Return to insert4.test CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / sqlite3 / test

sqlite3

# 2007 January 24
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the INSERT transfer optimization.
#
# $Id: insert4.test,v 1.1.1.1 2012/02/21 17:04:16 misho Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

ifcapable !view||!subquery {
  finish_test
  return
}

# The sqlite3_xferopt_count variable is incremented whenever the 
# insert transfer optimization applies.
#
# This procedure runs a test to see if the sqlite3_xferopt_count is
# set to N.
#
proc xferopt_test {testname N} {
  do_test $testname {set ::sqlite3_xferopt_count} $N
}

# Create tables used for testing.
#
execsql {
  PRAGMA legacy_file_format = 0;
  CREATE TABLE t1(a int, b int, check(b>a));
  CREATE TABLE t2(x int, y int);
  CREATE VIEW v2 AS SELECT y, x FROM t2;
  CREATE TABLE t3(a int, b int);
}

# Ticket #2252.  Make sure the an INSERT from identical tables
# does not violate constraints.
#
do_test insert4-1.1 {
  set sqlite3_xferopt_count 0
  execsql {
    DELETE FROM t1;
    DELETE FROM t2;
    INSERT INTO t2 VALUES(9,1);
  }
  catchsql {
    INSERT INTO t1 SELECT * FROM t2;
  }
} {1 {constraint failed}}
xferopt_test insert4-1.2 0
do_test insert4-1.3 {
  execsql {
    SELECT * FROM t1;
  }
} {}

# Tests to make sure that the transfer optimization is not occurring
# when it is not a valid optimization.
#
# The SELECT must be against a real table.
do_test insert4-2.1.1 {
  execsql {
    DELETE FROM t1;
    INSERT INTO t1 SELECT 4, 8;
    SELECT * FROM t1;
  }
} {4 8}
xferopt_test insert4-2.1.2  0
do_test insert4-2.2.1 {
  catchsql {
    DELETE FROM t1;
    INSERT INTO t1 SELECT * FROM v2;
    SELECT * FROM t1;
  }
} {0 {1 9}}
xferopt_test insert4-2.2.2 0

# Do not run the transfer optimization if there is a LIMIT clause
#
do_test insert4-2.3.1 {
  execsql {
    DELETE FROM t2;
    INSERT INTO t2 VALUES(9,1);
    INSERT INTO t2 SELECT y, x FROM t2;
    INSERT INTO t3 SELECT * FROM t2 LIMIT 1;
    SELECT * FROM t3;
  }
} {9 1}
xferopt_test insert4-2.3.2  0
do_test insert4-2.3.3 {
  catchsql {
    DELETE FROM t1;
    INSERT INTO t1 SELECT * FROM t2 LIMIT 1;
    SELECT * FROM t1;
  }
} {1 {constraint failed}}
xferopt_test insert4-2.3.4 0

# Do not run the transfer optimization if there is a DISTINCT
#
do_test insert4-2.4.1 {
  execsql {
    DELETE FROM t3;
    INSERT INTO t3 SELECT DISTINCT * FROM t2;
    SELECT * FROM t3;
  }
} {9 1 1 9}
xferopt_test insert4-2.4.2 0
do_test insert4-2.4.3 {
  catchsql {
    DELETE FROM t1;
    INSERT INTO t1 SELECT DISTINCT * FROM t2;
  }
} {1 {constraint failed}}
xferopt_test insert4-2.4.4 0

# The following procedure constructs two tables then tries to transfer
# data from one table to the other.  Checks are made to make sure the
# transfer is successful and that the transfer optimization was used or
# not, as appropriate.
#
#     xfer_check TESTID  XFER-USED   INIT-DATA   DEST-SCHEMA   SRC-SCHEMA 
#
# The TESTID argument is the symbolic name for this test.  The XFER-USED
# argument is true if the transfer optimization should be employed and
# false if not.  INIT-DATA is a single row of data that is to be 
# transfered.  DEST-SCHEMA and SRC-SCHEMA are table declarations for
# the destination and source tables.
#
proc xfer_check {testid xferused initdata destschema srcschema} {
  execsql "CREATE TABLE dest($destschema)"
  execsql "CREATE TABLE src($srcschema)"
  execsql "INSERT INTO src VALUES([join $initdata ,])"
  set ::sqlite3_xferopt_count 0
  do_test $testid.1 {
    execsql {
      INSERT INTO dest SELECT * FROM src;
      SELECT * FROM dest;
    }
  } $initdata
  do_test $testid.2 {
    set ::sqlite3_xferopt_count
  } $xferused
  execsql {
    DROP TABLE dest;
    DROP TABLE src;
  }
}


# Do run the transfer optimization if tables have identical
# CHECK constraints.
#
xfer_check insert4-3.1 1 {1 9} \
    {a int, b int CHECK(b>a)} \
    {x int, y int CHECK(y>x)}
xfer_check insert4-3.2 1 {1 9} \
    {a int, b int CHECK(b>a)} \
    {x int CHECK(y>x), y int}

# Do run the transfer optimization if the destination table lacks
# any CHECK constraints regardless of whether or not there are CHECK
# constraints on the source table.
#
xfer_check insert4-3.3 1 {1 9} \
    {a int, b int} \
    {x int, y int CHECK(y>x)}

# Do run the transfer optimization if the destination table omits
# NOT NULL constraints that the source table has.
#
xfer_check insert4-3.4 0 {1 9} \
    {a int, b int CHECK(b>a)} \
    {x int, y int}

# Do not run the optimization if the destination has NOT NULL
# constraints that the source table lacks.
#
xfer_check insert4-3.5 0 {1 9} \
    {a int, b int NOT NULL} \
    {x int, y int}
xfer_check insert4-3.6 0 {1 9} \
    {a int, b int NOT NULL} \
    {x int NOT NULL, y int}
xfer_check insert4-3.7 0 {1 9} \
    {a int NOT NULL, b int NOT NULL} \
    {x int NOT NULL, y int}
xfer_check insert4-3.8 0 {1 9} \
    {a int NOT NULL, b int} \
    {x int, y int}


# Do run the transfer optimization if the destination table and
# source table have the same NOT NULL constraints or if the 
# source table has extra NOT NULL constraints.
#
xfer_check insert4-3.9 1 {1 9} \
    {a int, b int} \
    {x int NOT NULL, y int}
xfer_check insert4-3.10 1 {1 9} \
    {a int, b int} \
    {x int NOT NULL, y int NOT NULL}
xfer_check insert4-3.11 1 {1 9} \
    {a int NOT NULL, b int} \
    {x int NOT NULL, y int NOT NULL}
xfer_check insert4-3.12 1 {1 9} \
    {a int, b int NOT NULL} \
    {x int NOT NULL, y int NOT NULL}

# Do not run the optimization if any corresponding table
# columns have different affinities.
#
xfer_check insert4-3.20 0 {1 9} \
    {a text, b int} \
    {x int, b int}
xfer_check insert4-3.21 0 {1 9} \
    {a int, b int} \
    {x text, b int}

# "int" and "integer" are equivalent so the optimization should
# run here.
#
xfer_check insert4-3.22 1 {1 9} \
    {a int, b int} \
    {x integer, b int}

# Ticket #2291.
#

do_test insert4-4.1a {
  execsql {CREATE TABLE t4(a, b, UNIQUE(a,b))}
} {}
ifcapable vacuum {
  do_test insert4-4.1b {
    execsql {
      INSERT INTO t4 VALUES(NULL,0);
      INSERT INTO t4 VALUES(NULL,1);
      INSERT INTO t4 VALUES(NULL,1);
      VACUUM;   
    }
  } {}
}

# Check some error conditions:
#
do_test insert4-5.1 {
  # Table does not exist.
  catchsql { INSERT INTO t2 SELECT * FROM nosuchtable }
} {1 {no such table: nosuchtable}}
do_test insert4-5.2 {
  # Number of columns does not match.
  catchsql { 
    CREATE TABLE t5(a, b, c);
    INSERT INTO t4 SELECT * FROM t5;
  }
} {1 {table t4 has 2 columns but 3 values were supplied}}

do_test insert4-6.1 {
  set ::sqlite3_xferopt_count 0
  execsql {
    CREATE INDEX t2_i2 ON t2(x, y COLLATE nocase); 
    CREATE INDEX t2_i1 ON t2(x ASC, y DESC);
    CREATE INDEX t3_i1 ON t3(a, b);
    INSERT INTO t2 SELECT * FROM t3;
  }
  set ::sqlite3_xferopt_count
} {0}
do_test insert4-6.2 {
  set ::sqlite3_xferopt_count 0
  execsql {
    DROP INDEX t2_i2;
    INSERT INTO t2 SELECT * FROM t3;
  }
  set ::sqlite3_xferopt_count
} {0}
do_test insert4-6.3 {
  set ::sqlite3_xferopt_count 0
  execsql {
    DROP INDEX t2_i1;
    CREATE INDEX t2_i1 ON t2(x ASC, y ASC);
    INSERT INTO t2 SELECT * FROM t3;
  }
  set ::sqlite3_xferopt_count
} {1}
do_test insert4-6.4 {
  set ::sqlite3_xferopt_count 0
  execsql {
    DROP INDEX t2_i1;
    CREATE INDEX t2_i1 ON t2(x ASC, y COLLATE RTRIM);
    INSERT INTO t2 SELECT * FROM t3;
  }
  set ::sqlite3_xferopt_count
} {0}


do_test insert4-6.5 {
  execsql {
    CREATE TABLE t6a(x CHECK( x<>'abc' ));
    INSERT INTO t6a VALUES('ABC');
    SELECT * FROM t6a;
  }
} {ABC}
do_test insert4-6.6 {
  execsql {
    CREATE TABLE t6b(x CHECK( x<>'abc' COLLATE nocase ));
  }
  catchsql {
    INSERT INTO t6b SELECT * FROM t6a;
  }
} {1 {constraint failed}}
do_test insert4-6.7 {
  execsql {
    DROP TABLE t6b;
    CREATE TABLE t6b(x CHECK( x COLLATE nocase <>'abc' ));
  }
  catchsql {
    INSERT INTO t6b SELECT * FROM t6a;
  }
} {1 {constraint failed}}

# Ticket [6284df89debdfa61db8073e062908af0c9b6118e]
# Disable the xfer optimization if the destination table contains
# a foreign key constraint
#
ifcapable foreignkey {
  do_test insert4-7.1 {
    set ::sqlite3_xferopt_count 0
    execsql {
      CREATE TABLE t7a(x INTEGER PRIMARY KEY); INSERT INTO t7a VALUES(123);
      CREATE TABLE t7b(y INTEGER REFERENCES t7a);
      CREATE TABLE t7c(z INT);  INSERT INTO t7c VALUES(234);
      INSERT INTO t7b SELECT * FROM t7c;
      SELECT * FROM t7b;
    }
  } {234}
  do_test insert4-7.2 {
    set ::sqlite3_xferopt_count
  } {1}
  do_test insert4-7.3 {
    set ::sqlite3_xferopt_count 0
    execsql {
      DELETE FROM t7b;
      PRAGMA foreign_keys=ON;
    }
    catchsql {
      INSERT INTO t7b SELECT * FROM t7c;
    }
  } {1 {foreign key constraint failed}}
  do_test insert4-7.4 {
    execsql {SELECT * FROM t7b}
  } {}
  do_test insert4-7.5 {
    set ::sqlite3_xferopt_count
  } {0}
  do_test insert4-7.6 {
    set ::sqlite3_xferopt_count 0
    execsql {
      DELETE FROM t7b; DELETE FROM t7c;
      INSERT INTO t7c VALUES(123);
      INSERT INTO t7b SELECT * FROM t7c;
      SELECT * FROM t7b;
    }
  } {123}
  do_test insert4-7.7 {
    set ::sqlite3_xferopt_count
  } {0}
  do_test insert4-7.7 {
    set ::sqlite3_xferopt_count 0
    execsql {
      PRAGMA foreign_keys=OFF;
      DELETE FROM t7b;
      INSERT INTO t7b SELECT * FROM t7c;
      SELECT * FROM t7b;
    }
  } {123}
  do_test insert4-7.8 {
    set ::sqlite3_xferopt_count
  } {1}
}

# Ticket [676bc02b87176125635cb174d110b431581912bb]
# Make sure INTEGER PRIMARY KEY ON CONFLICT ... works with the xfer
# optimization.
#
do_test insert4-8.1 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT REPLACE, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT REPLACE, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}
do_test insert4-8.2 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT REPLACE, b);
    CREATE TABLE t2(x, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}
do_test insert4-8.3 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT IGNORE, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT IGNORE, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 2}
do_test insert4-8.4 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT IGNORE, b);
    CREATE TABLE t2(x, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 2}
do_test insert4-8.5 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT FAIL, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT FAIL, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(-99,100);
    INSERT INTO t2 VALUES(1,3);
    SELECT * FROM t1;
  }
  catchsql {
    INSERT INTO t1 SELECT * FROM t2;
  }
} {1 {PRIMARY KEY must be unique}}
do_test insert4-8.6 {
  execsql {
    SELECT * FROM t1;
  }
} {-99 100 1 2} 
do_test insert4-8.7 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT ABORT, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT ABORT, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(-99,100);
    INSERT INTO t2 VALUES(1,3);
    SELECT * FROM t1;
  }
  catchsql {
    INSERT INTO t1 SELECT * FROM t2;
  }
} {1 {PRIMARY KEY must be unique}}
do_test insert4-8.8 {
  execsql {
    SELECT * FROM t1;
  }
} {1 2} 
do_test insert4-8.9 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT ROLLBACK, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT ROLLBACK, y);
    INSERT INTO t1 VALUES(1,2);
    INSERT INTO t2 VALUES(-99,100);
    INSERT INTO t2 VALUES(1,3);
    SELECT * FROM t1;
  }
  catchsql {
    BEGIN;
    INSERT INTO t1 VALUES(2,3);
    INSERT INTO t1 SELECT * FROM t2;
  }
} {1 {PRIMARY KEY must be unique}}
do_test insert4-8.10 {
  catchsql {COMMIT}
} {1 {cannot commit - no transaction is active}}
do_test insert4-8.11 {
  execsql {
    SELECT * FROM t1;
  }
} {1 2} 

do_test insert4-8.21 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT REPLACE, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT REPLACE, y);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}
do_test insert4-8.22 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT IGNORE, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT IGNORE, y);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}
do_test insert4-8.23 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT ABORT, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT ABORT, y);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}
do_test insert4-8.24 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT FAIL, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT FAIL, y);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}
do_test insert4-8.25 {
  execsql {
    DROP TABLE IF EXISTS t1;
    DROP TABLE IF EXISTS t2;
    CREATE TABLE t1(a INTEGER PRIMARY KEY ON CONFLICT ROLLBACK, b);
    CREATE TABLE t2(x INTEGER PRIMARY KEY ON CONFLICT ROLLBACK, y);
    INSERT INTO t2 VALUES(1,3);
    INSERT INTO t1 SELECT * FROM t2;
    SELECT * FROM t1;
  }
} {1 3}


finish_test