Annotation of embedaddon/strongswan/src/pki/Makefile.in, revision 1.1

1.1     ! misho       1: # Makefile.in generated by automake 1.15.1 from Makefile.am.
        !             2: # @configure_input@
        !             3: 
        !             4: # Copyright (C) 1994-2017 Free Software Foundation, Inc.
        !             5: 
        !             6: # This Makefile.in is free software; the Free Software Foundation
        !             7: # gives unlimited permission to copy and/or distribute it,
        !             8: # with or without modifications, as long as this notice is preserved.
        !             9: 
        !            10: # This program is distributed in the hope that it will be useful,
        !            11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
        !            12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
        !            13: # PARTICULAR PURPOSE.
        !            14: 
        !            15: @SET_MAKE@
        !            16: 
        !            17: VPATH = @srcdir@
        !            18: am__is_gnu_make = { \
        !            19:   if test -z '$(MAKELEVEL)'; then \
        !            20:     false; \
        !            21:   elif test -n '$(MAKE_HOST)'; then \
        !            22:     true; \
        !            23:   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
        !            24:     true; \
        !            25:   else \
        !            26:     false; \
        !            27:   fi; \
        !            28: }
        !            29: am__make_running_with_option = \
        !            30:   case $${target_option-} in \
        !            31:       ?) ;; \
        !            32:       *) echo "am__make_running_with_option: internal error: invalid" \
        !            33:               "target option '$${target_option-}' specified" >&2; \
        !            34:          exit 1;; \
        !            35:   esac; \
        !            36:   has_opt=no; \
        !            37:   sane_makeflags=$$MAKEFLAGS; \
        !            38:   if $(am__is_gnu_make); then \
        !            39:     sane_makeflags=$$MFLAGS; \
        !            40:   else \
        !            41:     case $$MAKEFLAGS in \
        !            42:       *\\[\ \  ]*) \
        !            43:         bs=\\; \
        !            44:         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
        !            45:           | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
        !            46:     esac; \
        !            47:   fi; \
        !            48:   skip_next=no; \
        !            49:   strip_trailopt () \
        !            50:   { \
        !            51:     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
        !            52:   }; \
        !            53:   for flg in $$sane_makeflags; do \
        !            54:     test $$skip_next = yes && { skip_next=no; continue; }; \
        !            55:     case $$flg in \
        !            56:       *=*|--*) continue;; \
        !            57:         -*I) strip_trailopt 'I'; skip_next=yes;; \
        !            58:       -*I?*) strip_trailopt 'I';; \
        !            59:         -*O) strip_trailopt 'O'; skip_next=yes;; \
        !            60:       -*O?*) strip_trailopt 'O';; \
        !            61:         -*l) strip_trailopt 'l'; skip_next=yes;; \
        !            62:       -*l?*) strip_trailopt 'l';; \
        !            63:       -[dEDm]) skip_next=yes;; \
        !            64:       -[JT]) skip_next=yes;; \
        !            65:     esac; \
        !            66:     case $$flg in \
        !            67:       *$$target_option*) has_opt=yes; break;; \
        !            68:     esac; \
        !            69:   done; \
        !            70:   test $$has_opt = yes
        !            71: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
        !            72: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
        !            73: pkgdatadir = $(datadir)/@PACKAGE@
        !            74: pkgincludedir = $(includedir)/@PACKAGE@
        !            75: pkglibdir = $(libdir)/@PACKAGE@
        !            76: pkglibexecdir = $(libexecdir)/@PACKAGE@
        !            77: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
        !            78: install_sh_DATA = $(install_sh) -c -m 644
        !            79: install_sh_PROGRAM = $(install_sh) -c
        !            80: install_sh_SCRIPT = $(install_sh) -c
        !            81: INSTALL_HEADER = $(INSTALL_DATA)
        !            82: transform = $(program_transform_name)
        !            83: NORMAL_INSTALL = :
        !            84: PRE_INSTALL = :
        !            85: POST_INSTALL = :
        !            86: NORMAL_UNINSTALL = :
        !            87: PRE_UNINSTALL = :
        !            88: POST_UNINSTALL = :
        !            89: build_triplet = @build@
        !            90: host_triplet = @host@
        !            91: bin_PROGRAMS = pki$(EXEEXT)
        !            92: subdir = src/pki
        !            93: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
        !            94: am__aclocal_m4_deps = $(top_srcdir)/m4/config/libtool.m4 \
        !            95:        $(top_srcdir)/m4/config/ltoptions.m4 \
        !            96:        $(top_srcdir)/m4/config/ltsugar.m4 \
        !            97:        $(top_srcdir)/m4/config/ltversion.m4 \
        !            98:        $(top_srcdir)/m4/config/lt~obsolete.m4 \
        !            99:        $(top_srcdir)/m4/macros/split-package-version.m4 \
        !           100:        $(top_srcdir)/m4/macros/with.m4 \
        !           101:        $(top_srcdir)/m4/macros/enable-disable.m4 \
        !           102:        $(top_srcdir)/m4/macros/add-plugin.m4 \
        !           103:        $(top_srcdir)/configure.ac
        !           104: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        !           105:        $(ACLOCAL_M4)
        !           106: DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
        !           107: mkinstalldirs = $(install_sh) -d
        !           108: CONFIG_HEADER = $(top_builddir)/config.h
        !           109: CONFIG_CLEAN_FILES =
        !           110: CONFIG_CLEAN_VPATH_FILES =
        !           111: am__installdirs = "$(DESTDIR)$(bindir)"
        !           112: PROGRAMS = $(bin_PROGRAMS)
        !           113: am__dirstamp = $(am__leading_dot)dirstamp
        !           114: am_pki_OBJECTS = pki.$(OBJEXT) command.$(OBJEXT) \
        !           115:        commands/acert.$(OBJEXT) commands/dn.$(OBJEXT) \
        !           116:        commands/gen.$(OBJEXT) commands/issue.$(OBJEXT) \
        !           117:        commands/keyid.$(OBJEXT) commands/pkcs12.$(OBJEXT) \
        !           118:        commands/pkcs7.$(OBJEXT) commands/print.$(OBJEXT) \
        !           119:        commands/pub.$(OBJEXT) commands/req.$(OBJEXT) \
        !           120:        commands/self.$(OBJEXT) commands/signcrl.$(OBJEXT) \
        !           121:        commands/verify.$(OBJEXT)
        !           122: pki_OBJECTS = $(am_pki_OBJECTS)
        !           123: am__DEPENDENCIES_1 =
        !           124: pki_DEPENDENCIES = $(top_builddir)/src/libstrongswan/libstrongswan.la \
        !           125:        $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
        !           126:        $(am__DEPENDENCIES_1)
        !           127: AM_V_lt = $(am__v_lt_@AM_V@)
        !           128: am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
        !           129: am__v_lt_0 = --silent
        !           130: am__v_lt_1 = 
        !           131: AM_V_P = $(am__v_P_@AM_V@)
        !           132: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
        !           133: am__v_P_0 = false
        !           134: am__v_P_1 = :
        !           135: AM_V_GEN = $(am__v_GEN_@AM_V@)
        !           136: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
        !           137: am__v_GEN_0 = @echo "  GEN     " $@;
        !           138: am__v_GEN_1 = 
        !           139: AM_V_at = $(am__v_at_@AM_V@)
        !           140: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
        !           141: am__v_at_0 = @
        !           142: am__v_at_1 = 
        !           143: DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
        !           144: depcomp = $(SHELL) $(top_srcdir)/depcomp
        !           145: am__depfiles_maybe = depfiles
        !           146: am__mv = mv -f
        !           147: COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
        !           148:        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
        !           149: LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
        !           150:        $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
        !           151:        $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
        !           152:        $(AM_CFLAGS) $(CFLAGS)
        !           153: AM_V_CC = $(am__v_CC_@AM_V@)
        !           154: am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
        !           155: am__v_CC_0 = @echo "  CC      " $@;
        !           156: am__v_CC_1 = 
        !           157: CCLD = $(CC)
        !           158: LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
        !           159:        $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
        !           160:        $(AM_LDFLAGS) $(LDFLAGS) -o $@
        !           161: AM_V_CCLD = $(am__v_CCLD_@AM_V@)
        !           162: am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
        !           163: am__v_CCLD_0 = @echo "  CCLD    " $@;
        !           164: am__v_CCLD_1 = 
        !           165: SOURCES = $(pki_SOURCES)
        !           166: DIST_SOURCES = $(pki_SOURCES)
        !           167: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
        !           168:        ctags-recursive dvi-recursive html-recursive info-recursive \
        !           169:        install-data-recursive install-dvi-recursive \
        !           170:        install-exec-recursive install-html-recursive \
        !           171:        install-info-recursive install-pdf-recursive \
        !           172:        install-ps-recursive install-recursive installcheck-recursive \
        !           173:        installdirs-recursive pdf-recursive ps-recursive \
        !           174:        tags-recursive uninstall-recursive
        !           175: am__can_run_installinfo = \
        !           176:   case $$AM_UPDATE_INFO_DIR in \
        !           177:     n|no|NO) false;; \
        !           178:     *) (install-info --version) >/dev/null 2>&1;; \
        !           179:   esac
        !           180: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
        !           181:   distclean-recursive maintainer-clean-recursive
        !           182: am__recursive_targets = \
        !           183:   $(RECURSIVE_TARGETS) \
        !           184:   $(RECURSIVE_CLEAN_TARGETS) \
        !           185:   $(am__extra_recursive_targets)
        !           186: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
        !           187:        distdir
        !           188: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
        !           189: # Read a list of newline-separated strings from the standard input,
        !           190: # and print each of them once, without duplicates.  Input order is
        !           191: # *not* preserved.
        !           192: am__uniquify_input = $(AWK) '\
        !           193:   BEGIN { nonempty = 0; } \
        !           194:   { items[$$0] = 1; nonempty = 1; } \
        !           195:   END { if (nonempty) { for (i in items) print i; }; } \
        !           196: '
        !           197: # Make sure the list of sources is unique.  This is necessary because,
        !           198: # e.g., the same source file might be shared among _SOURCES variables
        !           199: # for different programs/libraries.
        !           200: am__define_uniq_tagged_files = \
        !           201:   list='$(am__tagged_files)'; \
        !           202:   unique=`for i in $$list; do \
        !           203:     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
        !           204:   done | $(am__uniquify_input)`
        !           205: ETAGS = etags
        !           206: CTAGS = ctags
        !           207: DIST_SUBDIRS = $(SUBDIRS)
        !           208: am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
        !           209: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
        !           210: am__relativize = \
        !           211:   dir0=`pwd`; \
        !           212:   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
        !           213:   sed_rest='s,^[^/]*/*,,'; \
        !           214:   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
        !           215:   sed_butlast='s,/*[^/]*$$,,'; \
        !           216:   while test -n "$$dir1"; do \
        !           217:     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
        !           218:     if test "$$first" != "."; then \
        !           219:       if test "$$first" = ".."; then \
        !           220:         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        !           221:         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
        !           222:       else \
        !           223:         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        !           224:         if test "$$first2" = "$$first"; then \
        !           225:           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        !           226:         else \
        !           227:           dir2="../$$dir2"; \
        !           228:         fi; \
        !           229:         dir0="$$dir0"/"$$first"; \
        !           230:       fi; \
        !           231:     fi; \
        !           232:     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
        !           233:   done; \
        !           234:   reldir="$$dir2"
        !           235: ACLOCAL = @ACLOCAL@
        !           236: ALLOCA = @ALLOCA@
        !           237: AMTAR = @AMTAR@
        !           238: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
        !           239: AR = @AR@
        !           240: ATOMICLIB = @ATOMICLIB@
        !           241: AUTOCONF = @AUTOCONF@
        !           242: AUTOHEADER = @AUTOHEADER@
        !           243: AUTOMAKE = @AUTOMAKE@
        !           244: AWK = @AWK@
        !           245: BFDLIB = @BFDLIB@
        !           246: BTLIB = @BTLIB@
        !           247: CC = @CC@
        !           248: CCDEPMODE = @CCDEPMODE@
        !           249: CFLAGS = @CFLAGS@
        !           250: COVERAGE_CFLAGS = @COVERAGE_CFLAGS@
        !           251: COVERAGE_LDFLAGS = @COVERAGE_LDFLAGS@
        !           252: CPP = @CPP@
        !           253: CPPFLAGS = @CPPFLAGS@
        !           254: CYGPATH_W = @CYGPATH_W@
        !           255: DEFS = @DEFS@
        !           256: DEPDIR = @DEPDIR@
        !           257: DLLIB = @DLLIB@
        !           258: DLLTOOL = @DLLTOOL@
        !           259: DSYMUTIL = @DSYMUTIL@
        !           260: DUMPBIN = @DUMPBIN@
        !           261: EASY_INSTALL = @EASY_INSTALL@
        !           262: ECHO_C = @ECHO_C@
        !           263: ECHO_N = @ECHO_N@
        !           264: ECHO_T = @ECHO_T@
        !           265: EGREP = @EGREP@
        !           266: EXEEXT = @EXEEXT@
        !           267: FGREP = @FGREP@
        !           268: FUZZING_CFLAGS = @FUZZING_CFLAGS@
        !           269: FUZZING_LDFLAGS = @FUZZING_LDFLAGS@
        !           270: GEM = @GEM@
        !           271: GENHTML = @GENHTML@
        !           272: GPERF = @GPERF@
        !           273: GPERF_LEN_TYPE = @GPERF_LEN_TYPE@
        !           274: GPRBUILD = @GPRBUILD@
        !           275: GREP = @GREP@
        !           276: INSTALL = @INSTALL@
        !           277: INSTALL_DATA = @INSTALL_DATA@
        !           278: INSTALL_PROGRAM = @INSTALL_PROGRAM@
        !           279: INSTALL_SCRIPT = @INSTALL_SCRIPT@
        !           280: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
        !           281: LCOV = @LCOV@
        !           282: LD = @LD@
        !           283: LDFLAGS = @LDFLAGS@
        !           284: LEX = @LEX@
        !           285: LEXLIB = @LEXLIB@
        !           286: LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
        !           287: LIBOBJS = @LIBOBJS@
        !           288: LIBS = @LIBS@
        !           289: LIBTOOL = @LIBTOOL@
        !           290: LIPO = @LIPO@
        !           291: LN_S = @LN_S@
        !           292: LTLIBOBJS = @LTLIBOBJS@
        !           293: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
        !           294: MAKEINFO = @MAKEINFO@
        !           295: MANIFEST_TOOL = @MANIFEST_TOOL@
        !           296: MKDIR_P = @MKDIR_P@
        !           297: MYSQLCFLAG = @MYSQLCFLAG@
        !           298: MYSQLCONFIG = @MYSQLCONFIG@
        !           299: MYSQLLIB = @MYSQLLIB@
        !           300: NM = @NM@
        !           301: NMEDIT = @NMEDIT@
        !           302: OBJDUMP = @OBJDUMP@
        !           303: OBJEXT = @OBJEXT@
        !           304: OPENSSL_LIB = @OPENSSL_LIB@
        !           305: OTOOL = @OTOOL@
        !           306: OTOOL64 = @OTOOL64@
        !           307: PACKAGE = @PACKAGE@
        !           308: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
        !           309: PACKAGE_NAME = @PACKAGE_NAME@
        !           310: PACKAGE_STRING = @PACKAGE_STRING@
        !           311: PACKAGE_TARNAME = @PACKAGE_TARNAME@
        !           312: PACKAGE_URL = @PACKAGE_URL@
        !           313: PACKAGE_VERSION = @PACKAGE_VERSION@
        !           314: PACKAGE_VERSION_BUILD = @PACKAGE_VERSION_BUILD@
        !           315: PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
        !           316: PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
        !           317: PACKAGE_VERSION_REVIEW = @PACKAGE_VERSION_REVIEW@
        !           318: PATH_SEPARATOR = @PATH_SEPARATOR@
        !           319: PERL = @PERL@
        !           320: PKG_CONFIG = @PKG_CONFIG@
        !           321: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
        !           322: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
        !           323: PLUGIN_CFLAGS = @PLUGIN_CFLAGS@
        !           324: PTHREADLIB = @PTHREADLIB@
        !           325: PYTHON = @PYTHON@
        !           326: PYTHONEGGINSTALLDIR = @PYTHONEGGINSTALLDIR@
        !           327: PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
        !           328: PYTHON_PACKAGE_VERSION = @PYTHON_PACKAGE_VERSION@
        !           329: PYTHON_PLATFORM = @PYTHON_PLATFORM@
        !           330: PYTHON_PREFIX = @PYTHON_PREFIX@
        !           331: PYTHON_VERSION = @PYTHON_VERSION@
        !           332: PY_TEST = @PY_TEST@
        !           333: RANLIB = @RANLIB@
        !           334: RTLIB = @RTLIB@
        !           335: RUBYGEMDIR = @RUBYGEMDIR@
        !           336: SED = @SED@
        !           337: SET_MAKE = @SET_MAKE@
        !           338: SHELL = @SHELL@
        !           339: SOCKLIB = @SOCKLIB@
        !           340: STRIP = @STRIP@
        !           341: TOX = @TOX@
        !           342: UNWINDLIB = @UNWINDLIB@
        !           343: VERSION = @VERSION@
        !           344: YACC = @YACC@
        !           345: YFLAGS = @YFLAGS@
        !           346: abs_builddir = @abs_builddir@
        !           347: abs_srcdir = @abs_srcdir@
        !           348: abs_top_builddir = @abs_top_builddir@
        !           349: abs_top_srcdir = @abs_top_srcdir@
        !           350: ac_ct_AR = @ac_ct_AR@
        !           351: ac_ct_CC = @ac_ct_CC@
        !           352: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
        !           353: aikgen_plugins = @aikgen_plugins@
        !           354: am__include = @am__include@
        !           355: am__leading_dot = @am__leading_dot@
        !           356: am__quote = @am__quote@
        !           357: am__tar = @am__tar@
        !           358: am__untar = @am__untar@
        !           359: attest_plugins = @attest_plugins@
        !           360: bindir = @bindir@
        !           361: botan_CFLAGS = @botan_CFLAGS@
        !           362: botan_LIBS = @botan_LIBS@
        !           363: build = @build@
        !           364: build_alias = @build_alias@
        !           365: build_cpu = @build_cpu@
        !           366: build_os = @build_os@
        !           367: build_vendor = @build_vendor@
        !           368: builddir = @builddir@
        !           369: c_plugins = @c_plugins@
        !           370: charon_natt_port = @charon_natt_port@
        !           371: charon_plugins = @charon_plugins@
        !           372: charon_udp_port = @charon_udp_port@
        !           373: clearsilver_LIBS = @clearsilver_LIBS@
        !           374: cmd_plugins = @cmd_plugins@
        !           375: datadir = @datadir@
        !           376: datarootdir = @datarootdir@
        !           377: dbusdatadir = @dbusdatadir@
        !           378: dbuspolicydir = @dbuspolicydir@
        !           379: dev_headers = @dev_headers@
        !           380: docdir = @docdir@
        !           381: dvidir = @dvidir@
        !           382: exec_prefix = @exec_prefix@
        !           383: fips_mode = @fips_mode@
        !           384: fuzz_plugins = @fuzz_plugins@
        !           385: host = @host@
        !           386: host_alias = @host_alias@
        !           387: host_cpu = @host_cpu@
        !           388: host_os = @host_os@
        !           389: host_vendor = @host_vendor@
        !           390: htmldir = @htmldir@
        !           391: imcvdir = @imcvdir@
        !           392: includedir = @includedir@
        !           393: infodir = @infodir@
        !           394: install_sh = @install_sh@
        !           395: ipsec_script = @ipsec_script@
        !           396: ipsec_script_upper = @ipsec_script_upper@
        !           397: ipsecdir = @ipsecdir@
        !           398: ipsecgroup = @ipsecgroup@
        !           399: ipseclibdir = @ipseclibdir@
        !           400: ipsecuser = @ipsecuser@
        !           401: json_CFLAGS = @json_CFLAGS@
        !           402: json_LIBS = @json_LIBS@
        !           403: libdir = @libdir@
        !           404: libexecdir = @libexecdir@
        !           405: libfuzzer = @libfuzzer@
        !           406: libiptc_CFLAGS = @libiptc_CFLAGS@
        !           407: libiptc_LIBS = @libiptc_LIBS@
        !           408: linux_headers = @linux_headers@
        !           409: localedir = @localedir@
        !           410: localstatedir = @localstatedir@
        !           411: manager_plugins = @manager_plugins@
        !           412: mandir = @mandir@
        !           413: medsrv_plugins = @medsrv_plugins@
        !           414: mkdir_p = @mkdir_p@
        !           415: nm_CFLAGS = @nm_CFLAGS@
        !           416: nm_LIBS = @nm_LIBS@
        !           417: nm_ca_dir = @nm_ca_dir@
        !           418: nm_plugins = @nm_plugins@
        !           419: oldincludedir = @oldincludedir@
        !           420: p_plugins = @p_plugins@
        !           421: pcsclite_CFLAGS = @pcsclite_CFLAGS@
        !           422: pcsclite_LIBS = @pcsclite_LIBS@
        !           423: pdfdir = @pdfdir@
        !           424: piddir = @piddir@
        !           425: pkgpyexecdir = @pkgpyexecdir@
        !           426: pkgpythondir = @pkgpythondir@
        !           427: pki_plugins = @pki_plugins@
        !           428: plugindir = @plugindir@
        !           429: pool_plugins = @pool_plugins@
        !           430: prefix = @prefix@
        !           431: program_transform_name = @program_transform_name@
        !           432: psdir = @psdir@
        !           433: pyexecdir = @pyexecdir@
        !           434: pythondir = @pythondir@
        !           435: random_device = @random_device@
        !           436: resolv_conf = @resolv_conf@
        !           437: routing_table = @routing_table@
        !           438: routing_table_prio = @routing_table_prio@
        !           439: runstatedir = @runstatedir@
        !           440: s_plugins = @s_plugins@
        !           441: sbindir = @sbindir@
        !           442: scepclient_plugins = @scepclient_plugins@
        !           443: scripts_plugins = @scripts_plugins@
        !           444: sharedstatedir = @sharedstatedir@
        !           445: soup_CFLAGS = @soup_CFLAGS@
        !           446: soup_LIBS = @soup_LIBS@
        !           447: srcdir = @srcdir@
        !           448: starter_plugins = @starter_plugins@
        !           449: strongswan_conf = @strongswan_conf@
        !           450: strongswan_options = @strongswan_options@
        !           451: swanctldir = @swanctldir@
        !           452: sysconfdir = @sysconfdir@
        !           453: systemd_CFLAGS = @systemd_CFLAGS@
        !           454: systemd_LIBS = @systemd_LIBS@
        !           455: systemd_daemon_CFLAGS = @systemd_daemon_CFLAGS@
        !           456: systemd_daemon_LIBS = @systemd_daemon_LIBS@
        !           457: systemd_journal_CFLAGS = @systemd_journal_CFLAGS@
        !           458: systemd_journal_LIBS = @systemd_journal_LIBS@
        !           459: systemdsystemunitdir = @systemdsystemunitdir@
        !           460: t_plugins = @t_plugins@
        !           461: target_alias = @target_alias@
        !           462: top_build_prefix = @top_build_prefix@
        !           463: top_builddir = @top_builddir@
        !           464: top_srcdir = @top_srcdir@
        !           465: tss2_CFLAGS = @tss2_CFLAGS@
        !           466: tss2_LIBS = @tss2_LIBS@
        !           467: tss2_esys_CFLAGS = @tss2_esys_CFLAGS@
        !           468: tss2_esys_LIBS = @tss2_esys_LIBS@
        !           469: tss2_socket_CFLAGS = @tss2_socket_CFLAGS@
        !           470: tss2_socket_LIBS = @tss2_socket_LIBS@
        !           471: tss2_sys_CFLAGS = @tss2_sys_CFLAGS@
        !           472: tss2_sys_LIBS = @tss2_sys_LIBS@
        !           473: tss2_tabrmd_CFLAGS = @tss2_tabrmd_CFLAGS@
        !           474: tss2_tabrmd_LIBS = @tss2_tabrmd_LIBS@
        !           475: urandom_device = @urandom_device@
        !           476: wolfssl_CFLAGS = @wolfssl_CFLAGS@
        !           477: wolfssl_LIBS = @wolfssl_LIBS@
        !           478: xml_CFLAGS = @xml_CFLAGS@
        !           479: xml_LIBS = @xml_LIBS@
        !           480: SUBDIRS = man
        !           481: pki_SOURCES = pki.c pki.h command.c command.h \
        !           482:        commands/acert.c \
        !           483:        commands/dn.c \
        !           484:        commands/gen.c \
        !           485:        commands/issue.c \
        !           486:        commands/keyid.c \
        !           487:        commands/pkcs12.c \
        !           488:        commands/pkcs7.c \
        !           489:        commands/print.c \
        !           490:        commands/pub.c \
        !           491:        commands/req.c \
        !           492:        commands/self.c \
        !           493:        commands/signcrl.c \
        !           494:        commands/verify.c
        !           495: 
        !           496: pki_LDADD = \
        !           497:        $(top_builddir)/src/libstrongswan/libstrongswan.la \
        !           498:        $(PTHREADLIB) $(ATOMICLIB) $(DLLIB)
        !           499: 
        !           500: AM_CPPFLAGS = \
        !           501:        -I$(top_srcdir)/src/libstrongswan \
        !           502:        -DPLUGINS=\""${pki_plugins}\""
        !           503: 
        !           504: all: all-recursive
        !           505: 
        !           506: .SUFFIXES:
        !           507: .SUFFIXES: .c .lo .o .obj
        !           508: $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
        !           509:        @for dep in $?; do \
        !           510:          case '$(am__configure_deps)' in \
        !           511:            *$$dep*) \
        !           512:              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
        !           513:                && { if test -f $@; then exit 0; else break; fi; }; \
        !           514:              exit 1;; \
        !           515:          esac; \
        !           516:        done; \
        !           517:        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/pki/Makefile'; \
        !           518:        $(am__cd) $(top_srcdir) && \
        !           519:          $(AUTOMAKE) --gnu src/pki/Makefile
        !           520: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        !           521:        @case '$?' in \
        !           522:          *config.status*) \
        !           523:            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
        !           524:          *) \
        !           525:            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
        !           526:            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
        !           527:        esac;
        !           528: 
        !           529: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        !           530:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
        !           531: 
        !           532: $(top_srcdir)/configure:  $(am__configure_deps)
        !           533:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
        !           534: $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
        !           535:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
        !           536: $(am__aclocal_m4_deps):
        !           537: install-binPROGRAMS: $(bin_PROGRAMS)
        !           538:        @$(NORMAL_INSTALL)
        !           539:        @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
        !           540:        if test -n "$$list"; then \
        !           541:          echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
        !           542:          $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
        !           543:        fi; \
        !           544:        for p in $$list; do echo "$$p $$p"; done | \
        !           545:        sed 's/$(EXEEXT)$$//' | \
        !           546:        while read p p1; do if test -f $$p \
        !           547:         || test -f $$p1 \
        !           548:          ; then echo "$$p"; echo "$$p"; else :; fi; \
        !           549:        done | \
        !           550:        sed -e 'p;s,.*/,,;n;h' \
        !           551:            -e 's|.*|.|' \
        !           552:            -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
        !           553:        sed 'N;N;N;s,\n, ,g' | \
        !           554:        $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
        !           555:          { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
        !           556:            if ($$2 == $$4) files[d] = files[d] " " $$1; \
        !           557:            else { print "f", $$3 "/" $$4, $$1; } } \
        !           558:          END { for (d in files) print "f", d, files[d] }' | \
        !           559:        while read type dir files; do \
        !           560:            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
        !           561:            test -z "$$files" || { \
        !           562:            echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
        !           563:            $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
        !           564:            } \
        !           565:        ; done
        !           566: 
        !           567: uninstall-binPROGRAMS:
        !           568:        @$(NORMAL_UNINSTALL)
        !           569:        @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
        !           570:        files=`for p in $$list; do echo "$$p"; done | \
        !           571:          sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
        !           572:              -e 's/$$/$(EXEEXT)/' \
        !           573:        `; \
        !           574:        test -n "$$list" || exit 0; \
        !           575:        echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
        !           576:        cd "$(DESTDIR)$(bindir)" && rm -f $$files
        !           577: 
        !           578: clean-binPROGRAMS:
        !           579:        @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
        !           580:        echo " rm -f" $$list; \
        !           581:        rm -f $$list || exit $$?; \
        !           582:        test -n "$(EXEEXT)" || exit 0; \
        !           583:        list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
        !           584:        echo " rm -f" $$list; \
        !           585:        rm -f $$list
        !           586: commands/$(am__dirstamp):
        !           587:        @$(MKDIR_P) commands
        !           588:        @: > commands/$(am__dirstamp)
        !           589: commands/$(DEPDIR)/$(am__dirstamp):
        !           590:        @$(MKDIR_P) commands/$(DEPDIR)
        !           591:        @: > commands/$(DEPDIR)/$(am__dirstamp)
        !           592: commands/acert.$(OBJEXT): commands/$(am__dirstamp) \
        !           593:        commands/$(DEPDIR)/$(am__dirstamp)
        !           594: commands/dn.$(OBJEXT): commands/$(am__dirstamp) \
        !           595:        commands/$(DEPDIR)/$(am__dirstamp)
        !           596: commands/gen.$(OBJEXT): commands/$(am__dirstamp) \
        !           597:        commands/$(DEPDIR)/$(am__dirstamp)
        !           598: commands/issue.$(OBJEXT): commands/$(am__dirstamp) \
        !           599:        commands/$(DEPDIR)/$(am__dirstamp)
        !           600: commands/keyid.$(OBJEXT): commands/$(am__dirstamp) \
        !           601:        commands/$(DEPDIR)/$(am__dirstamp)
        !           602: commands/pkcs12.$(OBJEXT): commands/$(am__dirstamp) \
        !           603:        commands/$(DEPDIR)/$(am__dirstamp)
        !           604: commands/pkcs7.$(OBJEXT): commands/$(am__dirstamp) \
        !           605:        commands/$(DEPDIR)/$(am__dirstamp)
        !           606: commands/print.$(OBJEXT): commands/$(am__dirstamp) \
        !           607:        commands/$(DEPDIR)/$(am__dirstamp)
        !           608: commands/pub.$(OBJEXT): commands/$(am__dirstamp) \
        !           609:        commands/$(DEPDIR)/$(am__dirstamp)
        !           610: commands/req.$(OBJEXT): commands/$(am__dirstamp) \
        !           611:        commands/$(DEPDIR)/$(am__dirstamp)
        !           612: commands/self.$(OBJEXT): commands/$(am__dirstamp) \
        !           613:        commands/$(DEPDIR)/$(am__dirstamp)
        !           614: commands/signcrl.$(OBJEXT): commands/$(am__dirstamp) \
        !           615:        commands/$(DEPDIR)/$(am__dirstamp)
        !           616: commands/verify.$(OBJEXT): commands/$(am__dirstamp) \
        !           617:        commands/$(DEPDIR)/$(am__dirstamp)
        !           618: 
        !           619: pki$(EXEEXT): $(pki_OBJECTS) $(pki_DEPENDENCIES) $(EXTRA_pki_DEPENDENCIES) 
        !           620:        @rm -f pki$(EXEEXT)
        !           621:        $(AM_V_CCLD)$(LINK) $(pki_OBJECTS) $(pki_LDADD) $(LIBS)
        !           622: 
        !           623: mostlyclean-compile:
        !           624:        -rm -f *.$(OBJEXT)
        !           625:        -rm -f commands/*.$(OBJEXT)
        !           626: 
        !           627: distclean-compile:
        !           628:        -rm -f *.tab.c
        !           629: 
        !           630: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/command.Po@am__quote@
        !           631: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pki.Po@am__quote@
        !           632: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/acert.Po@am__quote@
        !           633: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/dn.Po@am__quote@
        !           634: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/gen.Po@am__quote@
        !           635: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/issue.Po@am__quote@
        !           636: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/keyid.Po@am__quote@
        !           637: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/pkcs12.Po@am__quote@
        !           638: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/pkcs7.Po@am__quote@
        !           639: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/print.Po@am__quote@
        !           640: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/pub.Po@am__quote@
        !           641: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/req.Po@am__quote@
        !           642: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/self.Po@am__quote@
        !           643: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/signcrl.Po@am__quote@
        !           644: @AMDEP_TRUE@@am__include@ @am__quote@commands/$(DEPDIR)/verify.Po@am__quote@
        !           645: 
        !           646: .c.o:
        !           647: @am__fastdepCC_TRUE@   $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
        !           648: @am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
        !           649: @am__fastdepCC_TRUE@   $(am__mv) $$depbase.Tpo $$depbase.Po
        !           650: @AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
        !           651: @AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
        !           652: @am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
        !           653: 
        !           654: .c.obj:
        !           655: @am__fastdepCC_TRUE@   $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
        !           656: @am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
        !           657: @am__fastdepCC_TRUE@   $(am__mv) $$depbase.Tpo $$depbase.Po
        !           658: @AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
        !           659: @AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
        !           660: @am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
        !           661: 
        !           662: .c.lo:
        !           663: @am__fastdepCC_TRUE@   $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
        !           664: @am__fastdepCC_TRUE@   $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
        !           665: @am__fastdepCC_TRUE@   $(am__mv) $$depbase.Tpo $$depbase.Plo
        !           666: @AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
        !           667: @AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
        !           668: @am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
        !           669: 
        !           670: mostlyclean-libtool:
        !           671:        -rm -f *.lo
        !           672: 
        !           673: clean-libtool:
        !           674:        -rm -rf .libs _libs
        !           675: 
        !           676: # This directory's subdirectories are mostly independent; you can cd
        !           677: # into them and run 'make' without going through this Makefile.
        !           678: # To change the values of 'make' variables: instead of editing Makefiles,
        !           679: # (1) if the variable is set in 'config.status', edit 'config.status'
        !           680: #     (which will cause the Makefiles to be regenerated when you run 'make');
        !           681: # (2) otherwise, pass the desired values on the 'make' command line.
        !           682: $(am__recursive_targets):
        !           683:        @fail=; \
        !           684:        if $(am__make_keepgoing); then \
        !           685:          failcom='fail=yes'; \
        !           686:        else \
        !           687:          failcom='exit 1'; \
        !           688:        fi; \
        !           689:        dot_seen=no; \
        !           690:        target=`echo $@ | sed s/-recursive//`; \
        !           691:        case "$@" in \
        !           692:          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
        !           693:          *) list='$(SUBDIRS)' ;; \
        !           694:        esac; \
        !           695:        for subdir in $$list; do \
        !           696:          echo "Making $$target in $$subdir"; \
        !           697:          if test "$$subdir" = "."; then \
        !           698:            dot_seen=yes; \
        !           699:            local_target="$$target-am"; \
        !           700:          else \
        !           701:            local_target="$$target"; \
        !           702:          fi; \
        !           703:          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
        !           704:          || eval $$failcom; \
        !           705:        done; \
        !           706:        if test "$$dot_seen" = "no"; then \
        !           707:          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        !           708:        fi; test -z "$$fail"
        !           709: 
        !           710: ID: $(am__tagged_files)
        !           711:        $(am__define_uniq_tagged_files); mkid -fID $$unique
        !           712: tags: tags-recursive
        !           713: TAGS: tags
        !           714: 
        !           715: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
        !           716:        set x; \
        !           717:        here=`pwd`; \
        !           718:        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
        !           719:          include_option=--etags-include; \
        !           720:          empty_fix=.; \
        !           721:        else \
        !           722:          include_option=--include; \
        !           723:          empty_fix=; \
        !           724:        fi; \
        !           725:        list='$(SUBDIRS)'; for subdir in $$list; do \
        !           726:          if test "$$subdir" = .; then :; else \
        !           727:            test ! -f $$subdir/TAGS || \
        !           728:              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
        !           729:          fi; \
        !           730:        done; \
        !           731:        $(am__define_uniq_tagged_files); \
        !           732:        shift; \
        !           733:        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
        !           734:          test -n "$$unique" || unique=$$empty_fix; \
        !           735:          if test $$# -gt 0; then \
        !           736:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
        !           737:              "$$@" $$unique; \
        !           738:          else \
        !           739:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
        !           740:              $$unique; \
        !           741:          fi; \
        !           742:        fi
        !           743: ctags: ctags-recursive
        !           744: 
        !           745: CTAGS: ctags
        !           746: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
        !           747:        $(am__define_uniq_tagged_files); \
        !           748:        test -z "$(CTAGS_ARGS)$$unique" \
        !           749:          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
        !           750:             $$unique
        !           751: 
        !           752: GTAGS:
        !           753:        here=`$(am__cd) $(top_builddir) && pwd` \
        !           754:          && $(am__cd) $(top_srcdir) \
        !           755:          && gtags -i $(GTAGS_ARGS) "$$here"
        !           756: cscopelist: cscopelist-recursive
        !           757: 
        !           758: cscopelist-am: $(am__tagged_files)
        !           759:        list='$(am__tagged_files)'; \
        !           760:        case "$(srcdir)" in \
        !           761:          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
        !           762:          *) sdir=$(subdir)/$(srcdir) ;; \
        !           763:        esac; \
        !           764:        for i in $$list; do \
        !           765:          if test -f "$$i"; then \
        !           766:            echo "$(subdir)/$$i"; \
        !           767:          else \
        !           768:            echo "$$sdir/$$i"; \
        !           769:          fi; \
        !           770:        done >> $(top_builddir)/cscope.files
        !           771: 
        !           772: distclean-tags:
        !           773:        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
        !           774: 
        !           775: distdir: $(DISTFILES)
        !           776:        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        !           777:        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        !           778:        list='$(DISTFILES)'; \
        !           779:          dist_files=`for file in $$list; do echo $$file; done | \
        !           780:          sed -e "s|^$$srcdirstrip/||;t" \
        !           781:              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
        !           782:        case $$dist_files in \
        !           783:          */*) $(MKDIR_P) `echo "$$dist_files" | \
        !           784:                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
        !           785:                           sort -u` ;; \
        !           786:        esac; \
        !           787:        for file in $$dist_files; do \
        !           788:          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
        !           789:          if test -d $$d/$$file; then \
        !           790:            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
        !           791:            if test -d "$(distdir)/$$file"; then \
        !           792:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
        !           793:            fi; \
        !           794:            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
        !           795:              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
        !           796:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
        !           797:            fi; \
        !           798:            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
        !           799:          else \
        !           800:            test -f "$(distdir)/$$file" \
        !           801:            || cp -p $$d/$$file "$(distdir)/$$file" \
        !           802:            || exit 1; \
        !           803:          fi; \
        !           804:        done
        !           805:        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
        !           806:          if test "$$subdir" = .; then :; else \
        !           807:            $(am__make_dryrun) \
        !           808:              || test -d "$(distdir)/$$subdir" \
        !           809:              || $(MKDIR_P) "$(distdir)/$$subdir" \
        !           810:              || exit 1; \
        !           811:            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
        !           812:            $(am__relativize); \
        !           813:            new_distdir=$$reldir; \
        !           814:            dir1=$$subdir; dir2="$(top_distdir)"; \
        !           815:            $(am__relativize); \
        !           816:            new_top_distdir=$$reldir; \
        !           817:            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
        !           818:            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
        !           819:            ($(am__cd) $$subdir && \
        !           820:              $(MAKE) $(AM_MAKEFLAGS) \
        !           821:                top_distdir="$$new_top_distdir" \
        !           822:                distdir="$$new_distdir" \
        !           823:                am__remove_distdir=: \
        !           824:                am__skip_length_check=: \
        !           825:                am__skip_mode_fix=: \
        !           826:                distdir) \
        !           827:              || exit 1; \
        !           828:          fi; \
        !           829:        done
        !           830: check-am: all-am
        !           831: check: check-recursive
        !           832: all-am: Makefile $(PROGRAMS)
        !           833: installdirs: installdirs-recursive
        !           834: installdirs-am:
        !           835:        for dir in "$(DESTDIR)$(bindir)"; do \
        !           836:          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        !           837:        done
        !           838: install: install-recursive
        !           839: install-exec: install-exec-recursive
        !           840: install-data: install-data-recursive
        !           841: uninstall: uninstall-recursive
        !           842: 
        !           843: install-am: all-am
        !           844:        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
        !           845: 
        !           846: installcheck: installcheck-recursive
        !           847: install-strip:
        !           848:        if test -z '$(STRIP)'; then \
        !           849:          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
        !           850:            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
        !           851:              install; \
        !           852:        else \
        !           853:          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
        !           854:            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
        !           855:            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
        !           856:        fi
        !           857: mostlyclean-generic:
        !           858: 
        !           859: clean-generic:
        !           860: 
        !           861: distclean-generic:
        !           862:        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
        !           863:        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
        !           864:        -rm -f commands/$(DEPDIR)/$(am__dirstamp)
        !           865:        -rm -f commands/$(am__dirstamp)
        !           866: 
        !           867: maintainer-clean-generic:
        !           868:        @echo "This command is intended for maintainers to use"
        !           869:        @echo "it deletes files that may require special tools to rebuild."
        !           870: clean: clean-recursive
        !           871: 
        !           872: clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
        !           873: 
        !           874: distclean: distclean-recursive
        !           875:        -rm -rf ./$(DEPDIR) commands/$(DEPDIR)
        !           876:        -rm -f Makefile
        !           877: distclean-am: clean-am distclean-compile distclean-generic \
        !           878:        distclean-tags
        !           879: 
        !           880: dvi: dvi-recursive
        !           881: 
        !           882: dvi-am:
        !           883: 
        !           884: html: html-recursive
        !           885: 
        !           886: html-am:
        !           887: 
        !           888: info: info-recursive
        !           889: 
        !           890: info-am:
        !           891: 
        !           892: install-data-am:
        !           893: 
        !           894: install-dvi: install-dvi-recursive
        !           895: 
        !           896: install-dvi-am:
        !           897: 
        !           898: install-exec-am: install-binPROGRAMS
        !           899: 
        !           900: install-html: install-html-recursive
        !           901: 
        !           902: install-html-am:
        !           903: 
        !           904: install-info: install-info-recursive
        !           905: 
        !           906: install-info-am:
        !           907: 
        !           908: install-man:
        !           909: 
        !           910: install-pdf: install-pdf-recursive
        !           911: 
        !           912: install-pdf-am:
        !           913: 
        !           914: install-ps: install-ps-recursive
        !           915: 
        !           916: install-ps-am:
        !           917: 
        !           918: installcheck-am:
        !           919: 
        !           920: maintainer-clean: maintainer-clean-recursive
        !           921:        -rm -rf ./$(DEPDIR) commands/$(DEPDIR)
        !           922:        -rm -f Makefile
        !           923: maintainer-clean-am: distclean-am maintainer-clean-generic
        !           924: 
        !           925: mostlyclean: mostlyclean-recursive
        !           926: 
        !           927: mostlyclean-am: mostlyclean-compile mostlyclean-generic \
        !           928:        mostlyclean-libtool
        !           929: 
        !           930: pdf: pdf-recursive
        !           931: 
        !           932: pdf-am:
        !           933: 
        !           934: ps: ps-recursive
        !           935: 
        !           936: ps-am:
        !           937: 
        !           938: uninstall-am: uninstall-binPROGRAMS
        !           939: 
        !           940: .MAKE: $(am__recursive_targets) install-am install-strip
        !           941: 
        !           942: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
        !           943:        check-am clean clean-binPROGRAMS clean-generic clean-libtool \
        !           944:        cscopelist-am ctags ctags-am distclean distclean-compile \
        !           945:        distclean-generic distclean-libtool distclean-tags distdir dvi \
        !           946:        dvi-am html html-am info info-am install install-am \
        !           947:        install-binPROGRAMS install-data install-data-am install-dvi \
        !           948:        install-dvi-am install-exec install-exec-am install-html \
        !           949:        install-html-am install-info install-info-am install-man \
        !           950:        install-pdf install-pdf-am install-ps install-ps-am \
        !           951:        install-strip installcheck installcheck-am installdirs \
        !           952:        installdirs-am maintainer-clean maintainer-clean-generic \
        !           953:        mostlyclean mostlyclean-compile mostlyclean-generic \
        !           954:        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
        !           955:        uninstall-am uninstall-binPROGRAMS
        !           956: 
        !           957: .PRECIOUS: Makefile
        !           958: 
        !           959: 
        !           960: pki.o :        $(top_builddir)/config.status
        !           961: 
        !           962: # Tell versions [3.59,3.63) of GNU make to not export all variables.
        !           963: # Otherwise a system limit (for SysV at least) may be exceeded.
        !           964: .NOEXPORT:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>