SUDOERS.LDAP(1m) System Manager's Manual SUDOERS.LDAP(1m)
NNAAMMEE
ssuuddooeerrss..llddaapp - sudo LDAP configuration
DDEESSCCRRIIPPTTIIOONN
In addition to the standard _s_u_d_o_e_r_s file, ssuuddoo may be configured via
LDAP. This can be especially useful for synchronizing _s_u_d_o_e_r_s in a
large, distributed environment.
Using LDAP for _s_u_d_o_e_r_s has several benefits:
oo ssuuddoo no longer needs to read _s_u_d_o_e_r_s in its entirety. When LDAP is
used, there are only two or three LDAP queries per invocation. This
makes it especially fast and particularly usable in LDAP
environments.
oo ssuuddoo no longer exits if there is a typo in _s_u_d_o_e_r_s. It is not
possible to load LDAP data into the server that does not conform to
the sudoers schema, so proper syntax is guaranteed. It is still
possible to have typos in a user or host name, but this will not
prevent ssuuddoo from running.
oo It is possible to specify per-entry options that override the global
default options. _/_e_t_c_/_s_u_d_o_e_r_s only supports default options and
limited options associated with user/host/commands/aliases. The
syntax is complicated and can be difficult for users to understand.
Placing the options directly in the entry is more natural.
oo The vviissuuddoo program is no longer needed. vviissuuddoo provides locking and
syntax checking of the _/_e_t_c_/_s_u_d_o_e_r_s file. Since LDAP updates are
atomic, locking is no longer necessary. Because syntax is checked
when the data is inserted into LDAP, there is no need for a
specialized tool to check syntax.
Another major difference between LDAP and file-based _s_u_d_o_e_r_s is that in
LDAP, ssuuddoo-specific Aliases are not supported.
For the most part, there is really no need for ssuuddoo-specific Aliases.
Unix groups, non-Unix groups (via the _g_r_o_u_p___p_l_u_g_i_n) or user netgroups can
be used in place of User_Aliases and Runas_Aliases. Host netgroups can
be used in place of Host_Aliases. Since groups and netgroups can also be
stored in LDAP there is no real need for ssuuddoo-specific aliases.
Cmnd_Aliases are not really required either since it is possible to have
multiple users listed in a sudoRole. Instead of defining a Cmnd_Alias
that is referenced by multiple users, one can create a sudoRole that
contains the commands and assign multiple users to it.
SSUUDDOOeerrss LLDDAAPP ccoonnttaaiinneerr
The _s_u_d_o_e_r_s configuration is contained in the ou=SUDOers LDAP container.
Sudo first looks for the cn=default entry in the SUDOers container. If
found, the multi-valued sudoOption attribute is parsed in the same manner
as a global Defaults line in _/_e_t_c_/_s_u_d_o_e_r_s. In the following example, the
SSH_AUTH_SOCK variable will be preserved in the environment for all
users.
dn: cn=defaults,ou=SUDOers,dc=example,dc=com
objectClass: top
objectClass: sudoRole
cn: defaults
description: Default sudoOption's go here
sudoOption: env_keep+=SSH_AUTH_SOCK
The equivalent of a sudoer in LDAP is a sudoRole. It consists of the
following attributes:
ssuuddooUUsseerr
A user name, user ID (prefixed with `#'), Unix group name or ID
(prefixed with `%' or `%#' respectively), user netgroup (prefixed
with `+'), or non-Unix group name or ID (prefixed with `%:' or
`%:#' respectively). Non-Unix group support is only available when
an appropriate _g_r_o_u_p___p_l_u_g_i_n is defined in the global _d_e_f_a_u_l_t_s
sudoRole object.
ssuuddooHHoosstt
A host name, IP address, IP network, or host netgroup (prefixed
with a `+'). The special value ALL will match any host.
ssuuddooCCoommmmaanndd
A fully-qualified Unix command name with optional command line
arguments, potentially including globbing characters (aka wild
cards). If a command name is preceded by an exclamation point,
`!', the user will be prohibited from running that command.
The built-in command ``sudoedit'' is used to permit a user to run
ssuuddoo with the --ee option (or as ssuuddooeeddiitt). It may take command line
arguments just as a normal command does. Note that ``sudoedit'' is
a command built into ssuuddoo itself and must be specified in without a
leading path.
The special value ALL will match any command.
If a command name is prefixed with a SHA-2 digest, it will only be
allowed if the digest matches. This may be useful in situations
where the user invoking ssuuddoo has write access to the command or its
parent directory. The following digest formats are supported:
sha224, sha256, sha384 and sha512. The digest name must be
followed by a colon (`:') and then the actual digest, in either hex
or base64 format. For example, given the following value for
sudoCommand:
sha224:0GomF8mNN3wlDt1HD9XldjJ3SNgpFdbjO1+NsQ /bin/ls
The user may only run _/_b_i_n_/_l_s if its sha224 digest matches the
specified value. Command digests are only supported by version
1.8.7 or higher.
ssuuddooOOppttiioonn
Identical in function to the global options described above, but
specific to the sudoRole in which it resides.
ssuuddooRRuunnAAssUUsseerr
A user name or uid (prefixed with `#') that commands may be run as
or a Unix group (prefixed with a `%') or user netgroup (prefixed
with a `+') that contains a list of users that commands may be run
as. The special value ALL will match any user.
The sudoRunAsUser attribute is only available in ssuuddoo versions
1.7.0 and higher. Older versions of ssuuddoo use the sudoRunAs
attribute instead.
ssuuddooRRuunnAAssGGrroouupp
A Unix group or gid (prefixed with `#') that commands may be run
as. The special value ALL will match any group.
The sudoRunAsGroup attribute is only available in ssuuddoo versions
1.7.0 and higher.
ssuuddooNNoottBBeeffoorree
A timestamp in the form yyyymmddHHMMSSZ that can be used to provide
a start date/time for when the sudoRole will be valid. If multiple
sudoNotBefore entries are present, the earliest is used. Note that
timestamps must be in Coordinated Universal Time (UTC), not the
local timezone. The minute and seconds portions are optional, but
some LDAP servers require that they be present (contrary to the
RFC).
The sudoNotBefore attribute is only available in ssuuddoo versions
1.7.5 and higher and must be explicitly enabled via the
SSUUDDOOEERRSS__TTIIMMEEDD option in _/_e_t_c_/_l_d_a_p_._c_o_n_f.
ssuuddooNNoottAAfftteerr
A timestamp in the form yyyymmddHHMMSSZ that indicates an
expiration date/time, after which the sudoRole will no longer be
valid. If multiple sudoNotBefore entries are present, the last one
is used. Note that timestamps must be in Coordinated Universal
Time (UTC), not the local timezone. The minute and seconds
portions are optional, but some LDAP servers require that they be
present (contrary to the RFC).
The sudoNotAfter attribute is only available in ssuuddoo versions 1.7.5
and higher and must be explicitly enabled via the SSUUDDOOEERRSS__TTIIMMEEDD
option in _/_e_t_c_/_l_d_a_p_._c_o_n_f.
ssuuddooOOrrddeerr
The sudoRole entries retrieved from the LDAP directory have no
inherent order. The sudoOrder attribute is an integer (or floating
point value for LDAP servers that support it) that is used to sort
the matching entries. This allows LDAP-based sudoers entries to
more closely mimic the behavior of the sudoers file, where the of
the entries influences the result. If multiple entries match, the
entry with the highest sudoOrder attribute is chosen. This
corresponds to the ``last match'' behavior of the sudoers file. If
the sudoOrder attribute is not present, a value of 0 is assumed.
The sudoOrder attribute is only available in ssuuddoo versions 1.7.5
and higher.
Each attribute listed above should contain a single value, but there may
be multiple instances of each attribute type. A sudoRole must contain at
least one sudoUser, sudoHost and sudoCommand.
The following example allows users in group wheel to run any command on
any host via ssuuddoo:
dn: cn=%wheel,ou=SUDOers,dc=example,dc=com
objectClass: top
objectClass: sudoRole
cn: %wheel
sudoUser: %wheel
sudoHost: ALL
sudoCommand: ALL
AAnnaattoommyy ooff LLDDAAPP ssuuddooeerrss llooookkuupp
When looking up a sudoer using LDAP there are only two or three LDAP
queries per invocation. The first query is to parse the global options.
The second is to match against the user's name and the groups that the
user belongs to. (The special ALL tag is matched in this query too.) If
no match is returned for the user's name and groups, a third query
returns all entries containing user netgroups and checks to see if the
user belongs to any of them.
If timed entries are enabled with the SSUUDDOOEERRSS__TTIIMMEEDD configuration
directive, the LDAP queries include a sub-filter that limits retrieval to
entries that satisfy the time constraints, if any.
DDiiffffeerreenncceess bbeettwweeeenn LLDDAAPP aanndd nnoonn--LLDDAAPP ssuuddooeerrss
There are some subtle differences in the way sudoers is handled once in
LDAP. Probably the biggest is that according to the RFC, LDAP ordering
is arbitrary and you cannot expect that Attributes and Entries are
returned in any specific order.
The order in which different entries are applied can be controlled using
the sudoOrder attribute, but there is no way to guarantee the order of
attributes within a specific entry. If there are conflicting command
rules in an entry, the negative takes precedence. This is called
paranoid behavior (not necessarily the most specific match).
Here is an example:
# /etc/sudoers:
# Allow all commands except shell
johnny ALL=(root) ALL,!/bin/sh
# Always allows all commands because ALL is matched last
puddles ALL=(root) !/bin/sh,ALL
# LDAP equivalent of johnny
# Allows all commands except shell
dn: cn=role1,ou=Sudoers,dc=my-domain,dc=com
objectClass: sudoRole
objectClass: top
cn: role1
sudoUser: johnny
sudoHost: ALL
sudoCommand: ALL
sudoCommand: !/bin/sh
# LDAP equivalent of puddles
# Notice that even though ALL comes last, it still behaves like
# role1 since the LDAP code assumes the more paranoid configuration
dn: cn=role2,ou=Sudoers,dc=my-domain,dc=com
objectClass: sudoRole
objectClass: top
cn: role2
sudoUser: puddles
sudoHost: ALL
sudoCommand: !/bin/sh
sudoCommand: ALL
Another difference is that negations on the Host, User or Runas are
currently ignored. For example, the following attributes do not behave
the way one might expect.
# does not match all but joe
# rather, does not match anyone
sudoUser: !joe
# does not match all but joe
# rather, matches everyone including Joe
sudoUser: ALL
sudoUser: !joe
# does not match all but web01
# rather, matches all hosts including web01
sudoHost: ALL
sudoHost: !web01
SSuuddooeerrss sscchheemmaa
In order to use ssuuddoo's LDAP support, the ssuuddoo schema must be installed on
your LDAP server. In addition, be sure to index the sudoUser attribute.
Three versions of the schema: one for OpenLDAP servers (_s_c_h_e_m_a_._O_p_e_n_L_D_A_P),
one for Netscape-derived servers (_s_c_h_e_m_a_._i_P_l_a_n_e_t), and one for Microsoft
Active Directory (_s_c_h_e_m_a_._A_c_t_i_v_e_D_i_r_e_c_t_o_r_y) may be found in the ssuuddoo
distribution.
The schema for ssuuddoo in OpenLDAP form is also included in the _E_X_A_M_P_L_E_S
section.
CCoonnffiigguurriinngg llddaapp..ccoonnff
Sudo reads the _/_e_t_c_/_l_d_a_p_._c_o_n_f file for LDAP-specific configuration.
Typically, this file is shared between different LDAP-aware clients. As
such, most of the settings are not ssuuddoo-specific. Note that ssuuddoo parses
_/_e_t_c_/_l_d_a_p_._c_o_n_f itself and may support options that differ from those
described in the system's ldap.conf(1m) manual. The path to _l_d_a_p_._c_o_n_f may
be overridden via the _l_d_a_p___c_o_n_f plugin argument in sudo.conf(4).
Also note that on systems using the OpenLDAP libraries, default values
specified in _/_e_t_c_/_o_p_e_n_l_d_a_p_/_l_d_a_p_._c_o_n_f or the user's _._l_d_a_p_r_c files are not
used.
Only those options explicitly listed in _/_e_t_c_/_l_d_a_p_._c_o_n_f as being supported
by ssuuddoo are honored. Configuration options are listed below in upper
case but are parsed in a case-independent manner.
The pound sign (`#') is used to indicate a comment. Both the comment
character and any text after it, up to the end of the line, are ignored.
Long lines can be continued with a backslash (`\') as the last character
on the line. Note that leading white space is removed from the beginning
of lines even when the continuation character is used.
UURRII _l_d_a_p_[_s_]_:_/_/_[_h_o_s_t_n_a_m_e_[_:_p_o_r_t_]_] _._._.
Specifies a white space-delimited list of one or more URIs
describing the LDAP server(s) to connect to. The _p_r_o_t_o_c_o_l may be
either _l_d_a_p _l_d_a_p_s, the latter being for servers that support TLS
(SSL) encryption. If no _p_o_r_t is specified, the default is port 389
for ldap:// or port 636 for ldaps://. If no _h_o_s_t_n_a_m_e is specified,
ssuuddoo will connect to _l_o_c_a_l_h_o_s_t. Multiple UURRII lines are treated
identically to a UURRII line containing multiple entries. Only
systems using the OpenSSL libraries support the mixing of ldap://
and ldaps:// URIs. Both the Netscape-derived and Tivoli LDAP
libraries used on most commercial versions of Unix are only capable
of supporting one or the other.
HHOOSSTT _n_a_m_e_[_:_p_o_r_t_] _._._.
If no UURRII is specified, the HHOOSSTT parameter specifies a white space-
delimited list of LDAP servers to connect to. Each host may
include an optional _p_o_r_t separated by a colon (`:'). The HHOOSSTT
parameter is deprecated in favor of the UURRII specification and is
included for backwards compatibility.
PPOORRTT _p_o_r_t___n_u_m_b_e_r
If no UURRII is specified, the PPOORRTT parameter specifies the default
port to connect to on the LDAP server if a HHOOSSTT parameter does not
specify the port itself. If no PPOORRTT parameter is used, the default
is port 389 for LDAP and port 636 for LDAP over TLS (SSL). The
PPOORRTT parameter is deprecated in favor of the UURRII specification and
is included for backwards compatibility.
BBIINNDD__TTIIMMEELLIIMMIITT _s_e_c_o_n_d_s
The BBIINNDD__TTIIMMEELLIIMMIITT parameter specifies the amount of time, in
seconds, to wait while trying to connect to an LDAP server. If
multiple UURRIIs or HHOOSSTTs are specified, this is the amount of time to
wait before trying the next one in the list.
NNEETTWWOORRKK__TTIIMMEEOOUUTT _s_e_c_o_n_d_s
An alias for BBIINNDD__TTIIMMEELLIIMMIITT for OpenLDAP compatibility.
TTIIMMEELLIIMMIITT _s_e_c_o_n_d_s
The TTIIMMEELLIIMMIITT parameter specifies the amount of time, in seconds,
to wait for a response to an LDAP query.
TTIIMMEEOOUUTT _s_e_c_o_n_d_s
The TTIIMMEEOOUUTT parameter specifies the amount of time, in seconds, to
wait for a response from the various LDAP APIs.
SSUUDDOOEERRSS__BBAASSEE _b_a_s_e
The base DN to use when performing ssuuddoo LDAP queries. Typically
this is of the form ou=SUDOers,dc=example,dc=com for the domain
example.com. Multiple SSUUDDOOEERRSS__BBAASSEE lines may be specified, in
which case they are queried in the order specified.
SSUUDDOOEERRSS__SSEEAARRCCHH__FFIILLTTEERR _l_d_a_p___f_i_l_t_e_r
An LDAP filter which is used to restrict the set of records
returned when performing a ssuuddoo LDAP query. Typically, this is of
the form attribute=value or
(&(attribute=value)(attribute2=value2)). The default search filter
is: objectClass=sudoRole. If _l_d_a_p___f_i_l_t_e_r is omitted, no search
filter will be used.
SSUUDDOOEERRSS__TTIIMMEEDD _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o
Whether or not to evaluate the sudoNotBefore and sudoNotAfter
attributes that implement time-dependent sudoers entries.
SSUUDDOOEERRSS__DDEEBBUUGG _d_e_b_u_g___l_e_v_e_l
This sets the debug level for ssuuddoo LDAP queries. Debugging
information is printed to the standard error. A value of 1 results
in a moderate amount of debugging information. A value of 2 shows
the results of the matches themselves. This parameter should not
be set in a production environment as the extra information is
likely to confuse users.
The SSUUDDOOEERRSS__DDEEBBUUGG parameter is deprecated and will be removed in a
future release. The same information is now logged via the ssuuddoo
debugging framework using the ``ldap'' subsystem at priorities _d_i_a_g
and _i_n_f_o for _d_e_b_u_g___l_e_v_e_l values 1 and 2 respectively. See the
sudo.conf(4) manual for details on how to configure ssuuddoo debugging.
BBIINNDDDDNN _D_N
The BBIINNDDDDNN parameter specifies the identity, in the form of a
Distinguished Name (DN), to use when performing LDAP operations.
If not specified, LDAP operations are performed with an anonymous
identity. By default, most LDAP servers will allow anonymous
access.
BBIINNDDPPWW _s_e_c_r_e_t
The BBIINNDDPPWW parameter specifies the password to use when performing
LDAP operations. This is typically used in conjunction with the
BBIINNDDDDNN parameter.
RROOOOTTBBIINNDDDDNN _D_N
The RROOOOTTBBIINNDDDDNN parameter specifies the identity, in the form of a
Distinguished Name (DN), to use when performing privileged LDAP
operations, such as _s_u_d_o_e_r_s queries. The password corresponding to
the identity should be stored in the or the path specified by the
_l_d_a_p___s_e_c_r_e_t plugin argument in sudo.conf(4), which defaults to
_/_e_t_c_/_l_d_a_p_._s_e_c_r_e_t. If no RROOOOTTBBIINNDDDDNN is specified, the BBIINNDDDDNN
identity is used (if any).
LLDDAAPP__VVEERRSSIIOONN _n_u_m_b_e_r
The version of the LDAP protocol to use when connecting to the
server. The default value is protocol version 3.
SSSSLL _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o
If the SSSSLL parameter is set to on, true or yes, TLS (SSL)
encryption is always used when communicating with the LDAP server.
Typically, this involves connecting to the server on port 636
(ldaps).
SSSSLL _s_t_a_r_t___t_l_s
If the SSSSLL parameter is set to start_tls, the LDAP server
connection is initiated normally and TLS encryption is begun before
the bind credentials are sent. This has the advantage of not
requiring a dedicated port for encrypted communications. This
parameter is only supported by LDAP servers that honor the
_s_t_a_r_t___t_l_s extension, such as the OpenLDAP and Tivoli Directory
servers.
TTLLSS__CCHHEECCKKPPEEEERR _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o
If enabled, TTLLSS__CCHHEECCKKPPEEEERR will cause the LDAP server's TLS
certificated to be verified. If the server's TLS certificate
cannot be verified (usually because it is signed by an unknown
certificate authority), ssuuddoo will be unable to connect to it. If
TTLLSS__CCHHEECCKKPPEEEERR is disabled, no check is made. Note that disabling
the check creates an opportunity for man-in-the-middle attacks
since the server's identity will not be authenticated. If
possible, the CA's certificate should be installed locally so it
can be verified. This option is not supported by the Tivoli
Directory Server LDAP libraries.
TTLLSS__CCAACCEERRTT _f_i_l_e _n_a_m_e
An alias for TTLLSS__CCAACCEERRTTFFIILLEE for OpenLDAP compatibility.
TTLLSS__CCAACCEERRTTFFIILLEE _f_i_l_e _n_a_m_e
The path to a certificate authority bundle which contains the
certificates for all the Certificate Authorities the client knows
to be valid, e.g. _/_e_t_c_/_s_s_l_/_c_a_-_b_u_n_d_l_e_._p_e_m. This option is only
supported by the OpenLDAP libraries. Netscape-derived LDAP
libraries use the same certificate database for CA and client
certificates (see TTLLSS__CCEERRTT).
TTLLSS__CCAACCEERRTTDDIIRR _d_i_r_e_c_t_o_r_y
Similar to TTLLSS__CCAACCEERRTTFFIILLEE but instead of a file, it is a directory
containing individual Certificate Authority certificates, e.g.
_/_e_t_c_/_s_s_l_/_c_e_r_t_s. The directory specified by TTLLSS__CCAACCEERRTTDDIIRR is
checked after TTLLSS__CCAACCEERRTTFFIILLEE. This option is only supported by the
OpenLDAP libraries.
TTLLSS__CCEERRTT _f_i_l_e _n_a_m_e
The path to a file containing the client certificate which can be
used to authenticate the client to the LDAP server. The
certificate type depends on the LDAP libraries used.
OpenLDAP:
tls_cert /etc/ssl/client_cert.pem
Netscape-derived:
tls_cert /var/ldap/cert7.db
Tivoli Directory Server:
Unused, the key database specified by TTLLSS__KKEEYY contains both
keys and certificates.
When using Netscape-derived libraries, this file may also
contain Certificate Authority certificates.
TTLLSS__KKEEYY _f_i_l_e _n_a_m_e
The path to a file containing the private key which matches the
certificate specified by TTLLSS__CCEERRTT. The private key must not be
password-protected. The key type depends on the LDAP libraries
used.
OpenLDAP:
tls_key /etc/ssl/client_key.pem
Netscape-derived:
tls_key /var/ldap/key3.db
Tivoli Directory Server:
tls_key /usr/ldap/ldapkey.kdb
When using Tivoli LDAP libraries, this file may also contain
Certificate Authority and client certificates and may be encrypted.
TTLLSS__KKEEYYPPWW _s_e_c_r_e_t
The TTLLSS__KKEEYYPPWW contains the password used to decrypt the key
database on clients using the Tivoli Directory Server LDAP library.
This should be a simple string without quotes. The password may
not include the comment character (`#') and escaping of special
characters with a backslash (`\') is not supported. If this option
is used, _/_e_t_c_/_l_d_a_p_._c_o_n_f must not be world-readable to avoid
exposing the password. Alternately, a _s_t_a_s_h _f_i_l_e can be used to
store the password in encrypted form (see below).
If no TTLLSS__KKEEYYPPWW is specified, a _s_t_a_s_h _f_i_l_e will be used if it
exists. The _s_t_a_s_h _f_i_l_e must have the same path as the file
specified by TTLLSS__KKEEYY, but use a .sth file extension instead of
.kdb, e.g. ldapkey.sth. The default ldapkey.kdb that ships with
Tivoli Directory Server is encrypted with the password
ssl_password. The _g_s_k_8_c_a_p_i_c_m_d utility can be used to manage the
key database and create a _s_t_a_s_h _f_i_l_e. This option is only
supported by the Tivoli LDAP libraries.
TTLLSS__RRAANNDDFFIILLEE _f_i_l_e _n_a_m_e
The TTLLSS__RRAANNDDFFIILLEE parameter specifies the path to an entropy source
for systems that lack a random device. It is generally used in
conjunction with _p_r_n_g_d or _e_g_d. This option is only supported by
the OpenLDAP libraries.
TTLLSS__CCIIPPHHEERRSS _c_i_p_h_e_r _l_i_s_t
The TTLLSS__CCIIPPHHEERRSS parameter allows the administer to restrict which
encryption algorithms may be used for TLS (SSL) connections. See
the OpenLDAP or Tivoli Directory Server manual for a list of valid
ciphers. This option is not supported by Netscape-derived
libraries.
UUSSEE__SSAASSLL _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o
Enable UUSSEE__SSAASSLL for LDAP servers that support SASL authentication.
SSAASSLL__AAUUTTHH__IIDD _i_d_e_n_t_i_t_y
The SASL user name to use when connecting to the LDAP server. By
default, ssuuddoo will use an anonymous connection.
RROOOOTTUUSSEE__SSAASSLL _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o
Enable RROOOOTTUUSSEE__SSAASSLL to enable SASL authentication when connecting
to an LDAP server from a privileged process, such as ssuuddoo.
RROOOOTTSSAASSLL__AAUUTTHH__IIDD _i_d_e_n_t_i_t_y
The SASL user name to use when RROOOOTTUUSSEE__SSAASSLL is enabled.
SSAASSLL__SSEECCPPRROOPPSS _n_o_n_e_/_p_r_o_p_e_r_t_i_e_s
SASL security properties or _n_o_n_e for no properties. See the SASL
programmer's manual for details.
KKRRBB55__CCCCNNAAMMEE _f_i_l_e _n_a_m_e
The path to the Kerberos 5 credential cache to use when
authenticating with the remote server.
DDEERREEFF _n_e_v_e_r_/_s_e_a_r_c_h_i_n_g_/_f_i_n_d_i_n_g_/_a_l_w_a_y_s
How alias dereferencing is to be performed when searching. See the
ldap.conf(1m) manual for a full description of this option.
See the _l_d_a_p_._c_o_n_f entry in the _E_X_A_M_P_L_E_S section.
CCoonnffiigguurriinngg nnsssswwiittcchh..ccoonnff
Unless it is disabled at build time, ssuuddoo consults the Name Service
Switch file, _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f, to specify the _s_u_d_o_e_r_s search order.
Sudo looks for a line beginning with sudoers: and uses this to determine
the search order. Note that ssuuddoo does not stop searching after the first
match and later matches take precedence over earlier ones. The following
sources are recognized:
files read sudoers from _/_e_t_c_/_s_u_d_o_e_r_s
ldap read sudoers from LDAP
In addition, the entry [NOTFOUND=return] will short-circuit the search if
the user was not found in the preceding source.
To consult LDAP first followed by the local sudoers file (if it exists),
use:
sudoers: ldap files
The local _s_u_d_o_e_r_s file can be ignored completely by using:
sudoers: ldap
If the _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f file is not present or there is no sudoers
line, the following default is assumed:
sudoers: files
Note that _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f is supported even when the underlying
operating system does not use an nsswitch.conf file, except on AIX (see
below).
CCoonnffiigguurriinngg nneettssvvcc..ccoonnff
On AIX systems, the _/_e_t_c_/_n_e_t_s_v_c_._c_o_n_f file is consulted instead of
_/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f. ssuuddoo simply treats _n_e_t_s_v_c_._c_o_n_f as a variant of
_n_s_s_w_i_t_c_h_._c_o_n_f; information in the previous section unrelated to the file
format itself still applies.
To consult LDAP first followed by the local sudoers file (if it exists),
use:
sudoers = ldap, files
The local _s_u_d_o_e_r_s file can be ignored completely by using:
sudoers = ldap
To treat LDAP as authoritative and only use the local sudoers file if the
user is not present in LDAP, use:
sudoers = ldap = auth, files
Note that in the above example, the auth qualifier only affects user
lookups; both LDAP and _s_u_d_o_e_r_s will be queried for Defaults entries.
If the _/_e_t_c_/_n_e_t_s_v_c_._c_o_n_f file is not present or there is no sudoers line,
the following default is assumed:
sudoers = files
FFIILLEESS
_/_e_t_c_/_l_d_a_p_._c_o_n_f LDAP configuration file
_/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f determines sudoers source order
_/_e_t_c_/_n_e_t_s_v_c_._c_o_n_f determines sudoers source order on AIX
EEXXAAMMPPLLEESS
EExxaammppllee llddaapp..ccoonnff
# Either specify one or more URIs or one or more host:port pairs.
# If neither is specified sudo will default to localhost, port 389.
#
#host ldapserver
#host ldapserver1 ldapserver2:390
#
# Default port if host is specified without one, defaults to 389.
#port 389
#
# URI will override the host and port settings.
uri ldap://ldapserver
#uri ldaps://secureldapserver
#uri ldaps://secureldapserver ldap://ldapserver
#
# The amount of time, in seconds, to wait while trying to connect to
# an LDAP server.
bind_timelimit 30
#
# The amount of time, in seconds, to wait while performing an LDAP query.
timelimit 30
#
# Must be set or sudo will ignore LDAP; may be specified multiple times.
sudoers_base ou=SUDOers,dc=example,dc=com
#
# verbose sudoers matching from ldap
#sudoers_debug 2
#
# Enable support for time-based entries in sudoers.
#sudoers_timed yes
#
# optional proxy credentials
#binddn <who to search as>
#bindpw <password>
#rootbinddn <who to search as, uses /etc/ldap.secret for bindpw>
#
# LDAP protocol version, defaults to 3
#ldap_version 3
#
# Define if you want to use an encrypted LDAP connection.
# Typically, you must also set the port to 636 (ldaps).
#ssl on
#
# Define if you want to use port 389 and switch to
# encryption before the bind credentials are sent.
# Only supported by LDAP servers that support the start_tls
# extension such as OpenLDAP.
#ssl start_tls
#
# Additional TLS options follow that allow tweaking of the
# SSL/TLS connection.
#
#tls_checkpeer yes # verify server SSL certificate
#tls_checkpeer no # ignore server SSL certificate
#
# If you enable tls_checkpeer, specify either tls_cacertfile
# or tls_cacertdir. Only supported when using OpenLDAP.
#
#tls_cacertfile /etc/certs/trusted_signers.pem
#tls_cacertdir /etc/certs
#
# For systems that don't have /dev/random
# use this along with PRNGD or EGD.pl to seed the
# random number pool to generate cryptographic session keys.
# Only supported when using OpenLDAP.
#
#tls_randfile /etc/egd-pool
#
# You may restrict which ciphers are used. Consult your SSL
# documentation for which options go here.
# Only supported when using OpenLDAP.
#
#tls_ciphers <cipher-list>
#
# Sudo can provide a client certificate when communicating to
# the LDAP server.
# Tips:
# * Enable both lines at the same time.
# * Do not password protect the key file.
# * Ensure the keyfile is only readable by root.
#
# For OpenLDAP:
#tls_cert /etc/certs/client_cert.pem
#tls_key /etc/certs/client_key.pem
#
# For SunONE or iPlanet LDAP, tls_cert and tls_key may specify either
# a directory, in which case the files in the directory must have the
# default names (e.g. cert8.db and key4.db), or the path to the cert
# and key files themselves. However, a bug in version 5.0 of the LDAP
# SDK will prevent specific file names from working. For this reason
# it is suggested that tls_cert and tls_key be set to a directory,
# not a file name.
#
# The certificate database specified by tls_cert may contain CA certs
# and/or the client's cert. If the client's cert is included, tls_key
# should be specified as well.
# For backward compatibility, "sslpath" may be used in place of tls_cert.
#tls_cert /var/ldap
#tls_key /var/ldap
#
# If using SASL authentication for LDAP (OpenSSL)
# use_sasl yes
# sasl_auth_id <SASL user name>
# rootuse_sasl yes
# rootsasl_auth_id <SASL user name for root access>
# sasl_secprops none
# krb5_ccname /etc/.ldapcache
SSuuddoo sscchheemmaa ffoorr OOppeennLLDDAAPP
The following schema, in OpenLDAP format, is included with ssuuddoo source
and binary distributions as _s_c_h_e_m_a_._O_p_e_n_L_D_A_P. Simply copy it to the
schema directory (e.g. _/_e_t_c_/_o_p_e_n_l_d_a_p_/_s_c_h_e_m_a), add the proper include line
in _s_l_a_p_d_._c_o_n_f and restart ssllaappdd.
attributetype ( 1.3.6.1.4.1.15953.9.1.1
NAME 'sudoUser'
DESC 'User(s) who may run sudo'
EQUALITY caseExactIA5Match
SUBSTR caseExactIA5SubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.2
NAME 'sudoHost'
DESC 'Host(s) who may run sudo'
EQUALITY caseExactIA5Match
SUBSTR caseExactIA5SubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.3
NAME 'sudoCommand'
DESC 'Command(s) to be executed by sudo'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.4
NAME 'sudoRunAs'
DESC 'User(s) impersonated by sudo'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.5
NAME 'sudoOption'
DESC 'Options(s) followed by sudo'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.6
NAME 'sudoRunAsUser'
DESC 'User(s) impersonated by sudo'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.7
NAME 'sudoRunAsGroup'
DESC 'Group(s) impersonated by sudo'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
attributetype ( 1.3.6.1.4.1.15953.9.1.8
NAME 'sudoNotBefore'
DESC 'Start of time interval for which the entry is valid'
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 )
attributetype ( 1.3.6.1.4.1.15953.9.1.9
NAME 'sudoNotAfter'
DESC 'End of time interval for which the entry is valid'
EQUALITY generalizedTimeMatch
ORDERING generalizedTimeOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 )
attributeTypes ( 1.3.6.1.4.1.15953.9.1.10
NAME 'sudoOrder'
DESC 'an integer to order the sudoRole entries'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 )
objectclass ( 1.3.6.1.4.1.15953.9.2.1 NAME 'sudoRole' SUP top STRUCTURAL
DESC 'Sudoer Entries'
MUST ( cn )
MAY ( sudoUser $ sudoHost $ sudoCommand $ sudoRunAs $ sudoRunAsUser $
sudoRunAsGroup $ sudoOption $ sudoNotBefore $ sudoNotAfter $
sudoOrder $ description )
)
SSEEEE AALLSSOO
ldap.conf(4), sudo.conf(4), sudoers(1m)
CCAAVVEEAATTSS
Note that there are differences in the way that LDAP-based _s_u_d_o_e_r_s is
parsed compared to file-based _s_u_d_o_e_r_s. See the _D_i_f_f_e_r_e_n_c_e_s _b_e_t_w_e_e_n _L_D_A_P
_a_n_d _n_o_n_-_L_D_A_P _s_u_d_o_e_r_s section for more information.
BBUUGGSS
If you feel you have found a bug in ssuuddoo, please submit a bug report at
http://www.sudo.ws/sudo/bugs/
SSUUPPPPOORRTT
Limited free support is available via the sudo-users mailing list, see
http://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the
archives.
DDIISSCCLLAAIIMMEERR
ssuuddoo is provided ``AS IS'' and any express or implied warranties,
including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose are disclaimed. See the LICENSE
file distributed with ssuuddoo or http://www.sudo.ws/sudo/license.html for
complete details.
Sudo 1.8.10 February 7, 2014 Sudo 1.8.10
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>