Diff for /embedaddon/sudo/INSTALL between versions 1.1.1.1 and 1.1.1.5

version 1.1.1.1, 2012/02/21 16:23:01 version 1.1.1.5, 2014/06/15 16:12:53
Line 7  more options than it did before.  Please read this doc Line 7  more options than it did before.  Please read this doc
 before configuring and building sudo.  You may also wish to read the  before configuring and building sudo.  You may also wish to read the
 file INSTALL.configure which explains more about the `configure' script.  file INSTALL.configure which explains more about the `configure' script.
   
   System requirements
   ===================
   
   To build sudo from the source distribution you need a POSIX-compliant
   operating system (any modern version of BSD, Linux or Unix should work),
   an ANSI/ISO C compiler that supports the "long long" type, variadic
   macros (a C99 feature) as well as the ar, make and ranlib utilities.
   
   If you wish to modify the parser then you will need flex version
   2.5.2 or later and either bison or byacc (sudo comes with a
   pre-generated parser).  You'll also have to run configure with the
   --with-devel option or pass DEVEL=1 to make.  You can get flex from
   http://flex.sourceforge.net/.  You can get GNU bison from
   ftp://ftp.gnu.org/pub/gnu/bison/ or any GNU mirror.
   
 Simple sudo installation  Simple sudo installation
 ========================  ========================
   
Line 19  For most systems and configurations it is possible sim Line 34  For most systems and configurations it is possible sim
        "gotchas" relating to your operating system.         "gotchas" relating to your operating system.
   
     2) `cd' to the source or build directory and type `./configure'      2) `cd' to the source or build directory and type `./configure'
       to generate a Makefile and config.h file suitable for       to generate a Makefile and config.h file suitable for building
       building sudo.  Before you actually run configure you       sudo.  Before you actually run configure you should read the
       should read the `Available configure options' section       `Available configure options' section to see if there are
       to see if there are any special options you may want       any special options you may want or need.
       or need. 
   
    3) Edit the configure-generated Makefile if you wish to    4) Type `make' to compile sudo.  If you are building sudo
       change any of the default paths (alternatively, you could 
       have changed the paths via options to `configure'. 
 
    5) Type `make' to compile sudo.  If you are building sudo 
        in a separate build tree (apart from the sudo source) GNU         in a separate build tree (apart from the sudo source) GNU
        make will probably be required.  If `configure' did its job         make will probably be required.  If `configure' did its job
        properly (and you have a supported configuration) there won't         properly (and you have a supported configuration) there won't
        be any problems.  If this doesn't work, take a look at the         be any problems.  If this doesn't work, take a look at the
       TROUBLESHOOTING file for tips on what might have gone wrong.       doc/TROUBLESHOOTING file for tips on what might have gone
       Please mail us if you have a fix or if you are unable to       wrong.  Please mail us if you have a fix or if you are unable
       come up with a fix (address at EOF).       to come up with a fix (address at EOF).
   
    6) Type `make install' (as root) to install sudo, visudo, the    5) Type `make install' (as root) to install sudo, visudo, the
        man pages, and a skeleton sudoers file.  Note that the install         man pages, and a skeleton sudoers file.  Note that the install
        will not overwrite an existing sudoers file.  You can also         will not overwrite an existing sudoers file.  You can also
        install various pieces the package via the install-binaries,         install various pieces the package via the install-binaries,
        install-doc, and install-sudoers make targets.         install-doc, and install-sudoers make targets.
   
    7) Edit the sudoers file with `visudo' as necessary for your    6) Edit the sudoers file with `visudo' as necessary for your
        site.  You will probably want to refer the sample.sudoers         site.  You will probably want to refer the sample.sudoers
        file and sudoers man page included with the sudo package.         file and sudoers man page included with the sudo package.
   
    8) If you want to use syslogd(8) to do the logging, you'll need    7) If you want to use syslogd(8) to do the logging, you'll need
        to update your /etc/syslog.conf file.  See the sample.syslog.conf         to update your /etc/syslog.conf file.  See the sample.syslog.conf
        file included in the distribution for an example.         file included in the distribution for an example.
   
Line 74  Configuration: Line 84  Configuration:
   --quiet, --silent, -q    --quiet, --silent, -q
         Do not print `checking...' messages          Do not print `checking...' messages
   
     --srcdir=DIR
           Find the sources in DIR [configure dir or `..']
   
 Directory and file names:  Directory and file names:
   --prefix=PREFIX    --prefix=PREFIX
        Install architecture-independent files in PREFIX This really only        Install architecture-independent files in PREFIX.  [/usr/local]
        applies to man pages.  [/usr/local] 
   
   --exec-prefix=EPREFIX    --exec-prefix=EPREFIX
        Install architecture-dependent files in EPREFIX This includes the        Install architecture-dependent files in EPREFIX.
        sudo and visudo executables.  [same as prefix]        This includes the executables and plugins.  [same as PREFIX]
   
   --bindir=DIR    --bindir=DIR
        Install `sudo' in DIR [EPREFIX/bin]        Install `sudo', `sudoedit' and `sudoreplay' in DIR. [EPREFIX/bin]
   
   --sbindir=DIR    --sbindir=DIR
        Install `visudo' in DIR [EPREFIX/sbin]        Install `visudo' in DIR. [EPREFIX/sbin]
   
     --libexecdir=DIR
           Install plugins and helper programs in DIR/sudo [PREFIX/libexec/sudo]
   
   --sysconfdir=DIR    --sysconfdir=DIR
        Install `sudoers' file in DIR [/etc]        Look for `sudo.conf' and `sudoers' files in DIR. [/etc]
   
     --includedir=DIR
           Install sudo_plugin.h include file in DIR [PREFIX/include]
   
     --datarootdir=DIR
           Root directory for platform-independent data files [PREFIX/share]
   
     --localedir=DIR
           Install sudo and sudoers locale files in DIR [DATAROOTDIR/locale]
   
   --mandir=DIR    --mandir=DIR
         Install man pages in DIR [PREFIX/man]          Install man pages in DIR [PREFIX/man]
   
  --srcdir=DIR  --docdir=DIR
        Find the sources in DIR [configure dir or ..]        Install other sudo documentation in DIR [DATAROOTDIR/doc/sudo]
   
Special features/options:  --with-plugindir=DIR
         Set the directory that sudo looks in to find the policy and I/O
         logging plugins.  Defaults to the LIBEXEC/sudo.
 
   --with-rundir=DIR
         Set the directory to be used for sudo-specific files that
         do not survive a system reboot.  This is typically where
         the time stamp directory is located.  By default, configure
         will use the first existing directory in the following list:
             /var/run, /var/db, /var/lib, /var/adm, /usr/adm
         This directory should be cleared when the system reboots.
         On systems that lack /var/run, the default rundir and vardir
         may be the same.  In this case, only the ts directory inside
         the rundir needs to be cleared at boot time.
 
   --with-vardir=DIR
         Set the directory to be used for sudo-specific files that
         survive a system reboot.  This is typically where the lecture
         status directory is stored.  By default, configure will use
         the first existing directory in the following list:
             /var/db, /var/lib, /var/adm, /usr/adm
         This directory should not be cleared when the system boots.
 
 Compilation options:
   --disable-hardening
         Disable the use of compiler/linker exploit mitigation options
         which are enabled by default.  This includes compiling with
         _FORTIFY_SOURCE defined to 2, building with -fstack-protector
         and linking with -zrelro, where supported.
 
   --enable-pie
         Build sudo and related programs as as a position independent
         executables (PIE).  This improves the effectiveness of address
         space layout randomization (ASLR) on systems that support it.
         Sudo will create PIE binaries by default on Linux systems.
 
   --disable-pie
         Disable the creation of position independent executables (PIE),
         even if the compiler creates PIE binaries by default.  This
         option may be needed on some Linux systems where PIE binaries
         are not fully supported.
 
   --disable-poll
         Use select() instead of poll() in the event loop.  By default,
         sudo will use poll() on systems that support it.  Some systems
         have a broken poll() implementation and need to use select instead.
         On Mac OS X, select() is always used since its poll() doesn't
         support devices.
 
   --disable-rpath
         By default, configure will use -Rpath in addition to -Lpath
         when passing library paths to the loader.  This option will
         disable the use of -Rpath.
 
   --disable-shared
         Disable dynamic shared object support.  By default, sudo
         is built with a plugin API capable of loading arbitrary
         policy and I/O logging plugins.  If the --disable-shared
         option is specified, this support is disabled and the default
         sudoers policy and I/O plugins are embedded in the sudo
         binary itself.  This will also disable the noexec option
         as it too relies on dynamic shared object support.
 
   --enable-static-sudoers
         By default, the sudoers plugin is built and installed as a
         dynamic shared object.  When the --enable-static-sudoers
         option is specified, the sudoers plugin is compiled directly
         into the sudo binary.  Unlike --disable-shared, this does
         not prevent other plugins from being used and the noexec
         option will continue to function.
 
   --enable-zlib[=location]
         Enable the use of the zlib compress library when storing
         I/O log files.  If specified, location is the base directory
         containing the zlib include and lib directories.  The special
         values "system" and "builtin" can be used to indicate that
         the system version of zlib should be used or that the version
         of zlib shipped with sudo should be used instead.
         If this option is not specified, configure will use the
         system zlib if it is present.
 
   --with-incpath=DIR    --with-incpath=DIR
         Adds the specified directory (or directories) to CPPFLAGS          Adds the specified directory (or directories) to CPPFLAGS
         so configure and the compiler will look there for include          so configure and the compiler will look there for include
         files.  Multiple directories may be specified as long as          files.  Multiple directories may be specified as long as
         they are space separated.          they are space separated.
        Eg: --with-incpath="/usr/local/include /opt/include"        E.g. --with-incpath="/usr/local/include /opt/include"
   
   --with-libpath=DIR    --with-libpath=DIR
         Adds the specified directory (or directories) to LDFLAGS          Adds the specified directory (or directories) to LDFLAGS
         so configure and the compiler will look there for libraries.          so configure and the compiler will look there for libraries.
         Multiple directories may be specified as with --with-incpath.          Multiple directories may be specified as with --with-incpath.
   
   --with-rpath  
         Tells configure to use -Rpath in addition to -Lpath when  
         passing library paths to the loader.  This option is on  
         by default for Solaris and SVR4.  
   
   --with-blibpath[=PATH]  
         Tells configure to construct a -blibpath argument to the  
         loader.  If a PATH is specified, it will be used as the  
         base.  Otherwise, "/usr/lib:/lib:/usr/local/lib" will be  
         used for gcc and "/usr/lib:/lib" for non-gcc.  Additional  
         library paths will be appended as needed by configure.  
         This option is only valid for AIX where it is on by default.  
   
   --with-libraries=LIBRARY    --with-libraries=LIBRARY
        Adds the specified library (or libaries) to SUDO_LIBS and        Adds the specified library (or libraries) to SUDO_LIBS and
         and VISUDO_LIBS so sudo will link against them.  If the          and VISUDO_LIBS so sudo will link against them.  If the
         library doesn't start with `-l' or end in `.a' or `.o' a          library doesn't start with `-l' or end in `.a' or `.o' a
        `-l' will be prepended to it.  Multiple libraries may be        `-l' will be pre-pended to it.  Multiple libraries may be
         specified as long as they are space separated.          specified as long as they are space separated.
   
  --with-plugindir=PATH  --with-libtool=PATH
        Set the directory that sudo looks in to find the policy and I/O        By default, sudo will use the included version of libtool
        logging plugins.  Defaults to the libexec dir used by configure.        to build shared libraries.  The --with-libtool option can
         be used to specify a different version of libtool to use.
         The special values "system" and "builtin" can be used in
         place of a path to denote the default system libtool (obtained
         via the user's PATH) and the default libtool that comes
         with sudo.
   
  --with-efenceOptional features:
        Link with the "electric fence" debugging malloc.  --disable-root-mailer
         By default sudo will run the mailer as root when tattling
         on a user so as to prevent that user from killing the mailer.
         With this option, sudo will run the mailer as the invoking
         user which some people consider to be safer.
   
  --with-bsm-audit  --enable-nls[=location]
        Enable support for sudo BSM audit logs on systems that support        Enable natural language support using the gettext() family
        it.  Currently only supported under FreeBSD and Mac OS X.        of functions.  If specified, location is the base directory
         containing the libintl include and lib directories.  If
         this option is not specified, configure will look for the
         gettext() family of functions in the standard C library
         first, then check for a standalone libintl (linking with
         libiconv as needed).
   
  --with-csops  --disable-nls
        Add CSOps standard options.  You probably aren't interested in this.        Disable natural language support.  By default, sudo will
         use the gettext() family of functions, if available, to
         implement messages in the invoking user's native language.
         Note that translations do not exist for all languages.
   
   --with-devel  
         Configure development options.  This will enable compiler warnings  
         and set the Makefile to be able to regenerate the sudoers parser  
         as well as the manual pages.  
   
   --with-linux-audit  
         Enable audit support for Linux systems.  Audits attempts  
         to run a command as well as SELinux role changes.  
   
   --with-skey[=DIR]  
         Enable S/Key OTP (One Time Password) support.  If specified,  
         DIR should contain include and lib directories with skey.h  
         and libskey.a respectively.  
   
   --with-opie[=DIR]  
         Enable NRL OPIE OTP (One Time Password) support.  If specified,  
         DIR should contain include and lib directories with opie.h  
         and libopie.a respectively.  
   
   --with-SecurID[=DIR]  
         Enable SecurID support.  If specified, DIR is directory containing  
         sdiclient.a, sdi_athd.h, sdconf.h, and sdacmvls.h.  
   
   --with-fwtk[=DIR]  
         Enable TIS Firewall Toolkit (FWTK) 'authsrv' support. If specified,  
         DIR is the base directory containing the compiled FWTK package  
         (or at least the library and header files).  
   
   --with-kerb4[=DIR]  
         Enable Kerberos IV support.  If specified, DIR is the base  
         directory containing the Kerberos IV include and lib dirs.  
         This uses Kerberos passphrases for authentication but does  
         not use the Kerberos cookie scheme.  
   
   --with-kerb5[=DIR]  
         Enable Kerberos V support.  If specified, DIR is the base  
         directory containing the Kerberos V include and lib dirs.  
         This This uses Kerberos passphrases for authentication but  
         does not use the Kerberos cookie scheme.  Will not work for  
         Kerberos V older than version 1.1.  
   
   --with-ldap[=DIR]    --with-ldap[=DIR]
         Enable LDAP support.  If specified, DIR is the base directory          Enable LDAP support.  If specified, DIR is the base directory
         containing the LDAP include and lib directories.  Please see          containing the LDAP include and lib directories.  Please see
Line 200  Special features/options: Line 267  Special features/options:
         this file instead of /etc/ldap.secret to read the secret password          this file instead of /etc/ldap.secret to read the secret password
         when rootbinddn is specified in the ldap config file.          when rootbinddn is specified in the ldap config file.
   
  --with-nsswitch[=PATH]  --with-logincap
        Path to nsswitch.conf or "no" to disable nsswitch support.        This adds support for login classes specified in /etc/login.conf.
        If specified, sudo uses this file instead of /etc/nsswitch.conf.        It is enabled by default on BSD/OS, Darwin, FreeBSD, OpenBSD and
        If nsswitch is disabled but LDAP is enabled, sudo will check        NetBSD (where available).  By default, a login class is not applied
        LDAP first, then the sudoers file.        unless the 'use_loginclass' option is defined in sudoers or the user
         specifies a class on the command line.
   
     --with-interfaces=no, --without-interfaces
           This option keeps sudo from trying to glean the ip address
           from each attached Ethernet interface.  It is only useful
           on a machine where sudo's interface reading support does
           not work, which may be the case on some SysV-based OS's
           using STREAMS.
   
     --with-noexec[=PATH]
           Enable support for the "noexec" functionality which prevents
           a dynamically-linked program being run by sudo from executing
           another program (think shell escapes).  Please see the
           "PREVENTING SHELL ESCAPES" section in the sudoers man page
           for details.  If specified, PATH should be a fully qualified
           path name, e.g. /usr/local/libexec/sudo_noexec.so.  If PATH
           is "no", noexec support will not be compiled in.  The default
           is to compile noexec support if libtool supports building
           shared objects on your OS.
   
     --with-selinux 
           Enable support for role based access control (RBAC) on
           systems that support SELinux.
   
     --with-sssd
           Enable support for using the System Security Services Daemon
           (SSSD) as a sudoers data source.  For more information on
           SSD, see http://fedorahosted.org/sssd/
   
     --with-sssd-lib=PATH
           Specify the path to the SSSD shared library, which is loaded
           at run-time.
   
   Operating system-specific options:
     --disable-setreuid
           Disable use of the setreuid() function for operating systems
           where it is broken.  For instance, 4.4BSD has setreuid()
           that is not fully functional.
   
     --disable-setresuid
           Disable use of the setresuid() function for operating systems
           where it is broken (none currently known).
   
     --enable-admin-flag
           Enable the creation of an Ubuntu-style admin flag file
           the first time sudo is run.
   
     --with-bsm-audit
           Enable support for sudo BSM audit logs on systems that support it.
           This includes recent versions of FreeBSD, Mac OS X and Solaris.
   
     --with-linux-audit
           Enable audit support for Linux systems.  Audits attempts
           to run a command as well as SELinux role changes.
   
     --with-man
           Use the "man" macros for manual pages.  By default, mdoc versions
           of the manuals are installed if supported.  This can be used to
           override configure's test for "nroff -mdoc" support.
   
     --with-mdoc
           Use the "mdoc" macros for manual pages.  By default, mdoc versions
           of the manuals are installed if supported.  This can be used to
           override configure's test for "nroff -mdoc" support.
   
   --with-netsvc[=PATH]    --with-netsvc[=PATH]
         Path to netsvc.conf or "no" to disable netsvc.conf support.          Path to netsvc.conf or "no" to disable netsvc.conf support.
         If specified, sudo uses this file instead of /etc/netsvc.conf          If specified, sudo uses this file instead of /etc/netsvc.conf
        on AIX systems.        on AIX systems.  If netsvc support is disabled but LDAP is
         enabled, sudo will check LDAP first, then the sudoers file.
   
     --with-nsswitch[=PATH]
           Path to nsswitch.conf or "no" to disable nsswitch support.
           If specified, sudo uses this file instead of /etc/nsswitch.conf.
           If nsswitch support is disabled but LDAP is enabled, sudo will
           check LDAP first, then the sudoers file.
   
     --with-project
           Enable support for Solaris project resource limits.
           This option is only available on Solaris 9 and above.
   
   Authentication options:
     --with-AFS
           Enable AFS support with Kerberos authentication.  Should work under
           AFS 3.3.  If your AFS doesn't have -laudit you should be able to
           link without it.
   
   --with-aixauth    --with-aixauth
         Enable support for the AIX 4.x general authentication function.          Enable support for the AIX 4.x general authentication function.
         This will use the authentication scheme specified for the user          This will use the authentication scheme specified for the user
         on the machine.  It is on by default for AIX systems that          on the machine.  It is on by default for AIX systems that
         support it.          support it.
   
     --with-bsdauth
           Enable support for BSD authentication.  This is the default
           for BSD/OS and OpenBSD systems that support it.
           It is not possible to mix BSD authentication with other
           authentication methods (and there really should be no need
           to do so).  Note that only the newer BSD authentication API
           is supported.  If you don't have /usr/include/bsd_auth.h
           then you cannot use this.
   
     --with-DCE
           Enable DCE support for systems without PAM.  Known to work on
           HP-UX 9.X, 10.X, and 11.0; other systems may require source
           code and/or `configure' changes.  On systems with PAM support
           (such as HP-UX 11.0 and higher, Solaris, FreeBSD and Linux), the
           DCE PAM module (usually libpam_dce) should be used instead.
   
     --with-fwtk[=DIR]
           Enable TIS Firewall Toolkit (FWTK) 'authsrv' support. If specified,
           DIR is the base directory containing the compiled FWTK package
           (or at least the library and header files).
   
     --with-kerb5[=DIR]
           Enable Kerberos V support.  If specified, DIR is the base
           directory containing the Kerberos V include and lib dirs.
           This uses Kerberos pass phrases for authentication but
           does not use the Kerberos cookie scheme.  Will not work for
           Kerberos V older than version 1.1.
   
     --enable-kerb5-instance=string
           By default, the user name is used as the principal name
           when authenticating via Kerberos V.  If this option is
           enabled, the specified instance string will be appended to
           the user name (separated by a slash) when creating the
           principal name.
   
     --with-opie[=DIR]
           Enable NRL OPIE OTP (One Time Password) support.  If specified,
           DIR should contain include and lib directories with opie.h
           and libopie.a respectively.
   
     --with-otp-only
           This option is now just an alias for --without-passwd.
   
   --with-pam    --with-pam
         Enable PAM support.  This is on by default for Darwin, FreeBSD,          Enable PAM support.  This is on by default for Darwin, FreeBSD,
         Linux, Solaris and HP-UX (version 11 and higher).          Linux, Solaris and HP-UX (version 11 and higher).
Line 237  Special features/options: Line 428  Special features/options:
         option from "sudo" to "sudo-i", allowing for a separate pam          option from "sudo" to "sudo-i", allowing for a separate pam
         configuration for sudo's initial login mode.          configuration for sudo's initial login mode.
   
   --with-AFS  
         Enable AFS support with Kerberos authentication.  Should work under  
         AFS 3.3.  If your AFS doesn't have -laudit you should be able to  
         link without it.  
   
   --with-DCE  
         Enable DCE support for systems without PAM.  Known to work on  
         HP-UX 9.X, 10.X, and 11.0; other systems may require source  
         code and/or `configure' changes.  On systems with PAM support  
         (such as HP-UX 11.0 and higher, Solaris, FreeBSD and Linux), the  
         DCE PAM module (usually libpam_dce) should be used instead.  
   
   --with-logincap  
         This adds support for login classes specified in /etc/login.conf.  
         It is enabled by default on BSD/OS, Darwin, FreeBSD, OpenBSD and  
         NetBSD (where available).  By default, a login class is not applied  
         unless the 'use_loginclass' option is defined in sudoers or the user  
         specifies a class on the command line.  
   
   --with-bsdauth  
         Enable support for BSD authentication.  This is the default  
         for BSD/OS and OpenBSD systems that support it.  
         It is not possible to mix BSD authentication with other  
         authentication methods (and there really should be no need  
         to do so).  Note that only the newer BSD authentication API  
         is supported.  If you don't have /usr/include/bsd_auth.h  
         then you cannot use this.  
   
   --with-project  
         Enable support for Solaris project resource limits.  
         This option is only available on Solaris 9 and above.  
   
   --with-noexec[=PATH]  
         Enable support for the "noexec" functionality which prevents  
         a dynamically-linked program being run by sudo from executing  
         another program (think shell escapes).  Please see the  
         "PREVENTING SHELL ESCAPES" section in the sudoers man page  
         for details.  If specified, PATH should be a fully qualified  
         path name, e.g. /usr/local/libexec/sudo_noexec.so.  If PATH  
         is "no", noexec support will not be compiled in.  The default  
         is to compile noexec support if libtool supports building  
         shared objects on your OS.  
   
   --disable-pam-session    --disable-pam-session
         Disable sudo's PAM session support.  This may be needed on          Disable sudo's PAM session support.  This may be needed on
         older PAM implementations or on operating systems where          older PAM implementations or on operating systems where
         opening a PAM session changes the utmp or wtmp files.  If          opening a PAM session changes the utmp or wtmp files.  If
         PAM session support is disabled, resource limits may not          PAM session support is disabled, resource limits may not
        be updatedin for command being run.        be updated for the command being run.
   
  --disable-root-mailer  --with-passwd=no, --without-passwd
        By default sudo will run the mailer as root when tattling        This option excludes authentication via the passwd (or
        on a user so as to prevent that user from killing the mailer.        shadow) file.  It should only be used when another, alternative,
        With this option, sudo will run the mailer as the invoking        authentication scheme is in use.
        user which some people consider to be safer. 
   
  --disable-setreuid  --with-SecurID[=DIR]
        Disable use of the setreuid() function for operating systems        Enable SecurID support.  If specified, DIR is directory containing
        where it is broken.  Mac OS X has setreuid() but it doesn't        libaceclnt.a, acexport.h, and sdacmvls.h.
        really work. 
   
  --disable-setresuid  --with-skey[=DIR]
        Disable use of the setresuid() function for operating systems        Enable S/Key OTP (One Time Password) support.  If specified,
        where it is broken (none currently known).        DIR should contain include and lib directories with skey.h
         and libskey.a respectively.
   
   --disable-sia    --disable-sia
         Disable SIA support.  This is the "Security Integration          Disable SIA support.  This is the "Security Integration
Line 312  Special features/options: Line 459  Special features/options:
         in shadow password support and use a shadow password if it          in shadow password support and use a shadow password if it
         exists.          exists.
   
  --with-sudoers-mode=MODE  --enable-gss-krb5-ccache-name
        File mode for the sudoers file (octal).  Note that if you        Use the gss_krb5_ccache_name() function to set the Kerberos
        wish to NFS-mount the sudoers file this must be group        V credential cache file name.  By default, sudo will use
        readable.  Also note that this is actually set in the        the KRB5CCNAME environment variable to set this.  While
        Makefile.  The default mode is 0440.        gss_krb5_ccache_name() provides a better API to do this it
         is not supported by all Kerberos V and SASL combinations.
   
  --with-sudoers-uid=UIDDevelopment options:
        User id that "owns" the sudoers file.  Note that this is  --enable-env-debug
        the numeric id, *not* the symbolic name.  Also note that        Enable debugging of the environment setting functions.  This
        this is actually set in the Makefile.  The default is 0.        enables extra checks to make sure the environment does not
         become corrupted.
   
  --with-sudoers-gid=GID  --enable-warnings
        Group id that "owns" the sudoers file.  Note that this is        Enable compiler warnings when building sudo with gcc.
        the numeric id, *not* the symbolic name.  Also note that 
        this is actually set in the Makefile.  The default is 0. 
   
  --without-interfaces  --enable-werror
        This option keeps sudo from trying to glean the ip address        Enable the -Werror compiler option when building sudo with gcc.
        from each attached ethernet interface.  It is only useful 
        on a machine where sudo's interface reading support does 
        not work, which may be the case on some SysV-based OS's 
        using STREAMS. 
   
  --without-passwd  --with-devel
        This option excludes authentication via the passwd (or        Configure development options.  This will enable compiler warnings
        shadow) file.  It should only be used when another, alternative,        and set up the Makefile to be able to regenerate the sudoers parser
        authentication scheme is in use.        as well as the manual pages.
   
  --with-otp-only  --with-efence
        This option is now just an alias for --without-passwd.        Link with the "electric fence" debugging malloc.
   
  --with-stowOptions that set runtime-changeable default values:
        Properly handle GNU stow packaging.  The sudoers file will  --disable-authentication
        physically live in ${prefix}/etc and /etc/sudoers will be        By default, sudo requires the user to authenticate via a
        a symbolic link.        password or similar means.  This options causes sudo to
         *not* require authentication.  It is possible to turn
         authentication back on in sudoers via the PASSWD attribute.
         Sudoers option: !authenticate
   
  --with-selinux   --disable-env-reset
        Enable support for role based access control (RBAC) on        Disable environment resetting.  This sets the default value
        systems that support SELinux.        of the "env_reset" Defaults option in sudoers to false.
         Sudoers option: !env_reset
   
The following options are also configurable at runtime:  --disable-path-info
         Normally, sudo will tell the user when a command could not be found
         in their $PATH.  Some sites may wish to disable this as it could
         be used to gather information on the location of executables that
         the normal user does not have access to.  The disadvantage is that
         if the executable is simply not in the user's path, sudo will tell
         the user that they are not allowed to run it, which can be confusing.
         Sudoers option: path_info
   
  --with-long-otp-prompt  --disable-root-sudo
        When validating with a One Time Password scheme (S/Key or        Don't let root run sudo.  This can be used to prevent people from
        OPIE), a two-line prompt is used to make it easier to cut        "chaining" sudo commands to get a root shell by doing something
        and paste the challenge to a local window.  It's not as        like "sudo sudo /bin/sh".
        pretty as the default but some people find it more convenient.        Sudoers option: !root_sudo
   
  --with-logging=TYPE  --disable-zlib
        How you want to do your logging.  You may choose "syslog",        Disable the use of the zlib compress library when storing
        "file", or "both".  Setting this to "syslog" is nice because        I/O log files.
        you can keep all of your sudo logs in one place (see the        Sudoers option: !compress_io
        sample.syslog.conf file).  The default is "syslog". 
   
  --with-logfac=FACILITY  --enable-log-host
        Determines which syslog facility to log to.  This requires        Log the hostname in the log file.
        a 4.3BSD or later version of syslog.  You can still set        Sudoers option: log_host
        this for ancient syslogs but it will have no effect.  The 
        following facilities are supported: authpriv (if your OS 
        supports it), auth, daemon, user, local0, local1, local2, 
        local3, local4, local5, local6, and local7. 
   
  --with-goodpri=PRIORITY  --enable-noargs-shell
        Determines which syslog priority to log successfully        If sudo is invoked with no arguments it acts as if the "-s" flag had
        authenticated commands.  The following priorities are        been given.  That is, it runs a shell as root (the shell is determined
        supported: alert, crit, debug, emerg, err, info, notice,        by the SHELL environment variable, falling back on the shell listed
        and warning.        in the invoking user's /etc/passwd entry).
         Sudoers option: shell_noargs
   
     --enable-shell-sets-home
           If sudo is invoked with the "-s" flag the HOME environment variable
           will be set to the home directory of the target user (which is root
           unless the "-u" option is used).  This option effectively makes the
           "-s" flag imply "-H".
           Sudoers option: set_home
   
     --with-all-insults
           Include all the insult sets listed below.  You must either specify
           --with-insults or enable insults in the sudoers file for this to
           have any effect.
   
     --with-askpass=PATH
           Set PATH as the "askpass" program to use when no tty is
           available.  Typically, this is a graphical password prompter,
           similar to the one used by ssh.  The program must take a
           prompt as an argument and print the received password to
           the standard output.  This value may overridden at run-time
           in the sudo.conf file.
   
     --with-badpass-message="BAD PASSWORD MESSAGE"
           Message that is displayed if a user enters an incorrect password.
           The default is "Sorry, try again." unless insults are turned on.
           Sudoers option: badpass_message
   
   --with-badpri=PRIORITY    --with-badpri=PRIORITY
         Determines which syslog priority to log unauthenticated          Determines which syslog priority to log unauthenticated
         commands and errors.  The following priorities are supported:          commands and errors.  The following priorities are supported:
         alert, crit, debug, emerg, err, info, notice, and warning.          alert, crit, debug, emerg, err, info, notice, and warning.
           Sudoers option: syslog_badpri
   
  --with-logpath=PATH  --with-classic-insults
        Override the default location of the sudo log file and use        Uses insults from sudo "classic."  If you just specify --with-insults
        "path" instead.  By default will use /var/log/sudo.log if        you will get the classic and CSOps insults.  This is on by default if
        there is a /var/log dir, falling back to /var/adm/sudo.log        --with-insults is given.
        or /usr/adm/sudo.log if not. 
   
  --with-loglen=NUMBER  --with-csops-insults
        Number of characters per line for the file log.  This is only used if        Insults the user with an extra set of insults (some quotes, some
        you are to "file" or "both".  This value is used to decide when to wrap        original) from a sysadmin group at CU (CSOps).  You must specify
        lines for nicer log files.  The default is 80.  Setting this to 0        --with-insults as well for this to have any effect.  This is on by
        will disable the wrapping.        default if --with-insults is given.
   
  --with-ignore-dot  --with-editor=PATH
        If set, sudo will ignore '.' or '' (current dir) in $PATH.        Specify the default editor path for use by visudo.  This may be a
        The $PATH itself is not modified.        single path name or a colon-separated list of editors.  In the latter
         case, visudo will choose the editor that matches the user's VISUAL
         or EDITOR environment variables or the first editor in the list that
         exists.  The default is the path to vi on your system.
         Sudoers option: editor
   
  --with-mailto=USER|MAIL_ALIAS  --with-env-editor
        User (or mail alias) that mail from sudo is sent to.        Makes visudo consult the VISUAL and EDITOR environment variables before
        This should go to a sysadmin at your site.  The default is "root".        falling back on the default editor list (as specified by --with-editor).
         Note that this may create a security hole as it allows the user to
         run any arbitrary command as root without logging.  A safer alternative
         is to use a colon-separated list of editors with the --with-editor
         option.  visudo will then only use the VISUAL or EDITOR variables
         if they match a value specified via --with-editor.
         Sudoers option: env_editor
   
  --with-mailsubject="SUBJECT OF MAIL"  --with-exempt=GROUP
        Subject of the mail sent to the "mailto" user. The token "%h"        Users in the specified group don't need to enter a password when
        will expand to the hostname of the machine.        running sudo.  This may be useful for sites that don't want their
        Default is "*** SECURITY information for %h ***".        "core" sysadmins to have to enter a password but where Jr. sysadmins
         need to.  You should probably use NOPASSWD in sudoers instead.
         Sudoers option: exempt_group
   
   --without-mail-if-no-user  
         Normally, sudo will mail to the "alertmail" user if the user invoking  
         sudo is not in the sudoers file.  This option disables that behavior.  
   
   --with-mail-if-no-host  
         Send mail to the "alermail" user if the user exists in the sudoers  
         file, but is not allowed to run commands on the current host.  
   
   --with-mail-if-noperms  
         Send mail to the "alermail" user if the user is allowed to use sudo but  
         the command they are trying is not listed in their sudoers file entry.  
   
   --with-passprompt="PASSWORD PROMPT"  
         Default prompt to use when asking for a password; can be overridden  
         via the -p option and the SUDO_PROMPT environment variable. Supports  
         the "%H", "%h", "%U" and "%u" escapes as documented in the sudo  
         manual page.  The default value is "Password:".  
   
   --with-badpass-message="BAD PASSWORD MESSAGE"  
         Message that is displayed if a user enters an incorrect password.  
         The default is "Sorry, try again." unless insults are turned on.  
   
   --with-fqdn    --with-fqdn
        Define this if you want to put fully qualified hostnames in the sudoers        Define this if you want to put fully qualified host names in the sudoers
         file.  Ie: instead of myhost you would use myhost.mydomain.edu.  You may          file.  Ie: instead of myhost you would use myhost.mydomain.edu.  You may
         still use the short form if you wish (and even mix the two).  Beware          still use the short form if you wish (and even mix the two).  Beware
         that turning FQDN on requires sudo to make DNS lookups which may make          that turning FQDN on requires sudo to make DNS lookups which may make
Line 441  The following options are also configurable at runtime Line 606  The following options are also configurable at runtime
         use the host's official name as DNS knows it.  That is, you may not use          use the host's official name as DNS knows it.  That is, you may not use
         a host alias (CNAME entry) due to performance issues and the fact that          a host alias (CNAME entry) due to performance issues and the fact that
         there is no way to get all aliases from DNS.          there is no way to get all aliases from DNS.
           Sudoers option: fqdn
   
  --with-timedir=PATH  --with-goodpri=PRIORITY
        Override the default location of the sudo timestamp directory and        Determines which syslog priority to log successfully
        use "path" instead.        authenticated commands.  The following priorities are
         supported: alert, crit, debug, emerg, err, info, notice,
         and warning.
         Sudoers option: syslog_goodpri
   
  --with-sendmail=PATH  --with-goons-insults
        Override configure's guess as to the location of sendmail.        Insults the user with lines from the "Goon Show" when an incorrect
         password is entered.  You must either specify --with-insults or
         enable insults in the sudoers file for this to have any effect.
   
  --without-sendmail  --with-hal-insults
        Do not use sendmail to mail messages to the "mailto" user.        Uses 2001-like insults when an incorrect password is entered.
        Use only if don't run sendmail or the equivalent.        You must either specify --with-insults or enable insults in the
         sudoers file for this to have any effect.
   
  --with-umask=MASK  --with-ignore-dot
        Umask to use when running the root command.  The default is 0022.        If set, sudo will ignore '.' or '' (current dir) in $PATH.
         The $PATH itself is not modified.
         Sudoers option: ignore_dot
   
  --without-umask  --with-insults
        Preserves the umask of the user invoking sudo.        Define this if you want to be insulted for typing an incorrect password
         just like the original sudo(8).  This is off by default.
         Sudoers option: insults
   
  --with-umask-override  --with-insults=disabled
        Use the umask specified in sudoers even if it is less restrictive        Include support for insults but disable them unless explicitly
        than the user's.  The default is to use the intersection of the        enabled in sudoers.
        user's umask and the umask specified in sudoers.        Sudoers option: !insults
   
  --with-runas-default=USER  --with-iologdir[=DIR]
        The default user to run commands as if the -u flag is not specified        By default, sudo stores I/O log files in either /var/log/sudo-io,
        on the command line.  This defaults to "root".        /var/adm/sudo-io, or /usr/log/sudo-io.  If this option is
         specified, I/O logs will be stored in the indicated directory
         instead.
         Sudoers option: iolog_dir
   
  --with-exempt=GROUP  --with-lecture=no, --without-lecture
        Users in the specified group don't need to enter a password when        Don't print the lecture the first time a user runs sudo.
        running sudo.  This may be useful for sites that don't want their        Sudoers option: !lecture
        "core" sysadmins to have to enter a password but where Jr. sysadmins 
        need to.  You should probably use NOPASSWD in sudoers instead. 
   
  --with-passwd-tries=NUMBER  --with-logfac=FACILITY
        Number of tries a user gets to enter his/her password before sudo logs        Determines which syslog facility to log to.  This requires
        the failure and exits.  The default is 3.        a 4.3BSD or later version of syslog.  You can still set
         this for ancient syslogs but it will have no effect.  The
         following facilities are supported: authpriv (if your OS
         supports it), auth, daemon, user, local0, local1, local2,
         local3, local4, local5, local6, and local7.
         Sudoers option: syslog
   
  --with-timeout=NUMBER  --with-logging=TYPE
        Number of minutes that can elapse before sudo will ask for a passwd        How you want to do your logging.  You may choose "syslog",
        again.  The default is 5, set this to 0 to always prompt for a password.        "file", or "both".  Setting this to "syslog" is nice because
         you can keep all of your sudo logs in one place (see the
         sample.syslog.conf file).  The default is "syslog".
         Sudoers options: syslog and logfile
   
  --with-password-timeout=NUMBER  --with-loglen=NUMBER
        Number of minutes before the sudo password prompt times out.        Number of characters per line for the file log.  This is only used if
        The default is 5, set this to 0 for no password timeout.        you are to "file" or "both".  This value is used to decide when to wrap
         lines for nicer log files.  The default is 80.  Setting this to 0
         will disable the wrapping.
         Sudoers options: loglinelen
   
  --without-tty-tickets  --with-logpath=PATH
        By default, sudo uses a different ticket file for each user/tty combo.        Override the default location of the sudo log file and use
        With this option disabled, a single ticket will be used for all        "path" instead.  By default will use /var/log/sudo.log if
        of a user's login sessions.        there is a /var/log dir, falling back to /var/adm/sudo.log
         or /usr/adm/sudo.log if not.
         Sudoers option: logfile
   
  --with-insults  --with-long-otp-prompt
        Define this if you want to be insulted for typing an incorrect password        When validating with a One Time Password scheme (S/Key or
        just like the original sudo(8).  This is off by default.        OPIE), a two-line prompt is used to make it easier to cut
         and paste the challenge to a local window.  It's not as
         pretty as the default but some people find it more convenient.
         Sudoers option: long_otp_prompt
   
  --with-insults=disabled  --with-mail-if-no-user=no, --without-mail-if-no-user
        Include support for insults but disable them unless explicitly        Normally, sudo will mail to the "alertmail" user if the user invoking
        enabled in sudoers.        sudo is not in the sudoers file.  This option disables that behavior.
         Sudoers option: mail_no_user
   
  --with-all-insults  --with-mail-if-no-host
        Include all the insult sets listed below.  You must either specify        Send mail to the "alermail" user if the user exists in the sudoers
        --with-insults or enable insults in the sudoers file for this to        file, but is not allowed to run commands on the current host.
        have any effect.        Sudoers option: mail_no_host
   
  --with-classic-insults  --with-mail-if-noperms
        Uses insults from sudo "classic."  If you just specify --with-insults        Send mail to the "alermail" user if the user is allowed to use sudo but
        you will get the classic and CSOps insults.  This is on by default if        the command they are trying is not listed in their sudoers file entry.
        --with-insults is given.        Sudoers option: mail_no_perms
   
  --with-csops-insults  --with-mailsubject="SUBJECT OF MAIL"
        Insults the user with an extra set of insults (some quotes, some        Subject of the mail sent to the "mailto" user. The token "%h"
        original) from a sysadmin group at CU (CSOps).  You must specify        will expand to the hostname of the machine.
        --with-insults as well for this to have any effect.  This is on by        Default is "*** SECURITY information for %h ***".
        default if --with-insults is given.        Sudoers option: mailsub
   
  --with-hal-insults  --with-mailto=USER|MAIL_ALIAS
        Uses 2001-like insults when an incorrect password is entered.        User (or mail alias) that mail from sudo is sent to.
        You must either specify --with-insults or enable insults in the        This should go to a sysadmin at your site.  The default is "root".
        sudoers file for this to have any effect.        Sudoers option: mailto
   
  --with-goons-insults  --with-passprompt="PASSWORD PROMPT"
        Insults the user with lines from the "Goon Show" when an incorrect        Default prompt to use when asking for a password; can be overridden
        password is entered.  You must either specify --with-insults or        via the -p option and the SUDO_PROMPT environment variable. Supports
        enable insults in the sudoers file for this to have any effect.        the "%H", "%h", "%U" and "%u" escapes as documented in the sudo
         manual page.  The default value is "Password:".
         Sudoers option: passprompt
   
     --with-password-timeout=NUMBER
           Number of minutes before the sudo password prompt times out.
           The default is 5, set this to 0 for no password timeout.
           Sudoers option: passwd_timeout
   
     --with-passwd-tries=NUMBER
           Number of tries a user gets to enter his/her password before sudo logs
           the failure and exits.  The default is 3.
           Sudoers option: passwd_tries
   
   --with-pc-insults    --with-pc-insults
         Replace politically incorrect insults with less objectionable ones.          Replace politically incorrect insults with less objectionable ones.
   
     --with-runas-default=USER
           The default user to run commands as if the -u flag is not specified
           on the command line.  This defaults to "root".
           Sudoers option: runas_default
   
   --with-secure-path[=PATH]    --with-secure-path[=PATH]
         Path used for every command run from sudo(8).  If you don't trust the          Path used for every command run from sudo(8).  If you don't trust the
         people running sudo to have a sane PATH environment variable you may          people running sudo to have a sane PATH environment variable you may
Line 536  The following options are also configurable at runtime Line 747  The following options are also configurable at runtime
         for your site.  NOTE: this is not applied to users in the group          for your site.  NOTE: this is not applied to users in the group
         specified by --with-exemptgroup.  If you do not specify a path,          specified by --with-exemptgroup.  If you do not specify a path,
         "/bin:/usr/ucb:/usr/bin:/usr/sbin:/sbin:/usr/etc:/etc" is used.          "/bin:/usr/ucb:/usr/bin:/usr/sbin:/sbin:/usr/etc:/etc" is used.
           Sudoers option: secure_path
   
  --without-lecture  --with-sendmail=PATH
        Don't print the lecture the first time a user runs sudo.        Override configure's guess as to the location of sendmail.
         Sudoers option: mailerpath
   
  --with-editor=PATH  --with-sendmail=no, --without-sendmail
        Specify the default editor path for use by visudo.  This may be a        Do not use sendmail to mail messages to the "mailto" user.
        single path name or a colon-separated list of editors.  In the latter        Use only if you don't run sendmail or the equivalent.
        case, visudo will choose the editor that matches the user's VISUAL        Sudoers options: !mailerpath or !mailto
        or EDITOR environment variables or the first editor in the list that 
        exists.  The default is the path to vi on your system. 
   
  --with-env-editor  --with-sudoers-mode=MODE
        Makes visudo consult the VISUAL and EDITOR environment variables before        File mode for the sudoers file (octal).  Note that if you
        falling back on the default editor list (as specified by --with-editor).        wish to NFS-mount the sudoers file this must be group
        Note that this may create a security hole as it allows the user to        readable.  This value may overridden at run-time in the
        run any arbitrary command as root without logging.  A safer alternative        sudo.conf file.  The default mode is 0440.
        is to use a colon-separated list of editors with the --with-editor 
        option.  visudo will then only use the VISUAL or EDITOR variables 
        if they match a value specified via --with-editor. 
   
  --with-askpass=PATH  --with-sudoers-uid=UID
        Set PATH as the "askpass" program to use when no tty is        User id that "owns" the sudoers file.  Note that this is
        available.  Typically, this is a graphical password prompter,        the numeric id, *not* the symbolic name.  This value may
        similar to the one used by ssh.  The program must take a        overridden at run-time in the sudo.conf file.  The default
        prompt as an argument and print the received password to        is 0.
        the standard output. 
   
  --with-iologdir[=DIR]  --with-sudoers-gid=GID
        By default, sudo stores I/O log files in either /var/log/sudo-io,        Group id that "owns" the sudoers file.  Note that this is
        /var/adm/sudo-io, or /usr/log/sudo-io.  If this option is        the numeric id, *not* the symbolic name.  This value may
        specified, I/O logs will be stored in the indicated directory        overridden at run-time in the sudo.conf file.  The default
        instead.        is 0.
   
  --disable-authentication  --with-timeout=NUMBER
        By default, sudo requires the user to authenticate via a        Number of minutes that can elapse before sudo will ask for a passwd
        password or similar means.  This options causes sudo to        again.  The default is 5, set this to 0 to always prompt for a password.
        *not* require authentication.  It is possible to turn        Sudoers option: timestamp_timeout
        authentication back on in sudoers via the PASSWD attribute. 
   
  --disable-root-sudo  --with-tty-tickets=no, --without-tty-tickets
        Don't let root run sudo.  This can be used to prevent people from        By default, sudo uses a different ticket file for each user/tty combo.
        "chaining" sudo commands to get a root shell by doing something        With this option disabled, a single ticket will be used for all
        like "sudo sudo /bin/sh".        of a user's login sessions.
         Sudoers option: tty_tickets
   
  --enable-gss-krb5-ccache-name  --with-umask=MASK
        Use the gss_krb5_ccache_name() function to set the Kerberos        Umask to use when running the root command.  The default is 0022.
        V credential cache file name.  By default, sudo will use        Sudoers option: umask
        the KRB5CCNAME environment variable to set this.  While 
        gss_krb5_ccache_name() provides a better API to do this it 
        is not supported by all Kerberos V and SASL combinations. 
   
  --enable-log-host  --with-umask=no, --without-umask
        Log the hostname in the log file.        Preserves the umask of the user invoking sudo.
         Sudoers option: !umask
   
  --enable-noargs-shell  --with-umask-override
        If sudo is invoked with no arguments it acts as if the "-s" flag had        Use the umask specified in sudoers even if it is less restrictive
        been given.  That is, it runs a shell as root (the shell is determined        than the user's.  The default is to use the intersection of the
        by the SHELL environment variable, falling back on the shell listed        user's umask and the umask specified in sudoers.
        in the invoking user's /etc/passwd entry).        Sudoers option: umask_override
   
  --enable-shell-sets-homeOS dependent notes
        If sudo is invoked with the "-s" flag the HOME environment variable==================
        will be set to the home directory of the target user (which is root 
        unless the "-u" option is used).  This option effectively makes the 
        "-s" flag imply "-H". 
   
  --disable-path-infoHP-UX:
        Normally, sudo will tell the user when a command could not be found    The default C compiler shipped with HP-UX is not an ANSI compiler.
        in their $PATH.  Some sites may wish to disable this as it could    You must use either the HP ANSI C compiler or gcc to build sudo.
        be used to gather information on the location of executables that    Binary packages of gcc are available from http://hpux.connect.org.uk/.
        the normal user does not have access to.  The disadvantage is that 
        if the executable is simply not in the user's path, sudo will tell 
        the user that they are not allowed to run it, which can be confusing. 
   
  --enable-zlib[=location]    To prevent PAM from overriding the value of umask on HP-UX 11,
        Enable the use of the zlib compress library when storing    you will need to add a line like the following to /etc/pam.conf:
        I/O log files.  If specified, location is the base directory 
        containing the zlib include and lib directories.  The special 
        values "system" and "builtin" can be used to indicate that 
        the system version of zlib should be used or that the version 
        of zlib shipped with sudo should be used instead. 
        If this option is not specified, configure will use the 
        system zlib if it is present. 
   
  --disable-zlib    sudo        session required        libpam_hpsec.so.1 bypass_umask
        Disable the use of the zlib compress library when storing 
        I/O log files. 
   
  --enable-warnings    If every command run via sudo displays information about the last
        Enable compiler warnings when building sudo with gcc.    successful login and the last authentication failure you should
     make use an /etc/pam.conf line like:
   
  --enable-werror    sudo        session required        libpam_hpsec.so.1 bypass_umask bypass_last_login
        Enable the -Werror compiler option when building sudo with gcc. 
   
   --enable-admin-flag  
         Enable the creation of an Ubuntu-style admin flag file  
         the first time sudo is run.  
   
   --disable-env-reset  
         Disable environment resetting.  This sets the default value  
         of the "env_reset" Defaults option in sudoers to false.  
   
   --enable-nls[=location]  
         Enable natural language support using the gettext() family  
         of functions.  If specified, location is the base directory  
         containing the libintl include and lib directories.  If  
         this option is not specified, configure will look for the  
         gettext() family of functions in the standard C library  
         first, then check for a standalone libintl (linking with  
         libiconv as needed).  
   
   --disable-nls  
         Disable natural language support.  By default, sudo will  
         use the gettext() family of functions, if available, to  
         implement messages in the invoking user's native language.  
         Note that translations do not exist for all languages.  
   
 Shadow password and C2 support  
 ==============================  
   
 Shadow passwords (also included with most C2 security packages) are  
 supported on most major platforms for which they exist.  The  
 `configure' script will attempt to determine if your system can use  
 shadow passwords and include support for them if so.  Shadow password  
 support is now compiled in by default (it doesn't hurt anything if you  
 don't have them configured).  To disable the shadow password support,  
 use the --disable-shadow option to configure.  
   
 Shadow passwords are known to work on the following platforms:  
   
     SunOS 4.x  
     Solaris 2.x  
     HP-UX >= 9.x  
     Ultrix 4.x  
     Digital UNIX  
     IRIX >= 5.x  
     AIX >= 3.2.x  
     Linux  
     SCO >= 3.2.2  
     Pyramid DC/OSx  
     UnixWare  
     SVR4 (and variants using standard SVR4 shadow passwords)  
     4.4BSD based systems (including OpenBSD, NetBSD, FreeBSD, and Mac OS X)  
     Systems using SecureWare's C2 security.  
   
 OS dependent notes  
 ==================  
   
 Linux:  Linux:
     PAM and LDAP headers are not installed by default on most Linux      PAM and LDAP headers are not installed by default on most Linux
     systems.  You will need to install the "pam-dev" package if      systems.  You will need to install the "pam-dev" package if
Line 691  Linux: Line 827  Linux:
     If you wish to build with LDAP support you will also need the      If you wish to build with LDAP support you will also need the
     openldap-devel package.      openldap-devel package.
   
     Versions of glibc 2.x previous to 2.0.7 have a broken lsearch().  
     You will need to either upgrade to glibc-2.0.7 or use sudo's  
     version of lsearch().  To use sudo's lsearch(), comment out  
     the "#define HAVE_LSEARCH 1" line in config.h and add lsearch.o  
     to the LIBOBJS line in the Makefile.  
   
     If you are using a Linux kernel older than 2.4 it is not possible  
     to access the sudoers file via NFS.  This is due to a bug in  
     the Linux client-side NFS implementation that has since been  
     fixed.  There is a workaround on the sudo ftp site, linux_nfs.patch,  
     if you need to NFS-mount sudoers on older Linux kernels.  
   
 Solaris 2.x:  
     You need to have a C compiler in order to build sudo.  Since  
     Solaris 2.x does not come with one by default this means that  
     you either need to install the Sun Studio compiler suite,  
     available for free from www.sun.com, or have a copy of the GNU  
     C compiler (gcc) which is distributed on the Solaris Companion  
     CD.  You can also get them from various places on the net,  
     including http://www.sunfreeware.com/  
     NOTE: sudo will *not* build with the sun C compiler in BSD  
           compatibility mode (/usr/ucb/cc).  Sudo is designed to  
           compile with the standard C compiler (or gcc) and will  
           not build correctly with /usr/ucb/cc.  You can set the  
           CC environment variable to the non-ucb compiler when  
           running `configure' if it is not the first cc in your  
           path.  Some sites link /usr/ucb/cc to gcc; configure will  
           not notice this and still refuse to use /usr/ucb/cc, so  
           make sure gcc is also in your path if your site is setup  
           this way.  
     Also: Older versions of Solaris come with a broken syslogd.  
           If you have having problems with sudo logging you should  
           make sure you have the latest syslogd patch installed.  
           This is a problem for Solaris 2.4 and 2.5 at least.  
   
 Mac OS X:  Mac OS X:
     The pseudo-tty support in the Mac OS X kernel has bugs related      The pseudo-tty support in the Mac OS X kernel has bugs related
     to its handling of the SIGTSTP, SIGTTIN and SIGTTOU signals.      to its handling of the SIGTSTP, SIGTTIN and SIGTTOU signals.
Line 734  Mac OS X: Line 835  Mac OS X:
     logging is enabled.  The issue has been reported to Apple and      logging is enabled.  The issue has been reported to Apple and
     is bug id #7952709.      is bug id #7952709.
   
HP-UX:Solaris:
    The default C compiler shipped with HP-UX is not an ANSI compiler.    You need to have a C compiler in order to build sudo.  Since
    You must use either the HP ANSI C compiler or gcc to build sudo.    Solaris does not come with one by default this means that you
    Binary packages of gcc are available from http://hpux.connect.org.uk/.    either need to either install the Solaris Studio compiler suite,
     available for free from www.oracle.com, or install the GNU C
     compiler (gcc) which is can be installed via the pkg utility
     on Solaris 11 and higher and is distributed on the Solaris
     Companion CD for older Solaris releases.  You can also download
     gcc packages from http://www.opencsw.org/packages/CSWgcc4core/
   
     To prevent PAM from overriding the value of umask on HP-UX 11,  
     you will need to add a line like the following to /etc/pam.conf:  
   
     sudo        session required        libpam_hpsec.so.1 bypass_umask  
   
 Digital UNIX:  
     By default, sudo will use SIA (Security Integration Architecture)  
     to validate a user.  If you want to use an alternative authentication  
     method that does not go through SIA, you need to use the  
     --disable-sia option to configure.  If you use gcc to compile  
     you will get warnings when building interfaces.c.  These are  
     harmless but if they really bug you, you can edit  
     /usr/include/net/if.h around line 123, right after the comment:  
         /* forward decls for C++ */  
     change the line:  
         #ifdef __cplusplus  
     to:  
         #if defined(__cplusplus) || defined(__GNUC__)  
     If you don't like the idea of editing the system header file  
     you can just make a copy in gcc's private include tree and  
     edit that.  
   
 AIX 3.2.x:  
     I've had various problems with the AIX C compiler producing  
     incorrect code when the -O flag was used.  When optimization  
     is not used, the problems go away.  Gcc does not appear  
     to have this problem.  
   
 SCO ODT:  
     You'll probably need libcrypt_i.a available via anonymous ftp  
     from sosco.sco.com.  The necessary files are /SLS/lng225b.Z  
     and /SLS/lng225b.ltr.Z.  
   
 SunOS 4.x:  SunOS 4.x:
     SunOS does not ship with an ANSI C compiler.  You will need to      SunOS does not ship with an ANSI C compiler.  You will need to
     install an ANSI compiler such as gcc to build sudo.      install an ANSI compiler such as gcc to build sudo.
   
     The /bin/sh shipped with SunOS blows up while running configure.      The /bin/sh shipped with SunOS blows up while running configure.
     You can work around this by installing bash or zsh.  If you      You can work around this by installing bash or zsh.  If you
    have bash or zsh in your path, configure will use it instead    have bash or zsh in your path, configure will use it automatically.
    automatically. 
 
ULTRIX 4.x: 
    ULTRIX does not ship with an ANSI C compiler.  You will need to 
    install an ANSI compiler such as gcc to build sudo. 
 
    The /bin/sh shipped with ULTRIX blows up while running configure. 
    You can work around this by installing bash or zsh.  If you 
    have bash or zsh in your path, configure will use it instead 
    automatically. 
 
    ULTRIX ships with the 4.2BSD syslog(3) which does not 
    allow things like logging different facilities to different 
    files, redirecting logs to a single loghost and other niceties. 
    You may want to just grab and install: 
        ftp://www.sudo.ws/pub/sudo/misc/jtkohl-syslog-complete.tar.gz 
    (available via anonymous ftp) which is a port if the 4.3BSD 
    syslog/syslogd that is backwards compatible with the Ultrix version. 
    I recommend it highly.  If you do not do this you probably want 
    to run configure with --with-logging=file 

Removed from v.1.1.1.1  
changed lines
  Added in v.1.1.1.5


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>