Annotation of embedaddon/sqlite3/src/utf.c, revision 1.1.1.1

1.1       misho       1: /*
                      2: ** 2004 April 13
                      3: **
                      4: ** The author disclaims copyright to this source code.  In place of
                      5: ** a legal notice, here is a blessing:
                      6: **
                      7: **    May you do good and not evil.
                      8: **    May you find forgiveness for yourself and forgive others.
                      9: **    May you share freely, never taking more than you give.
                     10: **
                     11: *************************************************************************
                     12: ** This file contains routines used to translate between UTF-8, 
                     13: ** UTF-16, UTF-16BE, and UTF-16LE.
                     14: **
                     15: ** Notes on UTF-8:
                     16: **
                     17: **   Byte-0    Byte-1    Byte-2    Byte-3    Value
                     18: **  0xxxxxxx                                 00000000 00000000 0xxxxxxx
                     19: **  110yyyyy  10xxxxxx                       00000000 00000yyy yyxxxxxx
                     20: **  1110zzzz  10yyyyyy  10xxxxxx             00000000 zzzzyyyy yyxxxxxx
                     21: **  11110uuu  10uuzzzz  10yyyyyy  10xxxxxx   000uuuuu zzzzyyyy yyxxxxxx
                     22: **
                     23: **
                     24: ** Notes on UTF-16:  (with wwww+1==uuuuu)
                     25: **
                     26: **      Word-0               Word-1          Value
                     27: **  110110ww wwzzzzyy   110111yy yyxxxxxx    000uuuuu zzzzyyyy yyxxxxxx
                     28: **  zzzzyyyy yyxxxxxx                        00000000 zzzzyyyy yyxxxxxx
                     29: **
                     30: **
                     31: ** BOM or Byte Order Mark:
                     32: **     0xff 0xfe   little-endian utf-16 follows
                     33: **     0xfe 0xff   big-endian utf-16 follows
                     34: **
                     35: */
                     36: #include "sqliteInt.h"
                     37: #include <assert.h>
                     38: #include "vdbeInt.h"
                     39: 
                     40: #ifndef SQLITE_AMALGAMATION
                     41: /*
                     42: ** The following constant value is used by the SQLITE_BIGENDIAN and
                     43: ** SQLITE_LITTLEENDIAN macros.
                     44: */
                     45: const int sqlite3one = 1;
                     46: #endif /* SQLITE_AMALGAMATION */
                     47: 
                     48: /*
                     49: ** This lookup table is used to help decode the first byte of
                     50: ** a multi-byte UTF8 character.
                     51: */
                     52: static const unsigned char sqlite3Utf8Trans1[] = {
                     53:   0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
                     54:   0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
                     55:   0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
                     56:   0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
                     57:   0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
                     58:   0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
                     59:   0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
                     60:   0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00,
                     61: };
                     62: 
                     63: 
                     64: #define WRITE_UTF8(zOut, c) {                          \
                     65:   if( c<0x00080 ){                                     \
                     66:     *zOut++ = (u8)(c&0xFF);                            \
                     67:   }                                                    \
                     68:   else if( c<0x00800 ){                                \
                     69:     *zOut++ = 0xC0 + (u8)((c>>6)&0x1F);                \
                     70:     *zOut++ = 0x80 + (u8)(c & 0x3F);                   \
                     71:   }                                                    \
                     72:   else if( c<0x10000 ){                                \
                     73:     *zOut++ = 0xE0 + (u8)((c>>12)&0x0F);               \
                     74:     *zOut++ = 0x80 + (u8)((c>>6) & 0x3F);              \
                     75:     *zOut++ = 0x80 + (u8)(c & 0x3F);                   \
                     76:   }else{                                               \
                     77:     *zOut++ = 0xF0 + (u8)((c>>18) & 0x07);             \
                     78:     *zOut++ = 0x80 + (u8)((c>>12) & 0x3F);             \
                     79:     *zOut++ = 0x80 + (u8)((c>>6) & 0x3F);              \
                     80:     *zOut++ = 0x80 + (u8)(c & 0x3F);                   \
                     81:   }                                                    \
                     82: }
                     83: 
                     84: #define WRITE_UTF16LE(zOut, c) {                                    \
                     85:   if( c<=0xFFFF ){                                                  \
                     86:     *zOut++ = (u8)(c&0x00FF);                                       \
                     87:     *zOut++ = (u8)((c>>8)&0x00FF);                                  \
                     88:   }else{                                                            \
                     89:     *zOut++ = (u8)(((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0));  \
                     90:     *zOut++ = (u8)(0x00D8 + (((c-0x10000)>>18)&0x03));              \
                     91:     *zOut++ = (u8)(c&0x00FF);                                       \
                     92:     *zOut++ = (u8)(0x00DC + ((c>>8)&0x03));                         \
                     93:   }                                                                 \
                     94: }
                     95: 
                     96: #define WRITE_UTF16BE(zOut, c) {                                    \
                     97:   if( c<=0xFFFF ){                                                  \
                     98:     *zOut++ = (u8)((c>>8)&0x00FF);                                  \
                     99:     *zOut++ = (u8)(c&0x00FF);                                       \
                    100:   }else{                                                            \
                    101:     *zOut++ = (u8)(0x00D8 + (((c-0x10000)>>18)&0x03));              \
                    102:     *zOut++ = (u8)(((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0));  \
                    103:     *zOut++ = (u8)(0x00DC + ((c>>8)&0x03));                         \
                    104:     *zOut++ = (u8)(c&0x00FF);                                       \
                    105:   }                                                                 \
                    106: }
                    107: 
                    108: #define READ_UTF16LE(zIn, TERM, c){                                   \
                    109:   c = (*zIn++);                                                       \
                    110:   c += ((*zIn++)<<8);                                                 \
                    111:   if( c>=0xD800 && c<0xE000 && TERM ){                                \
                    112:     int c2 = (*zIn++);                                                \
                    113:     c2 += ((*zIn++)<<8);                                              \
                    114:     c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10);   \
                    115:   }                                                                   \
                    116: }
                    117: 
                    118: #define READ_UTF16BE(zIn, TERM, c){                                   \
                    119:   c = ((*zIn++)<<8);                                                  \
                    120:   c += (*zIn++);                                                      \
                    121:   if( c>=0xD800 && c<0xE000 && TERM ){                                \
                    122:     int c2 = ((*zIn++)<<8);                                           \
                    123:     c2 += (*zIn++);                                                   \
                    124:     c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10);   \
                    125:   }                                                                   \
                    126: }
                    127: 
                    128: /*
                    129: ** Translate a single UTF-8 character.  Return the unicode value.
                    130: **
                    131: ** During translation, assume that the byte that zTerm points
                    132: ** is a 0x00.
                    133: **
                    134: ** Write a pointer to the next unread byte back into *pzNext.
                    135: **
                    136: ** Notes On Invalid UTF-8:
                    137: **
                    138: **  *  This routine never allows a 7-bit character (0x00 through 0x7f) to
                    139: **     be encoded as a multi-byte character.  Any multi-byte character that
                    140: **     attempts to encode a value between 0x00 and 0x7f is rendered as 0xfffd.
                    141: **
                    142: **  *  This routine never allows a UTF16 surrogate value to be encoded.
                    143: **     If a multi-byte character attempts to encode a value between
                    144: **     0xd800 and 0xe000 then it is rendered as 0xfffd.
                    145: **
                    146: **  *  Bytes in the range of 0x80 through 0xbf which occur as the first
                    147: **     byte of a character are interpreted as single-byte characters
                    148: **     and rendered as themselves even though they are technically
                    149: **     invalid characters.
                    150: **
                    151: **  *  This routine accepts an infinite number of different UTF8 encodings
                    152: **     for unicode values 0x80 and greater.  It do not change over-length
                    153: **     encodings to 0xfffd as some systems recommend.
                    154: */
                    155: #define READ_UTF8(zIn, zTerm, c)                           \
                    156:   c = *(zIn++);                                            \
                    157:   if( c>=0xc0 ){                                           \
                    158:     c = sqlite3Utf8Trans1[c-0xc0];                         \
                    159:     while( zIn!=zTerm && (*zIn & 0xc0)==0x80 ){            \
                    160:       c = (c<<6) + (0x3f & *(zIn++));                      \
                    161:     }                                                      \
                    162:     if( c<0x80                                             \
                    163:         || (c&0xFFFFF800)==0xD800                          \
                    164:         || (c&0xFFFFFFFE)==0xFFFE ){  c = 0xFFFD; }        \
                    165:   }
                    166: u32 sqlite3Utf8Read(
                    167:   const unsigned char *zIn,       /* First byte of UTF-8 character */
                    168:   const unsigned char **pzNext    /* Write first byte past UTF-8 char here */
                    169: ){
                    170:   unsigned int c;
                    171: 
                    172:   /* Same as READ_UTF8() above but without the zTerm parameter.
                    173:   ** For this routine, we assume the UTF8 string is always zero-terminated.
                    174:   */
                    175:   c = *(zIn++);
                    176:   if( c>=0xc0 ){
                    177:     c = sqlite3Utf8Trans1[c-0xc0];
                    178:     while( (*zIn & 0xc0)==0x80 ){
                    179:       c = (c<<6) + (0x3f & *(zIn++));
                    180:     }
                    181:     if( c<0x80
                    182:         || (c&0xFFFFF800)==0xD800
                    183:         || (c&0xFFFFFFFE)==0xFFFE ){  c = 0xFFFD; }
                    184:   }
                    185:   *pzNext = zIn;
                    186:   return c;
                    187: }
                    188: 
                    189: 
                    190: 
                    191: 
                    192: /*
                    193: ** If the TRANSLATE_TRACE macro is defined, the value of each Mem is
                    194: ** printed on stderr on the way into and out of sqlite3VdbeMemTranslate().
                    195: */ 
                    196: /* #define TRANSLATE_TRACE 1 */
                    197: 
                    198: #ifndef SQLITE_OMIT_UTF16
                    199: /*
                    200: ** This routine transforms the internal text encoding used by pMem to
                    201: ** desiredEnc. It is an error if the string is already of the desired
                    202: ** encoding, or if *pMem does not contain a string value.
                    203: */
                    204: int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){
                    205:   int len;                    /* Maximum length of output string in bytes */
                    206:   unsigned char *zOut;                  /* Output buffer */
                    207:   unsigned char *zIn;                   /* Input iterator */
                    208:   unsigned char *zTerm;                 /* End of input */
                    209:   unsigned char *z;                     /* Output iterator */
                    210:   unsigned int c;
                    211: 
                    212:   assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
                    213:   assert( pMem->flags&MEM_Str );
                    214:   assert( pMem->enc!=desiredEnc );
                    215:   assert( pMem->enc!=0 );
                    216:   assert( pMem->n>=0 );
                    217: 
                    218: #if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)
                    219:   {
                    220:     char zBuf[100];
                    221:     sqlite3VdbeMemPrettyPrint(pMem, zBuf);
                    222:     fprintf(stderr, "INPUT:  %s\n", zBuf);
                    223:   }
                    224: #endif
                    225: 
                    226:   /* If the translation is between UTF-16 little and big endian, then 
                    227:   ** all that is required is to swap the byte order. This case is handled
                    228:   ** differently from the others.
                    229:   */
                    230:   if( pMem->enc!=SQLITE_UTF8 && desiredEnc!=SQLITE_UTF8 ){
                    231:     u8 temp;
                    232:     int rc;
                    233:     rc = sqlite3VdbeMemMakeWriteable(pMem);
                    234:     if( rc!=SQLITE_OK ){
                    235:       assert( rc==SQLITE_NOMEM );
                    236:       return SQLITE_NOMEM;
                    237:     }
                    238:     zIn = (u8*)pMem->z;
                    239:     zTerm = &zIn[pMem->n&~1];
                    240:     while( zIn<zTerm ){
                    241:       temp = *zIn;
                    242:       *zIn = *(zIn+1);
                    243:       zIn++;
                    244:       *zIn++ = temp;
                    245:     }
                    246:     pMem->enc = desiredEnc;
                    247:     goto translate_out;
                    248:   }
                    249: 
                    250:   /* Set len to the maximum number of bytes required in the output buffer. */
                    251:   if( desiredEnc==SQLITE_UTF8 ){
                    252:     /* When converting from UTF-16, the maximum growth results from
                    253:     ** translating a 2-byte character to a 4-byte UTF-8 character.
                    254:     ** A single byte is required for the output string
                    255:     ** nul-terminator.
                    256:     */
                    257:     pMem->n &= ~1;
                    258:     len = pMem->n * 2 + 1;
                    259:   }else{
                    260:     /* When converting from UTF-8 to UTF-16 the maximum growth is caused
                    261:     ** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16
                    262:     ** character. Two bytes are required in the output buffer for the
                    263:     ** nul-terminator.
                    264:     */
                    265:     len = pMem->n * 2 + 2;
                    266:   }
                    267: 
                    268:   /* Set zIn to point at the start of the input buffer and zTerm to point 1
                    269:   ** byte past the end.
                    270:   **
                    271:   ** Variable zOut is set to point at the output buffer, space obtained
                    272:   ** from sqlite3_malloc().
                    273:   */
                    274:   zIn = (u8*)pMem->z;
                    275:   zTerm = &zIn[pMem->n];
                    276:   zOut = sqlite3DbMallocRaw(pMem->db, len);
                    277:   if( !zOut ){
                    278:     return SQLITE_NOMEM;
                    279:   }
                    280:   z = zOut;
                    281: 
                    282:   if( pMem->enc==SQLITE_UTF8 ){
                    283:     if( desiredEnc==SQLITE_UTF16LE ){
                    284:       /* UTF-8 -> UTF-16 Little-endian */
                    285:       while( zIn<zTerm ){
                    286:         /* c = sqlite3Utf8Read(zIn, zTerm, (const u8**)&zIn); */
                    287:         READ_UTF8(zIn, zTerm, c);
                    288:         WRITE_UTF16LE(z, c);
                    289:       }
                    290:     }else{
                    291:       assert( desiredEnc==SQLITE_UTF16BE );
                    292:       /* UTF-8 -> UTF-16 Big-endian */
                    293:       while( zIn<zTerm ){
                    294:         /* c = sqlite3Utf8Read(zIn, zTerm, (const u8**)&zIn); */
                    295:         READ_UTF8(zIn, zTerm, c);
                    296:         WRITE_UTF16BE(z, c);
                    297:       }
                    298:     }
                    299:     pMem->n = (int)(z - zOut);
                    300:     *z++ = 0;
                    301:   }else{
                    302:     assert( desiredEnc==SQLITE_UTF8 );
                    303:     if( pMem->enc==SQLITE_UTF16LE ){
                    304:       /* UTF-16 Little-endian -> UTF-8 */
                    305:       while( zIn<zTerm ){
                    306:         READ_UTF16LE(zIn, zIn<zTerm, c); 
                    307:         WRITE_UTF8(z, c);
                    308:       }
                    309:     }else{
                    310:       /* UTF-16 Big-endian -> UTF-8 */
                    311:       while( zIn<zTerm ){
                    312:         READ_UTF16BE(zIn, zIn<zTerm, c); 
                    313:         WRITE_UTF8(z, c);
                    314:       }
                    315:     }
                    316:     pMem->n = (int)(z - zOut);
                    317:   }
                    318:   *z = 0;
                    319:   assert( (pMem->n+(desiredEnc==SQLITE_UTF8?1:2))<=len );
                    320: 
                    321:   sqlite3VdbeMemRelease(pMem);
                    322:   pMem->flags &= ~(MEM_Static|MEM_Dyn|MEM_Ephem);
                    323:   pMem->enc = desiredEnc;
                    324:   pMem->flags |= (MEM_Term|MEM_Dyn);
                    325:   pMem->z = (char*)zOut;
                    326:   pMem->zMalloc = pMem->z;
                    327: 
                    328: translate_out:
                    329: #if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)
                    330:   {
                    331:     char zBuf[100];
                    332:     sqlite3VdbeMemPrettyPrint(pMem, zBuf);
                    333:     fprintf(stderr, "OUTPUT: %s\n", zBuf);
                    334:   }
                    335: #endif
                    336:   return SQLITE_OK;
                    337: }
                    338: 
                    339: /*
                    340: ** This routine checks for a byte-order mark at the beginning of the 
                    341: ** UTF-16 string stored in *pMem. If one is present, it is removed and
                    342: ** the encoding of the Mem adjusted. This routine does not do any
                    343: ** byte-swapping, it just sets Mem.enc appropriately.
                    344: **
                    345: ** The allocation (static, dynamic etc.) and encoding of the Mem may be
                    346: ** changed by this function.
                    347: */
                    348: int sqlite3VdbeMemHandleBom(Mem *pMem){
                    349:   int rc = SQLITE_OK;
                    350:   u8 bom = 0;
                    351: 
                    352:   assert( pMem->n>=0 );
                    353:   if( pMem->n>1 ){
                    354:     u8 b1 = *(u8 *)pMem->z;
                    355:     u8 b2 = *(((u8 *)pMem->z) + 1);
                    356:     if( b1==0xFE && b2==0xFF ){
                    357:       bom = SQLITE_UTF16BE;
                    358:     }
                    359:     if( b1==0xFF && b2==0xFE ){
                    360:       bom = SQLITE_UTF16LE;
                    361:     }
                    362:   }
                    363:   
                    364:   if( bom ){
                    365:     rc = sqlite3VdbeMemMakeWriteable(pMem);
                    366:     if( rc==SQLITE_OK ){
                    367:       pMem->n -= 2;
                    368:       memmove(pMem->z, &pMem->z[2], pMem->n);
                    369:       pMem->z[pMem->n] = '\0';
                    370:       pMem->z[pMem->n+1] = '\0';
                    371:       pMem->flags |= MEM_Term;
                    372:       pMem->enc = bom;
                    373:     }
                    374:   }
                    375:   return rc;
                    376: }
                    377: #endif /* SQLITE_OMIT_UTF16 */
                    378: 
                    379: /*
                    380: ** pZ is a UTF-8 encoded unicode string. If nByte is less than zero,
                    381: ** return the number of unicode characters in pZ up to (but not including)
                    382: ** the first 0x00 byte. If nByte is not less than zero, return the
                    383: ** number of unicode characters in the first nByte of pZ (or up to 
                    384: ** the first 0x00, whichever comes first).
                    385: */
                    386: int sqlite3Utf8CharLen(const char *zIn, int nByte){
                    387:   int r = 0;
                    388:   const u8 *z = (const u8*)zIn;
                    389:   const u8 *zTerm;
                    390:   if( nByte>=0 ){
                    391:     zTerm = &z[nByte];
                    392:   }else{
                    393:     zTerm = (const u8*)(-1);
                    394:   }
                    395:   assert( z<=zTerm );
                    396:   while( *z!=0 && z<zTerm ){
                    397:     SQLITE_SKIP_UTF8(z);
                    398:     r++;
                    399:   }
                    400:   return r;
                    401: }
                    402: 
                    403: /* This test function is not currently used by the automated test-suite. 
                    404: ** Hence it is only available in debug builds.
                    405: */
                    406: #if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
                    407: /*
                    408: ** Translate UTF-8 to UTF-8.
                    409: **
                    410: ** This has the effect of making sure that the string is well-formed
                    411: ** UTF-8.  Miscoded characters are removed.
                    412: **
                    413: ** The translation is done in-place and aborted if the output
                    414: ** overruns the input.
                    415: */
                    416: int sqlite3Utf8To8(unsigned char *zIn){
                    417:   unsigned char *zOut = zIn;
                    418:   unsigned char *zStart = zIn;
                    419:   u32 c;
                    420: 
                    421:   while( zIn[0] && zOut<=zIn ){
                    422:     c = sqlite3Utf8Read(zIn, (const u8**)&zIn);
                    423:     if( c!=0xfffd ){
                    424:       WRITE_UTF8(zOut, c);
                    425:     }
                    426:   }
                    427:   *zOut = 0;
                    428:   return (int)(zOut - zStart);
                    429: }
                    430: #endif
                    431: 
                    432: #ifndef SQLITE_OMIT_UTF16
                    433: /*
                    434: ** Convert a UTF-16 string in the native encoding into a UTF-8 string.
                    435: ** Memory to hold the UTF-8 string is obtained from sqlite3_malloc and must
                    436: ** be freed by the calling function.
                    437: **
                    438: ** NULL is returned if there is an allocation error.
                    439: */
                    440: char *sqlite3Utf16to8(sqlite3 *db, const void *z, int nByte, u8 enc){
                    441:   Mem m;
                    442:   memset(&m, 0, sizeof(m));
                    443:   m.db = db;
                    444:   sqlite3VdbeMemSetStr(&m, z, nByte, enc, SQLITE_STATIC);
                    445:   sqlite3VdbeChangeEncoding(&m, SQLITE_UTF8);
                    446:   if( db->mallocFailed ){
                    447:     sqlite3VdbeMemRelease(&m);
                    448:     m.z = 0;
                    449:   }
                    450:   assert( (m.flags & MEM_Term)!=0 || db->mallocFailed );
                    451:   assert( (m.flags & MEM_Str)!=0 || db->mallocFailed );
                    452:   assert( (m.flags & MEM_Dyn)!=0 || db->mallocFailed );
                    453:   assert( m.z || db->mallocFailed );
                    454:   return m.z;
                    455: }
                    456: 
                    457: /*
                    458: ** Convert a UTF-8 string to the UTF-16 encoding specified by parameter
                    459: ** enc. A pointer to the new string is returned, and the value of *pnOut
                    460: ** is set to the length of the returned string in bytes. The call should
                    461: ** arrange to call sqlite3DbFree() on the returned pointer when it is
                    462: ** no longer required.
                    463: ** 
                    464: ** If a malloc failure occurs, NULL is returned and the db.mallocFailed
                    465: ** flag set.
                    466: */
                    467: #ifdef SQLITE_ENABLE_STAT3
                    468: char *sqlite3Utf8to16(sqlite3 *db, u8 enc, char *z, int n, int *pnOut){
                    469:   Mem m;
                    470:   memset(&m, 0, sizeof(m));
                    471:   m.db = db;
                    472:   sqlite3VdbeMemSetStr(&m, z, n, SQLITE_UTF8, SQLITE_STATIC);
                    473:   if( sqlite3VdbeMemTranslate(&m, enc) ){
                    474:     assert( db->mallocFailed );
                    475:     return 0;
                    476:   }
                    477:   assert( m.z==m.zMalloc );
                    478:   *pnOut = m.n;
                    479:   return m.z;
                    480: }
                    481: #endif
                    482: 
                    483: /*
                    484: ** zIn is a UTF-16 encoded unicode string at least nChar characters long.
                    485: ** Return the number of bytes in the first nChar unicode characters
                    486: ** in pZ.  nChar must be non-negative.
                    487: */
                    488: int sqlite3Utf16ByteLen(const void *zIn, int nChar){
                    489:   int c;
                    490:   unsigned char const *z = zIn;
                    491:   int n = 0;
                    492:   
                    493:   if( SQLITE_UTF16NATIVE==SQLITE_UTF16BE ){
                    494:     while( n<nChar ){
                    495:       READ_UTF16BE(z, 1, c);
                    496:       n++;
                    497:     }
                    498:   }else{
                    499:     while( n<nChar ){
                    500:       READ_UTF16LE(z, 1, c);
                    501:       n++;
                    502:     }
                    503:   }
                    504:   return (int)(z-(unsigned char const *)zIn);
                    505: }
                    506: 
                    507: #if defined(SQLITE_TEST)
                    508: /*
                    509: ** This routine is called from the TCL test function "translate_selftest".
                    510: ** It checks that the primitives for serializing and deserializing
                    511: ** characters in each encoding are inverses of each other.
                    512: */
                    513: void sqlite3UtfSelfTest(void){
                    514:   unsigned int i, t;
                    515:   unsigned char zBuf[20];
                    516:   unsigned char *z;
                    517:   int n;
                    518:   unsigned int c;
                    519: 
                    520:   for(i=0; i<0x00110000; i++){
                    521:     z = zBuf;
                    522:     WRITE_UTF8(z, i);
                    523:     n = (int)(z-zBuf);
                    524:     assert( n>0 && n<=4 );
                    525:     z[0] = 0;
                    526:     z = zBuf;
                    527:     c = sqlite3Utf8Read(z, (const u8**)&z);
                    528:     t = i;
                    529:     if( i>=0xD800 && i<=0xDFFF ) t = 0xFFFD;
                    530:     if( (i&0xFFFFFFFE)==0xFFFE ) t = 0xFFFD;
                    531:     assert( c==t );
                    532:     assert( (z-zBuf)==n );
                    533:   }
                    534:   for(i=0; i<0x00110000; i++){
                    535:     if( i>=0xD800 && i<0xE000 ) continue;
                    536:     z = zBuf;
                    537:     WRITE_UTF16LE(z, i);
                    538:     n = (int)(z-zBuf);
                    539:     assert( n>0 && n<=4 );
                    540:     z[0] = 0;
                    541:     z = zBuf;
                    542:     READ_UTF16LE(z, 1, c);
                    543:     assert( c==i );
                    544:     assert( (z-zBuf)==n );
                    545:   }
                    546:   for(i=0; i<0x00110000; i++){
                    547:     if( i>=0xD800 && i<0xE000 ) continue;
                    548:     z = zBuf;
                    549:     WRITE_UTF16BE(z, i);
                    550:     n = (int)(z-zBuf);
                    551:     assert( n>0 && n<=4 );
                    552:     z[0] = 0;
                    553:     z = zBuf;
                    554:     READ_UTF16BE(z, 1, c);
                    555:     assert( c==i );
                    556:     assert( (z-zBuf)==n );
                    557:   }
                    558: }
                    559: #endif /* SQLITE_TEST */
                    560: #endif /* SQLITE_OMIT_UTF16 */

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>