# 2003 July 1 # # The author disclaims copyright to this source code. In place of # a legal notice, here is a blessing: # # May you do good and not evil. # May you find forgiveness for yourself and forgive others. # May you share freely, never taking more than you give. # #*********************************************************************** # This file implements regression tests for SQLite library. The # focus of this script is testing the ATTACH and DETACH commands # and related functionality. # # $Id: attach2.test,v 1.1.1.1 2012/02/21 17:04:16 misho Exp $ # set testdir [file dirname $argv0] source $testdir/tester.tcl ifcapable !attach { finish_test return } # Ticket #354 # # Databases test.db and test2.db contain identical schemas. Make # sure we can attach test2.db from test.db. # do_test attach2-1.1 { db eval { CREATE TABLE t1(a,b); CREATE INDEX x1 ON t1(a); } forcedelete test2.db forcedelete test2.db-journal sqlite3 db2 test2.db db2 eval { CREATE TABLE t1(a,b); CREATE INDEX x1 ON t1(a); } catchsql { ATTACH 'test2.db' AS t2; } } {0 {}} # Ticket #514 # proc db_list {db} { set list {} foreach {idx name file} [execsql {PRAGMA database_list} $db] { lappend list $idx $name } return $list } db eval {DETACH t2} do_test attach2-2.1 { # lock test2.db then try to attach it. This is no longer an error because # db2 just RESERVES the database. It does not obtain a write-lock until # we COMMIT. db2 eval {BEGIN} db2 eval {UPDATE t1 SET a = 0 WHERE 0} catchsql { ATTACH 'test2.db' AS t2; } } {0 {}} ifcapable schema_pragmas { do_test attach2-2.2 { # make sure test2.db did get attached. db_list db } {0 main 2 t2} } ;# ifcapable schema_pragmas db2 eval {COMMIT} do_test attach2-2.5 { # Make sure we can read test2.db from db catchsql { SELECT name FROM t2.sqlite_master; } } {0 {t1 x1}} do_test attach2-2.6 { # lock test2.db and try to read from it. This should still work because # the lock is only a RESERVED lock which does not prevent reading. # db2 eval BEGIN db2 eval {UPDATE t1 SET a = 0 WHERE 0} catchsql { SELECT name FROM t2.sqlite_master; } } {0 {t1 x1}} do_test attach2-2.7 { # but we can still read from test1.db even though test2.db is locked. catchsql { SELECT name FROM main.sqlite_master; } } {0 {t1 x1}} do_test attach2-2.8 { # start a transaction on test.db even though test2.db is locked. catchsql { BEGIN; INSERT INTO t1 VALUES(8,9); } } {0 {}} do_test attach2-2.9 { execsql { SELECT * FROM t1 } } {8 9} do_test attach2-2.10 { # now try to write to test2.db. the write should fail catchsql { INSERT INTO t2.t1 VALUES(1,2); } } {1 {database is locked}} do_test attach2-2.11 { # when the write failed in the previous test, the transaction should # have rolled back. # # Update for version 3: A transaction is no longer rolled back if a # database is found to be busy. execsql {rollback} db2 eval ROLLBACK execsql { SELECT * FROM t1 } } {} do_test attach2-2.12 { catchsql { COMMIT } } {1 {cannot commit - no transaction is active}} # Ticket #574: Make sure it works using the non-callback API # do_test attach2-3.1 { set DB [sqlite3_connection_pointer db] set rc [catch {sqlite3_prepare $DB "ATTACH 'test2.db' AS t2" -1 TAIL} VM] if {$rc} {lappend rc $VM} sqlite3_step $VM sqlite3_finalize $VM set rc } {0} do_test attach2-3.2 { set rc [catch {sqlite3_prepare $DB "DETACH t2" -1 TAIL} VM] if {$rc} {lappend rc $VM} sqlite3_step $VM sqlite3_finalize $VM set rc } {0} db close for {set i 2} {$i<=15} {incr i} { catch {db$i close} } # A procedure to verify the status of locks on a database. # proc lock_status {testnum db expected_result} { # If the database was compiled with OMIT_TEMPDB set, then # the lock_status list will not contain an entry for the temp # db. But the test code doesn't know this, so its easiest # to filter it out of the $expected_result list here. ifcapable !tempdb { set expected_result [concat \ [lrange $expected_result 0 1] \ [lrange $expected_result 4 end] \ ] } do_test attach2-$testnum [subst { $db cache flush ;# The lock_status pragma should not be cached execsql {PRAGMA lock_status} $db }] $expected_result } set sqlite_os_trace 0 # Tests attach2-4.* test that read-locks work correctly with attached # databases. do_test attach2-4.1 { sqlite3 db test.db sqlite3 db2 test.db execsql {ATTACH 'test2.db' as file2} execsql {ATTACH 'test2.db' as file2} db2 } {} lock_status 4.1.1 db {main unlocked temp closed file2 unlocked} lock_status 4.1.2 db2 {main unlocked temp closed file2 unlocked} do_test attach2-4.2 { # Handle 'db' read-locks test.db execsql {BEGIN} execsql {SELECT * FROM t1} # Lock status: # db - shared(main) # db2 - } {} lock_status 4.2.1 db {main shared temp closed file2 unlocked} lock_status 4.2.2 db2 {main unlocked temp closed file2 unlocked} do_test attach2-4.3 { # The read lock held by db does not prevent db2 from reading test.db execsql {SELECT * FROM t1} db2 } {} lock_status 4.3.1 db {main shared temp closed file2 unlocked} lock_status 4.3.2 db2 {main unlocked temp closed file2 unlocked} do_test attach2-4.4 { # db is holding a read lock on test.db, so we should not be able # to commit a write to test.db from db2 catchsql { INSERT INTO t1 VALUES(1, 2) } db2 } {1 {database is locked}} lock_status 4.4.1 db {main shared temp closed file2 unlocked} lock_status 4.4.2 db2 {main unlocked temp closed file2 unlocked} # We have to make sure that the cache_size and the soft_heap_limit # are large enough to hold the entire change in memory. If either # is set too small, then changes will spill to the database, forcing # a reserved lock to promote to exclusive. That will mess up our # test results. set soft_limit [sqlite3_soft_heap_limit 0] do_test attach2-4.5 { # Handle 'db2' reserves file2. execsql {BEGIN} db2 execsql {INSERT INTO file2.t1 VALUES(1, 2)} db2 # Lock status: # db - shared(main) # db2 - reserved(file2) } {} lock_status 4.5.1 db {main shared temp closed file2 unlocked} lock_status 4.5.2 db2 {main unlocked temp closed file2 reserved} do_test attach2-4.6.1 { # Reads are allowed against a reserved database. catchsql { SELECT * FROM file2.t1; } # Lock status: # db - shared(main), shared(file2) # db2 - reserved(file2) } {0 {}} lock_status 4.6.1.1 db {main shared temp closed file2 shared} lock_status 4.6.1.2 db2 {main unlocked temp closed file2 reserved} do_test attach2-4.6.2 { # Writes against a reserved database are not allowed. catchsql { UPDATE file2.t1 SET a=0; } } {1 {database is locked}} lock_status 4.6.2.1 db {main shared temp closed file2 shared} lock_status 4.6.2.2 db2 {main unlocked temp closed file2 reserved} do_test attach2-4.7 { # Ensure handle 'db' retains the lock on the main file after # failing to obtain a write-lock on file2. catchsql { INSERT INTO t1 VALUES(1, 2) } db2 } {0 {}} lock_status 4.7.1 db {main shared temp closed file2 shared} lock_status 4.7.2 db2 {main reserved temp closed file2 reserved} do_test attach2-4.8 { # We should still be able to read test.db from db2 execsql {SELECT * FROM t1} db2 } {1 2} lock_status 4.8.1 db {main shared temp closed file2 shared} lock_status 4.8.2 db2 {main reserved temp closed file2 reserved} do_test attach2-4.9 { # Try to upgrade the handle 'db' lock. catchsql { INSERT INTO t1 VALUES(1, 2) } } {1 {database is locked}} lock_status 4.9.1 db {main shared temp closed file2 shared} lock_status 4.9.2 db2 {main reserved temp closed file2 reserved} do_test attach2-4.10 { # We cannot commit db2 while db is holding a read-lock catchsql {COMMIT} db2 } {1 {database is locked}} lock_status 4.10.1 db {main shared temp closed file2 shared} lock_status 4.10.2 db2 {main pending temp closed file2 reserved} set sqlite_os_trace 0 do_test attach2-4.11 { # db is able to commit. catchsql {COMMIT} } {0 {}} lock_status 4.11.1 db {main unlocked temp closed file2 unlocked} lock_status 4.11.2 db2 {main pending temp closed file2 reserved} do_test attach2-4.12 { # Now we can commit db2 catchsql {COMMIT} db2 } {0 {}} lock_status 4.12.1 db {main unlocked temp closed file2 unlocked} lock_status 4.12.2 db2 {main unlocked temp closed file2 unlocked} do_test attach2-4.13 { execsql {SELECT * FROM file2.t1} } {1 2} do_test attach2-4.14 { execsql {INSERT INTO t1 VALUES(1, 2)} } {} do_test attach2-4.15 { execsql {SELECT * FROM t1} db2 } {1 2 1 2} db close db2 close forcedelete test2.db sqlite3_soft_heap_limit $soft_limit # These tests - attach2-5.* - check that the master journal file is deleted # correctly when a multi-file transaction is committed or rolled back. # # Update: It's not actually created if a rollback occurs, so that test # doesn't really prove too much. foreach f [glob test.db*] {forcedelete $f} do_test attach2-5.1 { sqlite3 db test.db execsql { ATTACH 'test.db2' AS aux; } } {} do_test attach2-5.2 { execsql { BEGIN; CREATE TABLE tbl(a, b, c); CREATE TABLE aux.tbl(a, b, c); COMMIT; } } {} do_test attach2-5.3 { lsort [glob test.db*] } {test.db test.db2} do_test attach2-5.4 { execsql { BEGIN; DROP TABLE aux.tbl; DROP TABLE tbl; ROLLBACK; } } {} do_test attach2-5.5 { lsort [glob test.db*] } {test.db test.db2} # Check that a database cannot be ATTACHed or DETACHed during a transaction. do_test attach2-6.1 { execsql { BEGIN; } } {} do_test attach2-6.2 { catchsql { ATTACH 'test3.db' as aux2; } } {1 {cannot ATTACH database within transaction}} do_test attach2-6.3 { catchsql { DETACH aux; } } {1 {cannot DETACH database within transaction}} do_test attach2-6.4 { execsql { COMMIT; DETACH aux; } } {} db close finish_test