SUDO_PLUGIN(1m) MAINTENANCE COMMANDS SUDO_PLUGIN(1m)
NNAAMMEE
sudo_plugin - Sudo Plugin API
DDEESSCCRRIIPPTTIIOONN
Starting with version 1.8, ssuuddoo supports a plugin API for policy and
session logging. By default, the _s_u_d_o_e_r_s policy plugin and an
associated I/O logging plugin are used. Via the plugin API, ssuuddoo can
be configured to use alternate policy and/or I/O logging plugins
provided by third parties. The plugins to be used are specified via
the _/_e_t_c_/_s_u_d_o_._c_o_n_f file.
The API is versioned with a major and minor number. The minor version
number is incremented when additions are made. The major number is
incremented when incompatible changes are made. A plugin should be
check the version passed to it and make sure that the major version
matches.
The plugin API is defined by the sudo_plugin.h header file.
TThhee ssuuddoo..ccoonnff FFiillee
The _/_e_t_c_/_s_u_d_o_._c_o_n_f file contains plugin configuration directives.
Currently, the only supported keyword is the Plugin directive, which
causes a plugin plugin to be loaded.
A Plugin line consists of the Plugin keyword, followed by the
_s_y_m_b_o_l___n_a_m_e and the _p_a_t_h to the shared object containing the plugin.
The _s_y_m_b_o_l___n_a_m_e is the name of the struct policy_plugin or struct
io_plugin in the plugin shared object. The _p_a_t_h may be fully qualified
or relative. If not fully qualified it is relative to the
_/_u_s_r_/_l_o_c_a_l_/_l_i_b_e_x_e_c directory. Any additional parameters after the _p_a_t_h
are passed as options to the plugin's _o_p_e_n function. Lines that don't
begin with Plugin, Path, Debug or Set are silently ignored.
The same shared object may contain multiple plugins, each with a
different symbol name. The shared object file must be owned by uid 0
and only writable by its owner. Because of ambiguities that arise from
composite policies, only a single policy plugin may be specified. This
limitation does not apply to I/O plugins.
#
# Default /etc/sudo.conf file
#
# Format:
# Plugin plugin_name plugin_path plugin_options ...
# Path askpass /path/to/askpass
# Path noexec /path/to/sudo_noexec.so
# Debug sudo /var/log/sudo_debug all@warn
# Set disable_coredump true
#
# The plugin_path is relative to /usr/local/libexec unless
# fully qualified.
# The plugin_name corresponds to a global symbol in the plugin
# that contains the plugin interface structure.
# The plugin_options are optional.
#
Plugin sudoers_policy sudoers.so
Plugin sudoers_io sudoers.so
PPoolliiccyy PPlluuggiinn AAPPII
A policy plugin must declare and populate a policy_plugin struct in the
global scope. This structure contains pointers to the functions that
implement the ssuuddoo policy checks. The name of the symbol should be
specified in _/_e_t_c_/_s_u_d_o_._c_o_n_f along with a path to the plugin so that
ssuuddoo can load it.
struct policy_plugin {
#define SUDO_POLICY_PLUGIN 1
unsigned int type; /* always SUDO_POLICY_PLUGIN */
unsigned int version; /* always SUDO_API_VERSION */
int (*open)(unsigned int version, sudo_conv_t conversation,
sudo_printf_t plugin_printf, char * const settings[],
char * const user_info[], char * const user_env[],
char * const plugin_options[]);
void (*close)(int exit_status, int error);
int (*show_version)(int verbose);
int (*check_policy)(int argc, char * const argv[],
char *env_add[], char **command_info[],
char **argv_out[], char **user_env_out[]);
int (*list)(int argc, char * const argv[], int verbose,
const char *list_user);
int (*validate)(void);
void (*invalidate)(int remove);
int (*init_session)(struct passwd *pwd, char **user_env[]);
void (*register_hooks)(int version,
int (*register_hook)(struct sudo_hook *hook));
void (*deregister_hooks)(int version,
int (*deregister_hook)(struct sudo_hook *hook));
};
The policy_plugin struct has the following fields:
type
The type field should always be set to SUDO_POLICY_PLUGIN.
version
The version field should be set to SUDO_API_VERSION.
This allows ssuuddoo to determine the API version the plugin was built
against.
open
int (*open)(unsigned int version, sudo_conv_t conversation,
sudo_printf_t plugin_printf, char * const settings[],
char * const user_info[], char * const user_env[],
char * const plugin_options[]);
Returns 1 on success, 0 on failure, -1 if a general error occurred,
or -2 if there was a usage error. In the latter case, ssuuddoo will
print a usage message before it exits. If an error occurs, the
plugin may optionally call the conversation or plugin_printf
function with SUDO_CONF_ERROR_MSG to present additional error
information to the user.
The function arguments are as follows:
version
The version passed in by ssuuddoo allows the plugin to determine
the major and minor version number of the plugin API supported
by ssuuddoo.
conversation
A pointer to the conversation function that can be used by the
plugin to interact with the user (see below). Returns 0 on
success and -1 on failure.
plugin_printf
A pointer to a printf-style function that may be used to
display informational or error messages (see below). Returns
the number of characters printed on success and -1 on failure.
settings
A vector of user-supplied ssuuddoo settings in the form of
"name=value" strings. The vector is terminated by a NULL
pointer. These settings correspond to flags the user specified
when running ssuuddoo. As such, they will only be present when the
corresponding flag has been specified on the command line.
When parsing _s_e_t_t_i_n_g_s, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
debug_flags=string
A comma-separated list of debug flags that correspond to
ssuuddoo's Debug entry in _/_e_t_c_/_s_u_d_o_._c_o_n_f, if there is one. The
flags are passed to the plugin as they appear in
_/_e_t_c_/_s_u_d_o_._c_o_n_f. The syntax used by ssuuddoo and the _s_u_d_o_e_r_s
plugin is _s_u_b_s_y_s_t_e_m@_p_r_i_o_r_i_t_y but the plugin is free to use
a different format so long as it does not include a command
,.
For reference, the priorities supported by the ssuuddoo front
end and _s_u_d_o_e_r_s are: _c_r_i_t, _e_r_r, _w_a_r_n, _n_o_t_i_c_e, _d_i_a_g, _i_n_f_o,
_t_r_a_c_e and _d_e_b_u_g.
The following subsystems are defined: _m_a_i_n, _m_e_m_o_r_y, _a_r_g_s,
_e_x_e_c, _p_t_y, _u_t_m_p, _c_o_n_v, _p_c_o_m_m, _u_t_i_l, _l_i_s_t, _n_e_t_i_f, _a_u_d_i_t,
_e_d_i_t, _s_e_l_i_n_u_x, _l_d_a_p, _m_a_t_c_h, _p_a_r_s_e_r, _a_l_i_a_s, _d_e_f_a_u_l_t_s, _a_u_t_h,
_e_n_v, _l_o_g_g_i_n_g, _n_s_s, _r_b_t_r_e_e, _p_e_r_m_s, _p_l_u_g_i_n. The subsystem
_a_l_l includes every subsystem.
There is not currently a way to specify a set of debug
flags specific to the plugin--the flags are shared by ssuuddoo
and the plugin.
debug_level=number
This setting has been deprecated in favor of _d_e_b_u_g___f_l_a_g_s.
runas_user=string
The user name or uid to to run the command as, if specified
via the -u flag.
runas_group=string
The group name or gid to to run the command as, if
specified via the -g flag.
prompt=string
The prompt to use when requesting a password, if specified
via the -p flag.
set_home=bool
Set to true if the user specified the -H flag. If true,
set the HOME environment variable to the target user's home
directory.
preserve_environment=bool
Set to true if the user specified the -E flag, indicating
that the user wishes to preserve the environment.
run_shell=bool
Set to true if the user specified the -s flag, indicating
that the user wishes to run a shell.
login_shell=bool
Set to true if the user specified the -i flag, indicating
that the user wishes to run a login shell.
implied_shell=bool
If the user does not specify a program on the command line,
ssuuddoo will pass the plugin the path to the user's shell and
set _i_m_p_l_i_e_d___s_h_e_l_l to true. This allows ssuuddoo with no
arguments to be used similarly to _s_u(1). If the plugin
does not to support this usage, it may return a value of -2
from the check_policy function, which will cause ssuuddoo to
print a usage message and exit.
preserve_groups=bool
Set to true if the user specified the -P flag, indicating
that the user wishes to preserve the group vector instead
of setting it based on the runas user.
ignore_ticket=bool
Set to true if the user specified the -k flag along with a
command, indicating that the user wishes to ignore any
cached authentication credentials.
noninteractive=bool
Set to true if the user specified the -n flag, indicating
that ssuuddoo should operate in non-interactive mode. The
plugin may reject a command run in non-interactive mode if
user interaction is required.
login_class=string
BSD login class to use when setting resource limits and
nice value, if specified by the -c flag.
selinux_role=string
SELinux role to use when executing the command, if
specified by the -r flag.
selinux_type=string
SELinux type to use when executing the command, if
specified by the -t flag.
bsdauth_type=string
Authentication type, if specified by the -a flag, to use on
systems where BSD authentication is supported.
network_addrs=list
A space-separated list of IP network addresses and netmasks
in the form "addr/netmask", e.g.
"192.168.1.2/255.255.255.0". The address and netmask pairs
may be either IPv4 or IPv6, depending on what the operating
system supports. If the address contains a colon (':'), it
is an IPv6 address, else it is IPv4.
progname=string
The command name that sudo was run as, typically "sudo" or
"sudoedit".
sudoedit=bool
Set to true when the -e flag is is specified or if invoked
as ssuuddooeeddiitt. The plugin shall substitute an editor into
_a_r_g_v in the _c_h_e_c_k___p_o_l_i_c_y function or return -2 with a usage
error if the plugin does not support _s_u_d_o_e_d_i_t. For more
information, see the _c_h_e_c_k___p_o_l_i_c_y section.
closefrom=number
If specified, the user has requested via the -C flag that
ssuuddoo close all files descriptors with a value of _n_u_m_b_e_r or
higher. The plugin may optionally pass this, or another
value, back in the _c_o_m_m_a_n_d___i_n_f_o list.
Additional settings may be added in the future so the plugin
should silently ignore settings that it does not recognize.
user_info
A vector of information about the user running the command in
the form of "name=value" strings. The vector is terminated by
a NULL pointer.
When parsing _u_s_e_r___i_n_f_o, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
pid=int
The process ID of the running ssuuddoo process. Only available
starting with API version 1.2
ppid=int
The parent process ID of the running ssuuddoo process. Only
available starting with API version 1.2
sid=int
The session ID of the running ssuuddoo process or 0 if ssuuddoo is
not part of a POSIX job control session. Only available
starting with API version 1.2
pgid=int
The ID of the process group that the running ssuuddoo process
belongs to. Only available starting with API version 1.2
tcpgid=int
The ID of the forground process group associated with the
terminal device associcated with the ssuuddoo process or -1 if
there is no terminal present. Only available starting with
API version 1.2
user=string
The name of the user invoking ssuuddoo.
euid=uid_t
The effective user ID of the user invoking ssuuddoo.
uid=uid_t
The real user ID of the user invoking ssuuddoo.
egid=gid_t
The effective group ID of the user invoking ssuuddoo.
gid=gid_t
The real group ID of the user invoking ssuuddoo.
groups=list
The user's supplementary group list formatted as a string
of comma-separated group IDs.
cwd=string
The user's current working directory.
tty=string
The path to the user's terminal device. If the user has no
terminal device associated with the session, the value will
be empty, as in tty=.
host=string
The local machine's hostname as returned by the
gethostname() system call.
lines=int
The number of lines the user's terminal supports. If there
is no terminal device available, a default value of 24 is
used.
cols=int
The number of columns the user's terminal supports. If
there is no terminal device available, a default value of
80 is used.
user_env
The user's environment in the form of a NULL-terminated vector
of "name=value" strings.
When parsing _u_s_e_r___e_n_v, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
plugin_options
Any (non-comment) strings immediately after the plugin path are
treated as arguments to the plugin. These arguments are split
on a white space boundary and are passed to the plugin in the
form of a NULL-terminated array of strings. If no arguments
were specified, _p_l_u_g_i_n___o_p_t_i_o_n_s will be the NULL pointer.
NOTE: the _p_l_u_g_i_n___o_p_t_i_o_n_s parameter is only available starting
with API version 1.2. A plugin mmuusstt check the API version
specified by the ssuuddoo front end before using _p_l_u_g_i_n___o_p_t_i_o_n_s.
Failure to do so may result in a crash.
close
void (*close)(int exit_status, int error);
The close function is called when the command being run by ssuuddoo
finishes.
The function arguments are as follows:
exit_status
The command's exit status, as returned by the _w_a_i_t(2) system
call. The value of exit_status is undefined if error is non-
zero.
error
If the command could not be executed, this is set to the value
of errno set by the _e_x_e_c_v_e(2) system call. The plugin is
responsible for displaying error information via the
conversation or plugin_printf function. If the command was
successfully executed, the value of error is 0.
show_version
int (*show_version)(int verbose);
The show_version function is called by ssuuddoo when the user specifies
the -V option. The plugin may display its version information to
the user via the conversation or plugin_printf function using
SUDO_CONV_INFO_MSG. If the user requests detailed version
information, the verbose flag will be set.
check_policy
int (*check_policy)(int argc, char * const argv[]
char *env_add[], char **command_info[],
char **argv_out[], char **user_env_out[]);
The _c_h_e_c_k___p_o_l_i_c_y function is called by ssuuddoo to determine whether
the user is allowed to run the specified commands.
If the _s_u_d_o_e_d_i_t option was enabled in the _s_e_t_t_i_n_g_s array passed to
the _o_p_e_n function, the user has requested _s_u_d_o_e_d_i_t mode. _s_u_d_o_e_d_i_t
is a mechanism for editing one or more files where an editor is run
with the user's credentials instead of with elevated privileges.
ssuuddoo achieves this by creating user-writable temporary copies of
the files to be edited and then overwriting the originals with the
temporary copies after editing is complete. If the plugin supports
ssuuddooeeddiitt, it should choose the editor to be used, potentially from
a variable in the user's environment, such as EDITOR, and include
it in _a_r_g_v___o_u_t (note that environment variables may include command
line flags). The files to be edited should be copied from _a_r_g_v
into _a_r_g_v___o_u_t, separated from the editor and its arguments by a
"--" element. The "--" will be removed by ssuuddoo before the editor
is executed. The plugin should also set _s_u_d_o_e_d_i_t_=_t_r_u_e in the
_c_o_m_m_a_n_d___i_n_f_o list.
The _c_h_e_c_k___p_o_l_i_c_y function returns 1 if the command is allowed, 0 if
not allowed, -1 for a general error, or -2 for a usage error or if
ssuuddooeeddiitt was specified but is unsupported by the plugin. In the
latter case, ssuuddoo will print a usage message before it exits. If
an error occurs, the plugin may optionally call the conversation or
plugin_printf function with SUDO_CONF_ERROR_MSG to present
additional error information to the user.
The function arguments are as follows:
argc
The number of elements in _a_r_g_v, not counting the final NULL
pointer.
argv
The argument vector describing the command the user wishes to
run, in the same form as what would be passed to the _e_x_e_c_v_e_(_)
system call. The vector is terminated by a NULL pointer.
env_add
Additional environment variables specified by the user on the
command line in the form of a NULL-terminated vector of
"name=value" strings. The plugin may reject the command if one
or more variables are not allowed to be set, or it may silently
ignore such variables.
When parsing _e_n_v___a_d_d, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
command_info
Information about the command being run in the form of
"name=value" strings. These values are used by ssuuddoo to set the
execution environment when running a command. The plugin is
responsible for creating and populating the vector, which must
be terminated with a NULL pointer. The following values are
recognized by ssuuddoo:
command=string
Fully qualified path to the command to be executed.
runas_uid=uid
User ID to run the command as.
runas_euid=uid
Effective user ID to run the command as. If not specified,
the value of _r_u_n_a_s___u_i_d is used.
runas_gid=gid
Group ID to run the command as.
runas_egid=gid
Effective group ID to run the command as. If not
specified, the value of _r_u_n_a_s___g_i_d is used.
runas_groups=list
The supplementary group vector to use for the command in
the form of a comma-separated list of group IDs. If
_p_r_e_s_e_r_v_e___g_r_o_u_p_s is set, this option is ignored.
login_class=string
BSD login class to use when setting resource limits and
nice value (optional). This option is only set on systems
that support login classes.
preserve_groups=bool
If set, ssuuddoo will preserve the user's group vector instead
of initializing the group vector based on runas_user.
cwd=string
The current working directory to change to when executing
the command.
noexec=bool
If set, prevent the command from executing other programs.
chroot=string
The root directory to use when running the command.
nice=int
Nice value (priority) to use when executing the command.
The nice value, if specified, overrides the priority
associated with the _l_o_g_i_n___c_l_a_s_s on BSD systems.
umask=octal
The file creation mask to use when executing the command.
selinux_role=string
SELinux role to use when executing the command.
selinux_type=string
SELinux type to use when executing the command.
timeout=int
Command timeout. If non-zero then when the timeout expires
the command will be killed.
sudoedit=bool
Set to true when in _s_u_d_o_e_d_i_t mode. The plugin may enable
_s_u_d_o_e_d_i_t mode even if ssuuddoo was not invoked as ssuuddooeeddiitt.
This allows the plugin to perform command substitution and
transparently enable _s_u_d_o_e_d_i_t when the user attempts to run
an editor.
closefrom=number
If specified, ssuuddoo will close all files descriptors with a
value of _n_u_m_b_e_r or higher.
iolog_compress=bool
Set to true if the I/O logging plugins, if any, should
compress the log data. This is a hint to the I/O logging
plugin which may choose to ignore it.
iolog_path=string
Fully qualified path to the file or directory in which I/O
log is to be stored. This is a hint to the I/O logging
plugin which may choose to ignore it. If no I/O logging
plugin is loaded, this setting has no effect.
iolog_stdin=bool
Set to true if the I/O logging plugins, if any, should log
the standard input if it is not connected to a terminal
device. This is a hint to the I/O logging plugin which may
choose to ignore it.
iolog_stdout=bool
Set to true if the I/O logging plugins, if any, should log
the standard output if it is not connected to a terminal
device. This is a hint to the I/O logging plugin which may
choose to ignore it.
iolog_stderr=bool
Set to true if the I/O logging plugins, if any, should log
the standard error if it is not connected to a terminal
device. This is a hint to the I/O logging plugin which may
choose to ignore it.
iolog_ttyin=bool
Set to true if the I/O logging plugins, if any, should log
all terminal input. This only includes input typed by the
user and not from a pipe or redirected from a file. This
is a hint to the I/O logging plugin which may choose to
ignore it.
iolog_ttyout=bool
Set to true if the I/O logging plugins, if any, should log
all terminal output. This only includes output to the
screen, not output to a pipe or file. This is a hint to
the I/O logging plugin which may choose to ignore it.
use_pty=bool
Allocate a pseudo-tty to run the command in, regardless of
whether or not I/O logging is in use. By default, ssuuddoo
will only run the command in a pty when an I/O log plugin
is loaded.
set_utmp=bool
Create a utmp (or utmpx) entry when a pseudo-tty is
allocated. By default, the new entry will be a copy of the
user's existing utmp entry (if any), with the tty, time,
type and pid fields updated.
utmp_user=string
User name to use when constructing a new utmp (or utmpx)
entry when _s_e_t___u_t_m_p is enabled. This option can be used to
set the user field in the utmp entry to the user the
command runs as rather than the invoking user. If not set,
ssuuddoo will base the new entry on the invoking user's
existing entry.
Unsupported values will be ignored.
argv_out
The NULL-terminated argument vector to pass to the _e_x_e_c_v_e_(_)
system call when executing the command. The plugin is
responsible for allocating and populating the vector.
user_env_out
The NULL-terminated environment vector to use when executing
the command. The plugin is responsible for allocating and
populating the vector.
list
int (*list)(int verbose, const char *list_user,
int argc, char * const argv[]);
List available privileges for the invoking user. Returns 1 on
success, 0 on failure and -1 on error. On error, the plugin may
optionally call the conversation or plugin_printf function with
SUDO_CONF_ERROR_MSG to present additional error information to the
user.
Privileges should be output via the conversation or plugin_printf
function using SUDO_CONV_INFO_MSG.
verbose
Flag indicating whether to list in verbose mode or not.
list_user
The name of a different user to list privileges for if the
policy allows it. If NULL, the plugin should list the
privileges of the invoking user.
argc
The number of elements in _a_r_g_v, not counting the final NULL
pointer.
argv
If non-NULL, an argument vector describing a command the user
wishes to check against the policy in the same form as what
would be passed to the _e_x_e_c_v_e_(_) system call. If the command is
permitted by the policy, the fully-qualified path to the
command should be displayed along with any command line
arguments.
validate
int (*validate)(void);
The validate function is called when ssuuddoo is run with the -v flag.
For policy plugins such as _s_u_d_o_e_r_s that cache authentication
credentials, this function will validate and cache the credentials.
The validate function should be NULL if the plugin does not support
credential caching.
Returns 1 on success, 0 on failure and -1 on error. On error, the
plugin may optionally call the conversation or plugin_printf
function with SUDO_CONF_ERROR_MSG to present additional error
information to the user.
invalidate
void (*invalidate)(int remove);
The invalidate function is called when ssuuddoo is called with the -k
or -K flag. For policy plugins such as _s_u_d_o_e_r_s that cache
authentication credentials, this function will invalidate the
credentials. If the _r_e_m_o_v_e flag is set, the plugin may remove the
credentials instead of simply invalidating them.
The invalidate function should be NULL if the plugin does not
support credential caching.
init_session
int (*init_session)(struct passwd *pwd, char **user_envp[);
The init_session function is called before ssuuddoo sets up the
execution environment for the command. It is run in the parent
ssuuddoo process and before any uid or gid changes. This can be used
to perform session setup that is not supported by _c_o_m_m_a_n_d___i_n_f_o,
such as opening the PAM session. The close function can be used to
tear down the session that was opened by init_session.
The _p_w_d argument points to a passwd struct for the user the command
will be run as if the uid the command will run as was found in the
password database, otherwise it will be NULL.
The _u_s_e_r___e_n_v argument points to the environment the command will
run in, in the form of a NULL-terminated vector of "name=value"
strings. This is the same string passed back to the front end via
the Policy Plugin's _u_s_e_r___e_n_v___o_u_t parameter. If the init_session
function needs to modify the user environment, it should update the
pointer stored in _u_s_e_r___e_n_v. The expected use case is to merge the
contents of the PAM environment (if any) with the contents of
_u_s_e_r___e_n_v. NOTE: the _u_s_e_r___e_n_v parameter is only available starting
with API version 1.2. A plugin mmuusstt check the API version
specified by the ssuuddoo front end before using _u_s_e_r___e_n_v. Failure to
do so may result in a crash.
Returns 1 on success, 0 on failure and -1 on error. On error, the
plugin may optionally call the conversation or plugin_printf
function with SUDO_CONF_ERROR_MSG to present additional error
information to the user.
register_hooks
void (*register_hooks)(int version,
int (*register_hook)(struct sudo_hook *hook));
The register_hooks function is called by the sudo front end to
register any hooks the plugin needs. If the plugin does not
support hooks, register_hooks should be set to the NULL pointer.
The _v_e_r_s_i_o_n argument describes the version of the hooks API
supported by the ssuuddoo front end.
The register_hook function should be used to register any supported
hooks the plugin needs. It returns 0 on success, 1 if the hook
type is not supported and -1 if the major version in struct hook
does not match the front end's major hook API version.
See the "Hook Function API" section below for more information
about hooks.
NOTE: the register_hooks function is only available starting with
API version 1.2. If the ssuuddoo front end doesn't support API version
1.2 or higher, register_hooks will not be called.
deregister_hooks
void (*deregister_hooks)(int version,
int (*deregister_hook)(struct sudo_hook *hook));
The deregister_hooks function is called by the sudo front end to
deregister any hooks the plugin has registered. If the plugin does
not support hooks, deregister_hooks should be set to the NULL
pointer.
The _v_e_r_s_i_o_n argument describes the version of the hooks API
supported by the ssuuddoo front end.
The deregister_hook function should be used to deregister any hooks
that were put in place by the register_hook function. If the
plugin tries to deregister a hook that the front end does not
support, deregister_hook will return an error.
See the "Hook Function API" section below for more information
about hooks.
NOTE: the deregister_hooks function is only available starting with
API version 1.2. If the ssuuddoo front end doesn't support API version
1.2 or higher, deregister_hooks will not be called.
_P_o_l_i_c_y _P_l_u_g_i_n _V_e_r_s_i_o_n _M_a_c_r_o_s
/* Plugin API version major/minor. */
#define SUDO_API_VERSION_MAJOR 1
#define SUDO_API_VERSION_MINOR 2
#define SUDO_API_MKVERSION(x, y) ((x << 16) | y)
#define SUDO_API_VERSION SUDO_API_MKVERSION(SUDO_API_VERSION_MAJOR,\
SUDO_API_VERSION_MINOR)
/* Getters and setters for API version */
#define SUDO_API_VERSION_GET_MAJOR(v) ((v) >> 16)
#define SUDO_API_VERSION_GET_MINOR(v) ((v) & 0xffff)
#define SUDO_API_VERSION_SET_MAJOR(vp, n) do { \
*(vp) = (*(vp) & 0x0000ffff) | ((n) << 16); \
} while(0)
#define SUDO_VERSION_SET_MINOR(vp, n) do { \
*(vp) = (*(vp) & 0xffff0000) | (n); \
} while(0)
II//OO PPlluuggiinn AAPPII
struct io_plugin {
#define SUDO_IO_PLUGIN 2
unsigned int type; /* always SUDO_IO_PLUGIN */
unsigned int version; /* always SUDO_API_VERSION */
int (*open)(unsigned int version, sudo_conv_t conversation
sudo_printf_t plugin_printf, char * const settings[],
char * const user_info[], int argc, char * const argv[],
char * const user_env[], char * const plugin_options[]);
void (*close)(int exit_status, int error); /* wait status or error */
int (*show_version)(int verbose);
int (*log_ttyin)(const char *buf, unsigned int len);
int (*log_ttyout)(const char *buf, unsigned int len);
int (*log_stdin)(const char *buf, unsigned int len);
int (*log_stdout)(const char *buf, unsigned int len);
int (*log_stderr)(const char *buf, unsigned int len);
void (*register_hooks)(int version,
int (*register_hook)(struct sudo_hook *hook));
void (*deregister_hooks)(int version,
int (*deregister_hook)(struct sudo_hook *hook));
};
When an I/O plugin is loaded, ssuuddoo runs the command in a pseudo-tty.
This makes it possible to log the input and output from the user's
session. If any of the standard input, standard output or standard
error do not correspond to a tty, ssuuddoo will open a pipe to capture the
I/O for logging before passing it on.
The log_ttyin function receives the raw user input from the terminal
device (note that this will include input even when echo is disabled,
such as when a password is read). The log_ttyout function receives
output from the pseudo-tty that is suitable for replaying the user's
session at a later time. The log_stdin, log_stdout and log_stderr
functions are only called if the standard input, standard output or
standard error respectively correspond to something other than a tty.
Any of the logging functions may be set to the NULL pointer if no
logging is to be performed. If the open function returns 0, no I/O
will be sent to the plugin.
The io_plugin struct has the following fields:
type
The type field should always be set to SUDO_IO_PLUGIN
version
The version field should be set to SUDO_API_VERSION.
This allows ssuuddoo to determine the API version the plugin was built
against.
open
int (*open)(unsigned int version, sudo_conv_t conversation
sudo_printf_t plugin_printf, char * const settings[],
char * const user_info[], int argc, char * const argv[],
char * const user_env[], char * const plugin_options[]);
The _o_p_e_n function is run before the _l_o_g___i_n_p_u_t, _l_o_g___o_u_t_p_u_t or
_s_h_o_w___v_e_r_s_i_o_n functions are called. It is only called if the
version is being requested or the _c_h_e_c_k___p_o_l_i_c_y function has
returned successfully. It returns 1 on success, 0 on failure, -1
if a general error occurred, or -2 if there was a usage error. In
the latter case, ssuuddoo will print a usage message before it exits.
If an error occurs, the plugin may optionally call the conversation
or plugin_printf function with SUDO_CONF_ERROR_MSG to present
additional error information to the user.
The function arguments are as follows:
version
The version passed in by ssuuddoo allows the plugin to determine
the major and minor version number of the plugin API supported
by ssuuddoo.
conversation
A pointer to the conversation function that may be used by the
_s_h_o_w___v_e_r_s_i_o_n function to display version information (see
show_version below). The conversation function may also be
used to display additional error message to the user. The
conversation function returns 0 on success and -1 on failure.
plugin_printf
A pointer to a printf-style function that may be used by the
_s_h_o_w___v_e_r_s_i_o_n function to display version information (see
show_version below). The plugin_printf function may also be
used to display additional error message to the user. The
plugin_printf function returns number of characters printed on
success and -1 on failure.
settings
A vector of user-supplied ssuuddoo settings in the form of
"name=value" strings. The vector is terminated by a NULL
pointer. These settings correspond to flags the user specified
when running ssuuddoo. As such, they will only be present when the
corresponding flag has been specified on the command line.
When parsing _s_e_t_t_i_n_g_s, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
See the "Policy Plugin API" section for a list of all possible
settings.
user_info
A vector of information about the user running the command in
the form of "name=value" strings. The vector is terminated by
a NULL pointer.
When parsing _u_s_e_r___i_n_f_o, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
See the "Policy Plugin API" section for a list of all possible
strings.
argc
The number of elements in _a_r_g_v, not counting the final NULL
pointer.
argv
If non-NULL, an argument vector describing a command the user
wishes to run in the same form as what would be passed to the
_e_x_e_c_v_e_(_) system call.
user_env
The user's environment in the form of a NULL-terminated vector
of "name=value" strings.
When parsing _u_s_e_r___e_n_v, the plugin should split on the ffiirrsstt
equal sign ('=') since the _n_a_m_e field will never include one
itself but the _v_a_l_u_e might.
plugin_options
Any (non-comment) strings immediately after the plugin path are
treated as arguments to the plugin. These arguments are split
on a white space boundary and are passed to the plugin in the
form of a NULL-terminated array of strings. If no arguments
were specified, _p_l_u_g_i_n___o_p_t_i_o_n_s will be the NULL pointer.
NOTE: the _p_l_u_g_i_n___o_p_t_i_o_n_s parameter is only available starting
with API version 1.2. A plugin mmuusstt check the API version
specified by the ssuuddoo front end before using _p_l_u_g_i_n___o_p_t_i_o_n_s.
Failure to do so may result in a crash.
close
void (*close)(int exit_status, int error);
The close function is called when the command being run by ssuuddoo
finishes.
The function arguments are as follows:
exit_status
The command's exit status, as returned by the _w_a_i_t(2) system
call. The value of exit_status is undefined if error is non-
zero.
error
If the command could not be executed, this is set to the value
of errno set by the _e_x_e_c_v_e(2) system call. If the command was
successfully executed, the value of error is 0.
show_version
int (*show_version)(int verbose);
The show_version function is called by ssuuddoo when the user specifies
the -V option. The plugin may display its version information to
the user via the conversation or plugin_printf function using
SUDO_CONV_INFO_MSG. If the user requests detailed version
information, the verbose flag will be set.
log_ttyin
int (*log_ttyin)(const char *buf, unsigned int len);
The _l_o_g___t_t_y_i_n function is called whenever data can be read from the
user but before it is passed to the running command. This allows
the plugin to reject data if it chooses to (for instance if the
input contains banned content). Returns 1 if the data should be
passed to the command, 0 if the data is rejected (which will
terminate the command) or -1 if an error occurred.
The function arguments are as follows:
buf The buffer containing user input.
len The length of _b_u_f in bytes.
log_ttyout
int (*log_ttyout)(const char *buf, unsigned int len);
The _l_o_g___t_t_y_o_u_t function is called whenever data can be read from
the command but before it is written to the user's terminal. This
allows the plugin to reject data if it chooses to (for instance if
the output contains banned content). Returns 1 if the data should
be passed to the user, 0 if the data is rejected (which will
terminate the command) or -1 if an error occurred.
The function arguments are as follows:
buf The buffer containing command output.
len The length of _b_u_f in bytes.
log_stdin
int (*log_stdin)(const char *buf, unsigned int len);
The _l_o_g___s_t_d_i_n function is only used if the standard input does not
correspond to a tty device. It is called whenever data can be read
from the standard input but before it is passed to the running
command. This allows the plugin to reject data if it chooses to
(for instance if the input contains banned content). Returns 1 if
the data should be passed to the command, 0 if the data is rejected
(which will terminate the command) or -1 if an error occurred.
The function arguments are as follows:
buf The buffer containing user input.
len The length of _b_u_f in bytes.
log_stdout
int (*log_stdout)(const char *buf, unsigned int len);
The _l_o_g___s_t_d_o_u_t function is only used if the standard output does
not correspond to a tty device. It is called whenever data can be
read from the command but before it is written to the standard
output. This allows the plugin to reject data if it chooses to
(for instance if the output contains banned content). Returns 1 if
the data should be passed to the user, 0 if the data is rejected
(which will terminate the command) or -1 if an error occurred.
The function arguments are as follows:
buf The buffer containing command output.
len The length of _b_u_f in bytes.
log_stderr
int (*log_stderr)(const char *buf, unsigned int len);
The _l_o_g___s_t_d_e_r_r function is only used if the standard error does not
correspond to a tty device. It is called whenever data can be read
from the command but before it is written to the standard error.
This allows the plugin to reject data if it chooses to (for
instance if the output contains banned content). Returns 1 if the
data should be passed to the user, 0 if the data is rejected (which
will terminate the command) or -1 if an error occurred.
The function arguments are as follows:
buf The buffer containing command output.
len The length of _b_u_f in bytes.
register_hooks
See the "Policy Plugin API" section for a description of
register_hooks.
deregister_hooks
See the "Policy Plugin API" section for a description of
deregister_hooks.
_I_/_O _P_l_u_g_i_n _V_e_r_s_i_o_n _M_a_c_r_o_s
Same as for the "Policy Plugin API".
HHooookk FFuunnccttiioonn AAPPII
Beginning with plugin API version 1.2, it is possible to install hooks
for certain functions called by the ssuuddoo front end.
Currently, the only supported hooks relate to the handling of
environment variables. Hooks can be used to intercept attempts to get,
set, or remove environment variables so that these changes can be
reflected in the version of the environment that is used to execute a
command. A future version of the API will support hooking internal
ssuuddoo front end functions as well.
_H_o_o_k _s_t_r_u_c_t_u_r_e
Hooks in ssuuddoo are described by the following structure:
typedef int (*sudo_hook_fn_t)();
struct sudo_hook {
int hook_version;
int hook_type;
sudo_hook_fn_t hook_fn;
void *closure;
};
The sudo_hook structure has the following fields:
hook_version
The hook_version field should be set to SUDO_HOOK_VERSION.
hook_type
The hook_type field may be one of the following supported hook
types:
SUDO_HOOK_SETENV
The C library setenv() function. Any registered hooks will run
before the C library implementation. The hook_fn field should
be a function that matches the following typedef:
typedef int (*sudo_hook_fn_setenv_t)(const char *name,
const char *value, int overwrite, void *closure);
If the registered hook does not match the typedef the results
are unspecified.
SUDO_HOOK_UNSETENV
The C library unsetenv() function. Any registered hooks will
run before the C library implementation. The hook_fn field
should be a function that matches the following typedef:
typedef int (*sudo_hook_fn_unsetenv_t)(const char *name,
void *closure);
SUDO_HOOK_GETENV
The C library getenv() function. Any registered hooks will run
before the C library implementation. The hook_fn field should
be a function that matches the following typedef:
typedef int (*sudo_hook_fn_getenv_t)(const char *name,
char **value, void *closure);
If the registered hook does not match the typedef the results
are unspecified.
SUDO_HOOK_PUTENV
The C library putenv() function. Any registered hooks will run
before the C library implementation. The hook_fn field should
be a function that matches the following typedef:
typedef int (*sudo_hook_fn_putenv_t)(char *string,
void *closure);
If the registered hook does not match the typedef the results
are unspecified.
hook_fn
sudo_hook_fn_t hook_fn;
The hook_fn field should be set to the plugin's hook
implementation. The actual function arguments will vary depending
on the hook_type (see hook_type above). In all cases, the closure
field of struct sudo_hook is passed as the last function parameter.
This can be used to pass arbitrary data to the plugin's hook
implementation.
The function return value may be one of the following:
SUDO_HOOK_RET_ERROR
The hook function encountered an error.
SUDO_HOOK_RET_NEXT
The hook completed without error, go on to the next hook
(including the native implementation if applicable). For
example, a getenv hook might return SUDO_HOOK_RET_NEXT if the
specified variable was not found in the private copy of the
environment.
SUDO_HOOK_RET_STOP
The hook completed without error, stop processing hooks for
this invocation. This can be used to replace the native
implementation. For example, a setenv hook that operates on a
private copy of the environment but leaves environ unchanged.
Note that it is very easy to create an infinite loop when hooking C
library functions. For example, a getenv hook that calls the snprintf
function may create a loop if the snprintf implementation calls getenv
to check the locale. To prevent this, you may wish to use a static
variable in the hook function to guard against nested calls. E.g.
static int in_progress = 0; /* avoid recursion */
if (in_progress)
return SUDO_HOOK_RET_NEXT;
in_progress = 1;
...
in_progress = 0;
return SUDO_HOOK_RET_STOP;
_H_o_o_k _A_P_I _V_e_r_s_i_o_n _M_a_c_r_o_s
/* Hook API version major/minor */
#define SUDO_HOOK_VERSION_MAJOR 1
#define SUDO_HOOK_VERSION_MINOR 0
#define SUDO_HOOK_MKVERSION(x, y) ((x << 16) | y)
#define SUDO_HOOK_VERSION SUDO_HOOK_MKVERSION(SUDO_HOOK_VERSION_MAJOR,\
SUDO_HOOK_VERSION_MINOR)
/* Getters and setters for hook API version */
#define SUDO_HOOK_VERSION_GET_MAJOR(v) ((v) >> 16)
#define SUDO_HOOK_VERSION_GET_MINOR(v) ((v) & 0xffff)
#define SUDO_HOOK_VERSION_SET_MAJOR(vp, n) do { \
*(vp) = (*(vp) & 0x0000ffff) | ((n) << 16); \
} while(0)
#define SUDO_HOOK_VERSION_SET_MINOR(vp, n) do { \
*(vp) = (*(vp) & 0xffff0000) | (n); \
} while(0)
CCoonnvveerrssaattiioonn AAPPII
If the plugin needs to interact with the user, it may do so via the
conversation function. A plugin should not attempt to read directly
from the standard input or the user's tty (neither of which are
guaranteed to exist). The caller must include a trailing newline in
msg if one is to be printed.
A printf-style function is also available that can be used to display
informational or error messages to the user, which is usually more
convenient for simple messages where no use input is required.
struct sudo_conv_message {
#define SUDO_CONV_PROMPT_ECHO_OFF 0x0001 /* do not echo user input */
#define SUDO_CONV_PROMPT_ECHO_ON 0x0002 /* echo user input */
#define SUDO_CONV_ERROR_MSG 0x0003 /* error message */
#define SUDO_CONV_INFO_MSG 0x0004 /* informational message */
#define SUDO_CONV_PROMPT_MASK 0x0005 /* mask user input */
#define SUDO_CONV_DEBUG_MSG 0x0006 /* debugging message */
#define SUDO_CONV_PROMPT_ECHO_OK 0x1000 /* flag: allow echo if no tty */
int msg_type;
int timeout;
const char *msg;
};
struct sudo_conv_reply {
char *reply;
};
typedef int (*sudo_conv_t)(int num_msgs,
const struct sudo_conv_message msgs[],
struct sudo_conv_reply replies[]);
typedef int (*sudo_printf_t)(int msg_type, const char *fmt, ...);
Pointers to the conversation and printf-style functions are passed in
to the plugin's open function when the plugin is initialized.
To use the conversation function, the plugin must pass an array of
sudo_conv_message and sudo_conv_reply structures. There must be a
struct sudo_conv_message and struct sudo_conv_reply for each message in
the conversation. The plugin is responsible for freeing the reply
buffer filled in to the struct sudo_conv_reply, if any.
The printf-style function uses the same underlying mechanism as the
conversation function but only supports SUDO_CONV_INFO_MSG,
SUDO_CONV_ERROR_MSG and SUDO_CONV_DEBUG_MSG for the _m_s_g___t_y_p_e parameter.
It can be more convenient than using the conversation function if no
user reply is needed and supports standard _p_r_i_n_t_f_(_) escape sequences.
Unlike, SUDO_CONV_INFO_MSG and SUDO_CONV_ERROR_MSG, messages sent with
the <SUDO_CONV_DEBUG_MSG> _m_s_g___t_y_p_e are not directly user-visible.
Instead, they are logged to the file specified in the Debug statement
(if any) in the _/_e_t_c_/_s_u_d_o_._c_o_n_f file. This allows a plugin to log
debugging information and is intended to be used in conjunction with
the _d_e_b_u_g___f_l_a_g_s setting.
See the sample plugin for an example of the conversation function
usage.
SSuuddooeerrss GGrroouupp PPlluuggiinn AAPPII
The _s_u_d_o_e_r_s module supports a plugin interface to allow non-Unix group
lookups. This can be used to query a group source other than the
standard Unix group database. A sample group plugin is bundled with
ssuuddoo that implements file-based lookups. Third party group plugins
include a QAS AD plugin available from Quest Software.
A group plugin must declare and populate a sudoers_group_plugin struct
in the global scope. This structure contains pointers to the functions
that implement plugin initialization, cleanup and group lookup.
struct sudoers_group_plugin {
unsigned int version;
int (*init)(int version, sudo_printf_t sudo_printf,
char *const argv[]);
void (*cleanup)(void);
int (*query)(const char *user, const char *group,
const struct passwd *pwd);
};
The sudoers_group_plugin struct has the following fields:
version
The version field should be set to GROUP_API_VERSION.
This allows _s_u_d_o_e_r_s to determine the API version the group plugin
was built against.
init
int (*init)(int version, sudo_printf_t plugin_printf,
char *const argv[]);
The _i_n_i_t function is called after _s_u_d_o_e_r_s has been parsed but
before any policy checks. It returns 1 on success, 0 on failure
(or if the plugin is not configured), and -1 if a error occurred.
If an error occurs, the plugin may call the plugin_printf function
with SUDO_CONF_ERROR_MSG to present additional error information to
the user.
The function arguments are as follows:
version
The version passed in by _s_u_d_o_e_r_s allows the plugin to determine
the major and minor version number of the group plugin API
supported by _s_u_d_o_e_r_s.
plugin_printf
A pointer to a printf-style function that may be used to
display informational or error message to the user. Returns
the number of characters printed on success and -1 on failure.
argv
A NULL-terminated array of arguments generated from the
_g_r_o_u_p___p_l_u_g_i_n option in _s_u_d_o_e_r_s. If no arguments were given,
_a_r_g_v will be NULL.
cleanup
void (*cleanup)();
The _c_l_e_a_n_u_p function is called when _s_u_d_o_e_r_s has finished its group
checks. The plugin should free any memory it has allocated and
close open file handles.
query
int (*query)(const char *user, const char *group,
const struct passwd *pwd);
The _q_u_e_r_y function is used to ask the group plugin whether _u_s_e_r is
a member of _g_r_o_u_p.
The function arguments are as follows:
user
The name of the user being looked up in the external group
database.
group
The name of the group being queried.
pwd The password database entry for _u_s_e_r, if any. If _u_s_e_r is not
present in the password database, _p_w_d will be NULL.
_G_r_o_u_p _A_P_I _V_e_r_s_i_o_n _M_a_c_r_o_s
/* Sudoers group plugin version major/minor */
#define GROUP_API_VERSION_MAJOR 1
#define GROUP_API_VERSION_MINOR 0
#define GROUP_API_VERSION ((GROUP_API_VERSION_MAJOR << 16) | \
GROUP_API_VERSION_MINOR)
/* Getters and setters for group version */
#define GROUP_API_VERSION_GET_MAJOR(v) ((v) >> 16)
#define GROUP_API_VERSION_GET_MINOR(v) ((v) & 0xffff)
#define GROUP_API_VERSION_SET_MAJOR(vp, n) do { \
*(vp) = (*(vp) & 0x0000ffff) | ((n) << 16); \
} while(0)
#define GROUP_API_VERSION_SET_MINOR(vp, n) do { \
*(vp) = (*(vp) & 0xffff0000) | (n); \
} while(0)
PPLLUUGGIINN AAPPII CCHHAANNGGEELLOOGG
The following revisions have been made to the Sudo Plugin API.
Version 1.0
Initial API version.
Version 1.1
The I/O logging plugin's open function was modified to take the
command_info list as an argument.
Version 1.2
The Policy and I/O logging plugins' open functions are now passed a
list of plugin options if any are specified in _/_e_t_c_/_s_u_d_o_._c_o_n_f.
A simple hooks API has been introduced to allow plugins to hook in
to the system's environment handling functions.
The init_session Policy plugin function is now passed a pointer to
the user environment which can be updated as needed. This can be
used to merge in environment variables stored in the PAM handle
before a command is run.
SSEEEE AALLSSOO
_s_u_d_o_e_r_s(4), _s_u_d_o(1m)
BBUUGGSS
If you feel you have found a bug in ssuuddoo, please submit a bug report at
http://www.sudo.ws/sudo/bugs/
SSUUPPPPOORRTT
Limited free support is available via the sudo-workers mailing list,
see http://www.sudo.ws/mailman/listinfo/sudo-workers to subscribe or
search the archives.
DDIISSCCLLAAIIMMEERR
ssuuddoo is provided ``AS IS'' and any express or implied warranties,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose are disclaimed.
See the LICENSE file distributed with ssuuddoo or
http://www.sudo.ws/sudo/license.html for complete details.
1.8.5 April 23, 2012 SUDO_PLUGIN(1m)
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to sudo_plugin.cat CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / sudo / doc