: lt_error_core (int exit_status, const char *mode,
! 3845: const char *message, va_list ap)
! 3846: {
! 3847: fprintf (stderr, "%s: %s: ", program_name, mode);
! 3848: vfprintf (stderr, message, ap);
! 3849: fprintf (stderr, ".\n");
! 3850:
! 3851: if (exit_status >= 0)
! 3852: exit (exit_status);
! 3853: }
! 3854:
! 3855: void
! 3856: lt_fatal (const char *message, ...)
! 3857: {
! 3858: va_list ap;
! 3859: va_start (ap, message);
! 3860: lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
! 3861: va_end (ap);
! 3862: }
! 3863:
! 3864: void
! 3865: lt_setenv (const char *name, const char *value)
! 3866: {
! 3867: LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
! 3868: (name ? name : "<NULL>"),
! 3869: (value ? value : "<NULL>")));
! 3870: {
! 3871: #ifdef HAVE_SETENV
! 3872: /* always make a copy, for consistency with !HAVE_SETENV */
! 3873: char *str = xstrdup (value);
! 3874: setenv (name, str, 1);
! 3875: #else
! 3876: int len = strlen (name) + 1 + strlen (value) + 1;
! 3877: char *str = XMALLOC (char, len);
! 3878: sprintf (str, "%s=%s", name, value);
! 3879: if (putenv (str) != EXIT_SUCCESS)
! 3880: {
! 3881: XFREE (str);
! 3882: }
! 3883: #endif
! 3884: }
! 3885: }
! 3886:
! 3887: char *
! 3888: lt_extend_str (const char *orig_value, const char *add, int to_end)
! 3889: {
! 3890: char *new_value;
! 3891: if (orig_value && *orig_value)
! 3892: {
! 3893: int orig_value_len = strlen (orig_value);
! 3894: int add_len = strlen (add);
! 3895: new_value = XMALLOC (char, add_len + orig_value_len + 1);
! 3896: if (to_end)
! 3897: {
! 3898: strcpy (new_value, orig_value);
! 3899: strcpy (new_value + orig_value_len, add);
! 3900: }
! 3901: else
! 3902: {
! 3903: strcpy (new_value, add);
! 3904: strcpy (new_value + add_len, orig_value);
! 3905: }
! 3906: }
! 3907: else
! 3908: {
! 3909: new_value = xstrdup (add);
! 3910: }
! 3911: return new_value;
! 3912: }
! 3913:
! 3914: int
! 3915: lt_split_name_value (const char *arg, char** name, char** value)
! 3916: {
! 3917: const char *p;
! 3918: int len;
! 3919: if (!arg || !*arg)
! 3920: return 1;
! 3921:
! 3922: p = strchr (arg, (int)'=');
! 3923:
! 3924: if (!p)
! 3925: return 1;
! 3926:
! 3927: *value = xstrdup (++p);
! 3928:
! 3929: len = strlen (arg) - strlen (*value);
! 3930: *name = XMALLOC (char, len);
! 3931: strncpy (*name, arg, len-1);
! 3932: (*name)[len - 1] = '\0';
! 3933:
! 3934: return 0;
! 3935: }
! 3936:
! 3937: void
! 3938: lt_opt_process_env_set (const char *arg)
! 3939: {
! 3940: char *name = NULL;
! 3941: char *value = NULL;
! 3942:
! 3943: if (lt_split_name_value (arg, &name, &value) != 0)
! 3944: {
! 3945: XFREE (name);
! 3946: XFREE (value);
! 3947: lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
! 3948: }
! 3949:
! 3950: lt_setenv (name, value);
! 3951: XFREE (name);
! 3952: XFREE (value);
! 3953: }
! 3954:
! 3955: void
! 3956: lt_opt_process_env_prepend (const char *arg)
! 3957: {
! 3958: char *name = NULL;
! 3959: char *value = NULL;
! 3960: char *new_value = NULL;
! 3961:
! 3962: if (lt_split_name_value (arg, &name, &value) != 0)
! 3963: {
! 3964: XFREE (name);
! 3965: XFREE (value);
! 3966: lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
! 3967: }
! 3968:
! 3969: new_value = lt_extend_str (getenv (name), value, 0);
! 3970: lt_setenv (name, new_value);
! 3971: XFREE (new_value);
! 3972: XFREE (name);
! 3973: XFREE (value);
! 3974: }
! 3975:
! 3976: void
! 3977: lt_opt_process_env_append (const char *arg)
! 3978: {
! 3979: char *name = NULL;
! 3980: char *value = NULL;
! 3981: char *new_value = NULL;
! 3982:
! 3983: if (lt_split_name_value (arg, &name, &value) != 0)
! 3984: {
! 3985: XFREE (name);
! 3986: XFREE (value);
! 3987: lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
! 3988: }
! 3989:
! 3990: new_value = lt_extend_str (getenv (name), value, 1);
! 3991: lt_setenv (name, new_value);
! 3992: XFREE (new_value);
! 3993: XFREE (name);
! 3994: XFREE (value);
! 3995: }
! 3996:
! 3997: void
! 3998: lt_update_exe_path (const char *name, const char *value)
! 3999: {
! 4000: LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
! 4001: (name ? name : "<NULL>"),
! 4002: (value ? value : "<NULL>")));
! 4003:
! 4004: if (name && *name && value && *value)
! 4005: {
! 4006: char *new_value = lt_extend_str (getenv (name), value, 0);
! 4007: /* some systems can't cope with a ':'-terminated path #' */
! 4008: int len = strlen (new_value);
! 4009: while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
! 4010: {
! 4011: new_value[len-1] = '\0';
! 4012: }
! 4013: lt_setenv (name, new_value);
! 4014: XFREE (new_value);
! 4015: }
! 4016: }
! 4017:
! 4018: void
! 4019: lt_update_lib_path (const char *name, const char *value)
! 4020: {
! 4021: LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
! 4022: (name ? name : "<NULL>"),
! 4023: (value ? value : "<NULL>")));
! 4024:
! 4025: if (name && *name && value && *value)
! 4026: {
! 4027: char *new_value = lt_extend_str (getenv (name), value, 0);
! 4028: lt_setenv (name, new_value);
! 4029: XFREE (new_value);
! 4030: }
! 4031: }
! 4032:
! 4033:
! 4034: EOF
! 4035: }
! 4036: # end: func_emit_cwrapperexe_src
! 4037:
! 4038: # func_mode_link arg...
! 4039: func_mode_link ()
! 4040: {
! 4041: $opt_debug
! 4042: case $host in
! 4043: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 4044: # It is impossible to link a dll without this setting, and
! 4045: # we shouldn't force the makefile maintainer to figure out
! 4046: # which system we are compiling for in order to pass an extra
! 4047: # flag for every libtool invocation.
! 4048: # allow_undefined=no
! 4049:
! 4050: # FIXME: Unfortunately, there are problems with the above when trying
! 4051: # to make a dll which has undefined symbols, in which case not
! 4052: # even a static library is built. For now, we need to specify
! 4053: # -no-undefined on the libtool link line when we can be certain
! 4054: # that all symbols are satisfied, otherwise we get a static library.
! 4055: allow_undefined=yes
! 4056: ;;
! 4057: *)
! 4058: allow_undefined=yes
! 4059: ;;
! 4060: esac
! 4061: libtool_args=$nonopt
! 4062: base_compile="$nonopt $@"
! 4063: compile_command=$nonopt
! 4064: finalize_command=$nonopt
! 4065:
! 4066: compile_rpath=
! 4067: finalize_rpath=
! 4068: compile_shlibpath=
! 4069: finalize_shlibpath=
! 4070: convenience=
! 4071: old_convenience=
! 4072: deplibs=
! 4073: old_deplibs=
! 4074: compiler_flags=
! 4075: linker_flags=
! 4076: dllsearchpath=
! 4077: lib_search_path=`pwd`
! 4078: inst_prefix_dir=
! 4079: new_inherited_linker_flags=
! 4080:
! 4081: avoid_version=no
! 4082: dlfiles=
! 4083: dlprefiles=
! 4084: dlself=no
! 4085: export_dynamic=no
! 4086: export_symbols=
! 4087: export_symbols_regex=
! 4088: generated=
! 4089: libobjs=
! 4090: ltlibs=
! 4091: module=no
! 4092: no_install=no
! 4093: objs=
! 4094: non_pic_objects=
! 4095: precious_files_regex=
! 4096: prefer_static_libs=no
! 4097: preload=no
! 4098: prev=
! 4099: prevarg=
! 4100: release=
! 4101: rpath=
! 4102: xrpath=
! 4103: perm_rpath=
! 4104: temp_rpath=
! 4105: thread_safe=no
! 4106: vinfo=
! 4107: vinfo_number=no
! 4108: weak_libs=
! 4109: single_module="${wl}-single_module"
! 4110: func_infer_tag $base_compile
! 4111:
! 4112: # We need to know -static, to get the right output filenames.
! 4113: for arg
! 4114: do
! 4115: case $arg in
! 4116: -shared)
! 4117: test "$build_libtool_libs" != yes && \
! 4118: func_fatal_configuration "can not build a shared library"
! 4119: build_old_libs=no
! 4120: break
! 4121: ;;
! 4122: -all-static | -static | -static-libtool-libs)
! 4123: case $arg in
! 4124: -all-static)
! 4125: if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
! 4126: func_warning "complete static linking is impossible in this configuration"
! 4127: fi
! 4128: if test -n "$link_static_flag"; then
! 4129: dlopen_self=$dlopen_self_static
! 4130: fi
! 4131: prefer_static_libs=yes
! 4132: ;;
! 4133: -static)
! 4134: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 4135: dlopen_self=$dlopen_self_static
! 4136: fi
! 4137: prefer_static_libs=built
! 4138: ;;
! 4139: -static-libtool-libs)
! 4140: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 4141: dlopen_self=$dlopen_self_static
! 4142: fi
! 4143: prefer_static_libs=yes
! 4144: ;;
! 4145: esac
! 4146: build_libtool_libs=no
! 4147: build_old_libs=yes
! 4148: break
! 4149: ;;
! 4150: esac
! 4151: done
! 4152:
! 4153: # See if our shared archives depend on static archives.
! 4154: test -n "$old_archive_from_new_cmds" && build_old_libs=yes
! 4155:
! 4156: # Go through the arguments, transforming them on the way.
! 4157: while test "$#" -gt 0; do
! 4158: arg="$1"
! 4159: shift
! 4160: func_quote_for_eval "$arg"
! 4161: qarg=$func_quote_for_eval_unquoted_result
! 4162: func_append libtool_args " $func_quote_for_eval_result"
! 4163:
! 4164: # If the previous option needs an argument, assign it.
! 4165: if test -n "$prev"; then
! 4166: case $prev in
! 4167: output)
! 4168: func_append compile_command " @OUTPUT@"
! 4169: func_append finalize_command " @OUTPUT@"
! 4170: ;;
! 4171: esac
! 4172:
! 4173: case $prev in
! 4174: dlfiles|dlprefiles)
! 4175: if test "$preload" = no; then
! 4176: # Add the symbol object into the linking commands.
! 4177: func_append compile_command " @SYMFILE@"
! 4178: func_append finalize_command " @SYMFILE@"
! 4179: preload=yes
! 4180: fi
! 4181: case $arg in
! 4182: *.la | *.lo) ;; # We handle these cases below.
! 4183: force)
! 4184: if test "$dlself" = no; then
! 4185: dlself=needless
! 4186: export_dynamic=yes
! 4187: fi
! 4188: prev=
! 4189: continue
! 4190: ;;
! 4191: self)
! 4192: if test "$prev" = dlprefiles; then
! 4193: dlself=yes
! 4194: elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
! 4195: dlself=yes
! 4196: else
! 4197: dlself=needless
! 4198: export_dynamic=yes
! 4199: fi
! 4200: prev=
! 4201: continue
! 4202: ;;
! 4203: *)
! 4204: if test "$prev" = dlfiles; then
! 4205: dlfiles="$dlfiles $arg"
! 4206: else
! 4207: dlprefiles="$dlprefiles $arg"
! 4208: fi
! 4209: prev=
! 4210: continue
! 4211: ;;
! 4212: esac
! 4213: ;;
! 4214: expsyms)
! 4215: export_symbols="$arg"
! 4216: test -f "$arg" \
! 4217: || func_fatal_error "symbol file \`$arg' does not exist"
! 4218: prev=
! 4219: continue
! 4220: ;;
! 4221: expsyms_regex)
! 4222: export_symbols_regex="$arg"
! 4223: prev=
! 4224: continue
! 4225: ;;
! 4226: framework)
! 4227: case $host in
! 4228: *-*-darwin*)
! 4229: case "$deplibs " in
! 4230: *" $qarg.ltframework "*) ;;
! 4231: *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
! 4232: ;;
! 4233: esac
! 4234: ;;
! 4235: esac
! 4236: prev=
! 4237: continue
! 4238: ;;
! 4239: inst_prefix)
! 4240: inst_prefix_dir="$arg"
! 4241: prev=
! 4242: continue
! 4243: ;;
! 4244: objectlist)
! 4245: if test -f "$arg"; then
! 4246: save_arg=$arg
! 4247: moreargs=
! 4248: for fil in `cat "$save_arg"`
! 4249: do
! 4250: # moreargs="$moreargs $fil"
! 4251: arg=$fil
! 4252: # A libtool-controlled object.
! 4253:
! 4254: # Check to see that this really is a libtool object.
! 4255: if func_lalib_unsafe_p "$arg"; then
! 4256: pic_object=
! 4257: non_pic_object=
! 4258:
! 4259: # Read the .lo file
! 4260: func_source "$arg"
! 4261:
! 4262: if test -z "$pic_object" ||
! 4263: test -z "$non_pic_object" ||
! 4264: test "$pic_object" = none &&
! 4265: test "$non_pic_object" = none; then
! 4266: func_fatal_error "cannot find name of object for \`$arg'"
! 4267: fi
! 4268:
! 4269: # Extract subdirectory from the argument.
! 4270: func_dirname "$arg" "/" ""
! 4271: xdir="$func_dirname_result"
! 4272:
! 4273: if test "$pic_object" != none; then
! 4274: # Prepend the subdirectory the object is found in.
! 4275: pic_object="$xdir$pic_object"
! 4276:
! 4277: if test "$prev" = dlfiles; then
! 4278: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 4279: dlfiles="$dlfiles $pic_object"
! 4280: prev=
! 4281: continue
! 4282: else
! 4283: # If libtool objects are unsupported, then we need to preload.
! 4284: prev=dlprefiles
! 4285: fi
! 4286: fi
! 4287:
! 4288: # CHECK ME: I think I busted this. -Ossama
! 4289: if test "$prev" = dlprefiles; then
! 4290: # Preload the old-style object.
! 4291: dlprefiles="$dlprefiles $pic_object"
! 4292: prev=
! 4293: fi
! 4294:
! 4295: # A PIC object.
! 4296: func_append libobjs " $pic_object"
! 4297: arg="$pic_object"
! 4298: fi
! 4299:
! 4300: # Non-PIC object.
! 4301: if test "$non_pic_object" != none; then
! 4302: # Prepend the subdirectory the object is found in.
! 4303: non_pic_object="$xdir$non_pic_object"
! 4304:
! 4305: # A standard non-PIC object
! 4306: func_append non_pic_objects " $non_pic_object"
! 4307: if test -z "$pic_object" || test "$pic_object" = none ; then
! 4308: arg="$non_pic_object"
! 4309: fi
! 4310: else
! 4311: # If the PIC object exists, use it instead.
! 4312: # $xdir was prepended to $pic_object above.
! 4313: non_pic_object="$pic_object"
! 4314: func_append non_pic_objects " $non_pic_object"
! 4315: fi
! 4316: else
! 4317: # Only an error if not doing a dry-run.
! 4318: if $opt_dry_run; then
! 4319: # Extract subdirectory from the argument.
! 4320: func_dirname "$arg" "/" ""
! 4321: xdir="$func_dirname_result"
! 4322:
! 4323: func_lo2o "$arg"
! 4324: pic_object=$xdir$objdir/$func_lo2o_result
! 4325: non_pic_object=$xdir$func_lo2o_result
! 4326: func_append libobjs " $pic_object"
! 4327: func_append non_pic_objects " $non_pic_object"
! 4328: else
! 4329: func_fatal_error "\`$arg' is not a valid libtool object"
! 4330: fi
! 4331: fi
! 4332: done
! 4333: else
! 4334: func_fatal_error "link input file \`$arg' does not exist"
! 4335: fi
! 4336: arg=$save_arg
! 4337: prev=
! 4338: continue
! 4339: ;;
! 4340: precious_regex)
! 4341: precious_files_regex="$arg"
! 4342: prev=
! 4343: continue
! 4344: ;;
! 4345: release)
! 4346: release="-$arg"
! 4347: prev=
! 4348: continue
! 4349: ;;
! 4350: rpath | xrpath)
! 4351: # We need an absolute path.
! 4352: case $arg in
! 4353: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4354: *)
! 4355: func_fatal_error "only absolute run-paths are allowed"
! 4356: ;;
! 4357: esac
! 4358: if test "$prev" = rpath; then
! 4359: case "$rpath " in
! 4360: *" $arg "*) ;;
! 4361: *) rpath="$rpath $arg" ;;
! 4362: esac
! 4363: else
! 4364: case "$xrpath " in
! 4365: *" $arg "*) ;;
! 4366: *) xrpath="$xrpath $arg" ;;
! 4367: esac
! 4368: fi
! 4369: prev=
! 4370: continue
! 4371: ;;
! 4372: shrext)
! 4373: shrext_cmds="$arg"
! 4374: prev=
! 4375: continue
! 4376: ;;
! 4377: weak)
! 4378: weak_libs="$weak_libs $arg"
! 4379: prev=
! 4380: continue
! 4381: ;;
! 4382: xcclinker)
! 4383: linker_flags="$linker_flags $qarg"
! 4384: compiler_flags="$compiler_flags $qarg"
! 4385: prev=
! 4386: func_append compile_command " $qarg"
! 4387: func_append finalize_command " $qarg"
! 4388: continue
! 4389: ;;
! 4390: xcompiler)
! 4391: compiler_flags="$compiler_flags $qarg"
! 4392: prev=
! 4393: func_append compile_command " $qarg"
! 4394: func_append finalize_command " $qarg"
! 4395: continue
! 4396: ;;
! 4397: xlinker)
! 4398: linker_flags="$linker_flags $qarg"
! 4399: compiler_flags="$compiler_flags $wl$qarg"
! 4400: prev=
! 4401: func_append compile_command " $wl$qarg"
! 4402: func_append finalize_command " $wl$qarg"
! 4403: continue
! 4404: ;;
! 4405: *)
! 4406: eval "$prev=\"\$arg\""
! 4407: prev=
! 4408: continue
! 4409: ;;
! 4410: esac
! 4411: fi # test -n "$prev"
! 4412:
! 4413: prevarg="$arg"
! 4414:
! 4415: case $arg in
! 4416: -all-static)
! 4417: if test -n "$link_static_flag"; then
! 4418: # See comment for -static flag below, for more details.
! 4419: func_append compile_command " $link_static_flag"
! 4420: func_append finalize_command " $link_static_flag"
! 4421: fi
! 4422: continue
! 4423: ;;
! 4424:
! 4425: -allow-undefined)
! 4426: # FIXME: remove this flag sometime in the future.
! 4427: func_fatal_error "\`-allow-undefined' must not be used because it is the default"
! 4428: ;;
! 4429:
! 4430: -avoid-version)
! 4431: avoid_version=yes
! 4432: continue
! 4433: ;;
! 4434:
! 4435: -dlopen)
! 4436: prev=dlfiles
! 4437: continue
! 4438: ;;
! 4439:
! 4440: -dlpreopen)
! 4441: prev=dlprefiles
! 4442: continue
! 4443: ;;
! 4444:
! 4445: -export-dynamic)
! 4446: export_dynamic=yes
! 4447: continue
! 4448: ;;
! 4449:
! 4450: -export-symbols | -export-symbols-regex)
! 4451: if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
! 4452: func_fatal_error "more than one -exported-symbols argument is not allowed"
! 4453: fi
! 4454: if test "X$arg" = "X-export-symbols"; then
! 4455: prev=expsyms
! 4456: else
! 4457: prev=expsyms_regex
! 4458: fi
! 4459: continue
! 4460: ;;
! 4461:
! 4462: -framework)
! 4463: prev=framework
! 4464: continue
! 4465: ;;
! 4466:
! 4467: -inst-prefix-dir)
! 4468: prev=inst_prefix
! 4469: continue
! 4470: ;;
! 4471:
! 4472: # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
! 4473: # so, if we see these flags be careful not to treat them like -L
! 4474: -L[A-Z][A-Z]*:*)
! 4475: case $with_gcc/$host in
! 4476: no/*-*-irix* | /*-*-irix*)
! 4477: func_append compile_command " $arg"
! 4478: func_append finalize_command " $arg"
! 4479: ;;
! 4480: esac
! 4481: continue
! 4482: ;;
! 4483:
! 4484: -L*)
! 4485: func_stripname '-L' '' "$arg"
! 4486: dir=$func_stripname_result
! 4487: if test -z "$dir"; then
! 4488: if test "$#" -gt 0; then
! 4489: func_fatal_error "require no space between \`-L' and \`$1'"
! 4490: else
! 4491: func_fatal_error "need path for \`-L' option"
! 4492: fi
! 4493: fi
! 4494: # We need an absolute path.
! 4495: case $dir in
! 4496: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4497: *)
! 4498: absdir=`cd "$dir" && pwd`
! 4499: test -z "$absdir" && \
! 4500: func_fatal_error "cannot determine absolute directory name of \`$dir'"
! 4501: dir="$absdir"
! 4502: ;;
! 4503: esac
! 4504: case "$deplibs " in
! 4505: *" -L$dir "*) ;;
! 4506: *)
! 4507: deplibs="$deplibs -L$dir"
! 4508: lib_search_path="$lib_search_path $dir"
! 4509: ;;
! 4510: esac
! 4511: case $host in
! 4512: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 4513: testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
! 4514: case :$dllsearchpath: in
! 4515: *":$dir:"*) ;;
! 4516: ::) dllsearchpath=$dir;;
! 4517: *) dllsearchpath="$dllsearchpath:$dir";;
! 4518: esac
! 4519: case :$dllsearchpath: in
! 4520: *":$testbindir:"*) ;;
! 4521: ::) dllsearchpath=$testbindir;;
! 4522: *) dllsearchpath="$dllsearchpath:$testbindir";;
! 4523: esac
! 4524: ;;
! 4525: esac
! 4526: continue
! 4527: ;;
! 4528:
! 4529: -l*)
! 4530: if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
! 4531: case $host in
! 4532: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
! 4533: # These systems don't actually have a C or math library (as such)
! 4534: continue
! 4535: ;;
! 4536: *-*-os2*)
! 4537: # These systems don't actually have a C library (as such)
! 4538: test "X$arg" = "X-lc" && continue
! 4539: ;;
! 4540: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 4541: # Do not include libc due to us having libc/libc_r.
! 4542: test "X$arg" = "X-lc" && continue
! 4543: ;;
! 4544: *-*-rhapsody* | *-*-darwin1.[012])
! 4545: # Rhapsody C and math libraries are in the System framework
! 4546: deplibs="$deplibs System.ltframework"
! 4547: continue
! 4548: ;;
! 4549: *-*-sco3.2v5* | *-*-sco5v6*)
! 4550: # Causes problems with __ctype
! 4551: test "X$arg" = "X-lc" && continue
! 4552: ;;
! 4553: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 4554: # Compiler inserts libc in the correct place for threads to work
! 4555: test "X$arg" = "X-lc" && continue
! 4556: ;;
! 4557: esac
! 4558: elif test "X$arg" = "X-lc_r"; then
! 4559: case $host in
! 4560: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 4561: # Do not include libc_r directly, use -pthread flag.
! 4562: continue
! 4563: ;;
! 4564: esac
! 4565: fi
! 4566: deplibs="$deplibs $arg"
! 4567: continue
! 4568: ;;
! 4569:
! 4570: -module)
! 4571: module=yes
! 4572: continue
! 4573: ;;
! 4574:
! 4575: # Tru64 UNIX uses -model [arg] to determine the layout of C++
! 4576: # classes, name mangling, and exception handling.
! 4577: # Darwin uses the -arch flag to determine output architecture.
! 4578: -model|-arch|-isysroot)
! 4579: compiler_flags="$compiler_flags $arg"
! 4580: func_append compile_command " $arg"
! 4581: func_append finalize_command " $arg"
! 4582: prev=xcompiler
! 4583: continue
! 4584: ;;
! 4585:
! 4586: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 4587: compiler_flags="$compiler_flags $arg"
! 4588: func_append compile_command " $arg"
! 4589: func_append finalize_command " $arg"
! 4590: case "$new_inherited_linker_flags " in
! 4591: *" $arg "*) ;;
! 4592: * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
! 4593: esac
! 4594: continue
! 4595: ;;
! 4596:
! 4597: -multi_module)
! 4598: single_module="${wl}-multi_module"
! 4599: continue
! 4600: ;;
! 4601:
! 4602: -no-fast-install)
! 4603: fast_install=no
! 4604: continue
! 4605: ;;
! 4606:
! 4607: -no-install)
! 4608: case $host in
! 4609: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
! 4610: # The PATH hackery in wrapper scripts is required on Windows
! 4611: # and Darwin in order for the loader to find any dlls it needs.
! 4612: func_warning "\`-no-install' is ignored for $host"
! 4613: func_warning "assuming \`-no-fast-install' instead"
! 4614: fast_install=no
! 4615: ;;
! 4616: *) no_install=yes ;;
! 4617: esac
! 4618: continue
! 4619: ;;
! 4620:
! 4621: -no-undefined)
! 4622: allow_undefined=no
! 4623: continue
! 4624: ;;
! 4625:
! 4626: -objectlist)
! 4627: prev=objectlist
! 4628: continue
! 4629: ;;
! 4630:
! 4631: -o) prev=output ;;
! 4632:
! 4633: -precious-files-regex)
! 4634: prev=precious_regex
! 4635: continue
! 4636: ;;
! 4637:
! 4638: -release)
! 4639: prev=release
! 4640: continue
! 4641: ;;
! 4642:
! 4643: -rpath)
! 4644: prev=rpath
! 4645: continue
! 4646: ;;
! 4647:
! 4648: -R)
! 4649: prev=xrpath
! 4650: continue
! 4651: ;;
! 4652:
! 4653: -R*)
! 4654: func_stripname '-R' '' "$arg"
! 4655: dir=$func_stripname_result
! 4656: # We need an absolute path.
! 4657: case $dir in
! 4658: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4659: *)
! 4660: func_fatal_error "only absolute run-paths are allowed"
! 4661: ;;
! 4662: esac
! 4663: case "$xrpath " in
! 4664: *" $dir "*) ;;
! 4665: *) xrpath="$xrpath $dir" ;;
! 4666: esac
! 4667: continue
! 4668: ;;
! 4669:
! 4670: -shared)
! 4671: # The effects of -shared are defined in a previous loop.
! 4672: continue
! 4673: ;;
! 4674:
! 4675: -shrext)
! 4676: prev=shrext
! 4677: continue
! 4678: ;;
! 4679:
! 4680: -static | -static-libtool-libs)
! 4681: # The effects of -static are defined in a previous loop.
! 4682: # We used to do the same as -all-static on platforms that
! 4683: # didn't have a PIC flag, but the assumption that the effects
! 4684: # would be equivalent was wrong. It would break on at least
! 4685: # Digital Unix and AIX.
! 4686: continue
! 4687: ;;
! 4688:
! 4689: -thread-safe)
! 4690: thread_safe=yes
! 4691: continue
! 4692: ;;
! 4693:
! 4694: -version-info)
! 4695: prev=vinfo
! 4696: continue
! 4697: ;;
! 4698:
! 4699: -version-number)
! 4700: prev=vinfo
! 4701: vinfo_number=yes
! 4702: continue
! 4703: ;;
! 4704:
! 4705: -weak)
! 4706: prev=weak
! 4707: continue
! 4708: ;;
! 4709:
! 4710: -Wc,*)
! 4711: func_stripname '-Wc,' '' "$arg"
! 4712: args=$func_stripname_result
! 4713: arg=
! 4714: save_ifs="$IFS"; IFS=','
! 4715: for flag in $args; do
! 4716: IFS="$save_ifs"
! 4717: func_quote_for_eval "$flag"
! 4718: arg="$arg $wl$func_quote_for_eval_result"
! 4719: compiler_flags="$compiler_flags $func_quote_for_eval_result"
! 4720: done
! 4721: IFS="$save_ifs"
! 4722: func_stripname ' ' '' "$arg"
! 4723: arg=$func_stripname_result
! 4724: ;;
! 4725:
! 4726: -Wl,*)
! 4727: func_stripname '-Wl,' '' "$arg"
! 4728: args=$func_stripname_result
! 4729: arg=
! 4730: save_ifs="$IFS"; IFS=','
! 4731: for flag in $args; do
! 4732: IFS="$save_ifs"
! 4733: func_quote_for_eval "$flag"
! 4734: arg="$arg $wl$func_quote_for_eval_result"
! 4735: compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
! 4736: linker_flags="$linker_flags $func_quote_for_eval_result"
! 4737: done
! 4738: IFS="$save_ifs"
! 4739: func_stripname ' ' '' "$arg"
! 4740: arg=$func_stripname_result
! 4741: ;;
! 4742:
! 4743: -Xcompiler)
! 4744: prev=xcompiler
! 4745: continue
! 4746: ;;
! 4747:
! 4748: -Xlinker)
! 4749: prev=xlinker
! 4750: continue
! 4751: ;;
! 4752:
! 4753: -XCClinker)
! 4754: prev=xcclinker
! 4755: continue
! 4756: ;;
! 4757:
! 4758: # -msg_* for osf cc
! 4759: -msg_*)
! 4760: func_quote_for_eval "$arg"
! 4761: arg="$func_quote_for_eval_result"
! 4762: ;;
! 4763:
! 4764: # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
! 4765: # -r[0-9][0-9]* specifies the processor on the SGI compiler
! 4766: # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
! 4767: # +DA*, +DD* enable 64-bit mode on the HP compiler
! 4768: # -q* pass through compiler args for the IBM compiler
! 4769: # -m*, -t[45]*, -txscale* pass through architecture-specific
! 4770: # compiler args for GCC
! 4771: # -F/path gives path to uninstalled frameworks, gcc on darwin
! 4772: # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
! 4773: # @file GCC response files
! 4774: -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
! 4775: -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
! 4776: func_quote_for_eval "$arg"
! 4777: arg="$func_quote_for_eval_result"
! 4778: func_append compile_command " $arg"
! 4779: func_append finalize_command " $arg"
! 4780: compiler_flags="$compiler_flags $arg"
! 4781: continue
! 4782: ;;
! 4783:
! 4784: # Some other compiler flag.
! 4785: -* | +*)
! 4786: func_quote_for_eval "$arg"
! 4787: arg="$func_quote_for_eval_result"
! 4788: ;;
! 4789:
! 4790: *.$objext)
! 4791: # A standard object.
! 4792: objs="$objs $arg"
! 4793: ;;
! 4794:
! 4795: *.lo)
! 4796: # A libtool-controlled object.
! 4797:
! 4798: # Check to see that this really is a libtool object.
! 4799: if func_lalib_unsafe_p "$arg"; then
! 4800: pic_object=
! 4801: non_pic_object=
! 4802:
! 4803: # Read the .lo file
! 4804: func_source "$arg"
! 4805:
! 4806: if test -z "$pic_object" ||
! 4807: test -z "$non_pic_object" ||
! 4808: test "$pic_object" = none &&
! 4809: test "$non_pic_object" = none; then
! 4810: func_fatal_error "cannot find name of object for \`$arg'"
! 4811: fi
! 4812:
! 4813: # Extract subdirectory from the argument.
! 4814: func_dirname "$arg" "/" ""
! 4815: xdir="$func_dirname_result"
! 4816:
! 4817: if test "$pic_object" != none; then
! 4818: # Prepend the subdirectory the object is found in.
! 4819: pic_object="$xdir$pic_object"
! 4820:
! 4821: if test "$prev" = dlfiles; then
! 4822: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 4823: dlfiles="$dlfiles $pic_object"
! 4824: prev=
! 4825: continue
! 4826: else
! 4827: # If libtool objects are unsupported, then we need to preload.
! 4828: prev=dlprefiles
! 4829: fi
! 4830: fi
! 4831:
! 4832: # CHECK ME: I think I busted this. -Ossama
! 4833: if test "$prev" = dlprefiles; then
! 4834: # Preload the old-style object.
! 4835: dlprefiles="$dlprefiles $pic_object"
! 4836: prev=
! 4837: fi
! 4838:
! 4839: # A PIC object.
! 4840: func_append libobjs " $pic_object"
! 4841: arg="$pic_object"
! 4842: fi
! 4843:
! 4844: # Non-PIC object.
! 4845: if test "$non_pic_object" != none; then
! 4846: # Prepend the subdirectory the object is found in.
! 4847: non_pic_object="$xdir$non_pic_object"
! 4848:
! 4849: # A standard non-PIC object
! 4850: func_append non_pic_objects " $non_pic_object"
! 4851: if test -z "$pic_object" || test "$pic_object" = none ; then
! 4852: arg="$non_pic_object"
! 4853: fi
! 4854: else
! 4855: # If the PIC object exists, use it instead.
! 4856: # $xdir was prepended to $pic_object above.
! 4857: non_pic_object="$pic_object"
! 4858: func_append non_pic_objects " $non_pic_object"
! 4859: fi
! 4860: else
! 4861: # Only an error if not doing a dry-run.
! 4862: if $opt_dry_run; then
! 4863: # Extract subdirectory from the argument.
! 4864: func_dirname "$arg" "/" ""
! 4865: xdir="$func_dirname_result"
! 4866:
! 4867: func_lo2o "$arg"
! 4868: pic_object=$xdir$objdir/$func_lo2o_result
! 4869: non_pic_object=$xdir$func_lo2o_result
! 4870: func_append libobjs " $pic_object"
! 4871: func_append non_pic_objects " $non_pic_object"
! 4872: else
! 4873: func_fatal_error "\`$arg' is not a valid libtool object"
! 4874: fi
! 4875: fi
! 4876: ;;
! 4877:
! 4878: *.$libext)
! 4879: # An archive.
! 4880: deplibs="$deplibs $arg"
! 4881: old_deplibs="$old_deplibs $arg"
! 4882: continue
! 4883: ;;
! 4884:
! 4885: *.la)
! 4886: # A libtool-controlled library.
! 4887:
! 4888: if test "$prev" = dlfiles; then
! 4889: # This library was specified with -dlopen.
! 4890: dlfiles="$dlfiles $arg"
! 4891: prev=
! 4892: elif test "$prev" = dlprefiles; then
! 4893: # The library was specified with -dlpreopen.
! 4894: dlprefiles="$dlprefiles $arg"
! 4895: prev=
! 4896: else
! 4897: deplibs="$deplibs $arg"
! 4898: fi
! 4899: continue
! 4900: ;;
! 4901:
! 4902: # Some other compiler argument.
! 4903: *)
! 4904: # Unknown arguments in both finalize_command and compile_command need
! 4905: # to be aesthetically quoted because they are evaled later.
! 4906: func_quote_for_eval "$arg"
! 4907: arg="$func_quote_for_eval_result"
! 4908: ;;
! 4909: esac # arg
! 4910:
! 4911: # Now actually substitute the argument into the commands.
! 4912: if test -n "$arg"; then
! 4913: func_append compile_command " $arg"
! 4914: func_append finalize_command " $arg"
! 4915: fi
! 4916: done # argument parsing loop
! 4917:
! 4918: test -n "$prev" && \
! 4919: func_fatal_help "the \`$prevarg' option requires an argument"
! 4920:
! 4921: if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
! 4922: eval arg=\"$export_dynamic_flag_spec\"
! 4923: func_append compile_command " $arg"
! 4924: func_append finalize_command " $arg"
! 4925: fi
! 4926:
! 4927: oldlibs=
! 4928: # calculate the name of the file, without its directory
! 4929: func_basename "$output"
! 4930: outputname="$func_basename_result"
! 4931: libobjs_save="$libobjs"
! 4932:
! 4933: if test -n "$shlibpath_var"; then
! 4934: # get the directories listed in $shlibpath_var
! 4935: eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
! 4936: else
! 4937: shlib_search_path=
! 4938: fi
! 4939: eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
! 4940: eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
! 4941:
! 4942: func_dirname "$output" "/" ""
! 4943: output_objdir="$func_dirname_result$objdir"
! 4944: # Create the object directory.
! 4945: func_mkdir_p "$output_objdir"
! 4946:
! 4947: # Determine the type of output
! 4948: case $output in
! 4949: "")
! 4950: func_fatal_help "you must specify an output file"
! 4951: ;;
! 4952: *.$libext) linkmode=oldlib ;;
! 4953: *.lo | *.$objext) linkmode=obj ;;
! 4954: *.la) linkmode=lib ;;
! 4955: *) linkmode=prog ;; # Anything else should be a program.
! 4956: esac
! 4957:
! 4958: specialdeplibs=
! 4959:
! 4960: libs=
! 4961: # Find all interdependent deplibs by searching for libraries
! 4962: # that are linked more than once (e.g. -la -lb -la)
! 4963: for deplib in $deplibs; do
! 4964: if $opt_duplicate_deps ; then
! 4965: case "$libs " in
! 4966: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 4967: esac
! 4968: fi
! 4969: libs="$libs $deplib"
! 4970: done
! 4971:
! 4972: if test "$linkmode" = lib; then
! 4973: libs="$predeps $libs $compiler_lib_search_path $postdeps"
! 4974:
! 4975: # Compute libraries that are listed more than once in $predeps
! 4976: # $postdeps and mark them as special (i.e., whose duplicates are
! 4977: # not to be eliminated).
! 4978: pre_post_deps=
! 4979: if $opt_duplicate_compiler_generated_deps; then
! 4980: for pre_post_dep in $predeps $postdeps; do
! 4981: case "$pre_post_deps " in
! 4982: *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
! 4983: esac
! 4984: pre_post_deps="$pre_post_deps $pre_post_dep"
! 4985: done
! 4986: fi
! 4987: pre_post_deps=
! 4988: fi
! 4989:
! 4990: deplibs=
! 4991: newdependency_libs=
! 4992: newlib_search_path=
! 4993: need_relink=no # whether we're linking any uninstalled libtool libraries
! 4994: notinst_deplibs= # not-installed libtool libraries
! 4995: notinst_path= # paths that contain not-installed libtool libraries
! 4996:
! 4997: case $linkmode in
! 4998: lib)
! 4999: passes="conv dlpreopen link"
! 5000: for file in $dlfiles $dlprefiles; do
! 5001: case $file in
! 5002: *.la) ;;
! 5003: *)
! 5004: func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
! 5005: ;;
! 5006: esac
! 5007: done
! 5008: ;;
! 5009: prog)
! 5010: compile_deplibs=
! 5011: finalize_deplibs=
! 5012: alldeplibs=no
! 5013: newdlfiles=
! 5014: newdlprefiles=
! 5015: passes="conv scan dlopen dlpreopen link"
! 5016: ;;
! 5017: *) passes="conv"
! 5018: ;;
! 5019: esac
! 5020:
! 5021: for pass in $passes; do
! 5022: # The preopen pass in lib mode reverses $deplibs; put it back here
! 5023: # so that -L comes before libs that need it for instance...
! 5024: if test "$linkmode,$pass" = "lib,link"; then
! 5025: ## FIXME: Find the place where the list is rebuilt in the wrong
! 5026: ## order, and fix it there properly
! 5027: tmp_deplibs=
! 5028: for deplib in $deplibs; do
! 5029: tmp_deplibs="$deplib $tmp_deplibs"
! 5030: done
! 5031: deplibs="$tmp_deplibs"
! 5032: fi
! 5033:
! 5034: if test "$linkmode,$pass" = "lib,link" ||
! 5035: test "$linkmode,$pass" = "prog,scan"; then
! 5036: libs="$deplibs"
! 5037: deplibs=
! 5038: fi
! 5039: if test "$linkmode" = prog; then
! 5040: case $pass in
! 5041: dlopen) libs="$dlfiles" ;;
! 5042: dlpreopen) libs="$dlprefiles" ;;
! 5043: link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
! 5044: esac
! 5045: fi
! 5046: if test "$linkmode,$pass" = "lib,dlpreopen"; then
! 5047: # Collect and forward deplibs of preopened libtool libs
! 5048: for lib in $dlprefiles; do
! 5049: # Ignore non-libtool-libs
! 5050: dependency_libs=
! 5051: case $lib in
! 5052: *.la) func_source "$lib" ;;
! 5053: esac
! 5054:
! 5055: # Collect preopened libtool deplibs, except any this library
! 5056: # has declared as weak libs
! 5057: for deplib in $dependency_libs; do
! 5058: deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
! 5059: case " $weak_libs " in
! 5060: *" $deplib_base "*) ;;
! 5061: *) deplibs="$deplibs $deplib" ;;
! 5062: esac
! 5063: done
! 5064: done
! 5065: libs="$dlprefiles"
! 5066: fi
! 5067: if test "$pass" = dlopen; then
! 5068: # Collect dlpreopened libraries
! 5069: save_deplibs="$deplibs"
! 5070: deplibs=
! 5071: fi
! 5072:
! 5073: for deplib in $libs; do
! 5074: lib=
! 5075: found=no
! 5076: case $deplib in
! 5077: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 5078: if test "$linkmode,$pass" = "prog,link"; then
! 5079: compile_deplibs="$deplib $compile_deplibs"
! 5080: finalize_deplibs="$deplib $finalize_deplibs"
! 5081: else
! 5082: compiler_flags="$compiler_flags $deplib"
! 5083: if test "$linkmode" = lib ; then
! 5084: case "$new_inherited_linker_flags " in
! 5085: *" $deplib "*) ;;
! 5086: * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
! 5087: esac
! 5088: fi
! 5089: fi
! 5090: continue
! 5091: ;;
! 5092: -l*)
! 5093: if test "$linkmode" != lib && test "$linkmode" != prog; then
! 5094: func_warning "\`-l' is ignored for archives/objects"
! 5095: continue
! 5096: fi
! 5097: func_stripname '-l' '' "$deplib"
! 5098: name=$func_stripname_result
! 5099: if test "$linkmode" = lib; then
! 5100: searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
! 5101: else
! 5102: searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
! 5103: fi
! 5104: for searchdir in $searchdirs; do
! 5105: for search_ext in .la $std_shrext .so .a; do
! 5106: # Search the libtool library
! 5107: lib="$searchdir/lib${name}${search_ext}"
! 5108: if test -f "$lib"; then
! 5109: if test "$search_ext" = ".la"; then
! 5110: found=yes
! 5111: else
! 5112: found=no
! 5113: fi
! 5114: break 2
! 5115: fi
! 5116: done
! 5117: done
! 5118: if test "$found" != yes; then
! 5119: # deplib doesn't seem to be a libtool library
! 5120: if test "$linkmode,$pass" = "prog,link"; then
! 5121: compile_deplibs="$deplib $compile_deplibs"
! 5122: finalize_deplibs="$deplib $finalize_deplibs"
! 5123: else
! 5124: deplibs="$deplib $deplibs"
! 5125: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 5126: fi
! 5127: continue
! 5128: else # deplib is a libtool library
! 5129: # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
! 5130: # We need to do some special things here, and not later.
! 5131: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 5132: case " $predeps $postdeps " in
! 5133: *" $deplib "*)
! 5134: if func_lalib_p "$lib"; then
! 5135: library_names=
! 5136: old_library=
! 5137: func_source "$lib"
! 5138: for l in $old_library $library_names; do
! 5139: ll="$l"
! 5140: done
! 5141: if test "X$ll" = "X$old_library" ; then # only static version available
! 5142: found=no
! 5143: func_dirname "$lib" "" "."
! 5144: ladir="$func_dirname_result"
! 5145: lib=$ladir/$old_library
! 5146: if test "$linkmode,$pass" = "prog,link"; then
! 5147: compile_deplibs="$deplib $compile_deplibs"
! 5148: finalize_deplibs="$deplib $finalize_deplibs"
! 5149: else
! 5150: deplibs="$deplib $deplibs"
! 5151: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 5152: fi
! 5153: continue
! 5154: fi
! 5155: fi
! 5156: ;;
! 5157: *) ;;
! 5158: esac
! 5159: fi
! 5160: fi
! 5161: ;; # -l
! 5162: *.ltframework)
! 5163: if test "$linkmode,$pass" = "prog,link"; then
! 5164: compile_deplibs="$deplib $compile_deplibs"
! 5165: finalize_deplibs="$deplib $finalize_deplibs"
! 5166: else
! 5167: deplibs="$deplib $deplibs"
! 5168: if test "$linkmode" = lib ; then
! 5169: case "$new_inherited_linker_flags " in
! 5170: *" $deplib "*) ;;
! 5171: * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
! 5172: esac
! 5173: fi
! 5174: fi
! 5175: continue
! 5176: ;;
! 5177: -L*)
! 5178: case $linkmode in
! 5179: lib)
! 5180: deplibs="$deplib $deplibs"
! 5181: test "$pass" = conv && continue
! 5182: newdependency_libs="$deplib $newdependency_libs"
! 5183: func_stripname '-L' '' "$deplib"
! 5184: newlib_search_path="$newlib_search_path $func_stripname_result"
! 5185: ;;
! 5186: prog)
! 5187: if test "$pass" = conv; then
! 5188: deplibs="$deplib $deplibs"
! 5189: continue
! 5190: fi
! 5191: if test "$pass" = scan; then
! 5192: deplibs="$deplib $deplibs"
! 5193: else
! 5194: compile_deplibs="$deplib $compile_deplibs"
! 5195: finalize_deplibs="$deplib $finalize_deplibs"
! 5196: fi
! 5197: func_stripname '-L' '' "$deplib"
! 5198: newlib_search_path="$newlib_search_path $func_stripname_result"
! 5199: ;;
! 5200: *)
! 5201: func_warning "\`-L' is ignored for archives/objects"
! 5202: ;;
! 5203: esac # linkmode
! 5204: continue
! 5205: ;; # -L
! 5206: -R*)
! 5207: if test "$pass" = link; then
! 5208: func_stripname '-R' '' "$deplib"
! 5209: dir=$func_stripname_result
! 5210: # Make sure the xrpath contains only unique directories.
! 5211: case "$xrpath " in
! 5212: *" $dir "*) ;;
! 5213: *) xrpath="$xrpath $dir" ;;
! 5214: esac
! 5215: fi
! 5216: deplibs="$deplib $deplibs"
! 5217: continue
! 5218: ;;
! 5219: *.la) lib="$deplib" ;;
! 5220: *.$libext)
! 5221: if test "$pass" = conv; then
! 5222: deplibs="$deplib $deplibs"
! 5223: continue
! 5224: fi
! 5225: case $linkmode in
! 5226: lib)
! 5227: # Linking convenience modules into shared libraries is allowed,
! 5228: # but linking other static libraries is non-portable.
! 5229: case " $dlpreconveniencelibs " in
! 5230: *" $deplib "*) ;;
! 5231: *)
! 5232: valid_a_lib=no
! 5233: case $deplibs_check_method in
! 5234: match_pattern*)
! 5235: set dummy $deplibs_check_method; shift
! 5236: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 5237: if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
! 5238: | $EGREP "$match_pattern_regex" > /dev/null; then
! 5239: valid_a_lib=yes
! 5240: fi
! 5241: ;;
! 5242: pass_all)
! 5243: valid_a_lib=yes
! 5244: ;;
! 5245: esac
! 5246: if test "$valid_a_lib" != yes; then
! 5247: $ECHO
! 5248: $ECHO "*** Warning: Trying to link with static lib archive $deplib."
! 5249: $ECHO "*** I have the capability to make that library automatically link in when"
! 5250: $ECHO "*** you link to this library. But I can only do this if you have a"
! 5251: $ECHO "*** shared version of the library, which you do not appear to have"
! 5252: $ECHO "*** because the file extensions .$libext of this argument makes me believe"
! 5253: $ECHO "*** that it is just a static archive that I should not use here."
! 5254: else
! 5255: $ECHO
! 5256: $ECHO "*** Warning: Linking the shared library $output against the"
! 5257: $ECHO "*** static library $deplib is not portable!"
! 5258: deplibs="$deplib $deplibs"
! 5259: fi
! 5260: ;;
! 5261: esac
! 5262: continue
! 5263: ;;
! 5264: prog)
! 5265: if test "$pass" != link; then
! 5266: deplibs="$deplib $deplibs"
! 5267: else
! 5268: compile_deplibs="$deplib $compile_deplibs"
! 5269: finalize_deplibs="$deplib $finalize_deplibs"
! 5270: fi
! 5271: continue
! 5272: ;;
! 5273: esac # linkmode
! 5274: ;; # *.$libext
! 5275: *.lo | *.$objext)
! 5276: if test "$pass" = conv; then
! 5277: deplibs="$deplib $deplibs"
! 5278: elif test "$linkmode" = prog; then
! 5279: if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
! 5280: # If there is no dlopen support or we're linking statically,
! 5281: # we need to preload.
! 5282: newdlprefiles="$newdlprefiles $deplib"
! 5283: compile_deplibs="$deplib $compile_deplibs"
! 5284: finalize_deplibs="$deplib $finalize_deplibs"
! 5285: else
! 5286: newdlfiles="$newdlfiles $deplib"
! 5287: fi
! 5288: fi
! 5289: continue
! 5290: ;;
! 5291: %DEPLIBS%)
! 5292: alldeplibs=yes
! 5293: continue
! 5294: ;;
! 5295: esac # case $deplib
! 5296:
! 5297: if test "$found" = yes || test -f "$lib"; then :
! 5298: else
! 5299: func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
! 5300: fi
! 5301:
! 5302: # Check to see that this really is a libtool archive.
! 5303: func_lalib_unsafe_p "$lib" \
! 5304: || func_fatal_error "\`$lib' is not a valid libtool archive"
! 5305:
! 5306: func_dirname "$lib" "" "."
! 5307: ladir="$func_dirname_result"
! 5308:
! 5309: dlname=
! 5310: dlopen=
! 5311: dlpreopen=
! 5312: libdir=
! 5313: library_names=
! 5314: old_library=
! 5315: inherited_linker_flags=
! 5316: # If the library was installed with an old release of libtool,
! 5317: # it will not redefine variables installed, or shouldnotlink
! 5318: installed=yes
! 5319: shouldnotlink=no
! 5320: avoidtemprpath=
! 5321:
! 5322:
! 5323: # Read the .la file
! 5324: func_source "$lib"
! 5325:
! 5326: # Convert "-framework foo" to "foo.ltframework"
! 5327: if test -n "$inherited_linker_flags"; then
! 5328: tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
! 5329: for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
! 5330: case " $new_inherited_linker_flags " in
! 5331: *" $tmp_inherited_linker_flag "*) ;;
! 5332: *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
! 5333: esac
! 5334: done
! 5335: fi
! 5336: dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 5337: if test "$linkmode,$pass" = "lib,link" ||
! 5338: test "$linkmode,$pass" = "prog,scan" ||
! 5339: { test "$linkmode" != prog && test "$linkmode" != lib; }; then
! 5340: test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
! 5341: test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
! 5342: fi
! 5343:
! 5344: if test "$pass" = conv; then
! 5345: # Only check for convenience libraries
! 5346: deplibs="$lib $deplibs"
! 5347: if test -z "$libdir"; then
! 5348: if test -z "$old_library"; then
! 5349: func_fatal_error "cannot find name of link library for \`$lib'"
! 5350: fi
! 5351: # It is a libtool convenience library, so add in its objects.
! 5352: convenience="$convenience $ladir/$objdir/$old_library"
! 5353: old_convenience="$old_convenience $ladir/$objdir/$old_library"
! 5354: elif test "$linkmode" != prog && test "$linkmode" != lib; then
! 5355: func_fatal_error "\`$lib' is not a convenience library"
! 5356: fi
! 5357: tmp_libs=
! 5358: for deplib in $dependency_libs; do
! 5359: deplibs="$deplib $deplibs"
! 5360: if $opt_duplicate_deps ; then
! 5361: case "$tmp_libs " in
! 5362: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5363: esac
! 5364: fi
! 5365: tmp_libs="$tmp_libs $deplib"
! 5366: done
! 5367: continue
! 5368: fi # $pass = conv
! 5369:
! 5370:
! 5371: # Get the name of the library we link against.
! 5372: linklib=
! 5373: for l in $old_library $library_names; do
! 5374: linklib="$l"
! 5375: done
! 5376: if test -z "$linklib"; then
! 5377: func_fatal_error "cannot find name of link library for \`$lib'"
! 5378: fi
! 5379:
! 5380: # This library was specified with -dlopen.
! 5381: if test "$pass" = dlopen; then
! 5382: if test -z "$libdir"; then
! 5383: func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
! 5384: fi
! 5385: if test -z "$dlname" ||
! 5386: test "$dlopen_support" != yes ||
! 5387: test "$build_libtool_libs" = no; then
! 5388: # If there is no dlname, no dlopen support or we're linking
! 5389: # statically, we need to preload. We also need to preload any
! 5390: # dependent libraries so libltdl's deplib preloader doesn't
! 5391: # bomb out in the load deplibs phase.
! 5392: dlprefiles="$dlprefiles $lib $dependency_libs"
! 5393: else
! 5394: newdlfiles="$newdlfiles $lib"
! 5395: fi
! 5396: continue
! 5397: fi # $pass = dlopen
! 5398:
! 5399: # We need an absolute path.
! 5400: case $ladir in
! 5401: [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
! 5402: *)
! 5403: abs_ladir=`cd "$ladir" && pwd`
! 5404: if test -z "$abs_ladir"; then
! 5405: func_warning "cannot determine absolute directory name of \`$ladir'"
! 5406: func_warning "passing it literally to the linker, although it might fail"
! 5407: abs_ladir="$ladir"
! 5408: fi
! 5409: ;;
! 5410: esac
! 5411: func_basename "$lib"
! 5412: laname="$func_basename_result"
! 5413:
! 5414: # Find the relevant object directory and library name.
! 5415: if test "X$installed" = Xyes; then
! 5416: if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 5417: func_warning "library \`$lib' was moved."
! 5418: dir="$ladir"
! 5419: absdir="$abs_ladir"
! 5420: libdir="$abs_ladir"
! 5421: else
! 5422: dir="$libdir"
! 5423: absdir="$libdir"
! 5424: fi
! 5425: test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
! 5426: else
! 5427: if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 5428: dir="$ladir"
! 5429: absdir="$abs_ladir"
! 5430: # Remove this search path later
! 5431: notinst_path="$notinst_path $abs_ladir"
! 5432: else
! 5433: dir="$ladir/$objdir"
! 5434: absdir="$abs_ladir/$objdir"
! 5435: # Remove this search path later
! 5436: notinst_path="$notinst_path $abs_ladir"
! 5437: fi
! 5438: fi # $installed = yes
! 5439: func_stripname 'lib' '.la' "$laname"
! 5440: name=$func_stripname_result
! 5441:
! 5442: # This library was specified with -dlpreopen.
! 5443: if test "$pass" = dlpreopen; then
! 5444: if test -z "$libdir" && test "$linkmode" = prog; then
! 5445: func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
! 5446: fi
! 5447: # Prefer using a static library (so that no silly _DYNAMIC symbols
! 5448: # are required to link).
! 5449: if test -n "$old_library"; then
! 5450: newdlprefiles="$newdlprefiles $dir/$old_library"
! 5451: # Keep a list of preopened convenience libraries to check
! 5452: # that they are being used correctly in the link pass.
! 5453: test -z "$libdir" && \
! 5454: dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
! 5455: # Otherwise, use the dlname, so that lt_dlopen finds it.
! 5456: elif test -n "$dlname"; then
! 5457: newdlprefiles="$newdlprefiles $dir/$dlname"
! 5458: else
! 5459: newdlprefiles="$newdlprefiles $dir/$linklib"
! 5460: fi
! 5461: fi # $pass = dlpreopen
! 5462:
! 5463: if test -z "$libdir"; then
! 5464: # Link the convenience library
! 5465: if test "$linkmode" = lib; then
! 5466: deplibs="$dir/$old_library $deplibs"
! 5467: elif test "$linkmode,$pass" = "prog,link"; then
! 5468: compile_deplibs="$dir/$old_library $compile_deplibs"
! 5469: finalize_deplibs="$dir/$old_library $finalize_deplibs"
! 5470: else
! 5471: deplibs="$lib $deplibs" # used for prog,scan pass
! 5472: fi
! 5473: continue
! 5474: fi
! 5475:
! 5476:
! 5477: if test "$linkmode" = prog && test "$pass" != link; then
! 5478: newlib_search_path="$newlib_search_path $ladir"
! 5479: deplibs="$lib $deplibs"
! 5480:
! 5481: linkalldeplibs=no
! 5482: if test "$link_all_deplibs" != no || test -z "$library_names" ||
! 5483: test "$build_libtool_libs" = no; then
! 5484: linkalldeplibs=yes
! 5485: fi
! 5486:
! 5487: tmp_libs=
! 5488: for deplib in $dependency_libs; do
! 5489: case $deplib in
! 5490: -L*) func_stripname '-L' '' "$deplib"
! 5491: newlib_search_path="$newlib_search_path $func_stripname_result"
! 5492: ;;
! 5493: esac
! 5494: # Need to link against all dependency_libs?
! 5495: if test "$linkalldeplibs" = yes; then
! 5496: deplibs="$deplib $deplibs"
! 5497: else
! 5498: # Need to hardcode shared library paths
! 5499: # or/and link against static libraries
! 5500: newdependency_libs="$deplib $newdependency_libs"
! 5501: fi
! 5502: if $opt_duplicate_deps ; then
! 5503: case "$tmp_libs " in
! 5504: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5505: esac
! 5506: fi
! 5507: tmp_libs="$tmp_libs $deplib"
! 5508: done # for deplib
! 5509: continue
! 5510: fi # $linkmode = prog...
! 5511:
! 5512: if test "$linkmode,$pass" = "prog,link"; then
! 5513: if test -n "$library_names" &&
! 5514: { { test "$prefer_static_libs" = no ||
! 5515: test "$prefer_static_libs,$installed" = "built,yes"; } ||
! 5516: test -z "$old_library"; }; then
! 5517: # We need to hardcode the library path
! 5518: if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
! 5519: # Make sure the rpath contains only unique directories.
! 5520: case "$temp_rpath:" in
! 5521: *"$absdir:"*) ;;
! 5522: *) temp_rpath="$temp_rpath$absdir:" ;;
! 5523: esac
! 5524: fi
! 5525:
! 5526: # Hardcode the library path.
! 5527: # Skip directories that are in the system default run-time
! 5528: # search path.
! 5529: case " $sys_lib_dlsearch_path " in
! 5530: *" $absdir "*) ;;
! 5531: *)
! 5532: case "$compile_rpath " in
! 5533: *" $absdir "*) ;;
! 5534: *) compile_rpath="$compile_rpath $absdir"
! 5535: esac
! 5536: ;;
! 5537: esac
! 5538: case " $sys_lib_dlsearch_path " in
! 5539: *" $libdir "*) ;;
! 5540: *)
! 5541: case "$finalize_rpath " in
! 5542: *" $libdir "*) ;;
! 5543: *) finalize_rpath="$finalize_rpath $libdir"
! 5544: esac
! 5545: ;;
! 5546: esac
! 5547: fi # $linkmode,$pass = prog,link...
! 5548:
! 5549: if test "$alldeplibs" = yes &&
! 5550: { test "$deplibs_check_method" = pass_all ||
! 5551: { test "$build_libtool_libs" = yes &&
! 5552: test -n "$library_names"; }; }; then
! 5553: # We only need to search for static libraries
! 5554: continue
! 5555: fi
! 5556: fi
! 5557:
! 5558: link_static=no # Whether the deplib will be linked statically
! 5559: use_static_libs=$prefer_static_libs
! 5560: if test "$use_static_libs" = built && test "$installed" = yes; then
! 5561: use_static_libs=no
! 5562: fi
! 5563: if test -n "$library_names" &&
! 5564: { test "$use_static_libs" = no || test -z "$old_library"; }; then
! 5565: case $host in
! 5566: *cygwin* | *mingw* | *cegcc*)
! 5567: # No point in relinking DLLs because paths are not encoded
! 5568: notinst_deplibs="$notinst_deplibs $lib"
! 5569: need_relink=no
! 5570: ;;
! 5571: *)
! 5572: if test "$installed" = no; then
! 5573: notinst_deplibs="$notinst_deplibs $lib"
! 5574: need_relink=yes
! 5575: fi
! 5576: ;;
! 5577: esac
! 5578: # This is a shared library
! 5579:
! 5580: # Warn about portability, can't link against -module's on some
! 5581: # systems (darwin). Don't bleat about dlopened modules though!
! 5582: dlopenmodule=""
! 5583: for dlpremoduletest in $dlprefiles; do
! 5584: if test "X$dlpremoduletest" = "X$lib"; then
! 5585: dlopenmodule="$dlpremoduletest"
! 5586: break
! 5587: fi
! 5588: done
! 5589: if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
! 5590: $ECHO
! 5591: if test "$linkmode" = prog; then
! 5592: $ECHO "*** Warning: Linking the executable $output against the loadable module"
! 5593: else
! 5594: $ECHO "*** Warning: Linking the shared library $output against the loadable module"
! 5595: fi
! 5596: $ECHO "*** $linklib is not portable!"
! 5597: fi
! 5598: if test "$linkmode" = lib &&
! 5599: test "$hardcode_into_libs" = yes; then
! 5600: # Hardcode the library path.
! 5601: # Skip directories that are in the system default run-time
! 5602: # search path.
! 5603: case " $sys_lib_dlsearch_path " in
! 5604: *" $absdir "*) ;;
! 5605: *)
! 5606: case "$compile_rpath " in
! 5607: *" $absdir "*) ;;
! 5608: *) compile_rpath="$compile_rpath $absdir"
! 5609: esac
! 5610: ;;
! 5611: esac
! 5612: case " $sys_lib_dlsearch_path " in
! 5613: *" $libdir "*) ;;
! 5614: *)
! 5615: case "$finalize_rpath " in
! 5616: *" $libdir "*) ;;
! 5617: *) finalize_rpath="$finalize_rpath $libdir"
! 5618: esac
! 5619: ;;
! 5620: esac
! 5621: fi
! 5622:
! 5623: if test -n "$old_archive_from_expsyms_cmds"; then
! 5624: # figure out the soname
! 5625: set dummy $library_names
! 5626: shift
! 5627: realname="$1"
! 5628: shift
! 5629: libname=`eval "\\$ECHO \"$libname_spec\""`
! 5630: # use dlname if we got it. it's perfectly good, no?
! 5631: if test -n "$dlname"; then
! 5632: soname="$dlname"
! 5633: elif test -n "$soname_spec"; then
! 5634: # bleh windows
! 5635: case $host in
! 5636: *cygwin* | mingw* | *cegcc*)
! 5637: func_arith $current - $age
! 5638: major=$func_arith_result
! 5639: versuffix="-$major"
! 5640: ;;
! 5641: esac
! 5642: eval soname=\"$soname_spec\"
! 5643: else
! 5644: soname="$realname"
! 5645: fi
! 5646:
! 5647: # Make a new name for the extract_expsyms_cmds to use
! 5648: soroot="$soname"
! 5649: func_basename "$soroot"
! 5650: soname="$func_basename_result"
! 5651: func_stripname 'lib' '.dll' "$soname"
! 5652: newlib=libimp-$func_stripname_result.a
! 5653:
! 5654: # If the library has no export list, then create one now
! 5655: if test -f "$output_objdir/$soname-def"; then :
! 5656: else
! 5657: func_verbose "extracting exported symbol list from \`$soname'"
! 5658: func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
! 5659: fi
! 5660:
! 5661: # Create $newlib
! 5662: if test -f "$output_objdir/$newlib"; then :; else
! 5663: func_verbose "generating import library for \`$soname'"
! 5664: func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
! 5665: fi
! 5666: # make sure the library variables are pointing to the new library
! 5667: dir=$output_objdir
! 5668: linklib=$newlib
! 5669: fi # test -n "$old_archive_from_expsyms_cmds"
! 5670:
! 5671: if test "$linkmode" = prog || test "$mode" != relink; then
! 5672: add_shlibpath=
! 5673: add_dir=
! 5674: add=
! 5675: lib_linked=yes
! 5676: case $hardcode_action in
! 5677: immediate | unsupported)
! 5678: if test "$hardcode_direct" = no; then
! 5679: add="$dir/$linklib"
! 5680: case $host in
! 5681: *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
! 5682: *-*-sysv4*uw2*) add_dir="-L$dir" ;;
! 5683: *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
! 5684: *-*-unixware7*) add_dir="-L$dir" ;;
! 5685: *-*-darwin* )
! 5686: # if the lib is a (non-dlopened) module then we can not
! 5687: # link against it, someone is ignoring the earlier warnings
! 5688: if /usr/bin/file -L $add 2> /dev/null |
! 5689: $GREP ": [^:]* bundle" >/dev/null ; then
! 5690: if test "X$dlopenmodule" != "X$lib"; then
! 5691: $ECHO "*** Warning: lib $linklib is a module, not a shared library"
! 5692: if test -z "$old_library" ; then
! 5693: $ECHO
! 5694: $ECHO "*** And there doesn't seem to be a static archive available"
! 5695: $ECHO "*** The link will probably fail, sorry"
! 5696: else
! 5697: add="$dir/$old_library"
! 5698: fi
! 5699: elif test -n "$old_library"; then
! 5700: add="$dir/$old_library"
! 5701: fi
! 5702: fi
! 5703: esac
! 5704: elif test "$hardcode_minus_L" = no; then
! 5705: case $host in
! 5706: *-*-sunos*) add_shlibpath="$dir" ;;
! 5707: esac
! 5708: add_dir="-L$dir"
! 5709: add="-l$name"
! 5710: elif test "$hardcode_shlibpath_var" = no; then
! 5711: add_shlibpath="$dir"
! 5712: add="-l$name"
! 5713: else
! 5714: lib_linked=no
! 5715: fi
! 5716: ;;
! 5717: relink)
! 5718: if test "$hardcode_direct" = yes &&
! 5719: test "$hardcode_direct_absolute" = no; then
! 5720: add="$dir/$linklib"
! 5721: elif test "$hardcode_minus_L" = yes; then
! 5722: add_dir="-L$dir"
! 5723: # Try looking first in the location we're being installed to.
! 5724: if test -n "$inst_prefix_dir"; then
! 5725: case $libdir in
! 5726: [\\/]*)
! 5727: add_dir="$add_dir -L$inst_prefix_dir$libdir"
! 5728: ;;
! 5729: esac
! 5730: fi
! 5731: add="-l$name"
! 5732: elif test "$hardcode_shlibpath_var" = yes; then
! 5733: add_shlibpath="$dir"
! 5734: add="-l$name"
! 5735: else
! 5736: lib_linked=no
! 5737: fi
! 5738: ;;
! 5739: *) lib_linked=no ;;
! 5740: esac
! 5741:
! 5742: if test "$lib_linked" != yes; then
! 5743: func_fatal_configuration "unsupported hardcode properties"
! 5744: fi
! 5745:
! 5746: if test -n "$add_shlibpath"; then
! 5747: case :$compile_shlibpath: in
! 5748: *":$add_shlibpath:"*) ;;
! 5749: *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
! 5750: esac
! 5751: fi
! 5752: if test "$linkmode" = prog; then
! 5753: test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
! 5754: test -n "$add" && compile_deplibs="$add $compile_deplibs"
! 5755: else
! 5756: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 5757: test -n "$add" && deplibs="$add $deplibs"
! 5758: if test "$hardcode_direct" != yes &&
! 5759: test "$hardcode_minus_L" != yes &&
! 5760: test "$hardcode_shlibpath_var" = yes; then
! 5761: case :$finalize_shlibpath: in
! 5762: *":$libdir:"*) ;;
! 5763: *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
! 5764: esac
! 5765: fi
! 5766: fi
! 5767: fi
! 5768:
! 5769: if test "$linkmode" = prog || test "$mode" = relink; then
! 5770: add_shlibpath=
! 5771: add_dir=
! 5772: add=
! 5773: # Finalize command for both is simple: just hardcode it.
! 5774: if test "$hardcode_direct" = yes &&
! 5775: test "$hardcode_direct_absolute" = no; then
! 5776: add="$libdir/$linklib"
! 5777: elif test "$hardcode_minus_L" = yes; then
! 5778: add_dir="-L$libdir"
! 5779: add="-l$name"
! 5780: elif test "$hardcode_shlibpath_var" = yes; then
! 5781: case :$finalize_shlibpath: in
! 5782: *":$libdir:"*) ;;
! 5783: *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
! 5784: esac
! 5785: add="-l$name"
! 5786: elif test "$hardcode_automatic" = yes; then
! 5787: if test -n "$inst_prefix_dir" &&
! 5788: test -f "$inst_prefix_dir$libdir/$linklib" ; then
! 5789: add="$inst_prefix_dir$libdir/$linklib"
! 5790: else
! 5791: add="$libdir/$linklib"
! 5792: fi
! 5793: else
! 5794: # We cannot seem to hardcode it, guess we'll fake it.
! 5795: add_dir="-L$libdir"
! 5796: # Try looking first in the location we're being installed to.
! 5797: if test -n "$inst_prefix_dir"; then
! 5798: case $libdir in
! 5799: [\\/]*)
! 5800: add_dir="$add_dir -L$inst_prefix_dir$libdir"
! 5801: ;;
! 5802: esac
! 5803: fi
! 5804: add="-l$name"
! 5805: fi
! 5806:
! 5807: if test "$linkmode" = prog; then
! 5808: test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
! 5809: test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
! 5810: else
! 5811: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 5812: test -n "$add" && deplibs="$add $deplibs"
! 5813: fi
! 5814: fi
! 5815: elif test "$linkmode" = prog; then
! 5816: # Here we assume that one of hardcode_direct or hardcode_minus_L
! 5817: # is not unsupported. This is valid on all known static and
! 5818: # shared platforms.
! 5819: if test "$hardcode_direct" != unsupported; then
! 5820: test -n "$old_library" && linklib="$old_library"
! 5821: compile_deplibs="$dir/$linklib $compile_deplibs"
! 5822: finalize_deplibs="$dir/$linklib $finalize_deplibs"
! 5823: else
! 5824: compile_deplibs="-l$name -L$dir $compile_deplibs"
! 5825: finalize_deplibs="-l$name -L$dir $finalize_deplibs"
! 5826: fi
! 5827: elif test "$build_libtool_libs" = yes; then
! 5828: # Not a shared library
! 5829: if test "$deplibs_check_method" != pass_all; then
! 5830: # We're trying link a shared library against a static one
! 5831: # but the system doesn't support it.
! 5832:
! 5833: # Just print a warning and add the library to dependency_libs so
! 5834: # that the program can be linked against the static library.
! 5835: $ECHO
! 5836: $ECHO "*** Warning: This system can not link to static lib archive $lib."
! 5837: $ECHO "*** I have the capability to make that library automatically link in when"
! 5838: $ECHO "*** you link to this library. But I can only do this if you have a"
! 5839: $ECHO "*** shared version of the library, which you do not appear to have."
! 5840: if test "$module" = yes; then
! 5841: $ECHO "*** But as you try to build a module library, libtool will still create "
! 5842: $ECHO "*** a static module, that should work as long as the dlopening application"
! 5843: $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
! 5844: if test -z "$global_symbol_pipe"; then
! 5845: $ECHO
! 5846: $ECHO "*** However, this would only work if libtool was able to extract symbol"
! 5847: $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 5848: $ECHO "*** not find such a program. So, this module is probably useless."
! 5849: $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
! 5850: fi
! 5851: if test "$build_old_libs" = no; then
! 5852: build_libtool_libs=module
! 5853: build_old_libs=yes
! 5854: else
! 5855: build_libtool_libs=no
! 5856: fi
! 5857: fi
! 5858: else
! 5859: deplibs="$dir/$old_library $deplibs"
! 5860: link_static=yes
! 5861: fi
! 5862: fi # link shared/static library?
! 5863:
! 5864: if test "$linkmode" = lib; then
! 5865: if test -n "$dependency_libs" &&
! 5866: { test "$hardcode_into_libs" != yes ||
! 5867: test "$build_old_libs" = yes ||
! 5868: test "$link_static" = yes; }; then
! 5869: # Extract -R from dependency_libs
! 5870: temp_deplibs=
! 5871: for libdir in $dependency_libs; do
! 5872: case $libdir in
! 5873: -R*) func_stripname '-R' '' "$libdir"
! 5874: temp_xrpath=$func_stripname_result
! 5875: case " $xrpath " in
! 5876: *" $temp_xrpath "*) ;;
! 5877: *) xrpath="$xrpath $temp_xrpath";;
! 5878: esac;;
! 5879: *) temp_deplibs="$temp_deplibs $libdir";;
! 5880: esac
! 5881: done
! 5882: dependency_libs="$temp_deplibs"
! 5883: fi
! 5884:
! 5885: newlib_search_path="$newlib_search_path $absdir"
! 5886: # Link against this library
! 5887: test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
! 5888: # ... and its dependency_libs
! 5889: tmp_libs=
! 5890: for deplib in $dependency_libs; do
! 5891: newdependency_libs="$deplib $newdependency_libs"
! 5892: if $opt_duplicate_deps ; then
! 5893: case "$tmp_libs " in
! 5894: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5895: esac
! 5896: fi
! 5897: tmp_libs="$tmp_libs $deplib"
! 5898: done
! 5899:
! 5900: if test "$link_all_deplibs" != no; then
! 5901: # Add the search paths of all dependency libraries
! 5902: for deplib in $dependency_libs; do
! 5903: case $deplib in
! 5904: -L*) path="$deplib" ;;
! 5905: *.la)
! 5906: func_dirname "$deplib" "" "."
! 5907: dir="$func_dirname_result"
! 5908: # We need an absolute path.
! 5909: case $dir in
! 5910: [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
! 5911: *)
! 5912: absdir=`cd "$dir" && pwd`
! 5913: if test -z "$absdir"; then
! 5914: func_warning "cannot determine absolute directory name of \`$dir'"
! 5915: absdir="$dir"
! 5916: fi
! 5917: ;;
! 5918: esac
! 5919: if $GREP "^installed=no" $deplib > /dev/null; then
! 5920: case $host in
! 5921: *-*-darwin*)
! 5922: depdepl=
! 5923: eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
! 5924: if test -n "$deplibrary_names" ; then
! 5925: for tmp in $deplibrary_names ; do
! 5926: depdepl=$tmp
! 5927: done
! 5928: if test -f "$absdir/$objdir/$depdepl" ; then
! 5929: depdepl="$absdir/$objdir/$depdepl"
! 5930: darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
! 5931: if test -z "$darwin_install_name"; then
! 5932: darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
! 5933: fi
! 5934: compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
! 5935: linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
! 5936: path=
! 5937: fi
! 5938: fi
! 5939: ;;
! 5940: *)
! 5941: path="-L$absdir/$objdir"
! 5942: ;;
! 5943: esac
! 5944: else
! 5945: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 5946: test -z "$libdir" && \
! 5947: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 5948: test "$absdir" != "$libdir" && \
! 5949: func_warning "\`$deplib' seems to be moved"
! 5950:
! 5951: path="-L$absdir"
! 5952: fi
! 5953: ;;
! 5954: esac
! 5955: case " $deplibs " in
! 5956: *" $path "*) ;;
! 5957: *) deplibs="$path $deplibs" ;;
! 5958: esac
! 5959: done
! 5960: fi # link_all_deplibs != no
! 5961: fi # linkmode = lib
! 5962: done # for deplib in $libs
! 5963: if test "$pass" = link; then
! 5964: if test "$linkmode" = "prog"; then
! 5965: compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
! 5966: finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
! 5967: else
! 5968: compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 5969: fi
! 5970: fi
! 5971: dependency_libs="$newdependency_libs"
! 5972: if test "$pass" = dlpreopen; then
! 5973: # Link the dlpreopened libraries before other libraries
! 5974: for deplib in $save_deplibs; do
! 5975: deplibs="$deplib $deplibs"
! 5976: done
! 5977: fi
! 5978: if test "$pass" != dlopen; then
! 5979: if test "$pass" != conv; then
! 5980: # Make sure lib_search_path contains only unique directories.
! 5981: lib_search_path=
! 5982: for dir in $newlib_search_path; do
! 5983: case "$lib_search_path " in
! 5984: *" $dir "*) ;;
! 5985: *) lib_search_path="$lib_search_path $dir" ;;
! 5986: esac
! 5987: done
! 5988: newlib_search_path=
! 5989: fi
! 5990:
! 5991: if test "$linkmode,$pass" != "prog,link"; then
! 5992: vars="deplibs"
! 5993: else
! 5994: vars="compile_deplibs finalize_deplibs"
! 5995: fi
! 5996: for var in $vars dependency_libs; do
! 5997: # Add libraries to $var in reverse order
! 5998: eval tmp_libs=\"\$$var\"
! 5999: new_libs=
! 6000: for deplib in $tmp_libs; do
! 6001: # FIXME: Pedantically, this is the right thing to do, so
! 6002: # that some nasty dependency loop isn't accidentally
! 6003: # broken:
! 6004: #new_libs="$deplib $new_libs"
! 6005: # Pragmatically, this seems to cause very few problems in
! 6006: # practice:
! 6007: case $deplib in
! 6008: -L*) new_libs="$deplib $new_libs" ;;
! 6009: -R*) ;;
! 6010: *)
! 6011: # And here is the reason: when a library appears more
! 6012: # than once as an explicit dependence of a library, or
! 6013: # is implicitly linked in more than once by the
! 6014: # compiler, it is considered special, and multiple
! 6015: # occurrences thereof are not removed. Compare this
! 6016: # with having the same library being listed as a
! 6017: # dependency of multiple other libraries: in this case,
! 6018: # we know (pedantically, we assume) the library does not
! 6019: # need to be listed more than once, so we keep only the
! 6020: # last copy. This is not always right, but it is rare
! 6021: # enough that we require users that really mean to play
! 6022: # such unportable linking tricks to link the library
! 6023: # using -Wl,-lname, so that libtool does not consider it
! 6024: # for duplicate removal.
! 6025: case " $specialdeplibs " in
! 6026: *" $deplib "*) new_libs="$deplib $new_libs" ;;
! 6027: *)
! 6028: case " $new_libs " in
! 6029: *" $deplib "*) ;;
! 6030: *) new_libs="$deplib $new_libs" ;;
! 6031: esac
! 6032: ;;
! 6033: esac
! 6034: ;;
! 6035: esac
! 6036: done
! 6037: tmp_libs=
! 6038: for deplib in $new_libs; do
! 6039: case $deplib in
! 6040: -L*)
! 6041: case " $tmp_libs " in
! 6042: *" $deplib "*) ;;
! 6043: *) tmp_libs="$tmp_libs $deplib" ;;
! 6044: esac
! 6045: ;;
! 6046: *) tmp_libs="$tmp_libs $deplib" ;;
! 6047: esac
! 6048: done
! 6049: eval $var=\"$tmp_libs\"
! 6050: done # for var
! 6051: fi
! 6052: # Last step: remove runtime libs from dependency_libs
! 6053: # (they stay in deplibs)
! 6054: tmp_libs=
! 6055: for i in $dependency_libs ; do
! 6056: case " $predeps $postdeps $compiler_lib_search_path " in
! 6057: *" $i "*)
! 6058: i=""
! 6059: ;;
! 6060: esac
! 6061: if test -n "$i" ; then
! 6062: tmp_libs="$tmp_libs $i"
! 6063: fi
! 6064: done
! 6065: dependency_libs=$tmp_libs
! 6066: done # for pass
! 6067: if test "$linkmode" = prog; then
! 6068: dlfiles="$newdlfiles"
! 6069: fi
! 6070: if test "$linkmode" = prog || test "$linkmode" = lib; then
! 6071: dlprefiles="$newdlprefiles"
! 6072: fi
! 6073:
! 6074: case $linkmode in
! 6075: oldlib)
! 6076: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 6077: func_warning "\`-dlopen' is ignored for archives"
! 6078: fi
! 6079:
! 6080: case " $deplibs" in
! 6081: *\ -l* | *\ -L*)
! 6082: func_warning "\`-l' and \`-L' are ignored for archives" ;;
! 6083: esac
! 6084:
! 6085: test -n "$rpath" && \
! 6086: func_warning "\`-rpath' is ignored for archives"
! 6087:
! 6088: test -n "$xrpath" && \
! 6089: func_warning "\`-R' is ignored for archives"
! 6090:
! 6091: test -n "$vinfo" && \
! 6092: func_warning "\`-version-info/-version-number' is ignored for archives"
! 6093:
! 6094: test -n "$release" && \
! 6095: func_warning "\`-release' is ignored for archives"
! 6096:
! 6097: test -n "$export_symbols$export_symbols_regex" && \
! 6098: func_warning "\`-export-symbols' is ignored for archives"
! 6099:
! 6100: # Now set the variables for building old libraries.
! 6101: build_libtool_libs=no
! 6102: oldlibs="$output"
! 6103: objs="$objs$old_deplibs"
! 6104: ;;
! 6105:
! 6106: lib)
! 6107: # Make sure we only generate libraries of the form `libNAME.la'.
! 6108: case $outputname in
! 6109: lib*)
! 6110: func_stripname 'lib' '.la' "$outputname"
! 6111: name=$func_stripname_result
! 6112: eval shared_ext=\"$shrext_cmds\"
! 6113: eval libname=\"$libname_spec\"
! 6114: ;;
! 6115: *)
! 6116: test "$module" = no && \
! 6117: func_fatal_help "libtool library \`$output' must begin with \`lib'"
! 6118:
! 6119: if test "$need_lib_prefix" != no; then
! 6120: # Add the "lib" prefix for modules if required
! 6121: func_stripname '' '.la' "$outputname"
! 6122: name=$func_stripname_result
! 6123: eval shared_ext=\"$shrext_cmds\"
! 6124: eval libname=\"$libname_spec\"
! 6125: else
! 6126: func_stripname '' '.la' "$outputname"
! 6127: libname=$func_stripname_result
! 6128: fi
! 6129: ;;
! 6130: esac
! 6131:
! 6132: if test -n "$objs"; then
! 6133: if test "$deplibs_check_method" != pass_all; then
! 6134: func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
! 6135: else
! 6136: $ECHO
! 6137: $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
! 6138: $ECHO "*** objects $objs is not portable!"
! 6139: libobjs="$libobjs $objs"
! 6140: fi
! 6141: fi
! 6142:
! 6143: test "$dlself" != no && \
! 6144: func_warning "\`-dlopen self' is ignored for libtool libraries"
! 6145:
! 6146: set dummy $rpath
! 6147: shift
! 6148: test "$#" -gt 1 && \
! 6149: func_warning "ignoring multiple \`-rpath's for a libtool library"
! 6150:
! 6151: install_libdir="$1"
! 6152:
! 6153: oldlibs=
! 6154: if test -z "$rpath"; then
! 6155: if test "$build_libtool_libs" = yes; then
! 6156: # Building a libtool convenience library.
! 6157: # Some compilers have problems with a `.al' extension so
! 6158: # convenience libraries should have the same extension an
! 6159: # archive normally would.
! 6160: oldlibs="$output_objdir/$libname.$libext $oldlibs"
! 6161: build_libtool_libs=convenience
! 6162: build_old_libs=yes
! 6163: fi
! 6164:
! 6165: test -n "$vinfo" && \
! 6166: func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
! 6167:
! 6168: test -n "$release" && \
! 6169: func_warning "\`-release' is ignored for convenience libraries"
! 6170: else
! 6171:
! 6172: # Parse the version information argument.
! 6173: save_ifs="$IFS"; IFS=':'
! 6174: set dummy $vinfo 0 0 0
! 6175: shift
! 6176: IFS="$save_ifs"
! 6177:
! 6178: test -n "$7" && \
! 6179: func_fatal_help "too many parameters to \`-version-info'"
! 6180:
! 6181: # convert absolute version numbers to libtool ages
! 6182: # this retains compatibility with .la files and attempts
! 6183: # to make the code below a bit more comprehensible
! 6184:
! 6185: case $vinfo_number in
! 6186: yes)
! 6187: number_major="$1"
! 6188: number_minor="$2"
! 6189: number_revision="$3"
! 6190: #
! 6191: # There are really only two kinds -- those that
! 6192: # use the current revision as the major version
! 6193: # and those that subtract age and use age as
! 6194: # a minor version. But, then there is irix
! 6195: # which has an extra 1 added just for fun
! 6196: #
! 6197: case $version_type in
! 6198: darwin|linux|osf|windows|none)
! 6199: func_arith $number_major + $number_minor
! 6200: current=$func_arith_result
! 6201: age="$number_minor"
! 6202: revision="$number_revision"
! 6203: ;;
! 6204: freebsd-aout|freebsd-elf|sunos)
! 6205: current="$number_major"
! 6206: revision="$number_minor"
! 6207: age="0"
! 6208: ;;
! 6209: irix|nonstopux)
! 6210: func_arith $number_major + $number_minor
! 6211: current=$func_arith_result
! 6212: age="$number_minor"
! 6213: revision="$number_minor"
! 6214: lt_irix_increment=no
! 6215: ;;
! 6216: esac
! 6217: ;;
! 6218: no)
! 6219: current="$1"
! 6220: revision="$2"
! 6221: age="$3"
! 6222: ;;
! 6223: esac
! 6224:
! 6225: # Check that each of the things are valid numbers.
! 6226: case $current in
! 6227: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 6228: *)
! 6229: func_error "CURRENT \`$current' must be a nonnegative integer"
! 6230: func_fatal_error "\`$vinfo' is not valid version information"
! 6231: ;;
! 6232: esac
! 6233:
! 6234: case $revision in
! 6235: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 6236: *)
! 6237: func_error "REVISION \`$revision' must be a nonnegative integer"
! 6238: func_fatal_error "\`$vinfo' is not valid version information"
! 6239: ;;
! 6240: esac
! 6241:
! 6242: case $age in
! 6243: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 6244: *)
! 6245: func_error "AGE \`$age' must be a nonnegative integer"
! 6246: func_fatal_error "\`$vinfo' is not valid version information"
! 6247: ;;
! 6248: esac
! 6249:
! 6250: if test "$age" -gt "$current"; then
! 6251: func_error "AGE \`$age' is greater than the current interface number \`$current'"
! 6252: func_fatal_error "\`$vinfo' is not valid version information"
! 6253: fi
! 6254:
! 6255: # Calculate the version variables.
! 6256: major=
! 6257: versuffix=
! 6258: verstring=
! 6259: case $version_type in
! 6260: none) ;;
! 6261:
! 6262: darwin)
! 6263: # Like Linux, but with the current version available in
! 6264: # verstring for coding it into the library header
! 6265: func_arith $current - $age
! 6266: major=.$func_arith_result
! 6267: versuffix="$major.$age.$revision"
! 6268: # Darwin ld doesn't like 0 for these options...
! 6269: func_arith $current + 1
! 6270: minor_current=$func_arith_result
! 6271: xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
! 6272: verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
! 6273: ;;
! 6274:
! 6275: freebsd-aout)
! 6276: major=".$current"
! 6277: versuffix=".$current.$revision";
! 6278: ;;
! 6279:
! 6280: freebsd-elf)
! 6281: major=".$current"
! 6282: versuffix=".$current"
! 6283: ;;
! 6284:
! 6285: irix | nonstopux)
! 6286: if test "X$lt_irix_increment" = "Xno"; then
! 6287: func_arith $current - $age
! 6288: else
! 6289: func_arith $current - $age + 1
! 6290: fi
! 6291: major=$func_arith_result
! 6292:
! 6293: case $version_type in
! 6294: nonstopux) verstring_prefix=nonstopux ;;
! 6295: *) verstring_prefix=sgi ;;
! 6296: esac
! 6297: verstring="$verstring_prefix$major.$revision"
! 6298:
! 6299: # Add in all the interfaces that we are compatible with.
! 6300: loop=$revision
! 6301: while test "$loop" -ne 0; do
! 6302: func_arith $revision - $loop
! 6303: iface=$func_arith_result
! 6304: func_arith $loop - 1
! 6305: loop=$func_arith_result
! 6306: verstring="$verstring_prefix$major.$iface:$verstring"
! 6307: done
! 6308:
! 6309: # Before this point, $major must not contain `.'.
! 6310: major=.$major
! 6311: versuffix="$major.$revision"
! 6312: ;;
! 6313:
! 6314: linux)
! 6315: func_arith $current - $age
! 6316: major=.$func_arith_result
! 6317: versuffix="$major.$age.$revision"
! 6318: ;;
! 6319:
! 6320: osf)
! 6321: func_arith $current - $age
! 6322: major=.$func_arith_result
! 6323: versuffix=".$current.$age.$revision"
! 6324: verstring="$current.$age.$revision"
! 6325:
! 6326: # Add in all the interfaces that we are compatible with.
! 6327: loop=$age
! 6328: while test "$loop" -ne 0; do
! 6329: func_arith $current - $loop
! 6330: iface=$func_arith_result
! 6331: func_arith $loop - 1
! 6332: loop=$func_arith_result
! 6333: verstring="$verstring:${iface}.0"
! 6334: done
! 6335:
! 6336: # Make executables depend on our current version.
! 6337: verstring="$verstring:${current}.0"
! 6338: ;;
! 6339:
! 6340: qnx)
! 6341: major=".$current"
! 6342: versuffix=".$current"
! 6343: ;;
! 6344:
! 6345: sunos)
! 6346: major=".$current"
! 6347: versuffix=".$current.$revision"
! 6348: ;;
! 6349:
! 6350: windows)
! 6351: # Use '-' rather than '.', since we only want one
! 6352: # extension on DOS 8.3 filesystems.
! 6353: func_arith $current - $age
! 6354: major=$func_arith_result
! 6355: versuffix="-$major"
! 6356: ;;
! 6357:
! 6358: *)
! 6359: func_fatal_configuration "unknown library version type \`$version_type'"
! 6360: ;;
! 6361: esac
! 6362:
! 6363: # Clear the version info if we defaulted, and they specified a release.
! 6364: if test -z "$vinfo" && test -n "$release"; then
! 6365: major=
! 6366: case $version_type in
! 6367: darwin)
! 6368: # we can't check for "0.0" in archive_cmds due to quoting
! 6369: # problems, so we reset it completely
! 6370: verstring=
! 6371: ;;
! 6372: *)
! 6373: verstring="0.0"
! 6374: ;;
! 6375: esac
! 6376: if test "$need_version" = no; then
! 6377: versuffix=
! 6378: else
! 6379: versuffix=".0.0"
! 6380: fi
! 6381: fi
! 6382:
! 6383: # Remove version info from name if versioning should be avoided
! 6384: if test "$avoid_version" = yes && test "$need_version" = no; then
! 6385: major=
! 6386: versuffix=
! 6387: verstring=""
! 6388: fi
! 6389:
! 6390: # Check to see if the archive will have undefined symbols.
! 6391: if test "$allow_undefined" = yes; then
! 6392: if test "$allow_undefined_flag" = unsupported; then
! 6393: func_warning "undefined symbols not allowed in $host shared libraries"
! 6394: build_libtool_libs=no
! 6395: build_old_libs=yes
! 6396: fi
! 6397: else
! 6398: # Don't allow undefined symbols.
! 6399: allow_undefined_flag="$no_undefined_flag"
! 6400: fi
! 6401:
! 6402: fi
! 6403:
! 6404: func_generate_dlsyms "$libname" "$libname" "yes"
! 6405: libobjs="$libobjs $symfileobj"
! 6406: test "X$libobjs" = "X " && libobjs=
! 6407:
! 6408: if test "$mode" != relink; then
! 6409: # Remove our outputs, but don't remove object files since they
! 6410: # may have been created when compiling PIC objects.
! 6411: removelist=
! 6412: tempremovelist=`$ECHO "$output_objdir/*"`
! 6413: for p in $tempremovelist; do
! 6414: case $p in
! 6415: *.$objext | *.gcno)
! 6416: ;;
! 6417: $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
! 6418: if test "X$precious_files_regex" != "X"; then
! 6419: if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
! 6420: then
! 6421: continue
! 6422: fi
! 6423: fi
! 6424: removelist="$removelist $p"
! 6425: ;;
! 6426: *) ;;
! 6427: esac
! 6428: done
! 6429: test -n "$removelist" && \
! 6430: func_show_eval "${RM}r \$removelist"
! 6431: fi
! 6432:
! 6433: # Now set the variables for building old libraries.
! 6434: if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
! 6435: oldlibs="$oldlibs $output_objdir/$libname.$libext"
! 6436:
! 6437: # Transform .lo files to .o files.
! 6438: oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
! 6439: fi
! 6440:
! 6441: # Eliminate all temporary directories.
! 6442: #for path in $notinst_path; do
! 6443: # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
! 6444: # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
! 6445: # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
! 6446: #done
! 6447:
! 6448: if test -n "$xrpath"; then
! 6449: # If the user specified any rpath flags, then add them.
! 6450: temp_xrpath=
! 6451: for libdir in $xrpath; do
! 6452: temp_xrpath="$temp_xrpath -R$libdir"
! 6453: case "$finalize_rpath " in
! 6454: *" $libdir "*) ;;
! 6455: *) finalize_rpath="$finalize_rpath $libdir" ;;
! 6456: esac
! 6457: done
! 6458: if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
! 6459: dependency_libs="$temp_xrpath $dependency_libs"
! 6460: fi
! 6461: fi
! 6462:
! 6463: # Make sure dlfiles contains only unique files that won't be dlpreopened
! 6464: old_dlfiles="$dlfiles"
! 6465: dlfiles=
! 6466: for lib in $old_dlfiles; do
! 6467: case " $dlprefiles $dlfiles " in
! 6468: *" $lib "*) ;;
! 6469: *) dlfiles="$dlfiles $lib" ;;
! 6470: esac
! 6471: done
! 6472:
! 6473: # Make sure dlprefiles contains only unique files
! 6474: old_dlprefiles="$dlprefiles"
! 6475: dlprefiles=
! 6476: for lib in $old_dlprefiles; do
! 6477: case "$dlprefiles " in
! 6478: *" $lib "*) ;;
! 6479: *) dlprefiles="$dlprefiles $lib" ;;
! 6480: esac
! 6481: done
! 6482:
! 6483: if test "$build_libtool_libs" = yes; then
! 6484: if test -n "$rpath"; then
! 6485: case $host in
! 6486: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
! 6487: # these systems don't actually have a c library (as such)!
! 6488: ;;
! 6489: *-*-rhapsody* | *-*-darwin1.[012])
! 6490: # Rhapsody C library is in the System framework
! 6491: deplibs="$deplibs System.ltframework"
! 6492: ;;
! 6493: *-*-netbsd*)
! 6494: # Don't link with libc until the a.out ld.so is fixed.
! 6495: ;;
! 6496: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 6497: # Do not include libc due to us having libc/libc_r.
! 6498: ;;
! 6499: *-*-sco3.2v5* | *-*-sco5v6*)
! 6500: # Causes problems with __ctype
! 6501: ;;
! 6502: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 6503: # Compiler inserts libc in the correct place for threads to work
! 6504: ;;
! 6505: *)
! 6506: # Add libc to deplibs on all other systems if necessary.
! 6507: if test "$build_libtool_need_lc" = "yes"; then
! 6508: deplibs="$deplibs -lc"
! 6509: fi
! 6510: ;;
! 6511: esac
! 6512: fi
! 6513:
! 6514: # Transform deplibs into only deplibs that can be linked in shared.
! 6515: name_save=$name
! 6516: libname_save=$libname
! 6517: release_save=$release
! 6518: versuffix_save=$versuffix
! 6519: major_save=$major
! 6520: # I'm not sure if I'm treating the release correctly. I think
! 6521: # release should show up in the -l (ie -lgmp5) so we don't want to
! 6522: # add it in twice. Is that correct?
! 6523: release=""
! 6524: versuffix=""
! 6525: major=""
! 6526: newdeplibs=
! 6527: droppeddeps=no
! 6528: case $deplibs_check_method in
! 6529: pass_all)
! 6530: # Don't check for shared/static. Everything works.
! 6531: # This might be a little naive. We might want to check
! 6532: # whether the library exists or not. But this is on
! 6533: # osf3 & osf4 and I'm not really sure... Just
! 6534: # implementing what was already the behavior.
! 6535: newdeplibs=$deplibs
! 6536: ;;
! 6537: test_compile)
! 6538: # This code stresses the "libraries are programs" paradigm to its
! 6539: # limits. Maybe even breaks it. We compile a program, linking it
! 6540: # against the deplibs as a proxy for the library. Then we can check
! 6541: # whether they linked in statically or dynamically with ldd.
! 6542: $opt_dry_run || $RM conftest.c
! 6543: cat > conftest.c <<EOF
! 6544: int main() { return 0; }
! 6545: EOF
! 6546: $opt_dry_run || $RM conftest
! 6547: if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
! 6548: ldd_output=`ldd conftest`
! 6549: for i in $deplibs; do
! 6550: case $i in
! 6551: -l*)
! 6552: func_stripname -l '' "$i"
! 6553: name=$func_stripname_result
! 6554: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6555: case " $predeps $postdeps " in
! 6556: *" $i "*)
! 6557: newdeplibs="$newdeplibs $i"
! 6558: i=""
! 6559: ;;
! 6560: esac
! 6561: fi
! 6562: if test -n "$i" ; then
! 6563: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6564: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 6565: set dummy $deplib_matches; shift
! 6566: deplib_match=$1
! 6567: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 6568: newdeplibs="$newdeplibs $i"
! 6569: else
! 6570: droppeddeps=yes
! 6571: $ECHO
! 6572: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 6573: $ECHO "*** I have the capability to make that library automatically link in when"
! 6574: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6575: $ECHO "*** shared version of the library, which I believe you do not have"
! 6576: $ECHO "*** because a test_compile did reveal that the linker did not use it for"
! 6577: $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
! 6578: fi
! 6579: fi
! 6580: ;;
! 6581: *)
! 6582: newdeplibs="$newdeplibs $i"
! 6583: ;;
! 6584: esac
! 6585: done
! 6586: else
! 6587: # Error occurred in the first compile. Let's try to salvage
! 6588: # the situation: Compile a separate program for each library.
! 6589: for i in $deplibs; do
! 6590: case $i in
! 6591: -l*)
! 6592: func_stripname -l '' "$i"
! 6593: name=$func_stripname_result
! 6594: $opt_dry_run || $RM conftest
! 6595: if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
! 6596: ldd_output=`ldd conftest`
! 6597: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6598: case " $predeps $postdeps " in
! 6599: *" $i "*)
! 6600: newdeplibs="$newdeplibs $i"
! 6601: i=""
! 6602: ;;
! 6603: esac
! 6604: fi
! 6605: if test -n "$i" ; then
! 6606: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6607: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 6608: set dummy $deplib_matches; shift
! 6609: deplib_match=$1
! 6610: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 6611: newdeplibs="$newdeplibs $i"
! 6612: else
! 6613: droppeddeps=yes
! 6614: $ECHO
! 6615: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 6616: $ECHO "*** I have the capability to make that library automatically link in when"
! 6617: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6618: $ECHO "*** shared version of the library, which you do not appear to have"
! 6619: $ECHO "*** because a test_compile did reveal that the linker did not use this one"
! 6620: $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
! 6621: fi
! 6622: fi
! 6623: else
! 6624: droppeddeps=yes
! 6625: $ECHO
! 6626: $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
! 6627: $ECHO "*** make it link in! You will probably need to install it or some"
! 6628: $ECHO "*** library that it depends on before this library will be fully"
! 6629: $ECHO "*** functional. Installing it before continuing would be even better."
! 6630: fi
! 6631: ;;
! 6632: *)
! 6633: newdeplibs="$newdeplibs $i"
! 6634: ;;
! 6635: esac
! 6636: done
! 6637: fi
! 6638: ;;
! 6639: file_magic*)
! 6640: set dummy $deplibs_check_method; shift
! 6641: file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6642: for a_deplib in $deplibs; do
! 6643: case $a_deplib in
! 6644: -l*)
! 6645: func_stripname -l '' "$a_deplib"
! 6646: name=$func_stripname_result
! 6647: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6648: case " $predeps $postdeps " in
! 6649: *" $a_deplib "*)
! 6650: newdeplibs="$newdeplibs $a_deplib"
! 6651: a_deplib=""
! 6652: ;;
! 6653: esac
! 6654: fi
! 6655: if test -n "$a_deplib" ; then
! 6656: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6657: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 6658: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 6659: for potent_lib in $potential_libs; do
! 6660: # Follow soft links.
! 6661: if ls -lLd "$potent_lib" 2>/dev/null |
! 6662: $GREP " -> " >/dev/null; then
! 6663: continue
! 6664: fi
! 6665: # The statement above tries to avoid entering an
! 6666: # endless loop below, in case of cyclic links.
! 6667: # We might still enter an endless loop, since a link
! 6668: # loop can be closed while we follow links,
! 6669: # but so what?
! 6670: potlib="$potent_lib"
! 6671: while test -h "$potlib" 2>/dev/null; do
! 6672: potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
! 6673: case $potliblink in
! 6674: [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
! 6675: *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
! 6676: esac
! 6677: done
! 6678: if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
! 6679: $SED -e 10q |
! 6680: $EGREP "$file_magic_regex" > /dev/null; then
! 6681: newdeplibs="$newdeplibs $a_deplib"
! 6682: a_deplib=""
! 6683: break 2
! 6684: fi
! 6685: done
! 6686: done
! 6687: fi
! 6688: if test -n "$a_deplib" ; then
! 6689: droppeddeps=yes
! 6690: $ECHO
! 6691: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 6692: $ECHO "*** I have the capability to make that library automatically link in when"
! 6693: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6694: $ECHO "*** shared version of the library, which you do not appear to have"
! 6695: $ECHO "*** because I did check the linker path looking for a file starting"
! 6696: if test -z "$potlib" ; then
! 6697: $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
! 6698: else
! 6699: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 6700: $ECHO "*** using a file magic. Last file checked: $potlib"
! 6701: fi
! 6702: fi
! 6703: ;;
! 6704: *)
! 6705: # Add a -L argument.
! 6706: newdeplibs="$newdeplibs $a_deplib"
! 6707: ;;
! 6708: esac
! 6709: done # Gone through all deplibs.
! 6710: ;;
! 6711: match_pattern*)
! 6712: set dummy $deplibs_check_method; shift
! 6713: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6714: for a_deplib in $deplibs; do
! 6715: case $a_deplib in
! 6716: -l*)
! 6717: func_stripname -l '' "$a_deplib"
! 6718: name=$func_stripname_result
! 6719: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6720: case " $predeps $postdeps " in
! 6721: *" $a_deplib "*)
! 6722: newdeplibs="$newdeplibs $a_deplib"
! 6723: a_deplib=""
! 6724: ;;
! 6725: esac
! 6726: fi
! 6727: if test -n "$a_deplib" ; then
! 6728: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6729: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 6730: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 6731: for potent_lib in $potential_libs; do
! 6732: potlib="$potent_lib" # see symlink-check above in file_magic test
! 6733: if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
! 6734: $EGREP "$match_pattern_regex" > /dev/null; then
! 6735: newdeplibs="$newdeplibs $a_deplib"
! 6736: a_deplib=""
! 6737: break 2
! 6738: fi
! 6739: done
! 6740: done
! 6741: fi
! 6742: if test -n "$a_deplib" ; then
! 6743: droppeddeps=yes
! 6744: $ECHO
! 6745: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 6746: $ECHO "*** I have the capability to make that library automatically link in when"
! 6747: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6748: $ECHO "*** shared version of the library, which you do not appear to have"
! 6749: $ECHO "*** because I did check the linker path looking for a file starting"
! 6750: if test -z "$potlib" ; then
! 6751: $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
! 6752: else
! 6753: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 6754: $ECHO "*** using a regex pattern. Last file checked: $potlib"
! 6755: fi
! 6756: fi
! 6757: ;;
! 6758: *)
! 6759: # Add a -L argument.
! 6760: newdeplibs="$newdeplibs $a_deplib"
! 6761: ;;
! 6762: esac
! 6763: done # Gone through all deplibs.
! 6764: ;;
! 6765: none | unknown | *)
! 6766: newdeplibs=""
! 6767: tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
! 6768: -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
! 6769: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6770: for i in $predeps $postdeps ; do
! 6771: # can't use Xsed below, because $i might contain '/'
! 6772: tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
! 6773: done
! 6774: fi
! 6775: if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
! 6776: $GREP . >/dev/null; then
! 6777: $ECHO
! 6778: if test "X$deplibs_check_method" = "Xnone"; then
! 6779: $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
! 6780: else
! 6781: $ECHO "*** Warning: inter-library dependencies are not known to be supported."
! 6782: fi
! 6783: $ECHO "*** All declared inter-library dependencies are being dropped."
! 6784: droppeddeps=yes
! 6785: fi
! 6786: ;;
! 6787: esac
! 6788: versuffix=$versuffix_save
! 6789: major=$major_save
! 6790: release=$release_save
! 6791: libname=$libname_save
! 6792: name=$name_save
! 6793:
! 6794: case $host in
! 6795: *-*-rhapsody* | *-*-darwin1.[012])
! 6796: # On Rhapsody replace the C library with the System framework
! 6797: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 6798: ;;
! 6799: esac
! 6800:
! 6801: if test "$droppeddeps" = yes; then
! 6802: if test "$module" = yes; then
! 6803: $ECHO
! 6804: $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
! 6805: $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
! 6806: $ECHO "*** a static module, that should work as long as the dlopening"
! 6807: $ECHO "*** application is linked with the -dlopen flag."
! 6808: if test -z "$global_symbol_pipe"; then
! 6809: $ECHO
! 6810: $ECHO "*** However, this would only work if libtool was able to extract symbol"
! 6811: $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 6812: $ECHO "*** not find such a program. So, this module is probably useless."
! 6813: $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
! 6814: fi
! 6815: if test "$build_old_libs" = no; then
! 6816: oldlibs="$output_objdir/$libname.$libext"
! 6817: build_libtool_libs=module
! 6818: build_old_libs=yes
! 6819: else
! 6820: build_libtool_libs=no
! 6821: fi
! 6822: else
! 6823: $ECHO "*** The inter-library dependencies that have been dropped here will be"
! 6824: $ECHO "*** automatically added whenever a program is linked with this library"
! 6825: $ECHO "*** or is declared to -dlopen it."
! 6826:
! 6827: if test "$allow_undefined" = no; then
! 6828: $ECHO
! 6829: $ECHO "*** Since this library must not contain undefined symbols,"
! 6830: $ECHO "*** because either the platform does not support them or"
! 6831: $ECHO "*** it was explicitly requested with -no-undefined,"
! 6832: $ECHO "*** libtool will only create a static version of it."
! 6833: if test "$build_old_libs" = no; then
! 6834: oldlibs="$output_objdir/$libname.$libext"
! 6835: build_libtool_libs=module
! 6836: build_old_libs=yes
! 6837: else
! 6838: build_libtool_libs=no
! 6839: fi
! 6840: fi
! 6841: fi
! 6842: fi
! 6843: # Done checking deplibs!
! 6844: deplibs=$newdeplibs
! 6845: fi
! 6846: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 6847: case $host in
! 6848: *-*-darwin*)
! 6849: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6850: new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6851: deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6852: ;;
! 6853: esac
! 6854:
! 6855: # move library search paths that coincide with paths to not yet
! 6856: # installed libraries to the beginning of the library search list
! 6857: new_libs=
! 6858: for path in $notinst_path; do
! 6859: case " $new_libs " in
! 6860: *" -L$path/$objdir "*) ;;
! 6861: *)
! 6862: case " $deplibs " in
! 6863: *" -L$path/$objdir "*)
! 6864: new_libs="$new_libs -L$path/$objdir" ;;
! 6865: esac
! 6866: ;;
! 6867: esac
! 6868: done
! 6869: for deplib in $deplibs; do
! 6870: case $deplib in
! 6871: -L*)
! 6872: case " $new_libs " in
! 6873: *" $deplib "*) ;;
! 6874: *) new_libs="$new_libs $deplib" ;;
! 6875: esac
! 6876: ;;
! 6877: *) new_libs="$new_libs $deplib" ;;
! 6878: esac
! 6879: done
! 6880: deplibs="$new_libs"
! 6881:
! 6882: # All the library-specific variables (install_libdir is set above).
! 6883: library_names=
! 6884: old_library=
! 6885: dlname=
! 6886:
! 6887: # Test again, we may have decided not to build it any more
! 6888: if test "$build_libtool_libs" = yes; then
! 6889: if test "$hardcode_into_libs" = yes; then
! 6890: # Hardcode the library paths
! 6891: hardcode_libdirs=
! 6892: dep_rpath=
! 6893: rpath="$finalize_rpath"
! 6894: test "$mode" != relink && rpath="$compile_rpath$rpath"
! 6895: for libdir in $rpath; do
! 6896: if test -n "$hardcode_libdir_flag_spec"; then
! 6897: if test -n "$hardcode_libdir_separator"; then
! 6898: if test -z "$hardcode_libdirs"; then
! 6899: hardcode_libdirs="$libdir"
! 6900: else
! 6901: # Just accumulate the unique libdirs.
! 6902: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 6903: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 6904: ;;
! 6905: *)
! 6906: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 6907: ;;
! 6908: esac
! 6909: fi
! 6910: else
! 6911: eval flag=\"$hardcode_libdir_flag_spec\"
! 6912: dep_rpath="$dep_rpath $flag"
! 6913: fi
! 6914: elif test -n "$runpath_var"; then
! 6915: case "$perm_rpath " in
! 6916: *" $libdir "*) ;;
! 6917: *) perm_rpath="$perm_rpath $libdir" ;;
! 6918: esac
! 6919: fi
! 6920: done
! 6921: # Substitute the hardcoded libdirs into the rpath.
! 6922: if test -n "$hardcode_libdir_separator" &&
! 6923: test -n "$hardcode_libdirs"; then
! 6924: libdir="$hardcode_libdirs"
! 6925: if test -n "$hardcode_libdir_flag_spec_ld"; then
! 6926: eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
! 6927: else
! 6928: eval dep_rpath=\"$hardcode_libdir_flag_spec\"
! 6929: fi
! 6930: fi
! 6931: if test -n "$runpath_var" && test -n "$perm_rpath"; then
! 6932: # We should set the runpath_var.
! 6933: rpath=
! 6934: for dir in $perm_rpath; do
! 6935: rpath="$rpath$dir:"
! 6936: done
! 6937: eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
! 6938: fi
! 6939: test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
! 6940: fi
! 6941:
! 6942: shlibpath="$finalize_shlibpath"
! 6943: test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
! 6944: if test -n "$shlibpath"; then
! 6945: eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
! 6946: fi
! 6947:
! 6948: # Get the real and link names of the library.
! 6949: eval shared_ext=\"$shrext_cmds\"
! 6950: eval library_names=\"$library_names_spec\"
! 6951: set dummy $library_names
! 6952: shift
! 6953: realname="$1"
! 6954: shift
! 6955:
! 6956: if test -n "$soname_spec"; then
! 6957: eval soname=\"$soname_spec\"
! 6958: else
! 6959: soname="$realname"
! 6960: fi
! 6961: if test -z "$dlname"; then
! 6962: dlname=$soname
! 6963: fi
! 6964:
! 6965: lib="$output_objdir/$realname"
! 6966: linknames=
! 6967: for link
! 6968: do
! 6969: linknames="$linknames $link"
! 6970: done
! 6971:
! 6972: # Use standard objects if they are pic
! 6973: test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 6974: test "X$libobjs" = "X " && libobjs=
! 6975:
! 6976: delfiles=
! 6977: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 6978: $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
! 6979: export_symbols="$output_objdir/$libname.uexp"
! 6980: delfiles="$delfiles $export_symbols"
! 6981: fi
! 6982:
! 6983: orig_export_symbols=
! 6984: case $host_os in
! 6985: cygwin* | mingw* | cegcc*)
! 6986: if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
! 6987: # exporting using user supplied symfile
! 6988: if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
! 6989: # and it's NOT already a .def file. Must figure out
! 6990: # which of the given symbols are data symbols and tag
! 6991: # them as such. So, trigger use of export_symbols_cmds.
! 6992: # export_symbols gets reassigned inside the "prepare
! 6993: # the list of exported symbols" if statement, so the
! 6994: # include_expsyms logic still works.
! 6995: orig_export_symbols="$export_symbols"
! 6996: export_symbols=
! 6997: always_export_symbols=yes
! 6998: fi
! 6999: fi
! 7000: ;;
! 7001: esac
! 7002:
! 7003: # Prepare the list of exported symbols
! 7004: if test -z "$export_symbols"; then
! 7005: if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
! 7006: func_verbose "generating symbol list for \`$libname.la'"
! 7007: export_symbols="$output_objdir/$libname.exp"
! 7008: $opt_dry_run || $RM $export_symbols
! 7009: cmds=$export_symbols_cmds
! 7010: save_ifs="$IFS"; IFS='~'
! 7011: for cmd in $cmds; do
! 7012: IFS="$save_ifs"
! 7013: eval cmd=\"$cmd\"
! 7014: func_len " $cmd"
! 7015: len=$func_len_result
! 7016: if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7017: func_show_eval "$cmd" 'exit $?'
! 7018: skipped_export=false
! 7019: else
! 7020: # The command line is too long to execute in one step.
! 7021: func_verbose "using reloadable object file for export list..."
! 7022: skipped_export=:
! 7023: # Break out early, otherwise skipped_export may be
! 7024: # set to false by a later but shorter cmd.
! 7025: break
! 7026: fi
! 7027: done
! 7028: IFS="$save_ifs"
! 7029: if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
! 7030: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 7031: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 7032: fi
! 7033: fi
! 7034: fi
! 7035:
! 7036: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 7037: tmp_export_symbols="$export_symbols"
! 7038: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 7039: $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
! 7040: fi
! 7041:
! 7042: if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
! 7043: # The given exports_symbols file has to be filtered, so filter it.
! 7044: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 7045: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 7046: # 's' commands which not all seds can handle. GNU sed should be fine
! 7047: # though. Also, the filter scales superlinearly with the number of
! 7048: # global variables. join(1) would be nice here, but unfortunately
! 7049: # isn't a blessed tool.
! 7050: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 7051: delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
! 7052: export_symbols=$output_objdir/$libname.def
! 7053: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 7054: fi
! 7055:
! 7056: tmp_deplibs=
! 7057: for test_deplib in $deplibs; do
! 7058: case " $convenience " in
! 7059: *" $test_deplib "*) ;;
! 7060: *)
! 7061: tmp_deplibs="$tmp_deplibs $test_deplib"
! 7062: ;;
! 7063: esac
! 7064: done
! 7065: deplibs="$tmp_deplibs"
! 7066:
! 7067: if test -n "$convenience"; then
! 7068: if test -n "$whole_archive_flag_spec" &&
! 7069: test "$compiler_needs_object" = yes &&
! 7070: test -z "$libobjs"; then
! 7071: # extract the archives, so we have objects to list.
! 7072: # TODO: could optimize this to just extract one archive.
! 7073: whole_archive_flag_spec=
! 7074: fi
! 7075: if test -n "$whole_archive_flag_spec"; then
! 7076: save_libobjs=$libobjs
! 7077: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 7078: test "X$libobjs" = "X " && libobjs=
! 7079: else
! 7080: gentop="$output_objdir/${outputname}x"
! 7081: generated="$generated $gentop"
! 7082:
! 7083: func_extract_archives $gentop $convenience
! 7084: libobjs="$libobjs $func_extract_archives_result"
! 7085: test "X$libobjs" = "X " && libobjs=
! 7086: fi
! 7087: fi
! 7088:
! 7089: if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
! 7090: eval flag=\"$thread_safe_flag_spec\"
! 7091: linker_flags="$linker_flags $flag"
! 7092: fi
! 7093:
! 7094: # Make a backup of the uninstalled library when relinking
! 7095: if test "$mode" = relink; then
! 7096: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
! 7097: fi
! 7098:
! 7099: # Do each of the archive commands.
! 7100: if test "$module" = yes && test -n "$module_cmds" ; then
! 7101: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 7102: eval test_cmds=\"$module_expsym_cmds\"
! 7103: cmds=$module_expsym_cmds
! 7104: else
! 7105: eval test_cmds=\"$module_cmds\"
! 7106: cmds=$module_cmds
! 7107: fi
! 7108: else
! 7109: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 7110: eval test_cmds=\"$archive_expsym_cmds\"
! 7111: cmds=$archive_expsym_cmds
! 7112: else
! 7113: eval test_cmds=\"$archive_cmds\"
! 7114: cmds=$archive_cmds
! 7115: fi
! 7116: fi
! 7117:
! 7118: if test "X$skipped_export" != "X:" &&
! 7119: func_len " $test_cmds" &&
! 7120: len=$func_len_result &&
! 7121: test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7122: :
! 7123: else
! 7124: # The command line is too long to link in one step, link piecewise
! 7125: # or, if using GNU ld and skipped_export is not :, use a linker
! 7126: # script.
! 7127:
! 7128: # Save the value of $output and $libobjs because we want to
! 7129: # use them later. If we have whole_archive_flag_spec, we
! 7130: # want to use save_libobjs as it was before
! 7131: # whole_archive_flag_spec was expanded, because we can't
! 7132: # assume the linker understands whole_archive_flag_spec.
! 7133: # This may have to be revisited, in case too many
! 7134: # convenience libraries get linked in and end up exceeding
! 7135: # the spec.
! 7136: if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
! 7137: save_libobjs=$libobjs
! 7138: fi
! 7139: save_output=$output
! 7140: output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
! 7141:
! 7142: # Clear the reloadable object creation command queue and
! 7143: # initialize k to one.
! 7144: test_cmds=
! 7145: concat_cmds=
! 7146: objlist=
! 7147: last_robj=
! 7148: k=1
! 7149:
! 7150: if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
! 7151: output=${output_objdir}/${output_la}.lnkscript
! 7152: func_verbose "creating GNU ld script: $output"
! 7153: $ECHO 'INPUT (' > $output
! 7154: for obj in $save_libobjs
! 7155: do
! 7156: $ECHO "$obj" >> $output
! 7157: done
! 7158: $ECHO ')' >> $output
! 7159: delfiles="$delfiles $output"
! 7160: elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
! 7161: output=${output_objdir}/${output_la}.lnk
! 7162: func_verbose "creating linker input file list: $output"
! 7163: : > $output
! 7164: set x $save_libobjs
! 7165: shift
! 7166: firstobj=
! 7167: if test "$compiler_needs_object" = yes; then
! 7168: firstobj="$1 "
! 7169: shift
! 7170: fi
! 7171: for obj
! 7172: do
! 7173: $ECHO "$obj" >> $output
! 7174: done
! 7175: delfiles="$delfiles $output"
! 7176: output=$firstobj\"$file_list_spec$output\"
! 7177: else
! 7178: if test -n "$save_libobjs"; then
! 7179: func_verbose "creating reloadable object files..."
! 7180: output=$output_objdir/$output_la-${k}.$objext
! 7181: eval test_cmds=\"$reload_cmds\"
! 7182: func_len " $test_cmds"
! 7183: len0=$func_len_result
! 7184: len=$len0
! 7185:
! 7186: # Loop over the list of objects to be linked.
! 7187: for obj in $save_libobjs
! 7188: do
! 7189: func_len " $obj"
! 7190: func_arith $len + $func_len_result
! 7191: len=$func_arith_result
! 7192: if test "X$objlist" = X ||
! 7193: test "$len" -lt "$max_cmd_len"; then
! 7194: func_append objlist " $obj"
! 7195: else
! 7196: # The command $test_cmds is almost too long, add a
! 7197: # command to the queue.
! 7198: if test "$k" -eq 1 ; then
! 7199: # The first file doesn't have a previous command to add.
! 7200: eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
! 7201: else
! 7202: # All subsequent reloadable object files will link in
! 7203: # the last one created.
! 7204: eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
! 7205: fi
! 7206: last_robj=$output_objdir/$output_la-${k}.$objext
! 7207: func_arith $k + 1
! 7208: k=$func_arith_result
! 7209: output=$output_objdir/$output_la-${k}.$objext
! 7210: objlist=$obj
! 7211: func_len " $last_robj"
! 7212: func_arith $len0 + $func_len_result
! 7213: len=$func_arith_result
! 7214: fi
! 7215: done
! 7216: # Handle the remaining objects by creating one last
! 7217: # reloadable object file. All subsequent reloadable object
! 7218: # files will link in the last one created.
! 7219: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 7220: eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
! 7221: if test -n "$last_robj"; then
! 7222: eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
! 7223: fi
! 7224: delfiles="$delfiles $output"
! 7225:
! 7226: else
! 7227: output=
! 7228: fi
! 7229:
! 7230: if ${skipped_export-false}; then
! 7231: func_verbose "generating symbol list for \`$libname.la'"
! 7232: export_symbols="$output_objdir/$libname.exp"
! 7233: $opt_dry_run || $RM $export_symbols
! 7234: libobjs=$output
! 7235: # Append the command to create the export file.
! 7236: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 7237: eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
! 7238: if test -n "$last_robj"; then
! 7239: eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
! 7240: fi
! 7241: fi
! 7242:
! 7243: test -n "$save_libobjs" &&
! 7244: func_verbose "creating a temporary reloadable object file: $output"
! 7245:
! 7246: # Loop through the commands generated above and execute them.
! 7247: save_ifs="$IFS"; IFS='~'
! 7248: for cmd in $concat_cmds; do
! 7249: IFS="$save_ifs"
! 7250: $opt_silent || {
! 7251: func_quote_for_expand "$cmd"
! 7252: eval "func_echo $func_quote_for_expand_result"
! 7253: }
! 7254: $opt_dry_run || eval "$cmd" || {
! 7255: lt_exit=$?
! 7256:
! 7257: # Restore the uninstalled library and exit
! 7258: if test "$mode" = relink; then
! 7259: ( cd "$output_objdir" && \
! 7260: $RM "${realname}T" && \
! 7261: $MV "${realname}U" "$realname" )
! 7262: fi
! 7263:
! 7264: exit $lt_exit
! 7265: }
! 7266: done
! 7267: IFS="$save_ifs"
! 7268:
! 7269: if test -n "$export_symbols_regex" && ${skipped_export-false}; then
! 7270: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 7271: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 7272: fi
! 7273: fi
! 7274:
! 7275: if ${skipped_export-false}; then
! 7276: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 7277: tmp_export_symbols="$export_symbols"
! 7278: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 7279: $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
! 7280: fi
! 7281:
! 7282: if test -n "$orig_export_symbols"; then
! 7283: # The given exports_symbols file has to be filtered, so filter it.
! 7284: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 7285: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 7286: # 's' commands which not all seds can handle. GNU sed should be fine
! 7287: # though. Also, the filter scales superlinearly with the number of
! 7288: # global variables. join(1) would be nice here, but unfortunately
! 7289: # isn't a blessed tool.
! 7290: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 7291: delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
! 7292: export_symbols=$output_objdir/$libname.def
! 7293: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 7294: fi
! 7295: fi
! 7296:
! 7297: libobjs=$output
! 7298: # Restore the value of output.
! 7299: output=$save_output
! 7300:
! 7301: if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
! 7302: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 7303: test "X$libobjs" = "X " && libobjs=
! 7304: fi
! 7305: # Expand the library linking commands again to reset the
! 7306: # value of $libobjs for piecewise linking.
! 7307:
! 7308: # Do each of the archive commands.
! 7309: if test "$module" = yes && test -n "$module_cmds" ; then
! 7310: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 7311: cmds=$module_expsym_cmds
! 7312: else
! 7313: cmds=$module_cmds
! 7314: fi
! 7315: else
! 7316: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 7317: cmds=$archive_expsym_cmds
! 7318: else
! 7319: cmds=$archive_cmds
! 7320: fi
! 7321: fi
! 7322: fi
! 7323:
! 7324: if test -n "$delfiles"; then
! 7325: # Append the command to remove temporary files to $cmds.
! 7326: eval cmds=\"\$cmds~\$RM $delfiles\"
! 7327: fi
! 7328:
! 7329: # Add any objects from preloaded convenience libraries
! 7330: if test -n "$dlprefiles"; then
! 7331: gentop="$output_objdir/${outputname}x"
! 7332: generated="$generated $gentop"
! 7333:
! 7334: func_extract_archives $gentop $dlprefiles
! 7335: libobjs="$libobjs $func_extract_archives_result"
! 7336: test "X$libobjs" = "X " && libobjs=
! 7337: fi
! 7338:
! 7339: save_ifs="$IFS"; IFS='~'
! 7340: for cmd in $cmds; do
! 7341: IFS="$save_ifs"
! 7342: eval cmd=\"$cmd\"
! 7343: $opt_silent || {
! 7344: func_quote_for_expand "$cmd"
! 7345: eval "func_echo $func_quote_for_expand_result"
! 7346: }
! 7347: $opt_dry_run || eval "$cmd" || {
! 7348: lt_exit=$?
! 7349:
! 7350: # Restore the uninstalled library and exit
! 7351: if test "$mode" = relink; then
! 7352: ( cd "$output_objdir" && \
! 7353: $RM "${realname}T" && \
! 7354: $MV "${realname}U" "$realname" )
! 7355: fi
! 7356:
! 7357: exit $lt_exit
! 7358: }
! 7359: done
! 7360: IFS="$save_ifs"
! 7361:
! 7362: # Restore the uninstalled library and exit
! 7363: if test "$mode" = relink; then
! 7364: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
! 7365:
! 7366: if test -n "$convenience"; then
! 7367: if test -z "$whole_archive_flag_spec"; then
! 7368: func_show_eval '${RM}r "$gentop"'
! 7369: fi
! 7370: fi
! 7371:
! 7372: exit $EXIT_SUCCESS
! 7373: fi
! 7374:
! 7375: # Create links to the real library.
! 7376: for linkname in $linknames; do
! 7377: if test "$realname" != "$linkname"; then
! 7378: func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
! 7379: fi
! 7380: done
! 7381:
! 7382: # If -module or -export-dynamic was specified, set the dlname.
! 7383: if test "$module" = yes || test "$export_dynamic" = yes; then
! 7384: # On all known operating systems, these are identical.
! 7385: dlname="$soname"
! 7386: fi
! 7387: fi
! 7388: ;;
! 7389:
! 7390: obj)
! 7391: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 7392: func_warning "\`-dlopen' is ignored for objects"
! 7393: fi
! 7394:
! 7395: case " $deplibs" in
! 7396: *\ -l* | *\ -L*)
! 7397: func_warning "\`-l' and \`-L' are ignored for objects" ;;
! 7398: esac
! 7399:
! 7400: test -n "$rpath" && \
! 7401: func_warning "\`-rpath' is ignored for objects"
! 7402:
! 7403: test -n "$xrpath" && \
! 7404: func_warning "\`-R' is ignored for objects"
! 7405:
! 7406: test -n "$vinfo" && \
! 7407: func_warning "\`-version-info' is ignored for objects"
! 7408:
! 7409: test -n "$release" && \
! 7410: func_warning "\`-release' is ignored for objects"
! 7411:
! 7412: case $output in
! 7413: *.lo)
! 7414: test -n "$objs$old_deplibs" && \
! 7415: func_fatal_error "cannot build library object \`$output' from non-libtool objects"
! 7416:
! 7417: libobj=$output
! 7418: func_lo2o "$libobj"
! 7419: obj=$func_lo2o_result
! 7420: ;;
! 7421: *)
! 7422: libobj=
! 7423: obj="$output"
! 7424: ;;
! 7425: esac
! 7426:
! 7427: # Delete the old objects.
! 7428: $opt_dry_run || $RM $obj $libobj
! 7429:
! 7430: # Objects from convenience libraries. This assumes
! 7431: # single-version convenience libraries. Whenever we create
! 7432: # different ones for PIC/non-PIC, this we'll have to duplicate
! 7433: # the extraction.
! 7434: reload_conv_objs=
! 7435: gentop=
! 7436: # reload_cmds runs $LD directly, so let us get rid of
! 7437: # -Wl from whole_archive_flag_spec and hope we can get by with
! 7438: # turning comma into space..
! 7439: wl=
! 7440:
! 7441: if test -n "$convenience"; then
! 7442: if test -n "$whole_archive_flag_spec"; then
! 7443: eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
! 7444: reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
! 7445: else
! 7446: gentop="$output_objdir/${obj}x"
! 7447: generated="$generated $gentop"
! 7448:
! 7449: func_extract_archives $gentop $convenience
! 7450: reload_conv_objs="$reload_objs $func_extract_archives_result"
! 7451: fi
! 7452: fi
! 7453:
! 7454: # Create the old-style object.
! 7455: reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
! 7456:
! 7457: output="$obj"
! 7458: func_execute_cmds "$reload_cmds" 'exit $?'
! 7459:
! 7460: # Exit if we aren't doing a library object file.
! 7461: if test -z "$libobj"; then
! 7462: if test -n "$gentop"; then
! 7463: func_show_eval '${RM}r "$gentop"'
! 7464: fi
! 7465:
! 7466: exit $EXIT_SUCCESS
! 7467: fi
! 7468:
! 7469: if test "$build_libtool_libs" != yes; then
! 7470: if test -n "$gentop"; then
! 7471: func_show_eval '${RM}r "$gentop"'
! 7472: fi
! 7473:
! 7474: # Create an invalid libtool object if no PIC, so that we don't
! 7475: # accidentally link it into a program.
! 7476: # $show "echo timestamp > $libobj"
! 7477: # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
! 7478: exit $EXIT_SUCCESS
! 7479: fi
! 7480:
! 7481: if test -n "$pic_flag" || test "$pic_mode" != default; then
! 7482: # Only do commands if we really have different PIC objects.
! 7483: reload_objs="$libobjs $reload_conv_objs"
! 7484: output="$libobj"
! 7485: func_execute_cmds "$reload_cmds" 'exit $?'
! 7486: fi
! 7487:
! 7488: if test -n "$gentop"; then
! 7489: func_show_eval '${RM}r "$gentop"'
! 7490: fi
! 7491:
! 7492: exit $EXIT_SUCCESS
! 7493: ;;
! 7494:
! 7495: prog)
! 7496: case $host in
! 7497: *cygwin*) func_stripname '' '.exe' "$output"
! 7498: output=$func_stripname_result.exe;;
! 7499: esac
! 7500: test -n "$vinfo" && \
! 7501: func_warning "\`-version-info' is ignored for programs"
! 7502:
! 7503: test -n "$release" && \
! 7504: func_warning "\`-release' is ignored for programs"
! 7505:
! 7506: test "$preload" = yes \
! 7507: && test "$dlopen_support" = unknown \
! 7508: && test "$dlopen_self" = unknown \
! 7509: && test "$dlopen_self_static" = unknown && \
! 7510: func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
! 7511:
! 7512: case $host in
! 7513: *-*-rhapsody* | *-*-darwin1.[012])
! 7514: # On Rhapsody replace the C library is the System framework
! 7515: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 7516: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 7517: ;;
! 7518: esac
! 7519:
! 7520: case $host in
! 7521: *-*-darwin*)
! 7522: # Don't allow lazy linking, it breaks C++ global constructors
! 7523: # But is supposedly fixed on 10.4 or later (yay!).
! 7524: if test "$tagname" = CXX ; then
! 7525: case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
! 7526: 10.[0123])
! 7527: compile_command="$compile_command ${wl}-bind_at_load"
! 7528: finalize_command="$finalize_command ${wl}-bind_at_load"
! 7529: ;;
! 7530: esac
! 7531: fi
! 7532: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 7533: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7534: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7535: ;;
! 7536: esac
! 7537:
! 7538:
! 7539: # move library search paths that coincide with paths to not yet
! 7540: # installed libraries to the beginning of the library search list
! 7541: new_libs=
! 7542: for path in $notinst_path; do
! 7543: case " $new_libs " in
! 7544: *" -L$path/$objdir "*) ;;
! 7545: *)
! 7546: case " $compile_deplibs " in
! 7547: *" -L$path/$objdir "*)
! 7548: new_libs="$new_libs -L$path/$objdir" ;;
! 7549: esac
! 7550: ;;
! 7551: esac
! 7552: done
! 7553: for deplib in $compile_deplibs; do
! 7554: case $deplib in
! 7555: -L*)
! 7556: case " $new_libs " in
! 7557: *" $deplib "*) ;;
! 7558: *) new_libs="$new_libs $deplib" ;;
! 7559: esac
! 7560: ;;
! 7561: *) new_libs="$new_libs $deplib" ;;
! 7562: esac
! 7563: done
! 7564: compile_deplibs="$new_libs"
! 7565:
! 7566:
! 7567: compile_command="$compile_command $compile_deplibs"
! 7568: finalize_command="$finalize_command $finalize_deplibs"
! 7569:
! 7570: if test -n "$rpath$xrpath"; then
! 7571: # If the user specified any rpath flags, then add them.
! 7572: for libdir in $rpath $xrpath; do
! 7573: # This is the magic to use -rpath.
! 7574: case "$finalize_rpath " in
! 7575: *" $libdir "*) ;;
! 7576: *) finalize_rpath="$finalize_rpath $libdir" ;;
! 7577: esac
! 7578: done
! 7579: fi
! 7580:
! 7581: # Now hardcode the library paths
! 7582: rpath=
! 7583: hardcode_libdirs=
! 7584: for libdir in $compile_rpath $finalize_rpath; do
! 7585: if test -n "$hardcode_libdir_flag_spec"; then
! 7586: if test -n "$hardcode_libdir_separator"; then
! 7587: if test -z "$hardcode_libdirs"; then
! 7588: hardcode_libdirs="$libdir"
! 7589: else
! 7590: # Just accumulate the unique libdirs.
! 7591: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 7592: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 7593: ;;
! 7594: *)
! 7595: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 7596: ;;
! 7597: esac
! 7598: fi
! 7599: else
! 7600: eval flag=\"$hardcode_libdir_flag_spec\"
! 7601: rpath="$rpath $flag"
! 7602: fi
! 7603: elif test -n "$runpath_var"; then
! 7604: case "$perm_rpath " in
! 7605: *" $libdir "*) ;;
! 7606: *) perm_rpath="$perm_rpath $libdir" ;;
! 7607: esac
! 7608: fi
! 7609: case $host in
! 7610: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 7611: testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
! 7612: case :$dllsearchpath: in
! 7613: *":$libdir:"*) ;;
! 7614: ::) dllsearchpath=$libdir;;
! 7615: *) dllsearchpath="$dllsearchpath:$libdir";;
! 7616: esac
! 7617: case :$dllsearchpath: in
! 7618: *":$testbindir:"*) ;;
! 7619: ::) dllsearchpath=$testbindir;;
! 7620: *) dllsearchpath="$dllsearchpath:$testbindir";;
! 7621: esac
! 7622: ;;
! 7623: esac
! 7624: done
! 7625: # Substitute the hardcoded libdirs into the rpath.
! 7626: if test -n "$hardcode_libdir_separator" &&
! 7627: test -n "$hardcode_libdirs"; then
! 7628: libdir="$hardcode_libdirs"
! 7629: eval rpath=\" $hardcode_libdir_flag_spec\"
! 7630: fi
! 7631: compile_rpath="$rpath"
! 7632:
! 7633: rpath=
! 7634: hardcode_libdirs=
! 7635: for libdir in $finalize_rpath; do
! 7636: if test -n "$hardcode_libdir_flag_spec"; then
! 7637: if test -n "$hardcode_libdir_separator"; then
! 7638: if test -z "$hardcode_libdirs"; then
! 7639: hardcode_libdirs="$libdir"
! 7640: else
! 7641: # Just accumulate the unique libdirs.
! 7642: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 7643: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 7644: ;;
! 7645: *)
! 7646: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 7647: ;;
! 7648: esac
! 7649: fi
! 7650: else
! 7651: eval flag=\"$hardcode_libdir_flag_spec\"
! 7652: rpath="$rpath $flag"
! 7653: fi
! 7654: elif test -n "$runpath_var"; then
! 7655: case "$finalize_perm_rpath " in
! 7656: *" $libdir "*) ;;
! 7657: *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
! 7658: esac
! 7659: fi
! 7660: done
! 7661: # Substitute the hardcoded libdirs into the rpath.
! 7662: if test -n "$hardcode_libdir_separator" &&
! 7663: test -n "$hardcode_libdirs"; then
! 7664: libdir="$hardcode_libdirs"
! 7665: eval rpath=\" $hardcode_libdir_flag_spec\"
! 7666: fi
! 7667: finalize_rpath="$rpath"
! 7668:
! 7669: if test -n "$libobjs" && test "$build_old_libs" = yes; then
! 7670: # Transform all the library objects into standard objects.
! 7671: compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 7672: finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 7673: fi
! 7674:
! 7675: func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
! 7676:
! 7677: # template prelinking step
! 7678: if test -n "$prelink_cmds"; then
! 7679: func_execute_cmds "$prelink_cmds" 'exit $?'
! 7680: fi
! 7681:
! 7682: wrappers_required=yes
! 7683: case $host in
! 7684: *cygwin* | *mingw* )
! 7685: if test "$build_libtool_libs" != yes; then
! 7686: wrappers_required=no
! 7687: fi
! 7688: ;;
! 7689: *cegcc)
! 7690: # Disable wrappers for cegcc, we are cross compiling anyway.
! 7691: wrappers_required=no
! 7692: ;;
! 7693: *)
! 7694: if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
! 7695: wrappers_required=no
! 7696: fi
! 7697: ;;
! 7698: esac
! 7699: if test "$wrappers_required" = no; then
! 7700: # Replace the output file specification.
! 7701: compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
! 7702: link_command="$compile_command$compile_rpath"
! 7703:
! 7704: # We have no uninstalled library dependencies, so finalize right now.
! 7705: exit_status=0
! 7706: func_show_eval "$link_command" 'exit_status=$?'
! 7707:
! 7708: # Delete the generated files.
! 7709: if test -f "$output_objdir/${outputname}S.${objext}"; then
! 7710: func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
! 7711: fi
! 7712:
! 7713: exit $exit_status
! 7714: fi
! 7715:
! 7716: if test -n "$compile_shlibpath$finalize_shlibpath"; then
! 7717: compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
! 7718: fi
! 7719: if test -n "$finalize_shlibpath"; then
! 7720: finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
! 7721: fi
! 7722:
! 7723: compile_var=
! 7724: finalize_var=
! 7725: if test -n "$runpath_var"; then
! 7726: if test -n "$perm_rpath"; then
! 7727: # We should set the runpath_var.
! 7728: rpath=
! 7729: for dir in $perm_rpath; do
! 7730: rpath="$rpath$dir:"
! 7731: done
! 7732: compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 7733: fi
! 7734: if test -n "$finalize_perm_rpath"; then
! 7735: # We should set the runpath_var.
! 7736: rpath=
! 7737: for dir in $finalize_perm_rpath; do
! 7738: rpath="$rpath$dir:"
! 7739: done
! 7740: finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 7741: fi
! 7742: fi
! 7743:
! 7744: if test "$no_install" = yes; then
! 7745: # We don't need to create a wrapper script.
! 7746: link_command="$compile_var$compile_command$compile_rpath"
! 7747: # Replace the output file specification.
! 7748: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
! 7749: # Delete the old output file.
! 7750: $opt_dry_run || $RM $output
! 7751: # Link the executable and exit
! 7752: func_show_eval "$link_command" 'exit $?'
! 7753: exit $EXIT_SUCCESS
! 7754: fi
! 7755:
! 7756: if test "$hardcode_action" = relink; then
! 7757: # Fast installation is not supported
! 7758: link_command="$compile_var$compile_command$compile_rpath"
! 7759: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 7760:
! 7761: func_warning "this platform does not like uninstalled shared libraries"
! 7762: func_warning "\`$output' will be relinked during installation"
! 7763: else
! 7764: if test "$fast_install" != no; then
! 7765: link_command="$finalize_var$compile_command$finalize_rpath"
! 7766: if test "$fast_install" = yes; then
! 7767: relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
! 7768: else
! 7769: # fast_install is set to needless
! 7770: relink_command=
! 7771: fi
! 7772: else
! 7773: link_command="$compile_var$compile_command$compile_rpath"
! 7774: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 7775: fi
! 7776: fi
! 7777:
! 7778: # Replace the output file specification.
! 7779: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
! 7780:
! 7781: # Delete the old output files.
! 7782: $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
! 7783:
! 7784: func_show_eval "$link_command" 'exit $?'
! 7785:
! 7786: # Now create the wrapper script.
! 7787: func_verbose "creating $output"
! 7788:
! 7789: # Quote the relink command for shipping.
! 7790: if test -n "$relink_command"; then
! 7791: # Preserve any variables that may affect compiler behavior
! 7792: for var in $variables_saved_for_relink; do
! 7793: if eval test -z \"\${$var+set}\"; then
! 7794: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 7795: elif eval var_value=\$$var; test -z "$var_value"; then
! 7796: relink_command="$var=; export $var; $relink_command"
! 7797: else
! 7798: func_quote_for_eval "$var_value"
! 7799: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 7800: fi
! 7801: done
! 7802: relink_command="(cd `pwd`; $relink_command)"
! 7803: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
! 7804: fi
! 7805:
! 7806: # Quote $ECHO for shipping.
! 7807: if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
! 7808: case $progpath in
! 7809: [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
! 7810: *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
! 7811: esac
! 7812: qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
! 7813: else
! 7814: qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
! 7815: fi
! 7816:
! 7817: # Only actually do things if not in dry run mode.
! 7818: $opt_dry_run || {
! 7819: # win32 will think the script is a binary if it has
! 7820: # a .exe suffix, so we strip it off here.
! 7821: case $output in
! 7822: *.exe) func_stripname '' '.exe' "$output"
! 7823: output=$func_stripname_result ;;
! 7824: esac
! 7825: # test for cygwin because mv fails w/o .exe extensions
! 7826: case $host in
! 7827: *cygwin*)
! 7828: exeext=.exe
! 7829: func_stripname '' '.exe' "$outputname"
! 7830: outputname=$func_stripname_result ;;
! 7831: *) exeext= ;;
! 7832: esac
! 7833: case $host in
! 7834: *cygwin* | *mingw* )
! 7835: func_dirname_and_basename "$output" "" "."
! 7836: output_name=$func_basename_result
! 7837: output_path=$func_dirname_result
! 7838: cwrappersource="$output_path/$objdir/lt-$output_name.c"
! 7839: cwrapper="$output_path/$output_name.exe"
! 7840: $RM $cwrappersource $cwrapper
! 7841: trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
! 7842:
! 7843: func_emit_cwrapperexe_src > $cwrappersource
! 7844:
! 7845: # The wrapper executable is built using the $host compiler,
! 7846: # because it contains $host paths and files. If cross-
! 7847: # compiling, it, like the target executable, must be
! 7848: # executed on the $host or under an emulation environment.
! 7849: $opt_dry_run || {
! 7850: $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
! 7851: $STRIP $cwrapper
! 7852: }
! 7853:
! 7854: # Now, create the wrapper script for func_source use:
! 7855: func_ltwrapper_scriptname $cwrapper
! 7856: $RM $func_ltwrapper_scriptname_result
! 7857: trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
! 7858: $opt_dry_run || {
! 7859: # note: this script will not be executed, so do not chmod.
! 7860: if test "x$build" = "x$host" ; then
! 7861: $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
! 7862: else
! 7863: func_emit_wrapper no > $func_ltwrapper_scriptname_result
! 7864: fi
! 7865: }
! 7866: ;;
! 7867: * )
! 7868: $RM $output
! 7869: trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
! 7870:
! 7871: func_emit_wrapper no > $output
! 7872: chmod +x $output
! 7873: ;;
! 7874: esac
! 7875: }
! 7876: exit $EXIT_SUCCESS
! 7877: ;;
! 7878: esac
! 7879:
! 7880: # See if we need to build an old-fashioned archive.
! 7881: for oldlib in $oldlibs; do
! 7882:
! 7883: if test "$build_libtool_libs" = convenience; then
! 7884: oldobjs="$libobjs_save $symfileobj"
! 7885: addlibs="$convenience"
! 7886: build_libtool_libs=no
! 7887: else
! 7888: if test "$build_libtool_libs" = module; then
! 7889: oldobjs="$libobjs_save"
! 7890: build_libtool_libs=no
! 7891: else
! 7892: oldobjs="$old_deplibs $non_pic_objects"
! 7893: if test "$preload" = yes && test -f "$symfileobj"; then
! 7894: oldobjs="$oldobjs $symfileobj"
! 7895: fi
! 7896: fi
! 7897: addlibs="$old_convenience"
! 7898: fi
! 7899:
! 7900: if test -n "$addlibs"; then
! 7901: gentop="$output_objdir/${outputname}x"
! 7902: generated="$generated $gentop"
! 7903:
! 7904: func_extract_archives $gentop $addlibs
! 7905: oldobjs="$oldobjs $func_extract_archives_result"
! 7906: fi
! 7907:
! 7908: # Do each command in the archive commands.
! 7909: if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
! 7910: cmds=$old_archive_from_new_cmds
! 7911: else
! 7912:
! 7913: # Add any objects from preloaded convenience libraries
! 7914: if test -n "$dlprefiles"; then
! 7915: gentop="$output_objdir/${outputname}x"
! 7916: generated="$generated $gentop"
! 7917:
! 7918: func_extract_archives $gentop $dlprefiles
! 7919: oldobjs="$oldobjs $func_extract_archives_result"
! 7920: fi
! 7921:
! 7922: # POSIX demands no paths to be encoded in archives. We have
! 7923: # to avoid creating archives with duplicate basenames if we
! 7924: # might have to extract them afterwards, e.g., when creating a
! 7925: # static archive out of a convenience library, or when linking
! 7926: # the entirety of a libtool archive into another (currently
! 7927: # not supported by libtool).
! 7928: if (for obj in $oldobjs
! 7929: do
! 7930: func_basename "$obj"
! 7931: $ECHO "$func_basename_result"
! 7932: done | sort | sort -uc >/dev/null 2>&1); then
! 7933: :
! 7934: else
! 7935: $ECHO "copying selected object files to avoid basename conflicts..."
! 7936: gentop="$output_objdir/${outputname}x"
! 7937: generated="$generated $gentop"
! 7938: func_mkdir_p "$gentop"
! 7939: save_oldobjs=$oldobjs
! 7940: oldobjs=
! 7941: counter=1
! 7942: for obj in $save_oldobjs
! 7943: do
! 7944: func_basename "$obj"
! 7945: objbase="$func_basename_result"
! 7946: case " $oldobjs " in
! 7947: " ") oldobjs=$obj ;;
! 7948: *[\ /]"$objbase "*)
! 7949: while :; do
! 7950: # Make sure we don't pick an alternate name that also
! 7951: # overlaps.
! 7952: newobj=lt$counter-$objbase
! 7953: func_arith $counter + 1
! 7954: counter=$func_arith_result
! 7955: case " $oldobjs " in
! 7956: *[\ /]"$newobj "*) ;;
! 7957: *) if test ! -f "$gentop/$newobj"; then break; fi ;;
! 7958: esac
! 7959: done
! 7960: func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
! 7961: oldobjs="$oldobjs $gentop/$newobj"
! 7962: ;;
! 7963: *) oldobjs="$oldobjs $obj" ;;
! 7964: esac
! 7965: done
! 7966: fi
! 7967: eval cmds=\"$old_archive_cmds\"
! 7968:
! 7969: func_len " $cmds"
! 7970: len=$func_len_result
! 7971: if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7972: cmds=$old_archive_cmds
! 7973: else
! 7974: # the command line is too long to link in one step, link in parts
! 7975: func_verbose "using piecewise archive linking..."
! 7976: save_RANLIB=$RANLIB
! 7977: RANLIB=:
! 7978: objlist=
! 7979: concat_cmds=
! 7980: save_oldobjs=$oldobjs
! 7981: oldobjs=
! 7982: # Is there a better way of finding the last object in the list?
! 7983: for obj in $save_oldobjs
! 7984: do
! 7985: last_oldobj=$obj
! 7986: done
! 7987: eval test_cmds=\"$old_archive_cmds\"
! 7988: func_len " $test_cmds"
! 7989: len0=$func_len_result
! 7990: len=$len0
! 7991: for obj in $save_oldobjs
! 7992: do
! 7993: func_len " $obj"
! 7994: func_arith $len + $func_len_result
! 7995: len=$func_arith_result
! 7996: func_append objlist " $obj"
! 7997: if test "$len" -lt "$max_cmd_len"; then
! 7998: :
! 7999: else
! 8000: # the above command should be used before it gets too long
! 8001: oldobjs=$objlist
! 8002: if test "$obj" = "$last_oldobj" ; then
! 8003: RANLIB=$save_RANLIB
! 8004: fi
! 8005: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 8006: eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
! 8007: objlist=
! 8008: len=$len0
! 8009: fi
! 8010: done
! 8011: RANLIB=$save_RANLIB
! 8012: oldobjs=$objlist
! 8013: if test "X$oldobjs" = "X" ; then
! 8014: eval cmds=\"\$concat_cmds\"
! 8015: else
! 8016: eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
! 8017: fi
! 8018: fi
! 8019: fi
! 8020: func_execute_cmds "$cmds" 'exit $?'
! 8021: done
! 8022:
! 8023: test -n "$generated" && \
! 8024: func_show_eval "${RM}r$generated"
! 8025:
! 8026: # Now create the libtool archive.
! 8027: case $output in
! 8028: *.la)
! 8029: old_library=
! 8030: test "$build_old_libs" = yes && old_library="$libname.$libext"
! 8031: func_verbose "creating $output"
! 8032:
! 8033: # Preserve any variables that may affect compiler behavior
! 8034: for var in $variables_saved_for_relink; do
! 8035: if eval test -z \"\${$var+set}\"; then
! 8036: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 8037: elif eval var_value=\$$var; test -z "$var_value"; then
! 8038: relink_command="$var=; export $var; $relink_command"
! 8039: else
! 8040: func_quote_for_eval "$var_value"
! 8041: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 8042: fi
! 8043: done
! 8044: # Quote the link command for shipping.
! 8045: relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
! 8046: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
! 8047: if test "$hardcode_automatic" = yes ; then
! 8048: relink_command=
! 8049: fi
! 8050:
! 8051: # Only create the output if not a dry run.
! 8052: $opt_dry_run || {
! 8053: for installed in no yes; do
! 8054: if test "$installed" = yes; then
! 8055: if test -z "$install_libdir"; then
! 8056: break
! 8057: fi
! 8058: output="$output_objdir/$outputname"i
! 8059: # Replace all uninstalled libtool libraries with the installed ones
! 8060: newdependency_libs=
! 8061: for deplib in $dependency_libs; do
! 8062: case $deplib in
! 8063: *.la)
! 8064: func_basename "$deplib"
! 8065: name="$func_basename_result"
! 8066: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 8067: test -z "$libdir" && \
! 8068: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 8069: if test "x$EGREP" = x ; then
! 8070: EGREP=egrep
! 8071: fi
! 8072: # We do not want portage's install root ($D) present. Check only for
! 8073: # this if the .la is being installed.
! 8074: if test "$installed" = yes && test "$D"; then
! 8075: eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
! 8076: else
! 8077: mynewdependency_lib="$libdir/$name"
! 8078: fi
! 8079: # Do not add duplicates
! 8080: if test "$mynewdependency_lib"; then
! 8081: my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"`
! 8082: if test -z "$my_little_ninja_foo_1"; then
! 8083: newdependency_libs="$newdependency_libs $mynewdependency_lib"
! 8084: fi
! 8085: fi
! 8086: ;;
! 8087: *)
! 8088: if test "$installed" = yes; then
! 8089: # Rather use S=WORKDIR if our version of portage supports it.
! 8090: # This is because some ebuild (gcc) do not use $S as buildroot.
! 8091: if test "$PWORKDIR"; then
! 8092: S="$PWORKDIR"
! 8093: fi
! 8094: # We do not want portage's build root ($S) present.
! 8095: my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$S"`
! 8096: # We do not want portage's install root ($D) present.
! 8097: my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$D"`
! 8098: if test -n "$my_little_ninja_foo_2" && test "$S"; then
! 8099: mynewdependency_lib=""
! 8100: elif test -n "$my_little_ninja_foo_3" && test "$D"; then
! 8101: eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
! 8102: else
! 8103: mynewdependency_lib="$deplib"
! 8104: fi
! 8105: else
! 8106: mynewdependency_lib="$deplib"
! 8107: fi
! 8108: # Do not add duplicates
! 8109: if test "$mynewdependency_lib"; then
! 8110: my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"`
! 8111: if test -z "$my_little_ninja_foo_4"; then
! 8112: newdependency_libs="$newdependency_libs $mynewdependency_lib"
! 8113: fi
! 8114: fi
! 8115: ;;
! 8116: esac
! 8117: done
! 8118: dependency_libs="$newdependency_libs"
! 8119: newdlfiles=
! 8120:
! 8121: for lib in $dlfiles; do
! 8122: case $lib in
! 8123: *.la)
! 8124: func_basename "$lib"
! 8125: name="$func_basename_result"
! 8126: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 8127: test -z "$libdir" && \
! 8128: func_fatal_error "\`$lib' is not a valid libtool archive"
! 8129: newdlfiles="$newdlfiles $libdir/$name"
! 8130: ;;
! 8131: *) newdlfiles="$newdlfiles $lib" ;;
! 8132: esac
! 8133: done
! 8134: dlfiles="$newdlfiles"
! 8135: newdlprefiles=
! 8136: for lib in $dlprefiles; do
! 8137: case $lib in
! 8138: *.la)
! 8139: # Only pass preopened files to the pseudo-archive (for
! 8140: # eventual linking with the app. that links it) if we
! 8141: # didn't already link the preopened objects directly into
! 8142: # the library:
! 8143: func_basename "$lib"
! 8144: name="$func_basename_result"
! 8145: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 8146: test -z "$libdir" && \
! 8147: func_fatal_error "\`$lib' is not a valid libtool archive"
! 8148: newdlprefiles="$newdlprefiles $libdir/$name"
! 8149: ;;
! 8150: esac
! 8151: done
! 8152: dlprefiles="$newdlprefiles"
! 8153: else
! 8154: newdlfiles=
! 8155: for lib in $dlfiles; do
! 8156: case $lib in
! 8157: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 8158: *) abs=`pwd`"/$lib" ;;
! 8159: esac
! 8160: newdlfiles="$newdlfiles $abs"
! 8161: done
! 8162: dlfiles="$newdlfiles"
! 8163: newdlprefiles=
! 8164: for lib in $dlprefiles; do
! 8165: case $lib in
! 8166: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 8167: *) abs=`pwd`"/$lib" ;;
! 8168: esac
! 8169: newdlprefiles="$newdlprefiles $abs"
! 8170: done
! 8171: dlprefiles="$newdlprefiles"
! 8172: fi
! 8173: $RM $output
! 8174: # place dlname in correct position for cygwin
! 8175: tdlname=$dlname
! 8176: case $host,$output,$installed,$module,$dlname in
! 8177: *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
! 8178: esac
! 8179: # Do not add duplicates
! 8180: if test "$installed" = yes && test "$D"; then
! 8181: install_libdir=`echo "$install_libdir" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
! 8182: fi
! 8183: $ECHO > $output "\
! 8184: # $outputname - a libtool library file
! 8185: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 8186: #
! 8187: # Please DO NOT delete this file!
! 8188: # It is necessary for linking the library.
! 8189:
! 8190: # The name that we can dlopen(3).
! 8191: dlname='$tdlname'
! 8192:
! 8193: # Names of this library.
! 8194: library_names='$library_names'
! 8195:
! 8196: # The name of the static archive.
! 8197: old_library='$old_library'
! 8198:
! 8199: # Linker flags that can not go in dependency_libs.
! 8200: inherited_linker_flags='$new_inherited_linker_flags'
! 8201:
! 8202: # Libraries that this one depends upon.
! 8203: dependency_libs='$dependency_libs'
! 8204:
! 8205: # Names of additional weak libraries provided by this library
! 8206: weak_library_names='$weak_libs'
! 8207:
! 8208: # Version information for $libname.
! 8209: current=$current
! 8210: age=$age
! 8211: revision=$revision
! 8212:
! 8213: # Is this an already installed library?
! 8214: installed=$installed
! 8215:
! 8216: # Should we warn about portability when linking against -modules?
! 8217: shouldnotlink=$module
! 8218:
! 8219: # Files to dlopen/dlpreopen
! 8220: dlopen='$dlfiles'
! 8221: dlpreopen='$dlprefiles'
! 8222:
! 8223: # Directory that this library needs to be installed in:
! 8224: libdir='$install_libdir'"
! 8225: if test "$installed" = no && test "$need_relink" = yes; then
! 8226: $ECHO >> $output "\
! 8227: relink_command=\"$relink_command\""
! 8228: fi
! 8229: done
! 8230: }
! 8231:
! 8232: # Do a symbolic link so that the libtool archive can be found in
! 8233: # LD_LIBRARY_PATH before the program is installed.
! 8234: func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
! 8235: ;;
! 8236: esac
! 8237: exit $EXIT_SUCCESS
! 8238: }
! 8239:
! 8240: { test "$mode" = link || test "$mode" = relink; } &&
! 8241: func_mode_link ${1+"$@"}
! 8242:
! 8243:
! 8244: # func_mode_uninstall arg...
! 8245: func_mode_uninstall ()
! 8246: {
! 8247: $opt_debug
! 8248: RM="$nonopt"
! 8249: files=
! 8250: rmforce=
! 8251: exit_status=0
! 8252:
! 8253: # This variable tells wrapper scripts just to set variables rather
! 8254: # than running their programs.
! 8255: libtool_install_magic="$magic"
! 8256:
! 8257: for arg
! 8258: do
! 8259: case $arg in
! 8260: -f) RM="$RM $arg"; rmforce=yes ;;
! 8261: -*) RM="$RM $arg" ;;
! 8262: *) files="$files $arg" ;;
! 8263: esac
! 8264: done
! 8265:
! 8266: test -z "$RM" && \
! 8267: func_fatal_help "you must specify an RM program"
! 8268:
! 8269: rmdirs=
! 8270:
! 8271: origobjdir="$objdir"
! 8272: for file in $files; do
! 8273: func_dirname "$file" "" "."
! 8274: dir="$func_dirname_result"
! 8275: if test "X$dir" = X.; then
! 8276: objdir="$origobjdir"
! 8277: else
! 8278: objdir="$dir/$origobjdir"
! 8279: fi
! 8280: func_basename "$file"
! 8281: name="$func_basename_result"
! 8282: test "$mode" = uninstall && objdir="$dir"
! 8283:
! 8284: # Remember objdir for removal later, being careful to avoid duplicates
! 8285: if test "$mode" = clean; then
! 8286: case " $rmdirs " in
! 8287: *" $objdir "*) ;;
! 8288: *) rmdirs="$rmdirs $objdir" ;;
! 8289: esac
! 8290: fi
! 8291:
! 8292: # Don't error if the file doesn't exist and rm -f was used.
! 8293: if { test -L "$file"; } >/dev/null 2>&1 ||
! 8294: { test -h "$file"; } >/dev/null 2>&1 ||
! 8295: test -f "$file"; then
! 8296: :
! 8297: elif test -d "$file"; then
! 8298: exit_status=1
! 8299: continue
! 8300: elif test "$rmforce" = yes; then
! 8301: continue
! 8302: fi
! 8303:
! 8304: rmfiles="$file"
! 8305:
! 8306: case $name in
! 8307: *.la)
! 8308: # Possibly a libtool archive, so verify it.
! 8309: if func_lalib_p "$file"; then
! 8310: func_source $dir/$name
! 8311:
! 8312: # Delete the libtool libraries and symlinks.
! 8313: for n in $library_names; do
! 8314: rmfiles="$rmfiles $objdir/$n"
! 8315: done
! 8316: test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
! 8317:
! 8318: case "$mode" in
! 8319: clean)
! 8320: case " $library_names " in
! 8321: # " " in the beginning catches empty $dlname
! 8322: *" $dlname "*) ;;
! 8323: *) rmfiles="$rmfiles $objdir/$dlname" ;;
! 8324: esac
! 8325: test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
! 8326: ;;
! 8327: uninstall)
! 8328: if test -n "$library_names"; then
! 8329: # Do each command in the postuninstall commands.
! 8330: func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 8331: fi
! 8332:
! 8333: if test -n "$old_library"; then
! 8334: # Do each command in the old_postuninstall commands.
! 8335: func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 8336: fi
! 8337: # FIXME: should reinstall the best remaining shared library.
! 8338: ;;
! 8339: esac
! 8340: fi
! 8341: ;;
! 8342:
! 8343: *.lo)
! 8344: # Possibly a libtool object, so verify it.
! 8345: if func_lalib_p "$file"; then
! 8346:
! 8347: # Read the .lo file
! 8348: func_source $dir/$name
! 8349:
! 8350: # Add PIC object to the list of files to remove.
! 8351: if test -n "$pic_object" &&
! 8352: test "$pic_object" != none; then
! 8353: rmfiles="$rmfiles $dir/$pic_object"
! 8354: fi
! 8355:
! 8356: # Add non-PIC object to the list of files to remove.
! 8357: if test -n "$non_pic_object" &&
! 8358: test "$non_pic_object" != none; then
! 8359: rmfiles="$rmfiles $dir/$non_pic_object"
! 8360: fi
! 8361: fi
! 8362: ;;
! 8363:
! 8364: *)
! 8365: if test "$mode" = clean ; then
! 8366: noexename=$name
! 8367: case $file in
! 8368: *.exe)
! 8369: func_stripname '' '.exe' "$file"
! 8370: file=$func_stripname_result
! 8371: func_stripname '' '.exe' "$name"
! 8372: noexename=$func_stripname_result
! 8373: # $file with .exe has already been added to rmfiles,
! 8374: # add $file without .exe
! 8375: rmfiles="$rmfiles $file"
! 8376: ;;
! 8377: esac
! 8378: # Do a test to see if this is a libtool program.
! 8379: if func_ltwrapper_p "$file"; then
! 8380: if func_ltwrapper_executable_p "$file"; then
! 8381: func_ltwrapper_scriptname "$file"
! 8382: relink_command=
! 8383: func_source $func_ltwrapper_scriptname_result
! 8384: rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
! 8385: else
! 8386: relink_command=
! 8387: func_source $dir/$noexename
! 8388: fi
! 8389:
! 8390: # note $name still contains .exe if it was in $file originally
! 8391: # as does the version of $file that was added into $rmfiles
! 8392: rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
! 8393: if test "$fast_install" = yes && test -n "$relink_command"; then
! 8394: rmfiles="$rmfiles $objdir/lt-$name"
! 8395: fi
! 8396: if test "X$noexename" != "X$name" ; then
! 8397: rmfiles="$rmfiles $objdir/lt-${noexename}.c"
! 8398: fi
! 8399: fi
! 8400: fi
! 8401: ;;
! 8402: esac
! 8403: func_show_eval "$RM $rmfiles" 'exit_status=1'
! 8404: done
! 8405: objdir="$origobjdir"
! 8406:
! 8407: # Try to remove the ${objdir}s in the directories where we deleted files
! 8408: for dir in $rmdirs; do
! 8409: if test -d "$dir"; then
! 8410: func_show_eval "rmdir $dir >/dev/null 2>&1"
! 8411: fi
! 8412: done
! 8413:
! 8414: exit $exit_status
! 8415: }
! 8416:
! 8417: { test "$mode" = uninstall || test "$mode" = clean; } &&
! 8418: func_mode_uninstall ${1+"$@"}
! 8419:
! 8420: test -z "$mode" && {
! 8421: help="$generic_help"
! 8422: func_fatal_help "you must specify a MODE"
! 8423: }
! 8424:
! 8425: test -z "$exec_cmd" && \
! 8426: func_fatal_help "invalid operation mode \`$mode'"
! 8427:
! 8428: if test -n "$exec_cmd"; then
! 8429: eval exec "$exec_cmd"
! 8430: exit $EXIT_FAILURE
! 8431: fi
! 8432:
! 8433: exit $exit_status
! 8434:
! 8435:
! 8436: # The TAGs below are defined such that we never get into a situation
! 8437: # in which we disable both kinds of libraries. Given conflicting
! 8438: # choices, we go for a static library, that is the most portable,
! 8439: # since we can't tell whether shared libraries were disabled because
! 8440: # the user asked for that or because the platform doesn't support
! 8441: # them. This is particularly important on AIX, because we don't
! 8442: # support having both static and shared libraries enabled at the same
! 8443: # time on that platform, so we default to a shared-only configuration.
! 8444: # If a disable-shared tag is given, we'll fallback to a static-only
! 8445: # configuration. But we'll never go from static-only to shared-only.
! 8446:
! 8447: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
! 8448: build_libtool_libs=no
! 8449: build_old_libs=yes
! 8450: # ### END LIBTOOL TAG CONFIG: disable-shared
! 8451:
! 8452: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
! 8453: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
! 8454: # ### END LIBTOOL TAG CONFIG: disable-static
! 8455:
! 8456: # Local Variables:
! 8457: # mode:shell-script
! 8458: # sh-indentation:2
! 8459: # End:
! 8460: # vi:sw=2
! 8461:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ltmain.sh CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / sqlite3