gpl/axl/ltmain.sh - diff

Return to ltmain.sh CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / gpl / axl

Diff for /gpl/axl/ltmain.sh between versions 1.1.1.1 and 1.1.1.2

-version 1.1.1.1, 2011/06/08 07:09:12
+version 1.1.1.2, 2012/02/17 12:50:02
  Line 1
-# ltmain.sh - Provide generalized library-building support services.
+# Generated from ltmain.m4sh.
-# NOTE: Changing this file will not affect anything until you rerun configure.
 # ltmain.sh (GNU libtool) 2.2.6b
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# 2007, 2008  Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
-#
+# This is free software; see the source for copying conditions.  There is NO
-# This program is free software; you can redistribute it and/or modify
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# GNU Libtool is free software; you can redistribute it and/or modify
  # it under the terms of the GNU General Public License as published by
  # the Free Software Foundation; either version 2 of the License, or
  # (at your option) any later version.
  #
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
  # WITHOUT ANY WARRANTY; without even the implied warranty of
  # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  # General Public License for more details.
  #
  # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
+# along with GNU Libtool; see the file COPYING.  If not, a copy
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# Usage: $progname [OPTION]... [MODE-ARG]...
  #
-# As a special exception to the GNU General Public License, if you
+# Provide generalized library-building support services.
-# distribute this file as part of a program that contains a
+#
-# configuration script generated by Autoconf, you may include it under
+#     --config             show all configuration variables
-# the same distribution terms that you use for the rest of that program.
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
+#
+# MODE must be one of the following:
+#
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:   $host
+#       shell:          $SHELL
+#       compiler:               $LTCC
+#       compiler flags:         $LTCFLAGS
+#       linker:         $LD (gnu? $with_gnu_ld)
+#       $progname:           (GNU libtool) 2.2.6b Debian-2.2.6b-2
+#       automake:               $automake_version
+#       autoconf:               $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
- basename="s,^.*/,,g"
- # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
- # is ksh but when the shell is invoked as "sh" and the current value of
- # the _XPG environment variable is not equal to 1 (one), the special
- # positional parameter $0, within a function call, is the name of the
- # function.
- progpath="$0"
- # The name of this program:
- progname=`echo "$progpath" | $SED $basename`
- modename="$progname"
- # Global variables:
- EXIT_SUCCESS=0
- EXIT_FAILURE=1
  PROGRAM=ltmain.sh
  PACKAGE=libtool
-VERSION="1.5.26 Debian 1.5.26-4+lenny1"
+VERSION="2.2.6b Debian-2.2.6b-2"
-TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
+TIMESTAMP=""
+package_revision=1.3017
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+# Be Bourne compatible
  if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
    emulate sh
    NULLCMD=:
- Line 60  fi
+ Line 91  fi
  BIN_SH=xpg4; export BIN_SH # for Tru64
  DUALCASE=1; export DUALCASE # for MKS sh
-# Check that we have a working $echo.
+# NLS nuisances: We save the old values to restore during execute mode.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-# NLS nuisances.
  # Only set LANG and LC_ALL to C if already set.
  # These must not be set unconditionally because not all systems understand
  # e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
+lt_user_locale=
-lt_env=
+lt_safe_locale=
  for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
  do
    eval "if test \"\${$lt_var+set}\" = set; then
           save_$lt_var=\$$lt_var
-          lt_env=\"$lt_var=\$$lt_var \$lt_env\"
+          $lt_var=C
-          $lt_var=C
            export $lt_var
+           lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+           lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
          fi"
  done
-if test -n "$lt_env"; then
+$lt_unset CDPATH
-  lt_env="env $lt_env"
-fi
+ : ${CP="cp -f"}
+ : ${ECHO="echo"}
+ : ${EGREP="/bin/grep -E"}
+ : ${FGREP="/bin/grep -F"}
+ : ${GREP="/bin/grep"}
+ : ${LN_S="ln -s"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+ : ${SED="/bin/sed"}
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
+ # Global variables:
+ EXIT_SUCCESS=0
+ EXIT_FAILURE=1
+ EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+ EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.
+ exit_status=$EXIT_SUCCESS
  # Make sure IFS has a sensible default
  lt_nl='
  '
  IFS="   $lt_nl"
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+dirname="s,/[^/]*$,,"
-  $echo "$modename: not configured to build any kind of library" 1>&2
+basename="s,^.*/,,"
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
-# Global variables.
+# func_dirname_and_basename file append nondir_replacement
-mode=$default_mode
+# perform func_basename and func_dirname in a single function
-nonopt=
+# call:
-prev=
+#   dirname:  Compute the dirname of FILE.  If nonempty,
-prevopt=
+#             add APPEND to the result, otherwise set result
-run=
+#             to NONDIR_REPLACEMENT.
-show="$echo"
+#             value returned in "$func_dirname_result"
-show_help=
+#   basename: Compute filename of FILE.
-execute_dlfiles=
+#             value retuned in "$func_basename_result"
-duplicate_deps=no
+# Implementation must be kept synchronized with func_dirname
-preserve_args=
+# and func_basename. For efficiency, we do not delegate to
-lo2o="s/\\.lo\$/.${objext}/"
+# those functions but instead duplicate the functionality here.
-o2lo="s/\\.${objext}\$/.lo/"
+func_dirname_and_basename ()
-extracted_archives=
+{
-extracted_serial=0
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
-#####################################
+# Generated shell functions inserted here.
-# Shell function definitions:
-# This seems to be the best place for them
+ # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+ # is ksh but when the shell is invoked as "sh" and the current value of
+ # the _XPG environment variable is not equal to 1 (one), the special
+ # positional parameter $0, within a function call, is the name of the
+ # function.
+ progpath="$0"
+ # The name of this program:
+ # In the unlikely event $progname began with a '-', it would play havoc with
+ # func_echo (imagine progname=-n), so we prepend ./ in that case:
+ func_dirname_and_basename "$progpath"
+ progname=$func_basename_result
+ case $progname in
+   -*) progname=./$progname ;;
+ esac
+ # Make sure we have an absolute path for reexecution:
+ case $progpath in
+   [\\/]*|[A-Za-z]:\\*) ;;
+   *[\\/]*)
+      progdir=$func_dirname_result
+      progdir=`cd "$progdir" && pwd`
+      progpath="$progdir/$progname"
+      ;;
+   *)
+      save_IFS="$IFS"
+      IFS=:
+      for progdir in $PATH; do
+        IFS="$save_IFS"
+        test -x "$progdir/$progname" && break
+      done
+      IFS="$save_IFS"
+      test -n "$progdir" || progdir=`pwd`
+      progpath="$progdir/$progname"
+      ;;
+ esac
+ # Sed substitution that helps us do robust quoting.  It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+ Xsed="${SED}"' -e 1s/^X//'
+ sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+ # Same as above, but do not quote variable references.
+ double_quote_subst='s/\(["`\\]\)/\\\1/g'
+ # Re-`\' parameter expansions in output of double_quote_subst that were
+ # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+ # in input to double_quote_subst, that '$' was protected from expansion.
+ # Since each input `\' is now two `\'s, look for any number of runs of
+ # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+ bs='\\'
+ bs2='\\\\'
+ bs4='\\\\\\\\'
+ dollar='\$'
+ sed_double_backslash="\
+   s/$bs4/&\\
+ /g
+   s/^$bs2$dollar/$bs&/
+   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+   s/\n//g"
+ # Standard options:
+ opt_dry_run=false
+ opt_help=false
+ opt_quiet=false
+ opt_verbose=false
+ opt_warning=:
+ # func_echo arg...
+ # Echo program name prefixed message, along with the current mode
+ # name if it has been set yet.
+ func_echo ()
+ {
+     $ECHO "$progname${mode+: }$mode: $*"
+ }
+ # func_verbose arg...
+ # Echo program name prefixed message in verbose mode only.
+ func_verbose ()
+ {
+     $opt_verbose && func_echo ${1+"$@"}
+     # A bug in bash halts the script if the last line of a function
+     # fails when set -e is in force, so we need another command to
+     # work around that:
+     :
+ }
+ # func_error arg...
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+     $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+ }
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+     $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+     # bash bug again:
+     :
+ }
+ # func_fatal_error arg...
+ # Echo program name prefixed message to standard error, and exit.
+ func_fatal_error ()
+ {
+     func_error ${1+"$@"}
+     exit $EXIT_FAILURE
+ }
+ # func_fatal_help arg...
+ # Echo program name prefixed message to standard error, followed by
+ # a help hint, and exit.
+ func_fatal_help ()
+ {
+     func_error ${1+"$@"}
+     func_fatal_error "$help"
+ }
+ help="Try \`$progname --help' for more information."  ## default
+ # func_grep expression filename
+ # Check whether EXPRESSION matches any line of FILENAME, without output.
+ func_grep ()
+ {
+     $GREP "$1" "$2" >/dev/null 2>&1
+ }
+ # func_mkdir_p directory-path
+ # Make sure the entire path to DIRECTORY-PATH is available.
+ func_mkdir_p ()
+ {
+     my_directory_path="$1"
+     my_dir_list=
+     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+       # Protect directory names starting with `-'
+       case $my_directory_path in
+         -*) my_directory_path="./$my_directory_path" ;;
+       esac
+       # While some portion of DIR does not yet exist...
+       while test ! -d "$my_directory_path"; do
+         # ...make a list in topmost first order.  Use a colon delimited
+         # list incase some portion of path contains whitespace.
+         my_dir_list="$my_directory_path:$my_dir_list"
+         # If the last portion added has no slash in it, the list is done
+         case $my_directory_path in */*) ;; *) break ;; esac
+         # ...otherwise throw away the child directory and loop
+         my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+       done
+       my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+       save_mkdir_p_IFS="$IFS"; IFS=':'
+       for my_dir in $my_dir_list; do
+         IFS="$save_mkdir_p_IFS"
+         # mkdir can fail with a `File exist' error if two processes
+         # try to create one of the directories concurrently.  Don't
+         # stop in that case!
+         $MKDIR "$my_dir" 2>/dev/null || :
+       done
+       IFS="$save_mkdir_p_IFS"
+       # Bail out if we (or some other process) failed to create a directory.
+       test -d "$my_directory_path" || \
+         func_fatal_error "Failed to create \`$1'"
+     fi
+ }
  # func_mktempdir [string]
  # Make a temporary directory that won't clash with other running
  # libtool processes, and avoids race conditions if possible.  If
- Line 167  func_mktempdir ()
+ Line 355  func_mktempdir ()
  {
      my_template="${TMPDIR-/tmp}/${1-$progname}"
-    if test "$run" = ":"; then
+    if test "$opt_dry_run" = ":"; then
        # Return a directory name, but don't create it in dry-run mode
        my_tmpdir="${my_template}-$$"
      else
- Line 176  func_mktempdir ()
+ Line 364  func_mktempdir ()
        my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
        if test ! -d "$my_tmpdir"; then
         # Failing that, at least try and use $RANDOM to avoid a race
         my_tmpdir="${my_template}-${RANDOM-0}$$"
         save_mktempdir_umask=`umask`
         umask 0077
-        $mkdir "$my_tmpdir"
+        $MKDIR "$my_tmpdir"
         umask $save_mktempdir_umask
        fi
        # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
+      test -d "$my_tmpdir" || \
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-        exit $EXIT_FAILURE
-      }
      fi
-    $echo "X$my_tmpdir" | $Xsed
+    $ECHO "X$my_tmpdir" | $Xsed
  }
-# func_win32_libid arg
+# func_quote_for_eval arg
-# return the library type of file 'arg'
+# Aesthetically quote ARG to be evaled later.
-#
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# Need a lot of goo to handle *both* DLLs and import libs
+# is double-quoted, suitable for a subsequent eval, whereas
-# Has to be a shell function in order to 'eat' the argument
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# that is supplied when $file_magic_command is called.
+# which are still active within double quotes backslashified.
-func_win32_libid ()
+func_quote_for_eval ()
  {
-  win32_libid_type="unknown"
+    case $1 in
-  win32_fileres=`file -L $1 2>/dev/null`
+      *[\\\`\"\$]*)
-  case $win32_fileres in
+        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
-  *ar\ archive\ import\ library*) # definitely import
+      *)
-    win32_libid_type="x86 archive import"
+        func_quote_for_eval_unquoted_result="$1" ;;
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-        $SED -n -e '1,100{
-                / I /{
-                        s,.*,import,
-                        p
-                        q
-                        }
-                }'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
      esac
-    ;;
     case $func_quote_for_eval_unquoted_result in
-  $echo $win32_libid_type
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
  }
-# func_infer_tag arg
+# func_quote_for_expand arg
-# Infer tagged configuration to use if any are available and
+# Aesthetically quote ARG to be evaled later; same as above,
-# if one wasn't chosen via the "--tag" command line option.
+# but do not quote variable references.
-# Only attempt this if the compiler in the base compile
+func_quote_for_expand ()
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
  {
-    if test -n "$available_tags" && test -z "$tagname"; then
+    case $1 in
-      CC_quoted=
+      *[\\\`\"]*)
-      for arg in $CC; do
+        my_arg=`$ECHO "X$1" | $Xsed \
-        case $arg in
+            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-          *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \      ]*|*]*|"")
-          arg="\"$arg\""
-          ;;
-        esac
-        CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
        *)
-        for z in $available_tags; do
+        my_arg="$1" ;;
-          if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+    esac
-            # Evaluate the configuration.
-            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+    case $my_arg in
-            CC_quoted=
+      # Double-quote args containing shell metacharacters to delay
-            for arg in $CC; do
+      # word splitting and command substitution for a subsequent eval.
-            # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
-            case $arg in
+      # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-              arg="\"$arg\""
+        my_arg="\"$my_arg\""
         ;;
     esac
-            CC_quoted="$CC_quoted $arg"
-          done
+    func_quote_for_expand_result="$my_arg"
-            case "$@ " in
-              " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-              # The compiler in the base compile command matches
-              # the one in the tagged configuration.
-              # Assume this is the tagged configuration we want.
-              tagname=$z
-              break
-              ;;
-            esac
-          fi
-        done
-        # If $tagname still isn't set, then no tagged configuration
-        # was found and let the user know that the "--tag" command
-        # line option must be used.
-        if test -z "$tagname"; then
-          $echo "$modename: unable to infer tagged configuration"
-          $echo "$modename: specify a tag with \`--tag'" 1>&2
-          exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-        fi
-        ;;
-      esac
-    fi
  }
-# func_extract_an_archive dir oldlib
+# func_show_eval cmd [fail_exp]
-func_extract_an_archive ()
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
  {
-    f_ex_an_ar_dir="$1"; shift
+    my_cmd="$1"
-    f_ex_an_ar_oldlib="$1"
+    my_fail_exp="${2-:}"
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    ${opt_silent-false} || {
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+      func_quote_for_expand "$my_cmd"
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+      eval "func_echo $func_quote_for_expand_result"
-     :
+    }
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+    if ${opt_dry_run-false}; then :; else
-      exit $EXIT_FAILURE
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+        eval "(exit $my_status); $my_fail_exp"
+      fi
      fi
  }
 # func_extract_archives gentop oldlib ...
-func_extract_archives ()
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
  {
-    my_gentop="$1"; shift
+    my_cmd="$1"
-    my_oldlibs=${1+"$@"}
+    my_fail_exp="${2-:}"
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-    $show "${rm}r $my_gentop"
+    ${opt_silent-false} || {
-    $run ${rm}r "$my_gentop"
+      func_quote_for_expand "$my_cmd"
-    $show "$mkdir $my_gentop"
+      eval "func_echo $func_quote_for_expand_result"
-    $run $mkdir "$my_gentop"
+    }
     my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+    if ${opt_dry_run-false}; then :; else
-      exit $my_status
+      eval "$lt_user_locale
+            $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+        eval "(exit $my_status); $my_fail_exp"
+      fi
      fi
+ }
-     for my_xlib in $my_oldlibs; do
-       # Extract the objects.
-       case $my_xlib in
-         [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-         *) my_xabs=`pwd`"/$my_xlib" ;;
-       esac
-       my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-       my_xlib_u=$my_xlib
-       while :; do
-         case " $extracted_archives " in
-         *" $my_xlib_u "*)
-           extracted_serial=`expr $extracted_serial + 1`
-           my_xlib_u=lt$extracted_serial-$my_xlib ;;
-         *) break ;;
-         esac
-       done
-       extracted_archives="$extracted_archives $my_xlib_u"
-       my_xdir="$my_gentop/$my_xlib_u"
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
+# func_version
-      exit_status=$?
+# Echo version message to standard output and exit.
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+func_version ()
-        exit $exit_status
+{
-      fi
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
-      case $host in
+        s/^# //
-      *-darwin*)
+        s/^# *$//
-        $show "Extracting $my_xabs"
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        # Do not bother doing anything if just a dry run
+        p
-        if test -z "$run"; then
+     }' < "$progpath"
-          darwin_orig_dir=`pwd`
+     exit $?
-          cd $my_xdir || exit $?
-          darwin_archive=$my_xabs
-          darwin_curdir=`pwd`
-          darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-          darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-          if test -n "$darwin_arches"; then
-            darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-            darwin_arch=
-            $show "$darwin_base_archive has multiple architectures $darwin_arches"
-            for darwin_arch in  $darwin_arches ; do
-              mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-              lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-              cd "$darwin_curdir"
-              $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-            done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-            darwin_file=
-            darwin_files=
-            for darwin_file in $darwin_filelist; do
-              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-              lipo -create -output "$darwin_file" $darwin_files
-            done # $darwin_filelist
-            ${rm}r unfat-$$
-            cd "$darwin_orig_dir"
-          else
-            cd "$darwin_orig_dir"
-            func_extract_an_archive "$my_xdir" "$my_xabs"
-          fi # $darwin_arches
-        fi # $run
-        ;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
  }
- # End of Shell function definitions
- #####################################
-# Darwin sucks
+# func_usage
-eval std_shrext=\"$shrext_cmds\"
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $SED -n '/^# Usage:/,/# -h/ {
+        s/^# //
+        s/^# *$//
+        s/\$progname/'$progname'/
+        p
+    }' < "$progpath"
+    $ECHO
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
-disable_libs=no
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+        s/^# //
+        s/^# *$//
+        s*\$progname*'$progname'*
+        s*\$host*'"$host"'*
+        s*\$SHELL*'"$SHELL"'*
+        s*\$LTCC*'"$LTCC"'*
+        s*\$LTCFLAGS*'"$LTCFLAGS"'*
+        s*\$LD*'"$LD"'*
+        s/\$with_gnu_ld/'"$with_gnu_ld"'/
+        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+        p
+     }' < "$progpath"
+    exit $?
+}
-# Parse our command line options once, thoroughly.
+# func_missing_arg argname
-while test "$#" -gt 0
+# Echo program name prefixed message to standard error and set global
-do
+# exit_cmd.
-  arg="$1"
+func_missing_arg ()
+{
+    func_error "missing argument for $1"
+    exit_cmd=exit
+}
+exit_cmd=:
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
    shift
+ elif test "X$1" = X--fallback-echo; then
+   # Avoid inline document here, it may be left over
+   :
+ elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+   # Yippee, $ECHO works!
+   :
+ else
+   # Restart under the correct shell, and then maybe $ECHO will work.
+   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+ fi
-  case $arg in
+if test "X$1" = X--fallback-echo; then
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  # used as fallback echo
-  *) optarg= ;;
+  shift
-  esac
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
-  # If the previous option needs an argument, assign it.
+magic="%%%MAGIC variable%%%"
-  if test -n "$prev"; then
+magic_exe="%%%MAGIC EXE variable%%%"
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-      # Check whether tagname contains only valid characters
+# Global variables.
-      case $tagname in
+# $mode is unset
-      *[!-_A-Za-z0-9,/]*)
+nonopt=
-        $echo "$progname: invalid tag name: $tagname" 1>&2
+execute_dlfiles=
-        exit $EXIT_FAILURE
+preserve_args=
-        ;;
+lo2o="s/\\.lo\$/.${objext}/"
-      esac
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
-      case $tagname in
+opt_dry_run=false
-      CC)
+opt_duplicate_deps=false
-        # Don't test for the "default" C tag, as we know, it's there, but
+opt_silent=false
-        # not specially marked.
+opt_debug=:
-        ;;
-      *)
-        if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-          taglist="$taglist $tagname"
-          # Evaluate the configuration.
-          eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-        else
-          $echo "$progname: ignoring unknown tag $tagname" 1>&2
-        fi
-        ;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-    prev=
+# If this variable is set in any of the actions, the command in it
-    prevopt=
+# will be execed at the end.  This prevents here-documents from being
-    continue
+# left over by shells.
-  fi
+exec_cmd=
-  # Have we seen a non-optional argument yet?
+# func_fatal_configuration arg...
-  case $arg in
+# Echo program name prefixed message to standard error, followed by
-  --help)
+# a configuration failure hint, and exit.
-    show_help=yes
+func_fatal_configuration ()
-    ;;
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
-   --version)
-     echo "\
- $PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-Copyright (C) 2008  Free Software Foundation, Inc.
+# func_config
-This is free software; see the source for copying conditions.  There is NO
+# Display the configuration for all the tags in this script.
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+func_config ()
-    exit $?
+{
-    ;;
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
-  --config)
+    # Default configuration.
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
      # Now print the configurations for the tags.
      for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
      done
      exit $?
-    ;;
+}
-  --debug)
+# func_features
-    $echo "$progname: enabling shell trace mode"
+# Display the features supported by this script.
-    set -x
+func_features ()
-    preserve_args="$preserve_args $arg"
+{
-    ;;
+    $ECHO "host: $host"
-  --dry-run | -n)
-    run=:
-    ;;
-  --features)
-    $echo "host: $host"
      if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
+      $ECHO "enable shared libraries"
      else
-      $echo "disable shared libraries"
+      $ECHO "disable shared libraries"
      fi
      if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
+      $ECHO "enable static libraries"
      else
-      $echo "disable static libraries"
+      $ECHO "disable static libraries"
      fi
      exit $?
-    ;;
+}
-  --finish) mode="finish" ;;
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
-  --mode) prevopt="--mode" prev=mode ;;
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  --mode=*) mode="$optarg" ;;
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-  --preserve-dup-deps) duplicate_deps="yes" ;;
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
-  --quiet | --silent)
+  # Don't test for the "default" C tag, as we know it's
-    show=:
+  # there but not specially marked.
-    preserve_args="$preserve_args $arg"
+  case $tagname in
-    ;;
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+        taglist="$taglist $tagname"
-  --tag)
+        # Evaluate the configuration.  Be careful to quote the path
-    prevopt="--tag"
+        # and the sed script, to avoid splitting on whitespace, but
-    prev=tag
+        # also don't use non-portable quotes within backquotes within
-    preserve_args="$preserve_args --tag"
+        # quotes we have to do it in 2 steps:
+        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+        eval "$extractedcf"
+      else
+        func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
      ;;
-  --tag=*)
+  compile|compil|compi|comp|com|co|c)
-    set tag "$optarg" ${1+"$@"}
+    shift; set dummy --mode compile ${1+"$@"}; shift
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
      ;;
+  execute|execut|execu|exec|exe|ex|e)
-  -dlopen)
+    shift; set dummy --mode execute ${1+"$@"}; shift
-    prevopt="-dlopen"
-    prev=execute_dlfiles
      ;;
+  finish|finis|fini|fin|fi|f)
-  -*)
+    shift; set dummy --mode finish ${1+"$@"}; shift
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
      ;;
+  install|instal|insta|inst|ins|in|i)
-  *)
+    shift; set dummy --mode install ${1+"$@"}; shift
-    nonopt="$arg"
-    break
      ;;
+   link|lin|li|l)
+     shift; set dummy --mode link ${1+"$@"}; shift
+     ;;
+   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+     shift; set dummy --mode uninstall ${1+"$@"}; shift
+     ;;
    esac
- done
-if test -n "$prevopt"; then
+  # Parse non-mode specific arguments:
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  while test "$#" -gt 0; do
-  $echo "$help" 1>&2
+    opt="$1"
-  exit $EXIT_FAILURE
+    shift
-fi
-case $disable_libs in
+    case $opt in
-no)
+      --config)         func_config                                     ;;
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
-# If this variable is set in any of the actions, the command in it
+      --debug)          preserve_args="$preserve_args $opt"
-# will be execed at the end.  This prevents here-documents from being
+                        func_echo "enabling shell trace mode"
-# left over by shells.
+                        opt_debug='set -x'
-exec_cmd=
+                        $opt_debug
+                        ;;
-if test -z "$show_help"; then
+      -dlopen)                test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        execute_dlfiles="$execute_dlfiles $1"
+                        shift
+                        ;;
-  # Infer the operation mode.
+      --dry-run | -n)   opt_dry_run=:                                   ;;
-  if test -z "$mode"; then
+      --features)       func_features                                   ;;
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+      --finish)                mode="finish"                                       ;;
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
+      --mode)                test "$#" -eq 0 && func_missing_arg "$opt" && break
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+                        case $1 in
-      mode=link
+                          # Valid mode arguments:
-      for arg
+                          clean)        ;;
-      do
+                          compile)      ;;
-        case $arg in
+                          execute)      ;;
-        -c)
+                          finish)       ;;
-           mode=compile
+                          install)      ;;
                           link)         ;;
                           relink)       ;;
                           uninstall)    ;;
-      done
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        mode="$1"
+                        shift
+                        ;;
+      --preserve-dup-deps)
+                        opt_duplicate_deps=:                         ;;
+      --quiet|--silent) preserve_args="$preserve_args $opt"
+                        opt_silent=:
+                        ;;
+      --verbose| -v)    preserve_args="$preserve_args $opt"
+                        opt_silent=false
+                        ;;
+      --tag)            test "$#" -eq 0 && func_missing_arg "$opt" && break
+                        preserve_args="$preserve_args $opt $1"
+                        func_enable_tag "$1"    # tagname is set here
+                        shift
+                        ;;
+      # Separate optargs to long options:
+      -dlopen=*|--mode=*|--tag=*)
+                        func_opt_split "$opt"
+                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+                        shift
+                        ;;
+      -\?|-h)           func_usage                                      ;;
+      --help)           opt_help=:                                      ;;
+      --version)       func_version                                    ;;
+      -*)               func_fatal_help "unrecognized option \`$opt'"   ;;
+      *)                nonopt="$opt"
+                        break
+                        ;;
+    esac
+  done
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
        ;;
-     *db | *dbx | *strace | *truss)
-       mode=execute
-       ;;
-     *install*|cp|mv)
-       mode=install
-       ;;
-     *rm)
-       mode=uninstall
-       ;;
      *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-      test -n "$execute_dlfiles" && mode=execute
+      ;;
+  esac
-      # Just use the default operation mode.
+  # Having warned about all mis-specified options, bail out if
-      if test -z "$mode"; then
+  # anything was wrong.
-        if test -n "$nonopt"; then
+  $exit_cmd $EXIT_FAILURE
-          $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+}
         else
-          $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+# func_check_version_match
-        fi
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
        fi
-      ;;
+    else
-    esac
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+    exit $EXIT_MISMATCH
    fi
+ }
+ ## ----------- ##
+ ##    Main.    ##
+ ## ----------- ##
+ $opt_help || {
+   # Sanity checks first:
+   func_check_version_match
+   if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+     func_fatal_configuration "not configured to build any kind of library"
+   fi
+   test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+   # Darwin sucks
+   eval std_shrext=\"$shrext_cmds\"
    # Only execute mode is allowed to have -dlopen flags.
    if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    func_error "unrecognized option \`-dlopen'"
-    $echo "$help" 1>&2
+    $ECHO "$help" 1>&2
      exit $EXIT_FAILURE
    fi
    # Change the help message to a mode-specific one.
    generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
+  help="Try \`$progname --help --mode=$mode' for more information."
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
+# func_lalib_p file
-  # libtool compile mode
+# True iff FILE is a libtool `.la' library or `.lo' object file.
-  compile)
+# This function is only a basic sanity check; it will hardly flush out
-    modename="$modename: compile"
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+        for lalib_p_l in 1 2 3 4
+        do
+            read lalib_p_line
+            case "$lalib_p_line" in
+                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+            esac
+        done
+        exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+        func_dirname_and_basename "$1" "" "."
+        func_stripname '' '.exe' "$func_basename_result"
+        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
+}
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*) . "$1" ;;
+    *)          . "./$1" ;;
+    esac
+}
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+        func_quote_for_eval "$arg"
+        CC_quoted="$CC_quoted $func_quote_for_eval_result"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+        for z in $available_tags; do
+          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+            # Evaluate the configuration.
+            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+            CC_quoted=
+            for arg in $CC; do
+              # Double-quote args containing other shell metacharacters.
+              func_quote_for_eval "$arg"
+              CC_quoted="$CC_quoted $func_quote_for_eval_result"
+            done
+            case "$@ " in
+              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+              # The compiler in the base compile command matches
+              # the one in the tagged configuration.
+              # Assume this is the tagged configuration we want.
+              tagname=$z
+              break
+              ;;
+            esac
+          fi
+        done
+        # If $tagname still isn't set, then no tagged configuration
+        # was found and let the user know that the "--tag" command
+        # line option must be used.
+        if test -z "$tagname"; then
+          func_echo "unable to infer tagged configuration"
+          func_fatal_error "specify a tag with \`--tag'"
+#       else
+#         func_verbose "using $tagname tagged configuration"
+        fi
+        ;;
+      esac
+    fi
+}
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+# Name of the PIC object.
+pic_object=$write_lobj
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
      # Get the compilation command and the source file.
      base_compile=
      srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
- Line 664  if test -z "$show_help"; then
+ Line 1109  if test -z "$show_help"; then
      arg_mode=normal
      libobj=
      later=
+     pie_flag=
      for arg
      do
- Line 684  if test -z "$show_help"; then
+ Line 1130  if test -z "$show_help"; then
          # Accept any command-line options.
          case $arg in
          -o)
-          if test -n "$libobj" ; then
+          test -n "$libobj" && \
-            $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+            func_fatal_error "you cannot specify \`-o' more than once"
-            exit $EXIT_FAILURE
-          fi
            arg_mode=target
            continue
            ;;
-        -static | -prefer-pic | -prefer-non-pic)
+        -pie | -fpie | -fPIE)
+          pie_flag="$pie_flag $arg"
+          continue
+          ;;
+        -shared | -static | -prefer-pic | -prefer-non-pic)
            later="$later $arg"
            continue
            ;;
- Line 708  if test -z "$show_help"; then
+ Line 1157  if test -z "$show_help"; then
            ;;            #  replaced later.  I would guess that would be a bug.
          -Wc,*)
-          args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+          func_stripname '-Wc,' '' "$arg"
+          args=$func_stripname_result
            lastarg=
            save_ifs="$IFS"; IFS=','
           for arg in $args; do
              IFS="$save_ifs"
+            func_quote_for_eval "$arg"
-            # Double-quote args containing other shell metacharacters.
+            lastarg="$lastarg $func_quote_for_eval_result"
-            # Many Bourne shells cannot handle close brackets correctly
-            # in scan sets, so we specify it separately.
-            case $arg in
-              *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-              arg="\"$arg\""
-              ;;
-            esac
-            lastarg="$lastarg $arg"
            done
            IFS="$save_ifs"
-          lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+          func_stripname ' ' '' "$lastarg"
+          lastarg=$func_stripname_result
            # Add the arguments to base_compile.
            base_compile="$base_compile $lastarg"
            continue
            ;;
-        * )
+        *)
            # Accept the current argument as the source file.
            # The previous "srcfile" becomes the current argument.
            #
- Line 744  if test -z "$show_help"; then
+ Line 1187  if test -z "$show_help"; then
        esac    #  case $arg_mode
        # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-        lastarg="\"$lastarg\""
-        ;;
-      esac
-      base_compile="$base_compile $lastarg"
      done # for arg
      case $arg_mode in
      arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
+      func_fatal_error "you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
        ;;
      target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      func_fatal_error "you must specify a target with \`-o'"
-      exit $EXIT_FAILURE
        ;;
      *)
        # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      test -z "$libobj" && {
+        func_basename "$srcfile"
+        libobj="$func_basename_result"
+      }
        ;;
      esac
      # Recognize several different file suffixes.
      # If the user specifies -o file.o, it is replaced with file.lo
-     xform='[cCFSifmso]'
      case $libobj in
-    *.ada) xform=ada ;;
+    *.[cCFSifmso] | \
-    *.adb) xform=adb ;;
+    *.ada | *.adb | *.ads | *.asm | \
-    *.ads) xform=ads ;;
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.asm) xform=asm ;;
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
-    *.c++) xform=c++ ;;
+      func_xform "$libobj"
-    *.cc) xform=cc ;;
+      libobj=$func_xform_result
-    *.ii) xform=ii ;;
+      ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.[fF][09]?) xform=[fF][09]. ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    *.obj) xform=obj ;;
-    *.sx) xform=sx ;;
      esac
-     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
      case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
      *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
-      exit $EXIT_FAILURE
        ;;
      esac
- Line 811  if test -z "$show_help"; then
+ Line 1230  if test -z "$show_help"; then
      for arg in $later; do
        case $arg in
+       -shared)
+         test "$build_libtool_libs" != yes && \
+           func_fatal_configuration "can not build a shared library"
+         build_old_libs=no
+         continue
+         ;;
        -static)
+         build_libtool_libs=no
          build_old_libs=yes
          continue
          ;;
- Line 828  if test -z "$show_help"; then
+ Line 1255  if test -z "$show_help"; then
        esac
      done
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    func_quote_for_eval "$libobj"
-    case $qlibobj in
+    test "X$libobj" != "X$func_quote_for_eval_result" \
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'     &()|`$[]' \
-        qlibobj="\"$qlibobj\"" ;;
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
-    esac
+    func_dirname_and_basename "$obj" "/" ""
-    test "X$libobj" != "X$qlibobj" \
+    objname="$func_basename_result"
-        && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"'    &()|`$[]' \
+    xdir="$func_dirname_result"
-        && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
      lobj=${xdir}$objdir/$objname
-    if test -z "$base_compile"; then
+    test -z "$base_compile" && \
-      $echo "$modename: you must specify a compilation command" 1>&2
+      func_fatal_help "you must specify a compilation command"
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
      # Delete any leftover library objects.
      if test "$build_old_libs" = yes; then
- Line 858  if test -z "$show_help"; then
+ Line 1274  if test -z "$show_help"; then
        removelist="$lobj $libobj ${libobj}T"
      fi
-     $run $rm $removelist
-     trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
      # On Cygwin there's no "real" PIC flag so we must build both object types
      case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
        pic_mode=default
        ;;
      esac
- Line 875  if test -z "$show_help"; then
+ Line 1288  if test -z "$show_help"; then
      # Calculate the filename of the output object if compiler does
      # not support -o with -c
      if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
        lockfile="$output_obj.lock"
-       removelist="$removelist $output_obj $lockfile"
-       trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
      else
        output_obj=
        need_locks=no
- Line 888  if test -z "$show_help"; then
+ Line 1299  if test -z "$show_help"; then
      # Lock this critical section if it is needed
      # We use this script file to make the link, it avoids creating a new file
      if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-        $show "Waiting for $lockfile to be removed"
+        func_echo "Waiting for $lockfile to be removed"
          sleep 2
        done
      elif test "$need_locks" = warn; then
        if test -f "$lockfile"; then
-        $echo "\
+        $ECHO "\
  *** ERROR, $lockfile exists and contains:
  `cat $lockfile 2>/dev/null`
- Line 905  repeat this compilation, it may succeed, by chance, bu
+ Line 1316  repeat this compilation, it may succeed, by chance, bu
  avoid parallel builds (make -j) in this platform, or get a better
  compiler."
-        $run $rm $removelist
+        $opt_dry_run || $RM $removelist
          exit $EXIT_FAILURE
        fi
-      $echo "$srcfile" > "$lockfile"
+      removelist="$removelist $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
      fi
+     $opt_dry_run || $RM $removelist
+     removelist="$removelist $lockfile"
+     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
      if test -n "$fix_srcfile_path"; then
        eval srcfile=\"$fix_srcfile_path\"
      fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    func_quote_for_eval "$srcfile"
-    case $qsrcfile in
+    qsrcfile=$func_quote_for_eval_result
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-     $run $rm "$libobj" "${libobj}T"
-     # Create a libtool object file (analogous to a ".la" file),
-     # but don't create it if we're doing a dry run.
-     test -z "$run" && cat > ${libobj}T <<EOF
- # $libobj - a libtool object file
- # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
- #
- # Please DO NOT delete this file!
- # It is necessary for linking the library.
- # Name of the PIC object.
- EOF
      # Only build a PIC object if we are building libtool libraries.
      if test "$build_libtool_libs" = yes; then
        # Without this assignment, base_compile gets emptied.
- Line 946  EOF
+ Line 1345  EOF
          command="$base_compile $qsrcfile"
        fi
-      if test ! -d "${xdir}$objdir"; then
+      func_mkdir_p "$xdir$objdir"
-        $show "$mkdir ${xdir}$objdir"
-        $run $mkdir ${xdir}$objdir
-        exit_status=$?
-        if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-          exit $exit_status
-        fi
-      fi
        if test -z "$output_obj"; then
          # Place PIC objects in $objdir
          command="$command -o $lobj"
        fi
-      $run $rm "$lobj" "$output_obj"
+      func_show_eval_locale "$command"  \
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-       $show "$command"
-       if $run eval $lt_env "$command"; then :
-       else
-         test -n "$output_obj" && $run $rm $removelist
-         exit $EXIT_FAILURE
-       fi
        if test "$need_locks" = warn &&
           test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-        $echo "\
+        $ECHO "\
  *** ERROR, $lockfile contains:
  `cat $lockfile 2>/dev/null`
- Line 985  repeat this compilation, it may succeed, by chance, bu
+ Line 1371  repeat this compilation, it may succeed, by chance, bu
  avoid parallel builds (make -j) in this platform, or get a better
  compiler."
-        $run $rm $removelist
+        $opt_dry_run || $RM $removelist
          exit $EXIT_FAILURE
        fi
        # Just move the object if needed, then go on to compile the next one
        if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-        $show "$mv $output_obj $lobj"
+        func_show_eval '$MV "$output_obj" "$lobj"' \
-        if $run $mv $output_obj $lobj; then :
+          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-        else
           error=$?
-          $run $rm $removelist
-          exit $error
-        fi
        fi
-       # Append the name of the PIC object to the libtool object file.
-       test -z "$run" && cat >> ${libobj}T <<EOF
- pic_object='$objdir/$objname'
- EOF
        # Allow error messages only from the first compilation.
        if test "$suppress_opt" = yes; then
         suppress_output=' >/dev/null 2>&1'
        fi
-     else
-       # No PIC object so indicate it doesn't exist in the libtool
-       # object file.
-       test -z "$run" && cat >> ${libobj}T <<EOF
- pic_object=none
- EOF
      fi
      # Only build a position-dependent object if we build old libraries.
      if test "$build_old_libs" = yes; then
        if test "$pic_mode" != yes; then
          # Don't build PIC code
-        command="$base_compile $qsrcfile"
+        command="$base_compile $qsrcfile$pie_flag"
        else
          command="$base_compile $qsrcfile $pic_flag"
        fi
- Line 1033  EOF
+ Line 1401  EOF
        # Suppress compiler output if we already did a PIC compilation.
        command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
+      func_show_eval_locale "$command" \
-      $show "$command"
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-      if $run eval $lt_env "$command"; then :
-      else
-        $run $rm $removelist
-        exit $EXIT_FAILURE
-      fi
        if test "$need_locks" = warn &&
           test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-        $echo "\
+        $ECHO "\
  *** ERROR, $lockfile contains:
  `cat $lockfile 2>/dev/null`
- Line 1057  repeat this compilation, it may succeed, by chance, bu
+ Line 1420  repeat this compilation, it may succeed, by chance, bu
  avoid parallel builds (make -j) in this platform, or get a better
  compiler."
-        $run $rm $removelist
+        $opt_dry_run || $RM $removelist
          exit $EXIT_FAILURE
        fi
        # Just move the object if needed
        if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-        $show "$mv $output_obj $obj"
+        func_show_eval '$MV "$output_obj" "$obj"' \
-        if $run $mv $output_obj $obj; then :
+          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+        removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+    exit $EXIT_SUCCESS
+}
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+Remove files from the build directory.
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+Compile a source file into a libtool library object.
+This mode accepts the following additional options:
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+Automatically set library path, then run a program.
+This mode accepts the following additional options:
+  -dlopen FILE      add the directory containing FILE to the library path
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+Complete the installation of libtool libraries.
+Each LIBDIR is a directory that contains libtool libraries.
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+Install executables or libraries.
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+The following components of INSTALL-COMMAND are treated specially:
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+Link object files or libraries together to form another library, or to
+create an executable program.
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+The following components of LINK-COMMAND are treated specially:
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+All other options (arguments beginning with \`-') are ignored.
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+Remove libraries from an installation directory.
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+      *)
+        func_fatal_help "invalid operation mode \`$mode'"
+        ;;
+    esac
+    $ECHO
+    $ECHO "Try \`$progname --help' for more information about other modes."
+    exit $?
+}
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      test -f "$file" \
+        || func_fatal_help "\`$file' is not a file"
+      dir=
+      case $file in
+      *.la)
+        # Check to see that this really is a libtool archive.
+        func_lalib_unsafe_p "$file" \
+          || func_fatal_help "\`$lib' is not a valid libtool archive"
+        # Read the libtool library.
+        dlname=
+        library_names=
+        func_source "$file"
+        # Skip this library if it cannot be dlopened.
+        if test -z "$dlname"; then
+          # Warn if it was a shared library.
+          test -n "$library_names" && \
+            func_warning "\`$file' was not linked with \`-export-dynamic'"
+          continue
+        fi
+        func_dirname "$file" "" "."
+        dir="$func_dirname_result"
+        if test -f "$dir/$objdir/$dlname"; then
+          dir="$dir/$objdir"
          else
-          error=$?
+          if test ! -f "$dir/$dlname"; then
-          $run $rm $removelist
+            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-          exit $error
+          fi
          fi
+         ;;
+       *.lo)
+         # Just add the directory containing the .lo file.
+         func_dirname "$file" "" "."
+         dir="$func_dirname_result"
+         ;;
+       *)
+         func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+         continue
+         ;;
+       esac
+       # Get the absolute pathname.
+       absdir=`cd "$dir" && pwd`
+       test -n "$absdir" && dir="$absdir"
+       # Now add the directory to shlibpath_var.
+       if eval "test -z \"\$$shlibpath_var\""; then
+         eval "$shlibpath_var=\"\$dir\""
+       else
+         eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
        fi
+     done
-      # Append the name of the non-PIC object the libtool object file.
+    # This variable tells wrapper scripts just to set shlibpath_var
-      # Only append if the libtool object file exists.
+    # rather than running their programs.
-      test -z "$run" && cat >> ${libobj}T <<EOF
+    libtool_execute_magic="$magic"
-# Name of the non-PIC object.
-non_pic_object='$objname'
-EOF
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+        # Do a test to see if this is really a libtool program.
+        if func_ltwrapper_script_p "$file"; then
+          func_source "$file"
+          # Transform arg to wrapped name.
+          file="$progdir/$program"
+        elif func_ltwrapper_executable_p "$file"; then
+          func_ltwrapper_scriptname "$file"
+          func_source "$func_ltwrapper_scriptname_result"
+          # Transform arg to wrapped name.
+          file="$progdir/$program"
+        fi
+        ;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
+    done
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+        # Export the shlibpath_var.
+        eval "export $shlibpath_var"
+      fi
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+        eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+              else
+                $lt_unset $lt_var
+              fi"
+      done
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
      else
-      # Append the name of the non-PIC object the libtool object file.
+      # Display what would be done.
-      # Only append if the libtool object file exists.
+      if test -n "$shlibpath_var"; then
-      test -z "$run" && cat >> ${libobj}T <<EOF
+        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-# Name of the non-PIC object.
+        $ECHO "export $shlibpath_var"
-non_pic_object=none
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
-EOF
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libdirs="$nonopt"
+    admincmds=
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+        libdirs="$libdirs $dir"
+      done
+      for libdir in $libdirs; do
+        if test -n "$finish_cmds"; then
+          # Do each command in the finish commands.
+          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+        fi
+        if test -n "$finish_eval"; then
+          # Do the single finish_eval.
+          eval cmds=\"$finish_eval\"
+          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+       $cmds"
+        fi
+      done
      fi
-    $run $mv "${libobj}T" "${libobj}"
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
-    # Unlock the critical section if it was locked
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    if test "$need_locks" != no; then
+    $ECHO "Libraries have been installed in:"
-      $run $rm "$lockfile"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
      fi
+     if test -n "$runpath_var"; then
+       $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+       $ECHO "     during linking"
+     fi
+     if test -n "$hardcode_libdir_flag_spec"; then
+       libdir=LIBDIR
+       eval flag=\"$hardcode_libdir_flag_spec\"
+       $ECHO "   - use the \`$flag' linker flag"
+     fi
+     if test -n "$admincmds"; then
+       $ECHO "   - have your system administrator run these commands:$admincmds"
+     fi
+     if test -f /etc/ld.so.conf; then
+       $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+     fi
+     $ECHO
+     $ECHO "See any operating system documentation about shared libraries for"
+     case $host in
+       solaris2.[6789]|solaris2.1[0-9])
+         $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+         $ECHO "pages."
+         ;;
+       *)
+         $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+         ;;
+     esac
+     $ECHO "X----------------------------------------------------------------------" | $Xsed
      exit $EXIT_SUCCESS
+ }
+ test "$mode" = finish && func_mode_finish ${1+"$@"}
+ # func_mode_install arg...
+ func_mode_install ()
+ {
+     $opt_debug
+     # There may be an optional sh(1) argument at the beginning of
+     # install_prog (especially on Windows NT).
+     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+        # Allow the use of GNU shtool's install command.
+        $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+       # Aesthetically quote it.
+       func_quote_for_eval "$nonopt"
+       install_prog="$func_quote_for_eval_result "
+       arg=$1
+       shift
+     else
+       install_prog=
+       arg=$nonopt
+     fi
+     # The real first argument should be the name of the installation program.
+     # Aesthetically quote it.
+     func_quote_for_eval "$arg"
+     install_prog="$install_prog$func_quote_for_eval_result"
+     # We need to accept at least all the BSD install flags.
+     dest=
+     files=
+     opts=
+     prev=
+     install_type=
+     isdir=no
+     stripme=
+     for arg
+     do
+       if test -n "$dest"; then
+         files="$files $dest"
+         dest=$arg
+         continue
+       fi
+       case $arg in
+       -d) isdir=yes ;;
+       -f)
+         case " $install_prog " in
+         *[\\\ /]cp\ *) ;;
+         *) prev=$arg ;;
+         esac
+         ;;
+       -g | -m | -o)
+         prev=$arg
+         ;;
+       -s)
+         stripme=" -s"
+         continue
+         ;;
+       -*)
+         ;;
+       *)
+         # If the previous option needed an argument, then skip it.
+         if test -n "$prev"; then
+           prev=
+         else
+           dest=$arg
+           continue
+         fi
+         ;;
+       esac
+       # Aesthetically quote the argument.
+       func_quote_for_eval "$arg"
+       install_prog="$install_prog $func_quote_for_eval_result"
+     done
+     test -z "$install_prog" && \
+       func_fatal_help "you must specify an install program"
+     test -n "$prev" && \
+       func_fatal_help "the \`$prev' option requires an argument"
+     if test -z "$files"; then
+       if test -z "$dest"; then
+         func_fatal_help "no file or destination specified"
+       else
+         func_fatal_help "you must specify a destination"
+       fi
+     fi
+     # Strip any trailing slash from the destination.
+     func_stripname '' '/' "$dest"
+     dest=$func_stripname_result
+     # Check to see that the destination is a directory.
+     test -d "$dest" && isdir=yes
+     if test "$isdir" = yes; then
+       destdir="$dest"
+       destname=
+     else
+       func_dirname_and_basename "$dest" "" "."
+       destdir="$func_dirname_result"
+       destname="$func_basename_result"
+       # Not a directory, so check to see that there is only one file specified.
+       set dummy $files; shift
+       test "$#" -gt 1 && \
+         func_fatal_help "\`$dest' is not a directory"
+     fi
+     case $destdir in
+     [\\/]* | [A-Za-z]:[\\/]*) ;;
+     *)
+       for file in $files; do
+         case $file in
+         *.lo) ;;
+         *)
+           func_fatal_help "\`$destdir' must be an absolute directory name"
+           ;;
+         esac
+       done
+       ;;
+     esac
+     # This variable tells wrapper scripts just to set variables rather
+     # than running their programs.
+     libtool_install_magic="$magic"
+     staticlibs=
+     future_libdirs=
+     current_libdirs=
+     for file in $files; do
+       # Do each installation.
+       case $file in
+       *.$libext)
+         # Do the static libraries later.
+         staticlibs="$staticlibs $file"
+         ;;
+       *.la)
+         # Check to see that this really is a libtool archive.
+         func_lalib_unsafe_p "$file" \
+           || func_fatal_help "\`$file' is not a valid libtool archive"
+         library_names=
+         old_library=
+         relink_command=
+         func_source "$file"
+         # Add the libdir to current_libdirs if it is the destination.
+         if test "X$destdir" = "X$libdir"; then
+           case "$current_libdirs " in
+           *" $libdir "*) ;;
+           *) current_libdirs="$current_libdirs $libdir" ;;
+           esac
+         else
+           # Note the libdir as a future libdir.
+           case "$future_libdirs " in
+           *" $libdir "*) ;;
+           *) future_libdirs="$future_libdirs $libdir" ;;
+           esac
+         fi
+         func_dirname "$file" "/" ""
+         dir="$func_dirname_result"
+         dir="$dir$objdir"
+         if test -n "$relink_command"; then
+           # Determine the prefix the user has applied to our future dir.
+           inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+           # Don't allow the user to place us outside of our expected
+           # location b/c this prevents finding dependent libraries that
+           # are installed to the same prefix.
+           # At present, this check doesn't affect windows .dll's that
+           # are installed into $libdir/../bin (currently, that works fine)
+           # but it's something to keep an eye on.
+           test "$inst_prefix_dir" = "$destdir" && \
+             func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+           if test -n "$inst_prefix_dir"; then
+             # Stick the inst_prefix_dir data into the link command.
+             relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+           else
+             relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+           fi
+           func_warning "relinking \`$file'"
+           func_show_eval "$relink_command" \
+             'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+         fi
+         # See the names of the shared library.
+         set dummy $library_names; shift
+         if test -n "$1"; then
+           realname="$1"
+           shift
+           srcname="$realname"
+           test -n "$relink_command" && srcname="$realname"T
+           # Install the shared library and build the symlinks.
+           func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+               'exit $?'
+           tstripme="$stripme"
+           case $host_os in
+           cygwin* | mingw* | pw32* | cegcc*)
+             case $realname in
+             *.dll.a)
+               tstripme=""
+               ;;
+             esac
+             ;;
+           esac
+           if test -n "$tstripme" && test -n "$striplib"; then
+             func_show_eval "$striplib $destdir/$realname" 'exit $?'
+           fi
+           if test "$#" -gt 0; then
+             # Delete the old symlinks, and create new ones.
+             # Try `ln -sf' first, because the `ln' binary might depend on
+             # the symlink we replace!  Solaris /bin/ln does not understand -f,
+             # so we also need to try rm && ln -s.
+             for linkname
+             do
+               test "$linkname" != "$realname" \
+                 && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+             done
+           fi
+           # Do each command in the postinstall commands.
+           lib="$destdir/$realname"
+           func_execute_cmds "$postinstall_cmds" 'exit $?'
+         fi
+         # Install the pseudo-library for information purposes.
+         func_basename "$file"
+         name="$func_basename_result"
+         instname="$dir/$name"i
+         func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+         # Maybe install the static library, too.
+         test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+         ;;
+       *.lo)
+         # Install (i.e. copy) a libtool object.
+         # Figure out destination file name, if it wasn't already specified.
+         if test -n "$destname"; then
+           destfile="$destdir/$destname"
+         else
+           func_basename "$file"
+           destfile="$func_basename_result"
+           destfile="$destdir/$destfile"
+         fi
+         # Deduce the name of the destination old-style object file.
+         case $destfile in
+         *.lo)
+           func_lo2o "$destfile"
+           staticdest=$func_lo2o_result
+           ;;
+         *.$objext)
+           staticdest="$destfile"
+           destfile=
+           ;;
+         *)
+           func_fatal_help "cannot copy a libtool object to \`$destfile'"
+           ;;
+         esac
+         # Install the libtool object if requested.
+         test -n "$destfile" && \
+           func_show_eval "$install_prog $file $destfile" 'exit $?'
+         # Install the old object if enabled.
+         if test "$build_old_libs" = yes; then
+           # Deduce the name of the old-style object file.
+           func_lo2o "$file"
+           staticobj=$func_lo2o_result
+           func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+         fi
+         exit $EXIT_SUCCESS
+         ;;
+       *)
+         # Figure out destination file name, if it wasn't already specified.
+         if test -n "$destname"; then
+           destfile="$destdir/$destname"
+         else
+           func_basename "$file"
+           destfile="$func_basename_result"
+           destfile="$destdir/$destfile"
+         fi
+         # If the file is missing, and there is a .exe on the end, strip it
+         # because it is most likely a libtool script we actually want to
+         # install
+         stripped_ext=""
+         case $file in
+           *.exe)
+             if test ! -f "$file"; then
+               func_stripname '' '.exe' "$file"
+               file=$func_stripname_result
+               stripped_ext=".exe"
+             fi
+             ;;
+         esac
+         # Do a test to see if this is really a libtool program.
+         case $host in
+         *cygwin* | *mingw*)
+             if func_ltwrapper_executable_p "$file"; then
+               func_ltwrapper_scriptname "$file"
+               wrapper=$func_ltwrapper_scriptname_result
+             else
+               func_stripname '' '.exe' "$file"
+               wrapper=$func_stripname_result
+             fi
+             ;;
+         *)
+             wrapper=$file
+             ;;
+         esac
+         if func_ltwrapper_script_p "$wrapper"; then
+           notinst_deplibs=
+           relink_command=
+           func_source "$wrapper"
+           # Check the variables that should have been set.
+           test -z "$generated_by_libtool_version" && \
+             func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+           finalize=yes
+           for lib in $notinst_deplibs; do
+             # Check to see that each library is installed.
+             libdir=
+             if test -f "$lib"; then
+               func_source "$lib"
+             fi
+             libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+             if test -n "$libdir" && test ! -f "$libfile"; then
+               func_warning "\`$lib' has not been installed in \`$libdir'"
+               finalize=no
+             fi
+           done
+           relink_command=
+           func_source "$wrapper"
+           outputname=
+           if test "$fast_install" = no && test -n "$relink_command"; then
+             $opt_dry_run || {
+               if test "$finalize" = yes; then
+                 tmpdir=`func_mktempdir`
+                 func_basename "$file$stripped_ext"
+                 file="$func_basename_result"
+                 outputname="$tmpdir/$file"
+                 # Replace the output file specification.
+                 relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+                 $opt_silent || {
+                   func_quote_for_expand "$relink_command"
+                   eval "func_echo $func_quote_for_expand_result"
+                 }
+                 if eval "$relink_command"; then :
+                   else
+                   func_error "error: relink \`$file' with the above command before installing it"
+                   $opt_dry_run || ${RM}r "$tmpdir"
+                   continue
+                 fi
+                 file="$outputname"
+               else
+                 func_warning "cannot relink \`$file'"
+               fi
+             }
+           else
+             # Install the binary that we compiled earlier.
+             file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+           fi
+         fi
+         # remove .exe since cygwin /usr/bin/install will append another
+         # one anyway
+         case $install_prog,$host in
+         */usr/bin/install*,*cygwin*)
+           case $file:$destfile in
+           *.exe:*.exe)
+             # this is ok
+             ;;
+           *.exe:*)
+             destfile=$destfile.exe
+             ;;
+           *:*.exe)
+             func_stripname '' '.exe' "$destfile"
+             destfile=$func_stripname_result
+             ;;
+           esac
+           ;;
+         esac
+         func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+         $opt_dry_run || if test -n "$outputname"; then
+           ${RM}r "$tmpdir"
+         fi
+         ;;
+       esac
+     done
+     for file in $staticlibs; do
+       func_basename "$file"
+       name="$func_basename_result"
+       # Set up the ranlib parameters.
+       oldlib="$destdir/$name"
+       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+       if test -n "$stripme" && test -n "$old_striplib"; then
+         func_show_eval "$old_striplib $oldlib" 'exit $?'
+       fi
+       # Do each command in the postinstall commands.
+       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+     done
+     test -n "$future_libdirs" && \
+       func_warning "remember to run \`$progname --finish$future_libdirs'"
+     if test -n "$current_libdirs"; then
+       # Maybe just do a dry run.
+       $opt_dry_run && current_libdirs=" -n$current_libdirs"
+       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+     else
+       exit $EXIT_SUCCESS
+     fi
+ }
+ test "$mode" = install && func_mode_install ${1+"$@"}
+ # func_generate_dlsyms outputname originator pic_p
+ # Extract symbols from dlprefiles and create ${outputname}S.o with
+ # a dlpreopen symbol table.
+ func_generate_dlsyms ()
+ {
+     $opt_debug
+     my_outputname="$1"
+     my_originator="$2"
+     my_pic_p="${3-no}"
+     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+     my_dlsyms=
+     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       if test -n "$NM" && test -n "$global_symbol_pipe"; then
+         my_dlsyms="${my_outputname}S.c"
+       else
+         func_error "not configured to extract global symbols from dlpreopened files"
+       fi
+     fi
+     if test -n "$my_dlsyms"; then
+       case $my_dlsyms in
+       "") ;;
+       *.c)
+         # Discover the nlist of each of the dlfiles.
+         nlist="$output_objdir/${my_outputname}.nm"
+         func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+         # Parse the name list into a source file.
+         func_verbose "creating $output_objdir/$my_dlsyms"
+         $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+ #ifdef __cplusplus
+ extern \"C\" {
+ #endif
+ /* External symbol declarations for the compiler. */\
+ "
+         if test "$dlself" = yes; then
+           func_verbose "generating symbol list for \`$output'"
+           $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+           # Add our own program objects to the symbol list.
+           progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+           for progfile in $progfiles; do
+             func_verbose "extracting global C symbols from \`$progfile'"
+             $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+           done
+           if test -n "$exclude_expsyms"; then
+             $opt_dry_run || {
+               eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+               eval '$MV "$nlist"T "$nlist"'
+             }
+           fi
+           if test -n "$export_symbols_regex"; then
+             $opt_dry_run || {
+               eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+               eval '$MV "$nlist"T "$nlist"'
+             }
+           fi
+           # Prepare the list of exported symbols
+           if test -z "$export_symbols"; then
+             export_symbols="$output_objdir/$outputname.exp"
+             $opt_dry_run || {
+               $RM $export_symbols
+               eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+               case $host in
+               *cygwin* | *mingw* | *cegcc* )
+                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                 ;;
+               esac
+             }
+           else
+             $opt_dry_run || {
+               eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+               eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+               eval '$MV "$nlist"T "$nlist"'
+               case $host in
+                 *cygwin | *mingw* | *cegcc* )
+                   eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                   eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                   ;;
+               esac
+             }
+           fi
+         fi
+         for dlprefile in $dlprefiles; do
+           func_verbose "extracting global C symbols from \`$dlprefile'"
+           func_basename "$dlprefile"
+           name="$func_basename_result"
+           $opt_dry_run || {
+             eval '$ECHO ": $name " >> "$nlist"'
+             eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+           }
+         done
+         $opt_dry_run || {
+           # Make sure we have at least an empty file.
+           test -f "$nlist" || : > "$nlist"
+           if test -n "$exclude_expsyms"; then
+             $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+             $MV "$nlist"T "$nlist"
+           fi
+           # Try sorting and uniquifying the output.
+           if $GREP -v "^: " < "$nlist" |
+               if sort -k 3 </dev/null >/dev/null 2>&1; then
+                 sort -k 3
+               else
+                 sort +2
+               fi |
+               uniq > "$nlist"S; then
+             :
+           else
+             $GREP -v "^: " < "$nlist" > "$nlist"S
+           fi
+           if test -f "$nlist"S; then
+             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+           else
+             $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+           fi
+           $ECHO >> "$output_objdir/$my_dlsyms" "\
+ /* The mapping between symbol names and symbols.  */
+ typedef struct {
+   const char *name;
+   void *address;
+ } lt_dlsymlist;
+ "
+           case $host in
+           *cygwin* | *mingw* | *cegcc* )
+             $ECHO >> "$output_objdir/$my_dlsyms" "\
+ /* DATA imports from DLLs on WIN32 con't be const, because
+    runtime relocations are performed -- see ld's documentation
+    on pseudo-relocs.  */"
+             lt_dlsym_const= ;;
+           *osf5*)
+             echo >> "$output_objdir/$my_dlsyms" "\
+ /* This system does not cope well with relocations in const data */"
+             lt_dlsym_const= ;;
+           *)
+             lt_dlsym_const=const ;;
+           esac
+           $ECHO >> "$output_objdir/$my_dlsyms" "\
+ extern $lt_dlsym_const lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[];
+ $lt_dlsym_const lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[] =
+ {\
+   { \"$my_originator\", (void *) 0 },"
+           case $need_lib_prefix in
+           no)
+             eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+             ;;
+           *)
+             eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+             ;;
+           esac
+           $ECHO >> "$output_objdir/$my_dlsyms" "\
+   {0, (void *) 0}
+ };
+ /* This works around a problem in FreeBSD linker */
+ #ifdef FREEBSD_WORKAROUND
+ static const void *lt_preloaded_setup() {
+   return lt_${my_prefix}_LTX_preloaded_symbols;
+ }
+ #endif
+ #ifdef __cplusplus
+ }
+ #endif\
+ "
+         } # !$opt_dry_run
+         pic_flag_for_symtable=
+         case "$compile_command " in
+         *" -static "*) ;;
+         *)
+           case $host in
+           # compiling the symbol table file with pic_flag works around
+           # a FreeBSD bug that causes programs to crash when -lm is
+           # linked before any other PIC object.  But we must not use
+           # pic_flag when linking with -static.  The problem exists in
+           # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+           *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+             pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+           *-*-hpux*)
+             pic_flag_for_symtable=" $pic_flag"  ;;
+           *)
+             if test "X$my_pic_p" != Xno; then
+               pic_flag_for_symtable=" $pic_flag"
+             fi
+             ;;
+           esac
+           ;;
+         esac
+         symtab_cflags=
+         for arg in $LTCFLAGS; do
+           case $arg in
+           -pie | -fpie | -fPIE) ;;
+           *) symtab_cflags="$symtab_cflags $arg" ;;
+           esac
+         done
+         # Now compile the dynamic symbol file.
+         func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+         # Clean up the generated files.
+         func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+         # Transform the symbol file into the correct name.
+         symfileobj="$output_objdir/${my_outputname}S.$objext"
+         case $host in
+         *cygwin* | *mingw* | *cegcc* )
+           if test -f "$output_objdir/$my_outputname.def"; then
+             compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+             finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+           else
+             compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+             finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+           fi
+           ;;
+         *)
+           compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+           finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+           ;;
+         esac
+         ;;
+       *)
+         func_fatal_error "unknown suffix for \`$my_dlsyms'"
+         ;;
+       esac
+     else
+       # We keep going just in case the user didn't refer to
+       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+       # really was required.
+       # Nullify the symbol file.
+       compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+       finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+     fi
+ }
+ # func_win32_libid arg
+ # return the library type of file 'arg'
+ #
+ # Need a lot of goo to handle *both* DLLs and import libs
+ # Has to be a shell function in order to 'eat' the argument
+ # that is supplied when $file_magic_command is called.
+ func_win32_libid ()
+ {
+   $opt_debug
+   win32_libid_type="unknown"
+   win32_fileres=`file -L $1 2>/dev/null`
+   case $win32_fileres in
+   *ar\ archive\ import\ library*) # definitely import
+     win32_libid_type="x86 archive import"
      ;;
+   *ar\ archive*) # could be an import, or static
+     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+       win32_nmres=`eval $NM -f posix -A $1 |
+         $SED -n -e '
+,100{
+                 / I /{
+                     s,.*,import,
+                     p
+                     q
+                 }
+             }'`
+       case $win32_nmres in
+       import*)  win32_libid_type="x86 archive import";;
+       *)        win32_libid_type="x86 archive static";;
+       esac
+     fi
+     ;;
+   *DLL*)
+     win32_libid_type="x86 DLL"
+     ;;
+   *executable*) # but shell scripts are "executable" too...
+     case $win32_fileres in
+     *MS\ Windows\ PE\ Intel*)
+       win32_libid_type="x86 DLL"
+       ;;
+     esac
+     ;;
+   esac
+   $ECHO "$win32_libid_type"
+ }
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+        *) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+        *" $my_xlib_u "*)
+          func_arith $extracted_serial + 1
+          extracted_serial=$func_arith_result
+          my_xlib_u=lt$extracted_serial-$my_xlib ;;
+        *) break ;;
+        esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+      func_mkdir_p "$my_xdir"
+      case $host in
+      *-darwin*)
+        func_verbose "Extracting $my_xabs"
+        # Do not bother doing anything if just a dry run
+        $opt_dry_run || {
+          darwin_orig_dir=`pwd`
+          cd $my_xdir || exit $?
+          darwin_archive=$my_xabs
+          darwin_curdir=`pwd`
+          darwin_base_archive=`basename "$darwin_archive"`
+          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+          if test -n "$darwin_arches"; then
+            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+            darwin_arch=
+            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+            for darwin_arch in  $darwin_arches ; do
+              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+              cd "$darwin_curdir"
+              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+            done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+            darwin_file=
+            darwin_files=
+            for darwin_file in $darwin_filelist; do
+              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+              $LIPO -create -output "$darwin_file" $darwin_files
+            done # $darwin_filelist
+            $RM -rf unfat-$$
+            cd "$darwin_orig_dir"
+          else
+            cd $darwin_orig_dir
+            func_extract_an_archive "$my_xdir" "$my_xabs"
+          fi # $darwin_arches
+        } # !$opt_dry_run
+        ;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+        func_emit_wrapper_part1_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_part1_arg1=$1
+        fi
+        $ECHO "\
+#! $SHELL
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+relink_command=\"$relink_command\"
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+        $ECHO "\
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+"
+}
+# end: func_emit_wrapper_part1
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+        func_emit_wrapper_part2_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_part2_arg1=$1
+        fi
+        $ECHO "\
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+        if test "$fast_install" = yes; then
+          $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+    file=\"\$\$-\$program\"
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+          $ECHO "\
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+        $ECHO \"\$relink_command_output\" >&2
+        $RM \"\$progdir/\$file\"
+        exit 1
+      fi
+    fi
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+        else
+          $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+        fi
+        $ECHO "\
+  if test -f \"\$progdir/\$program\"; then"
+        # Export our shlibpath_var if we have one.
+        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+          $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+    export $shlibpath_var
+"
+        fi
+        # fixup the dll searchpath if we need to.
+        if test -n "$dllsearchpath"; then
+          $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+        fi
+        $ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+        case $host in
+        # Backslashes separate directories on plain windows
+        *-*-mingw | *-*-os2* | *-cegcc*)
+          $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+          ;;
+        *)
+          $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+          ;;
+        esac
+        $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+        func_emit_wrapper_arg1=no
+        if test -n "$1" ; then
+          func_emit_wrapper_arg1=$1
+        fi
+        # split this up so that func_emit_cwrapperexe_src
+        # can call each part independently.
+        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
      case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+        cat <<EOF
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+            cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+const char *program_name = NULL;
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+static const char *script_text_part1 =
+EOF
+            func_emit_wrapper_part1 yes |
+                $SED -e 's/\([\\"]\)/\\\1/g' \
+                     -e 's/^/  "/' -e 's/$/\\n"/'
+            echo ";"
+            cat <<EOF
+static const char *script_text_part2 =
+EOF
+            func_emit_wrapper_part2 yes |
+                $SED -e 's/\([\\"]\)/\\\1/g' \
+                     -e 's/^/  "/' -e 's/$/\\n"/'
+            echo ";"
+            cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+              cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+            else
+              cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+            fi
+            if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+              cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+            else
+              cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+            fi
+            if test "$fast_install" = yes; then
+              cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+            else
+              cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+            fi
+            cat <<"EOF"
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+  int i;
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+  /* very simple arg parsing; don't want to rely on getopt */
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+        {
+EOF
+            case "$host" in
+              *mingw* | *cygwin* )
+                # make stdout use "unix" line endings
+                echo "          setmode(1,_O_BINARY);"
+                ;;
+              esac
+            cat <<"EOF"
+          printf ("%s", script_text_part1);
+          printf ("%s", script_text_part2);
+          return 0;
+        }
+    }
+  newargz = XMALLOC (char *, argc + 1);
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+                          tmp_pathspec));
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+                          actual_cwrapper_path));
+  XFREE (tmp_pathspec);
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+                          target_name));
+EOF
+            cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+            cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+            case $host_os in
+              mingw*)
+            cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+        *p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+        *p = '/';
+      }
+  }
+EOF
+            ;;
+            esac
+            cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
+    {
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+    }
+EOF
+            case $host_os in
+              mingw*)
+                cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      return 127;
+    }
+  return rval;
+EOF
+                ;;
+              *)
+                cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+                ;;
+            esac
+            cat <<"EOF"
+}
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+  return p;
+}
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+                          string) : NULL;
+}
+const char *
+base_name (const char *name)
+{
+  const char *base;
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+int
+check_executable (const char *path)
+{
+  struct stat st;
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+                          path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+                          path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+        return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+        {
+          concat_name = xstrdup (wrapper);
+          if (check_executable (concat_name))
+            return concat_name;
+          XFREE (concat_name);
+        }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+        has_slash = 1;
+        break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+        {
+          for (p = path; *p; p = p_next)
+            {
+              const char *q;
+              size_t p_len;
+              for (q = p; *q; q++)
+                if (IS_PATH_SEPARATOR (*q))
+                  break;
+              p_len = q - p;
+              p_next = (*q == '\0' ? q : q + 1);
+              if (p_len == 0)
+                {
+                  /* empty path: current directory */
+                  if (getcwd (tmp, LT_PATHMAX) == NULL)
+                    lt_fatal ("getcwd failed");
+                  tmp_len = strlen (tmp);
+                  concat_name =
+                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+                  memcpy (concat_name, tmp, tmp_len);
+                  concat_name[tmp_len] = '/';
+                  strcpy (concat_name + tmp_len + 1, wrapper);
+                }
+              else
+                {
+                  concat_name =
+                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+                  memcpy (concat_name, p, p_len);
+                  concat_name[p_len] = '/';
+                  strcpy (concat_name + p_len + 1, wrapper);
+                }
+              if (check_executable (concat_name))
+                return concat_name;
+              XFREE (concat_name);
+            }
+        }
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+                              tmp_pathspec));
+      if (lstat (tmp_pathspec, &s) == 0)
+        {
+          if (S_ISLNK (s.st_mode) != 0)
+            {
+              has_symlinks = 1;
+              break;
+            }
+          /* search backwards for last DIR_SEPARATOR */
+          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+            p--;
+          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+            {
+              /* no more DIR_SEPARATORS left */
+              break;
+            }
+          *p = '\0';
+        }
+      else
+        {
+          char *errstr = strerror (errno);
+          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+        }
+    }
+  XFREE (tmp_pathspec);
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+  assert (str != NULL);
+  assert (pat != NULL);
+  len = strlen (str);
+  patlen = strlen (pat);
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+        *str = '\0';
+    }
+  return str;
+}
+static void
+lt_error_core (int exit_status, const char *mode,
+               const char *message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+  p = strchr (arg, (int)'=');
+  if (!p)
+    return 1;
+  *value = xstrdup (++p);
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+  return 0;
+}
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        # It is impossible to link a dll without this setting, and
        # we shouldn't force the makefile maintainer to figure out
        # which system we are compiling for in order to pass an extra
- Line 1121  EOF
+ Line 4051  EOF
        allow_undefined=yes
        ;;
      esac
-    libtool_args="$nonopt"
+    libtool_args=$nonopt
      base_compile="$nonopt $@"
-    compile_command="$nonopt"
+    compile_command=$nonopt
-    finalize_command="$nonopt"
+    finalize_command=$nonopt
      compile_rpath=
      finalize_rpath=
- Line 1139  EOF
+ Line 4069  EOF
      dllsearchpath=
      lib_search_path=`pwd`
      inst_prefix_dir=
+     new_inherited_linker_flags=
      avoid_version=no
      dlfiles=
- Line 1154  EOF
+ Line 4085  EOF
      no_install=no
      objs=
      non_pic_objects=
-     notinst_path= # paths that contain not-installed libtool libraries
      precious_files_regex=
      prefer_static_libs=no
      preload=no
- Line 1168  EOF
+ Line 4098  EOF
      thread_safe=no
      vinfo=
      vinfo_number=no
+     weak_libs=
      single_module="${wl}-single_module"
      func_infer_tag $base_compile
      # We need to know -static, to get the right output filenames.
      for arg
      do
        case $arg in
+       -shared)
+         test "$build_libtool_libs" != yes && \
+           func_fatal_configuration "can not build a shared library"
+         build_old_libs=no
+         break
+         ;;
        -all-static | -static | -static-libtool-libs)
          case $arg in
          -all-static)
            if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-            $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+            func_warning "complete static linking is impossible in this configuration"
            fi
            if test -n "$link_static_flag"; then
              dlopen_self=$dlopen_self_static
- Line 1214  EOF
+ Line 4150  EOF
      while test "$#" -gt 0; do
        arg="$1"
        shift
-      case $arg in
+      func_quote_for_eval "$arg"
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+      qarg=$func_quote_for_eval_unquoted_result
-        qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+      func_append libtool_args " $func_quote_for_eval_result"
-        ;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
        # If the previous option needs an argument, assign it.
        if test -n "$prev"; then
          case $prev in
          output)
-          compile_command="$compile_command @OUTPUT@"
+          func_append compile_command " @OUTPUT@"
-          finalize_command="$finalize_command @OUTPUT@"
+          func_append finalize_command " @OUTPUT@"
            ;;
          esac
- Line 1235  EOF
+ Line 4167  EOF
          dlfiles|dlprefiles)
            if test "$preload" = no; then
              # Add the symbol object into the linking commands.
-            compile_command="$compile_command @SYMFILE@"
+            func_append compile_command " @SYMFILE@"
-            finalize_command="$finalize_command @SYMFILE@"
+            func_append finalize_command " @SYMFILE@"
              preload=yes
            fi
            case $arg in
- Line 1274  EOF
+ Line 4206  EOF
            ;;
          expsyms)
            export_symbols="$arg"
-          if test ! -f "$arg"; then
+          test -f "$arg" \
-            $echo "$modename: symbol file \`$arg' does not exist"
+            || func_fatal_error "symbol file \`$arg' does not exist"
-            exit $EXIT_FAILURE
-          fi
            prev=
            continue
            ;;
- Line 1286  EOF
+ Line 4216  EOF
            prev=
            continue
            ;;
-        inst_prefix)
+        framework)
-          inst_prefix_dir="$arg"
+          case $host in
+            *-*-darwin*)
+              case "$deplibs " in
+                *" $qarg.ltframework "*) ;;
+                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+                   ;;
+              esac
+              ;;
+          esac
            prev=
            continue
            ;;
-        precious_regex)
+        inst_prefix)
-          precious_files_regex="$arg"
+          inst_prefix_dir="$arg"
            prev=
            continue
            ;;
-         release)
-           release="-$arg"
-           prev=
-           continue
-           ;;
          objectlist)
            if test -f "$arg"; then
              save_arg=$arg
              moreargs=
-            for fil in `cat $save_arg`
+            for fil in `cat "$save_arg"`
              do
  #             moreargs="$moreargs $fil"
                arg=$fil
                # A libtool-controlled object.
                # Check to see that this really is a libtool object.
-              if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+              if func_lalib_unsafe_p "$arg"; then
                  pic_object=
                  non_pic_object=
                  # Read the .lo file
-                # If there is no directory component, then add one.
+                func_source "$arg"
-                case $arg in
-                */* | *\\*) . $arg ;;
-                *) . ./$arg ;;
-                esac
-                if test -z "$pic_object" || \
+                if test -z "$pic_object" ||
                     test -z "$non_pic_object" ||
-                   test "$pic_object" = none && \
+                   test "$pic_object" = none &&
                     test "$non_pic_object" = none; then
-                  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+                  func_fatal_error "cannot find name of object for \`$arg'"
-                  exit $EXIT_FAILURE
                  fi
                  # Extract subdirectory from the argument.
-                xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+                func_dirname "$arg" "/" ""
-                if test "X$xdir" = "X$arg"; then
+                xdir="$func_dirname_result"
-                  xdir=
-                else
-                  xdir="$xdir/"
-                fi
                  if test "$pic_object" != none; then
                    # Prepend the subdirectory the object is found in.
- Line 1362  EOF
+ Line 4286  EOF
                    fi
                    # A PIC object.
-                  libobjs="$libobjs $pic_object"
+                  func_append libobjs " $pic_object"
                    arg="$pic_object"
                  fi
- Line 1372  EOF
+ Line 4296  EOF
                    non_pic_object="$xdir$non_pic_object"
                    # A standard non-PIC object
-                  non_pic_objects="$non_pic_objects $non_pic_object"
+                  func_append non_pic_objects " $non_pic_object"
                    if test -z "$pic_object" || test "$pic_object" = none ; then
                      arg="$non_pic_object"
                    fi
- Line 1380  EOF
+ Line 4304  EOF
                    # If the PIC object exists, use it instead.
                    # $xdir was prepended to $pic_object above.
                    non_pic_object="$pic_object"
-                  non_pic_objects="$non_pic_objects $non_pic_object"
+                  func_append non_pic_objects " $non_pic_object"
                  fi
                else
                  # Only an error if not doing a dry-run.
-                if test -z "$run"; then
+                if $opt_dry_run; then
-                  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-                  exit $EXIT_FAILURE
-                else
-                  # Dry-run case.
                    # Extract subdirectory from the argument.
-                  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+                  func_dirname "$arg" "/" ""
-                  if test "X$xdir" = "X$arg"; then
+                  xdir="$func_dirname_result"
-                    xdir=
-                  else
-                    xdir="$xdir/"
-                  fi
-                  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+                  func_lo2o "$arg"
-                  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+                  pic_object=$xdir$objdir/$func_lo2o_result
-                  libobjs="$libobjs $pic_object"
+                  non_pic_object=$xdir$func_lo2o_result
-                  non_pic_objects="$non_pic_objects $non_pic_object"
+                  func_append libobjs " $pic_object"
+                  func_append non_pic_objects " $non_pic_object"
+                else
+                  func_fatal_error "\`$arg' is not a valid libtool object"
                  fi
                fi
              done
            else
-            $echo "$modename: link input file \`$save_arg' does not exist"
+            func_fatal_error "link input file \`$arg' does not exist"
-            exit $EXIT_FAILURE
            fi
            arg=$save_arg
            prev=
            continue
            ;;
+         precious_regex)
+           precious_files_regex="$arg"
+           prev=
+           continue
+           ;;
+         release)
+           release="-$arg"
+           prev=
+           continue
+           ;;
          rpath | xrpath)
            # We need an absolute path.
            case $arg in
            [\\/]* | [A-Za-z]:[\\/]*) ;;
            *)
-            $echo "$modename: only absolute run-paths are allowed" 1>&2
+            func_fatal_error "only absolute run-paths are allowed"
-            exit $EXIT_FAILURE
              ;;
            esac
            if test "$prev" = rpath; then
- Line 1436  EOF
+ Line 4362  EOF
            prev=
            continue
            ;;
-        xcompiler)
+        shrext)
-          compiler_flags="$compiler_flags $qarg"
+          shrext_cmds="$arg"
            prev=
-           compile_command="$compile_command $qarg"
-           finalize_command="$finalize_command $qarg"
            continue
            ;;
-        xlinker)
+        weak)
-          linker_flags="$linker_flags $qarg"
+          weak_libs="$weak_libs $arg"
-          compiler_flags="$compiler_flags $wl$qarg"
            prev=
-           compile_command="$compile_command $wl$qarg"
-           finalize_command="$finalize_command $wl$qarg"
            continue
            ;;
          xcclinker)
            linker_flags="$linker_flags $qarg"
            compiler_flags="$compiler_flags $qarg"
            prev=
-          compile_command="$compile_command $qarg"
+          func_append compile_command " $qarg"
-          finalize_command="$finalize_command $qarg"
+          func_append finalize_command " $qarg"
            continue
            ;;
-        shrext)
+        xcompiler)
-          shrext_cmds="$arg"
+          compiler_flags="$compiler_flags $qarg"
            prev=
+           func_append compile_command " $qarg"
+           func_append finalize_command " $qarg"
            continue
            ;;
-        darwin_framework|darwin_framework_skip)
+        xlinker)
-          test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+          linker_flags="$linker_flags $qarg"
-          compile_command="$compile_command $arg"
+          compiler_flags="$compiler_flags $wl$qarg"
-          finalize_command="$finalize_command $arg"
            prev=
+           func_append compile_command " $wl$qarg"
+           func_append finalize_command " $wl$qarg"
            continue
            ;;
          *)
- Line 1484  EOF
+ Line 4408  EOF
        case $arg in
        -all-static)
          if test -n "$link_static_flag"; then
-          compile_command="$compile_command $link_static_flag"
+          # See comment for -static flag below, for more details.
-          finalize_command="$finalize_command $link_static_flag"
+          func_append compile_command " $link_static_flag"
+          func_append finalize_command " $link_static_flag"
          fi
          continue
          ;;
        -allow-undefined)
          # FIXME: remove this flag sometime in the future.
-        $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-        continue
          ;;
        -avoid-version)
- Line 1518  EOF
+ Line 4442  EOF
        -export-symbols | -export-symbols-regex)
          if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-          $echo "$modename: more than one -exported-symbols argument is not allowed"
+          func_fatal_error "more than one -exported-symbols argument is not allowed"
-          exit $EXIT_FAILURE
          fi
          if test "X$arg" = "X-export-symbols"; then
            prev=expsyms
- Line 1529  EOF
+ Line 4452  EOF
          continue
          ;;
-      -framework|-arch|-isysroot)
+      -framework)
-        case " $CC " in
+        prev=framework
-          *" ${arg} ${1} "* | *" ${arg} ${1} "*)
-                prev=darwin_framework_skip ;;
-          *) compiler_flags="$compiler_flags $arg"
-             prev=darwin_framework ;;
-        esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
          continue
          ;;
- Line 1551  EOF
+ Line 4467  EOF
        -L[A-Z][A-Z]*:*)
          case $with_gcc/$host in
          no/*-*-irix* | /*-*-irix*)
-          compile_command="$compile_command $arg"
+          func_append compile_command " $arg"
-          finalize_command="$finalize_command $arg"
+          func_append finalize_command " $arg"
            ;;
          esac
          continue
          ;;
        -L*)
-        dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+        func_stripname '-L' '' "$arg"
+        dir=$func_stripname_result
+        if test -z "$dir"; then
+          if test "$#" -gt 0; then
+            func_fatal_error "require no space between \`-L' and \`$1'"
+          else
+            func_fatal_error "need path for \`-L' option"
+          fi
+        fi
          # We need an absolute path.
          case $dir in
          [\\/]* | [A-Za-z]:[\\/]*) ;;
          *)
            absdir=`cd "$dir" && pwd`
-          if test -z "$absdir"; then
+          test -z "$absdir" && \
-            $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+            func_fatal_error "cannot determine absolute directory name of \`$dir'"
-            absdir="$dir"
-            notinst_path="$notinst_path $dir"
-          fi
            dir="$absdir"
            ;;
          esac
- Line 1581  EOF
+ Line 4502  EOF
            ;;
          esac
          case $host in
-        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-          testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
            case :$dllsearchpath: in
            *":$dir:"*) ;;
+           ::) dllsearchpath=$dir;;
            *) dllsearchpath="$dllsearchpath:$dir";;
            esac
            case :$dllsearchpath: in
            *":$testbindir:"*) ;;
+           ::) dllsearchpath=$testbindir;;
            *) dllsearchpath="$dllsearchpath:$testbindir";;
            esac
            ;;
- Line 1599  EOF
+ Line 4522  EOF
        -l*)
          if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
            case $host in
-          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
              # These systems don't actually have a C or math library (as such)
              continue
              ;;
- Line 1613  EOF
+ Line 4536  EOF
              ;;
            *-*-rhapsody* | *-*-darwin1.[012])
              # Rhapsody C and math libraries are in the System framework
-            deplibs="$deplibs -framework System"
+            deplibs="$deplibs System.ltframework"
              continue
              ;;
            *-*-sco3.2v5* | *-*-sco5v6*)
- Line 1637  EOF
+ Line 4560  EOF
          continue
          ;;
+       -module)
+         module=yes
+         continue
+         ;;
        # Tru64 UNIX uses -model [arg] to determine the layout of C++
        # classes, name mangling, and exception handling.
-      -model)
+      # Darwin uses the -arch flag to determine output architecture.
-        compile_command="$compile_command $arg"
+      -model|-arch|-isysroot)
          compiler_flags="$compiler_flags $arg"
-        finalize_command="$finalize_command $arg"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
          prev=xcompiler
          continue
          ;;
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
          compiler_flags="$compiler_flags $arg"
-        compile_command="$compile_command $arg"
+        func_append compile_command " $arg"
-        finalize_command="$finalize_command $arg"
+        func_append finalize_command " $arg"
+        case "$new_inherited_linker_flags " in
+            *" $arg "*) ;;
+            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+        esac
          continue
          ;;
- Line 1659  EOF
+ Line 4592  EOF
          continue
          ;;
-       -module)
-         module=yes
-         continue
-         ;;
-       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-       # -r[0-9][0-9]* specifies the processor on the SGI compiler
-       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-       # +DA*, +DD* enable 64-bit mode on the HP compiler
-       # -q* pass through compiler args for the IBM compiler
-       # -m* pass through architecture-specific compiler args for GCC
-       # -m*, -t[45]*, -txscale* pass through architecture-specific
-       # compiler args for GCC
-       # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-       # -F/path gives path to uninstalled frameworks, gcc on darwin
-       # @file GCC response files
-       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-         # Unknown arguments in both finalize_command and compile_command need
-         # to be aesthetically quoted because they are evaled later.
-         arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-         case $arg in
-         *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
-           arg="\"$arg\""
-           ;;
-         esac
-         compile_command="$compile_command $arg"
-         finalize_command="$finalize_command $arg"
-         compiler_flags="$compiler_flags $arg"
-         continue
-         ;;
-       -shrext)
-         prev=shrext
-         continue
-         ;;
        -no-fast-install)
          fast_install=no
          continue
- Line 1704  EOF
+ Line 4599  EOF
        -no-install)
          case $host in
-        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
            # The PATH hackery in wrapper scripts is required on Windows
            # and Darwin in order for the loader to find any dlls it needs.
-          $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+          func_warning "\`-no-install' is ignored for $host"
-          $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+          func_warning "assuming \`-no-fast-install' instead"
            fast_install=no
            ;;
          *) no_install=yes ;;
- Line 1749  EOF
+ Line 4644  EOF
          ;;
        -R*)
-        dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+        func_stripname '-R' '' "$arg"
+        dir=$func_stripname_result
          # We need an absolute path.
          case $dir in
          [\\/]* | [A-Za-z]:[\\/]*) ;;
          *)
-          $echo "$modename: only absolute run-paths are allowed" 1>&2
+          func_fatal_error "only absolute run-paths are allowed"
-          exit $EXIT_FAILURE
            ;;
          esac
          case "$xrpath " in
- Line 1765  EOF
+ Line 4660  EOF
          continue
          ;;
+       -shared)
+         # The effects of -shared are defined in a previous loop.
+         continue
+         ;;
+       -shrext)
+         prev=shrext
+         continue
+         ;;
        -static | -static-libtool-libs)
          # The effects of -static are defined in a previous loop.
          # We used to do the same as -all-static on platforms that
- Line 1783  EOF
+ Line 4688  EOF
          prev=vinfo
          continue
          ;;
        -version-number)
          prev=vinfo
          vinfo_number=yes
          continue
          ;;
+       -weak)
+         prev=weak
+         continue
+         ;;
        -Wc,*)
-        args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+        func_stripname '-Wc,' '' "$arg"
+        args=$func_stripname_result
          arg=
          save_ifs="$IFS"; IFS=','
          for flag in $args; do
            IFS="$save_ifs"
-          case $flag in
+          func_quote_for_eval "$flag"
-            *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+          arg="$arg $wl$func_quote_for_eval_result"
-            flag="\"$flag\""
+          compiler_flags="$compiler_flags $func_quote_for_eval_result"
-            ;;
-          esac
-          arg="$arg $wl$flag"
-          compiler_flags="$compiler_flags $flag"
          done
          IFS="$save_ifs"
-        arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+        func_stripname ' ' '' "$arg"
+        arg=$func_stripname_result
          ;;
        -Wl,*)
-        args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+        func_stripname '-Wl,' '' "$arg"
+        args=$func_stripname_result
          arg=
          save_ifs="$IFS"; IFS=','
          for flag in $args; do
            IFS="$save_ifs"
-          case $flag in
+          func_quote_for_eval "$flag"
-            *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+          arg="$arg $wl$func_quote_for_eval_result"
-            flag="\"$flag\""
+          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-            ;;
+          linker_flags="$linker_flags $func_quote_for_eval_result"
-          esac
-          arg="$arg $wl$flag"
-          compiler_flags="$compiler_flags $wl$flag"
-          linker_flags="$linker_flags $flag"
          done
          IFS="$save_ifs"
-        arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+        func_stripname ' ' '' "$arg"
+        arg=$func_stripname_result
          ;;
        -Xcompiler)
- Line 1841  EOF
+ Line 4748  EOF
          continue
          ;;
+       # -msg_* for osf cc
+       -msg_*)
+         func_quote_for_eval "$arg"
+         arg="$func_quote_for_eval_result"
+         ;;
+       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+       # -r[0-9][0-9]* specifies the processor on the SGI compiler
+       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+       # +DA*, +DD* enable 64-bit mode on the HP compiler
+       # -q* pass through compiler args for the IBM compiler
+       # -m*, -t[45]*, -txscale* pass through architecture-specific
+       # compiler args for GCC
+       # -F/path gives path to uninstalled frameworks, gcc on darwin
+       # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+       # @file GCC response files
+       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+         func_quote_for_eval "$arg"
+         arg="$func_quote_for_eval_result"
+         func_append compile_command " $arg"
+         func_append finalize_command " $arg"
+         compiler_flags="$compiler_flags $arg"
+         continue
+         ;;
        # Some other compiler flag.
        -* | +*)
-        # Unknown arguments in both finalize_command and compile_command need
+        func_quote_for_eval "$arg"
-        # to be aesthetically quoted because they are evaled later.
+        arg="$func_quote_for_eval_result"
-        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-        case $arg in
-        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
-          arg="\"$arg\""
-          ;;
-        esac
          ;;
        *.$objext)
- Line 1862  EOF
+ Line 4789  EOF
          # A libtool-controlled object.
          # Check to see that this really is a libtool object.
-        if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+        if func_lalib_unsafe_p "$arg"; then
            pic_object=
            non_pic_object=
            # Read the .lo file
-          # If there is no directory component, then add one.
+          func_source "$arg"
-          case $arg in
-          */* | *\\*) . $arg ;;
-          *) . ./$arg ;;
-          esac
-          if test -z "$pic_object" || \
+          if test -z "$pic_object" ||
               test -z "$non_pic_object" ||
-             test "$pic_object" = none && \
+             test "$pic_object" = none &&
               test "$non_pic_object" = none; then
-            $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+            func_fatal_error "cannot find name of object for \`$arg'"
-            exit $EXIT_FAILURE
            fi
            # Extract subdirectory from the argument.
-          xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+          func_dirname "$arg" "/" ""
-          if test "X$xdir" = "X$arg"; then
+          xdir="$func_dirname_result"
-            xdir=
-          else
-            xdir="$xdir/"
-          fi
            if test "$pic_object" != none; then
              # Prepend the subdirectory the object is found in.
- Line 1912  EOF
+ Line 4830  EOF
              fi
              # A PIC object.
-            libobjs="$libobjs $pic_object"
+            func_append libobjs " $pic_object"
              arg="$pic_object"
            fi
- Line 1922  EOF
+ Line 4840  EOF
              non_pic_object="$xdir$non_pic_object"
              # A standard non-PIC object
-            non_pic_objects="$non_pic_objects $non_pic_object"
+            func_append non_pic_objects " $non_pic_object"
              if test -z "$pic_object" || test "$pic_object" = none ; then
                arg="$non_pic_object"
              fi
- Line 1930  EOF
+ Line 4848  EOF
              # If the PIC object exists, use it instead.
              # $xdir was prepended to $pic_object above.
              non_pic_object="$pic_object"
-            non_pic_objects="$non_pic_objects $non_pic_object"
+            func_append non_pic_objects " $non_pic_object"
            fi
          else
            # Only an error if not doing a dry-run.
-          if test -z "$run"; then
+          if $opt_dry_run; then
-            $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-            exit $EXIT_FAILURE
-          else
-            # Dry-run case.
              # Extract subdirectory from the argument.
-            xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+            func_dirname "$arg" "/" ""
-            if test "X$xdir" = "X$arg"; then
+            xdir="$func_dirname_result"
-              xdir=
-            else
-              xdir="$xdir/"
-            fi
-            pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+            func_lo2o "$arg"
-            non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+            pic_object=$xdir$objdir/$func_lo2o_result
-            libobjs="$libobjs $pic_object"
+            non_pic_object=$xdir$func_lo2o_result
-            non_pic_objects="$non_pic_objects $non_pic_object"
+            func_append libobjs " $pic_object"
+            func_append non_pic_objects " $non_pic_object"
+          else
+            func_fatal_error "\`$arg' is not a valid libtool object"
            fi
          fi
          ;;
- Line 1984  EOF
+ Line 4896  EOF
        *)
          # Unknown arguments in both finalize_command and compile_command need
          # to be aesthetically quoted because they are evaled later.
-        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+        func_quote_for_eval "$arg"
-        case $arg in
+        arg="$func_quote_for_eval_result"
-        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
-          arg="\"$arg\""
-          ;;
-        esac
          ;;
        esac # arg
        # Now actually substitute the argument into the commands.
        if test -n "$arg"; then
-        compile_command="$compile_command $arg"
+        func_append compile_command " $arg"
-        finalize_command="$finalize_command $arg"
+        func_append finalize_command " $arg"
        fi
      done # argument parsing loop
-    if test -n "$prev"; then
+    test -n "$prev" && \
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      func_fatal_help "the \`$prevarg' option requires an argument"
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
      if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
        eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
+      func_append compile_command " $arg"
-      finalize_command="$finalize_command $arg"
+      func_append finalize_command " $arg"
      fi
      oldlibs=
      # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    func_basename "$output"
+    outputname="$func_basename_result"
      libobjs_save="$libobjs"
      if test -n "$shlibpath_var"; then
        # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
      else
        shlib_search_path=
      fi
      eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
      eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    func_dirname "$output" "/" ""
-    if test "X$output_objdir" = "X$output"; then
+    output_objdir="$func_dirname_result$objdir"
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
      # Create the object directory.
-    if test ! -d "$output_objdir"; then
+    func_mkdir_p "$output_objdir"
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-        exit $exit_status
-      fi
-    fi
      # Determine the type of output
      case $output in
      "")
-      $echo "$modename: you must specify an output file" 1>&2
+      func_fatal_help "you must specify an output file"
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
        ;;
      *.$libext) linkmode=oldlib ;;
      *.lo | *.$objext) linkmode=obj ;;
- Line 2055  EOF
+ Line 4948  EOF
      *) linkmode=prog ;; # Anything else should be a program.
      esac
-     case $host in
-     *cygwin* | *mingw* | *pw32*)
-       # don't eliminate duplications in $postdeps and $predeps
-       duplicate_compiler_generated_deps=yes
-       ;;
-     *)
-       duplicate_compiler_generated_deps=$duplicate_deps
-       ;;
-     esac
      specialdeplibs=
      libs=
      # Find all interdependent deplibs by searching for libraries
      # that are linked more than once (e.g. -la -lb -la)
      for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
+      if $opt_duplicate_deps ; then
          case "$libs " in
          *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
          esac
- Line 2085  EOF
+ Line 4969  EOF
        # $postdeps and mark them as special (i.e., whose duplicates are
        # not to be eliminated).
        pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+      if $opt_duplicate_compiler_generated_deps; then
          for pre_post_dep in $predeps $postdeps; do
            case "$pre_post_deps " in
            *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
- Line 2101  EOF
+ Line 4985  EOF
      newlib_search_path=
      need_relink=no # whether we're linking any uninstalled libtool libraries
      notinst_deplibs= # not-installed libtool libraries
+     notinst_path= # paths that contain not-installed libtool libraries
      case $linkmode in
      lib)
-        passes="conv link"
+        passes="conv dlpreopen link"
          for file in $dlfiles $dlprefiles; do
            case $file in
            *.la) ;;
            *)
-            $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-            exit $EXIT_FAILURE
              ;;
            esac
          done
- Line 2125  EOF
+ Line 5010  EOF
      *)  passes="conv"
          ;;
      esac
      for pass in $passes; do
+       # The preopen pass in lib mode reverses $deplibs; put it back here
+       # so that -L comes before libs that need it for instance...
+       if test "$linkmode,$pass" = "lib,link"; then
+         ## FIXME: Find the place where the list is rebuilt in the wrong
+         ##        order, and fix it there properly
+         tmp_deplibs=
+         for deplib in $deplibs; do
+           tmp_deplibs="$deplib $tmp_deplibs"
+         done
+         deplibs="$tmp_deplibs"
+       fi
        if test "$linkmode,$pass" = "lib,link" ||
           test "$linkmode,$pass" = "prog,scan"; then
          libs="$deplibs"
- Line 2141  EOF
+ Line 5039  EOF
            ;;
          esac
        fi
+       if test "$linkmode,$pass" = "lib,dlpreopen"; then
+         # Collect and forward deplibs of preopened libtool libs
+         for lib in $dlprefiles; do
+           # Ignore non-libtool-libs
+           dependency_libs=
+           case $lib in
+           *.la) func_source "$lib" ;;
+           esac
+           # Collect preopened libtool deplibs, except any this library
+           # has declared as weak libs
+           for deplib in $dependency_libs; do
+             deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+             case " $weak_libs " in
+             *" $deplib_base "*) ;;
+             *) deplibs="$deplibs $deplib" ;;
+             esac
+           done
+         done
+         libs="$dlprefiles"
+       fi
        if test "$pass" = dlopen; then
          # Collect dlpreopened libraries
          save_deplibs="$deplibs"
          deplibs=
        fi
        for deplib in $libs; do
          lib=
          found=no
- Line 2156  EOF
+ Line 5076  EOF
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              compiler_flags="$compiler_flags $deplib"
+             if test "$linkmode" = lib ; then
+                 case "$new_inherited_linker_flags " in
+                     *" $deplib "*) ;;
+                     * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+                 esac
+             fi
            fi
            continue
            ;;
          -l*)
            if test "$linkmode" != lib && test "$linkmode" != prog; then
-            $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+            func_warning "\`-l' is ignored for archives/objects"
              continue
            fi
-          name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+          func_stripname '-l' '' "$deplib"
+          name=$func_stripname_result
            if test "$linkmode" = lib; then
              searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
            else
- Line 2200  EOF
+ Line 5127  EOF
              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                case " $predeps $postdeps " in
                *" $deplib "*)
-                if (${SED} -e '2q' $lib |
+                if func_lalib_p "$lib"; then
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
                    library_names=
                    old_library=
-                  case $lib in
+                  func_source "$lib"
-                  */* | *\\*) . $lib ;;
-                  *) . ./$lib ;;
-                  esac
                    for l in $old_library $library_names; do
                      ll="$l"
                    done
                    if test "X$ll" = "X$old_library" ; then # only static version available
                      found=no
-                    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+                    func_dirname "$lib" "" "."
-                    test "X$ladir" = "X$lib" && ladir="."
+                    ladir="$func_dirname_result"
                      lib=$ladir/$old_library
                      if test "$linkmode,$pass" = "prog,link"; then
                        compile_deplibs="$deplib $compile_deplibs"
- Line 2226  EOF
+ Line 5149  EOF
                      continue
                    fi
                  fi
                 ;;
                *) ;;
                esac
              fi
            fi
            ;; # -l
+         *.ltframework)
+           if test "$linkmode,$pass" = "prog,link"; then
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           else
+             deplibs="$deplib $deplibs"
+             if test "$linkmode" = lib ; then
+                 case "$new_inherited_linker_flags " in
+                     *" $deplib "*) ;;
+                     * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+                 esac
+             fi
+           fi
+           continue
+           ;;
          -L*)
            case $linkmode in
            lib)
              deplibs="$deplib $deplibs"
              test "$pass" = conv && continue
              newdependency_libs="$deplib $newdependency_libs"
-            newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+            func_stripname '-L' '' "$deplib"
+            newlib_search_path="$newlib_search_path $func_stripname_result"
              ;;
            prog)
              if test "$pass" = conv; then
- Line 2251  EOF
+ Line 5190  EOF
                compile_deplibs="$deplib $compile_deplibs"
                finalize_deplibs="$deplib $finalize_deplibs"
              fi
-            newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+            func_stripname '-L' '' "$deplib"
+            newlib_search_path="$newlib_search_path $func_stripname_result"
              ;;
            *)
-            $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+            func_warning "\`-L' is ignored for archives/objects"
              ;;
            esac # linkmode
            continue
            ;; # -L
          -R*)
            if test "$pass" = link; then
-            dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+            func_stripname '-R' '' "$deplib"
+            dir=$func_stripname_result
              # Make sure the xrpath contains only unique directories.
              case "$xrpath " in
              *" $dir "*) ;;
- Line 2279  EOF
+ Line 5220  EOF
            fi
            case $linkmode in
            lib)
-            valid_a_lib=no
+            # Linking convenience modules into shared libraries is allowed,
             # but linking other static libraries is non-portable.
             case " $dlpreconveniencelibs " in
             *" $deplib "*) ;;
-                match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+            *)
-                if eval $echo \"$deplib\" 2>/dev/null \
+              valid_a_lib=no
-                    | $SED 10q \
+              case $deplibs_check_method in
+                match_pattern*)
+                  set dummy $deplibs_check_method; shift
+                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
                      | $EGREP "$match_pattern_regex" > /dev/null; then
+                     valid_a_lib=yes
+                   fi
+                 ;;
+                 pass_all)
                    valid_a_lib=yes
-                 fi
                  ;;
-              pass_all)
+              esac
-                valid_a_lib=yes
+              if test "$valid_a_lib" != yes; then
-                ;;
+                $ECHO
                 $ECHO "*** Warning: Trying to link with static lib archive $deplib."
                 $ECHO "*** I have the capability to make that library automatically link in when"
-              $echo
+                $ECHO "*** you link to this library.  But I can only do this if you have a"
-              $echo "*** Warning: Trying to link with static lib archive $deplib."
+                $ECHO "*** shared version of the library, which you do not appear to have"
-              $echo "*** I have the capability to make that library automatically link in when"
+                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
-              $echo "*** you link to this library.  But I can only do this if you have a"
+                $ECHO "*** that it is just a static archive that I should not use here."
-              $echo "*** shared version of the library, which you do not appear to have"
+              else
-              $echo "*** because the file extensions .$libext of this argument makes me believe"
+                $ECHO
-              $echo "*** that it is just a static archive that I should not used here."
+                $ECHO "*** Warning: Linking the shared library $output against the"
                 $ECHO "*** static library $deplib is not portable!"
-              $echo
+                deplibs="$deplib $deplibs"
-              $echo "*** Warning: Linking the shared library $output against the"
+              fi
-              $echo "*** static library $deplib is not portable!"
+              ;;
             esac
-            fi
              continue
              ;;
            prog)
- Line 2342  EOF
+ Line 5289  EOF
            continue
            ;;
          esac # case $deplib
          if test "$found" = yes || test -f "$lib"; then :
          else
-          $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-          exit $EXIT_FAILURE
          fi
          # Check to see that this really is a libtool archive.
-        if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+        func_lalib_unsafe_p "$lib" \
-        else
+          || func_fatal_error "\`$lib' is not a valid libtool archive"
-          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-          exit $EXIT_FAILURE
-        fi
-        ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+        func_dirname "$lib" "" "."
-        test "X$ladir" = "X$lib" && ladir="."
+        ladir="$func_dirname_result"
          dlname=
          dlopen=
- Line 2364  EOF
+ Line 5308  EOF
          libdir=
          library_names=
          old_library=
+         inherited_linker_flags=
          # If the library was installed with an old release of libtool,
          # it will not redefine variables installed, or shouldnotlink
          installed=yes
- Line 2372  EOF
+ Line 5317  EOF
          # Read the .la file
-        case $lib in
+        func_source "$lib"
-        */* | *\\*) . $lib ;;
-        *) . ./$lib ;;
-        esac
+         # Convert "-framework foo" to "foo.ltframework"
+         if test -n "$inherited_linker_flags"; then
+           tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+           for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+             case " $new_inherited_linker_flags " in
+               *" $tmp_inherited_linker_flag "*) ;;
+               *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+             esac
+           done
+         fi
+         dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
          if test "$linkmode,$pass" = "lib,link" ||
             test "$linkmode,$pass" = "prog,scan" ||
             { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- Line 2389  EOF
+ Line 5342  EOF
            deplibs="$lib $deplibs"
            if test -z "$libdir"; then
              if test -z "$old_library"; then
-              $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+              func_fatal_error "cannot find name of link library for \`$lib'"
-              exit $EXIT_FAILURE
              fi
              # It is a libtool convenience library, so add in its objects.
              convenience="$convenience $ladir/$objdir/$old_library"
- Line 2398  EOF
+ Line 5350  EOF
              tmp_libs=
              for deplib in $dependency_libs; do
                deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
+              if $opt_duplicate_deps ; then
                 case "$tmp_libs " in
                 *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                 esac
               fi
                tmp_libs="$tmp_libs $deplib"
              done
            elif test "$linkmode" != prog && test "$linkmode" != lib; then
-            $echo "$modename: \`$lib' is not a convenience library" 1>&2
+            func_fatal_error "\`$lib' is not a convenience library"
-            exit $EXIT_FAILURE
            fi
            continue
          fi # $pass = conv
- Line 2419  EOF
+ Line 5370  EOF
            linklib="$l"
          done
          if test -z "$linklib"; then
-          $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+          func_fatal_error "cannot find name of link library for \`$lib'"
-          exit $EXIT_FAILURE
          fi
          # This library was specified with -dlopen.
          if test "$pass" = dlopen; then
            if test -z "$libdir"; then
-            $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-            exit $EXIT_FAILURE
            fi
            if test -z "$dlname" ||
               test "$dlopen_support" != yes ||
- Line 2449  EOF
+ Line 5398  EOF
          *)
            abs_ladir=`cd "$ladir" && pwd`
            if test -z "$abs_ladir"; then
-            $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+            func_warning "cannot determine absolute directory name of \`$ladir'"
-            $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+            func_warning "passing it literally to the linker, although it might fail"
              abs_ladir="$ladir"
            fi
            ;;
          esac
-        laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+        func_basename "$lib"
+        laname="$func_basename_result"
          # Find the relevant object directory and library name.
          if test "X$installed" = Xyes; then
            if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-            $echo "$modename: warning: library \`$lib' was moved." 1>&2
+            func_warning "library \`$lib' was moved."
              dir="$ladir"
              absdir="$abs_ladir"
              libdir="$abs_ladir"
- Line 2482  EOF
+ Line 5432  EOF
              notinst_path="$notinst_path $abs_ladir"
            fi
          fi # $installed = yes
-        name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+        func_stripname 'lib' '.la' "$laname"
+        name=$func_stripname_result
          # This library was specified with -dlpreopen.
          if test "$pass" = dlpreopen; then
-          if test -z "$libdir"; then
+          if test -z "$libdir" && test "$linkmode" = prog; then
-            $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-            exit $EXIT_FAILURE
            fi
            # Prefer using a static library (so that no silly _DYNAMIC symbols
            # are required to link).
            if test -n "$old_library"; then
              newdlprefiles="$newdlprefiles $dir/$old_library"
+             # Keep a list of preopened convenience libraries to check
+             # that they are being used correctly in the link pass.
+             test -z "$libdir" && \
+                 dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
            # Otherwise, use the dlname, so that lt_dlopen finds it.
            elif test -n "$dlname"; then
              newdlprefiles="$newdlprefiles $dir/$dlname"
- Line 2529  EOF
+ Line 5483  EOF
            tmp_libs=
            for deplib in $dependency_libs; do
              case $deplib in
-            -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+            -L*) func_stripname '-L' '' "$deplib"
+                 newlib_search_path="$newlib_search_path $func_stripname_result"
+                 ;;
              esac
              # Need to link against all dependency_libs?
              if test "$linkalldeplibs" = yes; then
- Line 2539  EOF
+ Line 5495  EOF
                # or/and link against static libraries
                newdependency_libs="$deplib $newdependency_libs"
              fi
-            if test "X$duplicate_deps" = "Xyes" ; then
+            if $opt_duplicate_deps ; then
                case "$tmp_libs " in
                *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                esac
- Line 2552  EOF
+ Line 5508  EOF
          if test "$linkmode,$pass" = "prog,link"; then
            if test -n "$library_names" &&
               { { test "$prefer_static_libs" = no ||
                  test "$prefer_static_libs,$installed" = "built,yes"; } ||
                 test -z "$old_library"; }; then
              # We need to hardcode the library path
              if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
                # Make sure the rpath contains only unique directories.
-              case "$temp_rpath " in
+              case "$temp_rpath:" in
-              *" $dir "*) ;;
+              *"$absdir:"*) ;;
-              *" $absdir "*) ;;
+              *) temp_rpath="$temp_rpath$absdir:" ;;
-              *) temp_rpath="$temp_rpath $absdir" ;;
                esac
              fi
- Line 2598  EOF
+ Line 5553  EOF
          link_static=no # Whether the deplib will be linked statically
          use_static_libs=$prefer_static_libs
-        if test "$use_static_libs" = built && test "$installed" = yes ; then
+        if test "$use_static_libs" = built && test "$installed" = yes; then
            use_static_libs=no
          fi
          if test -n "$library_names" &&
             { test "$use_static_libs" = no || test -z "$old_library"; }; then
-          if test "$installed" = no; then
+          case $host in
           *cygwin* | *mingw* | *cegcc*)
               # No point in relinking DLLs because paths are not encoded
-          fi
+              notinst_deplibs="$notinst_deplibs $lib"
+              need_relink=no
+            ;;
+          *)
+            if test "$installed" = no; then
+              notinst_deplibs="$notinst_deplibs $lib"
+              need_relink=yes
+            fi
+            ;;
+          esac
            # This is a shared library
-          # Warn about portability, can't link against -module's on
+          # Warn about portability, can't link against -module's on some
-          # some systems (darwin)
+          # systems (darwin).  Don't bleat about dlopened modules though!
-          if test "$shouldnotlink" = yes && test "$pass" = link ; then
+          dlopenmodule=""
-            $echo
+          for dlpremoduletest in $dlprefiles; do
+            if test "X$dlpremoduletest" = "X$lib"; then
+              dlopenmodule="$dlpremoduletest"
+              break
+            fi
+          done
+          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+            $ECHO
              if test "$linkmode" = prog; then
-              $echo "*** Warning: Linking the executable $output against the loadable module"
+              $ECHO "*** Warning: Linking the executable $output against the loadable module"
              else
-              $echo "*** Warning: Linking the shared library $output against the loadable module"
+              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
              fi
-            $echo "*** $linklib is not portable!"
+            $ECHO "*** $linklib is not portable!"
            fi
            if test "$linkmode" = lib &&
               test "$hardcode_into_libs" = yes; then
- Line 2648  EOF
+ Line 5619  EOF
            if test -n "$old_archive_from_expsyms_cmds"; then
              # figure out the soname
              set dummy $library_names
-            realname="$2"
+            shift
-            shift; shift
+            realname="$1"
-            libname=`eval \\$echo \"$libname_spec\"`
+            shift
+            libname=`eval "\\$ECHO \"$libname_spec\""`
              # use dlname if we got it. it's perfectly good, no?
              if test -n "$dlname"; then
                soname="$dlname"
              elif test -n "$soname_spec"; then
                # bleh windows
                case $host in
-              *cygwin* | mingw*)
+              *cygwin* | mingw* | *cegcc*)
-                major=`expr $current - $age`
+                func_arith $current - $age
+                major=$func_arith_result
                  versuffix="-$major"
                  ;;
                esac
- Line 2669  EOF
+ Line 5642  EOF
              # Make a new name for the extract_expsyms_cmds to use
              soroot="$soname"
-            soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+            func_basename "$soroot"
-            newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+            soname="$func_basename_result"
+            func_stripname 'lib' '.dll' "$soname"
+            newlib=libimp-$func_stripname_result.a
              # If the library has no export list, then create one now
              if test -f "$output_objdir/$soname-def"; then :
              else
-              $show "extracting exported symbol list from \`$soname'"
+              func_verbose "extracting exported symbol list from \`$soname'"
-              save_ifs="$IFS"; IFS='~'
+              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-              cmds=$extract_expsyms_cmds
-              for cmd in $cmds; do
-                IFS="$save_ifs"
-                eval cmd=\"$cmd\"
-                $show "$cmd"
-                $run eval "$cmd" || exit $?
-              done
-              IFS="$save_ifs"
              fi
              # Create $newlib
              if test -f "$output_objdir/$newlib"; then :; else
-              $show "generating import library for \`$soname'"
+              func_verbose "generating import library for \`$soname'"
-              save_ifs="$IFS"; IFS='~'
+              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-              cmds=$old_archive_from_expsyms_cmds
-              for cmd in $cmds; do
-                IFS="$save_ifs"
-                eval cmd=\"$cmd\"
-                $show "$cmd"
-                $run eval "$cmd" || exit $?
-              done
-              IFS="$save_ifs"
              fi
              # make sure the library variables are pointing to the new library
              dir=$output_objdir
- Line 2720  EOF
+ Line 5679  EOF
                    *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
                      *-*-unixware7*) add_dir="-L$dir" ;;
                    *-*-darwin* )
-                    # if the lib is a module then we can not link against
+                    # if the lib is a (non-dlopened) module then we can not
-                    # it, someone is ignoring the new warnings I added
+                    # link against it, someone is ignoring the earlier warnings
                      if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
+                         $GREP ": [^:]* bundle" >/dev/null ; then
-                      $echo "** Warning, lib $linklib is a module, not a shared library"
+                      if test "X$dlopenmodule" != "X$lib"; then
                         $ECHO "*** Warning: lib $linklib is a module, not a shared library"
-                        $echo
+                        if test -z "$old_library" ; then
-                        $echo "** And there doesn't seem to be a static archive available"
+                          $ECHO
-                        $echo "** The link will probably fail, sorry"
+                          $ECHO "*** And there doesn't seem to be a static archive available"
                           $ECHO "*** The link will probably fail, sorry"
-                        add="$dir/$old_library"
+                        else
+                          add="$dir/$old_library"
+                        fi
+                      elif test -n "$old_library"; then
+                        add="$dir/$old_library"
                        fi
                      fi
                  esac
- Line 2748  EOF
+ Line 5711  EOF
                fi
                ;;
              relink)
-              if test "$hardcode_direct" = yes; then
+              if test "$hardcode_direct" = yes &&
+                 test "$hardcode_direct_absolute" = no; then
                  add="$dir/$linklib"
                elif test "$hardcode_minus_L" = yes; then
                  add_dir="-L$dir"
- Line 2772  EOF
+ Line 5736  EOF
              esac
              if test "$lib_linked" != yes; then
-              $echo "$modename: configuration error: unsupported hardcode properties"
+              func_fatal_configuration "unsupported hardcode properties"
-              exit $EXIT_FAILURE
              fi
              if test -n "$add_shlibpath"; then
- Line 2788  EOF
+ Line 5751  EOF
              else
                test -n "$add_dir" && deplibs="$add_dir $deplibs"
                test -n "$add" && deplibs="$add $deplibs"
-              if test "$hardcode_direct" != yes && \
+              if test "$hardcode_direct" != yes &&
-                 test "$hardcode_minus_L" != yes && \
+                 test "$hardcode_minus_L" != yes &&
                   test "$hardcode_shlibpath_var" = yes; then
                  case :$finalize_shlibpath: in
                  *":$libdir:"*) ;;
- Line 2804  EOF
+ Line 5767  EOF
              add_dir=
              add=
              # Finalize command for both is simple: just hardcode it.
-            if test "$hardcode_direct" = yes; then
+            if test "$hardcode_direct" = yes &&
+               test "$hardcode_direct_absolute" = no; then
                add="$libdir/$linklib"
              elif test "$hardcode_minus_L" = yes; then
                add_dir="-L$libdir"
- Line 2818  EOF
+ Line 5782  EOF
              elif test "$hardcode_automatic" = yes; then
                if test -n "$inst_prefix_dir" &&
                   test -f "$inst_prefix_dir$libdir/$linklib" ; then
                 add="$inst_prefix_dir$libdir/$linklib"
                else
                 add="$libdir/$linklib"
                fi
              else
                # We cannot seem to hardcode it, guess we'll fake it.
- Line 2864  EOF
+ Line 5828  EOF
              # Just print a warning and add the library to dependency_libs so
              # that the program can be linked against the static library.
-            $echo
+            $ECHO
-            $echo "*** Warning: This system can not link to static lib archive $lib."
+            $ECHO "*** Warning: This system can not link to static lib archive $lib."
-            $echo "*** I have the capability to make that library automatically link in when"
+            $ECHO "*** I have the capability to make that library automatically link in when"
-            $echo "*** you link to this library.  But I can only do this if you have a"
+            $ECHO "*** you link to this library.  But I can only do this if you have a"
-            $echo "*** shared version of the library, which you do not appear to have."
+            $ECHO "*** shared version of the library, which you do not appear to have."
              if test "$module" = yes; then
-              $echo "*** But as you try to build a module library, libtool will still create "
+              $ECHO "*** But as you try to build a module library, libtool will still create "
-              $echo "*** a static module, that should work as long as the dlopening application"
+              $ECHO "*** a static module, that should work as long as the dlopening application"
-              $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
                if test -z "$global_symbol_pipe"; then
-                $echo
+                $ECHO
-                $echo "*** However, this would only work if libtool was able to extract symbol"
+                $ECHO "*** However, this would only work if libtool was able to extract symbol"
-                $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-                $echo "*** not find such a program.  So, this module is probably useless."
+                $ECHO "*** not find such a program.  So, this module is probably useless."
-                $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
                fi
                if test "$build_old_libs" = no; then
                  build_libtool_libs=module
- Line 2902  EOF
+ Line 5866  EOF
              temp_deplibs=
              for libdir in $dependency_libs; do
                case $libdir in
-              -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+              -R*) func_stripname '-R' '' "$libdir"
+                   temp_xrpath=$func_stripname_result
                     case " $xrpath " in
                     *" $temp_xrpath "*) ;;
                     *) xrpath="$xrpath $temp_xrpath";;
- Line 2920  EOF
+ Line 5885  EOF
            tmp_libs=
            for deplib in $dependency_libs; do
              newdependency_libs="$deplib $newdependency_libs"
-            if test "X$duplicate_deps" = "Xyes" ; then
+            if $opt_duplicate_deps ; then
                case "$tmp_libs " in
                *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                esac
- Line 2931  EOF
+ Line 5896  EOF
            if test "$link_all_deplibs" != no; then
              # Add the search paths of all dependency libraries
              for deplib in $dependency_libs; do
+               path=
                case $deplib in
                -L*) path="$deplib" ;;
                *.la)
-                dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+                func_dirname "$deplib" "" "."
-                test "X$dir" = "X$deplib" && dir="."
+                dir="$func_dirname_result"
                  # We need an absolute path.
                  case $dir in
                  [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
                  *)
                    absdir=`cd "$dir" && pwd`
                    if test -z "$absdir"; then
-                    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+                    func_warning "cannot determine absolute directory name of \`$dir'"
                      absdir="$dir"
                    fi
                    ;;
                  esac
-                if grep "^installed=no" $deplib > /dev/null; then
+                if $GREP "^installed=no" $deplib > /dev/null; then
-                  path="$absdir/$objdir"
-                else
-                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-                  if test -z "$libdir"; then
-                    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-                    exit $EXIT_FAILURE
-                  fi
-                  if test "$absdir" != "$libdir"; then
-                    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-                  fi
-                  path="$absdir"
-                fi
-                depdepl=
                  case $host in
                  *-*-darwin*)
-                  # we do not want to link against static libs,
+                  depdepl=
-                  # but need to link against shared
                    eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-                   eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                    if test -n "$deplibrary_names" ; then
                      for tmp in $deplibrary_names ; do
                        depdepl=$tmp
                      done
-                    if test -f "$deplibdir/$depdepl" ; then
+                    if test -f "$absdir/$objdir/$depdepl" ; then
-                      depdepl="$deplibdir/$depdepl"
+                      depdepl="$absdir/$objdir/$depdepl"
-                    elif test -f "$path/$depdepl" ; then
+                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-                      depdepl="$path/$depdepl"
+                      if test -z "$darwin_install_name"; then
-                    else
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
-                      # Can't find it, oh well...
+                      fi
-                      depdepl=
+                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+                      path=
                      fi
-                     # do not add paths which are already there
-                     case " $newlib_search_path " in
-                     *" $path "*) ;;
-                     *) newlib_search_path="$newlib_search_path $path";;
-                     esac
                    fi
-                   path=""
                    ;;
                  *)
-                  path="-L$path"
+                  path="-L$absdir/$objdir"
                    ;;
                  esac
+                 else
+                   eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+                   test -z "$libdir" && \
+                     func_fatal_error "\`$deplib' is not a valid libtool archive"
+                   test "$absdir" != "$libdir" && \
+                     func_warning "\`$deplib' seems to be moved"
+                   path="-L$absdir"
+                 fi
                  ;;
-               -l*)
-                 case $host in
-                 *-*-darwin*)
-                   # Again, we only want to link against shared libraries
-                   eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-                   for tmp in $newlib_search_path ; do
-                     if test -f "$tmp/lib$tmp_libs.dylib" ; then
-                       eval depdepl="$tmp/lib$tmp_libs.dylib"
-                       break
-                     fi
-                   done
-                   path=""
-                   ;;
-                 *) continue ;;
-                 esac
-                 ;;
-               *) continue ;;
                esac
                case " $deplibs " in
                *" $path "*) ;;
                *) deplibs="$path $deplibs" ;;
                esac
-               case " $deplibs " in
-               *" $depdepl "*) ;;
-               *) deplibs="$depdepl $deplibs" ;;
-               esac
              done
            fi # link_all_deplibs != no
          fi # linkmode = lib
        done # for deplib in $libs
+       if test "$pass" = link; then
+         if test "$linkmode" = "prog"; then
+           compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+           finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+         else
+           compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+         fi
+       fi
        dependency_libs="$newdependency_libs"
        if test "$pass" = dlpreopen; then
          # Link the dlpreopened libraries before other libraries
- Line 3120  EOF
+ Line 6063  EOF
      done # for pass
      if test "$linkmode" = prog; then
        dlfiles="$newdlfiles"
+     fi
+     if test "$linkmode" = prog || test "$linkmode" = lib; then
        dlprefiles="$newdlprefiles"
      fi
      case $linkmode in
      oldlib)
+       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+         func_warning "\`-dlopen' is ignored for archives"
+       fi
        case " $deplibs" in
        *\ -l* | *\ -L*)
-        $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+        func_warning "\`-l' and \`-L' are ignored for archives" ;;
        esac
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      test -n "$rpath" && \
-        $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+        func_warning "\`-rpath' is ignored for archives"
-      fi
-      if test -n "$rpath"; then
+      test -n "$xrpath" && \
-        $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+        func_warning "\`-R' is ignored for archives"
-      fi
-      if test -n "$xrpath"; then
+      test -n "$vinfo" && \
-        $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+        func_warning "\`-version-info/-version-number' is ignored for archives"
-      fi
-      if test -n "$vinfo"; then
+      test -n "$release" && \
-        $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+        func_warning "\`-release' is ignored for archives"
-      fi
-      if test -n "$release"; then
+      test -n "$export_symbols$export_symbols_regex" && \
-        $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+        func_warning "\`-export-symbols' is ignored for archives"
-      fi
-       if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-         $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-       fi
        # Now set the variables for building old libraries.
        build_libtool_libs=no
        oldlibs="$output"
- Line 3164  EOF
+ Line 6104  EOF
        # Make sure we only generate libraries of the form `libNAME.la'.
        case $outputname in
        lib*)
-        name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+        func_stripname 'lib' '.la' "$outputname"
+        name=$func_stripname_result
          eval shared_ext=\"$shrext_cmds\"
          eval libname=\"$libname_spec\"
          ;;
        *)
-        if test "$module" = no; then
+        test "$module" = no && \
-          $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+          func_fatal_help "libtool library \`$output' must begin with \`lib'"
           $echo "$help" 1>&2
-          exit $EXIT_FAILURE
-        fi
          if test "$need_lib_prefix" != no; then
            # Add the "lib" prefix for modules if required
-          name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+          func_stripname '' '.la' "$outputname"
+          name=$func_stripname_result
            eval shared_ext=\"$shrext_cmds\"
            eval libname=\"$libname_spec\"
          else
-          libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+          func_stripname '' '.la' "$outputname"
+          libname=$func_stripname_result
          fi
          ;;
        esac
        if test -n "$objs"; then
          if test "$deplibs_check_method" != pass_all; then
-          $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-          exit $EXIT_FAILURE
          else
-          $echo
+          $ECHO
-          $echo "*** Warning: Linking the shared library $output against the non-libtool"
+          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-          $echo "*** objects $objs is not portable!"
+          $ECHO "*** objects $objs is not portable!"
            libobjs="$libobjs $objs"
          fi
        fi
-      if test "$dlself" != no; then
+      test "$dlself" != no && \
-        $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+        func_warning "\`-dlopen self' is ignored for libtool libraries"
-      fi
        set dummy $rpath
-      if test "$#" -gt 2; then
+      shift
-        $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      test "$#" -gt 1 && \
-      fi
+        func_warning "ignoring multiple \`-rpath's for a libtool library"
-      install_libdir="$2"
+       install_libdir="$1"
        oldlibs=
        if test -z "$rpath"; then
          if test "$build_libtool_libs" = yes; then
- Line 3219  EOF
+ Line 6159  EOF
            build_old_libs=yes
          fi
-        if test -n "$vinfo"; then
+        test -n "$vinfo" && \
-          $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-        fi
-        if test -n "$release"; then
+        test -n "$release" && \
-          $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+          func_warning "\`-release' is ignored for convenience libraries"
-        fi
        else
          # Parse the version information argument.
          save_ifs="$IFS"; IFS=':'
          set dummy $vinfo 0 0 0
+         shift
          IFS="$save_ifs"
-        if test -n "$8"; then
+        test -n "$7" && \
-          $echo "$modename: too many parameters to \`-version-info'" 1>&2
+          func_fatal_help "too many parameters to \`-version-info'"
-          $echo "$help" 1>&2
-          exit $EXIT_FAILURE
-        fi
          # convert absolute version numbers to libtool ages
          # this retains compatibility with .la files and attempts
- Line 3245  EOF
+ Line 6181  EOF
          case $vinfo_number in
          yes)
-          number_major="$2"
+          number_major="$1"
-          number_minor="$3"
+          number_minor="$2"
-          number_revision="$4"
+          number_revision="$3"
            #
            # There are really only two kinds -- those that
            # use the current revision as the major version
- Line 3257  EOF
+ Line 6193  EOF
            #
            case $version_type in
            darwin|linux|osf|windows|none)
-            current=`expr $number_major + $number_minor`
+            func_arith $number_major + $number_minor
+            current=$func_arith_result
              age="$number_minor"
              revision="$number_revision"
              ;;
- Line 3267  EOF
+ Line 6204  EOF
              age="0"
              ;;
            irix|nonstopux)
-            current=`expr $number_major + $number_minor`
+            func_arith $number_major + $number_minor
+            current=$func_arith_result
              age="$number_minor"
              revision="$number_minor"
              lt_irix_increment=no
              ;;
            *)
-            $echo "$modename: unknown library version type \`$version_type'" 1>&2
+            func_fatal_configuration "$modename: unknown library version type \`$version_type'"
-            $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-            exit $EXIT_FAILURE
              ;;
            esac
            ;;
          no)
-          current="$2"
+          current="$1"
-          revision="$3"
+          revision="$2"
-          age="$4"
+          age="$3"
            ;;
          esac
- Line 3290  EOF
+ Line 6226  EOF
          case $current in
 |[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
          *)
-          $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+          func_error "CURRENT \`$current' must be a nonnegative integer"
-          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+          func_fatal_error "\`$vinfo' is not valid version information"
-          exit $EXIT_FAILURE
            ;;
          esac
          case $revision in
 |[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
          *)
-          $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+          func_error "REVISION \`$revision' must be a nonnegative integer"
-          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+          func_fatal_error "\`$vinfo' is not valid version information"
-          exit $EXIT_FAILURE
            ;;
          esac
          case $age in
 |[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
          *)
-          $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+          func_error "AGE \`$age' must be a nonnegative integer"
-          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+          func_fatal_error "\`$vinfo' is not valid version information"
-          exit $EXIT_FAILURE
            ;;
          esac
          if test "$age" -gt "$current"; then
-          $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+          func_error "AGE \`$age' is greater than the current interface number \`$current'"
-          $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+          func_fatal_error "\`$vinfo' is not valid version information"
-          exit $EXIT_FAILURE
          fi
          # Calculate the version variables.
- Line 3330  EOF
+ Line 6262  EOF
          darwin)
            # Like Linux, but with the current version available in
            # verstring for coding it into the library header
-          major=.`expr $current - $age`
+          func_arith $current - $age
+          major=.$func_arith_result
            versuffix="$major.$age.$revision"
            # Darwin ld doesn't like 0 for these options...
-          minor_current=`expr $current + 1`
+          func_arith $current + 1
+          minor_current=$func_arith_result
            xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
            verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
            ;;
- Line 3345  EOF
+ Line 6279  EOF
          freebsd-elf)
            major=".$current"
-          versuffix=".$current";
+          versuffix=".$current"
            ;;
          irix | nonstopux)
            if test "X$lt_irix_increment" = "Xno"; then
-            major=`expr $current - $age`
+            func_arith $current - $age
            else
-            major=`expr $current - $age + 1`
+            func_arith $current - $age + 1
            fi
+           major=$func_arith_result
            case $version_type in
              nonstopux) verstring_prefix=nonstopux ;;
              *)         verstring_prefix=sgi ;;
- Line 3363  EOF
+ Line 6299  EOF
            # Add in all the interfaces that we are compatible with.
            loop=$revision
            while test "$loop" -ne 0; do
-            iface=`expr $revision - $loop`
+            func_arith $revision - $loop
-            loop=`expr $loop - 1`
+            iface=$func_arith_result
+            func_arith $loop - 1
+            loop=$func_arith_result
              verstring="$verstring_prefix$major.$iface:$verstring"
            done
- Line 3374  EOF
+ Line 6312  EOF
            ;;
          linux)
-          major=.`expr $current - $age`
+          func_arith $current - $age
+          major=.$func_arith_result
            versuffix="$major.$age.$revision"
            ;;
          osf)
-          major=.`expr $current - $age`
+          func_arith $current - $age
+          major=.$func_arith_result
            versuffix=".$current.$age.$revision"
            verstring="$current.$age.$revision"
            # Add in all the interfaces that we are compatible with.
            loop=$age
            while test "$loop" -ne 0; do
-            iface=`expr $current - $loop`
+            func_arith $current - $loop
-            loop=`expr $loop - 1`
+            iface=$func_arith_result
+            func_arith $loop - 1
+            loop=$func_arith_result
              verstring="$verstring:${iface}.0"
            done
- Line 3395  EOF
+ Line 6337  EOF
            verstring="$verstring:${current}.0"
            ;;
+         qnx)
+           major=".$current"
+           versuffix=".$current"
+           ;;
          sunos)
            major=".$current"
            versuffix=".$current.$revision"
- Line 3403  EOF
+ Line 6350  EOF
          windows)
            # Use '-' rather than '.', since we only want one
            # extension on DOS 8.3 filesystems.
-          major=`expr $current - $age`
+          func_arith $current - $age
+          major=$func_arith_result
            versuffix="-$major"
            ;;
          *)
-          $echo "$modename: unknown library version type \`$version_type'" 1>&2
+          func_fatal_configuration "unknown library version type \`$version_type'"
-          $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-          exit $EXIT_FAILURE
            ;;
          esac
- Line 3444  EOF
+ Line 6390  EOF
          # Check to see if the archive will have undefined symbols.
          if test "$allow_undefined" = yes; then
            if test "$allow_undefined_flag" = unsupported; then
-            $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+            func_warning "undefined symbols not allowed in $host shared libraries"
              build_libtool_libs=no
              build_old_libs=yes
            fi
- Line 3452  EOF
+ Line 6398  EOF
            # Don't allow undefined symbols.
            allow_undefined_flag="$no_undefined_flag"
          fi
        fi
+       func_generate_dlsyms "$libname" "$libname" "yes"
+       libobjs="$libobjs $symfileobj"
+       test "X$libobjs" = "X " && libobjs=
        if test "$mode" != relink; then
          # Remove our outputs, but don't remove object files since they
          # may have been created when compiling PIC objects.
          removelist=
-        tempremovelist=`$echo "$output_objdir/*"`
+        tempremovelist=`$ECHO "$output_objdir/*"`
          for p in $tempremovelist; do
            case $p in
-            *.$objext)
+            *.$objext | *.gcno)
                 ;;
              $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
                 if test "X$precious_files_regex" != "X"; then
-                 if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
                  then
                     continue
                   fi
                 fi
- Line 3475  EOF
+ Line 6426  EOF
              *) ;;
            esac
          done
-        if test -n "$removelist"; then
+        test -n "$removelist" && \
-          $show "${rm}r $removelist"
+          func_show_eval "${RM}r \$removelist"
-          $run ${rm}r $removelist
-        fi
        fi
        # Now set the variables for building old libraries.
- Line 3486  EOF
+ Line 6435  EOF
          oldlibs="$oldlibs $output_objdir/$libname.$libext"
          # Transform .lo files to .o files.
-        oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
        fi
        # Eliminate all temporary directories.
        #for path in $notinst_path; do
-      # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+      # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-      # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+      # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-      # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
        #done
        if test -n "$xrpath"; then
- Line 3534  EOF
+ Line 6483  EOF
        if test "$build_libtool_libs" = yes; then
          if test -n "$rpath"; then
            case $host in
-          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
              # these systems don't actually have a c library (as such)!
              ;;
            *-*-rhapsody* | *-*-darwin1.[012])
              # Rhapsody C library is in the System framework
-            deplibs="$deplibs -framework System"
+            deplibs="$deplibs System.ltframework"
              ;;
            *-*-netbsd*)
              # Don't link with libc until the a.out ld.so is fixed.
- Line 3553  EOF
+ Line 6502  EOF
            *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
              # Compiler inserts libc in the correct place for threads to work
              ;;
           *)
              # Add libc to deplibs on all other systems if necessary.
              if test "$build_libtool_need_lc" = "yes"; then
                deplibs="$deplibs -lc"
- Line 3590  EOF
+ Line 6539  EOF
            # limits. Maybe even breaks it.  We compile a program, linking it
            # against the deplibs as a proxy for the library.  Then we can check
            # whether they linked in statically or dynamically with ldd.
-          $rm conftest.c
+          $opt_dry_run || $RM conftest.c
            cat > conftest.c <<EOF
            int main() { return 0; }
  EOF
-          $rm conftest
+          $opt_dry_run || $RM conftest
            if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
              ldd_output=`ldd conftest`
              for i in $deplibs; do
-              name=`expr $i : '-l\(.*\)'`
+              case $i in
-              # If $name is empty we are operating on a -L argument.
+              -l*)
-              if test "$name" != "" && test "$name" != "0"; then
+                func_stripname -l '' "$i"
+                name=$func_stripname_result
                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                    case " $predeps $postdeps " in
                    *" $i "*)
- Line 3608  EOF
+ Line 6558  EOF
                      i=""
                      ;;
                    esac
                 fi
                  if test -n "$i" ; then
-                  libname=`eval \\$echo \"$libname_spec\"`
+                  libname=`eval "\\$ECHO \"$libname_spec\""`
-                  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                   set dummy $deplib_matches; shift
-                  deplib_match=$2
+                  deplib_match=$1
                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                      newdeplibs="$newdeplibs $i"
                    else
                      droppeddeps=yes
-                    $echo
+                    $ECHO
-                    $echo "*** Warning: dynamic linker does not accept needed library $i."
+                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-                    $echo "*** I have the capability to make that library automatically link in when"
+                    $ECHO "*** I have the capability to make that library automatically link in when"
-                    $echo "*** you link to this library.  But I can only do this if you have a"
+                    $ECHO "*** you link to this library.  But I can only do this if you have a"
-                    $echo "*** shared version of the library, which I believe you do not have"
+                    $ECHO "*** shared version of the library, which I believe you do not have"
-                    $echo "*** because a test_compile did reveal that the linker did not use it for"
+                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-                    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
                    fi
                  fi
-              else
+                ;;
+              *)
                  newdeplibs="$newdeplibs $i"
-              fi
+                ;;
+              esac
              done
            else
              # Error occurred in the first compile.  Let's try to salvage
              # the situation: Compile a separate program for each library.
              for i in $deplibs; do
-              name=`expr $i : '-l\(.*\)'`
+              case $i in
-              # If $name is empty we are operating on a -L argument.
+              -l*)
-              if test "$name" != "" && test "$name" != "0"; then
+                func_stripname -l '' "$i"
-                $rm conftest
+                name=$func_stripname_result
+                $opt_dry_run || $RM conftest
                  if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
                    ldd_output=`ldd conftest`
                    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- Line 3650  EOF
+ Line 6603  EOF
                      esac
                    fi
                    if test -n "$i" ; then
-                    libname=`eval \\$echo \"$libname_spec\"`
+                    libname=`eval "\\$ECHO \"$libname_spec\""`
-                    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                     set dummy $deplib_matches; shift
-                    deplib_match=$2
+                    deplib_match=$1
                      if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                        newdeplibs="$newdeplibs $i"
                      else
                        droppeddeps=yes
-                      $echo
+                      $ECHO
-                      $echo "*** Warning: dynamic linker does not accept needed library $i."
+                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-                      $echo "*** I have the capability to make that library automatically link in when"
+                      $ECHO "*** I have the capability to make that library automatically link in when"
-                      $echo "*** you link to this library.  But I can only do this if you have a"
+                      $ECHO "*** you link to this library.  But I can only do this if you have a"
-                      $echo "*** shared version of the library, which you do not appear to have"
+                      $ECHO "*** shared version of the library, which you do not appear to have"
-                      $echo "*** because a test_compile did reveal that the linker did not use this one"
+                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-                      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
                      fi
                    fi
                  else
                    droppeddeps=yes
-                  $echo
+                  $ECHO
-                  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-                  $echo "*** make it link in!  You will probably need to install it or some"
+                  $ECHO "*** make it link in!  You will probably need to install it or some"
-                  $echo "*** library that it depends on before this library will be fully"
+                  $ECHO "*** library that it depends on before this library will be fully"
-                  $echo "*** functional.  Installing it before continuing would be even better."
+                  $ECHO "*** functional.  Installing it before continuing would be even better."
                  fi
-              else
+                ;;
+              *)
                  newdeplibs="$newdeplibs $i"
-              fi
+                ;;
+              esac
              done
            fi
            ;;
          file_magic*)
-          set dummy $deplibs_check_method
+          set dummy $deplibs_check_method; shift
-          file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
            for a_deplib in $deplibs; do
-            name=`expr $a_deplib : '-l\(.*\)'`
+            case $a_deplib in
-            # If $name is empty we are operating on a -L argument.
+            -l*)
-            if test "$name" != "" && test  "$name" != "0"; then
+              func_stripname -l '' "$a_deplib"
+              name=$func_stripname_result
                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                  case " $predeps $postdeps " in
                  *" $a_deplib "*)
- Line 3697  EOF
+ Line 6653  EOF
                  esac
                fi
                if test -n "$a_deplib" ; then
-                libname=`eval \\$echo \"$libname_spec\"`
+                libname=`eval "\\$ECHO \"$libname_spec\""`
                  for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                    for potent_lib in $potential_libs; do
                        # Follow soft links.
-                      if ls -lLd "$potent_lib" 2>/dev/null \
+                      if ls -lLd "$potent_lib" 2>/dev/null |
-                         | grep " -> " >/dev/null; then
+                         $GREP " -> " >/dev/null; then
                          continue
                        fi
                        # The statement above tries to avoid entering an
- Line 3716  EOF
+ Line 6672  EOF
                          potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
                          case $potliblink in
                          [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-                        *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
                          esac
                        done
-                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-                         | ${SED} 10q \
+                         $SED -e 10q |
-                         | $EGREP "$file_magic_regex" > /dev/null; then
+                         $EGREP "$file_magic_regex" > /dev/null; then
                          newdeplibs="$newdeplibs $a_deplib"
                          a_deplib=""
                          break 2
- Line 3731  EOF
+ Line 6687  EOF
                fi
                if test -n "$a_deplib" ; then
                  droppeddeps=yes
-                $echo
+                $ECHO
-                $echo "*** Warning: linker path does not have real file for library $a_deplib."
+                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-                $echo "*** I have the capability to make that library automatically link in when"
+                $ECHO "*** I have the capability to make that library automatically link in when"
-                $echo "*** you link to this library.  But I can only do this if you have a"
+                $ECHO "*** you link to this library.  But I can only do this if you have a"
-                $echo "*** shared version of the library, which you do not appear to have"
+                $ECHO "*** shared version of the library, which you do not appear to have"
-                $echo "*** because I did check the linker path looking for a file starting"
+                $ECHO "*** because I did check the linker path looking for a file starting"
                  if test -z "$potlib" ; then
-                  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
                  else
-                  $echo "*** with $libname and none of the candidates passed a file format test"
+                  $ECHO "*** with $libname and none of the candidates passed a file format test"
-                  $echo "*** using a file magic. Last file checked: $potlib"
+                  $ECHO "*** using a file magic. Last file checked: $potlib"
                  fi
                fi
-            else
+              ;;
+            *)
                # Add a -L argument.
                newdeplibs="$newdeplibs $a_deplib"
-            fi
+              ;;
+            esac
            done # Gone through all deplibs.
            ;;
          match_pattern*)
-          set dummy $deplibs_check_method
+          set dummy $deplibs_check_method; shift
-          match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
            for a_deplib in $deplibs; do
-            name=`expr $a_deplib : '-l\(.*\)'`
+            case $a_deplib in
-            # If $name is empty we are operating on a -L argument.
+            -l*)
-            if test -n "$name" && test "$name" != "0"; then
+              func_stripname -l '' "$a_deplib"
+              name=$func_stripname_result
                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                  case " $predeps $postdeps " in
                  *" $a_deplib "*)
- Line 3766  EOF
+ Line 6725  EOF
                  esac
                fi
                if test -n "$a_deplib" ; then
-                libname=`eval \\$echo \"$libname_spec\"`
+                libname=`eval "\\$ECHO \"$libname_spec\""`
                  for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                    for potent_lib in $potential_libs; do
                      potlib="$potent_lib" # see symlink-check above in file_magic test
-                    if eval $echo \"$potent_lib\" 2>/dev/null \
+                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
-                        | ${SED} 10q \
+                       $EGREP "$match_pattern_regex" > /dev/null; then
-                        | $EGREP "$match_pattern_regex" > /dev/null; then
                        newdeplibs="$newdeplibs $a_deplib"
                        a_deplib=""
                        break 2
- Line 3783  EOF
+ Line 6741  EOF
                fi
                if test -n "$a_deplib" ; then
                  droppeddeps=yes
-                $echo
+                $ECHO
-                $echo "*** Warning: linker path does not have real file for library $a_deplib."
+                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-                $echo "*** I have the capability to make that library automatically link in when"
+                $ECHO "*** I have the capability to make that library automatically link in when"
-                $echo "*** you link to this library.  But I can only do this if you have a"
+                $ECHO "*** you link to this library.  But I can only do this if you have a"
-                $echo "*** shared version of the library, which you do not appear to have"
+                $ECHO "*** shared version of the library, which you do not appear to have"
-                $echo "*** because I did check the linker path looking for a file starting"
+                $ECHO "*** because I did check the linker path looking for a file starting"
                  if test -z "$potlib" ; then
-                  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
                  else
-                  $echo "*** with $libname and none of the candidates passed a file format test"
+                  $ECHO "*** with $libname and none of the candidates passed a file format test"
-                  $echo "*** using a regex pattern. Last file checked: $potlib"
+                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
                  fi
                fi
-            else
+              ;;
+            *)
                # Add a -L argument.
                newdeplibs="$newdeplibs $a_deplib"
-            fi
+              ;;
+            esac
            done # Gone through all deplibs.
            ;;
          none | unknown | *)
            newdeplibs=""
-          tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-            -e 's/ -[LR][^ ]*//g'`
+              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
              for i in $predeps $postdeps ; do
                # can't use Xsed below, because $i might contain '/'
-              tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
              done
            fi
-          if $echo "X $tmp_deplibs" | $Xsed -e 's/[       ]//g' \
+          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[        ]//g' |
-            | grep . >/dev/null; then
+             $GREP . >/dev/null; then
-            $echo
+            $ECHO
              if test "X$deplibs_check_method" = "Xnone"; then
-              $echo "*** Warning: inter-library dependencies are not supported in this platform."
+              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
              else
-              $echo "*** Warning: inter-library dependencies are not known to be supported."
+              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
              fi
-            $echo "*** All declared inter-library dependencies are being dropped."
+            $ECHO "*** All declared inter-library dependencies are being dropped."
              droppeddeps=yes
            fi
            ;;
- Line 3833  EOF
+ Line 6793  EOF
          case $host in
          *-*-rhapsody* | *-*-darwin1.[012])
-          # On Rhapsody replace the C library is the System framework
+          # On Rhapsody replace the C library with the System framework
-          newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
            ;;
          esac
          if test "$droppeddeps" = yes; then
            if test "$module" = yes; then
-            $echo
+            $ECHO
-            $echo "*** Warning: libtool could not satisfy all declared inter-library"
+            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
-            $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-            $echo "*** a static module, that should work as long as the dlopening"
+            $ECHO "*** a static module, that should work as long as the dlopening"
-            $echo "*** application is linked with the -dlopen flag."
+            $ECHO "*** application is linked with the -dlopen flag."
              if test -z "$global_symbol_pipe"; then
-              $echo
+              $ECHO
-              $echo "*** However, this would only work if libtool was able to extract symbol"
+              $ECHO "*** However, this would only work if libtool was able to extract symbol"
-              $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-              $echo "*** not find such a program.  So, this module is probably useless."
+              $ECHO "*** not find such a program.  So, this module is probably useless."
-              $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
              fi
              if test "$build_old_libs" = no; then
                oldlibs="$output_objdir/$libname.$libext"
- Line 3860  EOF
+ Line 6820  EOF
                build_libtool_libs=no
              fi
            else
-            $echo "*** The inter-library dependencies that have been dropped here will be"
+            $ECHO "*** The inter-library dependencies that have been dropped here will be"
-            $echo "*** automatically added whenever a program is linked with this library"
+            $ECHO "*** automatically added whenever a program is linked with this library"
-            $echo "*** or is declared to -dlopen it."
+            $ECHO "*** or is declared to -dlopen it."
              if test "$allow_undefined" = no; then
-              $echo
+              $ECHO
-              $echo "*** Since this library must not contain undefined symbols,"
+              $ECHO "*** Since this library must not contain undefined symbols,"
-              $echo "*** because either the platform does not support them or"
+              $ECHO "*** because either the platform does not support them or"
-              $echo "*** it was explicitly requested with -no-undefined,"
+              $ECHO "*** it was explicitly requested with -no-undefined,"
-              $echo "*** libtool will only create a static version of it."
+              $ECHO "*** libtool will only create a static version of it."
                if test "$build_old_libs" = no; then
                  oldlibs="$output_objdir/$libname.$libext"
                  build_libtool_libs=module
- Line 3883  EOF
+ Line 6843  EOF
          # Done checking deplibs!
          deplibs=$newdeplibs
        fi
+       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+       case $host in
+         *-*-darwin*)
+           newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+           new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+           deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+           ;;
+       esac
        # move library search paths that coincide with paths to not yet
        # installed libraries to the beginning of the library search list
        new_libs=
- Line 3912  EOF
+ Line 6879  EOF
        done
        deplibs="$new_libs"
        # All the library-specific variables (install_libdir is set above).
        library_names=
        old_library=
- Line 3957  EOF
+ Line 6923  EOF
               test -n "$hardcode_libdirs"; then
              libdir="$hardcode_libdirs"
              if test -n "$hardcode_libdir_flag_spec_ld"; then
-              case $archive_cmds in
+              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-              *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
-              *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
-              esac
              else
                eval dep_rpath=\"$hardcode_libdir_flag_spec\"
              fi
- Line 3986  EOF
+ Line 6949  EOF
          eval shared_ext=\"$shrext_cmds\"
          eval library_names=\"$library_names_spec\"
          set dummy $library_names
-        realname="$2"
+        shift
-        shift; shift
+        realname="$1"
+        shift
          if test -n "$soname_spec"; then
            eval soname=\"$soname_spec\"
- Line 4006  EOF
+ Line 6970  EOF
          done
          # Use standard objects if they are pic
-        test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+        test "X$libobjs" = "X " && libobjs=
+         delfiles=
+         if test -n "$export_symbols" && test -n "$include_expsyms"; then
+           $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+           export_symbols="$output_objdir/$libname.uexp"
+           delfiles="$delfiles $export_symbols"
+         fi
+         orig_export_symbols=
+         case $host_os in
+         cygwin* | mingw* | cegcc*)
+           if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+             # exporting using user supplied symfile
+             if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+               # and it's NOT already a .def file. Must figure out
+               # which of the given symbols are data symbols and tag
+               # them as such. So, trigger use of export_symbols_cmds.
+               # export_symbols gets reassigned inside the "prepare
+               # the list of exported symbols" if statement, so the
+               # include_expsyms logic still works.
+               orig_export_symbols="$export_symbols"
+               export_symbols=
+               always_export_symbols=yes
+             fi
+           fi
+           ;;
+         esac
          # Prepare the list of exported symbols
          if test -z "$export_symbols"; then
            if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-            $show "generating symbol list for \`$libname.la'"
+            func_verbose "generating symbol list for \`$libname.la'"
              export_symbols="$output_objdir/$libname.exp"
-            $run $rm $export_symbols
+            $opt_dry_run || $RM $export_symbols
              cmds=$export_symbols_cmds
              save_ifs="$IFS"; IFS='~'
              for cmd in $cmds; do
                IFS="$save_ifs"
                eval cmd=\"$cmd\"
-              if len=`expr "X$cmd" : ".*"` &&
+              func_len " $cmd"
-               test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+              len=$func_len_result
-                $show "$cmd"
+              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-                $run eval "$cmd" || exit $?
+                func_show_eval "$cmd" 'exit $?'
-                skipped_export=false
+                skipped_export=false
                else
                 # The command line is too long to execute in one step.
-                $show "using reloadable object file for export list..."
+                func_verbose "using reloadable object file for export list..."
                 skipped_export=:
                  # Break out early, otherwise skipped_export may be
                  # set to false by a later but shorter cmd.
                  break
                fi
              done
              IFS="$save_ifs"
-            if test -n "$export_symbols_regex"; then
+            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-              $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-              $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-              $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-              $run eval '$mv "${export_symbols}T" "$export_symbols"'
              fi
            fi
          fi
          if test -n "$export_symbols" && test -n "$include_expsyms"; then
-          $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+          tmp_export_symbols="$export_symbols"
+          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
          fi
+         if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+           # The given exports_symbols file has to be filtered, so filter it.
+           func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+           # FIXME: $output_objdir/$libname.filter potentially contains lots of
+           # 's' commands which not all seds can handle. GNU sed should be fine
+           # though. Also, the filter scales superlinearly with the number of
+           # global variables. join(1) would be nice here, but unfortunately
+           # isn't a blessed tool.
+           $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+           delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+           export_symbols=$output_objdir/$libname.def
+           $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+         fi
          tmp_deplibs=
          for test_deplib in $deplibs; do
-                case " $convenience " in
+          case " $convenience " in
           *" $test_deplib "*) ;;
           *)
             tmp_deplibs="$tmp_deplibs $test_deplib"
             ;;
-                esac
+          esac
          done
          deplibs="$tmp_deplibs"
          if test -n "$convenience"; then
+           if test -n "$whole_archive_flag_spec" &&
+             test "$compiler_needs_object" = yes &&
+             test -z "$libobjs"; then
+             # extract the archives, so we have objects to list.
+             # TODO: could optimize this to just extract one archive.
+             whole_archive_flag_spec=
+           fi
            if test -n "$whole_archive_flag_spec"; then
              save_libobjs=$libobjs
              eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+             test "X$libobjs" = "X " && libobjs=
            else
              gentop="$output_objdir/${outputname}x"
              generated="$generated $gentop"
              func_extract_archives $gentop $convenience
              libobjs="$libobjs $func_extract_archives_result"
+             test "X$libobjs" = "X " && libobjs=
            fi
          fi
          if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
            eval flag=\"$thread_safe_flag_spec\"
            linker_flags="$linker_flags $flag"
- Line 4078  EOF
+ Line 7093  EOF
          # Make a backup of the uninstalled library when relinking
          if test "$mode" = relink; then
-          $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
          fi
          # Do each of the archive commands.
- Line 4091  EOF
+ Line 7106  EOF
              cmds=$module_cmds
            fi
          else
-        if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
             eval test_cmds=\"$archive_expsym_cmds\"
             cmds=$archive_expsym_cmds
           else
             eval test_cmds=\"$archive_cmds\"
-          cmds=$archive_cmds
+            cmds=$archive_cmds
            fi
          fi
          if test "X$skipped_export" != "X:" &&
-           len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+           func_len " $test_cmds" &&
-           test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+           len=$func_len_result &&
+           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
            :
          else
-          # The command line is too long to link in one step, link piecewise.
+          # The command line is too long to link in one step, link piecewise
-          $echo "creating reloadable object files..."
+          # or, if using GNU ld and skipped_export is not :, use a linker
+          # script.
            # Save the value of $output and $libobjs because we want to
            # use them later.  If we have whole_archive_flag_spec, we
- Line 4120  EOF
+ Line 7137  EOF
              save_libobjs=$libobjs
            fi
            save_output=$output
-          output_la=`$echo "X$output" | $Xsed -e "$basename"`
+          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
            # Clear the reloadable object creation command queue and
            # initialize k to one.
            test_cmds=
            concat_cmds=
            objlist=
-           delfiles=
            last_robj=
            k=1
-          output=$output_objdir/$output_la-${k}.$objext
-          # Loop over the list of objects to be linked.
+          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
             output=${output_objdir}/${output_la}.lnkscript
             func_verbose "creating GNU ld script: $output"
-            eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+            $ECHO 'INPUT (' > $output
-            if test "X$objlist" = X ||
+            for obj in $save_libobjs
-               { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+            do
-                 test "$len" -le "$max_cmd_len"; }; then
+              $ECHO "$obj" >> $output
-              objlist="$objlist $obj"
+            done
+            $ECHO ')' >> $output
+            delfiles="$delfiles $output"
+          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+            output=${output_objdir}/${output_la}.lnk
+            func_verbose "creating linker input file list: $output"
+            : > $output
+            set x $save_libobjs
+            shift
+            firstobj=
+            if test "$compiler_needs_object" = yes; then
+              firstobj="$1 "
+              shift
+            fi
+            for obj
+            do
+              $ECHO "$obj" >> $output
+            done
+            delfiles="$delfiles $output"
+            output=$firstobj\"$file_list_spec$output\"
+          else
+            if test -n "$save_libobjs"; then
+              func_verbose "creating reloadable object files..."
+              output=$output_objdir/$output_la-${k}.$objext
+              eval test_cmds=\"$reload_cmds\"
+              func_len " $test_cmds"
+              len0=$func_len_result
+              len=$len0
+              # Loop over the list of objects to be linked.
+              for obj in $save_libobjs
+              do
+                func_len " $obj"
+                func_arith $len + $func_len_result
+                len=$func_arith_result
+                if test "X$objlist" = X ||
+                   test "$len" -lt "$max_cmd_len"; then
+                  func_append objlist " $obj"
+                else
+                  # The command $test_cmds is almost too long, add a
+                  # command to the queue.
+                  if test "$k" -eq 1 ; then
+                    # The first file doesn't have a previous command to add.
+                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+                  else
+                    # All subsequent reloadable object files will link in
+                    # the last one created.
+                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+                  fi
+                  last_robj=$output_objdir/$output_la-${k}.$objext
+                  func_arith $k + 1
+                  k=$func_arith_result
+                  output=$output_objdir/$output_la-${k}.$objext
+                  objlist=$obj
+                  func_len " $last_robj"
+                  func_arith $len0 + $func_len_result
+                  len=$func_arith_result
+                fi
+              done
+              # Handle the remaining objects by creating one last
+              # reloadable object file.  All subsequent reloadable object
+              # files will link in the last one created.
+              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+              if test -n "$last_robj"; then
+                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+              fi
+              delfiles="$delfiles $output"
              else
-              # The command $test_cmds is almost too long, add a
+              output=
-              # command to the queue.
+            fi
-              if test "$k" -eq 1 ; then
-                # The first file doesn't have a previous command to add.
+            if ${skipped_export-false}; then
-                eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+              func_verbose "generating symbol list for \`$libname.la'"
-              else
+              export_symbols="$output_objdir/$libname.exp"
-                # All subsequent reloadable object files will link in
+              $opt_dry_run || $RM $export_symbols
-                # the last one created.
+              libobjs=$output
-                eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+              # Append the command to create the export file.
+              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+              if test -n "$last_robj"; then
+                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
                fi
-               last_robj=$output_objdir/$output_la-${k}.$objext
-               k=`expr $k + 1`
-               output=$output_objdir/$output_la-${k}.$objext
-               objlist=$obj
-               len=1
              fi
-           done
-           # Handle the remaining objects by creating one last
-           # reloadable object file.  All subsequent reloadable object
-           # files will link in the last one created.
-           test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-           eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-          if ${skipped_export-false}; then
+            test -n "$save_libobjs" &&
-            $show "generating symbol list for \`$libname.la'"
+              func_verbose "creating a temporary reloadable object file: $output"
-            export_symbols="$output_objdir/$libname.exp"
-            $run $rm $export_symbols
-            libobjs=$output
-            # Append the command to create the export file.
-            eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-          # Set up a command to remove the reloadable object files
+            # Loop through the commands generated above and execute them.
-          # after they are used.
+            save_ifs="$IFS"; IFS='~'
-          i=0
+            for cmd in $concat_cmds; do
-          while test "$i" -lt "$k"
+              IFS="$save_ifs"
-          do
+              $opt_silent || {
-            i=`expr $i + 1`
+                  func_quote_for_expand "$cmd"
-            delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+                  eval "func_echo $func_quote_for_expand_result"
-          done
+              }
+              $opt_dry_run || eval "$cmd" || {
+                lt_exit=$?
-          $echo "creating a temporary reloadable object file: $output"
+                # Restore the uninstalled library and exit
+                if test "$mode" = relink; then
+                  ( cd "$output_objdir" && \
+                    $RM "${realname}T" && \
+                    $MV "${realname}U" "$realname" )
+                fi
-          # Loop through the commands generated above and execute them.
+                exit $lt_exit
-          save_ifs="$IFS"; IFS='~'
+              }
-          for cmd in $concat_cmds; do
+            done
              IFS="$save_ifs"
-             $show "$cmd"
-             $run eval "$cmd" || exit $?
-           done
-           IFS="$save_ifs"
+             if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+               func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+               func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+             fi
+           fi
+           if ${skipped_export-false}; then
+             if test -n "$export_symbols" && test -n "$include_expsyms"; then
+               tmp_export_symbols="$export_symbols"
+               test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+               $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+             fi
+             if test -n "$orig_export_symbols"; then
+               # The given exports_symbols file has to be filtered, so filter it.
+               func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+               # FIXME: $output_objdir/$libname.filter potentially contains lots of
+               # 's' commands which not all seds can handle. GNU sed should be fine
+               # though. Also, the filter scales superlinearly with the number of
+               # global variables. join(1) would be nice here, but unfortunately
+               # isn't a blessed tool.
+               $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+               delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+               export_symbols=$output_objdir/$libname.def
+               $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+             fi
+           fi
            libobjs=$output
            # Restore the value of output.
            output=$save_output
            if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
              eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+             test "X$libobjs" = "X " && libobjs=
            fi
            # Expand the library linking commands again to reset the
            # value of $libobjs for piecewise linking.
- Line 4210  EOF
+ Line 7313  EOF
                cmds=$module_cmds
              fi
            else
-          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
               cmds=$archive_expsym_cmds
             else
-            cmds=$archive_cmds
+              cmds=$archive_cmds
              fi
            fi
+         fi
-          # Append the command to remove the reloadable object files
+        if test -n "$delfiles"; then
-          # to the just-reset $cmds.
+          # Append the command to remove temporary files to $cmds.
-          eval cmds=\"\$cmds~\$rm $delfiles\"
+          eval cmds=\"\$cmds~\$RM $delfiles\"
          fi
+         # Add any objects from preloaded convenience libraries
+         if test -n "$dlprefiles"; then
+           gentop="$output_objdir/${outputname}x"
+           generated="$generated $gentop"
+           func_extract_archives $gentop $dlprefiles
+           libobjs="$libobjs $func_extract_archives_result"
+           test "X$libobjs" = "X " && libobjs=
+         fi
          save_ifs="$IFS"; IFS='~'
          for cmd in $cmds; do
            IFS="$save_ifs"
            eval cmd=\"$cmd\"
-          $show "$cmd"
+          $opt_silent || {
-          $run eval "$cmd" || {
+            func_quote_for_expand "$cmd"
+            eval "func_echo $func_quote_for_expand_result"
+          }
+          $opt_dry_run || eval "$cmd" || {
              lt_exit=$?
              # Restore the uninstalled library and exit
              if test "$mode" = relink; then
-              $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+              ( cd "$output_objdir" && \
+                $RM "${realname}T" && \
+                $MV "${realname}U" "$realname" )
              fi
              exit $lt_exit
- Line 4241  EOF
+ Line 7361  EOF
          # Restore the uninstalled library and exit
          if test "$mode" = relink; then
-          $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
            if test -n "$convenience"; then
              if test -z "$whole_archive_flag_spec"; then
-              $show "${rm}r $gentop"
+              func_show_eval '${RM}r "$gentop"'
-              $run ${rm}r "$gentop"
              fi
            fi
- Line 4256  EOF
+ Line 7375  EOF
          # Create links to the real library.
          for linkname in $linknames; do
            if test "$realname" != "$linkname"; then
-            $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-            $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
            fi
          done
- Line 4270  EOF
+ Line 7388  EOF
        ;;
      obj)
+       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+         func_warning "\`-dlopen' is ignored for objects"
+       fi
        case " $deplibs" in
        *\ -l* | *\ -L*)
-        $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+        func_warning "\`-l' and \`-L' are ignored for objects" ;;
        esac
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      test -n "$rpath" && \
-        $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+        func_warning "\`-rpath' is ignored for objects"
-      fi
-      if test -n "$rpath"; then
+      test -n "$xrpath" && \
-        $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+        func_warning "\`-R' is ignored for objects"
-      fi
-      if test -n "$xrpath"; then
+      test -n "$vinfo" && \
-        $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+        func_warning "\`-version-info' is ignored for objects"
-      fi
-      if test -n "$vinfo"; then
+      test -n "$release" && \
-        $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+        func_warning "\`-release' is ignored for objects"
-      fi
-       if test -n "$release"; then
-         $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-       fi
        case $output in
        *.lo)
-        if test -n "$objs$old_deplibs"; then
+        test -n "$objs$old_deplibs" && \
-          $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-          exit $EXIT_FAILURE
-        fi
+        libobj=$output
-        libobj="$output"
+        func_lo2o "$libobj"
-        obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+        obj=$func_lo2o_result
          ;;
        *)
          libobj=
- Line 4311  EOF
+ Line 7425  EOF
        esac
        # Delete the old objects.
-      $run $rm $obj $libobj
+      $opt_dry_run || $RM $obj $libobj
        # Objects from convenience libraries.  This assumes
        # single-version convenience libraries.  Whenever we create
- Line 4327  EOF
+ Line 7441  EOF
        if test -n "$convenience"; then
          if test -n "$whole_archive_flag_spec"; then
            eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-          reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
          else
            gentop="$output_objdir/${obj}x"
            generated="$generated $gentop"
- Line 4338  EOF
+ Line 7452  EOF
        fi
        # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
        output="$obj"
-      cmds=$reload_cmds
+      func_execute_cmds "$reload_cmds" 'exit $?'
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        IFS="$save_ifs"
-        eval cmd=\"$cmd\"
-        $show "$cmd"
-        $run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
        # Exit if we aren't doing a library object file.
        if test -z "$libobj"; then
          if test -n "$gentop"; then
-          $show "${rm}r $gentop"
+          func_show_eval '${RM}r "$gentop"'
-          $run ${rm}r $gentop
          fi
          exit $EXIT_SUCCESS
- Line 4363  EOF
+ Line 7468  EOF
        if test "$build_libtool_libs" != yes; then
          if test -n "$gentop"; then
-          $show "${rm}r $gentop"
+          func_show_eval '${RM}r "$gentop"'
-          $run ${rm}r $gentop
          fi
          # Create an invalid libtool object if no PIC, so that we don't
          # accidentally link it into a program.
          # $show "echo timestamp > $libobj"
-        # $run eval "echo timestamp > $libobj" || exit $?
+        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
          exit $EXIT_SUCCESS
        fi
- Line 4378  EOF
+ Line 7482  EOF
          # Only do commands if we really have different PIC objects.
          reload_objs="$libobjs $reload_conv_objs"
          output="$libobj"
-        cmds=$reload_cmds
+        func_execute_cmds "$reload_cmds" 'exit $?'
-        save_ifs="$IFS"; IFS='~'
-        for cmd in $cmds; do
-          IFS="$save_ifs"
-          eval cmd=\"$cmd\"
-          $show "$cmd"
-          $run eval "$cmd" || exit $?
-        done
-        IFS="$save_ifs"
        fi
        if test -n "$gentop"; then
-        $show "${rm}r $gentop"
+        func_show_eval '${RM}r "$gentop"'
-        $run ${rm}r $gentop
        fi
        exit $EXIT_SUCCESS
- Line 4399  EOF
+ Line 7494  EOF
      prog)
        case $host in
-        *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+        *cygwin*) func_stripname '' '.exe' "$output"
+                  output=$func_stripname_result.exe;;
        esac
-      if test -n "$vinfo"; then
+      test -n "$vinfo" && \
-        $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+        func_warning "\`-version-info' is ignored for programs"
-      fi
-      if test -n "$release"; then
+      test -n "$release" && \
-        $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+        func_warning "\`-release' is ignored for programs"
-      fi
-      if test "$preload" = yes; then
+      test "$preload" = yes \
-        if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+        && test "$dlopen_support" = unknown \
-           test "$dlopen_self_static" = unknown; then
+        && test "$dlopen_self" = unknown \
-          $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+        && test "$dlopen_self_static" = unknown && \
-        fi
+          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-      fi
        case $host in
        *-*-rhapsody* | *-*-darwin1.[012])
          # On Rhapsody replace the C library is the System framework
-        compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-        finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
          ;;
        esac
        case $host in
-      *darwin*)
+      *-*-darwin*)
         # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
+        # But is supposedly fixed on 10.4 or later (yay!).
-        compile_command="$compile_command ${wl}-bind_at_load"
+        if test "$tagname" = CXX ; then
           case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-        fi
+.[0123])
-        ;;
+              compile_command="$compile_command ${wl}-bind_at_load"
+              finalize_command="$finalize_command ${wl}-bind_at_load"
+            ;;
+          esac
+        fi
+        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+        ;;
        esac
- Line 4506  EOF
+ Line 7607  EOF
            esac
          fi
          case $host in
-        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-          testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
            case :$dllsearchpath: in
            *":$libdir:"*) ;;
+           ::) dllsearchpath=$libdir;;
            *) dllsearchpath="$dllsearchpath:$libdir";;
            esac
            case :$dllsearchpath: in
            *":$testbindir:"*) ;;
+           ::) dllsearchpath=$testbindir;;
            *) dllsearchpath="$dllsearchpath:$testbindir";;
            esac
            ;;
- Line 4565  EOF
+ Line 7668  EOF
        if test -n "$libobjs" && test "$build_old_libs" = yes; then
          # Transform all the library objects into standard objects.
-        compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-        finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        fi
-      dlsyms=
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-        if test -n "$NM" && test -n "$global_symbol_pipe"; then
-          dlsyms="${outputname}S.c"
-        else
-          $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-        fi
-      fi
-      if test -n "$dlsyms"; then
+      # template prelinking step
-        case $dlsyms in
+      if test -n "$prelink_cmds"; then
-        "") ;;
+        func_execute_cmds "$prelink_cmds" 'exit $?'
-        *.c)
-          # Discover the nlist of each of the dlfiles.
-          nlist="$output_objdir/${outputname}.nm"
-          $show "$rm $nlist ${nlist}S ${nlist}T"
-          $run $rm "$nlist" "${nlist}S" "${nlist}T"
-          # Parse the name list into a source file.
-          $show "creating $output_objdir/$dlsyms"
-          test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-/* External symbol declarations for the compiler. */\
-"
-          if test "$dlself" = yes; then
-            $show "generating symbol list for \`$output'"
-            test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-            # Add our own program objects to the symbol list.
-            progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-            for arg in $progfiles; do
-              $show "extracting global C symbols from \`$arg'"
-              $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-            done
-            if test -n "$exclude_expsyms"; then
-              $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-              $run eval '$mv "$nlist"T "$nlist"'
-            fi
-            if test -n "$export_symbols_regex"; then
-              $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-              $run eval '$mv "$nlist"T "$nlist"'
-            fi
-            # Prepare the list of exported symbols
-            if test -z "$export_symbols"; then
-              export_symbols="$output_objdir/$outputname.exp"
-              $run $rm $export_symbols
-              $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-                $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-            else
-              $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-              $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-              $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-                $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-            fi
-          fi
-          for arg in $dlprefiles; do
-            $show "extracting global C symbols from \`$arg'"
-            name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-            $run eval '$echo ": $name " >> "$nlist"'
-            $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-          done
-          if test -z "$run"; then
-            # Make sure we have at least an empty file.
-            test -f "$nlist" || : > "$nlist"
-            if test -n "$exclude_expsyms"; then
-              $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-              $mv "$nlist"T "$nlist"
-            fi
-            # Try sorting and uniquifying the output.
-            if grep -v "^: " < "$nlist" |
-                if sort -k 3 </dev/null >/dev/null 2>&1; then
-                  sort -k 3
-                else
-                  sort +2
-                fi |
-                uniq > "$nlist"S; then
-              :
-            else
-              grep -v "^: " < "$nlist" > "$nlist"S
-            fi
-            if test -f "$nlist"S; then
-              eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-            else
-              $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-            fi
-            $echo >> "$output_objdir/$dlsyms" "\
-#undef lt_preloaded_symbols
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-/* The mapping between symbol names and symbols. */
-"
-            case $host in
-            *cygwin* | *mingw* )
-          $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-              ;;
-            * )
-          $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-              ;;
-            esac
-          $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-            $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-#ifdef __cplusplus
-}
-#endif\
-"
-          fi
-          pic_flag_for_symtable=
-          case $host in
-          # compiling the symbol table file with pic_flag works around
-          # a FreeBSD bug that causes programs to crash when -lm is
-          # linked before any other PIC object.  But we must not use
-          # pic_flag when linking with -static.  The problem exists in
-          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-            case "$compile_command " in
-            *" -static "*) ;;
-            *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-            esac;;
-          *-*-hpux*)
-            case "$compile_command " in
-            *" -static "*) ;;
-            *) pic_flag_for_symtable=" $pic_flag";;
-            esac
-          esac
-          # Now compile the dynamic symbol file.
-          $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-          $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-          # Clean up the generated files.
-          $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-          $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-          # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            else
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            ;;
-          esac
-          ;;
-        *)
-          $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-          exit $EXIT_FAILURE
-          ;;
-        esac
-      else
-        # We keep going just in case the user didn't refer to
-        # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-        # really was required.
-        # Nullify the symbol file.
-        compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-        finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
        fi
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+      wrappers_required=yes
+      case $host in
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
          # Replace the output file specification.
-        compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
          link_command="$compile_command$compile_rpath"
          # We have no uninstalled library dependencies, so finalize right now.
-        $show "$link_command"
+        exit_status=0
-        $run eval "$link_command"
+        func_show_eval "$link_command" 'exit_status=$?'
-        exit_status=$?
          # Delete the generated files.
-        if test -n "$dlsyms"; then
+        if test -f "$output_objdir/${outputname}S.${objext}"; then
-          $show "$rm $output_objdir/${outputname}S.${objext}"
+          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-          $run $rm "$output_objdir/${outputname}S.${objext}"
          fi
          exit $exit_status
        fi
-       if test -n "$shlibpath_var"; then
-         # We should set the shlibpath_var
-         rpath=
-         for dir in $temp_rpath; do
-           case $dir in
-           [\\/]* | [A-Za-z]:[\\/]*)
-             # Absolute path.
-             rpath="$rpath$dir:"
-             ;;
-           *)
-             # Relative path: add a thisdir entry.
-             rpath="$rpath\$thisdir/$dir:"
-             ;;
-           esac
-         done
-         temp_rpath="$rpath"
-       fi
        if test -n "$compile_shlibpath$finalize_shlibpath"; then
          compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
        fi
- Line 4872  static const void *lt_preloaded_setup() {
+ Line 7745  static const void *lt_preloaded_setup() {
          # We don't need to create a wrapper script.
          link_command="$compile_var$compile_command$compile_rpath"
          # Replace the output file specification.
-        link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
          # Delete the old output file.
-        $run $rm $output
+        $opt_dry_run || $RM $output
          # Link the executable and exit
-        $show "$link_command"
+        func_show_eval "$link_command" 'exit $?'
-        $run eval "$link_command" || exit $?
          exit $EXIT_SUCCESS
        fi
- Line 4886  static const void *lt_preloaded_setup() {
+ Line 7758  static const void *lt_preloaded_setup() {
          link_command="$compile_var$compile_command$compile_rpath"
          relink_command="$finalize_var$finalize_command$finalize_rpath"
-        $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+        func_warning "this platform does not like uninstalled shared libraries"
-        $echo "$modename: \`$output' will be relinked during installation" 1>&2
+        func_warning "\`$output' will be relinked during installation"
        else
          if test "$fast_install" != no; then
            link_command="$finalize_var$compile_command$finalize_rpath"
            if test "$fast_install" = yes; then
-            relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
            else
              # fast_install is set to needless
              relink_command=
- Line 4904  static const void *lt_preloaded_setup() {
+ Line 7776  static const void *lt_preloaded_setup() {
        fi
        # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
        # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-      $show "$link_command"
+      func_show_eval "$link_command" 'exit $?'
-      $run eval "$link_command" || exit $?
        # Now create the wrapper script.
-      $show "creating $output"
+      func_verbose "creating $output"
        # Quote the relink command for shipping.
        if test -n "$relink_command"; then
          # Preserve any variables that may affect compiler behavior
          for var in $variables_saved_for_relink; do
            if eval test -z \"\${$var+set}\"; then
-            relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
            elif eval var_value=\$$var; test -z "$var_value"; then
              relink_command="$var=; export $var; $relink_command"
            else
-            var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+            func_quote_for_eval "$var_value"
-            relink_command="$var=\"$var_value\"; export $var; $relink_command"
+            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
            fi
          done
          relink_command="(cd `pwd`; $relink_command)"
-        relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
        fi
-      # Quote $echo for shipping.
+      # Quote $ECHO for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
          case $progpath in
          [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
          *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
          esac
-        qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
        else
-        qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
        fi
-      # Only actually do things if our run command is non-null.
+      # Only actually do things if not in dry run mode.
-      if test -z "$run"; then
+      $opt_dry_run || {
          # win32 will think the script is a binary if it has
          # a .exe suffix, so we strip it off here.
          case $output in
-          *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+          *.exe) func_stripname '' '.exe' "$output"
+                 output=$func_stripname_result ;;
          esac
          # test for cygwin because mv fails w/o .exe extensions
          case $host in
            *cygwin*)
              exeext=.exe
-            outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+            func_stripname '' '.exe' "$outputname"
+            outputname=$func_stripname_result ;;
            *) exeext= ;;
          esac
          case $host in
            *cygwin* | *mingw* )
-            output_name=`basename $output`
+            func_dirname_and_basename "$output" "" "."
-            output_path=`dirname $output`
+            output_name=$func_basename_result
             output_path=$func_dirname_result
             cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            $rm $cwrappersource $cwrapper
+            cwrapper="$output_path/$output_name.exe"
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+            $RM $cwrappersource $cwrapper
+            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-            cat > $cwrappersource <<EOF
+            func_emit_cwrapperexe_src > $cwrappersource
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+            # The wrapper executable is built using the $host compiler,
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+            # because it contains $host paths and files. If cross-
+            # compiling, it, like the target executable, must be
+            # executed on the $host or under an emulation environment.
+            $opt_dry_run || {
+              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+              $STRIP $cwrapper
+            }
-   The $output program cannot be directly executed until all the libtool
+            # Now, create the wrapper script for func_source use:
-   libraries that it depends on are installed.
+            func_ltwrapper_scriptname $cwrapper
+            $RM $func_ltwrapper_scriptname_result
-   This wrapper executable should never be moved out of the build directory.
+            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-   If it is, it will not operate correctly.
+            $opt_dry_run || {
+              # note: this script will not be executed, so do not chmod.
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+              if test "x$build" = "x$host" ; then
-   but could eventually absorb all of the scripts functionality and
+                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-   exec $objdir/$outputname directly.
+              else
-*/
+                func_emit_wrapper no > $func_ltwrapper_scriptname_result
-EOF
+              fi
-            cat >> $cwrappersource<<"EOF"
+            }
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-const char *program_name = NULL;
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
-EOF
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-  return p;
-}
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-const char *
-base_name (const char *name)
-{
-  const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-int
-check_executable(const char * path)
-{
-  struct stat st;
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-  assert(str != NULL);
-  assert(pat != NULL);
-  len = strlen(str);
-  patlen = strlen(pat);
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-        $echo > $output "\
-#! $SHELL
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-relink_command=\"$relink_command\"
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-        $echo >> $output "\
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-        if test "$fast_install" = yes; then
-          $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-    file=\"\$\$-\$program\"
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-          $echo >> $output "\
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-        $echo \"\$relink_command_output\" >&2
-        $rm \"\$progdir/\$file\"
-        exit $EXIT_FAILURE
-      fi
-    fi
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-        else
-          $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-        fi
-        $echo >> $output "\
-  if test -f \"\$progdir/\$program\"; then"
-        # Export our shlibpath_var if we have one.
-        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-          $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-    export $shlibpath_var
-"
-        fi
-        # fixup the dll searchpath if we need to.
-        if test -n "$dllsearchpath"; then
-          $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-        fi
-        $echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-        case $host in
-        # Backslashes separate directories on plain windows
-        *-*-mingw | *-*-os2*)
-          $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
            ;;
+           * )
+             $RM $output
+             trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-        *)
+            func_emit_wrapper no > $output
-          $echo >> $output "\
+            chmod +x $output
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
            ;;
          esac
-        $echo >> $output "\
+      }
-      \$echo \"\$0: cannot exec \$program \$*\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-        chmod +x $output
-      fi
        exit $EXIT_SUCCESS
        ;;
      esac
- Line 5514  fi\
+ Line 7881  fi\
      for oldlib in $oldlibs; do
        if test "$build_libtool_libs" = convenience; then
-        oldobjs="$libobjs_save"
+        oldobjs="$libobjs_save $symfileobj"
          addlibs="$convenience"
          build_libtool_libs=no
        else
- Line 5523  fi\
+ Line 7890  fi\
            build_libtool_libs=no
          else
            oldobjs="$old_deplibs $non_pic_objects"
+           if test "$preload" = yes && test -f "$symfileobj"; then
+             oldobjs="$oldobjs $symfileobj"
+           fi
          fi
          addlibs="$old_convenience"
        fi
- Line 5537  fi\
+ Line 7907  fi\
        # Do each command in the archive commands.
        if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
+        cmds=$old_archive_from_new_cmds
        else
+         # Add any objects from preloaded convenience libraries
+         if test -n "$dlprefiles"; then
+           gentop="$output_objdir/${outputname}x"
+           generated="$generated $gentop"
+           func_extract_archives $gentop $dlprefiles
+           oldobjs="$oldobjs $func_extract_archives_result"
+         fi
          # POSIX demands no paths to be encoded in archives.  We have
          # to avoid creating archives with duplicate basenames if we
          # might have to extract them afterwards, e.g., when creating a
- Line 5547  fi\
+ Line 7927  fi\
          # not supported by libtool).
          if (for obj in $oldobjs
              do
-              $echo "X$obj" | $Xsed -e 's%^.*/%%'
+              func_basename "$obj"
+              $ECHO "$func_basename_result"
              done | sort | sort -uc >/dev/null 2>&1); then
            :
          else
-          $echo "copying selected object files to avoid basename conflicts..."
+          $ECHO "copying selected object files to avoid basename conflicts..."
           gentop="$output_objdir/${outputname}x"
-          if test -z "$gentop"; then
+          generated="$generated $gentop"
           func_mkdir_p "$gentop"
             generated="$generated $gentop"
-            $show "${rm}r $gentop"
-            $run ${rm}r "$gentop"
-            $show "$mkdir $gentop"
-            $run $mkdir "$gentop"
-            exit_status=$?
-            if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-              exit $exit_status
-            fi
-          fi
            save_oldobjs=$oldobjs
            oldobjs=
            counter=1
            for obj in $save_oldobjs
            do
-            objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+            func_basename "$obj"
+            objbase="$func_basename_result"
              case " $oldobjs " in
              " ") oldobjs=$obj ;;
              *[\ /]"$objbase "*)
- Line 5580  fi\
+ Line 7950  fi\
                  # Make sure we don't pick an alternate name that also
                  # overlaps.
                  newobj=lt$counter-$objbase
-                counter=`expr $counter + 1`
+                func_arith $counter + 1
+                counter=$func_arith_result
                  case " $oldobjs " in
                  *[\ /]"$newobj "*) ;;
                  *) if test ! -f "$gentop/$newobj"; then break; fi ;;
                  esac
                done
-              $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-              $run ln "$obj" "$gentop/$newobj" ||
-              $run cp "$obj" "$gentop/$newobj"
                oldobjs="$oldobjs $gentop/$newobj"
                ;;
              *) oldobjs="$oldobjs $obj" ;;
              esac
            done
          fi
          eval cmds=\"$old_archive_cmds\"
-        if len=`expr "X$cmds" : ".*"` &&
+        func_len " $cmds"
-             test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+        len=$func_len_result
+        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
            cmds=$old_archive_cmds
          else
            # the command line is too long to link in one step, link in parts
-          $echo "using piecewise archive linking..."
+          func_verbose "using piecewise archive linking..."
            save_RANLIB=$RANLIB
            RANLIB=:
            objlist=
            concat_cmds=
            save_oldobjs=$oldobjs
+          oldobjs=
            # Is there a better way of finding the last object in the list?
            for obj in $save_oldobjs
            do
              last_oldobj=$obj
            done
+           eval test_cmds=\"$old_archive_cmds\"
+           func_len " $test_cmds"
+           len0=$func_len_result
+           len=$len0
            for obj in $save_oldobjs
            do
-            oldobjs="$objlist $obj"
+            func_len " $obj"
-            objlist="$objlist $obj"
+            func_arith $len + $func_len_result
-            eval test_cmds=\"$old_archive_cmds\"
+            len=$func_arith_result
-            if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+            func_append objlist " $obj"
-               test "$len" -le "$max_cmd_len"; then
+            if test "$len" -lt "$max_cmd_len"; then
                :
              else
                # the above command should be used before it gets too long
                oldobjs=$objlist
                if test "$obj" = "$last_oldobj" ; then
                 RANLIB=$save_RANLIB
                fi
                test -z "$concat_cmds" || concat_cmds=$concat_cmds~
                eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
                objlist=
+               len=$len0
              fi
            done
            RANLIB=$save_RANLIB
- Line 5643  fi\
+ Line 8017  fi\
            fi
          fi
        fi
-      save_ifs="$IFS"; IFS='~'
+      func_execute_cmds "$cmds" 'exit $?'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-        IFS="$save_ifs"
-        $show "$cmd"
-        $run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
      done
-    if test -n "$generated"; then
+    test -n "$generated" && \
-      $show "${rm}r$generated"
+      func_show_eval "${RM}r$generated"
-      $run ${rm}r$generated
-    fi
      # Now create the libtool archive.
      case $output in
      *.la)
        old_library=
        test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
+      func_verbose "creating $output"
        # Preserve any variables that may affect compiler behavior
        for var in $variables_saved_for_relink; do
          if eval test -z \"\${$var+set}\"; then
-          relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
          elif eval var_value=\$$var; test -z "$var_value"; then
            relink_command="$var=; export $var; $relink_command"
          else
-          var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+          func_quote_for_eval "$var_value"
-          relink_command="$var=\"$var_value\"; export $var; $relink_command"
+          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
          fi
        done
        # Quote the link command for shipping.
        relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
        if test "$hardcode_automatic" = yes ; then
          relink_command=
        fi
        # Only create the output if not a dry run.
-      if test -z "$run"; then
+      $opt_dry_run || {
          for installed in no yes; do
            if test "$installed" = yes; then
              if test -z "$install_libdir"; then
- Line 5697  fi\
+ Line 8061  fi\
              for deplib in $dependency_libs; do
                case $deplib in
                *.la)
-                name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+                func_basename "$deplib"
+                name="$func_basename_result"
                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-                if test -z "$libdir"; then
+                test -z "$libdir" && \
-                  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+                  func_fatal_error "\`$deplib' is not a valid libtool archive"
-                  exit $EXIT_FAILURE
-                fi
                  newdependency_libs="$newdependency_libs $libdir/$name"
                  ;;
                *) newdependency_libs="$newdependency_libs $deplib" ;;
- Line 5710  fi\
+ Line 8073  fi\
              done
              dependency_libs="$newdependency_libs"
              newdlfiles=
              for lib in $dlfiles; do
-              name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+              case $lib in
               *.la)
-              if test -z "$libdir"; then
+                func_basename "$lib"
-                $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+                name="$func_basename_result"
-                exit $EXIT_FAILURE
+                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-              fi
+                test -z "$libdir" && \
-              newdlfiles="$newdlfiles $libdir/$name"
+                  func_fatal_error "\`$lib' is not a valid libtool archive"
+                newdlfiles="$newdlfiles $libdir/$name"
+                ;;
+              *) newdlfiles="$newdlfiles $lib" ;;
+              esac
              done
              dlfiles="$newdlfiles"
              newdlprefiles=
              for lib in $dlprefiles; do
-              name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+              case $lib in
               *.la)
-              if test -z "$libdir"; then
+                # Only pass preopened files to the pseudo-archive (for
-                $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+                # eventual linking with the app. that links it) if we
-                exit $EXIT_FAILURE
+                # didn't already link the preopened objects directly into
-              fi
+                # the library:
-              newdlprefiles="$newdlprefiles $libdir/$name"
+                func_basename "$lib"
+                name="$func_basename_result"
+                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+                test -z "$libdir" && \
+                  func_fatal_error "\`$lib' is not a valid libtool archive"
+                newdlprefiles="$newdlprefiles $libdir/$name"
+                ;;
+              esac
              done
              dlprefiles="$newdlprefiles"
            else
- Line 5751  fi\
+ Line 8126  fi\
              done
              dlprefiles="$newdlprefiles"
            fi
-          $rm $output
+          $RM $output
            # place dlname in correct position for cygwin
            tdlname=$dlname
            case $host,$output,$installed,$module,$dlname in
-            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
            esac
-          $echo > $output "\
+          $ECHO > $output "\
  # $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
  #
  # Please DO NOT delete this file!
  # It is necessary for linking the library.
- Line 5773  library_names='$library_names'
+ Line 8148  library_names='$library_names'
  # The name of the static archive.
  old_library='$old_library'
+ # Linker flags that can not go in dependency_libs.
+ inherited_linker_flags='$new_inherited_linker_flags'
  # Libraries that this one depends upon.
  dependency_libs='$dependency_libs'
+ # Names of additional weak libraries provided by this library
+ weak_library_names='$weak_libs'
  # Version information for $libname.
  current=$current
  age=$age
- Line 5794  dlpreopen='$dlprefiles'
+ Line 8175  dlpreopen='$dlprefiles'
  # Directory that this library needs to be installed in:
  libdir='$install_libdir'"
            if test "$installed" = no && test "$need_relink" = yes; then
-            $echo >> $output "\
+            $ECHO >> $output "\
  relink_command=\"$relink_command\""
            fi
          done
-      fi
+      }
        # Do a symbolic link so that the libtool archive can be found in
        # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
        ;;
      esac
      exit $EXIT_SUCCESS
-    ;;
+}
-  # libtool install mode
+{ test "$mode" = link || test "$mode" = relink; } &&
-  install)
+    func_mode_link ${1+"$@"}
-    modename="$modename: install"
-     # There may be an optional sh(1) argument at the beginning of
-     # install_prog (especially on Windows NT).
-     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-        # Allow the use of GNU shtool's install command.
-        $echo "X$nonopt" | grep shtool > /dev/null; then
-       # Aesthetically quote it.
-       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-       case $arg in
-       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-         arg="\"$arg\""
-         ;;
-       esac
-       install_prog="$arg "
-       arg="$1"
-       shift
-     else
-       install_prog=
-       arg=$nonopt
-     fi
-    # The real first argument should be the name of the installation program.
+# func_mode_uninstall arg...
-    # Aesthetically quote it.
+func_mode_uninstall ()
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+{
-    case $arg in
+    $opt_debug
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+    RM="$nonopt"
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-    # We need to accept at least all the BSD install flags.
-    dest=
      files=
-     opts=
-     prev=
-     install_type=
-     isdir=no
-     stripme=
-     for arg
-     do
-       if test -n "$dest"; then
-         files="$files $dest"
-         dest=$arg
-         continue
-       fi
-       case $arg in
-       -d) isdir=yes ;;
-       -f)
-         case " $install_prog " in
-         *[\\\ /]cp\ *) ;;
-         *) prev=$arg ;;
-         esac
-         ;;
-       -g | -m | -o) prev=$arg ;;
-       -s)
-         stripme=" -s"
-         continue
-         ;;
-       -*)
-         ;;
-       *)
-         # If the previous option needed an argument, then skip it.
-         if test -n "$prev"; then
-           prev=
-         else
-           dest=$arg
-           continue
-         fi
-         ;;
-       esac
-       # Aesthetically quote the argument.
-       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-       case $arg in
-       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
-         arg="\"$arg\""
-         ;;
-       esac
-       install_prog="$install_prog $arg"
-     done
-     if test -z "$install_prog"; then
-       $echo "$modename: you must specify an install program" 1>&2
-       $echo "$help" 1>&2
-       exit $EXIT_FAILURE
-     fi
-     if test -n "$prev"; then
-       $echo "$modename: the \`$prev' option requires an argument" 1>&2
-       $echo "$help" 1>&2
-       exit $EXIT_FAILURE
-     fi
-     if test -z "$files"; then
-       if test -z "$dest"; then
-         $echo "$modename: no file or destination specified" 1>&2
-       else
-         $echo "$modename: you must specify a destination" 1>&2
-       fi
-       $echo "$help" 1>&2
-       exit $EXIT_FAILURE
-     fi
-     # Strip any trailing slash from the destination.
-     dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-     # Check to see that the destination is a directory.
-     test -d "$dest" && isdir=yes
-     if test "$isdir" = yes; then
-       destdir="$dest"
-       destname=
-     else
-       destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-       test "X$destdir" = "X$dest" && destdir=.
-       destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-       # Not a directory, so check to see that there is only one file specified.
-       set dummy $files
-       if test "$#" -gt 2; then
-         $echo "$modename: \`$dest' is not a directory" 1>&2
-         $echo "$help" 1>&2
-         exit $EXIT_FAILURE
-       fi
-     fi
-     case $destdir in
-     [\\/]* | [A-Za-z]:[\\/]*) ;;
-     *)
-       for file in $files; do
-         case $file in
-         *.lo) ;;
-         *)
-           $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-           $echo "$help" 1>&2
-           exit $EXIT_FAILURE
-           ;;
-         esac
-       done
-       ;;
-     esac
-     # This variable tells wrapper scripts just to set variables rather
-     # than running their programs.
-     libtool_install_magic="$magic"
-     staticlibs=
-     future_libdirs=
-     current_libdirs=
-     for file in $files; do
-       # Do each installation.
-       case $file in
-       *.$libext)
-         # Do the static libraries later.
-         staticlibs="$staticlibs $file"
-         ;;
-       *.la)
-         # Check to see that this really is a libtool archive.
-         if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-         else
-           $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-           $echo "$help" 1>&2
-           exit $EXIT_FAILURE
-         fi
-         library_names=
-         old_library=
-         relink_command=
-         # If there is no directory component, then add one.
-         case $file in
-         */* | *\\*) . $file ;;
-         *) . ./$file ;;
-         esac
-         # Add the libdir to current_libdirs if it is the destination.
-         if test "X$destdir" = "X$libdir"; then
-           case "$current_libdirs " in
-           *" $libdir "*) ;;
-           *) current_libdirs="$current_libdirs $libdir" ;;
-           esac
-         else
-           # Note the libdir as a future libdir.
-           case "$future_libdirs " in
-           *" $libdir "*) ;;
-           *) future_libdirs="$future_libdirs $libdir" ;;
-           esac
-         fi
-         dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-         test "X$dir" = "X$file/" && dir=
-         dir="$dir$objdir"
-         if test -n "$relink_command"; then
-           # Determine the prefix the user has applied to our future dir.
-           inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-           # Don't allow the user to place us outside of our expected
-           # location b/c this prevents finding dependent libraries that
-           # are installed to the same prefix.
-           # At present, this check doesn't affect windows .dll's that
-           # are installed into $libdir/../bin (currently, that works fine)
-           # but it's something to keep an eye on.
-           if test "$inst_prefix_dir" = "$destdir"; then
-             $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-             exit $EXIT_FAILURE
-           fi
-           if test -n "$inst_prefix_dir"; then
-             # Stick the inst_prefix_dir data into the link command.
-             relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
-           else
-             relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
-           fi
-           $echo "$modename: warning: relinking \`$file'" 1>&2
-           $show "$relink_command"
-           if $run eval "$relink_command"; then :
-           else
-             $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-             exit $EXIT_FAILURE
-           fi
-         fi
-         # See the names of the shared library.
-         set dummy $library_names
-         if test -n "$2"; then
-           realname="$2"
-           shift
-           shift
-           srcname="$realname"
-           test -n "$relink_command" && srcname="$realname"T
-           # Install the shared library and build the symlinks.
-           $show "$install_prog $dir/$srcname $destdir/$realname"
-           $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-           if test -n "$stripme" && test -n "$striplib"; then
-             $show "$striplib $destdir/$realname"
-             $run eval "$striplib $destdir/$realname" || exit $?
-           fi
-           if test "$#" -gt 0; then
-             # Delete the old symlinks, and create new ones.
-             # Try `ln -sf' first, because the `ln' binary might depend on
-             # the symlink we replace!  Solaris /bin/ln does not understand -f,
-             # so we also need to try rm && ln -s.
-             for linkname
-             do
-               if test "$linkname" != "$realname"; then
-                 $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                 $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-               fi
-             done
-           fi
-           # Do each command in the postinstall commands.
-           lib="$destdir/$realname"
-           cmds=$postinstall_cmds
-           save_ifs="$IFS"; IFS='~'
-           for cmd in $cmds; do
-             IFS="$save_ifs"
-             eval cmd=\"$cmd\"
-             $show "$cmd"
-             $run eval "$cmd" || {
-               lt_exit=$?
-               # Restore the uninstalled library and exit
-               if test "$mode" = relink; then
-                 $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-               fi
-               exit $lt_exit
-             }
-           done
-           IFS="$save_ifs"
-         fi
-         # Install the pseudo-library for information purposes.
-         name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-         instname="$dir/$name"i
-         $show "$install_prog $instname $destdir/$name"
-         $run eval "$install_prog $instname $destdir/$name" || exit $?
-         # Maybe install the static library, too.
-         test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-         ;;
-       *.lo)
-         # Install (i.e. copy) a libtool object.
-         # Figure out destination file name, if it wasn't already specified.
-         if test -n "$destname"; then
-           destfile="$destdir/$destname"
-         else
-           destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-           destfile="$destdir/$destfile"
-         fi
-         # Deduce the name of the destination old-style object file.
-         case $destfile in
-         *.lo)
-           staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-           ;;
-         *.$objext)
-           staticdest="$destfile"
-           destfile=
-           ;;
-         *)
-           $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-           $echo "$help" 1>&2
-           exit $EXIT_FAILURE
-           ;;
-         esac
-         # Install the libtool object if requested.
-         if test -n "$destfile"; then
-           $show "$install_prog $file $destfile"
-           $run eval "$install_prog $file $destfile" || exit $?
-         fi
-         # Install the old object if enabled.
-         if test "$build_old_libs" = yes; then
-           # Deduce the name of the old-style object file.
-           staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-           $show "$install_prog $staticobj $staticdest"
-           $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-         fi
-         exit $EXIT_SUCCESS
-         ;;
-       *)
-         # Figure out destination file name, if it wasn't already specified.
-         if test -n "$destname"; then
-           destfile="$destdir/$destname"
-         else
-           destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-           destfile="$destdir/$destfile"
-         fi
-         # If the file is missing, and there is a .exe on the end, strip it
-         # because it is most likely a libtool script we actually want to
-         # install
-         stripped_ext=""
-         case $file in
-           *.exe)
-             if test ! -f "$file"; then
-               file=`$echo $file|${SED} 's,.exe$,,'`
-               stripped_ext=".exe"
-             fi
-             ;;
-         esac
-         # Do a test to see if this is really a libtool program.
-         case $host in
-         *cygwin*|*mingw*)
-             wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-             ;;
-         *)
-             wrapper=$file
-             ;;
-         esac
-         if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-           notinst_deplibs=
-           relink_command=
-           # Note that it is not necessary on cygwin/mingw to append a dot to
-           # foo even if both foo and FILE.exe exist: automatic-append-.exe
-           # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-           # `FILE.' does not work on cygwin managed mounts.
-           #
-           # If there is no directory component, then add one.
-           case $wrapper in
-           */* | *\\*) . ${wrapper} ;;
-           *) . ./${wrapper} ;;
-           esac
-           # Check the variables that should have been set.
-           if test -z "$notinst_deplibs"; then
-             $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-             exit $EXIT_FAILURE
-           fi
-           finalize=yes
-           for lib in $notinst_deplibs; do
-             # Check to see that each library is installed.
-             libdir=
-             if test -f "$lib"; then
-               # If there is no directory component, then add one.
-               case $lib in
-               */* | *\\*) . $lib ;;
-               *) . ./$lib ;;
-               esac
-             fi
-             libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-             if test -n "$libdir" && test ! -f "$libfile"; then
-               $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-               finalize=no
-             fi
-           done
-           relink_command=
-           # Note that it is not necessary on cygwin/mingw to append a dot to
-           # foo even if both foo and FILE.exe exist: automatic-append-.exe
-           # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-           # `FILE.' does not work on cygwin managed mounts.
-           #
-           # If there is no directory component, then add one.
-           case $wrapper in
-           */* | *\\*) . ${wrapper} ;;
-           *) . ./${wrapper} ;;
-           esac
-           outputname=
-           if test "$fast_install" = no && test -n "$relink_command"; then
-             if test "$finalize" = yes && test -z "$run"; then
-               tmpdir=`func_mktempdir`
-               file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-               outputname="$tmpdir/$file"
-               # Replace the output file specification.
-               relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
-               $show "$relink_command"
-               if $run eval "$relink_command"; then :
-               else
-                 $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-                 ${rm}r "$tmpdir"
-                 continue
-               fi
-               file="$outputname"
-             else
-               $echo "$modename: warning: cannot relink \`$file'" 1>&2
-             fi
-           else
-             # Install the binary that we compiled earlier.
-             file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-           fi
-         fi
-         # remove .exe since cygwin /usr/bin/install will append another
-         # one anyway
-         case $install_prog,$host in
-         */usr/bin/install*,*cygwin*)
-           case $file:$destfile in
-           *.exe:*.exe)
-             # this is ok
-             ;;
-           *.exe:*)
-             destfile=$destfile.exe
-             ;;
-           *:*.exe)
-             destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-             ;;
-           esac
-           ;;
-         esac
-         $show "$install_prog$stripme $file $destfile"
-         $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-         test -n "$outputname" && ${rm}r "$tmpdir"
-         ;;
-       esac
-     done
-     for file in $staticlibs; do
-       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-       # Set up the ranlib parameters.
-       oldlib="$destdir/$name"
-       $show "$install_prog $file $oldlib"
-       $run eval "$install_prog \$file \$oldlib" || exit $?
-       if test -n "$stripme" && test -n "$old_striplib"; then
-         $show "$old_striplib $oldlib"
-         $run eval "$old_striplib $oldlib" || exit $?
-       fi
-       # Do each command in the postinstall commands.
-       cmds=$old_postinstall_cmds
-       save_ifs="$IFS"; IFS='~'
-       for cmd in $cmds; do
-         IFS="$save_ifs"
-         eval cmd=\"$cmd\"
-         $show "$cmd"
-         $run eval "$cmd" || exit $?
-       done
-       IFS="$save_ifs"
-     done
-     if test -n "$future_libdirs"; then
-       $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-     fi
-     if test -n "$current_libdirs"; then
-       # Maybe just do a dry run.
-       test -n "$run" && current_libdirs=" -n$current_libdirs"
-       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-     else
-       exit $EXIT_SUCCESS
-     fi
-     ;;
-   # libtool finish mode
-   finish)
-     modename="$modename: finish"
-     libdirs="$nonopt"
-     admincmds=
-     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-       for dir
-       do
-         libdirs="$libdirs $dir"
-       done
-       for libdir in $libdirs; do
-         if test -n "$finish_cmds"; then
-           # Do each command in the finish commands.
-           cmds=$finish_cmds
-           save_ifs="$IFS"; IFS='~'
-           for cmd in $cmds; do
-             IFS="$save_ifs"
-             eval cmd=\"$cmd\"
-             $show "$cmd"
-             $run eval "$cmd" || admincmds="$admincmds
-        $cmd"
-           done
-           IFS="$save_ifs"
-         fi
-         if test -n "$finish_eval"; then
-           # Do the single finish_eval.
-           eval cmds=\"$finish_eval\"
-           $run eval "$cmds" || admincmds="$admincmds
-        $cmds"
-         fi
-       done
-     fi
-     # Exit here if they wanted silent mode.
-     test "$show" = : && exit $EXIT_SUCCESS
-     $echo "X----------------------------------------------------------------------" | $Xsed
-     $echo "Libraries have been installed in:"
-     for libdir in $libdirs; do
-       $echo "   $libdir"
-     done
-     $echo
-     $echo "If you ever happen to want to link against installed libraries"
-     $echo "in a given directory, LIBDIR, you must either use libtool, and"
-     $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-     $echo "flag during linking and do at least one of the following:"
-     if test -n "$shlibpath_var"; then
-       $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-       $echo "     during execution"
-     fi
-     if test -n "$runpath_var"; then
-       $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-       $echo "     during linking"
-     fi
-     if test -n "$hardcode_libdir_flag_spec"; then
-       libdir=LIBDIR
-       eval flag=\"$hardcode_libdir_flag_spec\"
-       $echo "   - use the \`$flag' linker flag"
-     fi
-     if test -n "$admincmds"; then
-       $echo "   - have your system administrator run these commands:$admincmds"
-     fi
-     if test -f /etc/ld.so.conf; then
-       $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-     fi
-     $echo
-     $echo "See any operating system documentation about shared libraries for"
-     $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-     $echo "X----------------------------------------------------------------------" | $Xsed
-     exit $EXIT_SUCCESS
-     ;;
-   # libtool execute mode
-   execute)
-     modename="$modename: execute"
-     # The first argument is the command name.
-     cmd="$nonopt"
-     if test -z "$cmd"; then
-       $echo "$modename: you must specify a COMMAND" 1>&2
-       $echo "$help"
-       exit $EXIT_FAILURE
-     fi
-     # Handle -dlopen flags immediately.
-     for file in $execute_dlfiles; do
-       if test ! -f "$file"; then
-         $echo "$modename: \`$file' is not a file" 1>&2
-         $echo "$help" 1>&2
-         exit $EXIT_FAILURE
-       fi
-       dir=
-       case $file in
-       *.la)
-         # Check to see that this really is a libtool archive.
-         if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-         else
-           $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-           $echo "$help" 1>&2
-           exit $EXIT_FAILURE
-         fi
-         # Read the libtool library.
-         dlname=
-         library_names=
-         # If there is no directory component, then add one.
-         case $file in
-         */* | *\\*) . $file ;;
-         *) . ./$file ;;
-         esac
-         # Skip this library if it cannot be dlopened.
-         if test -z "$dlname"; then
-           # Warn if it was a shared library.
-           test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-           continue
-         fi
-         dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-         test "X$dir" = "X$file" && dir=.
-         if test -f "$dir/$objdir/$dlname"; then
-           dir="$dir/$objdir"
-         else
-           if test ! -f "$dir/$dlname"; then
-             $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-             exit $EXIT_FAILURE
-           fi
-         fi
-         ;;
-       *.lo)
-         # Just add the directory containing the .lo file.
-         dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-         test "X$dir" = "X$file" && dir=.
-         ;;
-       *)
-         $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-         continue
-         ;;
-       esac
-       # Get the absolute pathname.
-       absdir=`cd "$dir" && pwd`
-       test -n "$absdir" && dir="$absdir"
-       # Now add the directory to shlibpath_var.
-       if eval "test -z \"\$$shlibpath_var\""; then
-         eval "$shlibpath_var=\"\$dir\""
-       else
-         eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-       fi
-     done
-     # This variable tells wrapper scripts just to set shlibpath_var
-     # rather than running their programs.
-     libtool_execute_magic="$magic"
-     # Check if any of the arguments is a wrapper script.
-     args=
-     for file
-     do
-       case $file in
-       -*) ;;
-       *)
-         # Do a test to see if this is really a libtool program.
-         if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-           # If there is no directory component, then add one.
-           case $file in
-           */* | *\\*) . $file ;;
-           *) . ./$file ;;
-           esac
-           # Transform arg to wrapped name.
-           file="$progdir/$program"
-         fi
-         ;;
-       esac
-       # Quote arguments (to preserve shell metacharacters).
-       file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-       args="$args \"$file\""
-     done
-     if test -z "$run"; then
-       if test -n "$shlibpath_var"; then
-         # Export the shlibpath_var.
-         eval "export $shlibpath_var"
-       fi
-       # Restore saved environment variables
-       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-       do
-         eval "if test \"\${save_$lt_var+set}\" = set; then
-                 $lt_var=\$save_$lt_var; export $lt_var
-               fi"
-       done
-       # Now prepare to actually exec the command.
-       exec_cmd="\$cmd$args"
-     else
-       # Display what would be done.
-       if test -n "$shlibpath_var"; then
-         eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-         $echo "export $shlibpath_var"
-       fi
-       $echo "$cmd$args"
-       exit $EXIT_SUCCESS
-     fi
-     ;;
-   # libtool clean and uninstall mode
-   clean | uninstall)
-     modename="$modename: $mode"
-     rm="$nonopt"
-     files=
      rmforce=
      exit_status=0
- Line 6547  relink_command=\"$relink_command\""
+ Line 8209  relink_command=\"$relink_command\""
      for arg
      do
        case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
+      -f) RM="$RM $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
+      -*) RM="$RM $arg" ;;
        *) files="$files $arg" ;;
        esac
      done
-    if test -z "$rm"; then
+    test -z "$RM" && \
-      $echo "$modename: you must specify an RM program" 1>&2
+      func_fatal_help "you must specify an RM program"
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
      rmdirs=
      origobjdir="$objdir"
      for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      func_dirname "$file" "" "."
-      if test "X$dir" = "X$file"; then
+      dir="$func_dirname_result"
-        dir=.
+      if test "X$dir" = X.; then
          objdir="$origobjdir"
        else
          objdir="$dir/$origobjdir"
        fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      func_basename "$file"
+      name="$func_basename_result"
        test "$mode" = uninstall && objdir="$dir"
        # Remember objdir for removal later, being careful to avoid duplicates
- Line 6582  relink_command=\"$relink_command\""
+ Line 8242  relink_command=\"$relink_command\""
        fi
        # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
+      if { test -L "$file"; } >/dev/null 2>&1 ||
-        || (test -h "$file") >/dev/null 2>&1 \
+         { test -h "$file"; } >/dev/null 2>&1 ||
-        || test -f "$file"; then
+         test -f "$file"; then
          :
        elif test -d "$file"; then
          exit_status=1
- Line 6598  relink_command=\"$relink_command\""
+ Line 8258  relink_command=\"$relink_command\""
        case $name in
        *.la)
          # Possibly a libtool archive, so verify it.
-        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+        if func_lalib_p "$file"; then
-          . $dir/$name
+          func_source $dir/$name
            # Delete the libtool libraries and symlinks.
            for n in $library_names; do
- Line 6614  relink_command=\"$relink_command\""
+ Line 8274  relink_command=\"$relink_command\""
              *" $dlname "*) ;;
              *) rmfiles="$rmfiles $objdir/$dlname" ;;
              esac
-             test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
              ;;
            uninstall)
              if test -n "$library_names"; then
                # Do each command in the postuninstall commands.
-              cmds=$postuninstall_cmds
+              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-              save_ifs="$IFS"; IFS='~'
-              for cmd in $cmds; do
-                IFS="$save_ifs"
-                eval cmd=\"$cmd\"
-                $show "$cmd"
-                $run eval "$cmd"
-                if test "$?" -ne 0 && test "$rmforce" != yes; then
                   exit_status=1
-                fi
-              done
-              IFS="$save_ifs"
              fi
              if test -n "$old_library"; then
                # Do each command in the old_postuninstall commands.
-              cmds=$old_postuninstall_cmds
+              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-              save_ifs="$IFS"; IFS='~'
-              for cmd in $cmds; do
-                IFS="$save_ifs"
-                eval cmd=\"$cmd\"
-                $show "$cmd"
-                $run eval "$cmd"
-                if test "$?" -ne 0 && test "$rmforce" != yes; then
                   exit_status=1
-                fi
-              done
-              IFS="$save_ifs"
              fi
              # FIXME: should reinstall the best remaining shared library.
              ;;
- Line 6656  relink_command=\"$relink_command\""
+ Line 8294  relink_command=\"$relink_command\""
        *.lo)
          # Possibly a libtool object, so verify it.
-        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+        if func_lalib_p "$file"; then
            # Read the .lo file
-          . $dir/$name
+          func_source $dir/$name
            # Add PIC object to the list of files to remove.
-          if test -n "$pic_object" \
+          if test -n "$pic_object" &&
-             && test "$pic_object" != none; then
+             test "$pic_object" != none; then
              rmfiles="$rmfiles $dir/$pic_object"
            fi
            # Add non-PIC object to the list of files to remove.
-          if test -n "$non_pic_object" \
+          if test -n "$non_pic_object" &&
-             && test "$non_pic_object" != none; then
+             test "$non_pic_object" != none; then
              rmfiles="$rmfiles $dir/$non_pic_object"
            fi
          fi
- Line 6680  relink_command=\"$relink_command\""
+ Line 8318  relink_command=\"$relink_command\""
            noexename=$name
            case $file in
            *.exe)
-            file=`$echo $file|${SED} 's,.exe$,,'`
+            func_stripname '' '.exe' "$file"
-            noexename=`$echo $name|${SED} 's,.exe$,,'`
+            file=$func_stripname_result
+            func_stripname '' '.exe' "$name"
+            noexename=$func_stripname_result
              # $file with .exe has already been added to rmfiles,
              # add $file without .exe
              rmfiles="$rmfiles $file"
              ;;
            esac
            # Do a test to see if this is a libtool program.
-          if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+          if func_ltwrapper_p "$file"; then
-            relink_command=
+            if func_ltwrapper_executable_p "$file"; then
-            . $dir/$noexename
+              func_ltwrapper_scriptname "$file"
+              relink_command=
+              func_source $func_ltwrapper_scriptname_result
+              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+            else
+              relink_command=
+              func_source $dir/$noexename
+            fi
              # note $name still contains .exe if it was in $file originally
              # as does the version of $file that was added into $rmfiles
- Line 6705  relink_command=\"$relink_command\""
+ Line 8352  relink_command=\"$relink_command\""
          fi
          ;;
        esac
-      $show "$rm $rmfiles"
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
-      $run $rm $rmfiles || exit_status=1
      done
      objdir="$origobjdir"
      # Try to remove the ${objdir}s in the directories where we deleted files
      for dir in $rmdirs; do
        if test -d "$dir"; then
-        $show "rmdir $dir"
+        func_show_eval "rmdir $dir >/dev/null 2>&1"
-        $run rmdir $dir >/dev/null 2>&1
        fi
      done
      exit $exit_status
-    ;;
+}
-  "")
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
-    $echo "$modename: you must specify a MODE" 1>&2
+    func_mode_uninstall ${1+"$@"}
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
-  if test -z "$exec_cmd"; then
+test -z "$mode" && {
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  help="$generic_help"
-    $echo "$generic_help" 1>&2
+  func_fatal_help "you must specify a MODE"
-    exit $EXIT_FAILURE
+}
-  fi
-fi # test -z "$show_help"
+ test -z "$exec_cmd" && \
+   func_fatal_help "invalid operation mode \`$mode'"
  if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
+  eval exec "$exec_cmd"
    exit $EXIT_FAILURE
  fi
-# We need to display help for each of the modes.
+exit $exit_status
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
- Provide generalized library-building support services.
-     --config          show all configuration variables
-     --debug           enable verbose shell tracing
- -n, --dry-run         display commands without modifying any files
-     --features        display basic configuration information and exit
-     --finish          same as \`--mode=finish'
-     --help            display this help message and exit
-     --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-     --quiet           same as \`--silent'
-     --silent          don't print informational messages
-     --tag=TAG         use configuration variables from tag TAG
-     --version         print version information
- MODE must be one of the following:
-       clean           remove files from the build directory
-       compile         compile a source file into a libtool object
-       execute         automatically set library path, then run a program
-       finish          complete the installation of libtool libraries
-       install         install libraries or executables
-       link            create a library or an executable
-       uninstall       remove libraries from an installed directory
- MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
- a more detailed description of MODE.
- Report bugs to <bug-libtool@gnu.org>."
-   exit $EXIT_SUCCESS
-   ;;
- clean)
-   $echo \
- "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
- Remove files from the build directory.
- RM is the name of the program to use to delete files associated with each FILE
- (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
- to RM.
- If FILE is a libtool library, object or program, all the files associated
- with it are deleted. Otherwise, only FILE itself is deleted using RM."
-   ;;
- compile)
-   $echo \
- "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
- Compile a source file into a libtool library object.
- This mode accepts the following additional options:
-   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-   -prefer-pic       try to building PIC objects only
-   -prefer-non-pic   try to building non-PIC objects only
-   -static           always build a \`.o' file suitable for static linking
- COMPILE-COMMAND is a command to be used in creating a \`standard' object file
- from the given SOURCEFILE.
- The output file name is determined by removing the directory component from
- SOURCEFILE, then substituting the C source code suffix \`.c' with the
- library object suffix, \`.lo'."
-   ;;
- execute)
-   $echo \
- "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
- Automatically set library path, then run a program.
- This mode accepts the following additional options:
-   -dlopen FILE      add the directory containing FILE to the library path
- This mode sets the library path environment variable according to \`-dlopen'
- flags.
- If any of the ARGS are libtool executable wrappers, then they are translated
- into their corresponding uninstalled binary, and any of their required library
- directories are added to the library path.
- Then, COMMAND is executed, with ARGS as arguments."
-   ;;
- finish)
-   $echo \
- "Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
- Complete the installation of libtool libraries.
- Each LIBDIR is a directory that contains libtool libraries.
- The commands that this mode executes may require superuser privileges.  Use
- the \`--dry-run' option if you just want to see what would be executed."
-   ;;
- install)
-   $echo \
- "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
- Install executables or libraries.
- INSTALL-COMMAND is the installation command.  The first component should be
- either the \`install' or \`cp' program.
- The rest of the components are interpreted as arguments to that command (only
- BSD-compatible install options are recognized)."
-   ;;
- link)
-   $echo \
- "Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
- Link object files or libraries together to form another library, or to
- create an executable program.
- LINK-COMMAND is a command using the C compiler that you would use to create
- a program from several object files.
- The following components of LINK-COMMAND are treated specially:
-   -all-static       do not do any dynamic linking at all
-   -avoid-version    do not add a version suffix if possible
-   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-   -export-symbols SYMFILE
-                     try to export only the symbols listed in SYMFILE
-   -export-symbols-regex REGEX
-                     try to export only the symbols matching REGEX
-   -LLIBDIR          search LIBDIR for required installed libraries
-   -lNAME            OUTPUT-FILE requires the installed library libNAME
-   -module           build a library that can dlopened
-   -no-fast-install  disable the fast-install mode
-   -no-install       link a not-installable executable
-   -no-undefined     declare that a library does not refer to external symbols
-   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-   -objectlist FILE  Use a list of object files found in FILE to specify objects
-   -precious-files-regex REGEX
-                     don't remove output files matching REGEX
-   -release RELEASE  specify package release information
-   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-   -static           do not do any dynamic linking of uninstalled libtool libraries
-   -static-libtool-libs
-                     do not do any dynamic linking of libtool libraries
-   -version-info CURRENT[:REVISION[:AGE]]
-                     specify library version info [each variable defaults to 0]
- All other options (arguments beginning with \`-') are ignored.
- Every other argument is treated as a filename.  Files ending in \`.la' are
- treated as uninstalled libtool libraries, other files are standard or library
- object files.
- If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
- only library objects (\`.lo' files) may be specified, and \`-rpath' is
- required, except when creating a convenience library.
- If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
- using \`ar' and \`ranlib', or on Windows using \`lib'.
- If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
- is created, otherwise an executable program is created."
-   ;;
- uninstall)
-   $echo \
- "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
- Remove libraries from an installation directory.
- RM is the name of the program to use to delete files associated with each FILE
- (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
- to RM.
- If FILE is a libtool library, all the files associated with it are deleted.
- Otherwise, only FILE itself is deleted using RM."
-   ;;
- *)
-   $echo "$modename: invalid operation mode \`$mode'" 1>&2
-   $echo "$help" 1>&2
-   exit $EXIT_FAILURE
-   ;;
- esac
- $echo
- $echo "Try \`$modename --help' for more information about other modes."
- exit $?
  # The TAGs below are defined such that we never get into a situation
  # in which we disable both kinds of libraries.  Given conflicting
  # choices, we go for a static library, that is the most portable,
- Line 6951  exit $?
+ Line 8397  exit $?
  # configuration.  But we'll never go from static-only to shared-only.
  # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
  # ### END LIBTOOL TAG CONFIG: disable-shared
  # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
  # ### END LIBTOOL TAG CONFIG: disable-static
  # Local Variables:
  # mode:shell-script
  # sh-indentation:2
  # End:
+ # vi:sw=2

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.1.1.1
changed lines
	Added in v.1.1.1.2