Annotation of embedaddon/thttpd/install-sh, revision 1.1.1.1
1.1 misho 1: #! /bin/sh
2: #
3: # install - install a program, script, or datafile
4: # This comes from X11R5 (mit/util/scripts/install.sh).
5: #
6: # Copyright 1991 by the Massachusetts Institute of Technology
7: #
8: # Permission to use, copy, modify, distribute, and sell this software and its
9: # documentation for any purpose is hereby granted without fee, provided that
10: # the above copyright notice appear in all copies and that both that
11: # copyright notice and this permission notice appear in supporting
12: # documentation, and that the name of M.I.T. not be used in advertising or
13: # publicity pertaining to distribution of the software without specific,
14: # written prior permission. M.I.T. makes no representations about the
15: # suitability of this software for any purpose. It is provided "as is"
16: # without express or implied warranty.
17: #
18: # Calling this script install-sh is preferred over install.sh, to prevent
19: # `make' implicit rules from creating a file called install from it
20: # when there is no Makefile.
21: #
22: # This script is compatible with the BSD install script, but was written
23: # from scratch. It can only install one file at a time, a restriction
24: # shared with many OS's install programs.
25:
26:
27: # set DOITPROG to echo to test this script
28:
29: # Don't use :- since 4.3BSD and earlier shells don't like it.
30: doit="${DOITPROG-}"
31:
32:
33: # put in absolute paths if you don't have them in your path; or use env. vars.
34:
35: mvprog="${MVPROG-mv}"
36: cpprog="${CPPROG-cp}"
37: chmodprog="${CHMODPROG-chmod}"
38: chownprog="${CHOWNPROG-chown}"
39: chgrpprog="${CHGRPPROG-chgrp}"
40: stripprog="${STRIPPROG-strip}"
41: rmprog="${RMPROG-rm}"
42: mkdirprog="${MKDIRPROG-mkdir}"
43:
44: transformbasename=""
45: transform_arg=""
46: instcmd="$mvprog"
47: chmodcmd="$chmodprog 0755"
48: chowncmd=""
49: chgrpcmd=""
50: stripcmd=""
51: rmcmd="$rmprog -f"
52: mvcmd="$mvprog"
53: src=""
54: dst=""
55: dir_arg=""
56:
57: while [ x"$1" != x ]; do
58: case $1 in
59: -c) instcmd="$cpprog"
60: shift
61: continue;;
62:
63: -d) dir_arg=true
64: shift
65: continue;;
66:
67: -m) chmodcmd="$chmodprog $2"
68: shift
69: shift
70: continue;;
71:
72: -o) chowncmd="$chownprog $2"
73: shift
74: shift
75: continue;;
76:
77: -g) chgrpcmd="$chgrpprog $2"
78: shift
79: shift
80: continue;;
81:
82: -s) stripcmd="$stripprog"
83: shift
84: continue;;
85:
86: -t=*) transformarg=`echo $1 | sed 's/-t=//'`
87: shift
88: continue;;
89:
90: -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
91: shift
92: continue;;
93:
94: *) if [ x"$src" = x ]
95: then
96: src=$1
97: else
98: # this colon is to work around a 386BSD /bin/sh bug
99: :
100: dst=$1
101: fi
102: shift
103: continue;;
104: esac
105: done
106:
107: if [ x"$src" = x ]
108: then
109: echo "install: no input file specified"
110: exit 1
111: else
112: true
113: fi
114:
115: if [ x"$dir_arg" != x ]; then
116: dst=$src
117: src=""
118:
119: if [ -d $dst ]; then
120: instcmd=:
121: else
122: instcmd=mkdir
123: fi
124: else
125:
126: # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
127: # might cause directories to be created, which would be especially bad
128: # if $src (and thus $dsttmp) contains '*'.
129:
130: if [ -f $src -o -d $src ]
131: then
132: true
133: else
134: echo "install: $src does not exist"
135: exit 1
136: fi
137:
138: if [ x"$dst" = x ]
139: then
140: echo "install: no destination specified"
141: exit 1
142: else
143: true
144: fi
145:
146: # If destination is a directory, append the input filename; if your system
147: # does not like double slashes in filenames, you may need to add some logic
148:
149: if [ -d $dst ]
150: then
151: dst="$dst"/`basename $src`
152: else
153: true
154: fi
155: fi
156:
157: ## this sed command emulates the dirname command
158: dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
159:
160: # Make sure that the destination directory exists.
161: # this part is taken from Noah Friedman's mkinstalldirs script
162:
163: # Skip lots of stat calls in the usual case.
164: if [ ! -d "$dstdir" ]; then
165: defaultIFS='
166: '
167: IFS="${IFS-${defaultIFS}}"
168:
169: oIFS="${IFS}"
170: # Some sh's can't handle IFS=/ for some reason.
171: IFS='%'
172: set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
173: IFS="${oIFS}"
174:
175: pathcomp=''
176:
177: while [ $# -ne 0 ] ; do
178: pathcomp="${pathcomp}${1}"
179: shift
180:
181: if [ ! -d "${pathcomp}" ] ;
182: then
183: $mkdirprog "${pathcomp}"
184: else
185: true
186: fi
187:
188: pathcomp="${pathcomp}/"
189: done
190: fi
191:
192: if [ x"$dir_arg" != x ]
193: then
194: $doit $instcmd $dst &&
195:
196: if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
197: if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
198: if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
199: if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
200: else
201:
202: # If we're going to rename the final executable, determine the name now.
203:
204: if [ x"$transformarg" = x ]
205: then
206: dstfile=`basename $dst`
207: else
208: dstfile=`basename $dst $transformbasename |
209: sed $transformarg`$transformbasename
210: fi
211:
212: # don't allow the sed command to completely eliminate the filename
213:
214: if [ x"$dstfile" = x ]
215: then
216: dstfile=`basename $dst`
217: else
218: true
219: fi
220:
221: # Make a temp file name in the proper directory.
222:
223: dsttmp=$dstdir/#inst.$$#
224:
225: # Move or copy the file name to the temp name
226:
227: $doit $instcmd $src $dsttmp &&
228:
229: trap "rm -f ${dsttmp}" 0 &&
230:
231: # and set any options; do chmod last to preserve setuid bits
232:
233: # If any of these fail, we abort the whole thing. If we want to
234: # ignore errors from any of these, just make sure not to ignore
235: # errors from the above "$doit $instcmd $src $dsttmp" command.
236:
237: if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
238: if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
239: if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
240: if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
241:
242: # Now rename the file to the real destination.
243:
244: $doit $rmcmd -f $dstdir/$dstfile &&
245: $doit $mvcmd $dsttmp $dstdir/$dstfile
246:
247: fi &&
248:
249:
250: exit 0
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to install-sh CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / thttpd