Annotation of embedaddon/sqlite3/src/test_demovfs.c, revision 1.1.1.1
1.1 misho 1: /*
2: ** 2010 April 7
3: **
4: ** The author disclaims copyright to this source code. In place of
5: ** a legal notice, here is a blessing:
6: **
7: ** May you do good and not evil.
8: ** May you find forgiveness for yourself and forgive others.
9: ** May you share freely, never taking more than you give.
10: **
11: *************************************************************************
12: **
13: ** This file implements an example of a simple VFS implementation that
14: ** omits complex features often not required or not possible on embedded
15: ** platforms. Code is included to buffer writes to the journal file,
16: ** which can be a significant performance improvement on some embedded
17: ** platforms.
18: **
19: ** OVERVIEW
20: **
21: ** The code in this file implements a minimal SQLite VFS that can be
22: ** used on Linux and other posix-like operating systems. The following
23: ** system calls are used:
24: **
25: ** File-system: access(), unlink(), getcwd()
26: ** File IO: open(), read(), write(), fsync(), close(), fstat()
27: ** Other: sleep(), usleep(), time()
28: **
29: ** The following VFS features are omitted:
30: **
31: ** 1. File locking. The user must ensure that there is at most one
32: ** connection to each database when using this VFS. Multiple
33: ** connections to a single shared-cache count as a single connection
34: ** for the purposes of the previous statement.
35: **
36: ** 2. The loading of dynamic extensions (shared libraries).
37: **
38: ** 3. Temporary files. The user must configure SQLite to use in-memory
39: ** temp files when using this VFS. The easiest way to do this is to
40: ** compile with:
41: **
42: ** -DSQLITE_TEMP_STORE=3
43: **
44: ** 4. File truncation. As of version 3.6.24, SQLite may run without
45: ** a working xTruncate() call, providing the user does not configure
46: ** SQLite to use "journal_mode=truncate", or use both
47: ** "journal_mode=persist" and ATTACHed databases.
48: **
49: ** It is assumed that the system uses UNIX-like path-names. Specifically,
50: ** that '/' characters are used to separate path components and that
51: ** a path-name is a relative path unless it begins with a '/'. And that
52: ** no UTF-8 encoded paths are greater than 512 bytes in length.
53: **
54: ** JOURNAL WRITE-BUFFERING
55: **
56: ** To commit a transaction to the database, SQLite first writes rollback
57: ** information into the journal file. This usually consists of 4 steps:
58: **
59: ** 1. The rollback information is sequentially written into the journal
60: ** file, starting at the start of the file.
61: ** 2. The journal file is synced to disk.
62: ** 3. A modification is made to the first few bytes of the journal file.
63: ** 4. The journal file is synced to disk again.
64: **
65: ** Most of the data is written in step 1 using a series of calls to the
66: ** VFS xWrite() method. The buffers passed to the xWrite() calls are of
67: ** various sizes. For example, as of version 3.6.24, when committing a
68: ** transaction that modifies 3 pages of a database file that uses 4096
69: ** byte pages residing on a media with 512 byte sectors, SQLite makes
70: ** eleven calls to the xWrite() method to create the rollback journal,
71: ** as follows:
72: **
73: ** Write offset | Bytes written
74: ** ----------------------------
75: ** 0 512
76: ** 512 4
77: ** 516 4096
78: ** 4612 4
79: ** 4616 4
80: ** 4620 4096
81: ** 8716 4
82: ** 8720 4
83: ** 8724 4096
84: ** 12820 4
85: ** ++++++++++++SYNC+++++++++++
86: ** 0 12
87: ** ++++++++++++SYNC+++++++++++
88: **
89: ** On many operating systems, this is an efficient way to write to a file.
90: ** However, on some embedded systems that do not cache writes in OS
91: ** buffers it is much more efficient to write data in blocks that are
92: ** an integer multiple of the sector-size in size and aligned at the
93: ** start of a sector.
94: **
95: ** To work around this, the code in this file allocates a fixed size
96: ** buffer of SQLITE_DEMOVFS_BUFFERSZ using sqlite3_malloc() whenever a
97: ** journal file is opened. It uses the buffer to coalesce sequential
98: ** writes into aligned SQLITE_DEMOVFS_BUFFERSZ blocks. When SQLite
99: ** invokes the xSync() method to sync the contents of the file to disk,
100: ** all accumulated data is written out, even if it does not constitute
101: ** a complete block. This means the actual IO to create the rollback
102: ** journal for the example transaction above is this:
103: **
104: ** Write offset | Bytes written
105: ** ----------------------------
106: ** 0 8192
107: ** 8192 4632
108: ** ++++++++++++SYNC+++++++++++
109: ** 0 12
110: ** ++++++++++++SYNC+++++++++++
111: **
112: ** Much more efficient if the underlying OS is not caching write
113: ** operations.
114: */
115:
116: #if !defined(SQLITE_TEST) || SQLITE_OS_UNIX
117:
118: #include <sqlite3.h>
119:
120: #include <assert.h>
121: #include <string.h>
122: #include <sys/types.h>
123: #include <sys/stat.h>
124: #include <sys/file.h>
125: #include <sys/param.h>
126: #include <unistd.h>
127: #include <time.h>
128: #include <errno.h>
129: #include <fcntl.h>
130:
131: /*
132: ** Size of the write buffer used by journal files in bytes.
133: */
134: #ifndef SQLITE_DEMOVFS_BUFFERSZ
135: # define SQLITE_DEMOVFS_BUFFERSZ 8192
136: #endif
137:
138: /*
139: ** The maximum pathname length supported by this VFS.
140: */
141: #define MAXPATHNAME 512
142:
143: /*
144: ** When using this VFS, the sqlite3_file* handles that SQLite uses are
145: ** actually pointers to instances of type DemoFile.
146: */
147: typedef struct DemoFile DemoFile;
148: struct DemoFile {
149: sqlite3_file base; /* Base class. Must be first. */
150: int fd; /* File descriptor */
151:
152: char *aBuffer; /* Pointer to malloc'd buffer */
153: int nBuffer; /* Valid bytes of data in zBuffer */
154: sqlite3_int64 iBufferOfst; /* Offset in file of zBuffer[0] */
155: };
156:
157: /*
158: ** Write directly to the file passed as the first argument. Even if the
159: ** file has a write-buffer (DemoFile.aBuffer), ignore it.
160: */
161: static int demoDirectWrite(
162: DemoFile *p, /* File handle */
163: const void *zBuf, /* Buffer containing data to write */
164: int iAmt, /* Size of data to write in bytes */
165: sqlite_int64 iOfst /* File offset to write to */
166: ){
167: off_t ofst; /* Return value from lseek() */
168: size_t nWrite; /* Return value from write() */
169:
170: ofst = lseek(p->fd, iOfst, SEEK_SET);
171: if( ofst!=iOfst ){
172: return SQLITE_IOERR_WRITE;
173: }
174:
175: nWrite = write(p->fd, zBuf, iAmt);
176: if( nWrite!=iAmt ){
177: return SQLITE_IOERR_WRITE;
178: }
179:
180: return SQLITE_OK;
181: }
182:
183: /*
184: ** Flush the contents of the DemoFile.aBuffer buffer to disk. This is a
185: ** no-op if this particular file does not have a buffer (i.e. it is not
186: ** a journal file) or if the buffer is currently empty.
187: */
188: static int demoFlushBuffer(DemoFile *p){
189: int rc = SQLITE_OK;
190: if( p->nBuffer ){
191: rc = demoDirectWrite(p, p->aBuffer, p->nBuffer, p->iBufferOfst);
192: p->nBuffer = 0;
193: }
194: return rc;
195: }
196:
197: /*
198: ** Close a file.
199: */
200: static int demoClose(sqlite3_file *pFile){
201: int rc;
202: DemoFile *p = (DemoFile*)pFile;
203: rc = demoFlushBuffer(p);
204: sqlite3_free(p->aBuffer);
205: close(p->fd);
206: return rc;
207: }
208:
209: /*
210: ** Read data from a file.
211: */
212: static int demoRead(
213: sqlite3_file *pFile,
214: void *zBuf,
215: int iAmt,
216: sqlite_int64 iOfst
217: ){
218: DemoFile *p = (DemoFile*)pFile;
219: off_t ofst; /* Return value from lseek() */
220: int nRead; /* Return value from read() */
221: int rc; /* Return code from demoFlushBuffer() */
222:
223: /* Flush any data in the write buffer to disk in case this operation
224: ** is trying to read data the file-region currently cached in the buffer.
225: ** It would be possible to detect this case and possibly save an
226: ** unnecessary write here, but in practice SQLite will rarely read from
227: ** a journal file when there is data cached in the write-buffer.
228: */
229: rc = demoFlushBuffer(p);
230: if( rc!=SQLITE_OK ){
231: return rc;
232: }
233:
234: ofst = lseek(p->fd, iOfst, SEEK_SET);
235: if( ofst!=iOfst ){
236: return SQLITE_IOERR_READ;
237: }
238: nRead = read(p->fd, zBuf, iAmt);
239:
240: if( nRead==iAmt ){
241: return SQLITE_OK;
242: }else if( nRead>=0 ){
243: return SQLITE_IOERR_SHORT_READ;
244: }
245:
246: return SQLITE_IOERR_READ;
247: }
248:
249: /*
250: ** Write data to a crash-file.
251: */
252: static int demoWrite(
253: sqlite3_file *pFile,
254: const void *zBuf,
255: int iAmt,
256: sqlite_int64 iOfst
257: ){
258: DemoFile *p = (DemoFile*)pFile;
259:
260: if( p->aBuffer ){
261: char *z = (char *)zBuf; /* Pointer to remaining data to write */
262: int n = iAmt; /* Number of bytes at z */
263: sqlite3_int64 i = iOfst; /* File offset to write to */
264:
265: while( n>0 ){
266: int nCopy; /* Number of bytes to copy into buffer */
267:
268: /* If the buffer is full, or if this data is not being written directly
269: ** following the data already buffered, flush the buffer. Flushing
270: ** the buffer is a no-op if it is empty.
271: */
272: if( p->nBuffer==SQLITE_DEMOVFS_BUFFERSZ || p->iBufferOfst+p->nBuffer!=i ){
273: int rc = demoFlushBuffer(p);
274: if( rc!=SQLITE_OK ){
275: return rc;
276: }
277: }
278: assert( p->nBuffer==0 || p->iBufferOfst+p->nBuffer==i );
279: p->iBufferOfst = i - p->nBuffer;
280:
281: /* Copy as much data as possible into the buffer. */
282: nCopy = SQLITE_DEMOVFS_BUFFERSZ - p->nBuffer;
283: if( nCopy>n ){
284: nCopy = n;
285: }
286: memcpy(&p->aBuffer[p->nBuffer], z, nCopy);
287: p->nBuffer += nCopy;
288:
289: n -= nCopy;
290: i += nCopy;
291: z += nCopy;
292: }
293: }else{
294: return demoDirectWrite(p, zBuf, iAmt, iOfst);
295: }
296:
297: return SQLITE_OK;
298: }
299:
300: /*
301: ** Truncate a file. This is a no-op for this VFS (see header comments at
302: ** the top of the file).
303: */
304: static int demoTruncate(sqlite3_file *pFile, sqlite_int64 size){
305: #if 0
306: if( ftruncate(((DemoFile *)pFile)->fd, size) ) return SQLITE_IOERR_TRUNCATE;
307: #endif
308: return SQLITE_OK;
309: }
310:
311: /*
312: ** Sync the contents of the file to the persistent media.
313: */
314: static int demoSync(sqlite3_file *pFile, int flags){
315: DemoFile *p = (DemoFile*)pFile;
316: int rc;
317:
318: rc = demoFlushBuffer(p);
319: if( rc!=SQLITE_OK ){
320: return rc;
321: }
322:
323: rc = fsync(p->fd);
324: return (rc==0 ? SQLITE_OK : SQLITE_IOERR_FSYNC);
325: }
326:
327: /*
328: ** Write the size of the file in bytes to *pSize.
329: */
330: static int demoFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){
331: DemoFile *p = (DemoFile*)pFile;
332: int rc; /* Return code from fstat() call */
333: struct stat sStat; /* Output of fstat() call */
334:
335: /* Flush the contents of the buffer to disk. As with the flush in the
336: ** demoRead() method, it would be possible to avoid this and save a write
337: ** here and there. But in practice this comes up so infrequently it is
338: ** not worth the trouble.
339: */
340: rc = demoFlushBuffer(p);
341: if( rc!=SQLITE_OK ){
342: return rc;
343: }
344:
345: rc = fstat(p->fd, &sStat);
346: if( rc!=0 ) return SQLITE_IOERR_FSTAT;
347: *pSize = sStat.st_size;
348: return SQLITE_OK;
349: }
350:
351: /*
352: ** Locking functions. The xLock() and xUnlock() methods are both no-ops.
353: ** The xCheckReservedLock() always indicates that no other process holds
354: ** a reserved lock on the database file. This ensures that if a hot-journal
355: ** file is found in the file-system it is rolled back.
356: */
357: static int demoLock(sqlite3_file *pFile, int eLock){
358: return SQLITE_OK;
359: }
360: static int demoUnlock(sqlite3_file *pFile, int eLock){
361: return SQLITE_OK;
362: }
363: static int demoCheckReservedLock(sqlite3_file *pFile, int *pResOut){
364: *pResOut = 0;
365: return SQLITE_OK;
366: }
367:
368: /*
369: ** No xFileControl() verbs are implemented by this VFS.
370: */
371: static int demoFileControl(sqlite3_file *pFile, int op, void *pArg){
372: return SQLITE_OK;
373: }
374:
375: /*
376: ** The xSectorSize() and xDeviceCharacteristics() methods. These two
377: ** may return special values allowing SQLite to optimize file-system
378: ** access to some extent. But it is also safe to simply return 0.
379: */
380: static int demoSectorSize(sqlite3_file *pFile){
381: return 0;
382: }
383: static int demoDeviceCharacteristics(sqlite3_file *pFile){
384: return 0;
385: }
386:
387: /*
388: ** Open a file handle.
389: */
390: static int demoOpen(
391: sqlite3_vfs *pVfs, /* VFS */
392: const char *zName, /* File to open, or 0 for a temp file */
393: sqlite3_file *pFile, /* Pointer to DemoFile struct to populate */
394: int flags, /* Input SQLITE_OPEN_XXX flags */
395: int *pOutFlags /* Output SQLITE_OPEN_XXX flags (or NULL) */
396: ){
397: static const sqlite3_io_methods demoio = {
398: 1, /* iVersion */
399: demoClose, /* xClose */
400: demoRead, /* xRead */
401: demoWrite, /* xWrite */
402: demoTruncate, /* xTruncate */
403: demoSync, /* xSync */
404: demoFileSize, /* xFileSize */
405: demoLock, /* xLock */
406: demoUnlock, /* xUnlock */
407: demoCheckReservedLock, /* xCheckReservedLock */
408: demoFileControl, /* xFileControl */
409: demoSectorSize, /* xSectorSize */
410: demoDeviceCharacteristics /* xDeviceCharacteristics */
411: };
412:
413: DemoFile *p = (DemoFile*)pFile; /* Populate this structure */
414: int oflags = 0; /* flags to pass to open() call */
415: char *aBuf = 0;
416:
417: if( zName==0 ){
418: return SQLITE_IOERR;
419: }
420:
421: if( flags&SQLITE_OPEN_MAIN_JOURNAL ){
422: aBuf = (char *)sqlite3_malloc(SQLITE_DEMOVFS_BUFFERSZ);
423: if( !aBuf ){
424: return SQLITE_NOMEM;
425: }
426: }
427:
428: if( flags&SQLITE_OPEN_EXCLUSIVE ) oflags |= O_EXCL;
429: if( flags&SQLITE_OPEN_CREATE ) oflags |= O_CREAT;
430: if( flags&SQLITE_OPEN_READONLY ) oflags |= O_RDONLY;
431: if( flags&SQLITE_OPEN_READWRITE ) oflags |= O_RDWR;
432:
433: memset(p, 0, sizeof(DemoFile));
434: p->fd = open(zName, oflags, 0600);
435: if( p->fd<0 ){
436: sqlite3_free(aBuf);
437: return SQLITE_CANTOPEN;
438: }
439: p->aBuffer = aBuf;
440:
441: if( pOutFlags ){
442: *pOutFlags = flags;
443: }
444: p->base.pMethods = &demoio;
445: return SQLITE_OK;
446: }
447:
448: /*
449: ** Delete the file identified by argument zPath. If the dirSync parameter
450: ** is non-zero, then ensure the file-system modification to delete the
451: ** file has been synced to disk before returning.
452: */
453: static int demoDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){
454: int rc; /* Return code */
455:
456: rc = unlink(zPath);
457: if( rc!=0 && errno==ENOENT ) return SQLITE_OK;
458:
459: if( rc==0 && dirSync ){
460: int dfd; /* File descriptor open on directory */
461: int i; /* Iterator variable */
462: char zDir[MAXPATHNAME+1]; /* Name of directory containing file zPath */
463:
464: /* Figure out the directory name from the path of the file deleted. */
465: sqlite3_snprintf(MAXPATHNAME, zDir, "%s", zPath);
466: zDir[MAXPATHNAME] = '\0';
467: for(i=strlen(zDir); i>1 && zDir[i]!='/'; i++);
468: zDir[i] = '\0';
469:
470: /* Open a file-descriptor on the directory. Sync. Close. */
471: dfd = open(zDir, O_RDONLY, 0);
472: if( dfd<0 ){
473: rc = -1;
474: }else{
475: rc = fsync(dfd);
476: close(dfd);
477: }
478: }
479: return (rc==0 ? SQLITE_OK : SQLITE_IOERR_DELETE);
480: }
481:
482: #ifndef F_OK
483: # define F_OK 0
484: #endif
485: #ifndef R_OK
486: # define R_OK 4
487: #endif
488: #ifndef W_OK
489: # define W_OK 2
490: #endif
491:
492: /*
493: ** Query the file-system to see if the named file exists, is readable or
494: ** is both readable and writable.
495: */
496: static int demoAccess(
497: sqlite3_vfs *pVfs,
498: const char *zPath,
499: int flags,
500: int *pResOut
501: ){
502: int rc; /* access() return code */
503: int eAccess = F_OK; /* Second argument to access() */
504:
505: assert( flags==SQLITE_ACCESS_EXISTS /* access(zPath, F_OK) */
506: || flags==SQLITE_ACCESS_READ /* access(zPath, R_OK) */
507: || flags==SQLITE_ACCESS_READWRITE /* access(zPath, R_OK|W_OK) */
508: );
509:
510: if( flags==SQLITE_ACCESS_READWRITE ) eAccess = R_OK|W_OK;
511: if( flags==SQLITE_ACCESS_READ ) eAccess = R_OK;
512:
513: rc = access(zPath, eAccess);
514: *pResOut = (rc==0);
515: return SQLITE_OK;
516: }
517:
518: /*
519: ** Argument zPath points to a nul-terminated string containing a file path.
520: ** If zPath is an absolute path, then it is copied as is into the output
521: ** buffer. Otherwise, if it is a relative path, then the equivalent full
522: ** path is written to the output buffer.
523: **
524: ** This function assumes that paths are UNIX style. Specifically, that:
525: **
526: ** 1. Path components are separated by a '/'. and
527: ** 2. Full paths begin with a '/' character.
528: */
529: static int demoFullPathname(
530: sqlite3_vfs *pVfs, /* VFS */
531: const char *zPath, /* Input path (possibly a relative path) */
532: int nPathOut, /* Size of output buffer in bytes */
533: char *zPathOut /* Pointer to output buffer */
534: ){
535: char zDir[MAXPATHNAME+1];
536: if( zPath[0]=='/' ){
537: zDir[0] = '\0';
538: }else{
539: getcwd(zDir, sizeof(zDir));
540: }
541: zDir[MAXPATHNAME] = '\0';
542:
543: sqlite3_snprintf(nPathOut, zPathOut, "%s/%s", zDir, zPath);
544: zPathOut[nPathOut-1] = '\0';
545:
546: return SQLITE_OK;
547: }
548:
549: /*
550: ** The following four VFS methods:
551: **
552: ** xDlOpen
553: ** xDlError
554: ** xDlSym
555: ** xDlClose
556: **
557: ** are supposed to implement the functionality needed by SQLite to load
558: ** extensions compiled as shared objects. This simple VFS does not support
559: ** this functionality, so the following functions are no-ops.
560: */
561: static void *demoDlOpen(sqlite3_vfs *pVfs, const char *zPath){
562: return 0;
563: }
564: static void demoDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){
565: sqlite3_snprintf(nByte, zErrMsg, "Loadable extensions are not supported");
566: zErrMsg[nByte-1] = '\0';
567: }
568: static void (*demoDlSym(sqlite3_vfs *pVfs, void *pH, const char *z))(void){
569: return 0;
570: }
571: static void demoDlClose(sqlite3_vfs *pVfs, void *pHandle){
572: return;
573: }
574:
575: /*
576: ** Parameter zByte points to a buffer nByte bytes in size. Populate this
577: ** buffer with pseudo-random data.
578: */
579: static int demoRandomness(sqlite3_vfs *pVfs, int nByte, char *zByte){
580: return SQLITE_OK;
581: }
582:
583: /*
584: ** Sleep for at least nMicro microseconds. Return the (approximate) number
585: ** of microseconds slept for.
586: */
587: static int demoSleep(sqlite3_vfs *pVfs, int nMicro){
588: sleep(nMicro / 1000000);
589: usleep(nMicro % 1000000);
590: return nMicro;
591: }
592:
593: /*
594: ** Set *pTime to the current UTC time expressed as a Julian day. Return
595: ** SQLITE_OK if successful, or an error code otherwise.
596: **
597: ** http://en.wikipedia.org/wiki/Julian_day
598: **
599: ** This implementation is not very good. The current time is rounded to
600: ** an integer number of seconds. Also, assuming time_t is a signed 32-bit
601: ** value, it will stop working some time in the year 2038 AD (the so-called
602: ** "year 2038" problem that afflicts systems that store time this way).
603: */
604: static int demoCurrentTime(sqlite3_vfs *pVfs, double *pTime){
605: time_t t = time(0);
606: *pTime = t/86400.0 + 2440587.5;
607: return SQLITE_OK;
608: }
609:
610: /*
611: ** This function returns a pointer to the VFS implemented in this file.
612: ** To make the VFS available to SQLite:
613: **
614: ** sqlite3_vfs_register(sqlite3_demovfs(), 0);
615: */
616: sqlite3_vfs *sqlite3_demovfs(void){
617: static sqlite3_vfs demovfs = {
618: 1, /* iVersion */
619: sizeof(DemoFile), /* szOsFile */
620: MAXPATHNAME, /* mxPathname */
621: 0, /* pNext */
622: "demo", /* zName */
623: 0, /* pAppData */
624: demoOpen, /* xOpen */
625: demoDelete, /* xDelete */
626: demoAccess, /* xAccess */
627: demoFullPathname, /* xFullPathname */
628: demoDlOpen, /* xDlOpen */
629: demoDlError, /* xDlError */
630: demoDlSym, /* xDlSym */
631: demoDlClose, /* xDlClose */
632: demoRandomness, /* xRandomness */
633: demoSleep, /* xSleep */
634: demoCurrentTime, /* xCurrentTime */
635: };
636: return &demovfs;
637: }
638:
639: #endif /* !defined(SQLITE_TEST) || SQLITE_OS_UNIX */
640:
641:
642: #ifdef SQLITE_TEST
643:
644: #include <tcl.h>
645:
646: #if SQLITE_OS_UNIX
647: static int register_demovfs(
648: ClientData clientData, /* Pointer to sqlite3_enable_XXX function */
649: Tcl_Interp *interp, /* The TCL interpreter that invoked this command */
650: int objc, /* Number of arguments */
651: Tcl_Obj *CONST objv[] /* Command arguments */
652: ){
653: sqlite3_vfs_register(sqlite3_demovfs(), 1);
654: return TCL_OK;
655: }
656: static int unregister_demovfs(
657: ClientData clientData, /* Pointer to sqlite3_enable_XXX function */
658: Tcl_Interp *interp, /* The TCL interpreter that invoked this command */
659: int objc, /* Number of arguments */
660: Tcl_Obj *CONST objv[] /* Command arguments */
661: ){
662: sqlite3_vfs_unregister(sqlite3_demovfs());
663: return TCL_OK;
664: }
665:
666: /*
667: ** Register commands with the TCL interpreter.
668: */
669: int Sqlitetest_demovfs_Init(Tcl_Interp *interp){
670: Tcl_CreateObjCommand(interp, "register_demovfs", register_demovfs, 0, 0);
671: Tcl_CreateObjCommand(interp, "unregister_demovfs", unregister_demovfs, 0, 0);
672: return TCL_OK;
673: }
674:
675: #else
676: int Sqlitetest_demovfs_Init(Tcl_Interp *interp){ return TCL_OK; }
677: #endif
678:
679: #endif /* SQLITE_TEST */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>