Annotation of embedaddon/strongswan/conf/plugins/load-tester.opt, revision 1.1.1.2
1.1 misho 1: charon.plugins.load-tester {}
2: Section to configure the load-tester plugin, see LOAD TESTS in
3: **strongswan.conf**(5) for details.
4:
5: charon.plugins.load-tester.addrs {}
6: Section that contains key/value pairs with address pools (in CIDR notation)
7: to use for a specific network interface e.g. eth0 = 10.10.0.0/16.
8:
9: charon.plugins.load-tester.addrs_keep = no
10: Whether to keep dynamic addresses even after the associated SA got
11: terminated.
12:
13: charon.plugins.load-tester.addrs_prefix = 16
14: Network prefix length to use when installing dynamic addresses.
15: If set to -1 the full address is used (i.e. 32 or 128).
16:
17: charon.plugins.load-tester.ca_dir =
18: Directory to load (intermediate) CA certificates from.
19:
20: charon.plugins.load-tester.child_rekey = 600
21: Seconds to start CHILD_SA rekeying after setup.
22:
23: charon.plugins.load-tester.crl
24: URI to a CRL to include as certificate distribution point in generated
25: certificates.
26:
27: charon.plugins.load-tester.delay = 0
28: Delay between initiations for each thread.
29:
30: charon.plugins.load-tester.delete_after_established = no
31: Delete an IKE_SA as soon as it has been established.
32:
33: charon.plugins.load-tester.digest = sha1
34: Digest algorithm used when issuing certificates.
35:
36: charon.plugins.load-tester.dpd_delay = 0
37: DPD delay to use in load test.
38:
39: charon.plugins.load-tester.dynamic_port = 0
40: Base port to be used for requests (each client uses a different port).
41:
42: charon.plugins.load-tester.eap_password = default-pwd
43: EAP secret to use in load test.
44:
45: charon.plugins.load-tester.enable = no
46: Enable the load testing plugin. **WARNING**: Never enable this plugin on
47: productive systems. It provides preconfigured credentials and allows an
48: attacker to authenticate as any user.
49:
50: charon.plugins.load-tester.esp = aes128-sha1
51: CHILD_SA proposal to use for load tests.
52:
53: charon.plugins.load-tester.fake_kernel = no
54: Fake the kernel interface to allow load-testing against self.
55:
56: charon.plugins.load-tester.ike_rekey = 0
57: Seconds to start IKE_SA rekeying after setup.
58:
59: charon.plugins.load-tester.init_limit = 0
60: Global limit of concurrently established SAs during load test.
61:
62: charon.plugins.load-tester.initiator = 0.0.0.0
63: Address to initiate from.
64:
65: charon.plugins.load-tester.initiators = 0
66: Number of concurrent initiator threads to use in load test.
67:
68: charon.plugins.load-tester.initiator_auth = pubkey
69: Authentication method(s) the initiator uses.
70:
71: charon.plugins.load-tester.initiator_id =
72: Initiator ID used in load test.
73:
74: charon.plugins.load-tester.initiator_match =
75: Initiator ID to match against as responder.
76:
77: charon.plugins.load-tester.initiator_tsi =
78: Traffic selector on initiator side, as proposed by initiator.
79:
80: charon.plugins.load-tester.initiator_tsr =
81: Traffic selector on responder side, as proposed by initiator.
82:
83: charon.plugins.load-tester.iterations = 1
84: Number of IKE_SAs to initiate by each initiator in load test.
85:
86: charon.plugins.load-tester.issuer_cert =
87: Path to the issuer certificate (if not configured a hard-coded default value
88: is used).
89:
90: charon.plugins.load-tester.issuer_key =
91: Path to private key that is used to issue certificates (if not configured a
92: hard-coded default value is used).
93:
94: charon.plugins.load-tester.mode = tunnel
95: IPsec mode to use, one of _tunnel_, _transport_, or _beet_.
96:
97: charon.plugins.load-tester.pool =
98: Provide INTERNAL_IPV4_ADDRs from a named pool.
99:
100: charon.plugins.load-tester.preshared_key = <default-psk>
101: Preshared key to use in load test.
102:
103: charon.plugins.load-tester.proposal = aes128-sha1-modp768
104: IKE proposal to use in load test.
105:
106: charon.plugins.load-tester.responder = 127.0.0.1
107: Address to initiation connections to.
108:
109: charon.plugins.load-tester.responder_auth = pubkey
110: Authentication method(s) the responder uses.
111:
112: charon.plugins.load-tester.responder_id =
113: Responder ID used in load test.
114:
115: charon.plugins.load-tester.responder_tsi = initiator_tsi
116: Traffic selector on initiator side, as narrowed by responder.
117:
118: charon.plugins.load-tester.responder_tsr = initiator_tsr
119: Traffic selector on responder side, as narrowed by responder.
120:
121: charon.plugins.load-tester.request_virtual_ip = no
1.1.1.2 ! misho 122: Request an INTERNAL_IPV4_ADDR and INTERNAL_IPV6_ADDR from the server.
1.1 misho 123:
124: charon.plugins.load-tester.shutdown_when_complete = no
125: Shutdown the daemon after all IKE_SAs have been established.
126:
127: charon.plugins.load-tester.socket = unix://${piddir}/charon.ldt
128: Socket provided by the load-tester plugin.
129:
130: charon.plugins.load-tester.version = 0
131: IKE version to use (0 means use IKEv2 as initiator and accept any version as
132: responder).
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to load-tester.opt CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / strongswan / conf / plugins